83 series Brass compression fittings Ø 1/ nominal pipe size, NPT thread
|
|
|
- Stella Benson
- 5 years ago
- Views:
Transcription
1 83 series rass compression fittings Ø /8..., NPT thread For use in areas of vibration Pre-assembled units No special assembly tools or heat required an be remade without damage to tube Suitable for use on seam welded as well as seamless tube or pipe Thinner tube can be used; as thin as 0,03 (0,8 ) wall thickness Lower torque requirement on the tube nut than fittings which bite into the tube Will cope with tube misalignment of ±4 Technical features Medium: ompressed air, water (plus other media suitable for use with materials of construction). Operating pressure: Typically up to 8 psi (5 bar) For applications above 8 psi (5 bar) bar contact Norgren technical service Ambient temperature: with HNR O -ring (yellow) Technical data Recoended nut torque settings Tube sizes ( see page for corresponding tube outside diameter): /8, /4, 3/8, /, 3/4,, /4, /, Thread sizes: /8, /4, 3/8, /, 3/4,, / (SPT and SPP) Tubing: Designed for use with: opper tube to S 87 Nylon PA (tube support required) stainless steel tube to AISI 304 and AISI 36 Nominal Recoended torque Tube Ø Recoended torque /8 0 Nm (5 ft.lb.) 50 Nm ( ft.lb.) /4 30 Nm ( ft.lb.) /4 300 Nm ( ft.lb.) 3/8 40 Nm (30 ft.lb.) / 30 Nm (9 ft.lb.) / 45 Nm (33 ft.lb.) 30 Nm (36 ft.lb.) 3/4 90 Nm (66 ft.lb.) Torque settings based on Railway applications up to 5 bar for use with stainless steel tube Testing & Approvals: PD 97/3/ Shock & vibration tested to N 6373 ategory (ogie mounted) Salt spray tested to ISO 97-06, data on request H Materials ody & nut: brass Washer & clampring: brass O -Ring: HNR colour coded yellow Tube stop position and tube outside diameter details Nominal Pipe O/D Pipe O/D H /8 0,405 0,3 8 /4 0,540 3,7 8,5 3/8 0,675 7, 0 / 0,840,3 0 3/4,050 6,7,5,35 33,4,5 /4,660 4, 7 /,900 48,3 5,375 60,3 35 Option selector Thread type Shape Pipe size 83 The information provided in this table are typical values as dimension H will vary slightly with torque applied to the nut. For fittings without tube stops such as straight connector and bulkheads the above tube insertion depths are also applicable Add V = optional FKM high temperature O -ring. Thread size/ 0/0 N/rw/en
2 Method of assembly A A A nsure that the end of the tube is cut square and is free from burrs.. Slide the nut () onto the pipe () from right to left. Slide the split ring (3) onto the pipe () from right to left keeping the smaller edge towards the nut (). Slide the washer (4) onto the pipe () from right to left. Slide the O -ring (5) onto the pipe () from right to left. N.. The pipe head must be deburred to ensure the O -ring is not damaged. 3. efore installing the pipe fittings, check that the pipes misalignement is not higher than ± 4 4. Move the pipe head (A) with all components asembled as shown towards the casing abutment (). In pipe fitings without abutment (), the pipe should be inserted as per the tube stop/abutment position listed below. 5. Move the four components from left to right and screw the nut () onto the pipe fitting casing (6). Straight adaptors and connectors Straight adaptor (taper) 8345 Female adaptor (taper) 8346 Straight union (equal) 8300 Straight union (unequal) 8300 ulkhead union 8309 ap 830 Straight stem connector (taper) 8345 Page 3 Page 3 Page 4 Page 4 Page 4 Page 4 Page 5 lbow connectors and adaptors Tee connectors and adaptors Union elbow (equal) Union elbow (unequal) lbow adaptor (taper) lbow adaptor female (taper) Union tee (equal) Union tee (unequal) Tee adaptor (taper) Tee adaptor female (taper) Page 5 Page 5 Page 6 Page 6 Page 7 Page 7 Page 7 Page 8 Accessories Tubing nut 830F4 Split ring 830J Tubing washer 8307 Tubing O -ring 8000K Thread O -ring ISO parallel thread 8000K Page 8 Page 8 Page 7 Page 8 Page 8 N/rw/en /0
3 Straight adaptor (taper) 8345 Female adaptor (taper) 8346 Dimensions shown in / NPT g /8" 0,3 /8" /8" 0,3 /4" /8" 0,3 3/8" /8" 0,3 /" /4" 3,7 /8" /4" 3,7 /4" /4" 3,7 3/8" /4" 3,7 /" /4" 3,7 3/4" /4" 3,7 " /8" 7, /4" /8" 7, 3/8" /8" 7, /" /8" 7, 3/4" /8" 7, " /",3 /4" /",3 3/8" /",3 /" /",3 3/4" /",3 " /4" 6,7 3/8" /4" 6,7 /" /4" 6,7 3/4" /4" 6,7 " /4" 6,7 /4" A8 " 33,4 /" " 33,4 3/4" " 33,4 " " 33,4 /4" A8 " 33,4 /" /4" 4, 3/4" /4" 4, " /4" 4, /4" A8 /4" 4, /" /4" 4, " /" 48,3 " /" 48,3 /4" A8 /" 48,3 /" /" 48,3 " " 60,3 /4" A8 " 60,3 /" " 60,3 " NPT g /8" 0,3 /8" /8" 0,3 /4" /8" 0,3 3/8" /8" 0,3 /" /4" 3,7 /8" /4" 3,7 /4" /4" 3,7 3/8" /4" 3,7 /" /4" 3,7 3/4" /4" 3,7 " /8" 7, /4" /8" 7, 3/8" /8" 7, /" /8" 7, 3/4" /8" 7, " /",3 /4" /",3 3/8" /",3 /" /",3 3/4" /",3 " /4" 6,7 /4" /4" 6,7 3/8" /4" 6,7 /" /4" 6,7 3/4" /4" 6,7 " /4" 6,7 /4" A8 3/4" 6,7 /" " 33,4 /" " 33,4 3/4" " 33,4 " " 33,4 /4" A8 " 33,4 /" /4" 4, 3/4" /4" 4, " /4" 4, /4" A8 /4" 4, /" /4" 4, " /" 48,3 " /" 48,3 /4" A8 /" 48,3 /" /" 48,3 " " 60,3 /4" A8 " 60,3 /" " 60,3 " /0 N/rw/en
4 Straight union (equal) 8300 ulkhead union 8309 Dimensions shown in / L g /8" 0, /4" 3, /8" 7, /", /4" 6, " 33, /4" 4, /" 48, " 60, Ø L g /8" 0, /4" 3, /8" 7, /", /4" 6, " 33, /4" 4, /" 48, " 60, ap 830 Straight union (unequal) 8300 øa Ø A g /4" 3,7 /8" 0, /8" 7, /8" 0, /8" 7, /4" 3, /",3 /4" 3, /",3 3/8" 7, /4" 6,7 /4" 3, /4" 6,7 3/8" 7, /4" 6,7 /", " 33,4 3/8" 7, " 33,4 /", " 33,4 3/4" 6, /4" 4, /", /4" 4, 3/4" 6, /4" 4, " 33, /" 48,3 " 33, /" 48,3 /4" 4, " 60,3 " 33, " 60,3 /4" 4, " 60,3 /" 48, g /8" 0, /4" 3, /8" 7, /", /4" 6, " 33, /4" 4, /" 48, " 60, N/rw/en /0
5 Straight stem connector (taper) 8345 Union elbow (equal) Dimensions shown in / NPT g /8" 0,3 /8" /8" 0,3 /4" /4" 3,7 /4" /4" 3,7 3/8" /4" 3,7 /" /8" 7, 3/8" /8" 7, /" /8" 7, 3/4" /",3 3/8" /",3 /" /",3 3/4" /",3 " /4" 6,7 3/8" /4" 6,7 /" /4" 6,7 3/4" /4" 6,7 " " 33,4 /" " 33,4 3/4" " 33,4 " " 33,4 /4" A8 " 33,4 /" /4" 4, " /4" 4, /4" A8 /4" 4, /" /4" 4, " /" 48,3 " /" 48,3 /4" A8 /" 48,3 /" /" 48,3 " " 60,3 " " 60,3 /4" A8 " 60,3 /" " 60,3 " g /8" 0, /4" 3, /8" 7, /", /4" 6, " 33, /4" 4, /" 48, " 60, Union elbow (unequal) Ø A g /4" 3,7 /8" 0, /8" 7, /8" 0, /8" 7, /4" 3, /" 3,3 /4" 3, /" 3,3 3/8" 7, /4" 6,7 /4" 3, /4" 6,7 3/8" 7, /4" 6,7 /" 3, " 33,4 /4" 3, " 33,4 3/8" 7, " 33,4 /" 3, " 33,4 3/4" 6, /4" 4, 3/4" 6, /4" 4, " 33, /" 48,3 " 33, /" 48,3 /4" 4, " 60,3 /4" 4, " 60,3 /" 48, øa 0/0 N/rw/en
6 90 lbow adaptor (taper) lbow adaptor female (taper) Dimensions shown in / NPT g /8" 0,3 /8" /8" 0,3 /4" /8" 0,3 3/8" /8" 0,3 /" /4" 3,7 /8" /4" 3,7 /4" /4" 3,7 3/8" /4" 3,7 /" /4" 3,7 3/4" /4" 3,7 " /8" 7, /4" /8" 7, 3/8" /8" 7, /" /8" 7, 3/4" /8" 7, " /",3 /8" /",3 /4" /",3 3/8" /",3 /" /",3 3/4" /",3 " /4",3 /4" /4",3 3/8" /4",3 /" /4",3 3/4" /4",3 " /4",3 /4" A8 3/4",3 /" " 33,4 /" " 33,4 3/4" " 33,4 " " 33,4 /4" A8 " 33,4 /" /4" 4, 3/4" /4" 4, " /4" 4, /4" A8 /4" 4, /" /4" 4, " /" 48,3 " /" 48,3 /4" A8 /" 48,3 /" /" 48,3 " " 60,3 /4" A8 " 60,3 /" " 60,3 " Ø K NPT g /8" 0,3 /8" /8" 0,3 /4" /8" 0,3 3/8" /8" 0,3 /" /4" 3,7 /8" /4" 3,7 /4" /4" 3,7 3/8" /4" 3,7 /" /4" 3,7 3/4" /8" 7, /4" /8" 7, 3/8" /8" 7, /" /8" 7, 3/4" /",3 /4" /",3 3/8" /",3 /" /",3 3/4" /",3 " /4" 6,7 3/8" /4" 6,7 /" /4" 6,7 3/4" /4" 6,7 " " 33,4 3/8" " 33,4 /" " 33,4 3/4" " 33,4 " " 33,4 /4" A8 " 33,4 /" /4" 4, " /4" 4, /4" A8 /4" 4, /" /" 48,3 " /" 48,3 /4" A8 /" 48,3 /" " 60,3 /4" A8 " 60,3 /" øk N/rw/en /0
7 Union tee (equal) Tee adaptor (taper) Dimensions shown in / g /8" 0, /4" 3, /8" 7, /", /4" 6, " 33, /4" 4, /" 48, " 60, Union tee (unequal) Ø A g /8" 0,3 /4" 3, /8" 0,3 3/8" 7, /4" 3,7 3/8" 7, /8" 7, /4" 3, /8" 7, /", /",3 /4" 3, /",3 3/8" 7, /",3 3/4" 6, /4" 6,7 /4" 3, /4" 6,7 3/8" 7, /4" 6,7 /", " 33,4 3/8" 7, " 33,4 /", " 33,4 3/4" 6, /4" 4, 3/4" 6, /4" 4, " 33, /" 48,3 " 33, /" 48,3 /4" 4, " 60,3 /4" 4, " 60,3 /" 48, øa NPT g /8" 0,3 /8", /4" 3,7 /8", /4" 3,7 /4", /4" 3,7 3/8", /4" 3,7 /", /8" 7, /4" 3, /8" 7, 3/8", /8" 7, /", /",3 /4" 3, /",3 3/8" 3, /",3 /" 3, /",3 3/4" 3, /4" 6,7 /" 3, /4" 6,7 3/4" 3, /4" 6,7 " 3, " 33,4 /" 4, " 33,4 3/4" 4, " 33,4 " 4, " 33,4 /4" 4, A8 /4" 4, " 4, /4" 4, /4" 4, A8 /4" 4, /" 4, /" 48,3 " 4, /" 48,3 /4" 4, A8 /" 48,3 /" 4, /" 48,3 " 4, " 60,3 /4" 5, A8 " 60,3 /" 5, " 60,3 " 5, Tubing washer 8307 for /8" 0,5, /4" 3,8, /8" 7,5, /",8, /4" 7, " 37, /4" 4, /" 48, " 60, /0 N/rw/en
8 Tee adaptor female (taper) Split ring 830J Dimensions shown in / Ø K g /8" 0,3 /8" /4" 3,7 /8" /4" 3,7 /4" /4" 3,7 3/8" /4" 3,7 /" /8" 7, /4" /8" 7, 3/8" /8" 7, /" /",3 /4" /",3 3/8" /",3 /" /",3 3/4" /4" 6,7 /" /4" 6,7 3/4" /4" 6,7 " " 33,4 /" " 33,4 3/4" " 33,4 " /4" 4, " /" 48,3 " øk for /8" 0, J000 /4" 3, J0400 3/8" 7, J0600 /", J0700 3/4" 7, 5,5 830J0900 " 34, J000 /4" 4,6 6,5 830J00 /" 48,5 6,5 830J00 " 60,4 8,5 830J300 Tubing O -ring HNR (yellow) 8000K For tube Ø /8 8,9,9 8000K000 /4,,7 8000K /8 6,9,7 8000K800 / 9,8 3,6 8000K /4 6, 3,6 8000K ,5 3,6 8000K3000 /4 40,6 5,3 8000K300 / 43,8 5,3 8000K300 59,8 5,3 8000K3300 Tubing nut 830F4 øa Thread O -ring ISO parallel thread HNR (yellow) 8000K for Ø A /8" 0,3 4, F4000 /4" 3, F /8" 7, 4, F40600 /",3 5, F /4" 6, F40900 " 33,4 8, F4000 /4" 4, 9, F400 /" 48, F400 " 60,3 3, F4300 For thread /8 8,9,9 8000K000 /4,,7 8000K /8 5,,7 8000K600 / 9,8 3,6 8000K /4 4,6 3,6 8000K500 30,8 3,6 8000K300 /4 37,5 5,3 8000K400A8 / 43,8 5,3 8000K ,5 5,3 8000K4008 N/rw/en /0
9 90 lbow adaptor female (taper) 83A446 øk NPT (g) /8" /8" A44608 /8" /4" A44608 /8" /8" A /8" /" A /4" /8" A /4" /4" A /4" /8" A /4" /" A /4" /4" A /8" /4" A /8" /8" A /8" /" A /8" /4" A /" /4" A /" /8" A /" /" A /" /4" A /" " A /4" /8" A /4" /" A /4" /4" A /4" " A " /8" A " /" A " /4" A " " A " /4" A4460A8 " /" A /4" " A /4" /4" A446A8 -/4" /" A4468 -/" " A /" /4" A446A8 -/" /" A4468 -/" " A4468 " /4" A4463A8 " /" A44638 " " A44638 Ø K Weight 0/0 N/rw/en
10 Union tee (equal) 83A060 (g) /8" A /4" A /8" A /" A /4" A " A /4" A /" A06000 " A Union tee (unequal) 83A060 øa Ø A Ø A Ø A (g) /8" /4" A /8" /8" A /4" /8" A /8" /4" A /8" /" A /" /4" A /" /8" A /" /4" A /4" /4" A /4" /8" A /4" /" A " /8" A " /" A " /4" A /4" /4" A /4" " A0600 -/" " A0600 -/" /4" A060 " /4" A0603 " /" A0603 N/rw/en /0
11 Tee adaptor (taper) 83A465 (g) NPT /8" /8" A46508 /4" /8" A /4" /4" A /4" /8" A /4" /" A /8" /4" A /8" /8" A /8" /" A /" /4" A /" /8" A /" /" A /" /4" A /4" /" A /4" /4" A /4" " A " /" A " /4" A " " A " /4" A4650A8 -/4" " A /4" /4" A465A8 -/4" /" A4658 -/" " A /" /4" A465A8 -/" /" A4658 -/" " A4659 " /4" A4653A8 " /" A46538 " " A /0 N/rw/en
12 Tee adaptor female (taper) 83A466 øk Ø K NPT (g) /8" /8" A46604 /4" /8" A /4" /4" A /4" /8" A /4" /" A /8" /4" A /8" /8" A /8" /" A /" /4" A /" /8" A /" /" A /" /4" A /4" /" A /4" /4" A /4" " A " /" A " /4" A " " A /4" " A /" " A /" /4" A466A8 " /4" A4663A8 " /" A46638 " " A46638 N/rw/en /0
13 Tubing nut 83A0F4 Split ring 83A0J øa Ø A for Ø A Ø A /8" A0F4000 /4" A0F /8" A0F40600 /" A0F /4" A0F40900 " A0F4000 -/4" A0F400 -/" A0F400 " A0F4300 Ø A for /8" A0J000 /4" A0J0400 3/8" A0J0600 /" A0J0700 3/4" A0J0900 " A0J000 -/4" A0J00 -/" A0J00 " A0J300 Tubing washer 83A07 Tubing O -ring for tube HNR (yellow) 8000K Ø A for /8" A07000 /4" A /8" A /" A /4" A " A /4" A0700 -/" A0700 " A07300 For tube Ø /8" K000 /4" K /8" K800 /" K /4" K30900 " K3000 -/4" K300 -/" K300 " K3300 Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under Technical features. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORRN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. 0/0 N/rw/en
83 series Brass compression fittings
> > Port size: Ø /8... 2, SPP and SPT thread > > For use in areas of vibration > > Pre-assembled units > > No special assembly tools or heat required > > an be remade without damage to tube Technical features
82 series Brass compression fittings
> > Port size: Ø 6... 42 mm tube size, SPP and SPT thread > > Suitable for use on seam welded as well as seamless tube or pipe > > For use in areas of vibration > > Pre-assembled units > > No special assembly
Compression Fittings 36 Series Metric
6 Series 4 mm 28 mm O/ l l l l Wide range of types and sizes Rugged and durable Suitable for use under extreme conditions of pressure and temperature Ideal for most general industrial applications Technical
Pneufit Push-in Tube Fittings Metric
Pneufit Push-in Tube ittings etric 4 14 mm O/ Very compact units asy insertion for rapid assembly of pneumatic circuits Positive anchorage ll P taper threads pre-coated with non-pt based sealant traight
Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
25000, 4/2 Direct solenoid actuated poppet valves
> > Port size: /4, /2 > > Working from 0 bar up > > Suited for outdoor installation > > Suitable for vacuum range down.33 0-2 mbar l/s > > : 65, Ex em, Ex d TEX approved (see solenoid table) Technical
Pneufit C composite and Pneufit M fittings Inch
Pneufit composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad
Male stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
Pneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
Tubing & Hose Metric. Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel
Tubing & Hose Metric Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel Available in a variety of different types to suit a wide range of applications
2oo2 with bypass valve exhaust guards and indicators. 2oo2 I4. N/en
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability Modular design - Maxseal valves ypass function enables valve removal online Stainless
stainless steel compression fittings
compression fittings principle of compression fittings egris has used its long experience of brass compression fittings to develop a range of compression fittings. These fittings are resistant to aggressive
ICO2S - 2/2, 3/2 or 5/2 Exia poppet valves Electromagnetically actuated, solenoid pilot operated
ICOS - /, / or 5/ Exia poppet valves > > Port size: /... / (ISO G/NPT) /... (Flanged) > > Zone 0, Exia solenoid pilot operated valve > > Safety integrity level and > > Reliable and long life, ideal for
FIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
Weight (kg) Dimension No. G1/4 Exhausting None 0,2 1 T F2BG *1) Interface Exhausting None 0,4 3 T10-N10-D2BN
T > > Port size: / or interface version > > Low operating forces > > High durability > > Easy installation, simple operation and maintenance free > > Full bore passage to maximise flow rate > > Wide pressure
Fittings Metal Push-To- Connect Fittings. We make things MOVE
Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating
Main Block Series. Concentrated Branching Joint for Assembly. Assembling Manifold Blocks for Concentrated Branching
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Concentrated ranching Joint for Assembly Main lock 310 Assembling Manifold locks for Concentrated ranching Same Flow Rate with
T84T - Excelon Plus Modular System 3/2 shut-off valve
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > 3/2 way function > Threaded exhaust port > Lockable in closed
T84T - Excelon Plus Modular System 3/2 shut-off valve
> Port size: 3/8" to 3/4" (PTF/ISO G) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > 3/2 way function > Threaded exhaust port > Lockable in
Minimal Fitting Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Ultra-Small arb Fitting for Pneumatic Piping Fitting 266 Suitable for Vacuum Piping by a Combination with Vacuum Tube Suitable
F84G - Excelon Plus Modular System General purpose filter
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > 5 or 40 micron particle and high efficiency water removal
SBM TECHNOLOGY Cooling / Air Recovery Valve
SBM TECHNOLOGY Cooling / Air Recovery Valve Part no. VSP15203x Advanced high pressure seal technology Integrated non-return valve Robust, compact & lightweight design Proven & reliable technology Maintenance
A44000, LINTRA-LITE Rodless Cylinders Non-magnetic and Magnetic Piston, double acting
> > Ø 25... 40 mm > > New compact, spacesaving design > > Proven sealing system > > Integral switch mounting > > uffer or adjustable cushioning > > Standard foot mountings Technical features Medium: Compressed
Prestolok 2. Push-in fitting. Catalogue UK
Prestolok Push-in fitting Index Straight connectors male - SPT F3P - p. 6 male - SPP F4P - p. 6 male - metric F8P - p. 7 female - SPP G4P - p. 7 union HPK - p. 7 unequal union HPK - p. 7 90 elbows adjustable
BL68 - Olympian Plus plug-in system Filter/regulators and lubricators
> > Port size: 3/4... /2 (ISO G/ PTF) > > Complete air processing units pre-assembled, ready to install Technical features Medium: Compressed air only Maximum operating pressure: 7 bar (246 psi) Pressure
connection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
ONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
Series 870 Sleeve coupling for repairs Sizes Ø 25, Ø 32, Ø 40, Ø 50
ouplings for polyethylene pipe series cert. n 0003 ISO 9001 LFFI 01037/03 G Function couplings, which are supplied in brass for diameters up to 63 mm and in cast iron for larger sizes, are used for connecting
Weight (kg) Model L92C- P-ETN. N/en
Excelon Pro Lubricator - Oil Fog ø 6... mm, G /8... G /8 Configuration flexibility Excellent value Low weight No tools required for assembly Technical features Medium: Compressed air Operating pressure:
Tube Fitting PP Series
http://www.pisco.co.jp FITTING ONTOLLE VALVE TUE MAKE-TO-ODE PODUTS Push-In Fitting Type for lean Environment Tube Fitting 178 opper alloy free material Nongrease lean-room packaging option hemical Industry
Pneumatic Connectors, Tubing & Cylinder Control Accessories
Pneumatic Pneumatic onnectors, Tubing & ylinder ontrol ccessories 290 G-ca Index Page No Push-in Fittings Overview.3 -.7 Push-in Fittings.8 -.22 Push-in Fitting Dimensions.23 -.47 ylinder ontrol ccessories
L84M, L84C - Excelon Plus Modular System Micro- and oilfog lubricator
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Flow sensor provides a nearly constant oil/air ratio over
M/44000/M. LINTRA Rodless cylinders Magnetic piston Double acting Ø 25 to 40 mm
LINTRA Rodless cylinders Magnetic piston Double acting Ø 5 to 40 mm New compact, space-saving design Proven sealing system Integral switch mounting Adjustable cushioning Magentic piston as standard Technical
F84C - Excelon Plus Modular System Oil removal filter
> Port size: 3/8... 3/4 (ISO G/PTF) > Light weight Polycarbonate bowl > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > High efficiency oil and
Pneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
ASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
COUPLING CATALOGUE. Push-In, Standard, Conventional, Accessories
COUPLING CATALOGUE Push-In, Standard, Conventional, Accessories Coupling Catalogue Table of Content Push-in and Composite Building Block... 4 Standard Connectors... 12 Quick Connection Systems P5.... 16
High pressure valves. 80 to 350 bar
80 to 350 bar High switchable p Hermetically sealed poppet valves Excellent repeatability of switching times Function even with lager voltage tolerance Compact design DN to DN 40 Technical data Medium:
Special valves. Logic components AND/OR Timer 2/2 way screw-in valves Miniature screw-in pressure regulators Relief valves
Contents Description Page Dual-pressure valve (AND) 3 OR valve (OR) 33 Timer 34, 35 / way screw-in valves 36, 37 Miniature screw-in pressure regulators 38, 39 Relief valves 40 Special valves Logic components
SentronicPLUS IO-Link CLASS A Electronic Pressure Regulator. Installation Manual
SentronicPLUS IO-Link CLASS A Electronic Pressure Regulator Installation Manual Sentronic PLUS ASCO NUMATICS Sentronic PLUS Electronic Pressure Regulator Sentronic PLUS is a 3-way proportional valve with
26230, NAMUR 3/2 & 5/2 Indirect solenoid actuated spool valves
60, 8007 NAMUR / & / > > Port size: G/ and NAMUR interface > > Easily interchangeable solenoid system > > For single and double operated actuators > > Standard manual override with detent > > Maintenance-free
Table Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
BV3H & BV4H True Multi-Way
6, PSI trunnion type with stock L/T/X ball patterns Supports high port-to-port ΔP ~ s from ¼" to " all DMI for pricing & availability if you require higher pressure or larger multi-way valves. DMI V3H
VCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
Light Coupling Series
http://www.pisco.co.jp FITTING ONTROLLER VALVE TUE MAKE-TO-ORDER PRODUTS Push-In Fitting oupling Light oupling 342 oupling with Push-In Fitting. Easy oupling and Uncoupling with One-Hand Operation. Suitable
LPRA/182000/M Double acting profile cylinders Ø mm
Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO
F84V - Excelon Plus Modular System Oil vapour removal filters
> Port size: 3/8... 3/4 (ISO G/PTF) > Light weight Polycarbonate bowl > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Adsorbing type activated
60 series, 2/2 or 3/2 Ball valve
60 series, / or 3/ > > Port size: Rp/8... Rp3, /8... > > Ideally suited for most general purpose applications > > Easy installation, simple operation and maintenance free > > 3-way ball valves with actuator
RM/900/M Heavy duty cylinders Ø 1 1/4... 4
Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting
Operating pressure (bar) kv factor (m 3 /h) *3)
/ poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar For
SBM TECHNOLOGY PET Blow Valve Block
Advanced high pressure seal technology Robust, compact & lightweight design Proven & reliable technology Maintenance & service friendly High flow rate exhaust function Minimal dead space volume (< 35ml)
Tube Fitting EG Series
FITTING ONTROLLER VALVE TUE MAKE-TO-ORDER PRODUTS Push-In Fitting Type for Anti-Static Environment 196 ESD Static dissipative Resin Suitable for Electrostatic dissipating and Antistatic Applications. Anti-spatter
37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
Tube Fitting Brass Series
http://www.pisco.co.jp FITTING ONTO VV TU MK-TO-OD PODUTS rass Push-In Fitting Type for Spatter-Proof Tube Fitting rass 212 N, FKM, N for Seal ubber Selection esistant to Flame and Weld Spatter Superior
26220, 26230, For single- and double-acting drives. Standard manual override with detent. Compact design. Exhaust air silencers.
60, 60, 8007 For single- and double-acting drives /, / and / Directional Control Valves Modular NAMUR design Actuation: Electromagnetic Indirectly controlled spool valves Connections G /8, G /, / NPT Standard
Tube Fitting Stainless SUS304 Series
http://www.pisco.co.jp FITTING ONTROLLR VALV TU MAK-TO-ORDR PRODUTS Push-In Fitting Type of orrosion Resistant Steel Tube Fitting 304 136 opper alloy free material Suitable for Strength Requirements /
VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control
VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional: serial interface with VP-Tool Software > > Optional
BL84 - Excelon Plus Modular System Filter/regulator - Lubricator Combination Units
BL84 - Excelon Plus Modular System > Port size: 3/8... 3/4 (ISO G/PTF) > Unique Quikclamp connection system offers full modularity > 40 micron particle and high efficiency water removal (> 98%) > Shut
SUMMARY STAINLESS STEEL FITTINGS FITTINGS P PUSH-IN FITTINGS, STAINLESS STEEL D3.2 P STANDARD FITTINGS SERIES XA D3.8 P QUICK FITTINGS SERIES XC D3.
SUMMARY STAINLESS STEEL D3 P PUSH-IN, STAINLESS STEEL D3.2 P STANDARD SERIES XA D3.8 P QUICK SERIES XC D3.11 SUMMARY STAINLESS STEEL D3.1 PUSH-IN, STAINLESS STEEL The push-in fittings in the XR can be
Miniature Regulator. Standard Specifications. Model IN side OUT side (Applicable tubing O.D.) Proof pressure Maximum operating pressure
Miniature Regulator Series 00F Compact and lightweight ( g) Low cracking pressure 0.0 MPa Standard model equipped with backflow function Standard Specifications Port size Fluid side side (Applicable tubing
Tubes and stiffener sleeves Use of stiffener sleeves
Tubes and stiffener sleeves Use of stiffener sleeves very thick wall thickness not recommended thicker wall thickness decreasing pressure resistance increasing wall thickness ideal wall thickness no stiffener
Brass ball valves 60 series
Brass ball valves 60 series /8 to 3 Rp /4 to Rp Ideally suited for most industrial applications Easy installation, simple operation and maintenance free Full bore passage giving minimum flow resistance
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT SERIES Features Standard Port 3-way L or T flow path Four seat design allows for full pressure at any port Hand lever operator Actuator
Pneumatics CONTENT
Pneumatics CONTENT 2 3 4 5 6 7 8 9 Fittings 453 Flexible Tube 47 Quick Release Couplings 477 Actuators 485 Solenoid & Pneumatic Valves 495 Mechanical & Manual Valves 507 Automatic Valves 57 Filters, Regulators
LIQUIDLINE PROGRAM. Connections for cooling water. dezincification-resistant brass. Messing. aluminium.
LIQUIDLINE PROGRAM Connections for cooling water dezincification-resistant brass Messing aluminium stainless steel 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents,
3/2 Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface
3/ Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface Suitable for instrumental air, neutral gaseous and liquid fluids and
Flow. group *2) G1/4 1, , B G1/ , B /4 NPT , B N/en
/ poppet valves electromagnetic actuated, directly controlled G /4, G / or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to,33 0 - mbar For a.c. solenoid systems with integrated
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
FITTINGS, CONTROLS AND ACCESSORIES
, CONTROLS AND ACCESSORIES Regardless of your application, Norgren has fittings and accessories to complete your pneumatic package. Norgren has an extensive lineup of Pneufit push-in fittings in metric
Our policy is one of continued research and development. We therefore reserve the right
For single and double operated actuators 3/2-, 5/2- and 5/3 Directional Control Valves Actuation: Electromagnetic Indirectly controlled soft seal spool valves Connection G /4, /4 NPT NAMUR Interface Exhaust
Hydraulic pressure switch 20D Acc. to ATEX
Acc. to ATEX 5 to 400 bar For Ex zones 1 and 2 (gases) as well as Ex zones 21 and (dusts) category II2G, type of protection EEx de IIC T6 Microswitch with gold plated contacts Electrical connection: connector
EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
Tube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications
Self-align Fittings Series H, D,, Flared ridge ferrule Prevents accidental loss of ferrule when inserting tubing into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening
PRODUCT DIRECTORY OUR GENIUS IS FITTINGS. Issue 1. Nickel Plated Brass BSP Fittings. Compression Fittings
Issue 1 PRODUCT DIRECTORY Compression Fittings Sistem-P Push-in Fittings Compact Push-in Fittings Nickel Plated Brass BSP Fittings Air Valves Silencers Tubing OUR GENIUS IS FITTINGS www.wadefittings.com
Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
Hi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
Miniature Fittings Series M
Miniature Fittings Series M pplicable Tubing: Ø 3.2, Ø 4, Ø 6 onnection Thread:, M, arb onfiguration for easy insertion into the tube Holds the tube tightly ody With electroless nickel plated Low tightening
Function Fittings, Flow Controls, and Accessory Valves
Section 3 Function Fittings, Flow ontrols, and Accessory Valves 12 VA Right Angle (anjo) Flow ontrol (inch-knob adj.)..fit-3-3 12 V Right Angle (anjo) Flow ontrol (inch-slot adj.)...fit-3-3 1 TA Right
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
Series 20 D. Pressure switches for all-fluid technique Port sizes G 1 /4 and G 1 /2
Series 0 D Pressure switches for all-fluid technique Port sizes and Microswitch with gold-plated contacts (silver plated for outdoor variants) Plug-in connection to DIN 4650 Technical Data Fluid: Neutral
BL84 - Excelon Plus Modular System Filter/regulator - Lubricator Combination Units
BL84 - Excelon Plus Modular System > Port Size 3/8" to 3/4" (PTF/ISO G) > Quickclamp connection system offers full modularity > Shut off valve & Filter/regulator with tamper resistant feature > Metal bowl
Drain. Technical data, standard model, shut off valve, filter/regulator with exhaust port and lubricator. Element
BL9 Excelon Pro Combination unit Filter/Regulator and Lubricator ø mm, G / Configuration flexibility Excellent value Low weight No tools required for assembly Technical features Medium: Compressed air
97100 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT
97 Inline /, 5/ & 5/ spool valves electromagnetic actuated, indirectly controlled G /, / NPT For single and double operated actuators Crossover-free switching, switch-over function guaranteed even with
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
Product warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
LF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
AUTO STAR with central connector M12x1
with central connector M2x Non corrosive spool and sleeve for long trouble free life 5/2 and Glandless Valves Actuated Sub-base Mounted ISO 5599- #, #2, #3 6 bar (4,5 W) and 0 bar (2 W) 24V DC solenoids
For single and double operated actuators. Exhaust air recirculation (3/2 way function)
For single and double operated actuators /-, 5/- and 5/ Directional Control Valves Actuation: Electromagnetic Indirectly controlled soft seal spool valves Connection G /4 or /4 NPT NAMUR interface Exhaust
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
Super X Inline 3/2 and 5/2 Spool valves, solenoid and pilot actuated
> > Port size: G/8 & G/4 > > Low and high power solenoid coil options > > End, side or face mounting solenoids > > Light weight corrosion resistant materials > > Option for manual override acting directly
TUBES, HOSES, AND FITTINGS
TUBES, HOSES, AND FITTINGS 1. DESCRIPTION This section contains instructions and specifications for aircraft system plumbing and fittings. Page 1 2. MAINTENANCE PRACTICES A. Ice Protection System Compression
Thermal hysteresis 0.5% max. of full scale (within compensated temperature range) 1% max. for ranges mbar mbar mbar
Pressure Transmitter Type FM40466 General application Pressure transmitters are used to measure the relative (gauge) and absolute pressures in liquids or gases. The measuring device for the transmitter
RT Series Roundline Plus Thrusters
9/16" to 3" bore Composite and Roller Bearings PS magnetic piston option Optional ecology seal Optional shock absorbers Choice of high load composite or precision low friction bearings Comes with stroke
VP23 3-way proportional pressure control valve Directly-controlled seat valve with µp-driven pressure control G 1/4... G 3/4
-way proportional pressure control valve Directly-controlled seat valve with µp-driven pressure control G /... G / All-digital control electronics Variable pressure control Optional: serial interface with
Series AV2000/3000/4000/5000
Soft Start-up Valve Series AV/3/4/5 Series introduced! A start-up valve that gradually increases supply pressure during start up and rapidly exhausts system air when the supply air is shut off AC AV AU
Swivel Joint Heads (Basic Unit)
Swivel Joint Heads (Basic Unit) Design Configuration Weld edge preparation according to DIN 2559 or ANSI B16.25 Grease nipple/ ball Lifetime greasing Grease nipple only on request Stator Rotor Internal
966SRL 966SBL Nominal size A B C D Weight Red Lever Blue Lever in mm mm mm mm kg Product Code Product Code
D rass Full ore FIG 966SRL and 966SL WRS Valves Lockable lever as standard 966SRL 966SL Nominal size D Weight Red lue in mm mm mm mm kg Product ode Product ode 4 4.4 44.7 90 8 0.7 784204 78408 8 45.4 47.8