1-14 Fittings and Accessories

Size: px

Start display at page:

Download "1-14 Fittings and Accessories"

Sabina Banks
5 years ago
Views:

-4 ittings and ccessories entricast Piping Systems NOV iber Glass Systems offers a complete line of fittings manufactured from both epoxy and vinyl ester resins.

1 -4 ittings and ccessories entricast Piping Systems NOV iber Glass Systems offers a complete line of fittings manufactured from both epoxy and vinyl ester resins. These fittings and adhesives provide the same corrosion resistance and temperature ratings as the compatible grade of pipe. Press molded fittings are manufactured from a resin-rich compound which is corrosion resistant throughout the fitting wall. Hand layup fittings have a 00 mil resin-rich corrosion barrier. poxy R fittings are color-coded brown; Z-OR fittings are dark green or black; L vinyl ester fittings are off-white. ecause the fittings are designed for the most severe services, they are suitable for the broad range of chemicals shown in the hemical Resistance Guide. ll -4 fittings are available with either a socket fitting or flanged type connection for easy field assembly. dapters to iron pipe threads are also available. Order by figure (ig.) number prefixed with L for vinyl ester, R for epoxy and Z for Z-ore followed by construction type (if applicable), diameter, and outlet sizes. PM - Represents Press Molded ittings HLU - Represents Hand Layup ittings xample ig. 4 HLU x2 Index ccessories dhesives ssembled itting imensions entriclamp ouplings rosses lbows nd aps langes loor rains How to Read langed or Reducer ittings Laterals Maintenance Repair Kits Pipe Support/Wear Pad Pressure Ratings Reducers Saddles Special onfiguration ,. Take Off imensions Tees Threaded dapters Threaded Inserts fgspipe@nov.com

2 PRSSUR RTINGS Pressure Rating of L Vinyl ster ittings up to 200 based on Weldfast L-200 and/or L-200QS dhesive Uninsulated Piping lbows, Tees, Reducers ouplings, langes, nd aps, Socket and Threaded Nipples Socket tgs. langed tgs. Laterals, rosses, and Saddles Reduce pressure by 2% for to 200 operating temperatures. Pressure Rating of R poxy ittings up to 22 based on Weldfast Z-2 dhesive Uninsulated Piping lbows, Tees, Reducers ouplings, langes, nd aps, Socket and Threaded Nipples Socket tgs. langed tgs. langes Laterals, rosses, and Saddles or insulated and/or heat traced piping systems, use 00% of uninsulated piping recommendations up to 200 and reduce these ratings 0% for 200 to 20 operating temperatures. or uninsulated NTRIST PLUS R-20 piping, reduce these ratings 0% for 22 to 20 operating temperatures. Pressure Rating of Z poxy ittings up to 22 based on Weldfast Z-2 dhesive Uninsulated Piping lbows, Tees, Reducers ouplings, langes, nd aps, Socket and Threaded Nipples Socket tgs. langed tgs. langes Laterals and rosses or insulated and/or heat traced piping systems, use 00% of uninsulated piping recommendations up to 22 and reduce these ratings 2% for 22 to 2 operating temperatures. or uninsulated Z piping, reduce these ratings 2% for 20 to 2 operating temperatures. Note: Quotations for specially fabricated higher pressure fittings are available on request. 2

OUPLINGS ig. 4 Socket ig. 0 RSR Repair oupling Inner oupling and lamp ± PM Ref HLU Ref 2 -- 0. 2 2 4 -- 0. 2 4 6 -- 0. 4 4 6 --.0 4 4 4 --. 6 4 8 --.2 8 -- 4.4 0 8 -- 2 8 -- 2.2 4.0 4* 8 6 -.

3 OUPLINGS ig. 4 Socket ig. 0 RSR Repair oupling Inner oupling and lamp ± PM Ref HLU Ref * Outer oupling ± Split (4 PLS) Ref NIPPLS ig. 6S Iron Pipe Male Thread ig. S* Iron Pipe ± ± THR PTRS ig. 2 Iron Pipe Thread ig. 2S* Iron Pipe Thread x Socket ± / 6 * * * vailable on order only - nonreturnable. L weight, multiply by.0 for R,. for Z ± ±

4 THR INSRT N P ig. S Insert ig. 0 Socket Pipe ap Ref ± 6 x blank* x blank* x blank* x blank* x x x I.P I.P I.P x 2 2 I.P x I.P x I.P. 0.2 x 2 2 I.P..0 x I.P. 0.8 ± ± 6 Ref Ref * * SL ig. Pipe Saddle /2 PIP O.. L PIP O.. ± ± X X X X X X X X X X X X X 2.8 Note: or Threaded Outlets or ement Socket Outlets greater than one size reduction, see ssembled ittings section. igure weights based on blank saddle. Saddles available in L and R only. Wt. * vailable on order only - nonreturnable L weight, multiply by.0 for R,. for Z 4

5 RURS ig. Insert Socket /6 + _ /6 Reducer inserts which reduce greater than two pipe sizes are available on order only. Reducer inserts 8 and larger which reduce greater than one pipe size may have a reduced pressure rating. onsult factory for specific recommendations. /6 + /6 ± 6 ± Ref 2 x x x x x x x x x x x x x ± 6 ± Ref 8 x x x x x x x x x x x x x ig. 4 oncentric Tapered Socket, Hand Layup onstruction ig. 4 () oncentric Tapered Socket Ref ± Ref * vailable on order only - nonreturnable () See ig. 8 for flange dimensions. L weight, multiply by.0 for R,. for Z 2 x * x x x x x x x x x x x x x x x Ref ± 6 2 x * x x x x x x x x x x x x x x x 2*

ig. ccentric Tapered Socket G ig. () ccentric Tapered langed Ref ± Ref x 2 6 2 6 4 2 Ref ± G ± 2 6 6. 4 x 2 6 2 6 2 6 6. 4 x 6 2 6 4 2 6 6.6 6 x 4 2 6 6 6. 6 x 4 6 6. 8 x 4 6 2 2 6. 8 x 6 6 2 6.

8 x 6 2 6 6. 0 x 6 2 6 6 2 0. 0 x 8 2 6 2 6.2 2 x 8 4 6 2 6 2 46.4 2 x 0 4 6 6 4.8 LNGS ig. 8 and ig. 8L* lange Socket ig.

6 ig. ccentric Tapered Socket G ig. () ccentric Tapered langed Ref ± Ref x Ref ± G ± x x x x x x x x x x ± Ref 2 x * 6 6 x Ref x x x x x x x x x x LNGS ig. 8 and ig. 8L* lange Socket ig. 8R * Reducer Socket Ref Ref ± 6 ± 6 olts No/ lange Lip /6 + /6 2 x 2 x x x x Ref Ref ± 6 ± 6 ± 6 olts No/ x x x x x x x x x x x x langes meet O.. bolt circle diameter, number of holes, and bolt hole diameter dimensions for NSI 6. 2 lb. cast iron sizes -2 and NSI 6. lb. steel for -24 diameters. * vailable on order only - nonreturnable () See ig. 8 for flange dimensions. L weight, multiply by.0 for R,. for Z 6

7 ig. 8M* lange Metric Socket ig. 22 lind lange (mm) Ref (mm) Ref (mm) (mm) ±.88 (mm) ±.88 (mm) olts No/ mm mm mm mm mm mm mm mm mm ig 22S (2) Iron Pipe Tapped ± ± ± 6 olts No/ ig. 2/24/2* Van Stone lange ig. 24 ig. 2 Ref Ref ± 6 ± 6 iberglass Ring ± Steel Ring ± lange Lip /4 + / LOWS ig. 2 0 Short Radius lbow, Socket ± 6 ± s - 6 PM onstruction 8 HLU onstruction * vailable on order only - nonreturnable (2) Maximum Iron Pipe Thread size = L weight, multiply by.0 for R,. for Z ig. 2 0 Long Radius lbow, Socket ± 6 ± HLU onstruction

8 ig. 2S* 0 Short Radius lbow, lange x Socket ig. 2 0 Short Radius lbow, langed ± 6 Ref Ref Ref Ref olts No/ ± 6 Ref Ref Ref olts No/ ± 6 Ref Ref Ref olts No/ ig. 2 0 Long Radius lbow, langed ** ig. 2S* 0 Long Radius lbow, lange x Socket ± Ref Ref Ref ± olts No/ * * vailable on order only - nonreturnable ** Tolerance exception - ig. 2 x 4 - ± L weight, multiply by.0 for R,. for Z 8

9 ig Short Radius lbow, Socket ig Short Radius lbow, langed PM ± 6 HLU ± Ref* 2 2 4* * * 6. 4 * * * PM ± 6 HLU ± Ref 6 6* 4 4 Ref 2 4 6* * * * * Ref olts No/ ig. 26S* 4 lbow, lange x Socket G PM ± 6 HLU ± Ref Ref Ref PM ± 6 G HLU ± olts No/ 6 6* * * * * * * vailable on order only - nonreturnable L weight, multiply by.0 for R,. for Z

10 TS PM ± 6 HLU ± PM ± 6 HLU ± ± 2 2 2* * * * * 0 6. ig. 2 Tee, Socket Tolerance xception 2 x 0 ± ± 2 x 2 ± ig. 2 Tee, langed PM ± 6 HLU ± PM ± 6 HLU ± Ref Ref Ref olts No/ PM ± 6 HLU ± Ref 6 4 6* PM available in L only * vailable on order only - nonreturnable L weight, multiply by.0 for R,. for Z * * * * Ref Ref Ref PM ± 6 G HLU ± One lg Two lgs ig. 2S* Tee, langed x Socket G 0

11 LTRLS ig. 266 Lateral, Socket ig. 266* Lateral, langed ± 4 ± 4 ± ± ± Ref Ref Ref Wt. olts No/ Note: Reducing Laterals and crosses are available on request. ROSSS ig. 28 ross, Socket ig. 28* ross, langed ± 4 ± ± Wt ± ± Ref Ref Ref olts No/ * vailable on order only - nonreturnable. L weight, multiply by.0 for R,. for Z

PIP SUPPORT/WR P ig. Pipe Support R L ± T Ref - 6 2 2-6 L 2-2 4 2 0 ±0 T 2-2 4 4 2-4 6-6 4 2 8 4-6 - R 0 6-8- 2-2 8-4* - 2 2 8- *vailable on order only - nonreturnable. 4 2 2 2 2 LOOR RIN ig.

4 4 2 x 4 8 6 4 2 6 8 2 2 4 4 4 2 2 x 6 8 6 6 6 8 2 2 4 4 4 2 2 x 8 8 8 6 8 2 2 4 4 4 2 Note: Standard outlet straight socket. 2-6 NPT outlet available on request.

12 PIP SUPPORT/WR P ig. Pipe Support R L ± T Ref L ±0 T R * *vailable on order only - nonreturnable LOOR RIN ig. 20 Sealable loor rain Sealable rain imensional ata ± ± G H I 6 x / 4 20 UN x / 8 P 6 SS insert places on bolt circle /2 + /8 > 0 I H G /4 6 x x x x x Note: Standard outlet straight socket. 2-6 NPT outlet available on request. Sealable rain Standard onfigurations Viton escription igure Plug 4 Solid over Plate with O-Ring Seal lean Out 20O 4 rilled rain Grate 6 Gauge Strainer asket loor rain 20 quipment rain 20 ig. Reducer Insert required for 6x2, 6x, 2x4 and 2x6 sizes. 2

13 NTRILMP Physical ata ig. 8 S.S. lamp ig. 6 nd dapter O-Ring Pressure Rating Max Rec. Torque (In-Lbs.) Precision O-Ring Wrench Pipe ig. 6 nd dapter Ref Ref ig. 6* nd dapter ig. 8* SS lamp ig. * lind lange 4 Ref Ref No. Nut(s) Ref Ref * vailable on order only - nonreturnable. L weight, multiply by.0 for R,. for Z

14 SSML ITTINGS RRN IMNSIONS ig. 8* Reducer Socket ig. 6* dapter Iron Pipe Male x Socket emale Ref Ref 2 x x 4 2 x 2 4 x x x x x 4 8 x ssemble using ig. 4 Socket oupling and ig. Reducer ushing ig. 244* Nipple lange Iron Pipe Thread Ref Ref ssemble using ig. 8 Socket lange and ig. 6S Iron Pipe dapter ig. * Pipe Saddle Ref ssemble using ig. 6S dapter and ig. 4 Socket oupling ig. Stub lange ± ± ssemble using ig. 8 Socket lange and ig. Pipe Stub ±¼ ± * vailable on order only - nonreturnable. L weight, multiply by.0 for R,. for Z /2 PIP O.. L PIP O.. Threaded Outlet NPT ement Outlet ¼ ½ ¾ ¼ ½ ¾ ¼ ¾ 2 S ¾ 2 X X X X X X V V S XV XV XV X XV X V V S S 6 2 XV XV XV XV XV XV W W S V S 8 0 ½ 2 6 XV XV XV XV XV XV W W S V V S 0 ½ 0 XV XV XV XV XV XV W W S V V V S XV XV XV XV XV XV W W S V V V V S X=abricated using ig ement Socket Outlet Pipe Saddle and ig S Threaded ushing Insert. V=abricated using ig ement Socket Outlet Pipe Saddle and ig Socket Reducer ushing Insert. S=Standard Pipe Saddle, no fabrication needed. XV=abricated using ig ement Socket Outlet Pipe Saddle, ig Socket Reducer ushing and ig S Threaded ushing Insert. W=abricated using ig ement Socket Outlet Pipe Saddle and 2 or more ig Socket Reducer ushing Inserts. 4

15 ig. 2R* 0 Short Radius Reducer, Socket ig. 2R* 0 Long Radius Reducer, Socket Ref Ref Ref Ref ssemble using ig. 2 lbow and ig. Reducer ushing ssemble using ig. 2 lbow and ig. Reducer ushing ig. 2R* 0 Long Radius Reducer, langed ig. 2R* 0 Short Radius Reducer, langed Ref Ref Ref Ref Ref olts No/ Ref Ref Ref Ref 6 x Ref olts No/ x x x x x x x x ssemble using ig. 2 lbow, ig. Reducer ushing, ig. Pipe Stub and ig. 8 Socket lange 8 x ssemble using ig. 2 lbow and ig. Reducer ushing, ig. Pipe Stub and ig. 8 Socket lange ig. 26R () 4 Reducer, Socket ig. 26R ()* 4 Reducer, langed PM± 6 HLU± PM Ref ssemble using ig. 26 lbow and ig. Reducer ushing HLU Ref / PM available in L only * vailable on order only - nonreturnable. () Reductions beyond one pipe size for reduced pressure applications are available. (See ig. ) PM± 6 HLU± Ref 2 x Ref 2 x x x x x Ref Ref olts No/ x x ssemble using ig. 26 lbow and ig. Reducer ushing, Pipe Stubs and ig 8 Socket langes

16 ig. 2R* Reducer, Socket ssemble using ig 2 and ig Reducer ushing PM ± 6 HLU ± PM Ref HLU Ref ig. ssembly Pipe Stubs ig. * dapter Nipple Ref Ref ig. 2R () * Reducer, langed Single Reduction Shown J PM Ref HLU Ref Ref 2 x Ref 2 x x x x Ref J Ref PM available in L only * vailable on order only - nonreturnable. () Reductions beyond one pipe size for reduced pressure applications are available. (See ig. ) 8 x x x

17 IMNSIONS Take off imensions for dhesive Socket ittings ig lbow Pipe Stop to ittings enter Line imensions PM 6 4 lbow HLU ig. 2 0 Short or Long Radius lbow Short Radius 0 lbow Tee ig. 2 Long Radius 0 lbow Tee Lateral ross PM HLU Lateral ig. 266 ross ig How to Read langed or Reducing ittings ROSS T Run x Run x ranch ( x x ) Run x Run x ranch x ranch ( x x x ) Run x Run x ranch ( x x ) The sequences illustrated should be used when describing fitting outlets. rawings or sketches showing outlet types, locations, sizes and dimensional requirements are required for more complicated fitting configurations. /6 through 2 Orifice flanges, 0# & 00# Odd degree elbows,, 22 /2, 0 & 60 degree Socket & langed lbows Sump ittings 4 thru 0 Reducing Lateral, Socket, ig. 266R 2 thru 2 ig 26 Long Turn Tee, Socket, ig. 26 Special onfiguration ittings ontact NOV iber Glass Systems for etails 2 thru 2 Long Turn Tee, langed, ig 26 2 thru 2 4 ouble Y ranch, Socket, ig thru 2 4 ouble Y ranch, langed, ig thru 2 0 ouble Y ranch, Socket, ig thru 2 0 ouble Y ranch, langed, ig. 26

HSIVS Weldfast Z-2 poxy dhesive for dhesive Socket Joints Order for Z-ore epoxy piping systems. Weldfast Z-2 adhesive can also be used to bond R and L pipe and fittings.

ontents: dhesive (Part ) Hardener (Part ) Wooden Stir Stick Plastic Putty Knife abrication Instructions No.

instructions, refer to fab ulletin 400 included in each kit of WLST Z-2 dhesive. Weldfast L-200-QS Part ccelerator used with WLST L-200 to provide a quick set vinyl ester adhesive.

18 HSIVS Weldfast Z-2 poxy dhesive for dhesive Socket Joints Order for Z-ore epoxy piping systems. Weldfast Z-2 adhesive can also be used to bond R and L pipe and fittings. Usage should be limited to applications recommended for both Z-ore product and the pipe and fittings grade being used. ontents: dhesive (Part ) Hardener (Part ) Wooden Stir Stick Plastic Putty Knife abrication Instructions No. Kit -½ Pint Number of onds Per Kit Joints Pipe 2 connections 0 2 connections 8 2 connections connections 4 connections 2 6 connections 8 connections 2 0 connections 2 2 connections or complete instructions, refer to fab ulletin 400 included in each kit of WLST Z-2 dhesive. Weldfast L-200-QS Part ccelerator used with WLST L-200 to provide a quick set vinyl ester adhesive. Joints fabricated with this quick set adhesive can be made and quickly cured in as little as one hour (at room temperature) compared to 24 hours (at room temperature) for conventional adhesives. Weldfast L-200 ontents: dhesive (Part ) atalyst Wooden Stir Stick Plastic Putty Knife abrication Instructions Order for L-200 and L-20 vinyl ester piping systems. No. Kit -½ Pint Number of onds Per Kit Joints Pipe 2 connections 0 2 connections 8 2 connections connections 4 connections 2 6 connections 8 connections 2 0 connections 2 2 connections 4 connections or complete instructions refer to fab ulletin 420 included in each kit of WLST L

19 SSORIS Strap lamp Kit* Silicone Rubber Heat lanket* or Heat uring -20 connections Pipe Model Number for Pipe - inches 4-8 inches 0-4 inches 6-20 inches * vailable on order only - nonreturnable

20 National Oilwell Varco has produced this brochure for general information only, and it is not intended for design purposes. lthough every effort has been made to maintain the accuracy and reliability of its contents, National Oilwell Varco in no way assumes responsibility for liability for any loss, damage or injury resulting from the use of information and data herein nor is any warranty expressed or implied. lways cross-reference the bulletin date with the most current version listed at the web site noted in this literature. North merica South merica urope sia Pacific Middle ast San Pedro ve. Suite 200 strada de cesso á Zona P.O. ox 6, 40 No., Tuas venue P.O. ox 24 San ntonio, Texas 822 US Industrial Portuária de Suape, s/no. Geldermalsen, The Netherlands Jurong, Singapore 640 ubai, U Phone: Recife, P, razil Phone: Phone: Phone: Phone: fgspipe@nov.com 20 National Oilwell Varco. ll rights reserved. I60 July 20

SILVER STREAK FITTINGS DIMENSIONS

SILVER STREAK FITTINGS DIMENSIONS SILVER STREK FITTINGS DIMENSIONS Silver Streak piping and fittings are designed especially for abrasive and corrosive services such as limestone and gypsum slurries, found in flue gas desulfurization (FGD)