Special valves. Logic components AND/OR Timer 2/2 way screw-in valves Miniature screw-in pressure regulators Relief valves
|
|
- Melina Hall
- 5 years ago
- Views:
Transcription
1 Contents Description Page Dual-pressure valve (AND) 3 OR valve (OR) 33 Timer 34, 35 / way screw-in valves 36, 37 Miniature screw-in pressure regulators 38, 39 Relief valves 40 Special valves Logic components AND/OR Timer / way screw-in valves Miniature screw-in pressure regulators Relief valves A4P0E-March 008 3
2 AND valves (dual pressure valves) G/8 In-line version Series AND 8 & 3 3 Actuation: Pneumatic Poppet valve Mounting through-bolts M5 Tube connection Thread Port size G/8 Weight (mass) kg 0.05 In any position Ambient temperature Medium temperature Medium Lubrication Note: When using below freezing point (0 ) it is necessary to consult us Filtered compressed air With or without oil mist lubrication Pneumatic characteristics Nominal pressure p n 6 Operating pressure p min Nominal flow Q N l/min 34 AND 8-/8 PA007 3 A4P0E-March 008
3 Poppet valve Mounting through-bolts M5 Tube connection Thread Port size G/8 G/4 Weight (mass) kg In any position Ambient temperature Medium temperature Medium Lubrication Note: When using below freezing point (0 ) it is necessary to consult us Filtered compressed air With or without oil mist lubrication Pneumatic characteristics Nominal pressure p n 6 Operating pressure p min Nominal flow Q N l/min OR valves (shuttle valves) G/8, G/4 In-line version Series OR 8 3 Dimension table and order instructions A B C D E F G H Order No. OR 8-/8 PA G/8 OR 8-/4 PA G/4 A4P0E-March
4 Timer In-line version Series T3P0 Versions: normally closed (NC) normally open (NO) Delivery includes: Timer without base plate please order this separately Mounting On base plate Tube connection Swivelling plug-in connection Port size mm For tube Ø 4/.7 In any position Ambient temperature Medium Filtered and lubricated or filtered and unlubricated air Pneumatic characteristics Nominal pressure p n 6 Operating pressure p min 8 Nominal flow Q N l/min 70 Time delay t max s max. 60 (according to type) Min. reset time s < 0. Dimension table, time delay and weight Time delay (s) Dim. A Weight (mass) kg T3P0-NG T3P0-NG T3P0-NG T3P0-NO T3P0-NO Adaptor for panel mounting at dimension A=78 A=9 A= Time Function delay (s) Order No NC * T3P0-NG-5 KL NC * T3P0-NG-30 KL NC * T3P0-NG-60 KL NO * T3P0-NO-5 KL NO * T3P0-NO-30 KL859 Adaptor for panel mounting at dim. A=78 KL860 Adaptor for panel mounting at dim. A=9 KL86 Adaptor for panel mounting at dim. A= KL86 * NC = normally closed NO = normally open 34 A4P0E-March 008
5 Single base plate bolt mounting version EAP-S push-in fitting Ø4 mm Base plate for timer Versions: Bolt mounting Rail mounting Single base plate rail mounting version EAP-H Description Mounting On rail to EN 500 (35 x 5 or 35 x 7,5) Connections Swivelling plug-in connection for tube Ø 4/.7 push-in fitting Ø4 mm Rail 35 mm to EN 500 Colour coding Connection Colour Tube connection green Input red Output 3 3 yellow Input or air supply Benennung Order No. Single base plate, bolt mounting version EAP-S KL866 Single base plate, rail mounting version EAP-H KL867 A4P0E-March
6 / way screw-in valves (check valves) G/8 G/ Series EVP 0 Actuation: pneumatic Spool valve with spring return Tube connection Port : Internal thread to IS0 8 Port : External thread to ISO 8 Port : G/8 internal, push-in. Ø 4 Port size See dimension drawing Weight (mass) kg See table In any position rings can be rotated 360 after the valve has been installed Ambient temperature Medium temperature Note: When using below freezing point (0 ) it is necessary to consult us Medium Filtered compressed air, neutrale Gase * Lubrication With or without oil mist lubrication ) Material Metal parts: Nickel-plated brass or stainless steel Springs: Stainless steel Seals: Buna N Pneumatic characteristics Nominal pressure p n 6 Operating pressure p min 0 0 Nominal flow Q N l/min See table Actuation Pneumatic Direct Actuation pressure p st See diagram * Other media on request ) we recommend the use of mineral oil VG 3 to ISO 3448 Nominal flow, tightening torque, opening pressure, weight (mass) Port size DN [mm] Q N [l/min] max. tightening [Nm] Weight Mass [kg] G/ with thread push-in fitting ø 6 G/ with thread 0.04 push-in fitting ø push-in fitting ø 8 G3/ with thread 0.45 push-in fitting ø push-in fitting ø 0 G/ with thread 0.40 push-in fitting ø 36 A4P0E-March 008
7 Pilot pressure in relation to operating pressure Pilot pressure (Port ) Operating pressure = P-Supply at Port = P-Supply at Port Example The cylinder can be stopped during extension and retraction / way screw-in valves (check valves) G/8 G/ Series EVP 0 with internal thread with push-in fitting Actuation: pneumatic Dimension table and order instructions F F F L L L M N P P P SW Order No. G/8 G/8 G/ EVP-/8 KL406 G/8 ø 6 ø EVP-/8 KL4063 G/4 G/4 G/ EVP-/4 KL4064 G/4 ø 6 ø EVP-/4 KL4065 G/4 ø 8 ø EVP-/4 KL4066 G3/8 G3/8 G/ EVP-3/8 KL4067 G3/8 ø 8 ø EVP-3/8 KL4068 G3/8 ø 0 ø EVP-3/8 KL4069 G/ G/ G/ EVP-/ KL4070 G/ ø ø EVP-/ KL407 A4P0E-March
8 Miniature screw-in pressure regulators G/8, M5 Series HMR, HMRS Versions: Screw-in version for panel mounting Viton version* * Note: The Viton version can be used for temperatures up to 40. Please consult us before using the valve in high temperatures, especially when using other media than compressed air. Pressure regulating valve, piston type with secondary pressure relief Tube connection Thread Port size Input: G/8 and M5 Output: M5 Gauge: M5 Nominal bore mm. Weight (mass) kg 0.08 (0.) In any position Ambient temperature Medium temperature Medium Note: When using below freezing point (0 ) it is necessary to consult us Filtered compressed air, neutral gases* Lubrication With or without oil mist lubrication ) Material Metal parts: Brass Ms 58 Springs: Stainless and zinc-plated steel Seals: Buna N Pneumatic characteristics Operating pressure p min 0 Secondary pressure p min 8 Flow rate Q N l/min 00 ** * Other media on request ** at p = 0 to p = 6, Dp = ) We recommend the use of mineral oil type VG3 to ISO A4P0E-March 008
9 Screw-in version Panel mounting version Miniature screw-in pressure regulators G/8, M5 Series HMR, HMRS Versions: Screw-in version for panel mounting Viton version* Version Port size Sealing material Order No. Screw-in version G/8, M5 Buna N HMR-/8 KL407 Panel version G/8, M5 Buna N HMRS-/8 KL4074 Screw-in version G/8, M5 Viton HMR-/8-V KL4073 Panel version G/8, M5 Viton HMRS-/8-V KL4075 * Note: The Viton version can be used for temperatures up to 40. Please consult us before using the valve in high temperatures, especially when using other media than compressed air. A4P0E-March
10 Relief Valves G/8, G/4 Screw-in version Series USV Adjustment: Spring-loaded poppet valve with adjustable opening pressure USV-/8 USV-/4 Port size G/8 G/4 Weight (mass) kg In any position Temperature Medium Compressed air Opening pressure. 3 or 3. 6 (adjustable) Material Brass Adjustment Port size Order No.. 3 G/8 USV-/8 KY G/8 USV-/8 KY G/4 USV-/4 KY G/4 USV-/4 KY A4P0E-March 008
3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
More informationAIR PREPARATION UNITS 1/8" NPT & 1/4" NPT SERIES light
PNEUMATIC GROUP AIR PREPARATION UNITS 1/" NPT & 1/" NPT SERIES,,,, MPa 1,,,,, MPa 1, 1 3 5 7,,,, MPa,, 1, MPa, Made in Germany MR- E MPa 1,,,,, 1,, p max= Port size Recommended flow Type Page No. (l/min)*
More informationG1/8-3/2-Way Valves - Series K9
PDE600PNUK 3/-Way Valves - Series K9 G1/8-3/-Way Valves - Series K9 Actuation: indexed spring return indexed, secured in two positons Pushbutton Cam operation Toggle cam operation Plunger operated Cam
More informationSolenoid valves VZWP, servo-controlled
Key features and overview Function The solenoid valve VZWP-L- is a servo-controlled 2/2-way valve with solenoid coil. The solenoid valve is closed when de-energised. When energised, the differential pressure
More information5/2 and 5/3 Way Valves
Caracteristics to VDI 9 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Ceramic Spool Valve Mounting On base plate, Tube connection Base plate Port size G1/
More informationFront panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SVS-3-1/8 SVOS-3-1/8 SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent
More informationPressure Control Valves
Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal
More informationMANUALLY AND MECHANICALLY OPERATED VALVES Product Index
MANUALLY AND MECHANICALLY OPERATED VALVES Product Index Function pipe connections type of operator technology ports/positions * - instant fittings O.D. (mm) w - internal thread ØG * ØG NC NO /8 / /8 Manually
More informationSolenoid valves VZWM-L, NPT
Key features and type codes General Indirectly actuated diaphragm valve Process valve connection N14 N2 Flow rate 1400 31000 l/min Available in brass or stainless steel casting Wide range of coils VZWM
More informationCompact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm
SZ Compact Cylinder Specifications Features Type Series Compact Cylinder SZ Configurations SZ6 Double Acting, Single Rod, SZD6 Double Acting, Double Rod, SZV6 Double Acting, Non-Rotating, SZ7 Single Acting,
More informationDirectional Control Valves
Overview HYDAC offers several functions of the Directional Control Cartridges. HYDAC Manually operated position, - way normally closed, spring return, directional valve features poppet design. It offers
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More informationFront panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent P Pushbuttons return
More informationAir preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview Air preparation unit three-piece 8 11 12 16, 17 Air preparation unit two piece 8 11 12 16, 17 Air preparation Filter-regulator
More informationPneumatic Power Valves Series 75/76 Manual, Mechanical, Pneumatic and Electric Valves
Quic-Pics Catalogue Pneumatic Power Valves Series 75/76 Manual, Mechanical, Pneumatic and Electric Valves Contents: Product Line Overviews 2 Manually Operated Valves 5 Pushbuttons 6 Toggle Switch 8 Knob
More informationPiston Rod Cylinders. Not for new design - Please contact ORIGA Customer Service:
Overview System Fig. Symbol Series Page Single acting For contactless position For contactless position With through piston rod For contactless position Non-rotating For contactless position Single acting
More informationPorts. Dr. Breit GmbH Carl-Zeiss-Straße 25 D Heiligenhaus phone-contact:
Solenoid operated EEx d IIC T6 Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves,
More information3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
More informationRelated Products VR4151/4152 Relay Valve
Related Products VR4151/4152 Relay Valve Appropriate output sequences are affected according to the signal received from the machanical valve. Specifications 1 Fluid Air Operating pressure 0 to 1.0MPa
More informationAir preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview Air preparation unit three-piece 22, 23, 26 29 37, 39 Air preparation unit two-piece 22, 23, 26 29 37, 39 Filter-regulator
More informationINTEGRATED ELEMENTS. 1. FLIP-FLOP VALVES (pneumatic) ORDER CODIFICATION : AZ100354
INTEGRATED ELEMENTS 1. FLIP-FLOP VALVES (pneumatic) It frequently happens that with only one pilot signal available it is necessary to determine any reciprocating movement having two stationary positions.
More informationSolenoid valves VZWM-L
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationTube connection Ambient temperature range Medium temperature range. T min C +80. C T max. max. Weight (mass) kg See table
Cylinder Ø32-125 mm with blocking device Series DZB... Blocking reverse stroke Series DZBA... Blocking forward stroke Mountings to ISO 15552 (ISO 6431) Special versions: according to CETOP RP 53 P (Piston
More information2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50
/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5
More informationSolenoid valves VZWM-L
Key features and type codes Brief description Indirectly controlled poppet valve with diaphragm control Connection, valve G¼ G2 Flow rate 1,400 31,000 l/min Available in brass or stainless steel casting
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
More informationTransmitters: Relay Valve VR4151/4152
Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2
More informationMounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217
1 00137795 Version Spool valve, zero overlap Sealing principle Soft sealing Mounting on manifold strip P-strip Working pressure min./max. See table below Control pressure See table below min./max. Ambient
More informationTransmitters: Relay Valve
Relay Valve VR5/5 Series Appropriate output sequences are affected according to the signal received from the mechanical valve. It is equivalent to the auxiliary relay of an electrical system. Specifications
More informationType 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
More informationCONTROL ELEMENTS. Pneumatic
CONTROL ELEMENTS Pneumatic HOERBIGER-ORIGA... For fast and effective automation solution HOERBIGER-ORIGA is a manufacturer and supplier of pneumatically driven components and systems designed to solve
More informationAngle Seat Control Valve 7020
Angle Seat Control Valve 72 DN 8 up to DN 8 PN 4 Pneumatically operated control valves for neutral through to highly aggressive media. Integrated positioner Compact design All parts contacting the fluid
More informationStraight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16
Straight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16 Pneumatically operated straight bodied seat valve for the use in chemical plants, process technology and industrial automation. Unaffected by
More informationAir preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece,, unit two piece,, Filter-regulator,,, 9 Filter-water-separator,, 9 Dust filter,, 9 Pressure regulating
More information1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110
Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902
More informationCommon wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.
/ and 4/ multi-way valves; servo assisted; DN 4; flow rate: l/min.; /8, legris ø 6 mm port connections Advantages / Benefits Optimised system solutions due to high level of modularity Compact design with
More informationMiniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
More information40-501, , ,
-9 Silencer, plastic. -5, -5 Silencer, sintered bronze. - Flow control silencer. -5 Check valves. -5 Hand sliding valves. -5, -5 Quick couplings. -5 Miniature regulator, screw-in type.6-55 Check valves.7-56,
More informationPressure Switches. Pressure switches, pneumatic. Pressure switches, electronic
Contents Description Page Pressure switches, pneumatic, with plug 50 Pressure switches, pneumatic, with flat pins 51 Pressure switches, pneumatic 52 55 with internal thread with flange connection Pressure
More informationExamples 3/2-way valve A T NO: Symbol
1/1 Hauhinco-3_2-way valve_b1_dn3-25_pn320_pn500_x,y-intern water s 01/2016 3/2-way valve B1 X,Y - DN3 DN25 PN320, PN500 Features: Hydraulically actuated directional seat valve controlling liquid media.
More information3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics
65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space
More informationAngle Seat Valves by Schubert & Salzer
Angle Seat Valves by Schubert & Salzer Angle seat valves contact factory Angle seat valves Angle Seat Valve 7010, reinforced design stainless steel 2" up to 3" 580 psi diaphragm actuator, stainless steel
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
More informationUnloading relief valve: KPR-10/...P... 10/19 Relief reducing valve:
PRESSURE VALVES CONTENTS: Page Relief valves: RV06-2A...... 1/19 RV08-2A...... 2/19 RV22-2A...... 3/19 KPZ10/...... 4/19 KP-70/...... 5/19 KP60/...... 6/19 RM80-...... 7/19 Relief valve-prefill type: KPP...10/......8/19&9/19
More informationSafety Shut-off Valve SL/SID/RSL
Safety Shut-off Valve SL/SID/RSL High accuracy shut-off Low pressure loss Operating temperature up to -30 C Easy maintenance DVGW-approval Applications They are designed for transmission and distribution
More informationSeries RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C
Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
More informationSELECTION CHARTS 100 Ports Order No. Style psig/6 bar Inlet Outlet Exhaust 112
SELECTION CHARTS 4-Way s Flow @ 100 Ports Order No. Style psig/6 bar Inlet Outlet Exhaust TV-4D Spool 7.5 scfm #10-32 #10-32 holes in body D 126 TV-4D-M5 Spool 180 l/min M5 M5 holes in body D 126 TV-4M
More informationSeries VM. Mechanical Valve. VM1000 Side piping Bottom piping. VM100 Side piping Bottom piping VM200. Model Dimensions (mm) 2-38.
Mechanical Valve Series VM Model Dimensions (mm) VM1000 Side piping Bottom piping 11 X 36 X 16 11 X 28 X 25 VM100 Side piping Bottom piping 17 X 44 X 25 17 X 44 X 30 VM200 25 X 40 X 52 Basic Roller Lever
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationSeated valve 500 Type WVM-4B NG 4 up to 12 l/min
Seated valve 500 Type WVM-4B Features Direct operated Leakage free Good resistance to corrosion As 2/2-, 3/2-, 3/3-, 4/2-* or 4/3-valve with solenoid or alternative actuation * pilot-operated Design With
More informationSeated valve 500 Type WVM-4B NG 4 up to 12 l/min
Seated valve 500 Type WVM-4B Features Direct operated Leakage free Good resistance to corrosion As 2/2-, 3/2-, 3/3-, 4/2-* or 4/3-valve with solenoid or alternative actuation * pilot-operated Design With
More information3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
More information2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 Standard valve body Type 2000 can be combined with Short valve body High flow rate and long life cycle Very high cycle
More informationFlow sharing control block in mono block / sandwich plate design M6-22
Flow sharing control block in mono block / sandwich plate design M6-22 RE 64322 Edition: 01.2015 Replaces: 05.2012 Size 22 Series 3X Maximum operating pressure on pump side 350 bar on consumer side 420
More informationPilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P
Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate
More informationCOILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
More informationVALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid
More informationSTAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE
FEATURES The stainless steel ARES valve is intended for the automatic shut-off of networks of fluids. The full-bore, inclined-seat body and the excellent flow-rate coefficients allow for very low pressure
More informationLogic elements. Differential pressure sensing elements for applications up to 350 bar (5000 psi) and 400 L/min (100 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Logic elements Differential pressure sensing elements for applications up to 50 bar (5000 psi) and 400 L/min (00 USgpm) Logic elements LOGC ELEMENTS... -4 APPLCATON
More informationVALVES SERIES 70 DISTRIBUTORS
VALVES SERIES 70 This is Metal Work s full range. Available in three sizes: 1/8, 1/4, 3/8, 1/2. Three versions: 3/2; 5/2; 5/3, four different types of actuation (mechanical, manual, pneumatic and electric).
More informationDirectional Seat Valve Series D4S (Denison)
Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01)
More informationAngle seat valve VZXF, NPT
Angle seat valve VZXF, NPT -V- New Angle seat valve VZXF, NPT Key features Function Angle seat valves are externally actuated valves. These valves are actuated by a direct supply of compressed air. In
More informationBRONZE ZEUS PNEUMATIC ANGLE-SEAT VALVE
FEATURES The bronze ZEUS valve is intended for the automatic shutoff of networks of fluids. The full-bore inclined-seat body and the excellent flow-rate coefficients allow for very low pressure drops.
More informationSeries VCHR. Direct Operated Regulator for 6.0 MPa (Relieving Type) Service life: 10 million cycles. How to Order
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
More informationBall valves and shut off valves
Shut off valves HE Hand slide valves W Ball valves QH, manually actuated Ball valves VAPB, mechanically actuated Ball valves VAPB CR, mechanically actuated, corrosion resistant 2003/10 Subject to change
More informationSeries RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C
Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More informationMINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Minivalves with / NO NC poppet, Installation in any position Push-in fittings for pipe Ø 4 mm and on the valve body Low actuation force Rapid, accurate
More informationVALVES RANGE FOR OPEN LOOPS T E C H N I C A L C A T A L O G
VALVES RANGE FOR OPEN LOOPS T E C H N I C A L C A T A L O G Valves range for open loop 2 18/07/2017 Valves range for open loop CONTENT CHECK VALVES 5 Direct operated valves 7 Pilot operated valves 11 Counterbalance
More information2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
More informationSeries P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
More information3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
More informationFront panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SVS-3-1/8 SVOS-3-1/8 SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent
More informationComplete Range of Movement Solutions
Complete Range of Movement Solutions A complete range of Movement Solutions are available from your Local Pirtek Centre. ISO & VDMA Pneumatic Cylinders Compact Cylinders Guided Cylinders Non-Standard Cylinders
More information2/2-Way Pressure Relief Valve CX DBV (Right-Angle Design)
2/2-Way Pressure Relief Valve CX DBV (Right-Angle Design) CX DBV-E Model code (also example order) CX DBV 12 120 G1 F P 24V Type CX DBV = Pressure relief valve Nominal size 10 = DN 10 12 = 15 = 20 = CX
More informationSPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 1507-18 mm - pad mounting body M1 connection x/ - 5/ - 5/ Series 50 ISO 1507- (18 mm) FEATURES M1 connection with electrical
More informationServo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
More information3/2-Way Valve DN 15 up to DN 40. Technical Information. normal function, normally closed. distributing, mixing function and shut - off function
3/2-Way Valve 78 DN 1 up to DN 4 Pneumatically operated 3/2-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, Data sheet Type 781) Compact design Unaffected
More informationFlanged Ball Valves KHBF / KHMF / KHMFF
Flanged Ball Valves KHBF / KHMF / KHMFF Model code (also order example) KHBF 16 PN040 11141 02 X... Designation KHBF = Block-type ball valve DN 16-25 (steel) KHMF = Sleeve-type ball valve DN 32-50 (steel)
More informationSeated valve bidirectional Type WVM-4B-Bi
Seated valve bidirectional Type WVM-4B-Bi Features Bidirectional (flow of fluid in both directions, independently of pressure prof) Low pressure drop Direct operated Leakage free Good resistance to corrosion
More informationChapter 11: Valves and Actuators with the NAMUR-interface
Right of authorship: the content of the training (wording, drawings, pictures) are owned by the author. Any utilization except for individual use is allowed only after permission of the author. Valves
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More information20 l/min (5 GPM) p max. Technical Features
Proportional Directional Control Valve, with Analogue Control Electronics PRM2-0 Functional Description Size 0 (D02) Q max 20 l/min (5 GPM) p max 320 bar (600 PSI) Technical Features Direct acting, proportional
More informationValves for Panel Mounting
2.2 page 31 2.2 Valves for Panel Mounting Selected models are available for explosion hazardous environment. They are ATEX-Ex certified. For detailed information refer to chapter 2.14. Selected models
More informationCPLab / CP Factory. Application module magazine. Data sheets
CPLab / CP Factory Application module magazine Data sheets Data sheet: Push-in fitting QSM-M5-4 #153304 Size Mini Nominal size 2.2 mm Type of seal on screw-in stud Sealing ring Container size 10 Design
More informationServotronic Digital 615 Series
Servotronic Digital 615 Series Proportional Technology www.asco.com PRESSURE CONTROL: 615 SERIES SERVOTRONIC Digital Servotronic Digital Greater versatility in automated production processes: Due to electronics,
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationDENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C
DENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C 2/2-Way Function / Cavity conform to ISO 7368 (DIN 24342) Publ. 7 EN 5060 A FEATURES, DESCRIPTION FEATURES x High flow cartridges give highest
More informationTest. What type of cylinder would you use? A. Single-acting cylinder B. Double-acting cylinder Answer:
Test This test allows you to establish whether your basic knowledge of pneumatic controls is sufficient for you to attend the advanced course P or whether you should attend the basic level course P. The
More informationVOLUMEC. Valve Position Indicator 02/04
VOLUMEC Valve Position Indicator 02/04 VOLUMEC Valve Position Indicator 02/04 Description Hydraulic manifold HB 4 Gear type Volume counter VCM 02/04 Indicator AVC 02 The Valve Position Indicator VOLUMEC
More informationEVP SERIES PROPORTIONAL CONTROL VALVES
EVP SERIES PROPORTIONAL CONTROL VALVES 207 Clippard is pleased to add the EVP series proportional control valve to our electronic product line. This product combines the features of the existing EV series
More informationAir preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 8 11 12 16, 17 unit two-piece 8 11 12 16, 17 Filter-regulator 8 11 13 16, 17 Filter-water-separator
More informationTRESHOLD SENSORS LOGIC PNEUMATIC COUNTERS TIMERS VALVES
PNEUMATIC TIMERS N.C / N.O. PNEUMATIC COUNTERS with / VALVE PANEL MOUNTED PNEUMATIC COUNTERS LOJIC VALVES OR GATES TRESHOLD SENSORS LOGIC PNEUMATIC COUNTERS TIMERS VALVES LOGIC PNEUMATIC LOGIC VALVES
More informationChapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
More information2,1 2, , ,1 2, W (DC) - 10 VA (AC) AM-5111 U2 DB 12 V DC - 24 V DC - 24 V AC V AC V AC IP65
B Miniature Electropilots CHRCTERISTICS mbient temperature Fluid Coutation system Connections Nominal bore () Nominal flow rate (Nl/min) Power consumption Connector Sleeve Coil Voltage Protection degree
More information