Ball Valves George Fischer Type 353, 354, 355 COLORO Ball Valves. Technical Features
|
|
- Mariah Hopkins
- 5 years ago
- Views:
Transcription
1 Ball Valves George Fischer Type 5, 54, 55 COLORO Ball Valves The George Fischer Type 5, 54, and 55 plastic ball valves feature: monobloc structure provides high safety level: user cannot dissassemble or adjust compact and space saving low torque General The George Fischer Type 5, 54, and 55 COLORO ball valves are ideal for most industrial applications. The hightech design, with monobloc structure provides a high level of safety user cannot disassemble or adjust. two piece body, permanently fused around an integral ball and stem eliminates stem blowout and ball position backlash. utomated manufacturing with integrated quality control offers uniform performance and low torque. Rugged PVC construction. Piping stress transmitted through integral body, not end connectors or ball. Technical Features Sizes /" to ", NPT threaded or solvent cement socket Pressure rating: psi socket, 50 psi threaded Valve position indication visible, with or without lever handle Ideal sealing materials: ball seat from PTFE; stem, and seat backing O-rings from EPM or FPM Ball seat backing O-rings compensate for seal wear; no readjustment necessary; uniform, low torque. Short overall length Short laying length Low profile Few component parts EPM or FPM Seals (except Type 54) low cost Safety The ball position is also visible on the shaft when the handle is withdrawn Compact body. Ball and shaft in one piece. Ball seal 4. Backing seal 5. Union end seal. Shaft seal Closed position Open position 0.7
2 H imensions and for Type 5 Compact Ball Valve PVC with STM solvent cement socket psi/ bar Inch wt. H L Z EPM FPM lbs. Z Z L (threaded) L (socket) Z socket laying length Z threaded laying length / / / / PVC with NPT threads 50 psi/0 bar Inch wt. H L Z EPM FPM lbs. / / / / H imensions and for Type 54 Single Union Ball Valve PVC with STM solvent cement socket psi/ bar Inch wt. H L Z EPM FPM* lbs. Z Z / 54 4 N/ / N/ N/ / N/ / 54 4 N/ N/ L (threaded) L (socket) PVC with NPT threads 50 psi/0 bar Inch wt. H L Z EPM FPM * lbs. / 54 N/ /4 54 N/ N/ / N/ / 54 N/ N/ *500 pc. minimum order required 0.74
3 imensions and for Type 55 True Union Ball Valve Ball Valves H Z PVC with STM solvent cement socket psi/ bar Inch wt. H L Z EPM FPM lbs. / / / / Z socket laying length Z threaded laying length Z L PVC with NPT threads 50 psi/0 bar Inch wt. H L Z EPM FPM lbs. / / / / Valve Ends and Nuts-PVC Fits type 54, 55 Ball Valves and 4 iaphragm Valves Inch STM socket NPT thread Metric socket Metric Nuts Part number Part number Part number / / / / Component Parts for Valve Body Inch O-Rings EPM O-Rings FPM Size/ash # / (.5x8) / / /
4 imensions and for Type 5 Compact Ball Valve Polypropylene with metric fusion socket ends 50 psi/0 bar, black handle d N wt. H L z Closest EPM lbs / / / / Minimum order quantites required; consult factory for details H z L Component Parts for Type 5 Polypropylene daptor socket, PP Rp (British Std. pipe threads) daptor nipple, PP NPT (male threads) d-rp / 0 /" /4" " /4" /" " daptor nipple, PP NPT (female threads) d-npt / 0 /" /4" " /4" /" " d-npt / 0 /" /4" " /4" /" " Hoze nozzle, PP d daptor nipple, PP (male BSP threads) d-r / 0 /" /4" " /4" /" "
5 imensions and for Type 55 True Union Ball Valve Ball Valves Polypropylene with metric fusion socket ends 50 psi/0 bar, black handle d N wt. H L L z Inch EPM lbs. d L z L H / / / / Minimum order quantites required; consult factory for details Polypropylene with IR/butt fusion ends 50 psi/0 bar, black handle d N wt. H Lz L Inch EPM lbs. d H / / / / Minimum order quantites required; consult factory for details L Lz Valve body (without handle) Polypropylene EPM/PTFE incl. union end seal d N Inch O-Rings EPM d N ash # / / / / (.5x8) Component parts for valve body Union nuts PP glass-fiber reinforced Union ends PP socket fusion ISO/IN Union ends spigot PP for IR/butt fusion
6 : Compact ball valve Types 5 and 55 Ball Valves Colored handles for greater safety and clear identification Green handle Ball valve / / / / Red handle Ball valve / / / / Many system operators require clear identification of the individual pipelines. With the compact ball valve modular system we offer a choice of 7 colors for clear and unmistakable identification. The ball valves can also be retrofitted with these colored handles. The standard handles supplied with the valve cannot be returned. : Yellow handle Ball valve / / / / Closed position Blue handle Ball valve / / / / White handle Ball valve / / / / Open position Safety The ball position is still visible on the shaft when the handle is withdrawn. Black handle Ball valve / / / / Orange handle Ball valve / / / /
7 Product Specification for Type 5 Compact Ball Valve - PVC The PVC compact ball valve, Type 5, /" through ", shall have either solvent socket or NPT threaded pipe connections. The valve shall have a two-piece body, permanently fused around the integral ball and stem. The valve shall have low, uniform torque to complement factory preadjusted performance specifications. Construction prevents user ability to disassemble or adjust. The stem shall indicate valve position if handle is removed. Handles are available in five colors for color-coding capabilities of handling different fluids. Material shall meet or exceed the requirements of 454-B according to the classifications and requirements of STM 784. Socket end connection dimensions shall conform to STM 47. Threaded pipe connections shall be in accordance with STM 44 which references NSI B.0. (was B.) for tapered pipe threads. The valve, Type 5, shall have PTFE ball seats with EPM or FPM seals. The valve with solvent cement socket ends shall carry a pressure rating of psi at 7 F. Valve with threaded ends, 50 psi at 7 F. as supplied by George Fischer, Inc., Tustin, C Product Specification for Type 54 Single Union Coloro Ball Valve - PVC The PVC Coloro ball valve, Type 54, / " through ", shall have either solvent socket or NPT threaded pipe connections with a single, true union end. The valve shall have a two-piece body, permanently fused around the integral ball and stem. The valve shall have low, uniform torque to complement factory preadjusted performance specifications. Construction prevents user ability to disassemble or adjust. The stem shall indicate valve position if handle is removed. Handles are available in five colors for color-coding capabilities of handling different fluids. Material shall meet or exceed the requirements of 454-B according to the classifications and requirements of STM 784. Socket end connections are suitable for IPS pipe. Threaded pipe connections shall be in accordance with STM 44 which references NSI B.0. (was B.) for tapered pipe threads. The valve, Type 54, shall have PTFE ball seats with EPM or FPM seals. The valve with solvent cement socket ends shall carry a pressure rating of psi at 7 F. Valve with threaded ends, 50 psi at 7 F. as supplied by George Fischer, Inc., Tustin, C Product Specification for Type 55 True Union Coloro Ball Valve - PVC The PVC Coloro ball valve, Type 55, / " through ", shall have either solvent socket or NPT threaded pipe connections with double true union ends. The valve shall have a two-piece body, permanently fused around the integral ball and stem. The valve shall have low, uniform torque to complement factory preadjusted performance specifications. Construction prevents user ability to disassemble or adjust. The stem shall indicate valve position if handle is removed. Handles are available in five colors for color-coding capabilities of handling different fluids. Material shall meet or exceed the requirements of 454-B according to the classifications and requirements of STM 784. Socket end connections are suitable for IPS pipe. Threaded pipe connections shall be in accordance with STM 44 which references NSI B.0. (was B.) for tapered pipe threads. The valve, Type 54, shall have PTFE ball seats with EPM or FPM seals. The valve with solvent cement socket ends shall carry a pressure rating of psi at 7 F. Valve with threaded ends, 50 psi at 7 F. as supplied by George Fischer, Inc., Tustin, C
8 Technical ata for Ball Valves Pressure/Temperature iagrams Ball Valves ll pressures are given in atmospheric excess pressure values. mbient temperature max. F/50 C. Safety factors for selected Thermoplastics Based on a 50 year operating life at 8 F/0 C with water Material Safety factor PVC.5 CPVC.75 PVF PP. Pressure in bar Temperature F , 54, 55 socket PVC; 4, 0 socket PVC & 7.5 CPVC; 4, 0 fusion socket PVF, manual 4 valves only PVC ll other manual and actuated ball valves CPVC CPVC PP PVF Temperature C Pressure in psi Bolt tightening torque values for flanged joints Type 4 Inch / /4 /4 / Type 70 Inch / 4 in-lbs in-lbs. 54 Torque for all ball valve types -pound Torque /8 & / /4 /4 / / 4 / d 80 Nm Torque 0 0.5
9 Flow Characteristics for Ball Valves Types 4, 4, 50, 5, 54, 55, 70, 50 Flow factor kv/cv 00 % % % open for Vertical -way Ball Balve (L-port) Type 4 (see type 4 vertical and horizontal for additional flow charts) Flow factor kv/cv 00 % % % open for Metering Ball Valve Type Flow factor kv/cv 00 % % % open 0.
10 Pressure Loss Characteristics Ball Valves Cv/kv Values Inch Cv kv d / 4.0 / / / / / / bar 4.5 psi 5 psi gal.785 liters for Ball Valves Types 4, 4, 5, 54, 55, 70, 50 Pressure Loss p (bar) /8" / d / N 0 /" / d 0 / N 5 /4" / d 5 / N 0 " / d / N 5 -/4" / d 40 / N -/" / d 50 / N 40 Flow Rate (l/min) " / d / N 50 -/" / d 75 / N 5 " / d 90 / N 80 4" / d 0 / N 00 " / d 0 / N 50 Fluid: Water 8 F/0 C 0 Pressure Loss p (psi) 0 - /8" / d / N 0 /" / d 0 / N 5 " / d / N 5 /4" / d 5 / N 0 -/4" / d 40 / N " / d / N 50 -/" / d 50 / N 40 Fluid: Water 8 F/0 C Flow Rate (gal/min) Cv/kv Values Inch Cv kv d for -way Ball Valve Type 4 (Vertical, L-port Ball) / 8"-" / / / / / bar 4.5 psi 5 psi gal.785 liters Pressure Loss p (bar) /8" / d / N 0 /4" / d 5 / N 0 /" / d 0 / N 5 " / d / N 5 -/4" / d 40 / N Flow Rate (l/min) " / d / N 50 -/" / d 50 / N 40 Fluid: Water 8 F/0 C 0.7
11 Cv/kv Values Inch Cv kv for -way Ball Valve Type 4 (Vertical, L-port Ball) / "-4".E+00 / E-0 4" & " " -/" Pressure loss p [bar].e-0.e-0 Medium: water 8 F/0 C.E-04.E+0.E+0.E+0.E+04 Flow rate [l/min] Cv/kv Values for Metering Ball Valve Type Inch Cv kv d / 8.77 / bar 4.5 psi 5 psi gal.785 liters Pressure Loss p (bar) /8" / d / N 0 /" / d 0 / N 5 Fluid: Water 8 F/0 C Flow Rate (l/min) Q Cv p to determine flow rate at higher p's. /" metering ball valve /8" metering ball valve Flow Rate (gal/min) P 7 psi P 8 psi P 9 psi P.5 psi Flow Rate (gal/min) P 57 psi.. P 7 psi P psi P P 57 psi P 7 psi P psi ngle of Opening ngle of Opening 0.8
Type 543. Three-way Ball Valve
Three-way Ball Valve Type 543 General Size: ⅜ 2 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged,
More informationDistributed By Aetna Plastics Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General Size: ½ 2 Material: PVC, CP
Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM,
More informationmanual valves inch sizes
Spears True Union 2000 Industrial Vented Ball Valve Description: In-line double union ball valve Maximum Fluid Pressure at 20 C: All sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 4-10 bar; all sizes flanged
More informationGF Piping Systems Datasheet Ball Valves
Type 546 Ball Valve PROGEF Stanar With butt fusion spigots IR-Plus oel: aterial: PP- esigne for easy installation an removal Ball seals PTFE Integrate stainless steel mounting inserts z-imension, valve
More informationType 561/562 Cone Check Valve
Type 561/562 Cone Check Valve Standard Features Size 3/8 4 Material Body: PVC, CPVC, PROGEF Standard, Polypropylene, SYGEF PVDF, ABS Spring (562 only): Stainless Steel Optional: Nimonic C/Hastelloy C,
More informationType Electrically Actuated Ball Valve
GF Piping Systems Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement
More informationType 514, 515, 517, 519
Diaphragm Valve Type 514, 5, 517, 519 General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM, NBR, PTFE/EPDM, PTFE/FPM,
More informationType Electrically Actuated Ball Valve
Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement socket, threaded,
More informationpvc-c manual valves inch sizes manual valves inch sizes Spears True Union 2000 Industrial Ball Valve
pvc-c Spears True Union 2000 Industrial Ball Valve Description: In-line double union ball valve with lockable handle Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 6-10 bar All
More informationType 375. True Union Ball Valve
True Union Ball Valve Type 3 General Size: ⅜ 4 Material: PVC, CORZAN CPVC, or PPn Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged, PPro-Seal electrofusion socket
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationLab Specialty Products Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS
Lab Specialty Products Technical Information TECHNICL INFORMTION WEIGHTS & DIMENSIONS Contact Spears for any Information not found. Page 569 Lab Ball s Sample Engineering Specification ll thermoplastic
More informationSection 5. SYGEF Standard PVDF Piping System. Effective Jan. 16, See for updated info. P
Section 5 SYGEF Stanar PVF Piping System P0801084 Effective Jan. 16, 2012. See www.gfpiping.com for upate info. SYGEF Stanar Prouct Specification Material Color ensity Surface tension inear expansion coefficient
More informationLock it in with IPEX DK Series Dialock. Diaphragm Valves. IPEX DK Series Dialock Diaphragm Valve VALVE AVAILABILITY
IPEX DK Series Dialock Diaphragm Valve Lock it in with IPEX DK Series Dialock Diaphragm Valves IPEX is pleased to introduce our new DK Series Dialock Diaphragm Valves, available in manual and pneumatically
More informationRotameters Rotameters
Rotameters Type 807 Rotameter - Polyamie omplete Assembly PV Socket Ens, EPDM Seals, Stanar Tube Stanar Float 98 807 622 ^ 98 807 60 ^ 0.22-2.20 98 807 62 ^ 98 807 6 ^ 0.44-4.40 2 98 807 624 ^ 98 807 62
More informationpvc-u section guide application guide standards and approvals
pvc-u Unplasticised Polyvinyl Chloride (PVC-U) is the most widely used of all plastics used for pipe installations. It is rigid, versatile, and is suitable for both above or below ground installations.
More informationDiaphragm Valves. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS 1117 Progressive Products from Spears Innovation and Technology
Features, & This full-featured valve is engineered to provide accurate throttling control and shutoff for industrial, chemical and water treatment applications. Weir-type design eliminates entrapped fluids
More information+GF+ PNEUMATIC ACTUATED BALL VALVE +GF+ PNEUMATIC ACTUATED BALL VALVE +GF+ PNEUMATIC ACTUATED BALL VALVE 3-16
+GF+ PNEUMATIC ACTUATED BALL VALVE Type 21/2 2-way True Union Pneumatically actuated ball valve for aggressive fluids and industrial applications. Based on the new Type 546 ball valve, the Type 21-2 uses
More information485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
More informationCATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.
CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional
More informationGeorge Fischer Pneumatically Actuated Diaphragm Valve DIASTAR Type 025/028
George Fischer Pneumatically Actuated Diaphragm Valve DIASTAR Type /8 Diaphragm Valves - Pneumatic º All-plastic actuator made of PP-GF º Compact design º Lightweight º Comprehensive line of accessories
More informationGF Piping Systems Datasheet Ball Valves
atasheet Type 546 Ball Valve Stanar PVF With butt fusion spigots metric oel: aterial: PVF esigne for easy installation an removal Integrate stainless steel mounting inserts -imension, valve en an union
More informationDiaphragm valve MV 309
Diaphragm valve MV 309 Nominal size DN 15 32 Nominal size 1/2 1 1/4 Pressure PN 6 bar Features pneumatic diaphragm valve DN 15 32 compact piston drive for medium pressure up to 6 bar (PTFE diaphragms)
More informationPNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
More informationFilters & Strainers Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS
Filters & Strainers Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS Contact Spears for any Information not found. Made in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for
More informationPipe Nipples / Solvent Cement / Pipe Clips 11. Diaphragm Valves / Knife Gate Valves 21
TABLE OF CONTENTS Pipe Sizing 1 Pipe 2 Tee s 3 Elbows 4 Couplings 5 Adaptors, Caps & Plugs 6 Unions 7 Reducer Bushing 8 Wye s / Clamp on Saddles 9 Flanges 10 Pipe Nipples / Solvent Cement / Pipe Clips
More informationRotameters. Variable Area Flow Meters
Variable Area Flow Meters Rotameters General Size: ⅜ 2½ Total Flow Range:. 264 gpm Tube Material: PA, PSU, PVC transparent Seal: EPDM, FPM Float: PVDF, PVDF-HP transparent En Connection: Solvent cement
More informationTBH Series True Union Ball Valve Product Guide
17 Q U A L I T Y S E R V I C E I N T E G R I T Y F LOW C O N T R O L TBH Series True Union Ball Valve Product Guide OVERVIEW A new generation of thermoplastic floating ball valves. The TBH Series features
More informationC 200 Modern Construction. Flexible Modular Design. Highest Safety.
Ball Valve Modern Construction. Flexible Modular Design. Highest Safety. The System At A Glance Ergonomic hand lever Position locking Safety Guard Double shaft seal with hand lever Intelligent interface
More informationBALL VALVE ACCESSORIES
True Union 2000 Retrofit Kits Easily converts any system over to all True Union 2000 style valves for consistent valve type and uniform maintenance. Special extended socket style End Connectors (2) allow
More informationDK Series Pneumatic Diaphragm Valves Product Data Sheet
1" through 2-1/2" 1/2" and 3/4" < STANDARDS > ASTM D1784 ASTM D1785 ASTM D4101 ASTM D3222 ASTM D2464 ASTM D2466 ASTM D2467 ASTM F441 ASTM F437 ASTM F439 ASTM F1498 IPEX DK Series are the ideal solution
More informationDK Series Dialock Manual Diaphragm Valves Product Data Sheet
< STANDARDS > ASTM D1784 ASTM D1785 ASTM D4101 ASTM D3222 ASTM D2464 ASTM D2467 ASTM D2466 ASTM F441 ASTM F437 ASTM F439 ASTM F1498 ISO 3609 ISO 10931 IPEX DK Series Dialock Diaphragm Valves are the ideal
More informationCorrosion Resistant and Ultra-Pure Rotameters for Accurate Measurement of Liquids and Gases
Corrosion Resistant and Ultra-Pure Rotameters for Accurate Measurement of Liquids and Gases Rotameters Markets/Applications George Fischer rotameters are ideally suited for a multitude of corrosive and
More informationModular valve block MVB 100/200
Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution
More informationGeorge Fischer Zero Static Valve Type 319 and 319-HTR
Diaphragm Valves George Fischer Zero Static Valve Type 39 and 39-HTR The Type 39 Zero Static Valve is ideally suited to eliminate dead legs in ultrapure water systems. Ergonomic, snap-on handwheel easy
More informationVT Series 3-Way Ball Valves Product Data Sheet. Valve Availability. Size Range: 1/2" through 2" EPDM or Viton (FPM)
Product Data Sheet < SANDARDS > introduction ASM D1784 ASM D4101-86 ASM D2466 ASM D2467 ASM D2464 ASM F1498 IPEX can be used for flow diverting, mixing, or on/off isolation. hey will replace a ee + 2 valve
More informationPressure relief valve DHV 718
Pressure relief valve DHV 78 Benefits diaphragm controlled pressure relief valve with piston guidance simple design, reliable function particularly suitable for oscillating pumps constant, frictionless
More informationDatasheet Pressure Reducing Valves V782/V82/V182
Datasheet Pressure Reducing Valves V78/V8/V8 Advantages - No auxiliary energy is required to operate the valve - Small standard tolerances due to the large control surface and the spiral spring - Can also
More informationPraher S4 Ball Valve. manual valves. Praher Type S4 Ball Valve. Materials. Size. Pressure Rating. Features. Connections.
Praher S4 Ball Valve Praher Type S4 Ball Valve Descripti: In-line double uni ball valve with lockable handle Mounting: In any positi Maximum Fluid Pressure at 20 C: s 16mm to 7mm - 10bar; s 90mm to 110mm
More informationPROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
More informationSB12 Series Back Pressure/Relief Valves
PF Published September 7, 4 SB Series Back Pressure/Relief Valves PP PVF SERIES: SB SIZES: 3/8 4 ENS: True Union Socket, Threaded or ChemFlare TM Spigot Bodies with Plain, Socket, Threaded or Flanged ends
More informationGeorg Fischer Type 131, 132, 133 Electrically Actuated Ball Valve
Georg Fischer Type 131, 132, 133 Electrically Actuated Ball Valve Standard Features Size 3/8-4 Voltage 24 AC or C 110-230 AC Emergency Manual Override Material PVC, CPVC, PROGEF Standard Polypropylene,
More informationintroduction VKD Series Automated Ball Valves Product Data Sheet < STANDARDS >
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2464 ASTM D2466 ASTM D2467 ASTM D4101 ASTM F1498 ASTM F437 ASTM F439 IPEX VKD Series Automated Ball Valves offer a variety of advanced features
More informationElectric Actuated 3-Way Ball Valves L-Port, PVC Body, Teflon/EPDM Seals 1/2 to 2 inch Pipe
Electric Actuated 3-Way Ball Valves L-Port, PVC Body, Teflon/EPDM Seals 1/2 to 2 inch Pipe SERIES Features Industrial grade PVC ball valve with PTFE/EPDM seals IP67 weatherproof polyamide enclosure with
More informationintroduction RV Series Sediment Strainers Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D4101-86 ASTM D2466 ASTM D2467 ASTM F439 ASTM D2464 ASTM F1498 ASTM F437 IPEX RV Sediment Strainers protect critical pipeline components by
More information2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in, N 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position indicator
More informationBYV Series Butterfly Valve Product Guide FLOW CONTROL
BYV Series Butterfly Valve Product Guide FLOW CONTROL 17 Q U A L I T Y S E R V I C E I N T E G R I T Y 1 OVERVIEW Engineered Hand Lever Design for Enhanced Strength and UV Performance Ergonomic Grip and
More informationType 21 True Union Ball Valves
PDF Published June 27, 218 Type 21 True Union Ball Valves The Chemline Type 21 True Union Ball valve incorporates state of the art features for long term performance. This is a full port, full blocking
More information2 way ball valve S4 with integrated Praher Labeling System
Praher Plastics Austria GmbH DB/EN/DEEN///33 Technische Änderungen vorbehalten! way ball valve S4 Symbol photo Safety locking handle system This document does not constitute a guarantee, it is for initial
More informationType 231, 232, 233 Pneumatically Actuated Ball Valve
Type 21, 22, 2 Pneumatically Actuated Ball Valve Standard Features Sie /8-4 Material PVC, CPVC, PROGEF Standard, Polypropylene, SYGEF PVF Connection Ends Socket, Flanged, Spigot (PVF and PP only), Threaded
More informationintroduction VR Piston Check Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2466 ASTM D2467 ASTM D2464 ASTM F1498 The IPEX VR Piston Check Valve is an ideal solution for process back-flow prevention. These valves feature
More informationGeorg Fischer Type 546 Ball Valve
Georg Fischer Type 546 Ball Valve Standard Features Size 3/8-4 aterial PVC, CPVC, PROGEF Standard Polypropylene, SYGEF PVF Available Socket Threaded Flanged Spigot (PVF and PP only) Seat PTFE Seals EP
More informationK-Factor. Global Installation Fittings and K-Factors. Global
K-Factor Global Installation Fittings an K-Factors Global K-Factor CD Table of Contents 5 6 7 8 13 14 21 22 27 28 35 36 37 38 39 40 47 48 49 50 51 52 59 60 61 62 63 64 65 66 67 68 79 80 81 82 83 84 91
More information2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50
/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5
More informationSIGNET Vortex Flow Sensors ENGLISH
DN X DN X DN X DN X DN X DN X DN X SIGNET Vortex Flow Sensors ENGLISH 37000.090 C12/00 English 1. Mounting Location... 1 2. Installation... 1 3. Wiring Preparation... 2 4. Wiring Options Frequency Output
More informationBall valve C 16. Nominal size DN Nominal size 2 6 Nominal pressure PN 6 10 bar.
Ball valve C 16 Nominal size DN 50 150 Nominal size 2 6 Nominal pressure PN 6 10 bar Features Special ball valve with fully encapsulated valve ball extremely low clearance volume high actuation reliability
More informationMaterial: Size: Pressure Rating: Seats: PTFE. Seals: Connections:
True Union Ball Vale w/ Locking anle aterial: : Pressure Rating: Seats: Seals: Connections: PVC, PP, PVF ½ - 2 (for 2½ to 4 see TBL Series) 230 psi ½ - 2 : PVC, PVF 150 psi ½ - 2 : PP PTF P or FP IPS Socket
More informationVXE Easyfit 2-way Ball Valve (DN15 - DN50)
The Durapipe Easyfit valve allows customers to brand or label the valve through specialist software that is provided with the product. This innovative technology means that companies can easily own-brand
More informationBall valve C 200 PROP / C 200 DOS
Ball valve C 00 PROP / C 00 DOS Additional options on request Silicone free www.asv-stuebbe.com/products/instrumentation PVC-U PP PVDF Nominal size DN 0 50 Nominal size /8 Nominal pressure PN 0 6 bar C
More informationCompact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe
Compact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe SERIES Features Industrial quality miniature actuator Industrial grade True Union ball valve Visual valve position indicator
More informationVXE Series Ball Valves Product Data Sheet
< STANDARDS > ASTM D1784 ASTM D2466 ASTM D2467 ASTM F439 ASTM D2464 ASTM F437 ASTM D1498 The IPEX EasyFit VXE Series True Union Ball Valves represent the latest innovation in thermoplastic ball valve manufacturing
More informationType 21 Ball Valves. features PTFE
PDF Published August 22, 217 Type 21 Ball Valves The Chemline Type 21 True Union Ball valve incorporates state of the art features for long term performance. This is a full port, full blocking True Union
More informationNAF-Triball ball valve
NAF-Triball ball valve DN 10-100 for max. 40bar Fk 25.622(12)GB 12.09 Primary characteristics NAF-Triball is a full bore ball valve designed for shut-off, on-off functions as well as control application
More informationBall Valve C 200. Stem PVC-U PVDF PP, fiberglass-reinforced. Ball PVC-U PP PVDF. Ball Seat PTFE. Application chemical and industrial plants
Ball Valve C 00 Benefits Highend industrial valve Flexible toolbox with a broad range of product varieties Reliable material combination for safe handling of critical media Newly designed ergonomic handle
More informationControl Valve, Plastic/Metal
Control Valve, Plastic/Metal Construction The GEMÜ 2/2-way control valve has a stainless steel piston actuator. ll metallic actuator components are made of stainless steel. It is available with a normally
More informationTKD Series 3-Way Ball Valves Product Data Sheet
Product Data Sheet < SANDARDS > ASM D1784 ASM D2466 ASM D2467 ASM D2464 ASM F1498 introduction IPEX KD Series 3-Way Ball Valves can be used for flow diverting, mixing, or on/off isolation. hey will replace
More informationTKD Series 3-Way Automated Ball Valves Product Data Sheet. Body Material: PVC Size Range: 1/2" through 2"
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2464 ASTM D2466 ASTM D2467 ASTM F1498 IPEX TKD Series 3-Way Automated Ball Valves can be used for flow diverting, mixing, or on/off isolation.
More informationBall Valve C 110. PVC-U PP PVDF - wafer flange socket end DIN-flange. Ball. Advantages. Ball seat. Application. Sealings. Utilisation.
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Ball Valve C 110 PVC-U PP PVDF - wafer flange
More informationTrue Union Ball Valve (BN) Product Category. Compact Ball. 2-pieces Compact Ball. Single Union Without Support. Ball Valve. True Union Without Support
Sekisui Industrial Piping Co., Ltd. located in the Chungkang Export Processing Zone of Taichung City in Taiwan. From March of 2006, Sekisui Industrial Piping Co., Ltd. was established as a wholly-owned
More informationVKD DualBlock 2-way Ball Valve
The VKD DualBlock ball valve is a fully unionised valve that stands up to the most severe industrial applications. Size range from /" / d6mm up to 2" / d6mm Pressure rating: Maximum working pressure: 6
More information3 way ball valve S4 hand operated
General: Symbolfoto Material: PVC-U / PP / PVDF Sealing material: EPDM / FPM Ball seating joint: PTFE Ball: T- oder L-Bohrung Dimensions: DN0 (DN5 / d6 / d/8 ) DN5 d0 d/ DN0 (DN5 / d5 / d/4 ) DN5 d d DN
More informationBall valve C 100 multi-part, high k v value, high stability
Ball valve C 00 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable and ball
More informationdisplay on the wall or in a panel away from the inline sensor SE30 for easy meter reading.
Analogue Flow Rate Indicator, DN 15...; PN 1...16 Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a large
More informationTKD dn PP-H. Dual Block 3-way ball valve
TKD dn 15 50 PP-H Dual Block 3-way ball valve TKD DN 15 50 FIP has developed a VKD DUAL BLOCK ball valve to introduce a high reference standard in thermosplastic valve design. TKD is a True Union diverting
More informationSection 2. Pipe, Valves and Fittings Sizes ¼" to 12" Schedule 80 CPVC Piping System. Serviced by GF Little Rock
Section 2 Schedule 80 CPVC Piping System Pipe, Valves and Fittings Sizes ¼" to 12" Serviced by GF Little Rock Effective March 27, 2006 Glossary Std. Pack = Standard Carton Quantity FP = Female Pipe hread
More informationi butt weld spigot i flanged end acc. to DIN PN 10 / 16
body material PVC-U PVC-C PP PVDF ball seat PTFE other seats iepdm ifpm i *) working temperature 0 C to 50 C 0 C to 90 C -20 C to 80 C nominal size DN to DN connection with pipe legth acc. to EN 558-1
More informationMotorized CEPEX EXTREME Ball Valve
AVA Electric Actuator Overview The AVA electric actuator range is instantly recognisable with its orange and gray compact housing, and LED screen. This small sized actuator is feature rich and allows users
More information410, 417, 423. Butterfly valve, Plastic
Butterfly valve, Plastic Construction GEMÜ 410, 417 and 423 are centric butterfly valves in nominal sizes N 15-50. The valve body is made of PVC-U, the butterfly disc is made of PVF or PP. The available
More informationVKD DN PP-H. DUAL BLOCK 2-way ball valve
VKD DN 65 100 PP-H DUAL BLOCK 2-way ball valve VKD DN 65 100 FIP has developed a VKD DUAL BLOCK ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball
More informationintroduction TKD Series 3-Way Automated Ball Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2464 ASTM D2466 ASTM D2467 ASTM F1498 ASTM F437 ASTM F439 IPEX TKD Series 3-Way Automated Ball Valves can be used for flow diverting, mixing,
More informationVR Piston Check Valves Submittal Data Sheet. Job or Customer: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: introduction
Submittal Data Sheet Job or Customer: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: Date Date Date introduction < STANDARDS > The IPEX VR Piston Check Valve is an ideal solution
More informationGEMÜ 717 Manually operated ball valve
Manually operated ball valve Features igh flow rates Low weight Choice of various body materials and connection types vailable as shut off or control valve / and /way versions available Description The
More informationDK/CP DN PVC-U / PVC-C / PP-H / PVDF. Pneumatically actuated 2-way diaphragm valve
PVC-U / PVC-C / PP-H / PVDF Pneumatically actuated 2-way diaphragm valve DK/CP DN 15 32 The new DK/CP diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids.
More informationKEY FEATURES. Product Overview. Product Line Drawing
Main Valves Options Model 106-C 106-PG-C Globe KEY FETURES Solves high pressure drop problems Controls variable flows & vibration Significantly reduces noise Self-contained actuators not required Customizable
More informationPressure Reducing Valve V782
Pressure Reducing Valve V General Function The V Pressure Reducing Valve reduces the pressure within the system to a pre-set value. By using the differential pressure, the pressure reducing valve adjusts
More informationProduct Range. Butterfly Valve Type
Prouct Range Butterfly Valve Type 567 ist of Abbreviations ANSI American National Stanar Institute ASTM American Society for Testing an Materials BS British Stanar IN eutsche Inustrie-Normen ISO International
More informationDiaphragm Valve MV 309
Diaphragm Valve MV 309 Benefits compact designed pneumtically operated valve standard with visual position indicator common installation length air connections acc. to NAMUR Application chemical and industrial
More informationSignet 7000/7001 Vortex Flow Sensors * *
DN X DN X DN X DN X DN X DN X DN X Signet 7000/7001 Vortex Flow Sensors *3-7000.090* 3-7000.090 Rev. F 10/05 English English 1. Mounting Location... 1 2. Installation... 1 3. Wiring Preparation... 2 4.
More informationintroduction VM Series Manual Diaphragm Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D4101-86 ASTM D3222 ASTM D2467 ASTM D2466 ASTM D1785 ASTM D1784 ASTM F441 ASTM F439 IPEX VM Series Diaphragm Valves are the ideal solution f modulating
More informationASV sturdy and robust construction. DN 10 up to DN bar (PN 10) at 20 C. DMV 755: 1,0-9,0 bar DMV 765: 0,5-9,0 bar
Pressure Reucing Valve Type DMV Type DMV Print-No. / Design Size Max. Pressure Setting Range Pressure Setting Working Pressure Back lash Operating Security Maintenance Simple inline pipe connection ASV
More informationDIGIFLO ELECTRONIC FLOWMETER
DIGIFLO ELECTRONIC FLOWMETER PIPE FITTING INSTALLATION MANUAL SADDLE MACHINED IN-LINE BODY MOLDED IN-LINE BODY MOLDED TEE Blue-White R Industries, Ltd. F-2000 Page 2 1.0 Temperature vs. Pressure Temperature
More information736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR VALVE FEATURES The 736 XS-746 XS is a 3 pieces full bore ball valve for industrial fluids, especially made to be easily actuated and to offer a good and long
More informationSolution Partner. Leak - Proof. Flow & Control. Ball Valves SBV10 SBV30 SBV60 SFBV60. W e. s u p p o r t. t h e
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof The Best Partner Flow & Control Solution Partner for Value Creation Ball Valves SBV SBV30 SBV60 SFBV60 SBVSeries For
More information2 way ball valve S4 with pneumatic actuator
General: Material: Sealing material: Ball seating joint: Dimensions: PVC-U / PP / PVDF EPDM / FPM PTFE DN0 DN80 d6 d0 3/8 4 symbol photo PVC Solvent socket Solvent spigot Threaded socket Fixed flange Backing
More informationintroduction VM Series Pneumatic Diaphragm Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D4101-86 ASTM D3222 ASTM D2467 ASTM D2466 ASTM D1785 ASTM D1784 ASTM F441 ASTM F439 IPEX VM Series Diaphragm Valves are the ideal solution f modulating
More informationFlowmeter DFM
Flowmeter DFM 165 50 Nominal size DN 10-65 Nominal size /8 2 1/2 Nominal pressure PN 10 bar Features Measuring range to 50,000 l/h suitable for a wide range of applications for gaseous medium types, water,
More informationNAF-Triball ball valve DN for max. 40bar. Fk (9)GB 03.03
NAF-Triball ball valve - 0 for max. bar Fk.6(9)GB 03.03 Primary characteristics NAF-Triball is a full bore ball valve designed for shut-off, on-off functions as well as control application for the metal
More informationTel: (866) Fax: (866) Tel: (281) Fax: (281)
sales@novatech-usa.com www.novatech-usa.com Tel: () 4- Fax: () 4-4 Tel: () 9- Fax: () 9-004 Series The S & S metering pumps offer a high level of reliability with outstanding value for applications up
More informationHayward Flow Control
New GFPP PMD4/PMS4 Series Pneumatic Actuators Hayward Flow Control Actuation and Controls Price List Effective July 22, 2013 Hayward Flow Control A Division of Hayward Industries, Inc. One Hayward Industrial
More information