83 series Brass compression fittings
|
|
- Brendan Marsh
- 5 years ago
- Views:
Transcription
1 > > Port size: Ø /8... 2, SPP and SPT thread > > For use in areas of vibration > > Pre-assembled units > > No special assembly tools or heat required > > an be remade without damage to tube Technical features Medium: ompressed air, water (plus other media suitable for use with materials of construction). Operating pressure: Typically up to 28 psi (5 bar) For applications above 28 psi (5 bar) bar contact Norgren technical service Ambient temperature: ( F) with HNR O -ring (yellow) > > Suitable for use on seam welded as well as seamless tube or pipe > > Thinner tube can be used; as thin as 0,03 (0,8 mm) wall thickness > > Lower torque requirement on the tube nut than fittings which bite into the tube > > Will cope with tube misalignment of ±4 Tube sizes ( see page 2 for corresponding tube outside diameter): /8, /4, 3/8, /2, 3/4,, /4, /2, 2 Thread sizes: /8, /4, 3/8, /2, 3/4,, /2 Tubing: Designed for use with: opper tube to S 287 Nylon PA2 (tube support required) stainless steel tube to AISI 304 and AISI 36 Testing & Approvals: PD 97/23/ Shock & vibration tested to N 6373 ategory 2 (ogie mounted) Salt spray tested to ISO , data on request N (+302 F) -45 (-49 F) Materials: ody & nut: brass Washer & clampring: brass O -Ring: HNR colour coded yellow Technical data Recommended nut torque settings Tube Ø Recommended torque Tube Ø /8 20 Nm 50 Nm /4 30 Nm /4 300 Nm 3/8 40 Nm /2 30 Nm /2 45 Nm Nm 3/4 90 Nm Recommended torque Torque settings based on Railway applications up to 5 bar for use with stainless steel tube H Tube stop position and tube outside diameter details Nominal Pipe O/D Pipe O/D H /8 0,405 0,3 ± 0, 8 /4 0,540 3,7 ± 0,2 8,5 3/8 0,675 7, ± 0,3 20 /2 0,840 2,3 ± 0,6 20 3/4,050 26,7 ± 0,2 2,5,35 33,4 ± 0,3 22,5 /4,660 42,2 ± 0,3 27 /2,900 48,3 ± 0, ,375 60,3 ± 0,3 35 The information provided in this table are typical values as dimension H will vary slightly with torque applied to the nut. For fittings without tube stops such as straight connector and bulkheads the above tube insertion depths are also applicable Option selector 83 Thread type Shape Add V = optional FKM high temperature O -ring. Thread size/ Pipe size without notice, the specifications given in this document. ( c) 205 Norgren Ltd. 5/5 RW/en
2 Method of assembly A A nsure that the end of the tube is cut square and is free from burrs. 2. Slide the nut (2) onto the pipe () from right to left. Slide the split ring (3) onto the pipe () from right to left keeping the smaller edge towards the nut (2). Slide the washer (4) onto the pipe () from right to left. Slide the O -ring (5) onto the pipe () from right to left. N.. The pipe head must be deburred to ensure the O -ring is not damaged. 3. efore installing the pipe fittings, check that the pipes misalignement is not higher than ± 4 4. Move the pipe head (A) with all components asembled as shown towards the casing abutment (). In pipe fitings without abutment (), the pipe should be inserted as per the tube stop/abutment position listed below. 5. Move the four components from left to right and screw the nut (2) onto the pipe fitting casing (6). Straight adaptors and connectors Straight adaptor (taper) 8325 Straight adaptor (parallel) Female adaptor (parallel) Straight union (equal) Straight union (unequal) ulkhead union ap 8302 Straight stem connector (taper) 835 Straight stem connector (parallel) 8325 Page 3 Page 3 Page 4 Page 4 Page 5 Page 5 Page 5 Page 6 Page 6 lbow connectors and adaptors Tee connectors and adaptors Union elbow (equal) Union elbow (unequal) lbow adaptor (taper) lbow adaptor female (taper) Union tee (equal) Union tee (unequal) Tee adaptor (taper) 8365 Tee adaptor female (taper) Page 7 Page 7 Page 8 Page 8 Page 9 Page 9 Page 0 Page 0 Accessories Tubing nut 830F4 Split ring 830J Tubing washer 8307 Tubing O -ring 8000K Thread O -ring ISO parallel thread 8000K Page Page Page Page Page RW/en without notice, the specifications given in this document. ( c) 205 Norgren Ltd. 5/5
3 Straight adaptor (taper) 8325 Straight adaptor (parallel) /8" 0,3 R /8 34, /8" 0,3 R /4 36, /8" 0,3 R 3/8 36, /8" 0,3 R /2 37, /4" 3,7 R /8 37, /4" 3,7 R /4 38, /4" 3,7 R 3/8 38, /4" 3,7 R /2 39, /4" 3,7 R 3/4 4, /4" 3,7 R 44, /8" 7, R / /8" 7, R 3/ /8" 7, R / /8" 7, R 3/ /8" 7, R /2" 2,3 R /4 40, /2" 2,3 R 3/8 40, /2" 2,3 R /2 4, /2" 2,3 R 3/4 43, /2" 2,3 R 46, /4" 26,7 R 3/ /4" 26,7 R / /4" 26,7 R 3/ /4" 26,7 R /4" 26,7 R / A8 " 33,4 R /2 47, " 33,4 R 3/4 49, " 33,4 R 52, " 33,4 R /4 52, A8 " 33,4 R /2 54, /4" 42,2 R 3/4 49, /4" 42,2 R 52, /4" 42,2 R /4 52, A8 /4" 42,2 R / /4" 42,2 R 2 6, /2" 48,3 R 54, /2" 48,3 R /4 54, A8 /2" 48,3 R /2 56, /2" 48,3 R 2 6, " 60,3 R /4 59, A8 2" 60,3 R /2 6, " 60,3 R 2 6, /8" 0,3 /8 30, /8" 0,3 /4 33, /8" 0,3 3/8 34, /8" 0,3 /2 38, /4" 3,7 /8 33, /4" 3,7 /4 34, /4" 3,7 3/8 34, /4" 3,7 /2 38, /4" 3,7 3/4 44, /4" 3,7 46, /8" 7, /4 34, /8" 7, 3/ /8" 7, / /8" 7, 3/ /8" 7, /2" 2,3 /4 37, /2" 2,3 3/8 37, /2" 2,3 /2 39, /2" 2,3 3/4 44, /2" 2,3 45, /4" 26,7 / /4" 26,7 3/8 36, /4" 26,7 / /4" 26,7 3/ /4" 26, /4" 26,7 / A8 " 33,4 /2 43, " 33,4 3/4 49, " 33,4 49, " 33,4 /4 53, A8 " 33,4 / /4" 42,2 3/4 48, /4" 42,2 50, /4" 42,2 /4 5, A8 /4" 42,2 /2 5, /2" 48,3 5, /2" 48,3 /4 58, A8 /2" 48,3 /2 58, /2" 48,3 2 60, " 60,3 /4 62, A8 2" 60,3 /2 62, " 60,3 2 64, /5 without notice, the specifications given in this document. ( c) 205 Norgren Ltd. RW/en
4 Female adaptor (parallel) Straight union (equal) /8" 0,3 / /8" 0,3 / /8" 0,3 3/8 3 2, /8" 0,3 / /4" 3,7 /8 33, /4" 3,7 /4 33, /4" 3,7 3/8 33,5 2, /4" 3,7 /2 36, /4" 3,7 3/4 37, /4" 3,7 38, /8" 7, / /8" 7, 3/8 33,5 2, /8" 7, /2 34, /8" 7, 3/4 38, /8" 7, 39, /2" 2,3 / /2" 2,3 3/8 34 2, /2" 2,3 /2 35, /2" 2,3 3/4 39, /2" 2,3 42, /4" 26,7 / /4" 26,7 3/8 34 2, /4" 26,7 /2 34, /4" 26,7 3/ /4" 26, /4" 26,7 / A8 3/4" 26,7 / " 33,4 /2 38, " 33,4 3/4 4, " 33,4 43, " 33,4 /4 44, A8 " 33,4 /2 47, /4" 42,2 3/ /4" 42, /4" 42,2 / A8 /4" 42,2 / /4" 42, /2" 48,3 47, /2" 48,3 /4 47, A8 /2" 48,3 / /2" 48, " 60,3 /4 50, A8 2" 60,3 /2 52, " 60,3 2 53, /8" 0, /4" 3, /8" 7, /2" 2, /4" 26, " 33, /4" 42, /2" 48, " 60, RW/en without notice, the specifications given in this document. ( c) 205 Norgren Ltd. 5/5
5 Straight union (unequal) ap øa2 2 /4" 3,7 /8" 0, /8" 7, /8" 0,3 45, /8" 7, /4" 3,7 45, /2" 2,3 /4" 3, /2" 2,3 3/8" 7, 47, /4" 26,7 /4" 3,7 48, /4" 26,7 3/8" 7, /4" 26,7 /2" 2,3 50, " 33,4 3/8" 7, 54, " 33,4 /2" 2, " 33,4 3/4" 26,7 56, /4" 42,2 /2" 2, /4" 42,2 3/4" 26,7 55, /4" 42,2 " 33, /2" 48,3 " 33, /2" 48,3 /4" 42, " 60,3 " 33, " 60,3 /4" 42, " 60,3 /2" 48, /8" 0,3 24, /4" 3,7 24, /8" 7, /2" 2,3 26, /4" 26, " 33,4 33, /4" 42,2 34, /2" 48,3 36, " 60,3 4, ulkhead union L Ø L 2 /8" 0, , /4" 3, , /8" 7, /2" 2, , /4" 26, " 33, , /4" 42, , /2" 48, , " 60, , /5 without notice, the specifications given in this document. ( c) 205 Norgren Ltd. RW/en
6 Straight stem connector (taper) 835 Straight stem connector (parallel) 8325 /8" 0,3 R /8 34, /8" 0,3 R /4 36, /4" 3,7 R / /4" 3,7 R 3/ /4" 3,7 R / /8" 7, R 3/ /8" 7, R / /8" 7, R 3/ /2" 2,3 R 3/ /2" 2,3 R / /2" 2,3 R 3/ /2" 2,3 R /4" 26,7 R 3/ /4" 26,7 R / /4" 26,7 R 3/ /4" 26,7 R " 33,4 R / " 33,4 R 3/ " 33,4 R " 33,4 R / A8 " 33,4 R / /4" 42,2 R 56, /4" 42,2 R /4 56, A8 /4" 42,2 R /2 58, /4" 42,2 R 2 58, /2" 48,3 R 57, /2" 48,3 R /4 57, A8 /2" 48,3 R /2 59, /2" 48,3 R 2 59, " 60,3 R " 60,3 R / A8 2" 60,3 R / " 60,3 R /8" 0,3 /8 30, /8" 0,3 /4 33, /4" 3,7 / /4" 3,7 3/ /4" 3,7 / /8" 7, 3/ /8" 7, / /8" 7, 3/ /2" 2,3 3/ /2" 2,3 / /2" 2,3 3/ /2" 2, /4" 26,7 3/ /4" 26,7 / /4" 26,7 3/ /4" 26, " 33,4 / " 33,4 3/ " 33, " 33,4 / A8 " 33,4 / /4" 42,2 53, /4" 42,2 /4 57, A8 /4" 42,2 /2 60, /4" 42,2 2 64, /2" 48,3 54, /2" 48,3 /4 6, A8 /2" 48,3 /2 6, /2" 48,3 2 65, " 60, " 60,3 / A8 2" 60,3 / " 60, RW/en without notice, the specifications given in this document. ( c) 205 Norgren Ltd. 5/5
7 Union elbow (equal) Union elbow (unequal) øa2 /8" 0, /4" 3,7 36, /8" 7, /2" 2, /4" 26,7 42, " 33,4 53, /4" 42, /2" 48, " 60,3 70, /4" 3,7 /8" 0,3 33,5 37, /8" 7, /8" 0, , /8" 7, /4" 3,7 38,5 29, /2" 23,3 /4" 3,7 39,5 38, /2" 23,3 3/8" 7, 40 37, /4" 26,7 /4" 3,7 42 4, /4" 26,7 3/8" 7, 4,5 4, /4" 26,7 /2" 23,3 40,5 43, " 33,4 /4" 3,7 47, " 33,4 3/8" 7, 48, " 33,4 /2" 23, , " 33,4 3/4" 26, /4" 42,2 3/4" 26, , /4" 42,2 " 33,4 57, /2" 48,3 " 33,4 62 6, /2" 48,3 /4" 42,2 60, " 60,3 /4" 42,2 66, " 60,3 /2" 48,3 68, /5 without notice, the specifications given in this document. ( c) 205 Norgren Ltd. RW/en
8 90 lbow adaptor (taper) lbow adaptor female (taper) /8" 0,3 R /8 32,5 22, /8" 0,3 R /4 3,5 25,5 3, /8" 0,3 R 3/8 32,5 25 3, /8" 0,3 R / /4" 3,7 R /8 35,5 25, /4" 3,7 R / , /4" 3,7 R 3/ , /4" 3,7 R /2 36, /4" 3,7 R 3/4 36, /4" 3,7 R 39,5 39,5 20, /8" 7, R / , /8" 7, R 3/ /8" 7, R /2 38, /8" 7, R 3/ /8" 7, R /2" 2,3 R / , /2" 2,3 R /4 39 3, /2" 2,3 R 3/ , /2" 2,3 R / , /2" 2,3 R 3/ , /2" 2,3 R , /4" 2,3 R /4 42, /4" 2,3 R 3/8 42,5 35 2, /4" 2,3 R /2 43,5 34,5 3, /4" 2,3 R 3/4 42,5 37 5, /4" 2,3 R 4, , /4" 2,3 R /4 4,5 4, A8 3/4" 2,3 R / " 33,4 R /2 52,5 42,5 3, " 33,4 R 3/4 5, " 33,4 R " 33,4 R /4 5,5 47,5 20, A8 " 33,4 R /2 5,5 5,5 22, /4" 42,2 R 3/ , /4" 42,2 R 56,5 52, /4" 42,2 R /4 56,5 5, A8 /4" 42,2 R /2 57,5 52, /4" 42,2 R , /2" 48,3 R 60,5 54, /2" 48,3 R /4 57,5 52,5 8, A8 /2" 48,3 R /2 6, /2" 48,3 R , " 60,3 R / A8 2" 60,3 R /2 69,5 58, " 60,3 R 2 70, ØA Ø K /8" 0,3 /8 3,5 29 7, /8" 0,3 /4 37, /8" 0,3 3/8 37,5 33 2, /8" 0,3 /2 37, /4" 3,7 / , /4" 3,7 / /4" 3,7 3/ ,5 2, /4" 3,7 / /4" 3,7 3/ , /8" 7, /4 38, /8" 7, 3/8 38,5 3,5 2, /8" 7, / , /8" 7, 3/4 39,5 39,5 5 36, /2" 2,3 /4 38,5 33, /2" 2,3 3/8 38,5 32,5 2, /2" 2,3 / , /2" 2,3 3/ ,5 5 36, /2" 2,3 42,5 43, /4" 26,7 3/8 42,5 35,5 2, /4" 26,7 / /4" 26,7 3/ , /4" 26, " 33,4 3/ , " 33,4 / " 33,4 3/ , " 33,4 5 50, " 33,4 / A8 " 33,4 /2 58,5 55, /4" 42, , /4" 42,2 /4 56,5 56, A8 /4" 42,2 / /2" 48, /2" 48,3 / A8 /2" 48,3 /2 6, /2" 48, " 60,3 / A8 2" 60,3 / , " 60, , øk RW/en without notice, the specifications given in this document. ( c) 205 Norgren Ltd. 5/5
9 Union tee (equal) Union tee (unequal) øa2 /8" 0, /4" 3, /8" 7, 75 37, /2" 2, /4" 26, " 33,4 03 5, /4" 42,2 5 57, /2" 48, " 60, /8" 0,3 /4" 3,7 67,5 36, /8" 0,3 3/8" 7, 67,5 39, /4" 3,7 3/8" 7, 70 38, /8" 7, /4" 3, /8" 7, /2" 2, , /2" 2,3 /4" 3,7 78,5 39, /2" 2,3 3/8" 7, 78 39, /2" 2,3 3/4" 26, /4" 26,7 /4" 3,7 85 4, /4" 26,7 3/8" 7, 85 4, /4" 26,7 /2" 2,3 84, " 33,4 3/8" 7, " 33,4 /2" 2, " 33,4 3/4" 26, /4" 42,2 3/4" 26, /4" 42,2 " 33, /2" 48,3 " 33,4 22 6, /2" 48,3 /4" 42, " 60,3 /4" 42, , " 60,3 /2" 48, , /5 without notice, the specifications given in this document. ( c) 205 Norgren Ltd. RW/en
10 Tee adaptor (taper) 8365 Tee adaptor female (taper) øk /8" 0,3 R / /4" 3,7 R / /4" 3,7 R /4 73,5 27, /4" 3,7 R 3/ /4" 3,7 R /2 7, /8" 7, R / /8" 7, R 3/ /8" 7, R / /2" 2,3 R / /2" 2,3 R 3/8 78,5 32, /2" 2,3 R /2 78, /2" 2,3 R 3/ /4" 26,7 R / , /4" 26,7 R 3/4 84, /4" 26,7 R 85 33, " 33,4 R / " 33,4 R 3/ " 33,4 R 02, " 33,4 R / A8 /4" 42,2 R 3,5 49, /4" 42,2 R / A8 /4" 42,2 R / /2" 48,3 R /2" 48,3 R / A8 /2" 48,3 R /2 23 5, /2" 48,3 R " 60,3 R / A8 2" 60,3 R / " 60,3 R Ø K /8" 0,3 /8 66,5 29,5 7, /4" 3,7 / , /4" 3,7 /4 70,5 27, /4" 3,7 3/ , /4" 3,7 /2 78, /8" 7, / /8" 7, 3/ , /8" 7, /2 80,5 30, /2" 2,3 / /2" 2,3 3/8 77,5 3 2, /2" 2,3 /2 77, /2" 2,3 3/ , /4" 26,7 / /4" 26,7 3/ ,5 5 36, /4" 26,7 99, " 33,4 / " 33,4 3/ , " 33, /4" 42,2 7, /2" 48, /2" 48,3 / A8 2" 60,3 / , A8 2" 60,3 / " 60, RW/en without notice, the specifications given in this document. ( c) 205 Norgren Ltd. 5/5
11 Tubing nut 830F4 øa Split ring 830J Ø A for /8" 0,3 4, F4000 /4" 3, F /8" 7, 4, F40600 /2" 2,3 5, F /4" 26, F40900 " 33,4 8, F4000 /4" 42,2 9, F400 /2" 48, F4200 2" 60,3 23, F4300 for /8" 0, J000 /4" 3, J0400 3/8" 7, J0600 /2" 2, J0700 3/4" 27, 5,5 830J0900 " 34, J000 /4" 42,6 6,5 830J00 /2" 48,5 6,5 830J200 2" 60,4 8,5 830J300 Tubing washer 8307 Tubing O -ring HNR (yellow) 8000K for /8" 0,5, /4" 3,8, /8" 7,5, /2" 2,8, /4" 27, " 37, /4" 42, /2" 48, " 60, For tube Ø /8 8,9,9 8000K2000 /4 2, 2,7 8000K /8 6,9 2,7 8000K2800 /2 9,8 3,6 8000K /4 26,2 3,6 8000K ,5 3,6 8000K3000 /4 40,6 5,3 8000K300 /2 43,8 5,3 8000K ,8 5,3 8000K3300 Thread O -ring ISO parallel thread HNR (yellow) 8000K For thread /8 8,9,9 8000K2000 /4 2, 2,7 8000K /8 5, 2,7 8000K2600 /2 9,8 3,6 8000K /4 24,6 3,6 8000K ,8 3,6 8000K23200 /4 37,5 5,3 8000K400A8 /2 43,8 5,3 8000K ,5 5,3 8000K4008 Warning These products are intended for use in industrial compressed air and rail transport systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI NORRN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. 5/5 without notice, the specifications given in this document. ( c) 205 Norgren Ltd. RW/en
83 series Brass compression fittings Ø 1/ nominal pipe size, NPT thread
83 series rass compression fittings Ø /8..., NPT thread For use in areas of vibration Pre-assembled units No special assembly tools or heat required an be remade without damage to tube Suitable for use
More information82 series Brass compression fittings
> > Port size: Ø 6... 42 mm tube size, SPP and SPT thread > > Suitable for use on seam welded as well as seamless tube or pipe > > For use in areas of vibration > > Pre-assembled units > > No special assembly
More informationCompression Fittings 36 Series Metric
6 Series 4 mm 28 mm O/ l l l l Wide range of types and sizes Rugged and durable Suitable for use under extreme conditions of pressure and temperature Ideal for most general industrial applications Technical
More informationT84T - Excelon Plus Modular System 3/2 shut-off valve
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > 3/2 way function > Threaded exhaust port > Lockable in closed
More informationWeight (kg) Dimension No. G1/4 Exhausting None 0,2 1 T F2BG *1) Interface Exhausting None 0,4 3 T10-N10-D2BN
T > > Port size: / or interface version > > Low operating forces > > High durability > > Easy installation, simple operation and maintenance free > > Full bore passage to maximise flow rate > > Wide pressure
More information25000, 4/2 Direct solenoid actuated poppet valves
> > Port size: /4, /2 > > Working from 0 bar up > > Suited for outdoor installation > > Suitable for vacuum range down.33 0-2 mbar l/s > > : 65, Ex em, Ex d TEX approved (see solenoid table) Technical
More information60 series, 2/2 or 3/2 Ball valve
60 series, / or 3/ > > Port size: Rp/8... Rp3, /8... > > Ideally suited for most general purpose applications > > Easy installation, simple operation and maintenance free > > 3-way ball valves with actuator
More informationF84G - Excelon Plus Modular System General purpose filter
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > 5 or 40 micron particle and high efficiency water removal
More informationICO2S - 2/2, 3/2 or 5/2 Exia poppet valves Electromagnetically actuated, solenoid pilot operated
ICOS - /, / or 5/ Exia poppet valves > > Port size: /... / (ISO G/NPT) /... (Flanged) > > Zone 0, Exia solenoid pilot operated valve > > Safety integrity level and > > Reliable and long life, ideal for
More informationL84M, L84C - Excelon Plus Modular System Micro- and oilfog lubricator
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Flow sensor provides a nearly constant oil/air ratio over
More informationPneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
More informationPneufit C composite and Pneufit M fittings Inch
Pneufit composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad
More informationF84C - Excelon Plus Modular System Oil removal filter
> Port size: 3/8... 3/4 (ISO G/PTF) > Light weight Polycarbonate bowl > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > High efficiency oil and
More informationF84V - Excelon Plus Modular System Oil vapour removal filters
> Port size: 3/8... 3/4 (ISO G/PTF) > Light weight Polycarbonate bowl > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Adsorbing type activated
More informationPneufit Push-in Tube Fittings Metric
Pneufit Push-in Tube ittings etric 4 14 mm O/ Very compact units asy insertion for rapid assembly of pneumatic circuits Positive anchorage ll P taper threads pre-coated with non-pt based sealant traight
More informationBL68 - Olympian Plus plug-in system Filter/regulators and lubricators
> > Port size: 3/4... /2 (ISO G/ PTF) > > Complete air processing units pre-assembled, ready to install Technical features Medium: Compressed air only Maximum operating pressure: 7 bar (246 psi) Pressure
More informationSuper X Inline 3/2 and 5/2 Spool valves, solenoid and pilot actuated
> > Port size: G/8 & G/4 > > Low and high power solenoid coil options > > End, side or face mounting solenoids > > Light weight corrosion resistant materials > > Option for manual override acting directly
More informationBL84 - Excelon Plus Modular System Filter/regulator - Lubricator Combination Units
BL84 - Excelon Plus Modular System > Port size: 3/8... 3/4 (ISO G/PTF) > Unique Quikclamp connection system offers full modularity > 40 micron particle and high efficiency water removal (> 98%) > Shut
More information26230, NAMUR 3/2 & 5/2 Indirect solenoid actuated spool valves
60, 8007 NAMUR / & / > > Port size: G/ and NAMUR interface > > Easily interchangeable solenoid system > > For single and double operated actuators > > Standard manual override with detent > > Maintenance-free
More informationMale stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
More information2oo2 with bypass valve exhaust guards and indicators. 2oo2 I4. N/en
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability Modular design - Maxseal valves ypass function enables valve removal online Stainless
More informationNFPA Double acting imperial cylinders
> > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationWeight (kg) Model L92C- P-ETN. N/en
Excelon Pro Lubricator - Oil Fog ø 6... mm, G /8... G /8 Configuration flexibility Excellent value Low weight No tools required for assembly Technical features Medium: Compressed air Operating pressure:
More informationVP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control
VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional: serial interface with VP-Tool Software > > Optional
More informationTubing & Hose Metric. Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel
Tubing & Hose Metric Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel Available in a variety of different types to suit a wide range of applications
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationV03, V04, V05 (EXCEL 32) 2/2 & 3/2 Direct solenoid actuated poppet valves
V0, V0, V05 (EXCEL ) / & / > > Port size: G/8, G/ > > Extensive range of power and orifice size options > > Choice of manual override > > Compact installation > > Removeable coil > > Standard exhaust diffuser
More informationstainless steel compression fittings
compression fittings principle of compression fittings egris has used its long experience of brass compression fittings to develop a range of compression fittings. These fittings are resistant to aggressive
More informationLRM/55401/M, Roundline cylinder Magnetic piston, double acting
LRM/5540/M, Roundline cylinder > > 3... 00 mm > > Clean line design > > Low friction, long life seals > > Standard magnetic piston for full control system versatility > > Non-lube operation > > Shock and
More informationFittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
More informationSBM TECHNOLOGY Cooling / Air Recovery Valve
SBM TECHNOLOGY Cooling / Air Recovery Valve Part no. VSP15203x Advanced high pressure seal technology Integrated non-return valve Robust, compact & lightweight design Proven & reliable technology Maintenance
More informationF64C, F64H - Olympian Plus Plug-In System Puraire high efficiency coalescing filter
> > Port size: /... 3/ (ISO G/PTF) > > Service indicator standard > > High efficiency coalescing filters > > Quick release bayonet bowl > > Coalescing element removes sub-micron particles and converts
More informationFIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
More informationA44000, LINTRA-LITE Rodless Cylinders Non-magnetic and Magnetic Piston, double acting
> > Ø 25... 40 mm > > New compact, spacesaving design > > Proven sealing system > > Integral switch mounting > > uffer or adjustable cushioning > > Standard foot mountings Technical features Medium: Compressed
More informationP64F - Olympian Plus plug-in system Soft start/dump valves
> Port size: /4... /4 (ISO G/PTF) > Solenoid, air pilot or manual operator > ssists machine designers in complying with the European Machineries Directive > High forward flow and capacity dump facility
More informationONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
More informationT84T - Excelon Plus Modular System 3/2 shut-off valve
> Port size: 3/8" to 3/4" (PTF/ISO G) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > 3/2 way function > Threaded exhaust port > Lockable in
More informationDrain. Technical data, standard model, shut off valve, filter/regulator with exhaust port and lubricator. Element
BL9 Excelon Pro Combination unit Filter/Regulator and Lubricator ø mm, G / Configuration flexibility Excellent value Low weight No tools required for assembly Technical features Medium: Compressed air
More information, /2 Soft start ( soft clutch ) valve
00, 00 / Soft start ( soft clutch ) valve > > Port size: G > > Ideal for soft starting of the pneumatically operated clutch on presses > > eduction wear and tear > > Noise-reduction > > Compact design
More informationfor plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
More informationHigh pressure valves. 80 to 350 bar
80 to 350 bar High switchable p Hermetically sealed poppet valves Excellent repeatability of switching times Function even with lager voltage tolerance Compact design DN to DN 40 Technical data Medium:
More informationOperating pressure (bar) kv factor (m 3 /h) *3)
/ poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar For
More informationPrestolok 2. Push-in fitting. Catalogue UK
Prestolok Push-in fitting Index Straight connectors male - SPT F3P - p. 6 male - SPP F4P - p. 6 male - metric F8P - p. 7 female - SPP G4P - p. 7 union HPK - p. 7 unequal union HPK - p. 7 90 elbows adjustable
More informationSpecial valves. Logic components AND/OR Timer 2/2 way screw-in valves Miniature screw-in pressure regulators Relief valves
Contents Description Page Dual-pressure valve (AND) 3 OR valve (OR) 33 Timer 34, 35 / way screw-in valves 36, 37 Miniature screw-in pressure regulators 38, 39 Relief valves 40 Special valves Logic components
More informationDrain. Element. Flow (dm 3 /s) * B92 - K- T1-RMG. N/en
BG, BB Excelon Pro General Purpose filter/regulator ø... mm, G /...G / Configuration flexibility Excellent value Low weight No tools required for assembly Technical features Medium: Compressed air Operating
More informationconnection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
More informationVR61 and VR62 3/2, 2 x 3/2, 5/2 and 5/3 directional control solenoid and pilot valves 1/4 or 3/8
V6 and V6 /, x /, 5/ and 5/ directional control solenoid and pilot valves / or /8 igh flow rate roven sealing system using erion experience in the chemical and process industry aintenance-free ptional
More informationSBM TECHNOLOGY PET Blow Valve Block
Advanced high pressure seal technology Robust, compact & lightweight design Proven & reliable technology Maintenance & service friendly High flow rate exhaust function Minimal dead space volume (< 35ml)
More informationPneumatic Connectors, Tubing & Cylinder Control Accessories
Pneumatic Pneumatic onnectors, Tubing & ylinder ontrol ccessories 290 G-ca Index Page No Push-in Fittings Overview.3 -.7 Push-in Fittings.8 -.22 Push-in Fitting Dimensions.23 -.47 ylinder ontrol ccessories
More informationFlow. group *2) G1/4 1, , B G1/ , B /4 NPT , B N/en
/ poppet valves electromagnetic actuated, directly controlled G /4, G / or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to,33 0 - mbar For a.c. solenoid systems with integrated
More informationMain Block Series. Concentrated Branching Joint for Assembly. Assembling Manifold Blocks for Concentrated Branching
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Concentrated ranching Joint for Assembly Main lock 310 Assembling Manifold locks for Concentrated ranching Same Flow Rate with
More information24010, 3/2 Direct solenoid actuated poppet valve
00, / > / (G or NPT) Inline & NAMUR > Main application: Single acting actuators in intrinsically safe circuits > Approval according to IEC 68, multichannel up to SIL > Solenoid valve with low power consumption
More informationMinimal Fitting Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Ultra-Small arb Fitting for Pneumatic Piping Fitting 266 Suitable for Vacuum Piping by a Combination with Vacuum Tube Suitable
More informationVR61, 3/2, 2 x 3/2, 5/2 or 5/3 Solenoid and pilot actuated spool valves
V6, /, x /, 5/ or 5/ > > ort size: /4 (S /T) > > igh flow rate > > roven sealing system using erion experience in the chemical and process industry > > aintenance-free > > ptional manual overrides > >
More informationV82 series - Redundant valve manifold systems - Compact 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
V8 series - Redundant valve manifold systems - Compact oo Safety, oo Availability and oo Safety and Availability > > Compact design - Herion valves > > Exhaust guards as standard > > SIL certified components
More informationSUMMARY STAINLESS STEEL FITTINGS FITTINGS P PUSH-IN FITTINGS, STAINLESS STEEL D3.2 P STANDARD FITTINGS SERIES XA D3.8 P QUICK FITTINGS SERIES XC D3.
SUMMARY STAINLESS STEEL D3 P PUSH-IN, STAINLESS STEEL D3.2 P STANDARD SERIES XA D3.8 P QUICK SERIES XC D3.11 SUMMARY STAINLESS STEEL D3.1 PUSH-IN, STAINLESS STEEL The push-in fittings in the XR can be
More informationPneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
More information97100 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT
97 Inline /, 5/ & 5/ spool valves electromagnetic actuated, indirectly controlled G /, / NPT For single and double operated actuators Crossover-free switching, switch-over function guaranteed even with
More informationBL84 - Excelon Plus Modular System Filter/regulator - Lubricator Combination Units
BL84 - Excelon Plus Modular System > Port Size 3/8" to 3/4" (PTF/ISO G) > Quickclamp connection system offers full modularity > Shut off valve & Filter/regulator with tamper resistant feature > Metal bowl
More informationPneumatics CONTENT
Pneumatics CONTENT 2 3 4 5 6 7 8 9 Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators
More informationTable Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
More informationBrass ball valves 60 series
Brass ball valves 60 series /8 to 3 Rp /4 to Rp Ideally suited for most industrial applications Easy installation, simple operation and maintenance free Full bore passage giving minimum flow resistance
More informationSeries 870 Sleeve coupling for repairs Sizes Ø 25, Ø 32, Ø 40, Ø 50
ouplings for polyethylene pipe series cert. n 0003 ISO 9001 LFFI 01037/03 G Function couplings, which are supplied in brass for diameters up to 63 mm and in cast iron for larger sizes, are used for connecting
More informationSentronicPLUS IO-Link CLASS A Electronic Pressure Regulator. Installation Manual
SentronicPLUS IO-Link CLASS A Electronic Pressure Regulator Installation Manual Sentronic PLUS ASCO NUMATICS Sentronic PLUS Electronic Pressure Regulator Sentronic PLUS is a 3-way proportional valve with
More informationCOUPLING CATALOGUE. Push-In, Standard, Conventional, Accessories
COUPLING CATALOGUE Push-In, Standard, Conventional, Accessories Coupling Catalogue Table of Content Push-in and Composite Building Block... 4 Standard Connectors... 12 Quick Connection Systems P5.... 16
More informationTube Fitting PP Series
http://www.pisco.co.jp FITTING ONTOLLE VALVE TUE MAKE-TO-ODE PODUTS Push-In Fitting Type for lean Environment Tube Fitting 178 opper alloy free material Nongrease lean-room packaging option hemical Industry
More informationASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
More informationVCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
More informationAUTO STAR with central connector M12x1
with central connector M2x Non corrosive spool and sleeve for long trouble free life 5/2 and Glandless Valves Actuated Sub-base Mounted ISO 5599- #, #2, #3 6 bar (4,5 W) and 0 bar (2 W) 24V DC solenoids
More informationV44/V45 series, 2 x 3/2, 5/2 & 5/3 Mini ISO Valves
V/V series, x /, / & / > > x/, / and / valves, ISO 07-/ VDMA 6, Size 6 mm > > Solenoid and pilot actuated > > High performance, compact design > > Flexible sub-base system > > Multipressure system capability
More information98025 NAMUR/INLINE 3/2 way poppet valves electromagnetic actuated, indirectly controlled G 1/2, 1/2 NPT or flanged with NAMUR Interface
9805 NMUR/INLINE / way poppet valves electromagnetic actuated, indirectly controlled G /, / NPT or flanged with NMUR Interface Main application: single operated actuators TÜV-approval based on type examination
More informationTube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications
Self-align Fittings Series H, D,, Flared ridge ferrule Prevents accidental loss of ferrule when inserting tubing into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening
More informationLPRA/182000/M, ISO cylinder Magnetic piston, double acting
> > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE
More informationMiniature Fittings Series M
Miniature Fittings Series M pplicable Tubing: Ø 3.2, Ø 4, Ø 6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening
More informationVP23 3-way proportional pressure control valve Directly-controlled seat valve with µp-driven pressure control G 1/4... G 3/4
-way proportional pressure control valve Directly-controlled seat valve with µp-driven pressure control G /... G / All-digital control electronics Variable pressure control Optional: serial interface with
More informationFITTINGS, CONTROLS AND ACCESSORIES
, CONTROLS AND ACCESSORIES Regardless of your application, Norgren has fittings and accessories to complete your pneumatic package. Norgren has an extensive lineup of Pneufit push-in fittings in metric
More information26220, 26230, For single- and double-acting drives. Standard manual override with detent. Compact design. Exhaust air silencers.
60, 60, 8007 For single- and double-acting drives /, / and / Directional Control Valves Modular NAMUR design Actuation: Electromagnetic Indirectly controlled spool valves Connections G /8, G /, / NPT Standard
More information97300 NAMUR 3/2 & 5/2 way spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, NAMUR Interface
9700 NAMUR / & / way spool valves electromagnetic actuated, indirectly controlled G /, / NPT, NAMUR Interface For single and double acting actuators / or / way function in one valve Easily interchangeable
More informationLF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
More informationLRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting
> > Ø 32... 320 mm > > Comprehensive range for the utmost versatility > > Wide temperature range > > Supplied complete with piston rod locknut > > Conforms to ISO 15552 (ISO 6431, VDM 24562 and NFE 49-003-1)
More informationC D J K N N/UK /02. Our policy is one of continued research and development. We therefore reserve the right
Manifold system Manifold plate Valve ports V6 V6 V62 Model kg Model kg Model kg 2 2222,23 3 2223,28 4 2224,6 6 2226,86 8 2228, 222,36 2 2222,6 4 2224,86 6 2226 2, 8 2228 2,36 2 2222 2,6 2222,28 2223,45
More informationTUBES, HOSES, AND FITTINGS
TUBES, HOSES, AND FITTINGS 1. DESCRIPTION This section contains instructions and specifications for aircraft system plumbing and fittings. Page 1 2. MAINTENANCE PRACTICES A. Ice Protection System Compression
More informationValves, Fittings, and Manifolds Catalog. We make things MOVE
Valves, Fittings, and Manifolds Catalog We make things MOVE We Make Things Move A forward-thinking innovator, Bimba provides industry-leading pneumatic, hydraulic and electric motion solutions that are
More informationLIQUIDLINE PROGRAM. Connections for cooling water. dezincification-resistant brass. Messing. aluminium.
LIQUIDLINE PROGRAM Connections for cooling water dezincification-resistant brass Messing aluminium stainless steel 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents,
More informationTubes and stiffener sleeves Use of stiffener sleeves
Tubes and stiffener sleeves Use of stiffener sleeves very thick wall thickness not recommended thicker wall thickness decreasing pressure resistance increasing wall thickness ideal wall thickness no stiffener
More information3/2 Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface
3/ Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface Suitable for instrumental air, neutral gaseous and liquid fluids and
More informationProduct warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
More informationHydraulic pressure switch 20D Acc. to ATEX
Acc. to ATEX 5 to 400 bar For Ex zones 1 and 2 (gases) as well as Ex zones 21 and (dusts) category II2G, type of protection EEx de IIC T6 Microswitch with gold plated contacts Electrical connection: connector
More informationH/DL/L/LL Series. Tube. Union nut. Flared I.D. Flared I.D. can prevent the tube from deforming inwards. Specifications
Flared ridge ferrule Prevents accidental loss of ferrule when inserting into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening nut. Flared I.D. Provides low flow resistance
More informationPRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting
> > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationLight Coupling Series
http://www.pisco.co.jp FITTING ONTROLLER VALVE TUE MAKE-TO-ORDER PRODUTS Push-In Fitting oupling Light oupling 342 oupling with Push-In Fitting. Easy oupling and Uncoupling with One-Hand Operation. Suitable
More informationTube Fitting EG Series
FITTING ONTROLLER VALVE TUE MAKE-TO-ORDER PRODUTS Push-In Fitting Type for Anti-Static Environment 196 ESD Static dissipative Resin Suitable for Electrostatic dissipating and Antistatic Applications. Anti-spatter
More information37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
More informationOur policy is one of continued research and development. We therefore reserve the right
For single and double operated actuators 3/2-, 5/2- and 5/3 Directional Control Valves Actuation: Electromagnetic Indirectly controlled soft seal spool valves Connection G /4, /4 NPT NAMUR Interface Exhaust
More informationLAP4, LAP8. Pneumatic linear drive sizes 4 and 8
Pneumatic linear drive sizes 4 and Torsional and bending resistant profiles T-slots in the outer profile enable individual mounting options Adjustable guiding system (LAP4) Precise linear roller guiding
More informationMiniature Regulator. Standard Specifications. Model IN side OUT side (Applicable tubing O.D.) Proof pressure Maximum operating pressure
Miniature Regulator Series 00F Compact and lightweight ( g) Low cracking pressure 0.0 MPa Standard model equipped with backflow function Standard Specifications Port size Fluid side side (Applicable tubing
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationStainless One-touch Fittings. Applicable Tubing Tube material Tube O.D. Thread Nut
Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release
More information