97300 NAMUR 3/2 & 5/2 way spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, NAMUR Interface

Transcription

1 9700 NAMUR / & / way spool valves electromagnetic actuated, indirectly controlled G /, / NPT, NAMUR Interface For single and double acting actuators / or / way function in one valve Easily interchangeable solenoid Crossover-free switching, switch-over function guaranteed even with small cross section air supply Manual override with detent Solenoids certified to ATEX, Ex ia and Ex m. Solenoids approved to IEC Ex, FM etc available on request Approval depends on magnetic system, see page! Technical features Medium: Filtered, lubricated or nonlubricated and dry compressed air Operation: Indirect solenoid operated spool valves Operating pressure:... 8 bar (below -0 C must be >, bar) Port size: G/, / NPT NAMUR Interface with integrated exhaust air Flow direction: Fixed Mounting position: Optional Electrical connection: See solenoid table Fluid/Ambient temperature: C Depending on solenoid system Air supply must be dry enough to avoid ice formation at temperatures below + C. Materials: Housing: Aluminium anodized Pilot flange: Plastic (PBT) Flange plate: Aluminium Seals: NBR Technical data / & / way indirect solenoid operated spool valves, standard design (Conversion instructions of / into / way function see page ) Symbol Port size,, Actuation Operating pressure (bar) *) Flow (l/min) Weight (kg) Dimension No. Model *) G / G / Flange Solenoid/Spring , / NPT / NPT Flange G / G / Flange Solenoid/Solenoid , / NPT / NPT Flange 9700 *) When ordering please indi ate solenoid, voltage and current type (frequency). *) Below -0 C must be >, bar Option selector Function / way, spring return (/ way 0 spare adaptor plate supplied) / way, solenoid return (/ way spare adaptor plate supplied) Ports size G / 0 / NPT Voltage V d.c V a.c. 0.0 Solenoid actuators see table / 00-c without notice, the specifications given in this document. 0 Norgren GmbH N/en..8.0

2 9700 NAMUR Solenoid operators Power consumption V d.c. 0 V a.c. (W) (VA) Rated current V d.c. 0 V a.c. (m A) (m A) Ex-Protection IP-Protection class (to EN 609) Ex-Protection (ATEX-Category) Temperature Ambient/Fluid,8 70 IP 6 (with connector) Connector DIN EN Form B *6) ( C) Electrical connection Weight Dimension Circuit diagram Model (kg) Nr. Nr. 0, 00,6, 0 IP 6 (with connector) Connector DIN EN Form A *6) 0, 06 8 IIG IID,0 8 IIG IID,7 IIG IID Ex na IIC T Gc Ex tc IIIC T9 Dc IP 6 (with connector) Ex na IIC T Gc Ex tc IIIC T9 Dc IP 6 (with connector) Ex mb IIC T Gb Ex mb tb T9 C Db IP6 (with connector) With special connector DIN EN Form A With special connector DIN EN Form A 0, 06 0, m cable 0, 06, 9 IIG IID Ex mb IIC T Gb Ex mb tb T9 C Db mit m Kabel,7 IP 66 (with connector) Connector Mx, DIN IEC *6) m cable 0, 06 0, 7 07 Standard voltages (±0%) V d.c., 0 V a.c. Further versions on request. *6) Connector is not scope of delivery, see table»accessories«solenoid with yellow LED Approvals Model Approvals Datasheet ATEX IECEx FM 0x PTB 06 ATEX 0 N/de x PTB 0 ATEX 0 N/en x EC-Declaration of Conformity N/en 7..6 N/en..8.0 without notice, the specifications given in this document. 0 Norgren GmbH 00-c /

3 9700 NAMUR Accessories Connector DIN EN Connector M x M x 0707, form A 00 (without cable) 006 (90, without cable) , form B 007 ( m cable) 008 (90, m cable) 00 ( m cable) 00 (90, m cable) Silencer Throttle control plate Flange plate Yoke Page 6 Page 6 Page & 6 Page 6 C/S / NPT (NAMUR single connection plate) 009 M/S G / 0679 (NAMUR-rip use in combination with 06790) Dimensions Valves,, 6,, ø, 6, 7, 0 Ø, 6, 7, 0 0, 0 Manual override Solenoid operator Coding stud Port size G/ or / NPT / 00-c N/en..8.0 without notice, the specifications given in this document. 0 Norgren GmbH

4 9700 NAMUR Dimensions Solenoid operators , 6 Ø9 Ø9 9 8, 0 9,, 9, 9, Mx ~8 0 9,, M6 X, 8 Ø9 Connector x 90 turnable Electrical connection M x Pin Signal Cable + UB brown Out (PNP) / analogue to 0 ma white 0 Volt blue Out (PNP) black N/en..8.0 without notice, the specifications given in this document. 0 Norgren GmbH 00-c /

5 9700 NAMUR Circuit diagrams 7 NAMUR hole pattern (driving side) Conversion instructions of / into / way function M / way function / way function Port (A) Coding stud threaded M (0 deep) Port (R) 7 / / resp. / way function can be achieved just by swapping enclosed adaptor plates. Make sure marker and arrow do match as shown on above drawing. Original mode of supply: / function Arrow 7 Marker / 6 NAMUR quick exhaust module for a better kv-value by exhaust see data sheet..80 NAMUR interlinking plates in redundancy design for»safety exhausting«and»safety ventilating«see data sheet..80 Single connection plate Model: , (x), G / 9,, 6 ø, ø 9, 9 G / ø 9 ø, 7 / 00-c N/en..8.0 without notice, the specifications given in this document. 0 Norgren GmbH

6 9700 NAMUR NAMUR slot Model: 0679 Yoke Model: 009 Throttle control plate Model: 009 9,, 6 x 9,, 0 76, ,, B B, A A Silencer Model: M/S, C/S, 8 ø, / Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in pneumatic systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. N/en without notice, the specifications given in this document. 0 Norgren GmbH 00-c /