N/** поставка оборудования для подготовки воздуха

Transcription

1 M/0000 Series Inline /, 5/ and 5/ Spool Valves Solenoid and Pilot Actuated G / Low power solenoids High flow Unique steel reinforced seals Light weight corrosion resistant materials Technical Data Medium: Compressed air, filtered, lubricated and non-lubricated Operation: Spool Valve, directly actuated Mounting: Through-holes in valve body Port Size: G / Operating Pressure: Maximum 0 bar. For details see overleaf. Flow Characteristics: C b A l/min Cv Kv M/04/*** 4,8 0,4 57,450,5,04 M/054/*** 4,8 0,4 57,450,5,04 Operating Temperature: -0 C* to +80 C (for solenoid models, +5 C* to +50 C) *Consult our Technical Service for use below + C Materials Aluminium valve body and spool, nitrile rubber seals. Ordering Information To order, quote model number followed by voltage code from table overleaf. eg. M/054//6 for a solenoid actuated, spring return model with an external pilot supply and suitable for an electricity supply of 4-48v 50/60Hz. / 5/ 5/ All Ports Blocked mid position 5/ Centre Open Exhaust 0/96 N/**

2 M/0000 General Information /, 5/ and 5/ Solenoid and Pilot Actuated Valves Symbol Model Manual Pilot Operator Mid Return Return Operating Pilot Weight Spares Override Supply Pressure (bar) Pressure (bar) (Kg) Kit 0 M/04//MD Turn to lock Internal Solenoid - Spring, ,78 QM/0//D/00 0 M/04/ Turn to lock External Pilot - Pilot, - 0,+ (0,xOP),5 QM/04//00 0 M/04/ Turn to lock External Pilot - Pilot (0,xOP),5 QM/04// M/054//MD Turn to lock External Solenoid - Spring (0,xOP),5 QM/054// M/054//MD Turn to lock External Solenoid - Solenoid,7-0,7 + (, X OP)*, QM/054// M/054/7/MD Turn to lock Internal Solenoid - Spring and Air,5-0 -, QM/054/7/ M/054//MD Turn to lock Internal Solenoid - Solenoid,8-0 -, QM/054// M/054/6/MD Turn to lock Internal Solenoid APB Solenoid,8-0 -, QM/054/6/ M/054/6/MD Turn to lock Internal Solenoid COE Solenoid,8-0 -, QM/054/6/00 0 M/054/ - - Pilot - Spring (0, X OP)*,5 QM/054//00 M/054/ - - Pilot - Pilot,7-0,7 + (0, X OP)*,0 QM/054// M/054/ - - Pilot Priority - Pilot,5-0,5 + (0, X OP),0 QM/054// M/054/6 - - Pilot APB Pilot,8-0,8 + (0, X OP)*,0 QM/054/6/ M/054/6 - - Pilot COE Pilot,8-0,8 + (0, X OP)*,0 QM/054/6/00 APB = All Ports Blocked COE = Centre Open Exhaust OP = Operating Pressure Valve model M/04//D can also be used as a normally open valve. For normally open operation, rotate top plate 80 Note : For pilot priority valve For port at zero - port 4 =,5 + (0,05 x OP) bar For port 4 at zero - port =, + (0, x OP) bar For permanent supply to port - port 4 =,5 + (0,7 x OP) bar N/** /96

3 M/0000 Electrical Details for Solenoid Operators Voltage Codes 6V d.c (low power) 59 V d.c (low power) 60 V d.c 6 4V d.c. (low power) 7 4V d.c V d.c 57 48V d.c (low power) 6 0V d.c (low power) V d.c 58 V 50Hz (low power) 6 4 V 50Hz (low power) 64 4V 50/60Hz V 50/60Hz 6 48V 50Hz (low power) 65 0V 50Hz (low power) V 50Hz 0V 50Hz (low power) 67 0-V 50/60Hz 7 Voltage Tolerance: d.c.: +0/-5%, a.c: +0/-5% Power d.c: W Power a.c. (Inrush/Hold): 4/,5 VA (9/5 VA on 0/V) 00% E.D. Inlet Orifice:,0 mm Exhaust Orifice:,0 mm,, (low power) Terminal Box: pin plug with cable grip (DIN Form B) May be rotated 80 Cable Entry: Pg 9 Solenoid Coil: May be rotated at 90 intervals. Manual Override: Standard, turn 80 anti-clockwise to operate, turn clockwise to return Protection Class: IP 65 (DIN 050) Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under Technical Data. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult Norgren. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products where applicable. 0/96 N/**

4 M/0000 M/04//MD / Single Solenoid Valve M/054//MD 5/ Single Solenoid Valve ,5 M/054/7/MD 5/ Single Solenoid Valve 7 9 7,5 7,5 4,5 5 Ø 5,5 '' '' '' 4 G /8 M/054//MD & M/054//MD Models 5/ Double Solenoid Valves ,5 5,5 G / x 5 4, ,5 5 Ø 5,5 4,5 5,5 '' '' '' '' '' '' 64,5,5 N/** /96

5 M/0000 M/054/6/MD & M/0/6/MD Models 5/ Double Solenoid Valves M/054/ 5/ Single Pilot Valve , M/054/7, M/054/6 & M/0654/6 Models 5/, 5/ Double Pilot Valves,5,5 7,5 G / G /8 G /8 64 4,5 5 Ø 5,5 6,5 7,5 7,5 G / G /8 4, ,5 5 '' '',5,5 Ø 5,5 '', M/04/ & M/04/ Pressure Set-reset, Pressure Actuated, Spring Return G / G / B 5,5 4 0/96 N/**