Pneumatics CONTENT
|
|
|
- Ernest Summers
- 6 years ago
- Views:
Transcription
1 Pneumatics CONTENT Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators & Lubricators 527 Air Ring Main System 54 4
2 Cylinder Problem? The Solution Is Here..... The Fastest Cylinder Breakdown Service Replacements made in as little as one hour! Standard and Non-Standard Strokes Includes Many Cylinder Types Totally Flexible Delivery and Collection Options 452
3 Pneumatics FITTINGS PRODUCT INDEX Page Super-Rapid Compact TM 454 Fittings in Technopolymer Super-Rapid Push-In 457 Fittings for Plastic Tubes Super-Rapid Push-On 460 Fittings for Plastic Tubes Compression Fittings 464 BSP Adaptors Sprint 466 BSP Adaptors 466 UK: ROI:
4 Super-Rapid Compact TM Fittings in Technopolymer Tube external: Ø Connections M5, M7, /8, /4, 3/8, /2, 3/4 Manufactured in technopolymer these fittings maintain the same technical characteristics as the existing fittings range. Lightweight and adaptable they allow for easy maintenance of the collet and the internal seal. All materials, with the exception of the internal seals, can easily be recycled M M / / M M / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / M / M / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
5 Pneumatics FITTINGS Super-Rapid Compact TM Fittings in Technopolymer - continued / / / / / / / / / / / / / / / / / / / / / / / / / / / UK: ROI:
6 Super-Rapid Compact TM Fittings in Technopolymer - continued
7 Pneumatics FITTINGS Super-Rapid Push-In Fittings For Plastic Tubes Tube OD Connections: M5, /8, /4, 3/8, /2 This range of super-rapid push-in fittings includes the unique Sprint sealing system. Note: with O-Ring Male Stud S /8 S /4 S /8 S /4 S /8 S /4 S /8 S /4 S /8 S /4 S /8 S /2 S /4 S /8 S /2 S /8 S /2 S /2 S /4 Male Stud M M / / M M / / / / / / / / /8 Female Stud M / / / / / / /4 Swivel Elbow S /8 S /4 S /8 S /4 S /8 S /4 S /8 S /4 S /8 S /4 S /8 S /2 S /4 S /8 S /2 S /8 S /2 Note: with O-Ring Note: with 266 Nylon Ring Swivel Elbow M / / M M / / / / / / / / /8 Fixed Male Elbow - Taper S /8 S /4 S /8 S /4 S /8 S /4 S /8 S /4 S /8 S /4 S /8 S /4 S /8 Fixed Male Elbow - Parallel M5 Extended Swivel Elbow / / / /4 Swivel Branch Tee S /8 S /8 S /4 S /8 S /4 S /8 S /4 S /8 S /4 S /8 S /2 S /4 S /8 S /2 S /2 UK: ROI:
8 Super-Rapid Push-In Fittings For Plastic Tubes - continued Swivel Branch Tee M / M / / / / / / / / /8 Note: with O-Ring Swivel Run Tee S /8 S /8 S /4 S /8 S /4 S /8 S /4 S /8 S /4 S /8 S /8 S /2 Swivel Run Tee M / M / / / / / / / / /8 Note: with O-Ring Fixed Y Connector M M5 Swivel Y Connector S /8 S /8 S /8 S /4 Note: with O-Ring Note: with O-Ring Banjo ring connector required for M5 versions of SCU, MCO, SVU, MVU, SCO and MCO * assembly required with 635 Single Banjo M / / / / / /4 Double Banjo / / / / / /4 Single Banjo Ring M M / M M / M M / / / / / /4* /8* /2* Stem Adaptor M / / / / / / / / / / / /
9 Pneumatics FITTINGS Super-Rapid Push-In Fittings For Plastic Tubes - continued Double Banjo Ring Connector M / / / / /4 Tube to Tube Connector Bulkhead Connector Equal Tube Elbow Equal Tube Tee Equal Tube Y Equal Tube Cross Connector Press Fit Cartridge Tube Blanking Cap Blanking Plug (plastic) Tube Stem Reducer UK: ROI:
10 Super-Rapid Push-In Fittings For Plastic Tubes - continued Tube Stem Increaser Straight Stem Tube to Stem Elbow Dust Cover Rapid Push-On Fittings For Plastic Tubes Tubes OD 5/3-6/4-8/6-0/8-2/0-5/2,5 Connections: M5, M6, M2x.25, M2x.5, /8, /4, 3/8, /2 The Pirtek range of rapid push-on fittings are designed to assist with the assembly of fluid power components and systems. Male Stud - Taper 50 5/3 - /8 50 6/4 - /8 50 6/4 - /4 50 6/4-3/8 50 6/4 - /2 50 6/4 - M2x /6 - /8 50 8/6 - /4 50 8/6-3/8 50 8/6 - /2 50 0/8 - /8 50 0/8 - /4 50 0/8-3/8 50 0/8 - /2 50 2/0-3/8 50 2/0 - /2 50 5/2.5 - /2 Male Stud - Parallel 5 5/3 - M5 5 5/3 - M6 5 5/3 - /8 5 6/4 - M5 5 6/4 - M6 5 6/4 - /8 5 6/4 - /4 5 6/4-3/8 5 8/6 - /8 5 8/6 - /4 5 8/6-3/8 5 0/8 - /8 5 0/8 - /4 5 0/8-3/8 5 0/8 - /2 5 2/0-3/8 5 2/0 - /2 5 5/2.5 - /
11 Pneumatics FITTINGS Rapid Push-On Fittings For Plastic Tubes Male Stud Swivel 560 6/4 - / /4 - / /6 - / /6 - / /8 - / /8-3/ /0-3/8 Female Stud 463 5/3 - / /4 - / /4 - / /4-3/ /6 - / /6 - / /6-3/ /8 - / /8 - / /8-3/ /8 - / /0-3/8 Swivel Elbow 54 6/4 - /8 54 6/4 - /4 54 8/6 - /8 54 8/6 - /4 54 0/8 - /4 Note: with 266 Nylon Ring Fixed Stud Elbow - Parallel 50 5/3 - M5 Fixed Male Elbow - Taper 500 5/3 - / /4 - / /4 - / /4-3/8 50 6/4 - M2x /6 - / /6 - / /6-3/ /6 - / /8 - / /8 - / /8-3/ /8 - / /0-3/ /0 - / /2.5 - /2 Fixed Female Elbow 493 6/4 - / /4 - / /6 - / /6 - / /8 - / /0-3/8 Swivel Branch Tee 43 6/4 - /8 43 6/4 - /4 43 8/6 - /8 43 8/6 - /4 43 0/8 - /4 Fixed Branch Tee - Taper 40 5/3 - /8 40 6/4 - /8 40 6/4 - /4 40 8/6 - /8 40 8/6 - /4 40 0/8 - /8 40 0/8 - /4 40 0/8-3/8 40 0/8 - /2 40 2/0-3/8 40 2/0 - /2 40 5/2.5 - /2 Fixed Run Tee - Taper 420 5/3 - / /4 - / /4 - / /6 - / /6 - / /8 - / /8 - /4 UK: ROI:
12 Rapid Push-On Fittings For Plastic Tubes Note: with 266 Nylon Ring Note: with 266 Nylon Ring Banjo ring connector required for M5 versions of SCU, MCO, SVU, MVU, SCO and MCO * assembly required with 635 Banjo Assemblies 52 5/3 - M5 52 5/3 - /8 52 6/4 - M5 52 6/4 - /8 52 6/4 - /4 52 6/4-3/8 52 8/6 - /8 52 8/6 - /4 52 8/6-3/8 50 8/6 - /2 Banjo Assemblies 525 6/4 - / /4 - / /4-3/ /6 - / /6 - / /6-3/ /8 - / /8 - / /8-3/ /8 - / /0-3/ /0 - / /2.5 - /2 Single Banjo Ring Connector 60 5/3 - M5 60 5/3 - M6 60 5/3 - /8 60 6/4 - M5 60 6/4 - M6 60 6/4 - /8 60 6/4 - /4 60 6/4-3/8 60 8/6 - /8 60 8/6 - /4 60 8/6-3/8 60 0/8 - /8* 60 0/8 - /4* 60 0/8-3/8* 60 0/8 - /2* 60 2/0-3/8* 60 2/0 - /2* 60 5/2.5 - /2* Double Banjo Ring Connector 620 6/4 - M /4 - / /4 - / /6 - / /6 - /4 Single Banjo Bolt (up to & incl 8mm) M / / / /2 Double Banjo Bolt (up to & incl 8mm) / / /8 Double Banjo Bolt(8mm & above) / / / /2 Triple Banjo Bolt(up to & incl 8mm) / / /8 Single Banjo Bolt (8mm & above) / / / / M2x M2x
13 Rapid Push-On Fittings For Plastic Tubes Pneumatics FITTINGS Tube to Tube Connector 580 5/ / /6-6/ / /8-6/ / / /2.5 Bulkhead Tube Connector 590 5/ /4-5/ / /6-6/ / / /0 Equal Tube Elbow 550 6/ / / / /2.5 Equal Tube Tee 540 5/ / /6-6/ / /8-6/ /8-8/ / / /2.5 Equal Tube Cross 600 6/ /6 Tube Stem Adaptor 470 6/ /6-8 Plastic Blanking Cap 70 5/3 70 6/4 70 8/6 70 0/8 70 2/0 Useful for blanking off or testing purposes Aluminium Washer 265 /8 265 / /8 265 /2 Nylon Spacer 5mm 2665 / / / /2 Tube Nut 703 5/3 - M7x /4 - M8x /4 - M0x 703 8/6 - M2x 703 0/8 - M4x 703 2/0 - M6x 703 5/2.5 - M20x Anti Kink Tube Nut 723 6/4 - M0x 723 8/6 - M2x 723 0/8 - M4x 723 2/0 - M6x 723 5/2.5 - M20x Nylon Washer 266 M3 266 M5 266 M6 266 /8 266 / /8 266 /2 Nylon Spacer 9mm 2669 / / / /2 UK: ROI:
14 Compression Fittings Tube OD Connections: /8, /4, 3/8, /2. This range of compression fittings are designed to assist with the assembly of fluid power components and systems. Male Stud - Taper / / / / / / / / / / / /2 Female Stud / / / / /4 Fixed Male Elbow - Taper / / / / / / / / / / / /2 Fixed Female Elbow / / / / /4 Fixed Branch Tee - Taper / / / /4 Fixed Run Tee - Taper / / / /4 Tube to Tube Connector Bulkhead Connector Equal Tube Elbow Equal Tube Tee Single Banjo Ring Connector / / /8* * assembly required with 635 Tube Nut / / / / /
15 Compression Fittings - continued Pneumatics FITTINGS Olive * *biconical Tube Insert BSP Adaptors Sprint Connections: /8, /4, 3/8, /2 The more popular versions of the Camozzi BSP adaptors are now available with the unique Sprint sealing system. Nipple - Taper S2500 /8 S2500 /4 S2500 3/8 S2500 /2 Reducing Nipple - Taper S250 /8 - /4 S250 /8-3/8 S250 /4-3/8 S250 /4 - /2 S250 3/8 - /2 Adaptor - Taper S2520 /8 - /8 S2520 /8 - /4 S2520 /8-3/8 S2520 /4 - /4 S2520 /4-3/8 S2520 /4 - /2 S2520 3/8-3/8 S2520 3/8 - /2 S2520 /2 - /2 Reducing Bush - Taper S2530 /4 - /8 S2530 3/8 - /8 S2530 /2 - /8 S2530 3/8 - /4 S2530 /2 - /4 S2530 /2-3/8 Swivel Adaptor 254 /8 - /8 254 /4 - / /8-3/8 Male Elbow - Taper S200 /8 S200 /4 S200 3/8 S200 /2 Male/Female Elbow - Taper S2020 /8 - /8 S2020 /4 - /4 S2020 3/8-3/8 S2020 /2 - /2 Y Connector - Taper S2040 /8 - /8 S2040 /4 - /4 S2040 3/8-3/8 S2040 /2 - /2 UK: ROI:
16 BSP Adaptors Sprint Female Run Tee - Taper S2050 /8 - /8 S2050 /4 - /4 S2050 3/8-3/8 S2050 /2 - /2 Male Branch Tee - Taper S2060 /8 - /8 S2060 /4 - /4 S2060 3/8-3/8 S2060 /2 - /2 Male Run Tee - Taper S2070 /8 - /8 S2070 /4 - /4 S2070 3/8-3/8 S2070 /2 - /2 Equal Male Tee - Taper S2080 /8 S2080 /4 S2080 3/8 S2080 /2 Female Branch - Taper S2090 /8 - /8 S2090 /4 - /4 S2090 3/8-3/8 S2090 /2 - /2 Male Plug S260 /8 S260 /4 S260 3/8 S260 /2 Male Plug - Flush Fitting - Parallel S265 /8 S265 /4 S265 3/8 BSP Adaptors Connections: M5, /8, /4, 3/8, /2, 3/4 and. This range of BSP adaptors and hose tails are designed to assist with the assembly of fluid power components and systems. Nipple - Taper 2500 / / / / / Nipple - Parallel 250 M5 250 /8 250 / /8 250 /2 Reducing Nipple - Taper 250 /8 - /4 250 /8-3/8 250 /4-3/8 250 /4 - / /8 - /2 250 /2-3/4 Reducing Nipple - Parallel 25 M5 - /8 25 /8 - /4 25 /8-3/8 25 /4-3/8 25 /4 - /2 25 3/8 - /
17 BSP Adaptors Pneumatics FITTINGS Adaptor - Taper 2520 /8 - / /8 - / /8-3/ /4 - / /4-3/ /4 - / /8-3/ /8 - / /2 - /2 Adaptor - Parallel 252 M5 - /8 252 /8 - /8 252 /8 - /4 252 /8-3/8 252 /4 - /4 252 /4-3/8 252 /4 - / /8-3/ /8 - /2 252 /2 - /2 Extension Piece - Parallel 2525 / / / /4-43 Reducing Bush - Taper 2530 /4 - / /8 - / /2 - / /8 - / /2 - / /2-3/ /4 - / /4 Reducing Bush - Parallel 253 /8 - M5 253 /4 - / /8 - / /8 - /4 253 /2 - /8 253 /2 - /4 253 /2-3/8 Female Connector 2543 M / / / /2 Female Reducer 2553 M5 - / /8 - / /8-3/ /8 - / /4-3/ /4 - / /8 - /2 Blanking Plug - Parallel 26 M5 26 /8 26 /4 26 3/8 26 /2 Blanking Plug - Taper 260 3/4 Blanking Nut - Parallel 263 /8 263 / /8 263 /2 Hose Tail - Parallel M M / / / / / / / / / / /2 Male Elbow - Taper 200 /8 200 / /8 200 / /4 200 Female Elbow 203 /8 203 / /8 203 /2 UK: ROI:
18 BSP Adaptors Male/Female Elbow - Taper 202 M5 - M /8 - / /4 - / /8-3/ /2 - /2 Female Run Tee - Taper 2050 /8 - / /4 - / /8-3/ /2 - /2 Male Branch Tee - Taper 2060 /8 - / /4 - / /8-3/ /2 - /2 Male Run Tee - Taper 2070 /8 - / /4 - / /8-3/ /2 - /2 Equal Male Tee - Taper 2080 / / / /2 Female Branch Tee - Taper 2090 /8 - / /4 - / /8-3/ /2 - /2 Equal Female Tee 2003 / / / /2 Y Connector - Taper 2040 /8 - / /4 - / /8-3/ /2 - /2 Banjo ring connector required for M5 versions of SCU, MCO, SVU, MVU, SCO and MCO * assembly required with 635 Female Y Connector 2043 / / / /2 Female Equal Cross 2033 / / /8 Banjo Ring Connector 2023 M5 - M M5 - M /8 - / /4 - /4* /8-3/8* Bulkhead Fitting Parallel 2593 M6 - / M20 - / M26-3/ M28 - /2 Hexagon Locking Nut - BSPP 253 /8 253 / /8 253 /2 Hexagon Locking Nut - Metric 593 M2x 593 M20x
19 Pneumatic Fitting Kits Pneumatic First Aid Kit Contains Wide Range of Most Popular Fittings 4mm - 2mm Fitting Boxes Each Box Specialises in One Size (4mm - 2mm) UK: ROI:
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
Fittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
connection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
LF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
ONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
Fittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
FIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
Composite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
LF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
Super-rapid fittings Series X6000 in Stainless Steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in Stainless Steel 316L CATALOGUE > s 2012 Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2),
in stainless steel 316L
> Super-rapid fittings Series X6000 Super-rapid fittings Series X6000 in stainless steel 316L Tube external diameters:, 6, 8, 10, 12 mm Fittings threads: BSP (G1/8, G1/, G3/8, G1/2), BSPT (R1/8, R1/, R3/8,
37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
Local solutions for individual customers worldwide PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES STAUFF UK. Super Air Service!
Local solutions for individual customers worldwide STAUFF UK PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES www.stauff.co.uk PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES Tube Connectors In Line Flow Control
Standard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
PRODUCT DIRECTORY OUR GENIUS IS FITTINGS. Issue 1. Nickel Plated Brass BSP Fittings. Compression Fittings
Issue 1 PRODUCT DIRECTORY Compression Fittings Sistem-P Push-in Fittings Compact Push-in Fittings Nickel Plated Brass BSP Fittings Air Valves Silencers Tubing OUR GENIUS IS FITTINGS www.wadefittings.com
A Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
LF 3800/LF 3900 Push-In Fittings Range
LF 300/LF 3900 Push-In Fittings Range Stud Fittings Straights 305 3905 BSPT Page 1-79 305 Page 1-79 301 3901 BSPP/Metric Page 1-79 321 3921 BSPT Page 1-0 321 3921 Page 1-0 331 3931 BSPP/Metric Page 1-0
Hyva Hoses & Adapters Introduction
Introduction Hyva Hoses Hoses offered by HYVA comply with the highest safety standards for truck hydraulics. Working pressures range from 225 to 350 bar. Code system hydraulic hoses Hose 1 H.P. 16-2000
ARB AIR LOCKER Air Operated Locking Differentials
170102 Bulkhead Fitting Kit, 5mm to 3/16 Specs: 02 1 OUTER COMPRESSION NUT (5mm) 170602 Internal Tube Size 3/16 05 1 CNTRL COMPRESSION NUT (5mm to 3/16 ) 170604 07 1 FERRULE (3/16 ) 170606 3 08 1 INNER
stainless steel compression fittings
compression fittings principle of compression fittings egris has used its long experience of brass compression fittings to develop a range of compression fittings. These fittings are resistant to aggressive
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK. This work covers part of outcome 2 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PIPE WORK This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome 2 is
Spare parts list. Hydraulic Power Pack PAC P 18. Chicago Pneumatic Construction Tools
Spare parts list Hydraulic Power Pack PAC P 18 www.cp.com Chicago Pneumatic Construction Tools Spare parts list PAC P 18 2008-06 No. Copyright Chicago Pneumatic Construction Tools STOCKHOLM SWEDEN PAC
Composite Right Angle Flow Control Valves BSP/Metric Series PSCU, PMCU, PSVU, PMVU, PSCO, PMCO
Flow Control Valves BSP NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Composite Right Angle Flow Control Valves BSP/Metric Series PSCU, PMCU, PSVU, PMVU, PSCO, PMCO Non-Swivel Design:
Complete Range of Movement Solutions
Complete Range of Movement Solutions A complete range of Movement Solutions are available from your Local Pirtek Centre. ISO & VDMA Pneumatic Cylinders Compact Cylinders Guided Cylinders Non-Standard Cylinders
Servicing the Tool. Service Kit SERVICE KIT. For all servicing we recommend the use of the service kit (part number (S)).
Servicing the Tool Service Kit For all servicing we recommend the use of the service kit (part number 07900-04750(S)). SERVICE KIT ITEM PART Nº DESCRIPTION Nº OFF ITEM PART Nº DESCRIPTION Nº OFF 07900-00002
quality industry solutions
quality industry solutions JSG Industrial Systems HOSE, TUBE & CONNECTION FITTINGS CATALOGUE 2017 JSG INDUSTRIAL SYSTEMS Since its inception in 1968, JSG Industrial Systems has been a proud supplier of
HOSE, TUBE & CONNECTION FITTINGS CATALOGUE. JSG Industrial Systems quality industry solutions. Fire Suppression Systems. Flow Measurement Systems
HOSE, TUBE & CONNECTION FITTINGS CATALOGUE JSG Industrial quality industry solutions Lubrication Management Material Dispensing Management Hose & Cable Management Diesel & Fluid Management Fire Suppression
COUPLINGS, VALVES AND TUBING DELTA FLUID PRODUCTS LIMITED
Wade COUPLINGS, VALVES AND TUBING DELTA FLUID PRODUCTS LIMITED DELTA FLUID PRODUCTS LTD Delta Fluid Products have been associated with the manufacturing of Valves and Fittings for Fluid and Gases for over
Lubrication Systems. Section 26
Lubrication Systems Section 26 26-1 INFORMATION - SYSTEMS The Lincoln QuickLub is an automated and centralised lubrication system that can improve productivity and extend the service life of your plant.
Reservedele Parts Catalogue November 2015
Reservedele Parts Catalogue November 2015 Distribution: Impact is a trademark (TM) belonging to Linemark UK. E. Marker A/S Okslundvej 8, Bov DK-6330 Padborg Tel.: +45 74 67 08 08 E-mail: info@emarker.dk
?????? Part No Part No. 20SF 30SF 40SF 20SM 30SM 40SM 20SH 30SH 40SH. Part No.
Jamec Pem 310 Series Couplers Single button operation. Will pass approximately 30cfm at 100psi. Jamec Pem 330 Series Adaptors?????? 13.0980 13.0985 13.0990 13.0950 13.0965 13.0970 13.0975 13.0930 13.0935
Ferulok Flareless Bite Type Fittings
Flareless Bite Type Fittings Flareless SAE 080101 / Flareless Flareless SAE 080601 / Flareless Flareless SAE 080102 / NPTF Flareless SAE 080120 / SAE-ORB Flareless SAE 080103 / NPTF Flareless SAE 080221
Spare parts list. Hydraulic Power Pack PAC D 10. Chicago Pneumatic Construction Tools
Hydraulic Power Pack www.cp.com Chicago Pneumatic Construction Tools 2008-06 No. Copyright Chicago Pneumatic Construction Tools STOCKHOLM SWEDEN Introduction Welcome! Protect your investment in the world
Spare parts list. Hydraulic Power Pack PAC P 13. Chicago Pneumatic Construction Tools
Spare parts list Hydraulic Power Pack PAC P 13 www.cp.com Chicago Pneumatic Construction Tools Spare parts list PAC P 13 2008-10 No. Copyright Chicago Pneumatic Construction Tools STOCKHOLM SWEDEN PAC
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
SUMMARY STAINLESS STEEL FITTINGS FITTINGS P PUSH-IN FITTINGS, STAINLESS STEEL D3.2 P STANDARD FITTINGS SERIES XA D3.8 P QUICK FITTINGS SERIES XC D3.
SUMMARY STAINLESS STEEL D3 P PUSH-IN, STAINLESS STEEL D3.2 P STANDARD SERIES XA D3.8 P QUICK SERIES XC D3.11 SUMMARY STAINLESS STEEL D3.1 PUSH-IN, STAINLESS STEEL The push-in fittings in the XR can be
Due to changed market conditions and cost changes on a range of products we have to adjust gross prices for the parts affected.
Price changes valid as of April 1 st 2012 Due to changed market conditions and cost changes on a range of products we have to adjust gross prices for the parts affected. Products listed in table Range
EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199
Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules
BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00
SOLDER RING FITTINGS GENERAL RANGE
Product Guide Size Pk Pk Code SOLDER RING FITTINGS GENERAL RANGE Fittings are manufactured from and alloy Available in sizes from 8-4mm Fittings are designed for jointing tubes to BS EN 7 in hot and cold
6. Parts & Assembly Table of contents
6. Parts & Assembly Table of contents General Assembly... 28 3m Complete Assembly... 28 3.5m Complete Assembly 30 4m Complete Assembly... 32 5m Complete Assembly... 34 Drawbar Assembly... 36 Lift axle
FITTINGS, CONTROLS AND ACCESSORIES
, CONTROLS AND ACCESSORIES Regardless of your application, Norgren has fittings and accessories to complete your pneumatic package. Norgren has an extensive lineup of Pneufit push-in fittings in metric
Specialty Fluid Fittings
Buyers guide Specialty Fluid Fittings for lubrication systems FEATURING Couplings & s Adapters Compression fittings Check valves Meter and control units bijur.com B r6-06 Buyer's guide to specialty fluid
Pneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
Prestolok 2. Push-in fitting. Catalogue UK
Prestolok Push-in fitting Index Straight connectors male - SPT F3P - p. 6 male - SPP F4P - p. 6 male - metric F8P - p. 7 female - SPP G4P - p. 7 union HPK - p. 7 unequal union HPK - p. 7 90 elbows adjustable
LIQUIfit Push-In Fittings with Metal Adaptors
LIQUIfit Push-In Fittings with Metal Adaptors The LIQUIfit range now benefits from a range extension of metal adaptors designed for liquid transfer applications. These fittings ensure reliable and compact
TL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97
Fuel Section Fuel Page 9-1 Fuel Tank Between The Rails Page 9-2 Fuel Fuel Tank Between The Rail Item Part Num. Number Qty. Description Notes 1 61360662 1 Elbow, 90 o, 1/2" NPT x 5/8" T 2 61270100 1 Sender
Miniature Regulator. Standard Specifications. Model IN side OUT side (Applicable tubing O.D.) Proof pressure Maximum operating pressure
Miniature Regulator Series 00F Compact and lightweight ( g) Low cracking pressure 0.0 MPa Standard model equipped with backflow function Standard Specifications Port size Fluid side side (Applicable tubing
Group 16. Fittings Brass - Galvanized, AISI Pneumatics
Group 16 Fittings Brass - Galvanized, AISI 316 - Pneumatics 16 INDEX Page Contents 2 Index 3-4 Low pressure AISI 316, Brass and Galvanized Malleable Iron ransitions and Nipples 5-6 Brass Fittings Series
funnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
VISIT OUR DISTRIBUTION & OPERATIONS CENTER
PUSH IN FITTINGS P V. P. W, P. V. W,, V,. T V I I, USA. W 75% ', V. I, V 300 USA P, M S D, C A, A M, F. T, V P. VISIT OUR DISTRIBUTION & OPERATIONS CENTER Vacuforce LLC 933 Western Drive Indianapolis IN
COUPLING CATALOGUE. Push-In, Standard, Conventional, Accessories
COUPLING CATALOGUE Push-In, Standard, Conventional, Accessories Coupling Catalogue Table of Content Push-in and Composite Building Block... 4 Standard Connectors... 12 Quick Connection Systems P5.... 16
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
Lamontite Securex Solder Ring Chrome Brazing Kingley Tools Flanges & GHD Valves Copper tube
Specialists in Plumbing Fittings Lamontite Securex Solder Ring Chrome Brazing Kingley Tools Flanges & GHD Valves Copper tube Specialists in Plumbing Fittings Tel: 04 558 882 04 558 5599 Fax: 04 558 9966
Raccordi gasolio forati 1 via. Connections eye no beat. Bicones brass joints. Fittings for braking and diesel systems
Raccordi gasolio forati 1 via Tipo di materiale: acciaio Filettatura metrica Code Desc. d x L x pace 1450000100 6x15x1 1450000195 8x16x1 1450000200 8x16x1,25 1450000210 10x23x1 1450000212 10x18x1,25 1450000214
Using a 4mm pin punch ( ) drive Trigger Pin 40 out and remove Trigger Assembly 39.
Servicing the Tool Rotary Valve Dismantling Using a mm pin punch (079000058) drive Trigger Pin 0 out and remove Trigger Assembly 39. Disconnect Hose Assembly 35 and remove Nut 3. Seperate Head Assembly
BRASS FITTINGS (R410a) BRASS FITTINGS
(R410a) R410a Short Barrel Flare Nuts 5010404410A 1/4 $4.21 5010808410A 1/2 $8.52 5010504410A 5/16fl x 1/4 tube $5.73 5011010410A 5/8 $13.50 5010606410A 3/8 $7.08 5011212410A 3/4 $20.54 BRASS FITTINGS
FLOW CONTROL VALVES & ACCESSORIES
TECHNICAL SPECIFICATIONS construction Valve group Materials Mounting Ports Position Operating temperature PNEUMATIC DATA Operating pressure Nominal pressure nominal flow needle-type Meter In, Meter Out,
General Assembly of Base Tool MkII
General Assembly of Base Tool 075-02200 MkII 8 60 2 SECTION ''-'' 25 2 9 50 51 5 5 52 TRIGGER VALVE DETAIL 20 6 7 HANDLE COVER DETAILS 8 2 7 8 10 1 5 6 9 11 20 19 18 16 15 1 12 17 1 21 2 22 5 7 5 PART
# Order nr article description quantity 110 MMA machine left side MMA machine right side MMA rotor 1 140
# Order nr article description quantity 110 MMA 01 070 110 machine left side 1 120 MMA 01 070 120 machine right side 1 130 MMA 01 070 130 rotor 1 140 MMA 01 070 140 hydraulic system 1 150 MMA 01 070 150
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
J-600. Parts catalog EDITION - 06/2007 CODE English version
J-600 English version EDITION - 06/007 CODE - 979 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 750-000 - Pompéia - SP - Brasil Tel.: +55 305-00 - Fax: +55 35 306 E-mail: export@jacto.com.br
HYDRAULIC BREAKER HAMMER HB 50 J HAMMER HB 50 L HAMMER HB 50 U
PARTS MANUAL ver. 1.1 PMHB50ENG.051011 HYDRAULIC BREAKER HB 50 J HB 50 L HB 50 U Serial No. TRK500005-UP TRK510005-UP TRK520005-UP TABLE OF CONTENTS 1. Housing unit 50J... 4 2. Housing unit 50L... 6 3.
SKY Refrigeration Brass Fittings. Forged Short Barrel Flare Nuts (Co 2. Forged Long Barrel Flare Nuts (Frost Free & Co 2
Forged Short Barrel Flare Nuts (Co 2 ) 13 SKY Item No. Item Description CO2 Pack qty 201-0404 1/4 SAE Yes 10 201-0504 5/16 SAE X 1/4 Tube Yes 10 201-0505 5/16 SAE Yes 10 201-0606 3/8 SAE Yes 10 201-0808
MULTI-K TOP COAT MULTI-COUPLING MULTI COUPLING. Tailor-made according to customer s needs Compact, reliable and safe PATENT PENDING
MULTI-K MULTI-COUPLING TOP COAT 107 PATENT PENDING DN 10 to 19 Tailor-made according to customer s needs Compact, reliable and safe 250 bar General features: ARGUS multi-couplings, which consist of a fixed
3 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO
Flow Control Valves NPTF NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO Swivel Design: Meter-Out, Meter-In
Pneufit C composite and Pneufit M fittings Inch
Pneufit composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad
Pneumatics. Air Motors. Automation. Pneumatics. Exelon 72 & 74 Series. Air Preparation
Page Norgren Solenoid Valves... 2908 Air Preparation... 2901 Tubing... 2907 Vacuum Pumps... 2906 Additional Products SMC Air Connectors... 2909 Air Preparation... 2907 Gauges... 2911 Instrumentation...
All offer prices are valid from 1st November until 30th November Prices exclude VAT. DON T MISS NOVEMBER S FANTASTIC OFFERS.
DON T MISS NOVEMBER S FANTASTIC S See pages 952-956 REINFORCED PVC BRAIDED HOSE FROM 5.94 Type RPVC (to BS6066) 1884 Heavy Duty, 30 Metre Coils Medium Duty, 30 Metre Coils 5000 5000 HDPVC14 6.5 1/4 11.5
Easy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
Betabite Fittings. Hardy Spicer, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph:
Betabite Fittings, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph: 1300 30 673 Disclaimer The information and dimensions listed in these catalogues is correct to the best of our knowledge
Air Brake Tubing and Coils
6 Air Brake Tubing and Coils Content - Section 6 Eurocoils Unicoils Air Coils Compact Coils Truck Coils Euroboom Rubber Air Hose Components Trace Nylon Imperial Nylon Metric Nylon 6.1 Air Brake Tubing
2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
STAINLESS STEEL CONDUIT SYSTEM WITH NPT THREADS
STAINLESS STEEL CONDUIT SYSTEM WITH NPT THREADS SILICONE GASKETS (FDA APPROVED) SMOOTH - EASY TO CLEAN (316) STAINLESS STEEL LID STAINLESS STEEL (316) BODY PATENTED 1 Stainless Steel NPT Conduit System
1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
Pipe fittings and tubing T, MPL, PNZ
Catalogue 2001 Pipe fittings and tubing T, MPL, PNZ Tube od ø4/2, 5/3, 6/4, 8/6, 10/8, 12/10, 14/12, 15/12,5 Connections M5, G1/8, G1/4, G3/8, G1/2 R1/8, R1/4, R3/8, R1/2, R3/4 7 When involved in factory
Model KD 710 KD 712 KD 714 Spare Parts List
Model KD 710 KD 712 KD 714 Spare Parts List Part No. KD1570063 From Serial No. CONTENTS Page No.. Contents... 2 Ordering Replacement parts... 3 Axle & Wheel... 4 Auger & Transmission... 6 2 Speed Gearbox...
Eclipse ES Air Compressor and Drive Service Parts List (Models ECL-200 and ECL-400)
Eclipse ES Air Compressor and Drive Service Parts List (Models ECL-200 and ECL-400) Document Number Index: Issue Date 02/19/14 See Page Rev. Date 1/24/18 Clutch Compressor Air Circuit Tubing Component
W Range Solder Ring Fittings
//7 TECH DATA SHEET 49 W Range Solder Ring Fittings Size Pk Pk Code MERCIA W RANGE SOLDER RING FITTINGS GENERAL RANGE Fittings are manufactured from and alloy Available in sizes from 8-4mm Fittings are
KOMATSU 30 Flare (Metric Threads)
KOMATSU 30 Flare (Metric Threads) KOMATSU (JIS 30 Flare Metric Thread) Connections / Identification JIS 30 Flare connections include series of inch (BSP) threads and metric threads. This section is dedicated
100 SERIES & 120 SERIES HOSE
INTRODUCTION MSA Stealth is the new way in performance plumbing. Its strong, lightweight and full-flow design leaves the competition behind. MSA Stealth has a large range of fittings, filters, tools and
PARTS LIST FOR VIPER VIPER
P-336 P-336 PARTS LIST FOR P-336-A P-336-A ILLUSTRATION OF SUB-ASSEMBLIES 6 3 1 5 2 4 P-336-A.1 P-336-A.1 For Codes: 10597 to 10635 Do Not use this Parts List for a machine if its code number is not listed.
Pneufit Push-in Tube Fittings Metric
Pneufit Push-in Tube ittings etric 4 14 mm O/ Very compact units asy insertion for rapid assembly of pneumatic circuits Positive anchorage ll P taper threads pre-coated with non-pt based sealant traight
SWINGTRIM Swingover Cutterbar Trimmer
Publication 117(PM) December 2007 Part No. 1090850 Revision: 2 SWINGTRIM Swingover Cutterbar Trimmer Parts Manual For best performance USE ONLY McCONNEL SERVICE PARTS To be assured of the latest design
CAFS Air Compressor Service Parts List Models 100-D, 120-D, 150-D, 200-D
Document Number Issue Date 3/18/15 Rev. Date 1/24/18 CAFS Air Compressor Service Parts List Models 100-D, 120-D, 150-D, 200-D Pump Models HL200K, HL300K, HL400K Index: See Pages Component Model 100-D,
Part/Assy 7527 ECN Ref S000000
Parts List Description Exhaust Manifold,Side Outlet(*) Part/Assy 7527 ECN Ref S000000 SAP Item Illustration RTP RTS Part No Catalogue No / Description Qty ECN 0001 1 X X 36609 MANIFOLD, EXHAUST, 4 CYL,
SAB 202 Screw compressor units. S pa re parts m an ual
SAB 202 Screw compressor units S pa re parts m an ual en 1 Spare parts list for SAB 202 Pos Designation No Part no Complete compressor LF, aut Vi 4161059 Complete compressor LF, man Vi 4161060 Complete
Tube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications
Self-align Fittings Series H, D,, Flared ridge ferrule Prevents accidental loss of ferrule when inserting tubing into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening
Volvo - Product Code 100,1,2, 4, 6, 7, 8, 9, 10 & 112
Volvo - Product Code 100,1,2, 4, 6, 7, 8, 9, 10 & 112 Item Description Product_ Code On Hand Qty 20460353 TEMPERATURE SENSOR 100 1 3854260 DISTRIBUTOR 100 1 3854001 COIL 100 1 876839 GASKET KIT 100 1 70326595
Airbrake Den Silverton Radiators
COMPANY INDEX CONTACT Airbrake Den Silverton Radiators Parts Catalogue 1 COMPANY The formation of the company was also aimed at harnessing the entrepreneurial flair, talent and a network of gifted professionals
$1.50 $3.00 U.S. &adaptors chart
$.50 $.00 U.S. &adaptors chart Our trained Quality Assurance Personnel follow a rigid inspection program to ensure that our fittings meet or surpass the strictest requirements of SAE. Quality Assurance