82 Series Fittings Table of Contents

Transcription

1 Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number Male NPTF Pipe - Rigid Straight Male NPTF Pipe - Swivel - Straight Female NPTF Pipe - Rigid Straight G82 Female NPSM Pipe Gasket Joint - Swivel - Straight Male JIC 37 - Rigid Straight Female JIC 37 Swivel Female JIC 37 - Swivel 45 Elbow - Short Drop Female JIC 37 - Swivel 90 Elbow - Short Drop Female JIC 37 - Swivel 90 Elbow - Long Drop Male SAE 45 - Rigid Straight Female SAE 45 - Swivel Straight Female SAE 45 Swivel - 45 Elbow Female SAE 45 Swivel - 90 Elbow Male Inverted SAE 45 - Swivel Straight Male Inverted SAE 45 - Swivel 45 Elbow Male Inverted SAE 45 - Swivel 90 Elbow Female Inverted SAE 45 - Rigid Straight J082 Male Seal-Lok - Rigid Straight (with O-Ring) JC82 Female Seal-Lok - Swivel Straight - Short J782 Female Seal-Lok - Swivel 45 Elbow J982 Female Seal-Lok - Swivel 90 Elbow - Short Drop J582 Female Seal-Lok - Swivel 90 Elbow - Medium Drop J182 Female Seal-Lok - Swivel 90 Elbow - Long Drop Male Standpipe - Rigid Straight (Inch Size Tube O.D.) Push-Lok Union D082 Male Metric L Rigid Straight (24 Cone) D82 Male Standpipe Metric L - Rigid Straight C382 Female Metric L - Swivel Straight (all Nose) C482 Female Metric L - Swivel 45 Elbow (all Nose) C582 Female Metric L - Swivel 90 Elbow (all Nose) Male SP Taper Pipe - Rigid Straight Female SP Parallel Pipe Swivel - Straight (60 Cone) D982 Male SP Parallel Pipe - Rigid Straight (60 Cone) Female SP Parallel Pipe Swivel - 90 Elbow (60 Cone) V82 Male SP Taper Pipe - Rigid 45 Elbow Z82 Male SP Taper Pipe - Rigid 90 Elbow or Side Outlet DIN Metric anjo Straight AM anjo olt with DIN Metric Thread Push-Lok Kits Part No. 4-83A Part No A Push-Lok Merchandiser PLM -1 (801 Hose) PLM -2 (821 Hose) Push-Lok Assembly Instructions Push-Lok Disassembly Instructions Hose Products Division

2 Pipe Male NPTF Pipe - Rigid Straight - rass Fitting. C - Stainless Steel Fitting. Part Thread Hose A H Number inch inch inch mm inch inch mm /8x27-2 1/ / /8x27-2 1/ / C 1/8x27-2 1/ / /8x27-2 3/ / /8x27-2 3/ / C+ 1/8x27-2 3/ / /4x18-4 1/ / /4x18-4 1/ / C 1/4x18-4 1/ / /4x18-4 3/ / /4x18-4 3/ / C 1/4x18-4 3/ / /4x18-4 1/ / /4x18-4 1/ / C+ 1/4x18-4 1/ / /8x18-6 1/ / /8x18-6 1/ / /8x18-6 3/ / /8x18-6 3/ / C 3/8x18-6 3/ / /8x18-6 1/ / /8x18-6 1/ / /2x14-8 1/ / /2x14-8 3/ / C 1/2x14-8 3/ / /2x14-8 3/ / /2x14-8 1/ / /2x14-8 1/ / C 1/2x14-8 1/ / /2x14-8 5/ / /2x14-8 5/ / /2x14-8 3/ / /2x14-8 3/ / /4x / / /4x / / /4x / / /4x / / C 3/4x / / x11-1/2-16 1/ / C+ 1x11-1/2-16 1/ / x11-1/ / x11-1/ / Hose Products Division

3 Pipe Male NPTF Pipe - Swivel Straight This fitting allows minor movement under pressure to relieve stress on hose. It it is not to be used for continuous or extreme swiveling. O-Ring is not compatible with Phosphate Ester Fluids. with an SM suffix have a metric hex. - rass Fitting. C - Stainless Steel Fitting. V - Viton Seal. Part Thread Hose A H W Number inch inch inch mm inch inch inch mm /8x27-2 1/ /2 5/ /8x27-2 3/ /2 5/ /4x18-4 1/ / /4x18-4 1/ / C+ 1/4x18-4 1/ / /4x18-4 3/ /2 5/ /8x18-6 3/ / V-6-6C+ 3/8x18-6 3/ / /2x14-8 1/ / C+ 1/2x14-8 1/ / SM+ 1/2x14-8 1/ mm /2x14-8 5/ /4 7/ /4x / /8 1-1/ Female NPTF Pipe - Rigid Straight - rass Fitting. Part Thread Hose A H Number inch inch inch mm inch inch mm /8x27-2 1/ / /8x27-2 1/ / /4x18-4 1/ / /4x18-4 1/ / /4x18-4 3/ / /4x18-4 3/ / /8x18-6 3/ / /2x14-8 1/ / /2x14-8 5/ / /4x / / /4x / / Hose Products Division

4 Pipe / JIC 37G82 Female NPSM Pipe Gasket Joint - Swivel - Straight Part Gasket Thread Hose A W Number inch inch inch mm inch inch mm 37G G-4 1/4x18-4 1/ / G G-4 1/4x18-4 3/ / G G-6 3/8x18-6 3/ / G G-8 1/2x14-8 1/ G G-8 1/2x14-8 5/ G G-12 3/4x / / Male JIC 37 - Rigid Straight - rass Fitting. C - Stainless Steel Fitting. Part Thread Hose A H Number inch inch inch mm inch inch mm /4 7/16x20-4 1/ / /4 7/16x20-4 1/ / C+ 1/4 7/16x20-4 1/ / /4 7/16x20-4 3/ / /16 1/2x20-5 1/ / /16 1/2x20-5 1/ / /8 9/16x18-6 1/ / /8 9/16x18-6 1/ / /8 9/16x18-6 3/ / /8 9/16x18-6 3/ / /8 9/16x18-6 1/ / /8 9/16x18-6 1/ / /2 3/4x16-8 1/ / /2 3/4x16-8 1/ / C+ 1/2 3/4x16-8 1/ / C+ 1/2 3/4x16-8 3/ / /8 7/8x / / /8 7/8x / / /8 7/8x / / /4 1-1/16x / / /4 1-1/16x / / /16x / /16x / Hose Products Division

5 JIC Female JIC 37 Swivel ~ These fittings contain a dual seat that accepts both the JIC (37 ) and SAE (45 ) male configurations. The -6 and -12 SAE (45 ) swivel fittings are shown under part number rass Fitting. C - Stainless Steel Fitting. Part Thread Hose A W Number inch inch inch mm inch inch mm ~ 1/4 7/16x20-4 1/ / ~ 1/4 7/16x20-4 1/ / C~ 1/4 7/16x20-4 1/ / ~+ 1/4 7/16x20-4 1/ / ~ 5/16 1/2x20-5 1/ / ~ 5/16 1/2x20-5 1/ / C~+ 5/16 1/2x20-5 1/ / ~+ 5/16 1/2x20-5 3/ / /8 9/16x18-6 1/ / /8 9/16x18-6 1/ / C+ 3/8 9/16x18-6 1/ / /8 9/16x18-6 3/ / /8 9/16x18-6 3/ / C 3/8 9/16x18-6 3/ / /8 9/16x18-6 1/ / /8 9/16x18-6 1/ / ~+ 1/2 3/4x16-8 3/ / ~ 1/2 3/4x16-8 3/ / C~+ 1/2 3/4x16-8 3/ / ~ 1/2 3/4x16-8 1/ / ~ 1/2 3/4x16-8 1/ / C~ 1/2 3/4x16-8 1/ / ~+ 1/2 3/4x16-8 5/ / ~+ 5/8 7/8x / ~ 5/8 7/8x / ~ 5/8 7/8x / ~ 5/8 7/8x / C~ 5/8 7/8x / /4 1-1/16x / / /4 1-1/16x / / /4 1-1/16x / / /4 1-1/16x / / C 3/4 1-1/16x / / /8 1-3/16x / / /16X / / /16X / /16X / Hose Products Division

6 JIC Female JIC 37 - Swivel 45 Elbow - Short Drop ~ These fittings contain a dual seat that accepts both the JIC (37 ) and SAE (45 ) male configurations. The -6 and -12 SAE (45 ) swivel fittings are shown under part number C - Stainless Steel Fitting. Part Thread Hose A E H W Number inch inch inch mm inch mm inch inch inch mm ~ 1/4 7/16x20-4 1/ /16 9/ /8 9/16x18-6 3/ /2 11/ ~ 1/2 3/4x16-8 1/ /8 7/ C~+ 1/2 3/4x16-8 1/ /8 7/ ~+ 5/8 7/8x / / ~+ 5/8 7/8x / / /4 1-1/16x / /8 1-1/ Female JIC 37 - Swivel 90 Elbow - Short Drop ~ These fittings contain a dual seat that accepts both the JIC (37 ) and SAE (45 ) male configurations. The -6 and -12 SAE (45 ) swivel fittings are shown under part number C - Stainless Steel Fitting. Part Thread Hose A E H W Number inch inch inch mm inch mm inch inch inch mm ~ 1/4 7/16x20-4 1/ /16 9/ ~+ 5/16 1/2x20-5 1/ /16 9/ /8 9/16x18-6 1/ /2 11/ /8 9/16x18-6 3/ /2 11/ ~+ 1/2 3/4x16-8 3/ /8 7/ ~ 1/2 3/4x16-8 1/ /8 7/ C~+ 1/2 3/4x16-8 1/ /8 7/ ~+ 5/8 7/8x / / ~+ 5/8 7/8x / / /4 1-1/16x / /8 1-1/ /4 1-1/16x / /8 1-1/ /8 1-3/16x / /8 1-3/ Hose Products Division

7 JIC / SAE Female JIC 37 - Swivel 90 Elbow - Long Drop ~ These fittings contain a dual seat that accepts both the JIC (37 ) and SAE (45 ) male configurations. Part Thread Hose A E H W Number inch inch inch mm inch mm inch inch inch mm ~ 1/4 7/16x20-4 1/ /16 9/ /8 9/16x18-6 3/ /2 11/ Male SAE 45 - Rigid Straight - rass Fitting. Part Thread Hose A H Number inch inch inch mm inch inch mm /4 7/16x20-4 1/ / /4 7/16x20-4 1/ / /4 7/16x20-4 3/ / /16 1/2x20-5 1/ / /16 1/2x20-5 1/ / /16 1/2x20-5 3/ / /16 1/2x20-5 3/ / /8 5/8x18-6 3/ / /8 5/8x18-6 3/ / /2 3/4x16-8 1/ / /2 3/4x16-8 1/ / /8 7/8x / / /4 1-1/16x / / Hose Products Division

8 SAE Female SAE 45 - Swivel Straight ~ These fittings contain a dual seat that accepts both the JIC (37 ) and SAE (45 ) male configurations. The -6 and -12 JIC (37 ) swivel fittings are shown under part number rass Fitting. Notch in nut for SAE 45 flare. Part Thread Hose A W Number inch inch inch mm inch inch mm ~ 1/4 7/16x20-4 1/ / ~ 1/4 7/16x20-4 1/ / ~ 5/16 1/2x20-5 1/ / ~ 5/16 1/2x20-5 1/ / C~+ 5/16 1/2x20-5 1/ / /8 5/8x18-6 1/ / /8 5/8x18-6 3/ / /8 5/8x18-6 3/ / /8 5/8x18-6 1/ / ~+ 1/2 3/4x16-8 3/ / ~ 1/2 3/4x16-8 3/ / C~+ 1/2 3/4x16-8 3/ / ~ 1/2 3/4x16-8 1/ / ~ 1/2 3/4x16-8 1/ / ~ 5/8 7/8x / ~ 5/8 7/8x / ~ 5/8 7/8x / /4 1-1/16x / / /4 1-1/16x / / Female SAE 45 Swivel - 45 Elbow Notch in nut for SAE 45 flare. Part Thread Hose A E H W Number inch inch inch mm inch mm inch inch inch mm /4 7/16x20-4 1/ /16 9/ /8 5/8x18-6 3/ /2 3/ /2 3/4x16-8 1/ /8 7/ Hose Products Division

9 Inverted SAE Female SAE 45 Swivel - 90 Elbow Notch in nut for SAE 45 flare. Part Thread Hose A E H W Number inch inch inch mm inch mm inch mm inch mm /4 7/16x20-4 1/ /16 9/ /8 5/8x18-6 3/ /2 3/ /2 3/4x16-8 1/ /8 7/ Male Inverted SAE 45 - Swivel Straight Part Thread Hose A H W Number inch inch inch mm inch inch inch mm /16 3/8x24-3 1/ /8 3/ /4 7/16x24-4 1/ /16 7/ /16 1/2x20-5 1/ /16 1/ /16 1/2x20-5 3/ /2 1/ /8 5/8x18-6 3/ /2 5/ /2 3/4x18-8 1/ /8 3/ /8 7/8x / /4 7/ /4 1-1/16x / /8 1-1/ Hose Products Division

10 Inverted SAE Male Inverted SAE 45 - Swivel 45 Elbow C - Stainless Steel Fitting. Part Thread Hose A E H W Number inch inch inch mm inch mm inch inch inch mm /4 7/16x24-4 1/ /16 7/ /8 5/8x18-6 3/ /2 5/ C+ 3/8 5/8x18-6 3/ /2 5/ Male Inverted SAE 45 - Swivel 90 Elbow Part Thread Hose A E H W Number inch inch inch mm inch mm inch inch inch mm /4 7/16x24-4 1/ /8 7/ /16 1/2x20-5 1/ /16 1/ /8 5/8x18-6 3/ /2 5/ /8 5/8x18-6 5/ /4 5/ /2 3/4x18-8 1/ /8 3/ Hose Products Division

11 Inverted SAE Female Inverted SAE 45 - Rigid Straight - rass Fitting. Part Thread Hose A H Number inch inch inch mm inch inch mm /16 3/8x24-3 1/ / /4 7/16x24-4 1/ / /16 1/2x20-5 1/ / /16 1/2x20-5 3/ / /8 5/8x18-6 3/ / /2 3/4x18-8 3/ / /2 3/4x18-8 1/ / /4 1-1/6x / / Hose Products Division

12 Seal Lok 3J082 Male Seal-Lok - Rigid Straight (with O-Ring) Seal-Lok torque table in Section G. O-Rings are listed in Section F. with a SM suffix have a metric hex. Part number 3JM82 is 3J082 without Nitrile O-Ring. Part Thread Hose A H Number inch inch inch mm inch inch mm 3J SM 3/8 11/16x16-6 3/ mm J /2 13/16x16-8 1/ / J SM 1/2 13/16x16-8 1/ mm J SM+ 1/2 13/16x16-8 5/ mm J SM+ 5/8 1x / mm J SM 5/8 1x / mm J /4 1-3/16x / / J SM+ 3/4 1-3/16x / mm JC82 Female Seal-Lok - Swivel Straight - Short Seal-Lok torque table in Section G. O-Rings are listed in Section F. with a SM suffix have a metric hex. When measuring overall length to end of nut, + C must be used to calculate cut-off allowance. Part Thread Hose A C H W Number inch inch inch mm inch mm inch inch inch mm 3JC /4 9/16x18-4 1/ /16 11/ JC82-4-4C 1/4 9/16x18-4 1/ /16 11/ JC SM+ 1/4 9/16x18-4 1/ mm 17mm JC /8 11/16x16-6 3/ /16 13/ JC82-6-6C 3/8 11/16x16-6 3/ /16 13/ JC SM 3/8 11/16x16-6 3/ mm 22mm JC /2 13/16x16-8 3/ /16 15/ JC SM+ 1/2 13/16x16-8 3/ mm 24mm JC /2 13/16x16-8 1/ /16 15/ JC82-8-8C 1/2 13/16x16-8 1/ /16 15/ JC SM 1/2 13/16x16-8 1/ mm 24mm JC /2 13/16x16-8 5/ /4 15/ JC SM 1/2 13/16x16-8 5/ mm 24mm JC SM 5/8 1x / mm 30mm JC /8 1x / /16 1-1/ JC /8 1x / /16 1-1/ JC C+ 5/8 1x / /16 1-1/ JC SM 5/8 1x / mm 30mm JC /8 1x / / JC /4 1-3/16x / /8 1-3/ JC C 3/4 1-3/16x / /8 1-3/ JC SM+ 3/4 1-3/16x / mm 36mm JC /16x /8 1-5/ JC Non-Standard 1 1-7/16x /8 1-5/ Hose Products Division

13 Seal Lok 3J782 Female Seal-Lok - Swivel 45 Elbow Seal-Lok torque table in Section G. C - Stainless Steel Fitting. O-Rings are listed in Section F. with a SM suffix have a metric hex. Part Thread Hose A E W Number inch inch inch mm inch mm inch inch mm 3J /4 9/16x18-4 1/ / J C+ 1/4 9/16x18-4 1/ / J SM+ 1/4 9/16x18-4 1/ mm J /8 11/16x16-6 3/ / J SM+ 3/8 11/16x16-6 3/ mm J /2 13/16x16-8 3/ / J /2 13/16x16-8 1/ / J SM 1/2 13/16x16-8 1/ mm J /8 1x / / J SM+ 5/8 1x / mm J /4 1-3/16x / / J SM+ 3/4 1-3/16x / mm J982 Female Seal-Lok - Swivel 90 Elbow - Short Drop Seal-Lok torque table in Section G. O-Rings are listed in Section F. with SM suffix have metric hex. Part Thread Hose A E W Number inch inch inch mm inch mm inch inch mm 3J /4 9/16x18-4 1/ / J SM+ 1/4 9/16x18-4 1/ mm J /8 11/16x16-6 3/ / J SM 3/8 11/16x16-6 3/ mm J /8 11/16x16-6 1/ / J /2 13/16x16-8 3/ / J /2 13/16x16-8 1/ / J SM 1/2 13/16x16-8 1/ mm J SM 1/2 13/16x16-8 5/ mm J /8 1x / / J SM 5/8 1x / mm J /4 1-3/6x / / Hose Products Division

14 Seal Lok 3J582 Female Seal-Lok - Swivel 90 Elbow - Medium Drop Seal-Lok torque table in Section G. O-Rings are listed in Section F. with SM suffix have metric hex. Part Thread Hose A E W Number inch inch inch mm inch mm inch inch mm 3J /8 1x / / J SM 5/8 1x / mm J182 Female Seal-Lok - Swivel 90 Elbow - Long Drop Seal-Lok torque table in Section G. O-Rings are listed in Section F. with SM suffix have metric hex. Part Thread Hose A E W Number inch inch inch mm inch mm inch inch mm 3J /4 9/16x18-4 1/ / J SM+ 1/4 9/16x18-4 1/ mm J /8 11/16x16-6 3/ / J SM+ 3/8 11/16x16-6 3/ mm J SM+ 1/2 13/16x16-6 3/ mm J /2 13/16x16-8 1/ / J SM 1/2 13/16x16-8 1/ mm J /8 1x / / J SM+ 5/8 1x / mm Hose Products Division

15 Standpipe / Union Male Standpipe - Rigid Straight (Inch Size Tube O.D.) - rass Fitting. C - Stainless Steel Fitting. Part Thread Hose A D Number inch inch inch mm inch mm inch mm /16-3 1/ /4-4 1/ C 1/4-4 1/ /16-5 1/ /16-5 1/ /8-6 1/ /8-6 3/ C 3/8-6 3/ /2-8 1/ C 1/2-8 1/ /8-10 5/ C+ 5/8-10 5/ /4-12 3/ C+ 3/4-12 3/ Push-Lok Union - rass Fitting. C - Stainless Steel Fitting. Part Hose A Number inch inch mm / / C+ 1/ / / C+ 3/ / / C+ 1/ / / / / Hose Products Division

16 Metric L 3D082 Male Metric L Rigid Straight (24 Cone) with an SA suffix have an inch hex Mates with EO L Series. C - Stainless Steel Fitting. Part Thread Hose A H Number inch inch inch mm inch inch mm 3D M12x1,5-6 1/ D SA+ 6 M12x1,5-6 3/ / D M14x1,5-8 1/ D M16x1,5-10 3/ D M18x1,5-12 3/ D M22x1,5-15 1/ D M26x1,5-18 5/ D M30x2-22 3/ D82 Male Standpipe Metric L - Rigid Straight Mates with EO L Series. Part Thread Hose A D Number mm inch inch mm inch mm inch mm 31D / D / D / D / D / D / D / Hose Products Division

17 Metric L 3C382 Female Metric L - Swivel Straight (all Nose) Mates with EO L Series. When measuring overall length to end of nut, + C must be used to calculate cut-off allowance. C - Stainless Steel Fitting. Part Thread Hose A C W Number mm inch inch mm inch mm mm inch mm 3C M12x1,5-6 1/ C M14x1,5-8 1/ C M16x1,5-10 3/ C M18x1,5-12 3/ C M22x1,5-15 1/ C M26x1,5-18 5/ C M30x2-22 3/ C482 Female Metric L - Swivel 45 Elbow (all Nose) Mates with EO L Series. C - Stainless Steel Fitting. Part Thread Hose A E W Number mm inch inch mm inch mm mm inch mm 3C M12x1,5-6 1/ C M14x1,5-8 1/ C M16x1,5-10 3/ C M18x1,5-12 3/ C M22x1,5-15 1/ C M26x1,5-18 5/ C M30x2-22 3/ Hose Products Division

18 Metric L / SP 3C582 Female Metric L - Swivel 90 Elbow (all Nose) Mates with EO L Series. C - Stainless Steel Fitting. Part Thread Hose A E W Number mm inch inch mm inch mm mm inch mm 3C M12x1,5-6 1/ C M14x1,5-8 1/ C M16x1,5-10 3/ C M18x1,5-12 3/ C M22x1,5-15 1/ C M26x1,5-18 5/ C M30x2-22 3/ Male SP Taper Pipe - Rigid Straight with an SA suffix have an inch hex - rass Fitting. C - Stainless Steel Fitting. Part Thread Hose A H Number inch inch inch mm mm inch mm /4x19-4 1/ /4x19-4 1/ C+ 1/4x19-4 1/ /4x19-4 3/ /8x19-6 3/ /8x19-6 3/ C-SA+ 3/8x19-6 3/ /8" /8x19-6 1/ /2x14-8 1/ /2x14-8 1/ C+ 1/2x14-8 1/ /4x / /4x / /4x / C-SA+ 3/4x / /8" Hose Products Division

19 SP Female SP Parallel Pipe Swivel - Straight (60 Cone) When measuring overall length to end of nut, + C must be used to calculate cut-off allowance. - rass Fitting. Part Thread Hose A C W Number mm inch inch mm inch mm mm inch mm /4x19-4 1/ /4x19-4 1/ /8x19-6 3/ /8x19-6 3/ /2x14-8 1/ /8x / /4x / D982 Male SP Parallel Pipe - Rigid Straight (60 Cone) When used in a part, a bonded seal must be used. C - Stainless Steel Fitting. Part Thread Hose A H Number inch inch inch mm mm inch mm 3D /8x28-2 1/ D /4x19-4 1/ D /4x19-4 3/ D /8x19-6 3/ D /2x14-8 1/ D C+ 1/2x14-8 1/ D /2x14-8 5/ D /8x / D /4x / Hose Products Division

20 SP 3282 Female SP Parallel Pipe Swivel - 90 Elbow (60 Cone) Part Thread Hose A E W Number inch inch inch mm inch mm mm inch mm /4x19-4 1/ /8x19-6 3/ /2x14-8 1/ /8x / /4x / V82 Male SP Taper Pipe - Rigid 45 Elbow rass Fitting. Part Thread Hose A E Number inch inch inch mm inch mm inch mm 3V /4x19-4 3/ Z82 Male SP Taper Pipe - Rigid 90 Elbow or Side Outlet rass Fitting. Part Thread Hose A E Number inch inch inch mm inch mm inch mm 3Z /4x19-4 3/ Z /4x19-4 3/ Hose Products Division

21 anjo Union DIN Metric anjo Straight Part R Hose A Number mm inch inch mm inch mm / / / / / / / / AM anjo olt with DIN Metric Thread Two (2) copper washers per bolt must be ordered seperately. Part Thread H Number mm mm 2 AM-03 8 M8x AM M10x AM M12x AM M14x AM M16x AM M18x AM M22x1, AM M26x1, AM M30x1, Hose Products Division

22 Push-Lok Kits Parker Push-Lok Kits Parker Push-Lok Kits are for industrial and automotive maintenance and repair shops. They provide a low-cost inventory of Push-Lok hose and ends packaged in a sturdy metal container. They save time and money on hose line replacements for water, air, lubricating oils, anti-freeze solutions, diesel fuel and vacuum applications. Part No. 4-83A # Quantity ulk Hose (1/4" I.D.) 10 ft. Male Pipe Female Pipe Male SAE SAE (JIC) 37 Female Sw ivel # Quantity Male Inverted Sw ivel Female Inverted Rigid Straight Tube Hose Union Part No A # Quantity Hose (1/4" I.D.) 24 ft (3/8" I.D.) 24 ft. Male Pipe Male SAE SAE (JIC) 37 Female Sw ivel SAE 45 Sw ivel # Quantity Male Inverted Sw ivel Female Inverted Rigid Hose Union Hose Products Division

23 Push-Lok Merchandiser Parker Push-Lok Merchandiser PLM -1 (801 Hose) PLM -2 (821 Hose) The Push-Lok Merchandiser is an ideal method of displaying Push-Lok in will-call areas, maintenance shops, or other areas where air lines are fabricated. Features The Push-Lok hose and fitting merchandiser offers the following features: Hose quantity feet 1/4" I.D feet 3/8" I.D feet 1/2" I.D. 25 each of the following fittings: Fitting drawers to store up to 18 different styles/sizes of fittings. A hand held hose cutter 30" tape measure -255 Hose Products Division

24 Assembly Instructions Push-Lok Assembly Instructions OAL OAL: Straight to Straight 1. Identify Over All Length (OAL) of hose assembly and the Cut Off Allowance (COA) length of fitting(s) by use of the fitting data table. 4. Insert fitting into hose until first barb is in the hose. 2. Properly measure and mark hose. Cut hose squarely with a Parker Push-Lok cut-off tool or a sharp knife. 3. Lubricate the Push-Lok fitting, hose I.D., or both with light oil or soapy water only - DO NOT USE HEAVY OIL OR GREASE. 5. Place end fitting against a flat object such as a work bench of wall. Grip hose approximately one inch from end and push with a steady force until the end of the hose is covered by the yellow plastic cap. Push-Lok Disassembly Instructions 1. Leave fitting in place, and cut hose approximately one inch lengthwise from the yellow plastic cap. IMPORTANT: e careful not to nick barbs when cutting hose. 2. Grip hose firmly and give it a sharp downward tug away from the fitting for disassembly. Caution: Insert the Push-Lok fitting all the way into the Push-Lok hose until the cut end is concealed by the yellow plastic cap. Caution: Sealing integrity may be damaged by use of exterior clamps. IF YOU HAVE QUESTIONS CONCERNING THE PRODUCTS OR APPLICATION OF THE PRODUCTS CONTAINED IN THIS CATALOG, PLEASE CALL: PARKER HOSE PRODUCTS DIVISION - TECHNICAL SERVICES DEPARTMENT PHONE: FAX: Hose Products Division