Lincoln installation components, accessories and lubrication fittings

Transcription

1 Lincoln installation components, accessories and lubrication fittings

2 People, capabilities and systems to save money and increase productivity Industry leader Continually satisfying our customers with the world s best lubrication equipment and pumping systems has made Lincoln the largest and most successful company in our field. For nearly a century, companies have relied on our technical and quality leadership; our world-class manufacturing and customer service, and our vast network of distributors and support facilities. Research and development In order to provide the best worldwide and regional application solutions, Lincoln develops new products and systems at research and development facilities in the United States, Germany and India. Providing solutions Industrial customers in large processing plants, automotive manufacturing, pulp and paper mills, food and beverage and other manufacturing facilities can depend on solutions from Lincoln. For the toughest mobile applications, on the road or in the field, Lincoln protects heavy equipment used in mining, construction, agriculture and over-the-road trucking. In addition, Lincoln offers the best lubrication equipment to meet the needs of automotive service professionals. Complete product line Lincoln supplies automatic lubrication systems, pumps and pump stations and top quality lubrication equipment and accessories. Our quality systems in the United States and Germany are ISO 9001 registered and our fittings business is QS 9000 registered. Worldwide support With five technical support centers on three continents, and a network of distributors supported by regional sales and service offices, our customers can always draw on our worldwide resources.

3 Lubrication Fittings & ccessories/installation Components Table of Contents Lubrication Fittings & ccessories: Introduction Threaded Fittings Spin-Drive Fittings Drive-Type Fittings Flush-Type Fittings Stainless Steel Fittings Special Purpose Fittings Elbows and Plugs Design Tips Remote Lube Fitting Systems Carton Quantities Installation Components: Tubing Clamps and Screws Heavy-Duty Tube Fittings Standard-Duty Tube Fittings Threaded Sleeve Tube Fittings Snap-On Coupler Tube Fittings Tubing dapters Supply Line and Material Hose Feed Line Hose ulk Feed Line Hose and Fittings Heavy-Duty ir Line Quick Disconnects Pipe Fittings ccessories ircare ir Preparation Systems Decimal Equivalents Numerical Index

4 Lubrication Fittings & ccessories Introduction Lincoln lubrication fitting can be used for all of your lubrication needs. Our fittings are used in the automobile, agricultural, marine, truck, construction equipment and machine manufacturing industries. Lincoln offers a full line of lubrication fittings to meet the manufacturing requirements of today s industries. Our line consists of common threaded, thread-forming, drive-type, stainless steel, pressure relief, standard button head and vent fittings. Common Threaded Fitting Thread Forming Fitting Drive- Type Fitting Stainless Steel Fitting Relief Fitting Standard utton Head Fitting Vent Fitting The ball check in the head of the fitting prevents dirt and grit from getting into the bearing. The fittings can be wiped clean without forcing foreign material into the fitting and the bearing. The true spherical contour of the fitting head provides a natural ball and socket joint between the fitting head and any commercial hydraulic coupler for a wide-angularity of contact, and a tight metal-to-metal seal. The internal spring on the fittings is tempered with music wire, coiled so that it cannot be compressed to restrict the flow of heavy lubricants, or forced out of the body under normal pressures. The fittings have a specially formed lip at the fitting base that locks the spring and ball securely in place. 2

5 Lubrication Fittings & ccessories Introduction Remote Lube Fitting Systems: To easily reach hidden, inaccessible or hazardous bearings Hard-to-reach lubrication fittings present a major maintenance problem for the proper care of all types of machinery. Hidden or guarded lubrication fittings can lead to production downtime, higher operating and maintenance costs and the risk of personal injury to operators and employees all directly traceable to poor lubrication fitting access. How do you eliminate these problems? Lincoln s Remote Lube Fitting Systems enefits Easy access to lubrication fittings Easier, quicker and safer lubrication ssures that all bearings are lubricated earings can be safely lubricated while machine is operating Reaches hidden, inaccessible or hazardous bearings Junction locks 3

6 Lubrication Fittings & ccessories Threaded Fittings On the straight and angle fittings, the ball check end or the greasing end is heat treated. The spin-drive and drive-type angle fittings are entirely heat treated. ll fittings are zinc plated and have a supplemental coating. ¼" - 28 Thread (Straight & Taper) This type of thread is used mostly on cars and light trucks. The SE-LT is a thread that conforms to the Society of utomotive Engineers lubrication fittings thread specification * ¼" -28 Taper Thd. (SE-LT) 5527 ¼" -28 U.N.F. 2 Thd. /mm /mm C /mm D /mm E F /mm G /mm 5527 ¹⁷ ₃₂ / 14.0 ¹¹ ₆₄ / 4.4 ⁹ ₃₂ / / ¹⁷ ₃₂ / 13.5 ³ ₁₆ / 4.8 ⁵ ₁₆ / / 6.6 * ³⁵ ₆₄ / 13.9 ⁷ ₃₂ / 5.6 ⁵ ₁₆ / / ¼" -28 Taper Thd. (SE-LT) 5014 ¼" -28 Taper Thd. (SE-LT) 5013 ¹¹ ₁₆ / 17.5 ²³ ₆₄ / 9.1 ⁵ ₁₆ / / ¹⁵ ₁₆ / 23.8 ³⁹ ₆₄ / 15.5 ⁵ ₁₆ / / ¹³ ₁₆ / 20.6 ¹³ ₆₄ / 5.1 ⅜ / / ³⁷ ₆₄ / 14.7 ²⁷ ₆₄ / ¾ / 19.1 ³ ₁₆ / 4.8 ⅜ / / ²¹ ₃₂ / 16.7 ¹⁵ ₃₂ / ²⁵ ₃₂ / 19.8 ¹⁹ ₆₄ / 7.5 ⅜ / / ²¹ ₃₂ / 16.7 ¹⁵ ₃₂ / ¼" -28 Taper Thd. (SE-LT) 5410 ¼" -28 Taper Thd. (SE-LT) * Not illustrated. Same as 5010 but without all Check ¼" -28 Taper Thd. (SE-LT) 4

7 Lubrication Fittings & ccessories Threaded Fittings ⅛" Pipe Thread The ⅛" pipe threaded fittings are constructed for additional strength. This type of fitting is popular for use in the construction and agricultural industry and large industrial machinery ⅛" P.T.F. Spec. Extra Short 5009 ⅛" P.T.F. Spec. Short 5003 ⅛" P.T.F. Spec. Short 5505 ⅛" N.P.T.F. /mm /mm C /mm D /mm E F /mm G /mm 5000 ²¹ ₃₂ / 16.7 ¹⁹ ₆₄ / 7.5 ⁷ ₁₆ / / ¼ / 31.8 ²⁵ ₃₂ / 19.8 ⁷ ₁₆ / / ⅝ / ⁵ ₃₂ / 54.8 ⁷ ₁₆ / / / 25.4 ⁵ ₁₆ / 7.9 ½ / / ⁵⁷ ₆₄ / 22.6 ¹⁹ ₆₄ / 7.5 ⁷ ₁₆ / / ⁴¹ ₆₄ / 16.3 ²⁷ ₆₄ / ⅞ / 22.2 ⁹ ₃₂ / 7.1 ⁷ ₁₆ / / ²³ ₃₂ / 18.3 ½ / ⁷ ₃₂ / 31.0 ⁹ ₁₆ / 14.3 ⁷ ₁₆ / / ²³ ₃₂ / 18.3 ½ / ²⁷ ₃₂ / 21.4 ⁹ ₃₂ / 7.1 ⁷ ₁₆ / / ⁴⁷ ₆₄ / 18.7 ½ / ⅛" P.T.F. Spec. Short 5300 ⅛" P.T.F. Spec. Short 5308 ⅛" P.T.F. Spec. Short 5400 ⅛" P.T.F. Spec. Short 5

8 Lubrication Fittings & ccessories Threaded Fittings ¼" Pipe Thread /mm /mm C /mm D /mm E /mm F /mm G /mm 5050 ⁵³ ₆₄ / 21.0 ⅜ / 9.5 ⁹ ₁₆ / / ¼" N.P.T ¹ ₃₂ / 26.2 ⅜ / 9.5 ⁹ ₁₆ / / ¹³ ₁₆ / 20.6 ⁷ ₃₂ / ¼" N.P.T.F. Spec. Extra Short Metric Fittings 6mm, 8mm, 10mm /mm /mm C mm D mm E F /mm G /mm mm x 1 * 5175 ³³ ₆₄ / 13.1 ¹³ ₆₄ / mm x 1 * 5176 ⅞ / 22.2 ⁷ ₃₂ / ³⁷ ₆₄ / 14.7 ²⁵ ₆₄ / 9.9 * 5177 ⁴⁵ ₆₄ / 17.9 ⁷ ₃₂ / ¾ / 19.1 ⁹ ₁₆ / 14.3 * 5178 ³⁷ ₆₄ / 14.7 ⁷ ₃₂ / mm x mm x 1 * 5179 ⅞ / 22.2 ⁷ ₃₂ / ³⁷ ₆₄ / 14.7 ²⁵ ₆₄ / 9.9 * 5180 ⁴⁵ ₆₄ / 17.9 ⁷ ₃₂ / ¾ / 19.1 ⁹ ₁₆ / ³⁹ ₆₄ / 15.5 ⁷ ₃₂ / mm x ¹⁵ ₁₆ / 23.8 ⁷ ₃₂ / ⁴¹ ₆₄ / 16.3 ²⁷ ₆₄ / mm x ⁴⁷ ₆₄ / 18.7 ⁷ ₃₂ / ⁴⁵ ₆₄ / 17.9 ½ / 12.7 * Not illustrated. 6

9 Lubrication Fittings & ccessories Spin-Drive Fittings Spin-Drive Spin-Drive (thread forming) fittings have special tapered drive threads for fast production line installation in untapped holes to save tapping cost. Spinning into the hole with a power wrench provides the most effective installation. Installation torque limits, to avoid stripping, should be established by test in the type of material in which production fittings are to be installed. Installation force causes a rearrangement of mating material to conform with the fitting thread contour creating a leak-tight permanent seal. Not recommended for heat treated parts. Fitting threads are heat treated to Rockwell on the 15N scale. For field servicing, Spin-Drive fittings may be replaced by any standard fitting having the same thread size or another Spin- Drive fitting. Spin-Drive Fittings ⅛" -28 Spec. Taper Drive Th d ⅛" Pipe-Special Taper Drive Th d. /mm /mm C /mm D /mm E F /mm G /mm ⁹ ₁₆ / 14.3 ³ ₁₆ / 4.8 ⁵ ₁₆ / / ⅝ / 15.9 ¹ ₄ / 6.4 ⁷ ₁₆ / / ⅛" Pipe-Special Taper Drive Th d ¼" -28 Spec. Taper Drive Th d ⁴⁵ ₆₄ / 17.9 ²¹ ₆₄ / 8.3 ⁷ ₁₆ / / ¹³ ₁₆ / 20.6 ¹³ ₆₄ / 5.1 ⅜ / / ³⁷ ₆₄ / 14.7 ⅜ / ²⁷ ₃₂ / 21.4 ¹³ ₆₄ / 5.2 ⁷ ₁₆ / / ²¹ ₃₂ / 16.7 ²⁷ ₆₄ / ³ ₄ / 19.1 ³ ₁₆ / 4.8 ⅜ / / ²¹ ₃₂ / 16.7 ¹⁵/₃₂ / ⁴⁹ ₆₄ / 19.3 ¹³ ₆₄ / 5.2 ⁷ ₁₆ / / ⁴⁷ ₆₄ / 18.7 ³³ ₆₄ / ⅛" Pipe-Special Taper Drive Th d ¼" -28 Spec. Taper Drive Th d ⅛" Pipe-Special Taper Drive Th d. 7

10 Lubrication Fittings & ccessories Drive-Type Fittings Drive-Type Fittings Drive-type fittings are designed for fast production line installation in untapped holes to save thread tapping costs.circumferential serrations on shank provide a hydraulic tight seal when fitting is installed properly. Cannot be used where high lubricant back pressures can be developed. Hole sizes and shank dimensions are for reference use only. To determine optimum hole size, test applications should be conducted using the type of material into which the fitting is to be installed steel, cast iron, brass, aluminum, etc. Production tolerances of hole size must be taken into consideration when test is conducted. Drive-Type Fittings /mm /mm C /mm D /mm E F /mm G /mm 5033 For ³ 16"/4.8 mm Dia. Hole 5036 For ⅜"/9.5mm Dia. Hole 5031 For 5 16"/7.9 mm Dia. Hole 5385 For ³ 16"/4.8mm Dia. Hole 5033 ³³ ₆₄ / 13.1 ¹⁵ ₆₄ / 6.0 ⁵ ₁₆ / / ³⁵ ₆₄ / 13.9 ¼ / 6.4 ³ ₈ / / ⅝ / 15.9 ¼ / 6.4 ⁷ ₁₆ / / ²³ ₃₂ / 18.3 ⁷ ₃₂ / 5.6 ³ ₈ / / ¹¹ ₁₆ / 17.5 ¹ ₂ / ⁴⁹ ₆₄ / 19.4 ⁹ ₃₂ / 7.1 ³ ₈ / / ¹¹ ₁₆ / 17.5 ¹ ₂ / ¹ ₂ / 12.7 ³ ₁₆ / 4.8 ⁵ ₁₆ / / For ¼"/6.4mm Dia. Hole For ³ 16"/4.8mm Dia. Hole For ¼"/6.4mm Dia. Hole Flush Type Fittings For use where installation of protruding fitting cannot be used. Can be used on shafts, pulleys, or other type of rotating bearing or parts. /mm /mm C /mm D / mm ⁹ ₃₂ / 7.1 ¹⁵ ₆₄ / 6.0 ⁵ ₁₆ / 7.9 Dia..256 / 6.5 8

11 Lubrication Fittings & ccessories Stainless Steel Fittings Stainless Steel Fittings Select Lincoln stainless steel fittings for marine applications, food processing machinery, sewage disposal systems or any use where protection against corrosive elements is a design criteria. Stainless steel ball checks and springs are securely housed in passivated austenitic type 303 stainless steel bodies for maximum usable life and performance. To avoid use of inferior substitutes specify Lincoln Stainless Steel fittings by part number on your drawings. Stainless Steel Fittings /mm /mm C /mm D /mm E F /mm G /mm ¼" -28 Taper Thd. (SE-LT) ⅛" P.T.F. Spec. Extra Short ¹⁷ ₃₂ / 13.5 ³ ₁₆ / 4.8 ⁵ ₁₆ / 7.9 Hex..260/ ⁴¹ ₆₄ / 16.3 ⁹ ₃₂ / 7.1 ⁷ ₁₆ / 11.1 Hex..400 / ³ ₄ / 19.1 ³ ₁₆ / 4.8 ³ ₈ / 9.5 Hex..260 / ²¹ ₃₂ / 16.7 ¹⁵ ₃₂ / ⁹ ₁₆ / 14.3 ¹ ₄ / 6.4 ⁵ ₁₆ / 7.9 Dia..196 / ¼" -28 Taper Thd. (SE-LT) For ³ 16"/4.8 mm Dia. Hole 9

12 Lubrication Fittings & ccessories Special Purpose Fittings ⅛" N.P.T.F. 7 /16" Hex 1.1 mm 33 /64" 13.1 mm 400" 10.2 mm 1" 25.4 mm Leakproof Fitting Leakproof fittings are special purpose fittings for use in those applications where a positive seal is essential. special steel ball check, brass insert seat and a surface ball check provide an effective seal. Designed for grease, medium and heavy oils, it withstands a back pressure up to 10,000 psi (690 bar) ⅛" P.T.F. Spec. Short Relief Valves Use wherever control of oil or grease pressure Relief is required. Releases pressure build up during to 5 psig /.07 to.34 bars equipment operation or when filling gear cases or bearing housings with pressure guns. Twin vent ½ to 15 psig /.52 to 1 bars ports provide visual indication of pressure relief to 25 psig / 1 to 1.7 bars Select valve with pressure range best suited to design application to 80 psig / 3.1 to 5.5 bars Operating parts are positioned internally for maximum protection against entry of dirt or valve damage. all check is located at base of valve body as close as possible to protected material. Not recommended to be used below the fluid level ⅛" P.T.F. Spec. Extra Short 5698 ⅛" P.T.F. Spec. Short Safety Vent Fitting Required for use in those applications where a build up of pressure in the bearing is undesirable or damaging. vent slot cut vertical to the threads provides an air escape during bearing fill and when grease appears serves as a bearing fill indicator. Vent slot restriction permits bearing fill without build up of prohibitive pressure. tmospheric Vent For use on differentials, transmissions and gear boxes. It allows air to escape and enter as the internal pressure increases or decreases. The cap prevents dirt from entering. Must be installed above the normal level of fluid ⅛" N.P.T.F ⅜" N.P.T.F ¼" N.P.T.F. utton Head Fittings Lincoln standard button head fittings ( 5 /8" diameter head) are designed for use where volume flow of lubricant is required, such as bearings on earth moving equipment, conveyors and mining machinery. Heat treated and zinc plated for long service life. /mm /mm C /mm D /mm 5701 ³ ₄ / 19.1 ²³ ₆₄ / 9.1 ⁵ ₈ / / ²⁷ ₃₂ / 21.4 ⁷ ₁₆ / 11.1 ⁵ ₈ / / ¹ ₁₆ / 27.0 ³⁷ ₆₄ / 14.7 ³ ₄ / /

13 Lubrication Fittings & ccessories Elbows & Plugs Street Elbows Style /mm /mm C /mm D /mm E F G /mm ¹³ ₁₆ / 20.6 ⁵ ₁₆ / 7.9 ¹ ₂ / 12.7 Sq. ¹ ₄-28 Taper 90 ¹ ₈ PTF Style 1 Style ¹ ₁₆ / 27 ¹⁷ ₃₂ / 13.5 ¹ ₂ / 12.7 Sq. ¹ ₄-28 Taper 45 ¹ ₈ PTF / 25.4 ¹⁵ ₃₂ / 11.9 ¹ ₂ / 12.7 Sq. ¹ ₈ PTF 45 ¹ ₈ PTF ¹³ ₁₆ / 20.6 ⁹ ₃₂ / 7.1 ¹ ₂ / 12.7 Sq. ¹ ₈ PTF 90 ¹ ₈ PTF / 25.4 ¹⁵ ₃₂ / 11.9 ¹ ₂ / 12.7 Sq. ¹ ₈ PTF 90 ¹ ₈ PTF / 25.4 ³ ₈ / 9.5 ¹ ₂ / 12.7 Sq. ¹ ₈ NPSM 90 ¹ ₈ NPTF ¹ ₄-28 UNF ¹ ₂ / 38.1 ⁷ ₈ / 22.2 ⁵ ₈ / 5.9 Sq. ¹ ₈ NPTF 90 ¹ ₈ NPTF dapters /mm /mm C /mm D E F ⁷ ₈ / 22.2 ⁵ ₁₆ / 7.9 ¹ ₂ / 12.7 Hex. ½" / 12.7 mm ¹ ₈ NPSF ¹⁵ ₁₆ / 23.8 ³ ₈ / 9.5 ⁹ ₁₆ / 14.3 Hex. ¹ ₈ NPTF ¹ ₈ NPTF ⁷ ₈ / 22.2 ³ ₈ / 9.5 ¹ ₂ / 12.7 Sq. ³ ₁₆" / 4.8 mm ¹ ₈ NPTF ¹ ₄-28 UNF ⁷ ₈ / 22.2 ⁷ ₁₆ / 11.1 ¹ ₂ / 12.7 Sq. ¼" / 6.4 mm ¹ ₈ NPTF ¹ ₄-28 UNF Plugs ⅛" P.T.F. Spec. Extra Short ¼"-28 Spec. Taper Drive Th d. 11

14 Lubrication Fittings & ccessories Design Tips Fitting Installation and Removal Tools Model For use to install straight drive-type fittings into untapped holes. Model For use to install angle drive-type fittings into untapped holes. Easy Out Tool Combination tool for removing worn or broken fittings and retapping holes for new fitting installation, two models available: Model G904 For tapping ¹ ₄" -28 threads and removal of both ³ ₈" and ⁵ ₁₆" Hex, straight or angle fittings. Model G905 For tapping ¹ ₈" NPT threads and removal of both ⁷ ₁₆" Hex, straight or angle fittings. Depth of Engagement When selecting a lubrication fitting, either straight, angle, standard thread, spin-drive or straight drive, be sure to measure engagement depth, taking manufacturing tolerance into consideration. Then select fitting with thread length or drive shank length that will not penetrate bearing material or rest against rotating member. Turning Radius The turning radius is given for all angle fittings shown in this manual. e sure that this is taken into consideration during initial machine design and then select a fitting with a turning radius that will permit easy production line installation. Deep Set Fittings Deep set fittings are sometimes necessary in machine design. When required, make sure sufficient clearance is provided for easy disengagement of hydraulic coupler. ngularity of Contact Lincoln hydraulic couplers and fittings are designed to provide a hydraulic seal at any coupler angle up to 15. Movement beyond this angle will cause coupler to disengage. 12

15 Lubrication Fittings & ccessories Design Tips Determination of Pipe Thread Sizes Nominal Pipe Thread Size Threads Per Inch Major Dia. or C / mm Nominal Engagement for tight Joint / mm ¹ ₈" / 10.3 ¹ ₄ / 6.4 ¹ ₄" / 13.7 ³ ₈ / 9.5 ³ ₈" / 17.1 ³ ₈ / 9.5 ¹ ₂" / 21.3 ¹ ₂ / 12.7 ³ ₄" / 26.7 ⁹ ₁₆ / " 11¹ ₂ / 33.4 ¹¹ ₁₆ / 17.5 Drill Size Selection Fitting Thread Size Tap Drill Selection for Standard Thread Fitting Drilling Size Selection for Spin-Drive Fittings ¹ ₄" -28 #3 (for soft metal, use #5) -.234"/ 5.9mm Dia. * ⁵ ₁₆" -32 ⁹ ₃₂"/7.1mm (for soft metal, use J ) - ¹ ₈" Pipe ¹¹ ₃₂"/8.7mm (for soft metal, use R ) ³ ₈ -.375"/ 9.5mm Dia. * ¹ ₄" Pipe ⁷ ₁₆" / 11.1mm - * Drill sizes given are nominal and may vary with different types of material. For maximum effectiveness, test applications should be conducted using the type of material into which the fitting is to be installed (steel, cast iron, brass, aluminum, etc.). Production tolerances of hole must be taken into consideration when conducting test. Lubrication Fitting Thread Symbols The identification symbols and their meaning which have been adopted for the various threads used in the manufacture of lubrication fittings are given below: Symbol NPT NPTF PTF PTF Special Short PTF Special Extra Short NPSF NPSI NPSM ¹ ₄" -28 Taper Thread (SE-LT) ¹ ₄" -28 Special Taper Drive Thread ¹ ₈" Pipe Special Taper Drive Thread Meaning merican Standard Taper Pipe Thread Dryseal merican Standard Taper Pipe Thread Same as NPTF except full thread length has been shortened by one thread on small end of thread also designated as PTF SE Short Same as PTF Short except one full thread has been shortened from large end of thread Same as PTF Short except two full threads have been shortened from large end of thread Dryseal merican Fuel Internal Straight Pipe Thread Dryseal merican Intermediate Internal Straight Pipe Thread merican Standard Straight Mechanical Pipe Thread Thread has a ³ ₄" taper per foot and a pitch diameter of.2257/.2224 at small end. The mating tapped hole is ¹ ₄" -28 UNF 3 straight thread. Tap drill must not exceed.215" diameter. Thread Forming-Forms thread in mating part during installation when removed can be replaced by standard ¹ ₄" -28 taper thread (SE-LT) fitting. Thread Forming-Forms thread in mating part during installation when removed can be replaced by standard ¹ ₈" -27 PTF series fitting. Symbol Designation Symbol Designation N merican Standard S Straight P Pipe M Mechanical T Taper I Intermediate F Fuel LT Lubrication Thread 13

16 Lubrication Fittings & ccessories Remote Lube Fitting Systems Hard-to-reach lubrication fittings present a major maintenance problem for the proper care of all types of machinery. Hidden or guarded lubrication fittings can mean production downtime, higher operating and maintenance costs and risk of personal injury to operators and employees all directly traceable to poor lubrication fitting access. How do you eliminate these problems? Lincoln s Remote Lube Fitting Systems benefit you by providing easy access to lubrication fittings; lubrication is easier, quicker and safer; assures all bearings will be lubricated and can be safely lubricated while machine is operating; and finally, it s possible to reach hidden, inaccessible or hazardous bearings. Junction locks Junction block surface mount systems are used to bring multiple lubrication points to a common, easily accessible location. The junction blocks provide a means for coupling lubricant feed lines to bearings with lubrication fittings. They are available in three basic design groups and may be mounted in multiple units to meet all application requirements. Group I Have ¹¹ ₃₂" diameter mounting holes at 90 intervals, for use with ⁵ ₁₆" diameter mounting bolts. This permits horizontal or vertical positioning of lubricant inlet passages of Inlets /mm /mm C /mm D /mm E /mm ³ ₄ / 69.9 ⁷ ₈ / / 25.4 ³ ₄ / 19.1 ³ ₄ / ³ ₄ / ⁷ ₈ / / ³ ₄ / 19.1 ³ ₄ / 19.1 Group II Have ⁹ ₃₂" diameter mounting holes for use with ¹ ₄" diameter mounting bolts. Mounting holes are perpendicular to inlet passages permitting vertical positioning only. Style 2 Group II without Fitting Style of Inlets /mm /mm C /mm D /mm E /mm ¹ ₄ / 31.8 ³ ₈ / 9.5 ³ ₄ / 19.1 ³ ₄ / ³ ₄ / 44.5 ⁷ ₈ / 22.2 ³ ₄ / 19.1 ³ ₄ / ³ ₄ / 69.9 ⁷ ₈ / / 25.4 ³ ₄ / 19.1 ³ ₄ / ³ ₄ / 95.3 ⁷ ₈ / / 50.8 ³ ₄ / 19.1 ³ ₄ / ³ ₄ / ⁷ ₈ / / 76.2 ³ ₄ / 19.1 ³ ₄ / ³ ₄ / ⁷ ₈ / / ³ ₄ / 19.1 ³ ₄ /

17 Lubrication Fittings & ccessories Remote Lube Fitting Systems Mounting olts and Nuts /mm /mm C /mm ¹ ₄"-20 1¹ ₂ / 38.1 ³ ₄ / 19.1 /mm /mm C /mm ¹ ₄"-20 ⁷ ₃₂ / 5.6 ⁷ ₁₆ / ⁵ ₁₆"-18 ¹⁷ ₆₄ / 6.7 ¹ ₂ / 12.7 ccessories Supply and Feed Line Hose lvania #2 Grade Grease Filled Coils ft. / 7.9 M Minimum urst 10,000 psig 690 bar Max. Working 4,000 psig 276 bar Minimum ending 3¹ ₂ " 88.9 mm Hose Construction Nylon Tube, Dacron raid, Polyurethane Cvr ft. / 10.7 M ft. / 12.2 M Note: Use with hose ends or Temperature range: -40 F to 212 F. Feed Line Nylon Tubing Description O.D. Wall Thickness Working Minimum ending Radius ft. / 7.6 M coil grease* filled ft. / 15.2 M coil grease* filled ft./30.5 M coil non-grease filled ft. / 7.6 M coil grease* filled ¹ ₄" 6.4 mm.050" 1.3 mm 625 psig 42.5 bar 625 psig 42.5 bar.875 / ft. / 15.2 M coil grease* filled ft./30.5 M coil non-grease filled.062" 1.6 mm 500 psig 34.5 bar 0.5 / ft./152.4 M coil non-grease filled Steel Tubing Description ¹ ₈" OD x.020" wall 25' coil 3.2mm OD x.5mm wall 7.6m coil ¹ ₄" OD x.028" wall 25' coil 6.4 mm OD x.7mm wall 7.6m coil Max. Working 4400 psig 300 bar 2800 psig 190 bar Installation Tools Plastic Tube & Hose Cutter Replacement lade

18 Lubrication Fittings & ccessories Remote Lube Fitting Systems Hose Ends for ⅛" I.D. Hose Description ¹ ₈" NPT swedge on hose stud (Requires swedging tool) ¹ ₈" NPT field installable hose coupling (swedging tool not required) Installation Tools Hose Swedging Tool Hose Ends for Use with Quicklinc Fittings Description Hose stud, 90 (to be used with ) Hose stud, straight (to be used with ) Threaded sleeve Stainless steel hose stud sleeve Stainless steel straight hose Hose End Connecting Tools Description Hand vise for quick connect and reusable hose ends ulkhead Connectors Style C D ¹ ₈" PTF ¹ ₂" / 12.7 mm ¹ ₄" -28 ³ ₁₆" / 4.8 mm ¹ ₈" PTF ¹ ₂" / 12.7 mm ¹ ₄" -28 ¼" / 6.4 mm ¹ ₈" PTF ¹ ₂" / 12.7 mm ¹ ₄" -28 ³ ₁₆" / 4.8 mm Lock Nut ¹ ₈" N.P.S.M. thread Style 1 Style 2 dapter Union Style 1 Style 2 Style 3 Reducing ushings Swivels C D ¹ ₄" -28 THD ¹ ₈" NPT ⁷ ₈" / 22.2mm ½" / 12.7 mm ³ ₈" NPT ¹ ₈" NPT ³ ₄" / 19.1mm ¹¹ ₁₆" / 17.5mm Hex ³ ₈" NPT ¹ ₄" NPT ³ ₄" / 19.1mm ³ ₄" / 19.1mm Hex Style C ¹ ₈" NPT 1¹ ₄" / 31.8mm ¹ ₈" NPT ¹ ₈" NPT 1¹ ₄" / 31.8mm ¹ ₈" NPT ¹ ₈" NPT 1³ ₈" / 34.9mm Note: Not suitable for installations requiring continuous rotation. 16

19 Lubrication Fittings & ccessories Remote Lube Fitting Systems Tube Connectors Style 1 Style 2 Style Type ¹ ₄" ¹ ₈" NPT STGT ¹ ₄" ¹ ₈" NPT ¹ ₈" ¹ ₈" NPT ¹ ₈" ¹ ₈" NPT STGT ¹ ₈" ¹ ₄"-28 thd. STGT ¹ ₈" ¹ ₄"-28 thd. 90 Compression Nut for use with Style 2 Tube Connectors and Swivel. For ¹ ₈" O.D. Tubing. Thread size is ⁵ ₁₆"-24. Sleeve for use with Style 1 Tube Connectors. For ¹ ₄" O.D. Tubing. Nut for use with Style 1 Tube Connectors. For ¹ ₄" O.D. Tubing. Zerk-Lock Grease Fitting dapter Connects any ⅛" NPTF male tube adapter directly to a standard grease fitting.luminum, carbon steel construction; fluorocarbons elastomer seal. Useful for connecting to drivetype fittings or metric fittings. Once installed, the Zerk-Lock cannot be removed from the fitting. Threads / mm /mm /mm C /mm ¹ ₈" NPSL Female.625 / / / 12.7 Installation ccessories Staking Tool 17

20 Lubrication Fittings & ccessories Remote Lube Fitting Systems Quicklinc Fittings Use for connections to ¼" nylon tubing only. Can be used with Zerk-Lock adapter or be screwed directly into bearing. Description ¹ ₄" tube x ¹ ₈" NPT male 90 swivel fitting ¹ ₄" tube x ¹ ₈" NPT male straight fitting ¹ ₄" tube x ¹ ₈" NPT male 90 fitting ¹ ₄" tube x ¹ ₄" -28 male 90 swivel fitting ¹ ₄" tube x ¹ ₄" -28 male 90 fitting ¹ ₄" tube x ¹ ₄" -28 male straight fitting ¹ ₄" tube x ¹ ₄" tube splicer union Divider Valve Outlet & Inlet dapters for ⅛" I.D.Hose Quicklinc Push-In Style with Check Description Valve outlet fitting with check - 10mm ¼" tube x ⅛" NPT male straight fitting IMPORTNT: Use the valve adapters for connecting the ⅛" high pressure hose (incl. hose stud with groove) to the main divider valve. The collet of the adapter is not knurled and has a wide collar. Description Protective Quicklinc rubber boot Standard Compression Fittings Description ¹ ₄" tube x ¹ ₈" NPT male straight fitting ¹ ₄" tube x ¹ ₈" NPT male 90 fitting Snap-On Connector Fittings Description snap-on connector for ¹ ₄" O.D. tubing Straight snap-on connector for ¹ ₄" O.D. tubing Compression nut for and Straight snap-on connector for ¹ ₈" O.D. tubing snap-on connector for ¹ ₈" O.D. tubing Compression nut Tube Clamps for ¼" O.D. Tubing C of Tubes ¹ ₄" / 6.4 ¹ ₂" / ¹⁵ ₁₆" / 23.8 mm ¹ ₂" / 12.7 ³ ₈" / ³ ₁₆" / 30.2 mm ³ ₄" / 19.1 ³ ₈" / ⁷ ₁₆" / 36.5 mm 1" / 25.4 ³ ₈" / ¹¹ ₁₆" / 42.9 mm 1¹ ₄" / 31.8 ³ ₈" /

21 Lubrication Fittings & ccessories Remote Lube Fitting Systems Tube Clamps for ⅛" O.D. Tubing C of Tubes ¹ ₈" / 3.2 ¹ ₂" / ¹¹ ₁₆" / 17.5 mm ¹ ₄" / 6.4 ³ ₈" / ¹³ ₁₆" / 20.6 mm ³ ₈" / 9.5 ³ ₈" / ¹⁵ ₁₆" / 23.8 mm ¹ ₂" / 12.7 ³ ₈" / ¹ ₁₆" / 27.0 mm ⁵ ₈" / 15.9 ³ ₈" / Insulated J Type Clamps Clip Screw Nylon Ties Spiral Wrap ⁷ ₁₆" / 11.1 mm opening ¹³ ₃₂" / 10.3 dia. hole ⁷ ₁₆" / 11.1 mm opening ¹⁷ ₃₂" / 13.5 dia. hole ¹¹ ₁₆" / 17.5 mm opening ⁷ ₁₆" / 11.1 dia. hole ulk Supply and Feed Line Hose and Tubing Description Feed line bundling spiral wrap (10 ft. / 3 m length) Feed line bundling spiral wrap (20 feet/6m of spiral wrap) Nylon ties (100 count poly bag) 7" / m length Nylon ties (50 count poly bag) 7" / m length Nylon ties (25 count poly bag) 7" / m length Plastic grease fitting cap feet/6m of ³ ₈" convoluted loom/split wrap feet/6m of ¹ ₂" convoluted loom/split wrap feet/6m of ⁵₈" convoluted loom/split wrap #6 Thd - 1/4" Long for use in mounting and series tube clamps. Plastic Cap Convoluted Loom/Split Wrap 19

22 Lubrication Fittings & ccessories Carton Quantities Our popular fitting models are packaged in a convenient 100 piece carton for your small order requirements. Order a quantity of one and receive 100 pieces of that fitting. ⅛" NPT 100 Pc. ox ulk Description Length 5000C 5000 Straight ²¹ ₃₂" 5003C 5003 Straight 1¼" 5200C angle ⅞" 5300C angle ²⁹ ₃₂" 5400C angle ²⁷ ₃₂" ¼" NPT 100 Pc. ox ulk Description Length 5350C angle ¹ ₄" NPT 1⁵ ₃₂" ¼"-28 SE 100 Pc. ox ulk Description Length 5010C 5010 Straight short thread ¹ ₂" 5013C 5013 Straight long thread ¹¹ ₁₆" 5527C 5527 Straight short thread ³¹ ₆₄" 5210C angle short thread ⁷ ₈" 5410C angle short thread ²⁵ ₃₂" Metric 100 Pc. ox ulk Description Length 5175C 5175 Straight 6mm 5176C mm 5177C mm 5178C 5178 Straight 8mm 5179C mm 5180C mm 5181C 5181 Straight 10mm 5182C mm 5183C mm utton Head 100 Pc. ox ulk Description Length 5701C 5701 ¹ ₈" NPT(m) thread ²⁵ ₃₂" 5706C 5706 ¹ ₄" NPT(m) thread ⁵³ ₆₄" Drive-Type Pc. ox ulk Description Length Drive Dia. 5033C 5033 Straight ⁹ ₁₆" ³ ₁₆" 5385C angle ¹³ ₁₆" ³ ₁₆" 5031C 5031 Straight ³⁷ ₆₄" ⁵ ₁₆" 20

23 Lubrication Fittings & ccessories Carton Quantities Our standard bulk fittings are boxed in easy to handle cartons weighing approximately 30 pounds. The cartons are approximately 9"x9"x5". Order your fittings in these standard carton quantity increments to reduce your handling time. Standard ox Quantity Standard ox Quantity

24 Tubing Steel Tubing For supply and feedlines. O.D. Size (O.D. x Wall) Wall Length ft. / m Working Type ¹ ₈ / psig / 300 bar Coil ¹ ₄ / psig / 190 bar coil ³ ₈ / psig / 126 bar coil Type 304 Stainless Steel Tubing For supply and feedlines. For corrosive environments. STM -269 specs. O.D. Size (O.D. x Wall) Wall Length ft. / m Working Type ¹ ₈ / psig / 612 bar coil ¹ ₄ / psig / 305 bar coil ³ ₈ / psig / 203 bar coil Nylon Tubing For feedlines. Temperature range -65 F to 150 F O.D. Size (O.D. x Wall) Wall Length ft. / m 25/ ¹ ₈ / / ¹ ₄ / / 152 Working 625 psig / 42.5 bar Minimum end Radius

25 Clamps and Screws Single and Multiple Tube Clamps For feedlines. Clamp Const. Tubes 1 Tube Size ¹ ₈ OD ¹³ ₁₆ ³ ₈ ³ ₈ ¹ ₁₆ ⁵ ₈ ³ ₈ Steel ¹ ₄ ¹ ₂ C ¹ ₈ ¹ ₂ ¹¹ ₁₆ ¹ ₄ ³ ₈ ¹⁵ ₁₆ ¹ ₂ ³ ₈ ¹⁵ ₁₆ ¹ ₂ ³ ₈ ¹ ₄ OD 1³ ₁₆ ³ ₄ ³ ₈ ⁷ ₁₆ 1 ³ ₈ ¹¹ ₁₆ 1¹ ₄ ³ ₈ ¹ ₈ ³ ₈ Type ¹¹ ₁₆ ¹ ₄ ³ ₈ Stainless ¹ ₈ OD Steel 3 ¹³ ₁₆ ³ ₈ ³ ₈ ¹ ₁₆ ⁵ ₈ ³ ₈ Screw Screw Descrip. 6 roundhead ¼" LG, Use 30 drill Single Tube Clamps For supply lines. Clamp Const. Tube Size Screw Steel ³ ₈ OD ³ ₈ ¹ ₂ Type 303 Stainless ¹ ₄ OD ¹ ₄ ³ ₈ Steel ³ ₈ OD ³ ₈ ¹ ₂ Screw Description 10 round head, self-tapping ¹ ₄" LG, use 17 drill 6 round head, self-tapping ¹ ₄" LG, use 30 drill 10 round head, self-tapping ¹ ₄" LG, use 17 drill Note: Screws listed in above tables. Order separately. P Clamps Clamp Description Material Width Length ¹³ ₁₆" P style clamp CRS 1 2⁷ ₃₂ ³ ₈" P style clamp CRS ³ ₄" P style clamp CRS 1 2³ ₁₆ Screw Description Use or bolts Spring Coil Clamp Description Material Width Screw Description ' spring coil Steel ⁵ ₈ ID Use or bolts 23

26 Tube Fittings Heavy-Duty Heavy-Duty Tube Fittings Male Connector Tube to male pipe thread. For supply lines. Carbon steel unless noted (*) otherwise. Tube O.D. * 316 Stainless Steel Pipe Thread Hex. C Hex. D Working Press. psig / bar ¹ ₄ ¹ ₈ NPT ¹⁹ ₃₂ ⁶¹ ₆₄ ¹ ₂ ⁵ ₈ 5000 / 340 * ¹ ₄ ¹ ₈ NPT ¹⁹ ₃₂ ⁶¹ ₆₄ ¹ ₂ ⁵ ₈ 5000 / ¹ ₄ ¹ ₄ NPT ¹⁹ ₃₂ 1⁵ ₃₂ ⁵ ₈ ⁵ ₈ 5000 / 340 * ¹ ₄ ¹ ₄ NPT ¹⁹ ₃₂ 1⁵ ₃₂ ⁵ ₈ ⁵ ₈ 5000 / ³ ₈ ¹ ₈ NPT ³ ₄ 1 ⁵ ₈ ³ ₄ 5000 / ³ ₈ ¹ ₄ NPT ³ ₄ 1¹³ ₆₄ ⁵ ₈ ³ ₄ 5000 / ³ ₈ ³ ₈ NPT ³ ₄ 1¹³ ₆₄ ³ ₄ ³ ₄ 5000 / 340 Heavy-Duty Tube Fittings Union Connector Tube to tube. For supply lines. Carbon steel unless noted (*) otherwise. Tube O.D. Hex. C Hex. D Working Press. psig / bar ³ ₈ ³ ₄ 1¹ ₁₆ ⁵ ₈ ³ ₄ 6000 / 400 Heavy-Duty Tube Fittings Male Elbow Tube to male pipe thread. For supply lines. Carbon steel unless noted (*) otherwise. * * Tube O.D. Pipe Thd. Flats C Hex. D E Working Press. psig / bar ¹ ₄ ¹ ₈ NPT ¹⁹ ₃₂ ³ ₄ ⁷ ₁₆ ⁵ ₈ ²⁵ ₃₂ 5000 / ³ ₈ ¹ ₄ NPT ³ ₄ ⁵⁹ ₆₄ ⁹ ₁₆ ³ ₄ 1³ ₃₂ 5000 / ³ ₈ ¹ ₄ NPT ³ ₄ ⁵⁹ ₆₄ ⁹ ₁₆ ³ ₄ 1³ ₃₂ 5000 / ³ ₈ ³ ₈ NPT ³ ₄ 1⁷ ₆₄ ³ ₄ ³ ₄ 1⁷ ₃₂ 5000 / 340 * 316 Stainless Steel Heavy-Duty Tube Fittings Female Elbow Tube to female pipe thread. For supply lines. Carbon steel unless noted (*) otherwise. * Tube O.D. Pipe Thd. Flats C Hex. D E Working Press. psig / bar ¹ ₄ ¹ ₈ NPT ¹⁹ ₃₂ ²⁵ ₃₂ ¹ ₂ ⁵ ₈ ¹¹ ₁₆ 5000 / ¹ ₄ ¹ ₄ NPT ¹⁹ ₃₂ 1 ³ ₄ ⁵ ₈ ⁷ ₈ 5000 / 340 * 316 Stainless Steel 24

27 Tube Fittings Heavy-Duty Heavy-Duty Tube Fittings Male Run Tee Tube to male pipe thread to tube. For supply lines. Carbon steel unless noted (*) otherwise. Tube O.D. Pipe Thd. Flats C Hex. D E Working Press. psig / bar ¹ ₄ ¹ ₄ NPT ¹⁹ ₃₂ ²⁵ ₃₂ ¹ ₂ ⁵ ₈ ¹⁵ ₁₆ 5000 / 340 Heavy-Duty Tube Fittings Male ranch Tee Tube to tube to male pipe thread. For supply lines. Carbon steel unless noted (*) otherwise. Tube O.D. Pipe Thd. Flats C Hex. D E Working Press. psig / bar ³ ₈ ¹ ₄ NPT ³ ₄ ⁶³ ₆₄ ⁵ ₈ ³ ₄ 1¹ ₁₆ 5000 / 340 Heavy-Duty Tube Fittings Union Tee Tube to tube to tube. For supply lines. Carbon steel unless noted (*) otherwise. Heavy-Duty Tube Fittings Sleeve For supply lines. Carbon steel unless noted (*) otherwise. Tube O.D. * 316 Stainless Steel Tube O.D ¹ ₄ ³ ₈ * 316 Stainless Steel Flats C Hex. D Working Press. psig / bar ¹ ₄ ¹⁹ ₃₂ ³ ₄ ⁷ ₁₆ ⁵ ₈ 5000 / ³ ₈ ³ ₄ ⁶³ ₆₄ ⁵ ₈ ³ ₄ 5000 /

28 Tube Fittings Standard-Duty Standard-Duty Tube Fittings Male Connector Tube to male pipe thread. For supply and feed lines. rass unless noted (*) otherwise. Tube O.D. Pipe Thd. Hex. C Hex. D Working Press. psig / bar * ¹ ₄ ¹ ₈ NPT ³ ₄ ⁷ ₈ ⁷ ₁₆ ⁹ ₁₆ 2000 / ¹ ₄ ¹ ₄ NPT ³ ₄ 1¹ ₁₆ ⁹ ₁₆ ⁹ ₁₆ 2000 / ³ ₈ ¹ ₈ NPT ⁷ ₈ ³¹ ₃₂ ⁹ ₁₆ ¹¹ ₁₆ 2000 / ³ ₈ ¹ ₄ NPT ⁷ ₈ 1⁵ ₃₂ ⁹ ₁₆ ¹¹ ₁₆ 2000 / ¹ ₈ ¹ ₈ NPT ³³ ₆₄ ²⁷ ₃₂ ⁷ ₁₆ ¹ ₂ 2000 / 136 * 316 Stainless Steel Standard-Duty Tube Fittings Female Connector Tube to female pipe thread. For supply and feed lines. rass unless noted (*) otherwise. Tube O.D. Pipe Thd. Hex. C Hex. D Working Press. psig / bar ¹ ₄ ¹ ₈ NPT ³ ₄ ²⁵ ₃₂ ⁹ ₁₆ ⁹ ₁₆ 2000 / 136 Standard-Duty Tube Fittings Male Elbow Tube to male pipe thread. For supply and feed lines. rass unless noted (*) otherwise. * * 316 Stainless Steel Tube O.D. Pipe Thd. Flats C Hex. D E Working Press. psig / bar ¹ ₄ ¹ ₈ NPT ³ ₄ ¹⁹ ₃₂ ⁷ ₁₆ ⁹ ₁₆ ²³ ₃₂ 2000 / ¹ ₄ ¹ ₄ NPT ³ ₄ ⁵ ₈ ⁹ ₁₆ ⁹ ₁₆ ³ ₄ 2000 / ³ ₈ ¹ ₈ NPT ⁷ ₈ ¹¹ ₁₆ ⁹ ₁₆ ¹¹ ₁₆ ¹¹ ₁₆ 2000 / ³ ₈ ¹ ₄ NPT ⁷ ₈ ²³ ₃₂ ⁹ ₁₆ ¹¹ ₁₆ ²⁹ ₃₂ 2000 / ³ ₈ ³ ₈ NPT ⁷ ₈ ²⁷ ₃₂ ¹¹ ₁₆ ¹¹ ₁₆ ³¹ ₃₂ 2000 / ¹ ₈ ¹ ₈ NPT ³³ ₆₄ ²¹ ₃₂ ⁷ ₁₆ ¹ ₂ ³ ₄ 2000 / 136 Standard-Duty Tube Fittings Male Run Tee For supply and feed lines. rass unless noted (*) otherwise. Tube to male pipe thread to tube. Standard-Duty Tube Fittings Male ranch Tee Tube to tube to male pipe thread. For supply and feed lines. rass unless noted (*) otherwise. Tube O.D. Tube O.D. Pipe Thd. Pipe Thd. Flats C Flats C Hex. D Hex. D E Working Press. psig / bar ¹ ₄ ¹ ₈ NPTF ³ ₄ ²¹ ₃₂ ⁷ ₁₆ ⁹ ₁₆ ²³ ₃₂ 2000 / ³ ₈ ¹ ₄ NPTF ⁷ ₈ ²⁵ ₃₂ ⁹ ₁₆ ¹¹ ₁₆ ²⁹ ₃₂ 2000 / 136 E Working Press. psig / bar ¹ ₄ ¹ ₈ NPTF ³ ₄ ²¹ ₃₂ ⁷ ₁₆ ⁹ ₁₆ ²³ ₃₂ 2000 /

29 Tube Fittings Standard-Duty Standard-Duty Tube Fittings Female ranch Tee Tube to tube to female pipe thread. For supply and feed lines. rass unless noted (*) otherwise. Tube O.D. Pipe Thd. Flats C Hex. D E Working Press. psig / bar ³ ₈ ¹ ₄ NPTF ³ ₄ 1¹ ₁₆ ³ ₄ ¹¹ ₁₆ ⁷ ₈ 2000 / 136 Standard-Duty Tube Fittings Union Tee Tube to tube to tube. For supply and feed lines. rass unless noted (*) otherwise. Tube O.D. C Hex. D Working Press. psig / bar ¹ ₄ ³ ₄ ⁵ ₈ ⁷ ₁₆ ⁹ ₁₆ 2000 / ³ ₈ ⁷ ₈ ²³ ₃₂ ⁹ ₁₆ ¹¹ ₁₆ 2000 / 136 Standard-Duty Tube Fittings Union Tube to tube. For supply and feed lines. rass unless noted (*) otherwise. Tube O.D. Hex. C Hex. D Working Press. psig / bar ¹ ₄ ³ ₄ ²⁵ ₃₂ ⁷ ₁₆ ⁹ ₁₆ 2000 / 136 Standard-Duty Tube Fittings Sleeve For supply and feed lines. Carbon steel unless noted (*) otherwise. Included with all standard duty fittings. * Tube O.D ¹ ₄ ³ ₈ ¹ ₈ * 316 Stainless Steel Standard-Duty Tube Fittings Nut For supply and feed lines. Carbon steel unless noted (*) otherwise. Included with all standard duty fittings. * Tube O.D. Hex. D ¹ ₄ ³ ₄ ⁹ ₁₆ ¹ ₈ ³³ ₆₄ ¹ ₂ * 316 Stainless Steel 27

30 Tube Fittings Threaded Sleeve Threaded Sleeve Tube Fittings Straight Tube to male thread. For feed lines. Carbon steel with brass nut unless noted (*) otherwise. * Tube O.D. Thread Hex. C Hex. D Working Press. psig / bar ¹ ₈ ¹ ₂ ¹¹ ₁₆ ³ ₈ ⁵ ₁₆ 500 / ¹ ₈ ¹ ₄ -28 ¹ ₂ ⁵ ₈ ³ ₈ ⁵ ₁₆ 500 / ¹ ₈ ¹ ₄ -28 ¹ ₂ ⁵ ₈ ³ ₈ ⁵ ₁₆ 500 / ¹ ₈ ¹ ₄ -28 ¹ ₂ ¹¹ ₁₆ ³ ₈ ⁵ ₁₆ 500 / ¹ ₈ ⁵ ₁₆ -32 ¹ ₂ ¹¹ ₁₆ ³ ₈ ⁵ ₁₆ 500 / ¹ ₈ ³ ₈ -24 ¹ ₂ ¹¹ ₁₆ ⁷ ₁₆ ⁵ ₁₆ 500 / ¹ ₈ ¹ ₈ NPTF ¹ ₂ ⁵ ₈ ⁷ ₁₆ ⁵ ₁₆ 500 / 34 * 303 Stainless Steel Threaded Sleeve Tube Fittings 90 Elbow Tube to male thread. For feed lines. rass with brass nut unless noted (*) otherwise. Threaded Sleeve Tube Fittings 90 Elbow Tube to female pipe thread. For feed lines. rass with brass nut unless noted (*) otherwise. Threaded Sleeve Tube Fittings Drive-Type For feed lines. Steel body with brass nut. Hole Size Tube O.D. Dia. C Hex. D Working Press. psig / bar ³ ₁₆ ¹ ₈ ¹³ ₆₄ ⁴⁵ ₆₄ ⁷ ₁₆ ⁵ ₁₆ 500 / 34 Threaded Sleeve Tube Fittings Spin-Drive Type For feed lines. Steel body with brass nut. Tube O.D. Tube O.D. Hole Size Thread Pipe Thd. Tube O.D. Flats C Flats C Hex. C Hex. D Working Press. psig / bar ¹ ₄ ¹ ₈ ⁵ ₃₂ ⁵ ₈ ⁷ ₁₆ ⁵ ₁₆ 500 / 34 Threaded Sleeve Tube Fittings Compression Nuts For feed lines. rass unless noted (*) otherwise. Hex. D Hex. D Working Press. psig / bar ¹ ₈ ¹ ₈ NPT ²³ ₃₂ 1¹ ₃₂ ³ ₈ ⁵ ₁₆ 500 / 34 E Working Press. psig / bar ¹ ₈ ¹ ₄ -28 ¹ ₂ ¹ ₂ ¹³ ₃₂ ⁵ ₁₆ ³³ ₆₄ 500 / ¹ ₈ ¹ ₈ NPTF ¹ ₂ ¹ ₂ ⁷ ₁₆ ⁵ ₁₆ ²¹ ₃₂ 500 / 34 * Tube Size O.D. C Working Press. psig / bar ¹ ₈ ¹ ₂ ⁵ ₁₆ 500 / ¹ ₈ ¹ ₂ ⁵ ₁₆ 500 / ¹ ₄ ⁵ ₈ ⁷ ₁₆ 500 / 34 28

31 Tube Fittings Snap-on Couplers Snap-on Coupler Tube Fittings Straight Connect tubing to existing hydraulic (grease) fittings. luminum body, brass nut, una N packing. Tube O.D. Size Hex C D Hex Working Press. psig / bar * ⅛ 1.18 ⁷ ₁₆.43 ¼ 500 psi / 34 bar ** ¼ 1.69 ⅝.43 ⁷ ₁₆ * Uses Model compression nut (included). **Uses compression nut (included). Note: Coupling to grease fitting is a permanent connection. Snap-on Coupler Tube Fittings 90 Elbow Connect tubing to existing hydraulic (grease) fittings. luminum body, brass nut, una N packing. Tube O.D. Size Hex C D Hex Working Press. psig / bar * ⅛ ¼ 500 psi ¼ ⁷ ₁₆ 34 bar ** * Uses Model compression nut (included). **Uses compression nut (included). Note: Coupling to grease fitting is a permanent connection. 29

32 Tubing dapters Quicklinc Tubing dapter Male Straight Use with ¹ ₄" O.D. non-metallic tube for quick installation. Tubing simply pushes into place without ferrules or flairs. Nickel plated brass construction. Tube O.D. Dimensions / mm Thread Size C-Hex ¹ ₈" NPTF.984 / ¹ ₄ ¹ ₄" / / / M6 X 1-6G Tapered.965 / 24.5 Max. Oper. 250 psig 17 bar Quicklinc Tubing dapter Male 90 Elbow, Non-Swivel Use with ¹ ₄" O.D. non-metallic tube for quick installation. Tubing simply pushes into place without ferrules or flairs. Nickel plated brass construction Tube O.D. Size Thread ¹ ₈" NPTF ¹ ₄ ¹ ₄" M6 X 1-6G Tapered Dimensions / mm C D E-Flat.905 / / / / / / / / 10 Max. Oper. 250 psig 17 bar Quicklinc Tubing dapter Male 90 Elbow, Swivel Use with ¹ ₄" O.D. non-metallic tube for quick installation. Tubing simply pushes into place without ferrules or flairs. Nickel plated brass construction. Tube O.D. Size Thread ¹ ₈" NPTF.905 / ¹ ₄ ¹ ₄" Dimensions / mm C D E-Flat F-Hex.500 / / / / / 12 Max. Oper. 250 psig 17 bar Quicklinc Tubing dapter Tube Union Use with ¹ ₄" O.D. non-metallic tube for quick installation. Tubing simply pushes into place without ferrules or flairs. Nickel plated brass construction. Tube O.D. Size Dimensions / mm ¹ ₄ / / 11.7 Max. Oper. 250 psig 17 bar 30

33 ccessories Supply Line and Material Hose Type 75 High 759 High 76 High 76 High 79 Volume Med. 73 Med. 78 Med Med. I.D. ¹ ₄ ³ ₁₆ ³ ₈ ¹ ₂ ³ ₈ ¹ ₂ ⁵ ₈ Wire raid Double Single ³ ₄ Double Working M urst 5000 psig / 340 bar psig / 1360 bar 4500 psig / 306 bar 4000 psig / 272 bar 3500 psig / 238 bar 2250 psig / 153 bar 1000 psig / 68 bar 1500 psig / 102 bar 2250 psig / 153 bar Fittings ¹ ₂ -27 female ¹ ₈ NPT male psig / 1088 bar ¹ ₂ NPT female psig / 952 bar 9000 psig / 612 bar ³ ₈ NPT male 4000 psig / 68 bar ¹ ₂ NPT male 6000 psig / 408 bar 9000 psig / 612 bar ³ ₄ NPT male M end Radius 4 2¹ ₂ 5 7 Length cm Note: Refer to Design Guides for the correct hose for your system. 31

34 ccessories Feed Line Hose (SE 30R-3 Type) For flexible connections between lube outlets, anchor blocks, swivels, tube connectors and bearings. Hose is ³ ₁₆" I.D. x ³ ₈" O.D. Series Connections Working M end Radius Length ¹ ₈ O.D. tube x 500 psig / 34 bar ¹ ₈ O.D. tube cm Series Connections Working M end Radius Length ¹ ₈ NPTF(M) x 500 psig / 34 bar ¹ ₈ NPTF(M) Series Connections Working M end Radius cm Length ¹ ₈ NPTF(M) x # psig 34 bar dapter Union ¹ ₈ NPTF(M) cm Series Connections Working M end Radius Length ¹ ₈ O.D. tube x 500 psig / 34 bar ¹ ₈ NPTF(M) cm 32

35 ccessories ulk Feed Line Hose and Fittings Cut to required length and install connector fittings with standard wrenches. SE 3OR3 type hose. Temperature range -40 F to 212 F. ulk Type Hose Size Working M end Length I.D. O.D. Radius ft. / m / 7.6 ³ ₁₆ ³ ₈ 500 psig / 34 bar Specify length Fittings for Hose Construction Description Size ¹ ₈ O.D. tube x ¹ ₄ -28male ¹ ₈ NPTmale x ¹ ₄ -28male Steel Hose Stud ¹ ₄ -28male x ¹ ₄ -28male ¹ ₈ O.D. tube x ¹ ₄ -28male, 90 angle * Coupling Nut ¹ ₄ -28 female ¹ ₈ O.D. tube x ¹ ₄ -28male Type 303 Hose Stud Stainless Steel ¹ ₈ NPTmale x ¹ ₄ -28male * Coupling Nut ¹ ₄ -28 female * One coupling nut required for each hose stud. ir Hose Connect system to compressed air supply. Length ft. I.D. Specifications O.D. Thread Maximum Working urst raid ¹ ₄ ⁵ ₈ ¹ ₄ NPT male psig / 17 bar 1250 psig / 85 bar 2-Ply Rayon ³ ₈ ³ ₈ NPT male ²³ ₃₂ ¹ ₂ ¹ ₂ NPT male 200 psig / 14 bar 800 psig / 55 bar 1-Ply Rayon

36 ccessories Heavy-Duty ir Line Quick Disconnects Rugged, high flow industrial design steel couplers and nipples. Description Size Max. ir For 3/8" I.D. Hose Coupler ³ ₈" NPT F 300 psig / 20 bar For 1/2" I.D. Hose Coupler ¹ ₂" NPT F 300 psig Coupler ³ ₄" NPT F Nipple ³ ₄" NPT M 20 bar For 3/4" I.D. Hose Coupler ³ ₄" NPT F 300 psig Nipple ³ ₄" NPT M 20 bar 34

37 Pipe Fittings Pipe Fittings Reducing ushings For supply and feed lines. Thread / Construction ¹ ₈ NPTF female x ¹ ₄ NPTF male Steel ¹ ₈ NPTF female x ¹ ₂-27 NPTF male rass ¹ ₄ NPTF female x ¹ ₈ NPTF male Steel ¹ ₄ NPTF female x ¹ ₄ NPTF male Steel ¹ ₄ NPTF female x ³ ₈ NPTF male Steel ¹ ₄ NPTF female x ¹ ₂ NPTF male Steel ¹ ₄ NPTF female x ¹ ₂-27 NPTF male rass ³ ₈ NPTF female x ¹ ₄ NPTF male Steel ³ ₈ NPTF female x ¹ ₂ NPTF male Steel ³ ₈ NPTF female x ³ ₄ NPTF male Steel ¹ ₂ NPTF female x ¹ ₄ NPTF male Steel ¹ ₂ NPTF female x ³ ₄ NPTF male Steel ¹ ₂-27 NPTF female x ¹ ₂ NPTF male Steel Pipe Fittings Nipples For supply and feed lines. Thread / Style Construction ¹ ₈ NPTF male x ¹ ₈ NPTF male Hex Steel ¹ ₈ NPTF male x ¹ ₈ NPTF male Close rass ¹ ₈ NPTF male x ¹ ₄ NPTF male Hex Steel ¹ ₈ NPTF male x ¹ ₂-27 male Hex rass ¹ ₄ NPTF male x ¹ ₄ NPTF male Hex Steel ¹ ₄ NPTF male x ¹ ₄ NPTF male Hex Stainless Steel ¹ ₄ NPTF male x ¹ ₂-27 male Hex rass ³ ₈ NPTF male x ¹ ₄ NPTF male Hex Steel ³ ₄ NPTF male x ¹ ₄ NPTF male Hex Steel ³ ₄ NPTF male x ¹ ₄ NPTF male Hex Steel ³ ₈ NPTF male x ³ ₄ NPTF male Hex Steel ¹ ₂ NPTF male x ¹ ₂ NPTF male Hex Steel ¹ ₂ NPTF male x ¹ ₂-27 male Hex Steel ¹ ₂ NPTF male x ¹ ₄ NPTF male Hex Steel ¹ ₂-27 male x ¹ ₂-27 male Hex rass 35

38 Pipe Fittings Pipe Fittings Couplings For supply and feed lines. Thread / Construction ¹ ₈ NPTF female x ¹ ₈ NPTF female Steel ¹ ₈ NPTF female x ¹ ₈ NPTF female rass ¹ ₂ NPTF female x ¹ ₂ NPTF female Forged Steel Pipe Fittings Reducing Couplings For supply and feed lines. Thread / Construction ¹ ₈ NPTF female x ¹ ₂-27 NPTF female Steel ¹ ₄ NPTF female x ³ ₈ NPTF female Malleable Iron ¹ ₄ NPTF female x ¹ ₂ NPTF female Forged Steel ¹ ₄ NPTF female x ¹ ₂-27 NPTF female rass ³ ₈ NPTF female x ¹ ₂ NPTF female Forged Steel Pipe Fittings Street Ells For supply and feed lines. Thread / Construction ¹ ₈ NPTF female x ¹ ₈ NPTF male rass ¹ ₈ NPTF female x ¹ ₈ NPTF male Stainless Steel ¹ ₄ NPTF female x ¹ ₄ NPTF male rass ³ ₈ NPTF female x ³ ₈ NPTF male rass ¹ ₂ NPTF female x ¹ ₂ NPTF male Malleable Iron ³ ₄ NPTF female x ³ ₄ NPTF male Malleable Iron Pipe Fittings Tees For supply and feed lines. Thread / Construction ¹ ₈ NPTF female x ¹ ₈ NPTF female rass ¹ ₄ NPTF female x ¹ ₄ NPTF female rass ¹ ₄ NPTF female x ¹ ₄ NPTF female Stainless Steel ¹ ₂ NPTF female x ¹ ₂ NPTF female Forged Steel Street Tee Description ¹ ₈" NPT male x ¹ ₈" NPT female x ¹ ₈" NPT female 36

39 Pipe Fittings Pipe Fittings Crosses For supply and feed lines. Thread / Construction ¹ ₈ NPTF rass Pipe Fittings dapter Unions For supply and feed lines. Thread / Construction ¹ ₈ NPSM female swivel x ¹ ₈ NPTF male Steel ¹ ₄ NPSM female swivel x ¹ ₄ NPTF male Steel ³ ₈ NPSM female swivel x ³ ₈ NPTF male Steel ¹ ₂ NPSM female swivel x ¹ ₂ NPTF male Steel NPTF female swivel x 1 NPTF male Steel 37

40 ccessories Pipe Fittings Straight dapters For supply and feed lines. Carbon steel ¹ ₄-28 ¹ ₈ NPSF ⁷ ₈ ¹ ₂ ⁵ ₁₆-24 ¹ ₈ NPTF ³¹ ₃₂ ⁹ ₁₆ Metric M6 x M8 x M10 x 1 * Hex material may vary Pipe Fittings 90 dapters For supply and feed lines. Carbon Steel. C C D D ¹ ₄ /.472* ¹ ₄-28 ¹ ₈ * ¹³ ₁₆ ¹ ₂ ¹ ₈ * ¹ ₈ ** 1 ¹ ₂ ¹ ₈ * ¹ ₈ * ¹³ ₁₆ ¹ ₂ ¹ ₄ * ¹ ₄ NPTF 1⁵ ₁₆ ¹¹ ₁₆ * PTF special extra short. ** SE short. Pipe Fittings 45 dapters For supply and feed lines. Carbon Steel ¹ ₈ ** ¹ ₈ ** 1 ¹ ₂ ¹ ₄-28 ¹ ₈ * 1¹ ₁₆ ¹ ₂ * PTF special extra short. ** SE short. Supply Line Swivels Straight Swivels (one swivel section) For lubricant supply lines. Swivels have steel bodies and nitrile packing. C C D D C D ¹ ₂-27 ¹ ₂-27 ⁷ ₈ ⁹ ₁₆ ¹ ₄ NPTF ¹ ₄ NPTF ⁷ ₈ ⁹ ₁₆ ³ ₈ NPTF ¹ ₂ NPTF 1¹ ₄ ¹¹ ₁₆ ¹ ₂ NPTF ¹ ₂ NPTF 1¹ ₄ ⁷ ₈ Working 5000 psig / 340 bar 38

41 ccessories Supply Line Swivels 90 ngle Swivels (one swivel section) For lubricant supply lines. Swivels have steel bodies and nitrile packing. C D ¹ ₈ NPTF ¹ ₂-27 ⁹ ₁₆ ⁷ ₁₆ ¹ ₈ NPTF ¹ ₈ NPTF ⁵ ₈ ⁷ ₁₆ ¹ ₂-27 ¹ ₄ NPTF ⁹ ₁₆ ⁹ ₁₆ ¹ ₈ NPTF ¹ ₈ NPTF ⁷ ₁₆ ⁷ ₁₆ ¹ ₂ NPTF ¹ ₂ NPTF ⁷ ₈ ⁷ ₈ Working 5000 psig 340 bar Supply Line Swivels Universal Swivels (three swivel sections) For lubricant supply lines. Swivels have steel bodies and nitrile packing. C D ¹ ₈ NPTF ¹ ₈ NPTF ⁷ ₁₆ ⁷ ₁₆ ¹ ₄ NPTF ¹ ₄ NPTF ⁹ ₁₆ ⁹ ₁₆ ¹ ₂ NPTF ³ ₈ NPTF ⁷ ₈ ¹¹ ₁₆ ¹ ₂ NPTF ¹ ₂ NPTF ⁷ ₈ ⁷ ₈ Working 5000 psig 340 bar Feed Line Swivels 90 ngle Swivels For lubricant feed lines. ll models have a single swivel section and una N seals unless noted otherwise. Inlet * ¹ ₈ O.D. Tube ¹ ₈ * NPTF(F) * ¹ ₈ O.D. Tube ¹ ₈ NPTF (M) Outlet ¹ ₈ NPTF (M) C Length 1¹ ₄ D Hex ⁵ ₁₆ N/ ¹ ₄ -28 ¹⁵ ₁₆ ¹⁵ ₁₆ ¹ ₈ NPTF (F) 1³ ₈ ¹ ₂ E Hex/Flat ⁹ ₁₆ ³ ₈ F Flat * 303 Stainless Steel Note: Models & are similar in appearance to & , but do not include direct tube connections. ¹ ₂ Feed Line Swivels Straight Swivels For lubricant feed lines. ll models have a single swivel section and una N seals unless noted otherwise Thread Thread C Length D Hex E Flat * ¹ ₈ NPTF (F) ¹ ₈ NPTF (M) 1³ ₈ ⁹ ₁₆ * ½ ¾ ¹⁵ ₃₂ * With Viton seals. 39

42 ccessories nchor and Junction locks Securely fasten flexible supply and feed lines Description Use with Series Injectors* Installation Method SL-1, 11, 32, 33, 41, 42, 43, 44 Use ¹¹ ₃₂ drill and ¹ ₈ NPT tap nchor SL-1, 11, 32, 33, 41, 42, 43, 44 Use 3 drill and ¹ ₄ -28 tap lock ** SL-1, 11, 32, 33, 41, 42, 43, 44 Use 7 drill and ¹ ₄ -20 tap ** SL-32, 33, 42, 43 Use 7 drill and ¹ ₄ -20 tap ** Junction lock SL-32, 33, 42, 43 Use 7 drill and ¹ ₄ -20 tap * Can also be used with corresponding size supply and feed lines on Modular Lube II and Quicklub systems. ** Includes mounting screw Stand Offs for Mounting SSV Valves, P-Clamps and ngle Iron Description Valve mounting block for welding mm bolt to be used with the mm round stand off mm square stand off mm x ⁵ ₈" long bolt to be used with and mm round stand off mm x ⁵ ₈" long bolt to be used with

43 ircare ir Preparation Systems Modular ir Line Filters Maximum ir Supply 250 psig / 17 bar Material of Construction Element ody owl Material icle Size Zinc luminum Zinc* luminum* Sintered Polypropylene 40µ Drain Type Port Size PTF ¹ ₄ Manual ³ ₈ Dimensions - / mm C Dia / / / / ¹ ₂ utomatic 6.35 / Weight lbs. / kg 1.98 / / / / / / 0.8 Modular ir Line Regulators Maximum ir Supply 300 psig / 20 bar 300 psig / 20 bar 300 psig / 20 bar 300 psig / 20 bar 300 psig / 20 bar Operating Temperature Range 0 to 150 F / -18 to 65 C 0 to 150 F / -18 to 65 C 0 to 150 F / -18 to 65 C 0 to 175 F / -18 to 79 C 0 to 175 F / -18 to 79 C ody Material of Construction onnet Valve Seals Zinc cetal rass Nitrile Zinc cetal rass Nitrile Zinc cetal rass Nitrile luminum luminum rass Nitrile luminum luminum rass Nitrile ottom Plug cetal cetal cetal cetal cetal Secondary (Gauge) Connections ¹ ₈ NPT (F) ¹ ₈ NPT (F) ¹ ₈ NPT (F) ¹ ₄ NPT (F) ¹ ₄ NPT (F) Outlet dj. Range Connections NPT-Female Dimensions - / mm C D djuster Weight lbs. / kg to 150 psig / 0.3 to 4 bar ¹ ₄ ³ ₈ 4.0 / / / / / / / 83 T-Handle Knob T-Handle Knob 0.8 / to 250 psig / 0.7 to 16 bar ¹ ₂ 5 to 150 psig / 0.3 to 4 bar 5.95 / / / / / 130 T-Handle Knob 1.77 /

44 ircare ir Preparation Systems Modular ir Line Lubricators Maximum ir Supply 250 psig / 17 bar Operating Temperature Range 0 to 150 F / -18 to 65 C 0 to 175 F / -18 to 79 C * Transparent nylon liquid level indicator lens. Connections NPT-Female owl Capacity ozs. / ml ¹ ₄ 2.0 / ³ ₈ / 207 Material of Construction ody Zinc luminum owl Zinc luminum* Sight feed Dome Transp. Nylon Dimensions - / mm C D 5.27 / / 177 Recommended Lubricants Misting type oil 50 to 200 SSU (ISO Grade 7 to 46) at 100 F (38 C) Weight lbs. / kg 1.63 / / / / / / / / 0.7 Integrated/Modular Filter/Regulator with Gauge Can be used with other ircare Modular Components. Maximum ir Supply Element icle Size psig / 17 bar 40µ Outlet dj. Range 5 to 150 psig / 0.3 to 10 bar Drain Port Size Dimensions - / mm Weight Type PTF C D lbs. / kg ¹ ₄ 5.27 / / / / / Manual ³ ₈ ¹ ₂ 6.95 / / / / / 1.2 Modular ir Line Combination Units Filter-Regulator with Gauge-Lubricator Maximum ir Supply Operating Temperature Range: Element icle Size Outlet dj. Range Lubricator owl Capacity ozs. / ml psig / 17 bar 0 to 150 F / -18 to 65 C 0 to 175 F / -18 to 79 C 40µ 5 to 150 psig / 0.3 to 10 bar 2.0 / / 207 * Transparent nylon liquid level indicator lens. Drain Type Port Size PTF Dimensions - / mm Weight lbs / kgs C Manual ¹ ₄ 5.27 / / / / Manual ³ ₈ 5.27 / / / / Manual ¹ ₂ 6.95/ / / /

45 ircare ir Preparation Systems Modular ir Line Combination Units Filter-Regulator with Gauge Maximum ir Supply * Transparent nylon liquid level indicator lens. Operating Temperature Range psig / 17 0 to 150 F / -18 to 65 C bar 0 to 175 F / -18 to 79 C Element icle Size 40µ Outlet dj. Range 5 to 150 psig / 0.3 to 10 bar Drain Type Port Size PTF Dimensions - / mm C Weight lbs. / kg ¹ ₄ 5.27 / / / / 1.0 Manual ¹ ₂ 6.95 / / / / 2.0 Modular ir Line Combination Units Filter-Lubricator Maximum ir Supply 250 psig / 17 bar * Transparent nylon liquid level indicator lens. Drain Type Operating Temperature Range 0 to 175 F / -18 to 79 C Port Size PTF Element icle Size Lubricator owl Capacity ozs. / ml 40µ 7.0 / 207 Dimensions - / mm C Weight lbs. / kg Manual ¹ ₂ 6.95/ / / / 1.7 High-Capacity ir Line Filters Maximum ir Supply Operating Temperature Range Material of Construction Element ody owl Material icle Size psig / 17 bar 0 to 175 F / -18 to 79 C luminum luminum* w/ Pyrex sight glass Sintered ronze 50µ * Pyrex liquid level indicator. Drain Port Size Dimensions - / mm Weight Type PTF C Dia. lbs. / kg Manual / 265 ³ ₄ utomatic / / / / / Manual / utomatic /

46 ircare ir Preparation Systems High-Capacity ir Line Regulators Maximum ir Supply 300 psig / 20 bar Operating Temperature Range 0 to 175 F / -18 to 79 C ody luminum Material of Construction onnet Valve Seals luminum luminum / Nitrile ottom Plug luminum Secondary (Gauge) Connections ¹ ₄ NPT (F) Outlet Press. dj. Range psig / bar 10 to 250 / 0.7 to 16 5 to 150 / 0.3 to to 250 / 0.7 to 16 Connections NPT-Female ³ ₄ Dimensions - / mm C D 5.69/145 djuster T-Handle 2.38/ 4.25/ 2.38/ 4.71/120 Knob /145 T-Handle Weight lbs. / kg 2.5 / 1.1 High-Capacity ir Line Lubricators Maximum ir Supply 250 psig / 17 bar * Pyrex liquid level indicator. Connections NPT-Female ³ ₄ Operating Temperature Range 0 to 175 F / -18 to 79 C owl Capacity ozs. / ml 32 / 946 Material of Construction Sight ody owl feed Dome luminum luminum* Transp. Nylon Dimensions - / mm C Dia / / / 114 Recommended Lubricants Misting type oil 50 to 200 SSU (ISO Grade 7 to 46) at 100 F (38 C) 5.52 / 140 Weight lbs. / kg 3.6 / 1.6 High-Capacity ir Line Combination Units High-Capacity Filter-Regulator with Gauge-Lubricator Maximum ir Supply Operating Temperature Range Element icle Size Outlet dj. Range Lubricator owl Capacity ozs. / ml psig / bar 0 to 175 F / -18 to 79 C 50µ 5 to 125 psig / 0.3 to 8.6 bar 32 / 946 * Pyrex liquid level indicator. Drain Type Port Size PTF Manual ³ ₄ Manual 1 Dimensions - / mm C Weight lbs. / kg / / / /

47 ircare ir Preparation Systems High-Capacity ir Line Combination Units Filter-Regulator with Gauge Maximum ir Supply 250 psig / 17 bar * Pyrex liquid level indicator. Operating Temperature Range: Element icle Size 0 to 175 F / -18 to 79 C 50µ Outlet dj. Range 5 to 125 psig / 0.3 to 8.6 bar Drain Type Port Size PTF Dimensions - / mm C Dia. Weight lbs. / kg Manual ³ ₄ / / / / / 3.1 High-Capacity ir Line Combination Units Filter-Lubricator Maximum ir Supply psig / bar * Pyrex liquid level indicator. Operating Temperature Range: Element icle Size Lubricator owl Capacity ozs. / ml 0 to 175 F / -18 to 79 C 50µ 32 / 946 Drain Type Port Size PTF ³ ₄ Manual Dimensions - / mm C Dia. Weight lbs. / kg / / / / / 3.5 Miniature ir Line Components ir Line Filter Maximum ir Supply Operating Temperature Range: Material of Construction ody owl Material Element icle Size psig / 10 bar 0 to 125 F / -18 to 52 C Zinc Polycarbonate Porous Polypropylene 50µ Drain Port Size Dimensions - / mm Weight Type PTF C Dia. lbs. / kg Manual ¹ ₄ 3.25 / / / / /

48 ircare ir Preparation Systems Miniature ir Line Components ir Line Regulator Maximum ir Supply Operating Temperature Range ody Material of Construction onnet Valve Seals ottom Plug Secondary (Gauge) Connections psig / 20 bar 0 to 150 F / -18 to 65 C Zinc cetal rass/ Nitrile cetal ¹ ₈ NPT (F) Outlet dj. Range Connections NPT-Female Dimensions - / mm C D djuster Weight lbs./kg to 100 psig / 0.3 to 7 bar ¹ ₄ 2.52 / / / / 37 Knob 0.3 / 0.13 Miniature ir Line Components ir Line Lubricator Maximum ir Supply Operating Temperature Range: Material of Construction Sight ody owl feed Dome Recommended Lubricants psig / 10 bar 0 to 125 F / -18 to 52 C luminum Polycarbon ate Transp. Nylon Misting type oil 50 to 200 SSU (ISO Grade 7 to 46) at 100 F (38 C) Connections NPT-Female owl Capacity ozs. / ml Dimensions - / mm C Dia. Weight lbs. / kg ¹ ₄ 1.0 / / / / / / 0.13 Miniature ir Line Combination Units Filter-Regulator with Gauge-Lubricator Maximum ir Supply Operating Temp. Range Element icle Size Outlet dj. Range Lubricator owl Capacity ozs. / ml psig / 10 bar 0 to 150 F / -18 to 65 C 50µ 5 to 100 psig / 0.3 to 6.9 bar 1.0 / 30 Port Size Dimensions - / mm Weight Drain Type PTF C Dia. lbs. / kg Manual ¹ ₄ 3.25 / / / / /

49 ircare ir Preparation Systems Miniature ir Line Combination Units Filter-Lubricator Maximum ir Supply Operating Temperature Range Element icle Size Lubricator owl Capacity ozs. / ml psig / 10 bar 0 to 125 F / -18 to 52 C 5µ 1.0 / 30 Port Size Dimensions - / mm Weight Drain Type PTF C Dia. lbs. / kg Manual ¹ ₄ 3.25 / / / / / 0.4 Modular ir Line Equipment ccessories Lockout Valve Install in-line or modular with other ircare products to help conform to OSH Lockout Regulations. In the closed position, valves block inlet air flow and exhaust downstream air. For Modular use with For In-Line use with ¹ ₄" Modular ¹ ₄" ⅜" Modular ⅜" ¹ ₂" Modular ¹ ₂" Maximum ir Supply 250 psig / 17 bar Operating Temperature Range: 0 to 150 F / -20 to 65 C Modular ir Line Equipment ccessories Quick Clamp Use with Modular ir Line Components to provide modular installation capability. Flanges on the products slide into V grooves in the quick clamp. Two face-sealing O-rings in the quick clamp provide an air tight connection when the clamp is closed. For Modular Sizes Dimensions / mm ¹ ₄" and ³ ₈" 1.50 / ¹ ₂" and ³ ₄" 2.00 / 51 Modular ir Line Equipment ccessories Quick Clamp Wall Mounting racket Use with quick clamp to provide secure mounting to a wall, machine panel or other flat surface. For Modular Dimensions - / mm Sizes C ¹ ₄" and ³ ₈" 2.32 / / / ¹ ₂" and ³ ₄" 3.25 / / /

50 ircare ir Preparation Systems Modular ir Line Equipment ccessories Quick Mount Pipe dapters Use with quick clamp to provide threaded connections to the system piping. For Modular use with Port Size ³ ₈" Modular ³ ₈ ¹ ₂" and ³ ₄" Modular ³ ₄ Modular ir Line Equipment ccessories Manifold lock Installs with quick clamps. Ports are threaded pipe to provide manifolding capability for up to three components. Port Size For Modular Dimensions - / mm Sizes ³ ₄ ¹ ₂" and ³ ₄" 2.27 / / 80 Modular ir Line Equipment ccessories Tamper Resistant Cover & Seal Wire Install on the adjusting knob of regulators to help prevent unauthorized adjustment of the pressure setting. For Modular Sizes ¹ ₂" and ³ ₄" Modular ir Line Equipment ccessories Wall Mount racket Use to secure Modular ir Line components to a wall, machine panel or other flat surface. For Modular Sizes ¹ ₄" and ³ ₈" ¹ ₂" and ³ ₄" Modular ir Line Equipment ccessories Switch Monitors air pressure and provides an electrical signal when the pressure drops below or exceeds the preset pressure. Installs between two quick clamps. lso provides three additional ¹ ₄" auxiliary outlets. For Modular Sizes Maximum Inlet psi / bar ¹ ₂" and ³ ₄" 250 / 17 Operating Temperature Range 0 to 150 F / -20 to 65 C djustment Range psi / bar 30 to 150 / 2 to 10 48

51 ircare ir Preparation Systems ir Line Equipment ccessories Mounting racket and Nut Miniature Use to secure Miniature ir Line components to a wall, machine panel or other flat surface. Component ll Regulators and Lubricators ir Line Equipment ccessories Gauges vailable in ¹ ₈" NPT and ¹ ₄" NPT back connection. For Regulator Sizes Gauge Diameter Connection Range ¹ ₄" and ⅜" 1½" ⅛" NPT 0 to 160 psig / to ¹ ₂", ³ ₄" and 1" 2" ¼" NPT 0 to 300 psig / 0 to 20 bar Manual Shut-Off Valves High- Needle Valves For supply lines. Inlet/Outlet Female NPTF(F) (Valve Open) / cm Dimension / cm 778 ¹ ₄" 3¹ ₁₆ / 7.8 2¹ ₂ / ³ ₈" 3³ ₄ / 9.5 2⁷ ₈ / ¹ ₂" 3³ ₄ / 9.5 2⁷ ₈ / 7.3 Max. Working psig / 680 bar Manual Shut-Off Valves Quarter-Turn Valves For supply lines. Connections Dimension Female NPTF(F) / cm / cm ¹ ₂" 6¹ ₃₂ / ⁵ ₈ / ³ ₄" 6⁵ ₃₂ / ⁷ ₈ / " 7¹⁹ ₃₂ / ¹ ₄ / 10.8 Manual Shut-Off Valves Low- Quarter-Turn Valves Inlet/Outlet NPTF (F) Max. Working 2000 psig / 136 bar Max. Working ¹ ₂ 710 psig / 48 bar ¹ ₄ 300 psig / 20 bar 49

52 ircare ir Preparation Systems Gauges High- Gauges For lubricant supply lines. Gauges Low- Gauges For air lines. Maximum Register Maximum Register Indicator Needle Indicator Needle Dial Diameter / mm Dial Diameter Size Size Location psig / Single kg/cm² Dual ottom 2¹ ₂ / psig / ¹ ₄ kg/cm² Single NPT(M) ack Center psig / 3¹ ₂ / kg/cm² Dual 2¹ ₂ / 65 ottom Connection Location ottom 200 psig / ¹ ₄ NPT(M) Single 2 ack Center 14 kg/cm² ¹ ₈ NPT(M) ottom Lubricant Filters Remove solid contaminants before delivering lubricants to the supply line.filters mount in pump outlet before vent valve on reciprocating pump systems. Element Size micron * In-line filter with Viton seal. Maximum : Connections Hex ody Size psig / 340 bar ½ NPTF (M) ¼ Lubricant Strainers Remove solid contaminants before delivering lubricants to the supply line.strainers mount at pump inlet. Use with Pump/Model Type Strainer Size Series 20 Models 1823/ Micron Note: Not recommended for use with heavy lubricants. 50

53 Decimal Equivalents Decimal Equivalents Fraction Decimal mm Fraction Decimal mm ¹ ₆₄ ³³ ₆₄ ¹ ₃₂ ¹⁷ ₃₂ ³ ₆₄ ³⁵ ₆₄ ¹ ₁₆ ⁹ ₁₆ ⁵ ₆₄ ³⁷ ₆₄ ³ ₃₂ ¹⁹ ₃₂ ⁷ ₆₄ ³⁹ ₆₄ ¹ ₈ ⁵ ₈ ⁹ ₆₄ ⁴¹ ₆₄ ⁵ ₃₂ ²¹ ₃₂ ¹¹ ₆₄ ⁴³ ₆₄ ³ ₁₆ ¹¹ ₁₆ ¹³ ₆₄ ⁴⁵ ₆₄ ⁷ ₃₂ ²³ ₃₂ ¹⁵ ₆₄ ⁴⁷ ₆₄ ¹ ₄ ³ ₄ ¹⁷ ₆₄ ⁴⁹ ₆₄ ⁹ ₃₂ ²⁵ ₃₂ ¹⁹ ₆₄ ⁵¹ ₆₄ ⁵ ₁₆ ¹³ ₁₆ ²¹ ₆₄ ⁵³ ₆₄ ¹¹ ₃₂ ²⁷ ₃₂ ²³ ₆₄ ⁵⁵ ₆₄ ³ ₈ ⁷ ₈ ²⁵ ₆₄ ⁵⁷ ₆₄ ¹³ ₃₂ ²⁹ ₃₂ ²⁷ ₆₄ ⁵⁹ ₆₄ ⁷ ₁₆ ¹⁵ ₁₆ ²⁹ ₆₄ ⁶¹ ₆₄ ¹⁵ ₃₂ ³¹ ₃₂ ³¹ ₆₄ ⁶³ ₆₄ ¹ ₂ Note: 1 inch = 25.4 millimeters To convert decimals to millimeters multiply by 25.4 Example: ¹ ₄" =.250".250" x 25.4 = 6.35 mm To convert millimeters to decimals, divide by 25.4 Example: 6.35 mm 25.4 =.250" = ¹ ₄" 51

54 Numerical Index Viton and Teflon are registered trademarks of DuPont Performance Elastomers Page Page G G , 20, , C , C , , 20, , C , C , , C , 20, , C , , C , C C C C C C C C C , 20, C , 20, C , C , , , C , C , 20, C , 20, , C , , C , , , , , , 20, C , 20, C ,

55 Numerical Index Page Page , , 16, , 16, , , , 16, 21, , 21, , 21, , 21, , 21, , , , , , , , , , , , , , , , , , , , , 32, , 28, , , , 17,

56 Numerical Index Page Page , , , ,

57 Numerical Index Page Page , , , , , , , , , , , 16, , , , , , , , , , , 16, ,

58 Numerical Index Page Page , ,

59 complete line of lubrication solutions and industrial pumping products t every construction site, automobile repair shop and industrial plant, maintenance and automotive service professionals need highquality lubrication equipment and pumping products. Lincoln offers everything you need for lubrication. Our general-purpose and heavyduty pumps, hose reels, meters and controls, used fluid systems and hand-held lubrication products are the best in the industry.