Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:

Size: px
Start display at page:

Download "Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:"

Transcription

1 Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / / / / 9135 Min. Burst Pressure (bar / PSI) 1100 / / / / 7557 Testing Pressure (bar / PSI) 600 / / / / at 0 C / 3 F 88 / / / / at 30 C / 86 F 0 / / / / Pressure Rating in bar / PSI at 50 C / 1 F (bar / PSI) 00 / / / / 9137 at Indicated Temperature at 80 C / 176 F 3 / / / 73 5 / 7861 at 100 C / 1 F 308 / / / / 703 Working Temperature ( C / F) -35 C C / -31 F F (momentary +10 C / +8 F) Inside Diameter (mm / in) /.08 /.16 Outside Diameter (mm / in) 5 /.0 8,6 /.3 Bending Radius at working pressure 0 /.79 0 / 1.57 (mm / in) at -0 C / F 30 / /.36 Max. Coil ength (m / ft) 100 / 38 Weight / m (g / oz) 16 /.50 / 1.35 Inner / Outer Tube PA Reinforcement Synthetic Fibre Stard hose end material is Steel 11 S Mn Pb 30 (1.0718), zinc/ nickel-plated (Type 15: Steel, black zinc/nickel-plated) Stainless Steel: VA (1.305/AISI 303), VA (1.571/AISI 316Ti) on request Stard Hose STAUFF-Test 0/0 STAUFF-Test 15/15 STAUFF-Test 1/1* STAUFF-Test 10/10 auge Adaptor Ø5 (Ø.0) Ø5 (Ø.0) Ø5 (Ø.0) Ø5 (Ø.0) Ø5 (Ø.0) S1,65 x 1,5 M16 M16 x 1,5 * Special thread: buttress thread S1,65 x 1,5 1 / Max. Working Pressure: 00 bar / 5801 PSI Burst Pressure: 1100 bar / 1595 PSI Pressure/t factor: to 0 C 1 % at 30 C 110 % at 50 C 100 % at 80 C 86 % at 100 C 77 % Max. Working Pressure: 630 bar / 9137 PSI Burst Pressure: 1900 bar / 7557 PSI Pressure/t factor: to 0 C 1 % at 30 C 110 % at 50 C 100 % at 80 C 86 % at 100 C 77 % Max. Working Pressure: 00 bar / 5801 PSI Burst Pressure: 1100 bar / 1595 PSI Pressure/t factor: to 0 C 1 % at 30 C 110 % at 50 C 100 % at 80 C 86 % at 100 C 77 % Max. Working Pressure: 00 bar / 5801 PSI Burst Pressure: 1100 bar / 1595 PSI Pressure/t factor: to 0 C 1 % at 30 C 110 % at 50 C 100 % at 80 C 86 % at 100 C 77 % auge adaptor 1/ NPT, 1/ 1/ NPT on request auge adaptor available for all STAUFF-Test series B36 Dimensional drawings: All dimensions in mm (in).

2 Working Pressure up to 630 bar / 9135 PSI SMS / SS + Test Hoses Order Code STAUFF Test Hose SMS * 1 0 / M B C6F Hose End 1 (see pages B38 - B3) Hose End (see pages B38 - B3) ength / Material Hose End 0 A.... J.... only specify when ength in A = 00 bar / 580 PSI Stard hose end material is Steel 15 S.... D.... different hose ends mm B* = 630 bar / 9137 PSI 1 K.... B.... are required (see above) C* 3 = 30 bar / 931 PSI U.... Stard engths see table below. D* 3 = 630 bar / 9137 PSI M P.... N.... F.... etc. W.... C.... * 1 for gaseous media type SS - Test hoses are perforated * Stard test hose option for North America is version B. * 3 Type C D - are perforated 11 S Mn Pb 30 (1.0718), zinc/nickel-plated = C6F Type 15: Steel, black zinc/nickel-plated = C6F Stainless Steel: VA (1.305/AISI 303), VA (1.571/AISI 316Ti) on request STAUFF B Test Stard ength * in mm in in Bending protection on request. Order Code HE 0 B C6F Hose End (see pages B38 - B3) / Material Hose End 0 A.... J.... A = 00 bar / 580 PSI Stard hose end material is Steel 15 S.... D.... B = 630 bar / 9137 PSI 11 S Mn Pb 30 (1.0718), zinc/nickel-plated = C6F 1 K.... B.... C = 30 bar / 931 PSI Type 15: Steel, black zinc/nickel-plated = C6F U.... D = 630 bar / 9137 PSI Stainless Steel: M P.... VA (1.305/AISI 303), N.... F.... etc. VA (1.571/AISI 316Ti) on request W.... C.... B37

3 Test Ends / Order Codes Hose End Description Type STAUFF-Test Screw-type suitable for test points 0 M16 x 15 M16 x 1,5 1 S1,6 x 1,5 STAUFF-Test Screw-type 0 M16 x suitable for test points -0 O 15 M16 x 1,5 1 S1,6 x 1,5 SW STAUFF-Test Screw-type suitable for test points 0 M16 x (short wire version) OX 15 M16 x 1, S1,6 x 1,5 STAUFF-Test Plug in-type 10 Plug in system auge adaptor BSP-thread for 3/8, 1/, M1 x 1,5 M0 x 1,5 swivel nut like type N 1/ 1/ / 1/ M 3/8 3/ M1 x 1, M0 x 1, B38

4 / Order Codes Hose Ends Hose End Description Type gauge adaptor BSP-thread for 1/ swivel nut like type N W 1/ 1/ SW auge adaptor NPT-thread 1/ 1/ STAUFF B Test for 1/ NPT swivel nut like type M 1/ 1/ NPT N 1/ 1/ NPT gauge adaptor NPT-thread for 1/ NPT swivel nut like type N A 1/ 1/ NPT SW 1/ 1/ NPT Stpipe for compression ring fittings ISO 83-1 / DIN S Ød (see ) 0 (.79) Note: Stpipe version is not in accordance with the state of the art. Use at own risk. We recommend the use of the series K, R or. S S S S 1/ 1/ Stpipe for compression ring fittings ISO 83-1 / DIN S Ød (see ) Note: Stpipe version is not in accordance with the state of the art. Use at own risk. We recommend the use of the series K, R or. S S Dimensional drawings: All dimensions in mm (in). B39

5 Test Ends / Order Codes Hose End Description Type Seal with O-ring for cone fitting ISO 83-1 / DIN 353 c/w swivel nut 6 M1 x 1, M1 x 1, M16 x 1, K 1 M18 x 1, S M1 x 1, S M16 x 1, S M18 x 1, S M0 x 1,5.9 Seal with O-ring for cone fitting ISO 83-1 / DIN 353 c/w swivel nut 5 elbow R 6 M1 x 1, S M1 x 1, SW Seal with O-ring for cone fitting ISO 83-1 / DIN 353 c/w swivel nut 6 M1 x 1, M1 x 1, M16 x 1, S M1 x 1, S M16 x 1, S M18 x 1,5.9 Male thread DIN 385-B 1 M1 x 1, /8 1/ / 1/ / 1/ Male thread NPT ANSI-stard 1/8 1/8 NPT F 1/ 1/ NPT B0

6 / Order Codes Hose Ends Hose End Description Type Male thread for cone fitting ISO 83-1 / DIN M1 x 1, C 8 M1 x 1, S M1 x 1, Male thread SAE J 51 8 S M16 x 1, / 7/16 0 UNF 1.55 STAUFF B Test J 5/16 1/ 0 UNF /8 9/16 18 UNF Universal sealing head with swivel nut for cone fitting ISO 83-1 / DIN M1 x 1, M1 x 1, M16 x 1, D 1 M18 x 1, S M1 x 1, S M16 x 1, S M18 x 1, S M0 x 1,5.9 Universal sealing head with swivel nut for cone fitting ISO 83-1 / DIN 353 Q 10 M16 x 1, S M18 x 1,5.87 swivel nut for cone fitting DIN EN 560 1/8 1/8 1.7 B 1/ 1/ B1

7 Test Ends / Order Codes Hose End Description Type swivel nut SAE J cone 1/ 7/16 0 UNF U 5/16 1/ 0 UNF /8 9/16 18 UNF swivel nut SAE J cone 5 UR 1/ 7/16 0 UNF 1.55 swivel nut SAE J cone E 1/ 7/16 0 UNF swivel nut SAE J cone ER 1/ 7/16 0 UNF Test hose for air brake systems P M16 x 1, B

8 / Order Codes Hose Ends Hose End Description Type swivel nut 60 cone H 1/ 1/ Screw-type ORFS SAE J 153 9/16 9/16 18 UNF STAUFF B Test T 11/16 11/16 16 UN 1.83 Screw-type ORFS SAE J 153 V 11/16 11/16 16 UN 1.83 Hose end with integrated check valve 0 M16 x RV 15 M16 x 1,5 B3

9 Special Adaptors / Order Codes Hose Connector SSV l l1 Sealings Internal sealings made of FPM (Viton ). Metal Parts Stard material: Steel, zinc/nickel-plated = C6F (CrVI-free) Stard material SSV15: Steel, black zinc/nickel-plated = C6F (CrVI-free) For ordering VA (1.305 / AISI 303) replace "C6F" with "VA". For ordering VA (1.571 / AISI 316Ti) replace "C6F" with "VA". Thread Order Codes l1 l M16 x,5 18, SSV0-C6F M16 x 1,5,5 18, SSV15-C6F S1,65 x 1,5 31 1, SSV1-C6F Sampling Hose Adaptor SHA 1 l1 ØD Ød l3 3 STA Ød1 ØD1 l Metal Parts Stard material: Steel, zinc/nickel-plated = C6F (CrVI-free) Ød1 Ød l1 l l3 5, Order Code SHA0-5.5MM-C6F B

10 STAUFF Test eneral Technical Information Port Connections Sealing Details Type A d1 30 Type A - Threaded port factory stard Sealing: O-ring Type A Thread M8 x 1 M10 x 1 d1 +0,1 t1 min. t min 9, , ,5 1 16, t t1 0,5,5 Type B C Type B 0,1A A d1 Type C a t1 t Type B C - Threaded port type X acc. to DIN 385 Part 1 ; ISO (metric); ISO (inch) Sealing: Metal joint Type B / Elastomeric sealing Type C Thread d1 min. t1 min. t min. a max. M10 x M1 x 1, , M1 x 1, , M16 x 1, , M18 x 1, M0 x 1, M x 1, , /8 15 8,5 10, / 0 1,5 15,5 1, /8 3 1,5 15, / 8 1,5 18,5, Type D Type D - Parallel threaded port type Z DIN 385 Part (inch) Sealing: Taper Type D suitable sealant required Thread 90 t1 t t1 min. t min. Rp1/8 5,5 9,5..37 Rp1/ 8,5 13, Rp3/8 8,5 13, Rp1/ 10,5 16, B6 Dimensional drawings: All dimensions in mm (in).

11 eneral Technical Information STAUFF Test Port Connections Sealing Details Type D Type D - Taper threaded port ANSI/ASME B (NPT) Sealing: Taper Type D suitable sealant required Thread 90 t1 min. t min. 1/8 7 NPT 6,9 11, / 18 NPT 10 16, / 1 NPT 13,6, t t1 Type E Type E - Threaded port ISO (metric); ISO (UNF) Sealing: O-ring Type E Thread STAUFF B Test A 0, A 0,1 A d d1 z b a t1 t d1 +0,1 d min. t1 min. t min. a +0, b max. z ±1 M10 x 1 11, ,5 1, M1 x 1,5 13, ,5 1, 1, M1 x 1,5 15,8 1 11,5 1, 1, M16 x 1,5 17, ,5, 1, M x 1,5 3,8 9 15,5 18, M7 x 9, , /16 UNF 9, ,9 1, /16 UNF 1, 1 11,5 1, 1, / 0 UNF ,5 1, 1, /16 18 UNF 15,65 5 1,7 15,5,5 1, /8 1 UNF 3, ,7 0,5, Dimensional drawings: All dimensions in mm (in). B7

Test Coupling with Ball Check

Test Coupling with Ball Check Test 15 Connection Tread Introduction SMK15 Test Coupling wit Ball Ceck Test Coupling SMK15 Internal Ball Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast coupling for Monitoring

More information

STAUFF. Test. Local solutions for individual customers worldwide

STAUFF. Test. Local solutions for individual customers worldwide STAUFF Test ocal solutions for individual customers worldwide Walter Stauffenberg mbh & Co. K P.O.Box 745 58777 Werdol ermany Im Erenfeld 4 5879 Werdol ermany Telepone: + 49 2392 96-0 Facsimile: + 49 2392

More information

05. YY XX. XX. series nominal size

05. YY XX. XX. series nominal size Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced

More information

DN crimping diameter (guide values) [mm] 2 7,0 4 9,9

DN crimping diameter (guide values) [mm] 2 7,0 4 9,9 ØD hose hose PN pricked* ød part no. 2 400 bar yes 5 9-946-02-00-012 2 630 bar - 5 9-946-02-00-020 2 630 bar yes 5 9-946-02-01-020 4 550 bar yes 8 9-946-04-00-010 *for inert gases technical data of the

More information

Low-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements

Low-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements Low-Pressure Transportation and Hydraulic and Fittings the right solution for special applications and requirements A wide range of different hose types rubber is available, with textile-braide fire-retardant

More information

Microbore Hose, Assemblies & accessories

Microbore Hose, Assemblies & accessories bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse

More information

Rapid push-in fittings for plastic tubes Series 1000

Rapid push-in fittings for plastic tubes Series 1000 CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,

More information

Catalogue 7 STAUFF Test

Catalogue 7 STAUFF Test est Couplings est daptors est Hoses and Connectors Catalogue 7 SUFF est Introduction Introduction 4-11 est Couplings 12-53 est daptors 54-59 B est Hoses and Connectors 60-71 C echnical ppendix 72-77 D

More information

HIGH PRESSURE HYDRAULICS (Hose, Coupling, Pressure Gauges, Adaptors)

HIGH PRESSURE HYDRAULICS (Hose, Coupling, Pressure Gauges, Adaptors) HIGH PRESSURE HYDRAULICS (Hose, Coupling, Pressure Gauges, Adaptors) HIGH PRESSURE THERMOPLASTIC HOSES As the specialist in the manufacturing of high pressure hoses, we are poised to achieve exceptional

More information

37 flare couplings to ISO

37 flare couplings to ISO Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and

More information

Quality and Service worldwide. Test 20 Typ SMK (M 16 x 2)

Quality and Service worldwide. Test 20 Typ SMK (M 16 x 2) Quality and Service worldwide Test 20 Typ SMK (M 6 x 2) Distributor Walter Stauffenberg mbh & Co. K P.O.Box 745 D-58777 Werdol Im Erenfeld 4 D-5879 Werdol Tel. : + 49 (0) 2392 96-0 Fax: + 49 (0) 2392 2505

More information

Catalogue 6 STAUFF Valves

Catalogue 6 STAUFF Valves Two-Way Ball Valves Multi-Way Ball Valves Flow Control and Check Valves Gauge Isolator Valves Catalogue 6 STAUFF Valves Germany Walter Stauffenberg GmbH & Co. KG Im Ehrenfeld 4 58791 Werdohl Tel.: +49

More information

3/2 Way Ball Valves KHB3K

3/2 Way Ball Valves KHB3K / Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN

More information

Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.

Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body. Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2

More information

Thread and Connector Identification

Thread and Connector Identification How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese

More information

Hose, Tubes & Ducting. Hose, Tubes & Ducting

Hose, Tubes & Ducting. Hose, Tubes & Ducting Hose, Tubes & Ducting 382 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with

More information

Hose, Tubes & Ducting. Hose, Tubes & Ducting

Hose, Tubes & Ducting. Hose, Tubes & Ducting Hose, Tubes & Ducting 392 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with

More information

Hyva Hoses & Adapters Introduction

Hyva Hoses & Adapters Introduction Introduction Hyva Hoses Hoses offered by HYVA comply with the highest safety standards for truck hydraulics. Working pressures range from 225 to 350 bar. Code system hydraulic hoses Hose 1 H.P. 16-2000

More information

Ball Valves Gemels GE2 2-WAY HIGH PRESSURE BALL VALVES. Type and way of valve GE2 2-way high pressure ball valves

Ball Valves Gemels GE2 2-WAY HIGH PRESSURE BALL VALVES. Type and way of valve GE2 2-way high pressure ball valves Stainless Steel Ball Valves Gemels 34.1.1 GE2 2-WAY HIGH PRESSURE BALL VALVES GE2 stainless steel GE2 G 1/2 DN13 4 4 4 4 A B Type and way of valve GE2 2-way high pressure ball valves Valves dimension of

More information

Angle Seat Valve /2" up to 3"

Angle Seat Valve /2 up to 3 1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure

More information

BASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function.

BASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function. BASICLINE PROGRAM Standard components for pneumatics pilot operated check valve Messing throttle with click function rotary connector 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY

More information

Engineering Data. Assembly Length. How to Determine Correct Assembly Length

Engineering Data. Assembly Length. How to Determine Correct Assembly Length Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown

More information

Description. Rhino EFD Bulk Unloader Packages

Description. Rhino EFD Bulk Unloader Packages Rhino EFD Bulk Unloader Packages Description See Figure. The Rhino EFD Pail and -Gallon Drum Bulk Unloader Packages consist of the following major components: Pump () Controls () Frame () Follower Plate

More information

EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI

EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively

More information

Low Pressure Series KL

Low Pressure Series KL Low Pressure 35 Nom. Type Material Max. static working C v value Cross Page bore pressure at 20 C both sides one side both sides one side section [bar] [psi] self sealing self sealing [mm 2 ] 6 KL-006

More information

for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint

for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint > Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,

More information

SCREW HOSE COUPLINGS SCREW HOSE COUPLINGS B.1. STANDARD. LMC s screw hose couplings with a smooth hose shank comply with EN / DIN 2817.

SCREW HOSE COUPLINGS SCREW HOSE COUPLINGS B.1. STANDARD. LMC s screw hose couplings with a smooth hose shank comply with EN / DIN 2817. SCREW HOSE COUPLINGS B.1. STANDARD LMC s screw hose couplings with a smooth hose shank comply with EN 14420-5 / DIN 2817. OPERATION Screw hose couplings are used to connect hoses with male or female BSP,

More information

Camlocks. Snaplock Camlock Couplings. The original Snaplock quick release coupling. Applications

Camlocks. Snaplock Camlock Couplings. The original Snaplock quick release coupling. Applications Snaplock Camlock Couplings The original Snaplock quick release coupling The tried & trusted cam coupling with the high reputation of the Snaplock brand name offering additional features to our standard

More information

Carbon or stainless Steel

Carbon or stainless Steel For Technical Assistance and Sales Contact: FlexEJ Ltd Tel: +44 (0) 1384 881188 Email: sales@flexej.co.uk Fax: +44 (0) 1384 896875 Web: www.flexej.co.uk Section 6 FLEXIBLE HOSES TYPE FSH SERIES METALLIC

More information

Components: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body. ød2. Pipe / Tube / Hose Bore (1 Clamp Body)

Components: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body.   ød2. Pipe / Tube / Hose Bore (1 Clamp Body) ød Components: Dimensions / Order Codes Clamp Body ød B H L L L Clamp Body Colour: Green Material code: PP Colour: Black Material code: PA See page A88 for material properties and technical information.

More information

Catalogue 7 STAUFF Test

Catalogue 7 STAUFF Test est Couplings est daptors est Hoses and Connectors Catalogue 7 SUFF est Germany Walter Stauffenberg GmbH & Co. KG Im Ehrenfeld 4 58791 Werdohl el.: +49 2392 91 60 Fax: +49 2392 91 61 60 E-Mail: sales@stauff.com

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally

More information

ACCESSORIES AND DIAPHRAGM SEAL

ACCESSORIES AND DIAPHRAGM SEAL ACCESSORIES AND DIAPHRAGM SEAL TA102 TA201 TA202 TA203 TD101 TD103 TD104 TD202 Data sheet H20022a 05/2017 TD301 TD302 TD303 Trafag Italia Srl Via Cremona 1 20025 Legnano (Mi) Tel. +39 0331 59 23 97 Fax

More information

Table of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144

Table of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144 Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold

More information

VERTICAL MULTISTAGE PUMPS SSV-F Hz

VERTICAL MULTISTAGE PUMPS SSV-F Hz VERTICAL MULTISTAGE PUMPS SSV-F 1-3 - 6-1 - 15 5Hz TABLE OF HYDRAULIC PERFORMANCES AT 5Hz PUMP TYPE RATED POWER H1 Q = DELIVERY l/min 8,3 16,7, 33,3 2 5, 58,3 67 75, m³/h,5 1 1,5 2 2,5 3 3,5,5 kw HP Bar

More information

STAUFF Test. Test Couplings. Test Adaptors. Test Hoses and Connectors. Product Overview

STAUFF Test. Test Couplings. Test Adaptors. Test Hoses and Connectors. Product Overview Test Adaptors Test Hoses and Connectors Product Overview STAUFF Test Test couplings from the STAUFF Test product range are already planned in suitable positions in the hydraulic system during the design

More information

Lubrication Systems. Section 26

Lubrication Systems. Section 26 Lubrication Systems Section 26 26-1 INFORMATION - SYSTEMS The Lincoln QuickLub is an automated and centralised lubrication system that can improve productivity and extend the service life of your plant.

More information

Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm

Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm SZ Compact Cylinder Specifications Features Type Series Compact Cylinder SZ Configurations SZ6 Double Acting, Single Rod, SZD6 Double Acting, Double Rod, SZV6 Double Acting, Non-Rotating, SZ7 Single Acting,

More information

GS-FLANGE SYSTEM. SAE psi

GS-FLANGE SYSTEM. SAE psi SAE 10000 psi Flange dimensions...160 Retain ring flanges...161 Grooving direct on to pipe...162 Flange for welding...163 Tee block, Elbow block...164 Blind flange...165 Seal carriers...166 Retain ring...167

More information

SECTION 15 Breakaway Couplers

SECTION 15 Breakaway Couplers SECTION Breakaway Couplers Make Model Page Intertraco Intertraco Intertraco Intertraco Intertraco Intertraco Series A & B Breakaway Couplers Series J, N & P Breakaway Couplers Series E & S Breakaway Couplers

More information

IGATEC - Standard - Swivel Joints

IGATEC - Standard - Swivel Joints IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International

More information

FIT-2. Inch. Ø Â" to Ë" O/D tube

FIT-2. Inch. Ø Â to Ë O/D tube For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and

More information

funnels, measures, gravity cocks, jerry cans and oil suction pumps...

funnels, measures, gravity cocks, jerry cans and oil suction pumps... funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................

More information

Fittings Metal Push-To- Connect Fittings. We make things MOVE

Fittings Metal Push-To- Connect Fittings. We make things MOVE Fittings Metal Push-To- Connect Fittings We make things MOVE Contents 3 Fittings 4 Product Features 4 Push-In Fittings 4 Features and Benefits 5 How it Works 5 Materials of Construction 5 Fluid 5 Operating

More information

Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Industrial Application

Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Industrial Application Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Straight, Male 45, Male 90, Male Straight, Female Straight, Cable Hose, Male Straight Swivel Fittings Ferrules for Fittings Further Accessories Applications

More information

HOSE, TUBE & CONNECTION FITTINGS CATALOGUE. JSG Industrial Systems quality industry solutions. Fire Suppression Systems. Flow Measurement Systems

HOSE, TUBE & CONNECTION FITTINGS CATALOGUE. JSG Industrial Systems quality industry solutions. Fire Suppression Systems. Flow Measurement Systems HOSE, TUBE & CONNECTION FITTINGS CATALOGUE JSG Industrial quality industry solutions Lubrication Management Material Dispensing Management Hose & Cable Management Diesel & Fluid Management Fire Suppression

More information

HIGH PRESSURE BALL VALVES

HIGH PRESSURE BALL VALVES HIGH PRESSURE BALL VALVES HIGH PRESSURE BALL VALVES TABLE OF CONTENTS Page Description 3 Valve Design 3 Product Features 3 Available Options 3 2-Way with NPT and SAE Connections 4 2-Way with SAE Split

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.

More information

Messing. screw-in connectors

Messing. screw-in connectors Messing screw-in connectors 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively underline

More information

Fittings and Accessories. For oil and grease. For Centralized Lubrication Systems and General Use

Fittings and Accessories. For oil and grease. For Centralized Lubrication Systems and General Use Fittings and Accessories For oil and grease. For Centralized ubrication Systems and General Use Fittings and Accessories This brochure provides an overview of metallic pipe unions for luid engineering.

More information

Hygienic Butterfly Valve VZFA Product range overview

Hygienic Butterfly Valve VZFA Product range overview Hygienic Butterfly Valve Product range overview Hygienic butterfly valve Typ Norm Nominal diameter -C Clamp OD 1" 1 1/2" 2" 2 1/2" 3" 4" Connection possibilities Clamp / Clamp Welding / Welding Clamp /

More information

IECEx Certificate of Conformity

IECEx Certificate of Conformity Annex Page 1 of 8 Equipment: The E** series Type ranges of cable glands consist of a male-threaded front entry component containing an elastomeric sealing ring and a Nylon 6 skid washer which effect flameproof

More information

10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction

10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction 1F-xxx Series Valve Quick Spec Product Scope Size Range 1/4" 2", (Sch 16 Pipe Bore) 2"Reduced; 3" Double Reduced Body Type 3-pc, non Swing-out design, Optional Ends Pressure Rating up to 6 psi WOG & up

More information

Hose, Hose couplings & Adaptors B-HO-10E

Hose, Hose couplings & Adaptors B-HO-10E , couplings & Adaptors B-O-0E Features of Nitta thermoplastic hoses Clean and Eco-friendly Smooth inner surface of the plastic hoses keeps the operating oil clean. Piping on Site With the one-touch coupling

More information

Quick Release Couplings & Live Swivel Joints

Quick Release Couplings & Live Swivel Joints hardy spicer HOSE FITTINGS DRIVESHAFTS Quick Release Couplings & Live Swivel Joints, 17-1 Discovery Road, Dandenong South, Victoria, 175 Toll free Ph: 100 04 67 DISCLAIMER Disclaimer The information and

More information

ISO, SAE, DIN, JIS, BS, NF

ISO, SAE, DIN, JIS, BS, NF Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications

More information

Product warranty. Quality Policy. The Goal

Product warranty. Quality Policy. The Goal About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international

More information

Swivel joints Swivel joints systems Rotary connections

Swivel joints Swivel joints systems Rotary connections Swivel joints Swivel joints systems Rotary connections Contents 1. Introducción 2 2. Swivel joint type IFG 3 3. Swivel joint type IFGL 4 4. Swivel joint type IFGM 5 5. Swivel joint type IFGF / IFGFL 6

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing

More information

Flat Face. Flat Face. Series: A Premier Interchange: ISO ISO Interchange Couplings

Flat Face. Flat Face. Series: A Premier Interchange: ISO ISO Interchange Couplings ISO 16028 Interchange Couplings Flat Face Overview A or Premier series offers higher pressure ratings, superior flow ratings, lower pressure drop compared to FIRG series or competitors products. Flat Face

More information

Fittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)

Fittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1) > Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,

More information

GE2 G 1/2 DN A B

GE2 G 1/2 DN A B GE2 +GE2 CARBON STEEL Type: ball valve GE 2 way Body: block Material: 1,0737 Ball seats: from DN4 up to DN25 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 500 Bar depending on valve size and seal s

More information

Series 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve

Series 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications

More information

RoFLEX - HIGH PRESSURE - SCREW COUPLINGS

RoFLEX - HIGH PRESSURE - SCREW COUPLINGS Edition E 01/2013 DAT Copyright 2014 by Swiss Technology RoFLEX - HIGH PRESSURE - SCREW COUPLINGS - connectable and disconnectable under full pressure - Part "A" (Aussengewinde) Part "S" (Sechskantmutter)

More information

800 m. Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request 8.

800 m. Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request 8. Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request S 800 m max. operating pressure for 1.4301 for 1.4571 x s PB -No

More information

GEMÜ 205 Electrically operated solenoid valve

GEMÜ 205 Electrically operated solenoid valve Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator

More information

Solenoid Valve, Plastic

Solenoid Valve, Plastic Solenoid Valve, Plastic Construction The EMÜ directly controlled 2/2-way plastic solenoid valve has a high performance coil which is hermetically separated from the medium by means of a flexible PTFE bush.

More information

Special valves. Logic components AND/OR Timer 2/2 way screw-in valves Miniature screw-in pressure regulators Relief valves

Special valves. Logic components AND/OR Timer 2/2 way screw-in valves Miniature screw-in pressure regulators Relief valves Contents Description Page Dual-pressure valve (AND) 3 OR valve (OR) 33 Timer 34, 35 / way screw-in valves 36, 37 Miniature screw-in pressure regulators 38, 39 Relief valves 40 Special valves Logic components

More information

Pressure Gauge Kit and Test Couplings

Pressure Gauge Kit and Test Couplings Pressure Gauge Kit and Test Couplings Overview The Eaton pressure gauge kit and screw together test couplings provide accurate and efficient pressure control and monitoring of your hydraulic system, while

More information

QUICK SELECTION GUIDE

QUICK SELECTION GUIDE SELECTION GUIDE SAE HYDRAULIC 4-BOLT AND SPLIT FLANGED FITTINGS IN CARBON STEEL AND STAINLESS STEEL ISO 14001 Registered Environmental Management ISO 9001 Registered Quality Management OHSAS 18001 Registered

More information

GROUPCODE NEN : ANSI : STEEL BS : STEEL

GROUPCODE NEN : ANSI : STEEL BS : STEEL RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6

More information

Instrumentation Products F Series Manifolds and Multi-Way Cocks

Instrumentation Products F Series Manifolds and Multi-Way Cocks Instrumentation Products F Series Manifolds and Multi-Way Cocks Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation

More information

Couplings, hose clamps and pneumatics

Couplings, hose clamps and pneumatics Cejn 310... 79 Cejn 320... 79 Cein 331... 80 Cejn 421... 80 Cejn 223... 81 Cejn 341... 81 Cejn 410... 82 Cejn 550... 82 Cejn 342... 83 Cejn 347... 83 Cejn 220... 84 Cejn 171 (Acetylen)... 84 Cejn 172 (LPG)...

More information

4 PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS

4 PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS PUSH-IN FITTINGS / BRASS PUSH-IN FITTINGS PLUS High performance fittings, easy to be used. Strong but also compact in order to ensure the maximum assembling flexibility. Silicon free materials. In compliance

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features

More information

Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L

Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection

More information

Data sheet. D-2011/05/ Date: 02/2013. Type TK16 CNG. CNG Fuelling Nozzle. for cars at self-service fuelling stations

Data sheet. D-2011/05/ Date: 02/2013. Type TK16 CNG. CNG Fuelling Nozzle. for cars at self-service fuelling stations Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TK16 CNG CNG Fuelling Nozzle for cars at self-service fuelling stations FUTURE. TECHNOLOGY. TODAY. General Description 1 Impact protection 2 Actuation

More information

MARCH Polyethylene Piping Systems.

MARCH Polyethylene Piping Systems. MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional

More information

Standard screw fittings Brass Art. No to

Standard screw fittings Brass Art. No to 251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14

More information

Find Hydraulic and Pneumatic Diagnostic Fittings at Secondary Seal:

Find Hydraulic and Pneumatic Diagnostic Fittings at  Secondary Seal: Test Points Description Features Applications Specifications Schroeder Check test points provide a fast, easy, and safe way to test pressures up to 10,000 psi (680 bar) in hydraulic or pneumatic systems

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact

More information

Components: Dimensions / Order Codes

Components: Dimensions / Order Codes Light Series LB Components: Dimensions / Order Codes Clamp Body Single Design ø D 2 B ø D 3 H S ø D 1 L2 L3 Order Codes Clamp Body Standard Materials Polypropylene Colour: Black Material code: PP Polyamide

More information

H 58 H 59. Custom Made. Custom Made

H 58 H 59. Custom Made. Custom Made 58 Custom ade Custom ade 59 ff Custom ade 60 Custom ade 61 ff ff ff ff ff Custom ade 62 Custom ade 63 m ff ff ff ff 64 Custom ade Custom ade 65 FF Port diameter 1/8 1/4 3/8 1/2 3/4 1 DE 17.2 21.5 25.5

More information

Speed Controller with One-touch Fitting AS13 1F-M3 AS13 1F-M5. Specifications

Speed Controller with One-touch Fitting AS13 1F-M3 AS13 1F-M5. Specifications Speed Controller with One-touch Fitting Series Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube

More information

INDUSTRIAL VALVES BRASS BALL VALVES PLUS WIDE SOLUTIONS ACCORDINGLY TO EVERY KIND OF APPLICATION OPTIMIZED DIMENSIONS & PERFORMANCES THREAD UP TO 4

INDUSTRIAL VALVES BRASS BALL VALVES PLUS WIDE SOLUTIONS ACCORDINGLY TO EVERY KIND OF APPLICATION OPTIMIZED DIMENSIONS & PERFORMANCES THREAD UP TO 4 591 INDUSTRIAL VALVES BRASS BALL VALVES PLUS WIDE SOLUTIONS ACCORDINGLY TO EVERY KIND OF APPLICATION OPTIMIZED DIMENSIONS & PERFORMANCES THREAD UP TO 4 INDUSTRIAL VALVES / BRASS BALL VALVES 592 BRASS EUROPE

More information

1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler

1(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler 1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler Material Maximum working pressure Test pressure Minimum Burs Pressure uminium 16 bar / 232 psi 24 bar / 348 psi 80 bar / 1160

More information

3- and 4-Way Ball Valves KH3/KH4

3- and 4-Way Ball Valves KH3/KH4 3- and 4-Way Ball Valves KH3/KH4 up to 500 bar up to DN 20 KH3 KH4 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, HYDAC 3/2 and 4/2 way ball valves are units which shut off and divert the flow of an

More information

R677. Diaphragm Valve, Plastic

R677. Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically

More information

Stauff Hydraulic Accessories

Stauff Hydraulic Accessories Hydraulic & Offshore Supplies Stauff Hydraulic Accessories YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE Contents STAUFF Hydraulic Accessories

More information

Series 900 Minifolds. Aluminium Air Distribution Manifolds. Manifolds & Minifolds. Technical Specifications. hnl-uk.com. Series 900 Minifolds

Series 900 Minifolds. Aluminium Air Distribution Manifolds. Manifolds & Minifolds. Technical Specifications. hnl-uk.com. Series 900 Minifolds Series 900 Minifolds Aluminium Air Distribution Manifolds Replace complex assemblies of valves and fittings with anodised aluminium MINIFOLDS., OR 20 OUTLETS COMPREHENSIVE RANGE ALSO AVAILABLE IN 36 STAINLESS

More information

Configurations: s.64. s.31. s.74 3 way. Flow: Mini 2 way Direct mount. Flow: Full. Flow: Standard 3 way. ISO 5211 F03 Flange

Configurations: s.64. s.31. s.74 3 way. Flow: Mini 2 way Direct mount. Flow: Full. Flow: Standard 3 way. ISO 5211 F03 Flange RUBINETTERIE UTENSILERIE BONOMI MEETING STANDARDS IS OUR STANDARD Configurations: 1 2 3 s.31 s.64 s.74 3 way Flow: Mini 2 way Direct mount Flow: Full 2 way ISO 5211 F03 Flange Flow: Standard 3 way ISO

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic

More information

A PREMIER SERIES FLAT FACE COUPLERS ISO Interchange

A PREMIER SERIES FLAT FACE COUPLERS ISO Interchange A PREMIER SERIES FLAT FACE COUPLERS ISO 16028 Interchange The A Premier Series Flat Face ISO 16028 Interchange Couplings offer higher pressure ratings, superior flow characteristics, and lower pressure

More information

BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic

BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G

More information

Clearwater Tech - Phone: Fax: Web: -

Clearwater Tech - Phone: Fax: Web:  - Accessories Bus cables PROFIBUS-PA cables Straight version PROFIBUS-PA Ex i cables Straight version TM-I marker sleeve TM-I marker sleeve Designation Type Order No. Industrial zone PROFIBUS-PA cable One

More information

Breathers. BF...3 & BF...4 Series INNOVATIVE FLUID POWER. ø D1 HEX. Specifications. Hydraulic Symbols. Model Code. Dimensions BF P 3 G 10 W 1.0 /.

Breathers. BF...3 & BF...4 Series INNOVATIVE FLUID POWER. ø D1 HEX. Specifications. Hydraulic Symbols. Model Code. Dimensions BF P 3 G 10 W 1.0 /. BF...3 & BF...4 Series Maximum flow rate - 31 scfm / 230 gpm at 0.04 bar Epoxy coated steel cap Zinc-plated internals Threaded connection Pressurized breather with relief valve (optional - BF3 only) Phenolic

More information

BALL VALVE SERIES Pneumatic actuator - El-O-Matic

BALL VALVE SERIES Pneumatic actuator - El-O-Matic C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G

More information

Cutting Ring Couplings

Cutting Ring Couplings Cutting Ring Couplings The soft seal connection with 4-fold benefits 3 Experience plus ideas Oil Solutions PO Box 653 Castlemaine 3450 Phone 0421 336 009 Fax 03 9012 3332 sales@oilsolutions.com.au www.oilsolutions.com.au

More information

Fittings and Accessories. for Centralized Lubrication Systems and General Use

Fittings and Accessories. for Centralized Lubrication Systems and General Use and Accessories 1-0103-US 1 Fittings and Accessories 1-0103-US for Centralized Lubrication Systems and General Use Fittings and Accessories 1-0103-US 3 Contents Page Adaptors... 9, 10 Banjo fittings...

More information

Ermeto Original Rotary fittings

Ermeto Original Rotary fittings Ermeto Original Rotary fittings Visual index EO rotary fittings DG 0 DG 02-R DG 02-M p. P6 p. P7 p. P8 EO 2 cone end / Male BSPP thread Male metric thread EO 2 cone end ED-seal (ISO 79) / EO 2 cone end

More information