Compression Fittings 36 Series Metric

Transcription

1 6 Series 4 mm 28 mm O/ l l l l Wide range of types and sizes Rugged and durable Suitable for use under extreme conditions of pressure and temperature Ideal for most general industrial applications Technical ata Medium: Compressed air*. *Consult our Technical Service for use with other fluids. Operating Pressure: The maximum working pressure is limited by the type of tubing being used. Refer to Section 9.2 for details. Operating Temperature: The maximum working temperature is limited by the type of tubing being used. Refer to Section 9.2 for details. Tube Sizes: 4, 5, 6, 8, 0, 2, 5, 6, 8, 22, 28 mm O/. Tubing: Nylon or 2 and other plasticised or unplasticised tubing which conforms to the tolerances specified in S 5409: Part 976. Copper, annealed and half-hard to S 287: Part 2. ouble wall brazed steel. Ordering Information To order, quote appropriate product number from the tables on the following pages. Materials rass to S 2874: 986 (CZ2) for tubing nut, sleeve and body manufactured from bar. rass to S 2872: 969 (CZ22) for body manufactured from stamping. anjo bolts have a bright nickel plated finish. N/L

2 Straight Connectors and daptors STM TILPIC PTOR Tube stem to hose FML TILPIC PTOR Tube to hose STRIHT STM PTOR Tube stem to male parallel SP thread STRIHT STM PTOR Tube stem to male taper SP thread 6 05 NIPPL STM CONNCTOR Male to stem RUCIN CONNCTOR ULKH CONNCTOR Female Page Page Page Page Page Page Page NIPPL CONNCTOR Male ML CONNCTOR Male to male UNQUL CONNCTOR STRIHT CONNCTOR Female RCKT STRIHT CONNCTOR Female MTRIC TO INCH PTOR Male to female NIPPL PTOR Male to metric and UNF female thread Page Page Page Page Page Page Page NIPPL PTOR Male to male taper SP thread NIPPL PTOR Male to female parallel SP thread STRIHT ML PTOR taper SP thread STRIHT ML PTOR (NPTF) NPTF thread STRIHT ML PTOR thread ML PTOR STRIHT ML PTOR parallel SP thread Page Page Page Page Page Page Page STRIHT PTOR Female to female parallel SP thread HOS STRIHT CONNCTOR Male parallel SP thread Page Page lbow Connectors and daptors UNIVRSL STM LOW Tube stem STM LOW CONNCTOR Female to stem LOW CONNCTOR Female 6 05 RCKT LOW CONNCTOR Female FML LOW PTOR Female to female parallel SP thread ML LOW PTOR taper SP thread ML LOW PTOR NPTF thread 6 0 Page Page Page Page Page Page Page HOS LOW PTOR parallel SP thread Page Tee, Y and Four Way Connectors and daptors STM T CONNCTOR Female to stem STM T CONNCTOR Female to stem 6 06 SI STM T CONNCTOR Female to stem 6 05 T CONNCTOR Female RCKT T CONNCTOR Female ML T PTOR taper SP thread ML SI T PTOR taper SP thread Page Page Page Page Page Page Page Y CONNCTOR Female FOUR WY CONNCTOR Female HOS T PTOR parallel SP thread Page Page Page N/L

3 Manifolds SINL SI MNIFOL OUL SI MNIFOL Page Page anjos LOW NO SSMLY Non regulating SPP bolt parallel SP thread LOW NO SSMLY Regulating SPP bolt parallel SP thread T NO SSMLY Non regulating SPP bolt parallel SP thread LOW NO OY Tube T NO OY Tube NO OLTS Regulating NO OLTS Non-regulating Page Page Page Page Page Page Page ccessories FORM CUTTR TP TUIN PLU Male thread ULKH LOCKNUT HOS CON LOCKNUT Female parallel SP thread HOS SL Female SLIN WSHRS For use with banjo fitting Page Page Page Page Page Page Page UNIVRSL TUIN SLV TUIN SLV TUIN NUT FOL COPPR WSHR O RIN SL Page Page Page Page Page N/L

4 ssembly etails Tubing Nut Tubing Sleeve ody Tube Stop Method of ssembly. nsure that the is cut square and is free from fraze. 2. Place the tubing nut and sleeve on the and push the into the fitting until it bottoms on the stop.. Holding the firmly in contact with the stop screw the tubing nut down finger tight and then tighten a further -/4 full turns. Slacken off the assembly and then pinch down again. The method of preparation and assembly described will ensure leak-proof joints over a wide pressure range, depending upon the size and type of tubing being used. Failure to follow this guide, or over-tightening at any joint, will only lead to damage of the fittings or an unsatisfactory seal. Instructions For Machining Where for some reason, such as saving overall space, it is desired to dispense with the male adaptor and fit a, complete with its associated nut and sleeve, direct into a casting, this may be done as illustrated below, by machining the correct form and thread with the appropriate size of form cutter and tap.. RILL It is difficult to recommend specific drill sizes to suit our range of form cutters and taps without having detailed knowledge of the material to be machined and details of the particular installation. s a general rule, however, when preparing for an nots compression assembly, a drill size of mm less in diameter than the tubing size should be used, up to and including 8 mm. For larger tubing, a drill of approximately 2 mm less in diameter is recommended. 2. FORM The correct form cutter should be selected from the table overleaf for the outside diameter tubing being used.. TP The correct size thread tap should be selected from the table overleaf for the outside diameter tubing being used. Owing to the fine pitch of the threads used, only a plug tap is required. 4. SSMLY The, or stem fittings, with appropriate tubing nut and sleeve, can now be assembled into the port. We can advise on individual problems but we cannot be held responsible for failures due to non-observance of the dimensions and tolerances which we lay down for these compression unions. N/L

5 Torque Figures Recommended torque using series sleeves O.. Half nnealed Nylon ouble Wall hard copper & 2 razed Steel copper 4 4,5 Nm,4 Nm 2,8 Nm 5,7 Nm 5 6,8 Nm 5,7 Nm 5,7 Nm - 6 9,0 Nm 7,9 Nm 5,7 Nm 0,2 Nm 8, Nm 7,9 Nm 7,9 Nm 2,4 Nm 0 2,5 Nm 8, Nm,6 Nm 2,5 Nm 2 24,9 Nm 22,6 Nm 5,8 Nm 27, Nm 5 4,0 Nm 28,0 Nm 25,0 Nm ,0 Nm,0 Nm 26,0 Nm ,0 Nm 5,0 Nm 45,0 Nm ,0 Nm 68,0 Nm 46,0 Nm ,0 Nm 68,0 Nm 96,0 Nm - Conversion: Nm x 0,74 = lbf ft Typical imensions Hose stem to with reducing connector W F V F W O.. F V W thread details 4 M8 x,0 0,5 8, 6,0 5 M0 x,0 2,0 9,5 6,5 6 M x,0 2,0 9,4 7,0 8 M x,0 5,0,7 8,0 0 M5 x,0 6,5 2,7 8,0 2 M8 x,5 7,0,4 9,0 5 M22 x,5 8,5 6,0 0,0 6 M24 x,5 9,0 6,2 0,5 8 M26 x,5 20,0 7,0 0,5 22 M0 x,5 24,5 20,5,0 28 M8 x,5 0,0 25,8 2,5 F V = outside diameter size and thread details.* = or stem length inside fitting. = nippled connector length inside fitting. W = projection of tubing nut from compression joint. ll these dimensions are common to a particular tubing outside diameter size. Refer to later pages in this section for details of individual coupling dimensions. imensions V & W will vary with the torque applied so these dimensions are guidance only. *Note: The O/ sizes in the following tables refer to the nots compression threads listed above. N/L

6 T Form Cutter Tap F Product F K number O/ ,5 2, ,0 2, ,0 2, ,0 2, ,5 2, ,0 2, ,0 20, ,5 20, ,0 20,0 Plug taps only available Product For number O/ thread M8 x, M0 x, M x, M x, M5 x, M8 x, M24 x, M0 x, M8 x,5 Tubing Plug Male O/ thread Stem Tailpiece daptor O/ stem to hose Product number O/ /F , , , , , , , , , , ,5 4 L C Product C L S number O/ hose stem bore ,0 6,5 7,5, ,0 8,5 7,0 2, , 40,5 7,5 4, , 4,5 7,5 4, ,0 47,0 9,0 7, ,0 49,0 9,0 7, ,5 54,8 20,0 9, ,0 64,7 22,7 5, ,0 76,0 24,0 2,5 Female Tailpiece daptor Tube to hose Straight Stem daptor O/ stem to male parallel SP thread L ØM C Product C L S number O/ hose /F bore , , , , , ,5 Product M S T number O/ SPP /F stem /8" 6 7, /8" 40 7, /4" 42 9, /4" 45 9, /8" 49 24, /8" 5 24, /2" , /4" 7 6 6, " , Sealing washers should be ordered separately, see pages N/L

7 Straight Stem daptor O/ stem to male taper SP thread Nippled Stem Connector Male O/ to O/ stem T T Product S T number O/ thread /F stem SPP /8" 5 9, /8" 7 9, /8" 40 9, /4" 42 4, /4" 45 4, /4" 47 4, /8" , /8" 5 9 2,7 9 0 Product S T number O/ O/ /F stem 6 O ,0 0,0,0 2,0 6 O ,0,0 4,0 2,0 6 O ,5,0 5,0 26,0 6 O ,0 7,0 7,0 28,0 6 O ,5 9,0 9,0 0,0 Reducing Connector Female O/ to male O/ ulkhead Connector Female O/ Product S number O/ O/ /F ,0 0 2, ,0 2, ,5 2, ,0, ,5, ,0 7, ,5 9, ,0 24, ,0 4, ,0 7 4, ,5 9 4, ,5 22 6, ,0 24 4, ,5 7 6, ,5 9 6, ,0 24 6, ,0 9 7, ,0 22 6, ,0 24 7, ,0 24 9, ,5 0 9, ,5 4 9, ,5 0, ,5 4, ,5 4 9,0 N Product N P S ulkhead Locknut number O/ /F max. thread clearance number bulkhead drilling M2 x,0 2, M5 x,0, M5 x,0 4, M8 x,5 6, M20 x,5 7, M24 x,5 9, M0 x,5, M8 x,5 9, M48 x,5 25, Minimum ulkhead thickness,0. Locknuts should be ordered separately, see next page. P N/L

8 ulkhead Locknut Nippled Connector Male O/ P Product P number thread /F M2 x, M5 x, M8 x, M20 x, M24 x, M0 x, M8 x, M48 x, Product S number O/ /F ,0 8 2, ,4 0, ,4 4, ,0 5, ,0 7 7, ,5 9 9,0 Male Connector Male to male Unequal Connector Female O/ to male O/ Product S number thread /F M5 x 0, Sealing washers should be ordered separately, quote: Product S number O/ O/ /F , , , , , , , , , ,5 Straight Connector Female O/ racketed Straight Connector Female O/ ØQ ØK R Product S number O/ /F ,0 0 2, ,0, ,0 4, ,0 7 6, ,0 9 7, ,0 22 9, ,0 27 2, ,0 27, ,5 2 5, ,0 6 9, , ,0 Product K Q R S number O/ ,0 4,9 0, 5,2 x,9 5,5, ,0 22,2 4, 6,75 x 5,9 8,7 4, ,0 22,2 4, 6,75 x 5,9 8,7 4, , 24,6 7,5 6,75 x 9,0 9,5 6, ,0 25,4 2,8 6,75 x 25,4, 8, ,0 29,4 2,8 6,75 x 25,4, 0,0 N/L

9 to Inch daptor Inch O/ male to metric O/ female Nippled daptor Male to metric and UNF female thread Product S number O/ O/ /F Y /8" 8,5 0, /2" 7,5 0 2,4 /6" 22,0 0 2, /6" 24,0 2, /6" 27,0 2, /4" 20,0 2, /4" 2,5, /4" 25,5 7, /6" 25,0 7 6, /8" 28,0 9 6, /2" 2,0 22 9, /8" 4,5 0, /4" 6,0 0, /4" 48,5 6 6, /8" 45,0 6 9, ,0 54, ,0 Product S V number O/ thread /F M8 x,0 2,5,0 4,0 8, M0 x,0 26,0 4,0 4,0, M4 x,4 27,5 9,0 4,0, UNF 5,0 8,0 2,2 7,0 Nippled daptor Male O/ to male taper SP thread Nippled daptor Male O/ to female parallel SP thread Product S number O/ thread /F SP /8" 26,0 9,5 2, /8" 27,5 9,5, /8" 27,5 9,5 4, /8" 0,0 4 9,5 5, /4" 28,5 4, 2, /4" 0,0 4,, /4" 0,0 4, 4, /4" 2,0 4, 5, /4",5 7, 6, /8" 7,0 9 2,7 5, /8" 8,0 9 2,7 7, /8" 40,0 9 2,7 9, /2" 44,0 22 5,9 9,0 Product S number O/ thread /F SP /8" 24,0 7,5 2, /8" 24,5 7,5, /8" 24,5 7,5 4, /4" 28,0 7,0 4, /4" 0,0 7,0 5, /4",5 7,0 7, /8" 0,5 22,5 5, /4" 2,0 22,5 7, /8" 4,0 22,5 9, /2" 9,5 27 5,0 9,0 N/L

10 Straight Male daptor Female O/ to male taper SP thread Straight Male daptor (NPTF) Female O/ to male NPTF thread Product S number O/ thread /F Product S number O/ thread /F SP /8" 8,5 9,5 2,8 NPTF /8" 9,0 9,5, /8" 20,0 9,5, /8" 20,0 4 9,5 4, /8" 20,0 4 9,5 4, /8" 26,5 7 9,5 4, /8" 26,5 7 9,5 4, /4" 22,0 4 4,, /8" 28,0 9 9,5 4, /4" 22,5 4 4, 4, /4" 8,0 4, 2,8 /4" 2,6 4,, /4" 26,0 7 4, 6,0 /4",0 9 4, 7, /4" 2,6 4, 4, /4" 4,0 22 4, 8, /4" 2,0 7, 6, /8" 2,0 9 4, 6, /4" 0,0 9, 7, /8" 27,0 9 4, 7, /4", 22, 6, /8",0 22 4, 9, /8" 2,0 9 2,7 4, /2" 26,0 24 9,0 7, /8" 2,0 9 2,7 6, /2",0 24 9,0 9, /8" 26,0 9 2,7 8, /2" 40,0 0 9,0 2, /8" 29,0 22 2,7 9, /8" 5,0 0 2,7 0, /2" 25,0 22 5,9 6, /2" 27,0 22 5,9 8, /2" 0,0 22 5,9 0, /2",0 27 5,9 2, /2" 8,5 0 5,9, /4",0 0 9,5 0, /4" 5,0 0 9,, /4" 5,0 2 9,0 5, Straight Male daptor Female O/ to metric male thread Male daptor Male metric to male taper SP thread ØM Product M S number O/ thread /F M8 x,0 9 8, 2,0 2, M8 x,0 2 8,0 2,0, M0 x, ,0,5, M0 x, , 4,0 4, M2 x, , 6,5 4, M2 x, , 6,5 5, M2 X, ,0 6,5 5, M4 X, , 8,5 6, M6 X, , 2,0 7,6 Product S number thread SPT thread M5 x 0,8 /8" ,5 5,0 2,0 Sealing washers should be ordered separately, quote N/L

11 Straight Male daptor Female O/ to male parallel SP thread Straight daptor Female O/ to female parallel SP thread ØM Product M S number O/ thread /F SP /8" 5 7,4 2, /8" 8 7,4, /8" 2 7 7,4 4 4, /8" ,4 4 5, /4" 8 9,0 8 2, /4" 20 9,0 8, /4" 2 9,0 8 4, /4" 25 9,0 8 6, /4" 0 9,0 8 7, /4" 0 22,0 8 7, /8" 22 22,4 2,5 4, /8" 2 24,4 22 6, /8" 24 24,4 22 7, /8" 29 24,4 22 9, /8" 4 27,4 22 0, /2" ,0 26 6, /2" ,0 26 7, /2" ,0 26 9, /2" ,0 26, /2" ,0 26, /4" 2 6 6, 2, /4" 4 6 6, 2 9, /4" , 2 9, " , 9 9, " , 9 25,0 Product S number O/ thread /F SP /8" 2 9,5 2, /8" 25 9,5, /8" 25 9,5 4, /8" ,5 6, /4" 27 7,0, /4" 27 7,0 4, /4" 0 7,0 6, /4" 9,0 7, /8" ,7 6, /8" 22 2,7 7, /8",5 22 2,7 9, /2" ,0 9, /2" 8 0 6,0, /4" ,5 9, " ,0 25,0 Sealing washers should be ordered separately, see pages Universal Stem lbow O/ stem Stem lbow Connector Female O/ to O/ stem K Product K S number O/ stem ,8, 5,0 Product K S number O/ O/ stem ,5 4, ,6 4, ,9 7, , 2, ,5 2, ,0 0,0 2 N/L

12 lbow Connector Female O/ racketed lbow Connector Female O/ Ø S Ø S R Ø Q R Product S number O/ /F ,5, 2, ,5 2,7, ,0 4, 4, ,0 6,0 6, ,0 20,0 7, ,0 24,0 9, ,0 27,8 2, ,0 27,8, ,0 0,9 5, ,0 6,5 9, ,0 47,6 25,0 Product K Q R S number O/ stem ,5 0, 5,2 x,9 7,, ,8,5 6,75 x 6,7 6,7 4, ,0 6,7 6,75 x 9,0 7,8 4, ,2 6,7 6,75 x 9,0 7,8 6, ,4 22,2 6,75 x 25,4,2 8, ,0 22,2 6,75 x 25,4,2 0,0 Female lbow daptor Female O/ to female parallel SP thread Product K S number O/ thread /F stem SPP /8" 7,4 4,0 2,5 2,7 2, /8" 7,4 5,5 2,5 2,7, /4",0 6,0 7,5 7,5 4, /4",0 20,0 8,5 7,5 6, /4",0 22,0 8,5 20,6 7, /8",4 2,5 22,0 20,6 7, /8",4 24,5 22,0 2,8 9, /8",4 28,0 22,0 28,5, /2" 5,0 24,5 26,0 24,6 9, /2" 5,0 28,0 29,0 28,5,6 N/L

13 Male lbow daptor Female O/ to male taper SP thread Male lbow daptor Female O/ to male NPTF thread K K Product K S number O/ thread SP /8" 9,5 4,9 5,5, 4, /8" 9,5 6,5 7,0 2,7 4, /8" 9,5 6,5 8,2 4, 4, /8" 9,5 20,0 20,0 5,9 4, /4", 5,7 9,8 4, 6, /4", 6,5 9,8 4, 6, /4", 7,2 9,0 4, 6, /4", 20,6 2,0 5,9 6, /4", 2,0 2,0 20,6 6, /4", 22,2 25,0 2,8 6, /8" 2,7 8,2 24,0 7,4 9, /8" 2,7 2,8 24,0 7,4 9, /8" 2,7 22,0 24,0 20,6 9, /8" 2,7 24,5 26,0 2,8 9, /8" 2,7 25,8 28,0 28,6 9, /2" 5,9 2,4 28,5 2,8 2, /2" 5,9 24,9 28,5 2,8 2, /2" 5,9 25,4,0 28,6 2, /2" 5,9 27,0 2,0 28,6 2, /2" 5,9 28,0 2,0 28,6 2, /4" 9,0 29,0 4,5 28,6 7, /4" 9,,0 7,5,8 7,5 Product K S number O/ NPTF thread /8" 9,5 6,5 7,4 2,7 4, /8" 9,5 6,5 8,2 4, 4, /8" 9,5 20,0 20,0 5,9 4, /4" 4, 7,2 24,6 5,9 6, /4" 4, 7,2 24,6 25,9 6, /4" 4, 20,6 24,6 5,9 6, /4" 4, 22,0 27,0 20,6 6, /4" 4, 2,0 28,6 24,5 6, /8" 4, 2,5 27,0 20,6 9, /8" 4, 24,5 28,6 24,5 9, /2" 9, 26,0 5,0 28,6 2, /2" 9, 27,0 5,0 28,6 2,7 N/L

14 Stem Tee Connector Female O/ to O/ stem 90 Stem Tee Connector Female O/ to O/ stem 90 Product K S number O/ O/ stem ,5 29,5 4, ,8 0,6 4, ,5 4,9 7, ,0 4, 2, ,5 4,5 2, ,5 55,0 5, ,0 60,0 5, ,0 75,0 45,0 2 Product K S number O/ O/ stem ,5 2, ,6 4, ,9 7, , 2, ,5 2,2 9 Side Stem Tee Connector Female O/ to O/ stem Tee Connector Female O/ Product K S number O/ O/ stem ,5 2, ,6 4, ,9 7, , 2, ,5 2,0 9 Product K S number O/ O/ stem ,5 2,5 0, 2, ,5 5,5 2,7, ,0 6,0 4, 4, ,0 20,0 6,0 6, ,0 2,0 20,0 7, ,0 25,0 24,0 9, ,0 28,0 28,6 2, ,0 28,0 28,6, ,0 2,0,0 7, ,0 9,0 6,5 9, ,0 45,0 47,6 25,0 N/L

15 racketed Tee Connector Female O/ Male Tee daptor Female O/ to male taper SP thread Ø Q R Product K Q R S number O/ ,2,5 0, 5,20 x,9 5,5, , 6,0 4, 6,75 x 5,9 8,7 4, ,6 6,5 4, 6,75 x 5,9 8,7 4, ,4 20,5 7,5 6,75 x 9,0 9,5 6, ,5 2,0 2,8 6,75 x 25,4, 8, ,0 24,5 2,8 6,75 x 25,4, 9,6 Product K S number O/ thread SP /8" 9,5 6,5 7,0 2,7, /8" 9,5 6,5 8,0 4,, /4", 2,0 20,0 5,9 6, /4", 22,0 2,0 9,0 6, /8" 2,7 24,5 26,0 2,8 9,5 Male Side Tee daptor Female O/ to male taper SP thread Y Connector Female O/ Product 2 K S number O/ thread SP /8" 9,5 5,5 7,0 5,5 2,7, /8" 9,5 6,0 8,5 6,0 4, 4, /4", 20,0 22,0 20,0 5,9 6, /4", 2,0 2,0 2,0 9,0 6, /8" 2,7 25,0 27,0 25,0 2,8 9,6 Product K S number O/ ,0 4, 2, ,0 6 2,7, ,0 7 4, 4, ,5 20 7,5 6, ,5 22 2,8 7, ,0 24 2,8 9, ,0 29,8, ,0 7 5,7 9, , ,5 25,0 N/L

16 Four Way Connector Female O/ Connector lock U U U Ø Q R R 2 Product K S number O/ ,0 4, 2, ,5 4,, ,0 4, 4, ,0 7,5 6, ,0 24,0 7, ,0 24,0 9, ,0 0,0, ,0 5,0 9, ,0 44,0 25,0 Product No.* 2 Q R R U number of O/ outlets ,5 6,0 5, ,5 6,5 5, ,5 8,0 6, ,0 8,0 6, ,0 0,5 8, ,0,5 8, 2-2 *Other number of outlets available to special order Single Sided Manifold ouble Sided Manifold U U U R2 2 U U R2 Ø Q 2 R R Ø Q R R Product Inlet Outlet No. 2 Q R R R2 U number of O/ O/ outlets , , , , , , Manifolds up to 2 outlets can be provided subject to minimum economic production quantity. Product Inlet Outlet No. 2 Q R R R2 U number of O/ O/ outlets , , , , ,5 8, ,5 8, Manifolds up to 2 outlets can be provided subject to minimum economic production quantity. N/L

17 Hobbs Couplings The design of a Hobbs coupling allows the fittings to be screwed into a parallel SP tapping and accurately located for position in both height and direction before it is secured with the special coned locknut and polyurethane seal. Wring locknut down metal to metal to create an effective seal. Hobbs lbow daptor Female O/ to male parallel SP thread Hobbs Straight Connector Male parallel SP thread both ends. ØM K Product M S number thread thread /F SP SP /8" /8" 27,0 4,0 4,0 5, /4" /4" 5,5 9 7,5 7,5 8 7, /8" /8" 40, ,0 20,0 22 0, /2" /2" 48,0 27 2,0 2,0 26, /4" /4" 52,5 6 25,4 25,4 2 9, " " 64,0 4,8,8 9 25, /4" /8",5 7 7,5 7,5 4 5, /8" /4" 9,0 9 20,0 20,0 8 7, /2" /8" 44,0 24 2,0 2,0 22 0, /4" /2" 5, ,4 25,4 26, " /4" 6,0 6,8,8 2 9,0 Product K S number O/ thread SP /8" 4,0 4,9 22,0, 4, /8" 4,0 6,5 22,0 4, 4, /8" 4,0 6,5 22,0 4, 4, /8" 4,0 9,4 2,8 5,8 4, /4" 7,5 5,7 25,4 4, 6, /4" 7,5 7,2 25,4 4, 6, /4" 7,5 7,2 25,4 4, 6, /4" 7,5 20,6 27,0 5,8 6, /4" 7,5 2,7 0, 2,8 6, /4" 7,5 22,2 0, 2,8 6, /8" 20,0 8,2 0,2 7,4 9, /8" 20,0 2,8 0,2 7,4 9, /8" 20,0 2,,0 20,0 9, /8" 20,0 24,5,0 2,8 9, /8" 20,0 25,8 5,0 28,6 9, /2" 2,0 2,4 6,5 2,8 2, /2" 2,0 24,9 6,5 2,8 2, /2" 2,0 25,4 6,5 2,8 2, /2" 2,0 28,0 8,0 28,6 2, /2" 2,0 2,9 42,0 6,5 2, /4" 25,4 29,8 4,7,8 7, /4" 25,4 6,5 45,2 6,5 7, /4" 25,4 40,8 49,0 44,5 7, " 2,0 8,5 50,8 6,5 24, " 2,0 45,0 56,5 44,5 24,0 Hobbs Coned Locknut Female parallel SP thread Hobbs Seal Product number thread /F Product number thread /F SP SP /8" 7,0 7 /4" 8, /8" 2 2,7 /4" 2,5 5, /8" 9, /8" 2,5 20, /2" 0,9 27 /4" 0, /2" 2,6 24, /4" 2,6 0, ", ",2 7,2 N/L

18 Hobbs Tee daptor Female O/ to male parallel SP thread Product K S number O/ thread SP /8" 4,0 4,9 22,0 4, 4, /8" 4,0 6,5 22,0 4, 4, /8" 4,0 6,5 22,0 4,5 4, /8" 4,0 9,4 2,8 5,8 4, /4" 7,5 5,7 25,4 4, 6, /4" 7,5 7,2 25,4 4, 6, /4" 7,5 7,2 25,4 4, 6, /4" 7,5 20,6 27,0 5,8 6, /4" 7,5 2,7 0, 2,8 6, /4" 7,5 22,2 0, 2,8 6, /8" 20,0 9,0 0,2 7,4 9, /8" 20,0 2,8 0,2 7,4 9, /8" 20,0 2,,0 2,8 9, /8" 20,0 24,5,0 2,8 9, /8" 20,0 25,8 5,0 28,5 9, /2" 2,0 2,4 6,5 2,8 2, /2" 2,0 24,9 6,5 2,8 2, /2" 2,0 25,4 6,5 2,8 2, /2" 2,0 28,0 8,0 28,5 2, /2" 2,0 2,9 44,0 6,5 2, /4" 25,4 29,8 4,7,8 7, /4" 25,4 6,5 45,2 6,5 7, /4" 25,4 40,8 50,0 44,5 7, " 2,0 8,5 5, 6,5 24, " 2,0 45,0 56,5 44,5 24,0 N/L

19 Tubing Nut O -Ring Seal H Universal Tubing Sleeve Suitable for nylon metallic tubing Ø Product H number thread O/ /F M8 x,0 4 9,5 8 8, M0 x,0 5 0,0 0 7, M x,0 6 0,5 8, M x,0 8 2, 9, M5 x,0 0, 7 9, M8 x,5 2 5,7 9 0, M22 x,5 5 7,0 22 0, M24 x,5 6 7, 24, M26 x,5 8 9,5 27 2, M0 x,5 22 2,5 0 5, M8 x, ,5 4 8,0 K Ø Ø Product K number for SP thread /8" 2, 6, /4" 2, 20, /8" 2, 2, /2" 2,5 28, /8" 2,5, /4" 2,5 4,9 The O -ring seals shown on this page are suitable for use with our metric range of parallel threaded adaptors. For thread details refer to page Folded Copper Washer Ø Product Suitable for K number SP or metric or imperial thread thread thread ,8 /8" - /8" x 24TPI,5, ,2 /4" - -,5 7, ,7 /8" M6 -, ,0 /2" - -,5 26, ,0 5 /8" - -,8 28, ,5 /4" - -,8 2, ,2 7 /8" M0 -,8 6, , " M -,8 8, ,0 /4" - - 2,2 49, , - 7 /6" x 24TPI,5 4, ,7 - /2" x 24TPI,5 7, , M4 9 /6" x 24TPI,5 8, , - /4" x 24TPI,5 24, , M8 -, , M0 -, , M2 -,5 7 Product K number O/ ,2 6, ,2 7, ,5 8, , 0, ,0, ,7 5, , 9, ,0 20, , 2, ,5 26, ,2,0 Sealing Washers for use with banjo fitting Tubing Sleeve Suitable for metallic tubing only Nylon Product Size Material number M5 Nylon /8" Copper /4" Copper /8" Copper /2" Copper Ø Product K number O/ ,6 5, ,0 6, ,5 8, , 0, ,5 2, ,5 4, ,0 8, Copper N/L

20 lbow anjo ssembly Non Regulating SPP olt Female O/ to male parallel SP thread lbow anjo ssembly Regulating SPP olt Female O/ to male parallel SP thread Ø S S F F Product * F S number O/ thread /F /F SPP K 4 /8" ,5 2, K 5 /8" ,5, K 6 /8" ,5 4, K 8 /8" ,5 6, K 6 /4" 8 7 7,5 4, K 8 /4" ,5 6, K 0 /4" ,5 7, K 8 /8" ,0 6, K 0 /8" ,0 7, K 2 /8" ,0 9, K 0 /2" ,0 7, K 2 /2" ,0 9,6 Product * F S number O/ thread /F /F SPP K 5 /8" ,5, K 8 /8" ,5 6, K 8 /4" 42 6,5 7 7,5 6,0 *This dimension will vary with torque applied and is for guidance only. rrow on bolt hexagon indicates free flow direction. *This dimension will vary with torque applied and is for guidance only. Tee anjo ssembly Non Regulating SPP olt Female O/ to male parallel SP thread lbow anjo ody O/ Ø S F Product * F S number O/ thread /F /F SPP K 5 /8" ,5, K 6 /8" ,5 4, K 6 /4" ,5 4, K 8 /4" ,5 6, K 0 /4" ,5 7, K 8 /8" ,0 6,0 *This dimension will vary with torque applied and is for guidance only. Product C * F S number O/ for SP bolt K 4 /8" 4,0 2,5 8 2, K 5 /8" 4,0 5,0 0, K 6 /8" 4,0 5 4,0 4, K 8 /8" 6,0 9 6,0 6, K 6 /4" 6,0 8 4,0 4, K 8 /4" 6,0 42 6,0 6, K 0 /4" 8,5 44 8,5 7 7, K 8 /8" 20,5 48 7,0 6, K 0 /8" 20,5 49 8,5 7 7, K 2 /8" 2,5 50 2,5 9 9, K 0 /2" 22,0 54 8,5 7 7, K 2 /2" 22,0 56 2,5 9 9,6 *This dimension will vary with torque applied and is for guidance only. To double stack these bodies order longer bolts K or K, see below. N/L

21 Tee anjo ody O/ anjo olts Regulating Regulating Out Male parallel SP thread C F S Ø Product number thread /F SP K /8" K /4" K /8" K /2" Product C * F S number O/ for SP bolt K 5 /8" 4,0 5,0 0, K 6 /8" 4,0 54 4,0 4, K 6 /4" 6,0 56 4,0 4, K 8 /4" 6,0 64 6,0 6, K 0 /4" 8,5 68 8,5 7 7, K 8 /8" 20,5 70 7,0 6,0 * This dimension will vary with torque applied and is for guidance only. To double stack this body order longer bolt K, see below. Regulating In Male parallel SP thread Product number thread /F SP K /8" K /4" K /8" K /2" i-irectional Flow Male parallel SP thread Product number thread /F SP K /8" K /4" K /8" K /2" ll banjo bolts supplied complete with sealing washers. rrow on bolt hexagon indicates free flow direction. anjo olts - Non Regulating Single stacking Male parallel SP thread ouble stacking Male parallel SP thread Product S number thread /F SP K /8" , K /4" 7 5, K /8" , K /2" ,5 ll banjo bolts supplied complete with sealing washers. Product S number thread /F SP K /8" 44,0 4 4, K /4" 50,0 7 5, K /8" 62,5 22 9, K /2" 74,0 27 0, K* /8" 47,5 4 4, K* /4" 55,0 7 5,5 *To be used only with bodies marked, see tables above. Warning These products are intended for use in industrial compressed air systems only. o not use these products where pressures and temperatures can exceed those listed under Technical ata. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult Norgren. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products where applicable. N/L