Rapid push-in fittings for plastic tubes Series 1000
|
|
- Ira Barton
- 5 years ago
- Views:
Transcription
1 CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6, M12x1, M12x1,25), BSP (G1/8, G1/, G3/8, G1/2), BSPT (R1/8, R1/, R3/8, R1/2) Series 1000 rapid push-in fittings can be easily installed. The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape of the guiding cone ensures that the tube cannot be accidentally cut. GENERAL DATA Fitting with connecting tube Materials Threads Pressure Tube to connect Diameters Fluid Temperature body and nut: nickel-plated brass O-ring: NBR thread seals: PTFE, PA, AL GAS, conical ISO 7 (BSPT) GAS, cylindrical ISO 228 (BSP) M5 - M6 NPT and metric (available on request) the nominal pressure of the fittings is always higher than the pressure of the tube PA polyethylene braided PVC rilsan PU, Hytrel Polyester from 5/3 15/12.5 mm compressed air low pressure fluids see data for tubing used /
2 > Rapid fittings Series 1000 CATALOGUE > Release 8.5 Fittings Mod Metric-BSPT Male Connector Mod. Tube A C1 H I L R SW SW1 Weight (g) /3-1/8 5/3 R1/8 2 7,5 12,5 2,5 1, /-1/8 6/ R1/8 3 7, /-1/ 6/ R1/ , /-3/8 6/ R3/8 3 11, ,5 18, /-1/2 6/ R1/ , /-M12x1,25 6/ M12X1, /6-1/8 8/6 R1/8 5 7, /6-1/ 8/6 R1/ , /6-3/8 8/6 R3/8 5 11, ,5 18, /6-1/2 8/6 R1/ , /8-1/8 10/8 R1/8 6,5 7,5 16,5 28,5 16, /8-1/ 10/8 R1/ 6, ,5 32, /8-3/8 10/8 R3/8 6,5 11,5 16, /8-1/2 10/8 R1/2 6,5 1 16, , /10-3/8 12/10 R3/8 8,5 11,5 18 3, /10-1/2 12/10 R1/2 8, ,5 20, /12,5-1/2 15/12,5 R1/ , Fittings Mod Metric Male Connector Sprint Mod. Tube A C1 H I L R SW SW1 Weight (g) /3-M5 5/3 M5 2 12, , /3-M6 5/3 M6 2 12, , /3-1/8 5/3 G1/8 2 5,5 12,5 23,8 11, /-M5 6/ M5 3 13, , /-M6 6/ M6 3 13, , /-1/8 6/ G1/8 3 5, ,3 13, /-1/ 6/ G1/ , /-3/8 6/ G3/ ,3 13, /6-1/8 8/6 G1/8 5 5, ,3 13, /6-1/ 8/6 G1/ , /6-3/8 8/6 G3/ ,3 13, /8-1/8 10/8 G1/8 6,5 5,5 16,5 27,8 13, /8-1/ 10/8 G1/ 6,5 7 16,5 29, /8-3/8 10/8 G3/8 6,5 8 16,5 30,8 1, /8-1/2 10/8 G1/2 6,5 9 16,5 32, /10-3/8 12/10 G3/8 8, ,3 1, /10-1/2 12/10 G1/2 8, /12,5-1/2 15/12,5 G1/ , / * = with O-Ring
3 CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Fittings Mod Swivel Male Connector Sprint Mod. Tube A C1 H I L R SW SW1 SW2 Weight (g) /-1/8 6/ G1/8 3 5, /-1/ 6/ G1/ , /6-1/8 8/6 G1/8 5 5, /6-1/ 8/6 G1/ , /8-1/ 10/8 G1/ 6,5 7 16,5 3, /8-3/8 10/8 G3/8 6,5 8 16, , /10-3/8 12/10 G3/8 6, Fittings Mod. 163 BSP Female Connector Mod. Tube B C1 I L R SW SW1 Weight (g) 163 5/3-1/8 5/3 G1/ , /-1/8 6/ G1/ , /-1/ 6/ G1/ , /-3/8 6/ G3/ , /6-1/8 8/6 G1/ , /6-1/ 8/6 G1/ , /6-3/8 8/6 G3/ , /8-1/8 10/8 G1/8 6,5 16,5 21, /8-1/ 10/8 G1/ 6,5 16, , /8-3/8 10/8 G3/8 6,5 16, , /8-1/2 10/8 G1/2 6,5 16,5 33 2, /10-3/8 12/10 G3/8 8, ,5 20, /
4 > Rapid fittings Series 1000 CATALOGUE > Release 8.5 Fittings Mod. 151 Swivel Male Elbow Sprint Mod. Tube A C1 E H M R SW SW1 SW2 Weight (g) 151 6/-1/8 6/ G1/ ,5 22, /-1/ 6/ G1/ , /6-1/8 8/6 G1/ ,5 22, /6-1/ 8/6 G1/ , /8-1/ 10/8 G1/ 6, , Fittings Mod Fix Metric-BSPT Male Elbow Mod. Tube A C1 E H M R SW SW1 Weight (g) /3-1/8 5/3 R1/ ,5 21, /-1/8 6/ R1/ ,5 22, /-1/ 6/ R1/ 3 15, , /-3/8 6/ R3/ ,5 23, /-M12x1,25 6/ M12x1, , /6-1/8 8/6 R1/ ,5 22, /6-1/ 8/6 R1/ 5 15, , /6-3/8 8/6 R3/ , /6-1/2 8/6 R1/2 5 21, /8-1/8 10/8 R1/8 6,5 15 7,5 25, /8-1/ 10/8 R1/ 6, , /8-3/8 10/8 R3/8 6,5 16,5 11,5 25, /8-1/2 10/8 R1/2 6, , /10-3/8 12/10 R3/8 8, , /10-1/2 12/10 R1/2 8, ,5 20, /12,5-1/2 15/12,5 R1/ , /2.05.0
5 CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Fittings Mod /3-M5 Metric Fix Male Elbow Mod. Tube A C1 E H M R SW SW1 Weight (g) /3-M5 5/3 M , Fittings Mod. 193 BSP Female Elbow Mod. Tube B C1 E M R SW SW1 Weight (g) 193 6/-1/8 6/ G1/ , /-1/ 6/ G1/ 3 23, , /6-1/8 8/6 G1/ , /6-1/ 8/6 G1/ 5 23, /8-1/ 10/8 G1/ 6,5 23,5 27, /10-3/8 12/10 G3/8 8,5 2,5 30,5 20, Fittings Mod. 131 Swivel Male Tee Sprint Mod. Tube A C1 E H M R SW SW1 SW2 Weight (g) 131 6/-1/8 6/ G1/ ,5 22, /-1/ 6/ G1/ , /6-1/8 8/6 G1/ ,5 22, /6-1/ 8/6 G1/ , /8-1/ 10/8 G1/ 6, , /
6 > Rapid fittings Series 1000 CATALOGUE > Release 8.5 Fittings Mod. 110 BSPT Fix Male Tee Mod. Tube A C1 E H M R SW SW1 Weight (g) 110 5/3-1/8 5/3 R1/8 2 12,5 7,5 21, /-1/8 6/ R1/8 3 12,5 7,5 22, /-1/ 6/ R1/ 3 15, , /6-1/8 8/6 R1/ ,5 22, /6-1/ 8/6 R1/ 5 15, , /8-1/8 10/8 R1/8 6,5 15 7,5 25, /8-1/ 10/8 R1/ 6, , /8-1/2 10/8 R1/2 6,5 21,5 1 28, /10-3/8 12/10 R3/8 8, , /10-1/2 12/10 R1/2 8,5 21,5 1 30,5 20, /12,5-1/2 15/12,5 R1/ , , Fittings Mod. 120 Lateral BSPT Male Tee Mod. Tube A C1 E H L M R SW SW1 Weight (g) 120 5/3-1/8 5/3 R1/8 2 12,5 7,5 37,5 21, /-1/8 6/ R1/8 3 12,5 7,5 38,5 22, /-1/ 6/ R1/ 3 15, , /6-1/8 8/6 R1/ , , /6-1/ 8/6 R1/ 5 15, , /8-1/8 10/8 R1/8 6,5 15 7,5 3,5 25, /8-1/ 10/8 R1/ 6, , /
7 CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Fittings Mod Complete Metric-BSP Single Adjustable Banjo Mod. Tube A C1 H L S M R W SW SW1 Weight (g) /3-M5 5/3 M , ,5 Ø /3-1/8 5/3 G1/ ,5 22,5 16 Ø /-M5 6/ M , ,5 Ø /-1/8 6/ G1/ ,5 2 16,5 Ø /-1/ 6/ G1/ ,5 8, ,5 Ø /-3/8 6/ G3/ , ,5 Ø /6-1/8 8/6 G1/ ,5 2 16,5 Ø /6-1/ 8/6 G1/ ,5 8, ,5 Ø /6-3/8 8/6 G3/ , ,5 Ø Fittings Mod Complete Single Adjustable Long Banjo Mod. Tube A C1 H L S M R W SW SW1 Weight (g) /-1/8 6/ G1/ ,5 2 16,5 Ø /-1/ 6/ G1/ ,5 12, ,5 Ø /-3/8 6/ G3/ , ,5 Ø /6-1/8 8/6 G1/ ,5 2 16,5 Ø /6-1/ 8/6 G1/ ,5 12, ,5 Ø /6-3/8 8/6 G3/ , ,5 Ø /8-1/8 10/8 G1/8 6, , ,5 Ø /8-1/ 10/8 G1/ 6,5 8 33,5 12, ,5 Ø /8-3/8 10/8 G3/8 6, ,5 29,5 21 Ø /8-1/2 10/8 G1/2 6, , ,5 Ø /10-3/8 12/10 G3/ ,5 31,5 21,5 Ø /10-1/2 12/10 G1/2 8, ,5 33,5 23,5 Ø /12,5-1/2 15/12,5 G1/ ,5 36,5 25 Ø /
8 > Rapid fittings Series 1000 CATALOGUE > Release 8.5 Fittings Mod Single Banjo Mod. Tube C1 M O R V W SW1 Weight (g) /3-M5 5/ ,5 5,1 Ø /3-M6 5/ ,5 5,1 Ø /3-1/8 5/3 2 22,5 1,5 16 9,8 Ø /-M5 6/ ,5 5,1 Ø /-M6 6/ ,5 5,1 Ø /-1/8 6/ 3 2 1,5 16,5 9,8 Ø /-1/ 6/ ,5 18,5 13,2 Ø /-3/8 6/ ,5 20,5 16,7 Ø /6-1/8 8/ ,5 16,5 9,8 Ø /6-1/ 8/ ,5 18,5 13,2 Ø /6-3/8 8/ ,5 20,5 16,7 Ø /8-1/8 10/8 6,5 25 1,5 16,5 9,8 Ø /8-1/ 10/8 6,5 27 1,5 18,5 13,2 Ø /8-3/8 10/8 6,5 29,5 1, ,7 Ø /8-1/2 10/8 6,5 32 1,5 23,5 21 Ø /10-3/8 12/ ,5 1,5 21,5 16,7 Ø /10-1/2 12/10 8,5 33,5 1,5 23,5 21 Ø /12,5-1/2 15/12, ,5 1, Ø = Assembled with Mod = Assembled with Mod. SCU, SVU, SCO... M5 Fittings Mod assembled with Mod. 1631, 1635 Double Banjo Mod. Tube C1 M O R V W SW1 Weight (g) /-M5 6/ ,5 5,1 Ø /-1/8 6/ 3 2 1,5 16,5 9,8 Ø /-1/ 6/ ,5 18,5 13,2 Ø /6-1/8 8/ ,5 16,5 9,8 Ø /6-1/ 8/ ,5 18,5 13,2 Ø /
9 CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Fittings Mod Single Banjo Stem Assembled with adjustable fittings Mod. 6610; 6620; 1610; 1620; 2023; 1170 Mod. A H L S SW Weight (g) M5 M5 18 5, /8 G1/ , / G1/ 8 29,5 8, /8 G3/ , /2 G1/ , = zinc-plated steel Fittings Mod Single Long Banjo Stem Assembled with adjustable fittings Mod. 6610; 6620; 1610; 1620; 2023; 1170 Mod. A H L S SW Weight (g) /8 G1/ , / G1/ 8 33,5 12, /8 G3/ , /2 G1/ , M12x1,25 M12x1, ,5 12, M12x1,5 M12x1,5 8 33,5 12, Fittings Mod Double Banjo Stem Assembled with adjustable fittings Mod. 6610; 6620; 1610; 1620; 2023; 1170 * = models that can be assembled with 1/ banjo fittings Mod. A H L SW Weight (g) /8 G1/ / G1/ 8 5, /8 G3/ /
10 > Rapid fittings Series 1000 CATALOGUE > Release 8.5 Fittings Mod Double Long Banjo Stem Assembled with adjustable fittings Mod. 6610; 6620; 1610; 1620; 2023; 1170 Mod. A H L SW Weight (g) /8 G1/ / G1/ 8 58, /8 G3/ /2 G1/ Fittings Mod Triple Banjo Stem Assembled with adjustable fittings Mod. 6610; 6620; 1610; 1620; 2023; 1170 Mod. A H L SW Weight (g) /8 G1/ / G1/ 8 61, /8 G3/ Fittings Mod Union Connector Mod. Tube C1 C2 L R1 R2 SW SW1 SW2 Weight (g) /3 5/ ,5 7,5 7, / 6/ 3 3 3, /6 8/ ,5 9,75 9, /8 10/8 6,5 6, ,5 10, /10 12/10 8,5 8,5 1 10,5 10, /12,5 15/12, /6-6/ 8/6-6/ 5 3 3,5 9,75 9, /8-6/ 10/8-6/ 6,5 3 36,5 10, /
11 CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Fittings Mod Bulkhead Union Reducer Mod. Tube B C1 C2 L R MAX SW SW1 SW2 Weight (g) /3 5/3 M7x0, / 6/ M10x /6 8/6 M12x /8 10/8 M1x1 6,5 6, /10 12/10 M16x1 8,5 8, /-5/3 6/-5/3 M10x /6-6/ 8/6-6/ M12x Fittings Mod Elbow Connector Mod. Tube C1 C2 M1 M2 R1 R2 SW SW1 Weight (g) / 6/ ,5 22, /6 8/ ,5 22, /8 10/8 6,5 6,5 25,5 25, /10 12/10 8,5 8, /12,5 15/12, ,5 22, Fittings Mod. 150 Tee Connector Mod. Tube C1 C2 M1 M2 R1 R2 SW SW1 SW2 Weight (g) 150 5/3 5/ ,5 21, / 6/ ,5 22, /6 8/ ,5 22, /8 10/8 6,5 6,5 25,5 25, /10 12/10 8,5 8, /12,5 15/12, ,5 22, /6-6/ 8/6-6/ ,5 22, /8-6/ 10/8-6/ 6,5 3 25,5 23, , /8-8/6 10/8-8/6 6,5 5 25, , /
12 > Rapid fittings Series 1000 CATALOGUE > Release 8.5 Fittings Mod Cross Connector Mod. Tube C1 M R SW SW1 Weight (g) / 6/ 3 22, /6 8/6 5 22, Fittings Mod. 170 Adaptor with Junction Mod. Tube F C1 G L R SW1 Weight (g) 170 6/ 6/ , /6 8/ , Accessories Mod Aluminium Washer Mod. A B H Weight (g) /8 1 9,8 1, / 18 13,2 1, / ,7 1, / ,9 1, ,5 33, 1,5 2 /
13 CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Accessories Mod Plastic Washer Mod. A B H Weight (g) 2661 M3,9 2,8 0, M5 8 5, M6 9 6, /8 1 10,2 1, / 18 13,5 1, / ,5 2, / ,2 1,9 1 Accessories Mod Plastic Washer Mod. A B H Weight (g) /8 1 9, / 18 13, / , / ,1 5 1 Accessories Mod Plastic Washer Mod. A B H Weight (g) /8 1 9, / 18 13, / , / , /
14 > Rapid fittings Series 1000 CATALOGUE > Release 8.5 Accessories Mod Blocking nut Mod. Tube B D D1 L SW1 Weight (g) /3-M7x0,75 5/3 M7x0,75 5,1 8,8 8, /-M8x0,75 6/ M8x0,75 6,1 9,8 8, /-M10x1 6/ M10x1 6,1 13, /6-M12x1 8/6 M12x1 8,2 15, /8-M1x1 10/8 M1x1 10,15 17, /10-M16x1 12/10 M16x1 12, , /12,5-M20x1 15/12,5 M20x1 15,2 2, Accessories Mod Blocking nut with metal spring Mod. Tube B F D D1 G L SW Weight (g) /-M10x1 6/ M10x1 8,9 6,1 13, , /6-M12x1 8/6 M12x1 10,9 8,2 15,5 18 9, /8-M1x1 10/8 M1x1 12,5 10,15 17, , /10-M16x1 12/10 M16x1 15,5 12, , /12,5-M20x1 15/12,5 M20x1 18,5 15,2 2, /2.05.1
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
More informationFittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
More informationSuper-rapid fittings Series X6000 in Stainless Steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in Stainless Steel 316L CATALOGUE > s 2012 Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2),
More informationin stainless steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in stainless steel 316L Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2), BSPT (R1/8, R1/, R3/8,
More informationPneumatics CONTENT
Pneumatics CONTENT 2 3 4 5 6 7 8 9 Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators
More informationEISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
More informationPipe fittings and tubing T, MPL, PNZ
Catalogue 2001 Pipe fittings and tubing T, MPL, PNZ Tube od ø4/2, 5/3, 6/4, 8/6, 10/8, 12/10, 14/12, 15/12,5 Connections M5, G1/8, G1/4, G3/8, G1/2 R1/8, R1/4, R3/8, R1/2, R3/4 7 When involved in factory
More informationComposite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
More informationQuick-release couplings Series 5000
CATALOGUE > Release 8. > Quick-release couplings Series 5000 Quick-release couplings Series 5000 Nominal diameter ø 5 and 7 mm - Plastic tubes 6/, 8/6, 10/8 Rubber hoses 6x1, 8x17, 10x19, 13x23 Connections
More informationFittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
More informationBASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function.
BASICLINE PROGRAM Standard components for pneumatics pilot operated check valve Messing throttle with click function rotary connector 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY
More informationCOUPLING CATALOGUE. Push-In, Standard, Conventional, Accessories
COUPLING CATALOGUE Push-In, Standard, Conventional, Accessories Coupling Catalogue Table of Content Push-in and Composite Building Block... 4 Standard Connectors... 12 Quick Connection Systems P5.... 16
More informationMale stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
More informationFIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
More informationStandard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
More informationA Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
More information37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
More informationLF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
More information05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationCode Desc /8. Tecnical Features. Inlet diameter with reductions 1/2-3/8
Filter - regulator - lubricator Three in one tool which combines in a single body for the air filter, regulator and lubricator outlet pressure in line for pneumatic tools. Necessary where there is any
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationPlug-in connections M3... M7, G 1/8... G 3/4
Plug-in connections M3... M7, G 1/8... G 3/4 Nickel-plated brass, Stainless steel, Plastic, POM Straight threaded plug-in connections Basic fittings, short Basic fittings, long Schott-plug-in connections
More informationINOX PrOgram made by eisele
EISELE INOXline Program Stainless steel connection solutions Quality solutions Made by EISELE INOX 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 5.000
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199
More informationMessing. screw-in connectors
Messing screw-in connectors 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively underline
More informationfunnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
More informationFunction Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
More informationSCREW HOSE COUPLINGS SCREW HOSE COUPLINGS B.1. STANDARD. LMC s screw hose couplings with a smooth hose shank comply with EN / DIN 2817.
SCREW HOSE COUPLINGS B.1. STANDARD LMC s screw hose couplings with a smooth hose shank comply with EN 14420-5 / DIN 2817. OPERATION Screw hose couplings are used to connect hoses with male or female BSP,
More informationLIQUIDLINE PROGRAM. Connections for cooling water. dezincification-resistant brass. Messing. aluminium.
LIQUIDLINE PROGRAM Connections for cooling water dezincification-resistant brass Messing aluminium stainless steel 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents,
More informationØ5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
More informationMARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
More informationHyva Hoses & Adapters Introduction
Introduction Hyva Hoses Hoses offered by HYVA comply with the highest safety standards for truck hydraulics. Working pressures range from 225 to 350 bar. Code system hydraulic hoses Hose 1 H.P. 16-2000
More informationSUMMARY STAINLESS STEEL FITTINGS FITTINGS P PUSH-IN FITTINGS, STAINLESS STEEL D3.2 P STANDARD FITTINGS SERIES XA D3.8 P QUICK FITTINGS SERIES XC D3.
SUMMARY STAINLESS STEEL D3 P PUSH-IN, STAINLESS STEEL D3.2 P STANDARD SERIES XA D3.8 P QUICK SERIES XC D3.11 SUMMARY STAINLESS STEEL D3.1 PUSH-IN, STAINLESS STEEL The push-in fittings in the XR can be
More informationLF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
More informationMetal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Industrial Application
Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Straight, Male 45, Male 90, Male Straight, Female Straight, Cable Hose, Male Straight Swivel Fittings Ferrules for Fittings Further Accessories Applications
More informationEISELE LIQUIDLINE PROGRAM CONNECTIONS FOR COOLING WATER
PROGRAM CONNECTIONS FOR COOLING WATER QUALITY SOLUTIONS MADE BY EISELE LIQUID 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 3,500 standard articles,
More informationconnection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
More informationGroup 16. Fittings Brass - Galvanized, AISI Pneumatics
Group 16 Fittings Brass - Galvanized, AISI 316 - Pneumatics 16 INDEX Page Contents 2 Index 3-4 Low pressure AISI 316, Brass and Galvanized Malleable Iron ransitions and Nipples 5-6 Brass Fittings Series
More informationISO PNEUMATIC CYLINDERS PAC-Y SERIES Ø32 - Ø125
ISO 15552 PNEUMATIC CYLINDERS PAC-Y SERIES Ø32 - Ø125 PAC-Y GENERAL INFORMATION PAC-Y SERIES ISO 15552-32 - 125 CUSHIONING CYLINDER ELOXAL PLATE AND SPECIAL ROD SEAL PROVIDING HYGIENE AND LONG WORKING
More informationBRASS FITTINGS (R410a) BRASS FITTINGS
(R410a) R410a Short Barrel Flare Nuts 5010404410A 1/4 $4.21 5010808410A 1/2 $8.52 5010504410A 5/16fl x 1/4 tube $5.73 5011010410A 5/8 $13.50 5010606410A 3/8 $7.08 5011212410A 3/4 $20.54 BRASS FITTINGS
More information4 PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS
PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS High performance fittings, easy to be used. Strong but also compact in order to ensure the maximum assembling flexibility. Silicon free materials. In compliance
More informationTubes and stiffener sleeves Use of stiffener sleeves
Tubes and stiffener sleeves Use of stiffener sleeves very thick wall thickness not recommended thicker wall thickness decreasing pressure resistance increasing wall thickness ideal wall thickness no stiffener
More informationFITTINGS, CONTROLS AND ACCESSORIES
, CONTROLS AND ACCESSORIES Regardless of your application, Norgren has fittings and accessories to complete your pneumatic package. Norgren has an extensive lineup of Pneufit push-in fittings in metric
More informationHOSE, TUBE & CONNECTION FITTINGS CATALOGUE. JSG Industrial Systems quality industry solutions. Fire Suppression Systems. Flow Measurement Systems
HOSE, TUBE & CONNECTION FITTINGS CATALOGUE JSG Industrial quality industry solutions Lubrication Management Material Dispensing Management Hose & Cable Management Diesel & Fluid Management Fire Suppression
More informationBrass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.
Brass Push-Type Fittings MALE ADAPTER SWIVEL MALE ELBOW 35.0 /8 0-3 35. /8 /6 35.4 /8 /8 35.6 5/3 0-3 35.8 5/3 /8 35.34 5/3 /4 35.40 3/6 0-3 35.4 3/6 /8 35.54 /4 0-3 35.56 /4 /8 35.58 /4 /4 35.6 /4 3/8
More information?????? Part No Part No. 20SF 30SF 40SF 20SM 30SM 40SM 20SH 30SH 40SH. Part No.
Jamec Pem 310 Series Couplers Single button operation. Will pass approximately 30cfm at 100psi. Jamec Pem 330 Series Adaptors?????? 13.0980 13.0985 13.0990 13.0950 13.0965 13.0970 13.0975 13.0930 13.0935
More informationSpecialty Fluid Fittings
Buyers guide Specialty Fluid Fittings for lubrication systems FEATURING Couplings & s Adapters Compression fittings Check valves Meter and control units bijur.com B r6-06 Buyer's guide to specialty fluid
More informationBALL VALVES FILTERS TEST POINTS 8
BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves
More informationLocal solutions for individual customers worldwide PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES STAUFF UK. Super Air Service!
Local solutions for individual customers worldwide STAUFF UK PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES www.stauff.co.uk PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES Tube Connectors In Line Flow Control
More informationstainless steel compression fittings
compression fittings principle of compression fittings egris has used its long experience of brass compression fittings to develop a range of compression fittings. These fittings are resistant to aggressive
More informationFittings and Accessories. For oil and grease. For Centralized Lubrication Systems and General Use
Fittings and Accessories For oil and grease. For Centralized ubrication Systems and General Use Fittings and Accessories This brochure provides an overview of metallic pipe unions for luid engineering.
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More informationThreaded fittings. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready
More informationRaccordi gasolio forati 1 via. Connections eye no beat. Bicones brass joints. Fittings for braking and diesel systems
Raccordi gasolio forati 1 via Tipo di materiale: acciaio Filettatura metrica Code Desc. d x L x pace 1450000100 6x15x1 1450000195 8x16x1 1450000200 8x16x1,25 1450000210 10x23x1 1450000212 10x18x1,25 1450000214
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
More informationThreaded fittings. Festo core product range Covers 80% of your automation tasks
Threaded fittings q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationAluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
More informationComposite Right Angle Flow Control Valves BSP/Metric Series PSCU, PMCU, PSVU, PMVU, PSCO, PMCO
Flow Control Valves BSP NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Composite Right Angle Flow Control Valves BSP/Metric Series PSCU, PMCU, PSVU, PMVU, PSCO, PMCO Non-Swivel Design:
More informationLubrication Systems. Section 26
Lubrication Systems Section 26 26-1 INFORMATION - SYSTEMS The Lincoln QuickLub is an automated and centralised lubrication system that can improve productivity and extend the service life of your plant.
More information40-501, , ,
-9 Silencer, plastic. -5, -5 Silencer, sintered bronze. - Flow control silencer. -5 Check valves. -5 Hand sliding valves. -5, -5 Quick couplings. -5 Miniature regulator, screw-in type.6-55 Check valves.7-56,
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
More informationEnergy Measurement Solutions Aluminium Piping Solutions Pneumatic and Pure Water Push In Fittings High Pressure Push In Piping Solutions Pneumatic Components Fittings for Fluids & Gases www.pneumsysenergy.com
More informationSeries QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting
CATALOGUE > Release 8.7 > Series QP - QPR cylinders Series QP - QPR short-stroke cylinders Series QP: single and double-acting, magnetic Series QPR: double-acting magnetic, non-rotating ø 2, 6, 20, 25,
More informationMicrobore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
More informationHundreds of types of fittings
Push-to-Connect Hundreds of types of fittings can be used with plastic and rubber tubing and hose. Our goal at NewAge Industries is to offer a good cross-section of fittings to efficiently connect our
More informationKOMATSU 30 Flare (Metric Threads)
KOMATSU 30 Flare (Metric Threads) KOMATSU (JIS 30 Flare Metric Thread) Connections / Identification JIS 30 Flare connections include series of inch (BSP) threads and metric threads. This section is dedicated
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationCable Glands & Accessories
Cable Glands & Accessories This catalog features ITC s extensive range of liquid-tight, strain relief cord connectors (cable glands) and accessories, including locknuts, sealing washers, plugs, etc. These
More informationFunction Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. Pressure Fittings. Other Function Fittings.
Function Fittings Flow Control Regulators Piloted Function Fittings Non-Return Valves Pressure Fittings Other Function Fittings Silencers Function Fittings 4-3 Function Fittings Flow Control Regulators
More informationPrestolok 2. Push-in fitting. Catalogue UK
Prestolok Push-in fitting Index Straight connectors male - SPT F3P - p. 6 male - SPP F4P - p. 6 male - metric F8P - p. 7 female - SPP G4P - p. 7 union HPK - p. 7 unequal union HPK - p. 7 90 elbows adjustable
More informationSingle and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
More informationMULTI-K TOP COAT MULTI-COUPLING MULTI COUPLING. Tailor-made according to customer s needs Compact, reliable and safe PATENT PENDING
MULTI-K MULTI-COUPLING TOP COAT 107 PATENT PENDING DN 10 to 19 Tailor-made according to customer s needs Compact, reliable and safe 250 bar General features: ARGUS multi-couplings, which consist of a fixed
More informationFerulok Flareless Bite Type Fittings
Flareless Bite Type Fittings Flareless SAE 080101 / Flareless Flareless SAE 080601 / Flareless Flareless SAE 080102 / NPTF Flareless SAE 080120 / SAE-ORB Flareless SAE 080103 / NPTF Flareless SAE 080221
More informationHIGH PRESSURE HYDRAULICS (Hose, Coupling, Pressure Gauges, Adaptors)
HIGH PRESSURE HYDRAULICS (Hose, Coupling, Pressure Gauges, Adaptors) HIGH PRESSURE THERMOPLASTIC HOSES As the specialist in the manufacturing of high pressure hoses, we are poised to achieve exceptional
More informationMagnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
More informationGE2 G 1/2 DN A B
GE2 +GE2 CARBON STEEL Type: ball valve GE 2 way Body: block Material: 1,0737 Ball seats: from DN4 up to DN25 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 500 Bar depending on valve size and seal s
More information83 series Brass compression fittings Ø 1/ nominal pipe size, NPT thread
83 series rass compression fittings Ø /8..., NPT thread For use in areas of vibration Pre-assembled units No special assembly tools or heat required an be remade without damage to tube Suitable for use
More informationLIQUIfit Push-In Fittings with Metal Adaptors
LIQUIfit Push-In Fittings with Metal Adaptors The LIQUIfit range now benefits from a range extension of metal adaptors designed for liquid transfer applications. These fittings ensure reliable and compact
More informationpatented standards SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE General Catalogue a n d ot h e r p e n di n g
SAFETY QUICK COUPLINGS EXPERTISE AT THE SERVICE OF SAFETY AND PERFORMANCE PREVO S1 couplings represent the latest generation of pneumatic connection mechanisms. They provide a fully safe response to the
More information3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
More informationDN 3/8" Male, free nut BSP 0 C + 90 C Max Pressure : 10 Bars Specifications : For flush tank
ISO 9001-2008 Size : Ends : Min Temperature : Max Temperature : DN 3/8" Male, free nut BSP 0 C + 90 C Max Pressure : 10 Bars Specifications : For flush tank Materials : Brass Page 1 sur 10 SPECIFICATIONS
More informationTECHNICAL CATALOGUE BALL VALVES: IDEAL
TECHNICAL CATALOGUE BALL VALVES: TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
More informationquality industry solutions
quality industry solutions JSG Industrial Systems HOSE, TUBE & CONNECTION FITTINGS CATALOGUE 2017 JSG INDUSTRIAL SYSTEMS Since its inception in 1968, JSG Industrial Systems has been a proud supplier of
More informationACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
More informationCOUPLINGS, VALVES AND TUBING DELTA FLUID PRODUCTS LIMITED
Wade COUPLINGS, VALVES AND TUBING DELTA FLUID PRODUCTS LIMITED DELTA FLUID PRODUCTS LTD Delta Fluid Products have been associated with the manufacturing of Valves and Fittings for Fluid and Gases for over
More informationSWING JOINT & HEAVY TURF
PRICE GROUP DESCRIPTION 11 SWING JOINT 08 HEAVY TURF DISCOUNT MULTIPLIER PRODUCTS SWING JOINT & HEAVY TURF IRRIGATION FITTINGS INCLUDES: PVC SWING JOINTS AND IRRIGATION ACCESSORIES LSJHT EFFECTIVE JULY
More information4200/4400 ONE-PIECE NON-SKIVE COUPLINGS
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules
More informationHIGH PRESSURE - pumps
Gear pumps TRAE Positive displacement, external gear pumps intended for hydraulic systems of machines and devices. Material Housing Aluminium Mounting plate Aluminium (groups 1 and 2), cast iron (group
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More information2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
More informationARB AIR LOCKER Air Operated Locking Differentials
170102 Bulkhead Fitting Kit, 5mm to 3/16 Specs: 02 1 OUTER COMPRESSION NUT (5mm) 170602 Internal Tube Size 3/16 05 1 CNTRL COMPRESSION NUT (5mm to 3/16 ) 170604 07 1 FERRULE (3/16 ) 170606 3 08 1 INNER
More informationENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with Compact KNS Head
ENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with Compact KNS Head Pt100 probe with compact KNS terminal head Class B, 4 wire connection Various probe available lengths
More informationValve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.
More informationTHOMAFLUID - Handbook IV
Reichelt Chemietechnik GmbH + Co. - Handbook IV lndustrial Connectors of Metal Tubing Squeeze Connections of Metal for Pneumatics Quick-Disconnect Couplings of Plastics and Metal Cocks and Valves of Plastics
More information3 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO
Flow Control Valves NPTF NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO Swivel Design: Meter-Out, Meter-In
More informationTube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications
Self-align Fittings Series H, D,, Flared ridge ferrule Prevents accidental loss of ferrule when inserting tubing into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening
More informationPIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
More information