M/44000/M. LINTRA Rodless cylinders Magnetic piston Double acting Ø 25 to 40 mm

Size: px
Start display at page:

Download "M/44000/M. LINTRA Rodless cylinders Magnetic piston Double acting Ø 25 to 40 mm"

Transcription

1 LINTRA Rodless cylinders Magnetic piston Double acting Ø 5 to 40 mm New compact, space-saving design Proven sealing system Integral switch mounting Adjustable cushioning Magentic piston as standard Technical data Medium: Compressed air, filtered, lubricated or non-lubricated Operation: Double acting, magnetic piston Operating pressure: to 8 bar Operating temperature: -30 C to 80 C max. (Consult our Technical Service for use below C) Cylinder diameters: 5, 3, 40 mm Strokes: 5000 mm or 96 inches max. Longer strokes on request Materials Barrel: Anodised aluminium alloy End covers: Aluminium alloy Yoke: Anodised aluminium alloy Cover and Pistons: Plastic Sealing strip: Polyurethane Cover strip: Polyamide Seals: Nitrile rubber & polyurethane Ordering examples See page Mountings and switches See page N/UK

2 Options selector /440 /M/ Porting ISO G-thread NPT-thread Substitute M C Stroke length in mm for ISO G-thread 5000 max. Guiding system Substitute Internal 0 Cylinder diameters (mm) Substitute Note: When specifying NPT ports the stroke should be given in inches Stroke length in full inches for NPT-thread 96 max. Fractional increments of stroke (inches) Substitute Substitute Substitute 0 A 3/8 G 3/4 P /6 B 7/6 H 3/6 R /8 C / J 7/8 S 3/6 D 9/6 K 5/6 T /4 E 5/8 M Special X 5/6 F /6 N Switches Cable Plug (M8x) Model Voltage Current Temperature LED Features Cable-/ Cable Straight cable Data sheet Reed Solid state V a.c. V d.c. max. C Plug length type Connection 90 M/50/LSU/*V ma , 5, 0 m PVC x 0,5 N/D M/50/LSU/5U ma m PUR x 0,5 N/D TM/50/RAU/S ma m Silicon x 0,5 N/D M/50/RAC/5V ma Changeover 5 m PVC 3 x 0,5 N/D M/50/LSU/CP ma Plug M8x 5 m PVC 3 x 0,5 M/P7300/5 N/D M/50/EAP/*V ma PNP, 5, 0 m PVC 3 x 0,5 N/D M/50/EAP/CP ma PNP, plug M8x 5 m PVC 3 x 0,5 M/P7300/5 N/D M/50/EAN/*V ma NPN, 5, 0 m PVC 3 x 0,5 N/D M/50/EAN/CP ma NPN, plug M8x 5 m PVC 3 x 0,5 M/P7300/5 N/D * Please insert cable length For details (technical informations, Cable materials, dimensions a.s.o.) see data sheets N/UK and N/UK Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under Technical Data. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. N/UK

3 Mountings Type C Type V Type S Switch mounting brackets Ø Page 5 Page 5 Page 5 5 QM/4405/ Q4405AAAAAM33 Q4405AAAAAM337 M/P QM/4403/ Q4403AAAAAM33 Q4403AAAAAM337 M/P QM/44040/ Q44040AAAAAM33 Q44040AAAAAM337 M/P7487 Mountings and accessories materials Item Type S C 3 V Description Yoke: zinc plated steel Mounting support: anodised aluminium Screws: zinc plated steel Bolts: stainless steel Anodised aluminium Screws: zinc plated steel Zinc plated steel Screws: zinc plated steel Item Type 7 Bracket 0 Fitting Description Plastic Body: PBT, O-Ringe, NBR Grab ring: stainless steel Release button: POM Data sheet: N/UK Ordering examples Cylinder LINTRA Pneumatic cylinder Ø 5 mm with adjustable cushioning, Magnetic piston and a 800 mm stroke, quote: M/4405/M/800 Mountings To order a centre support mounting V for Ø 5 mm cylinder quote: Q4405AAAAAM337 Switches To order a reed switch with LED and m cable length quote: M/50/LSU/V Switch mounting bracket To order a bracket for magnetically operated switches M/50; 5 mm bore cylinder quote: M/P7487 N/UK

4 My Mx Fy Fz Loading values for LINTRA Cylinders The values given in the table below show the forces in the directions Fy and Fz and the maximum moments Mx, My and Mz. All values are applicable for speeds up to 0, m/s. A requirement for using these values is a smooth movement of the mass over the whole stroke length of the cylinder. The reference point from which the moments for all cylinders should be calculated is the centre line of the piston. Mz Total loads When a LINTRA Cylinder has to take several loads and moments, an additional calculation is necessary using the following formula: Mx My Mz Fy Fz Mx max My max Mz max Fy max Fz max Thrust, air consumption, cushion length, loading values Ø Theoretical forces (N) at 6 bar Air consumption (l/cm) per stroke at 6 bar Cushion length (mm) Loading values (N) Fy Fz (N) Mx (Nm) My (Nm) Mz (Nm) , , , Loading values applicable to a speed of 0, m/s. Maximum working life is normally reached below a speed of m/s. Cylinder deflection Deflection due to external force. Deflection due to cylinder weight. F (N) 000 f (mm) 000 f= mm ø5 ø3 ø ,6 0, ø40 ø3 0, Supported length (mm) 0 ø Supported length (mm) (mm) Cylinder Ø 3 mm, stroke length 3500 mm, external load 00 N Maximum distance between supports = 500 mm (see diagram). Therefore additional support is required. Cylinder Ø 40 mm, external force 0 N, distance between supports 500 mm Required: Total deflection. Deflection due to external force (f): See diagram apple (mm/90 N) 0 N,3 mm. Deflection due to cylinder weight (f): See diagram apple 0,6 mm Total deflection:,9 mm Maximum permitted deflection: f f mm per 000 mm stroke Result:,9 mm are below the max. permitted deflection of,5 mm Konstruktionsänderungen vorbehalten N/UK

5 Basic dimensions /... Standard Cylinders E M A G G M Z O W S S R AE D T C S B R E N x A # # Stroke Cushion screw Ø A AE B C D (Port threads)* E E G M M 5 7,5 53, 3,5 7 G /8 /8 NPT 00 40, ,5 67,8 3,5 7 G /8 /8 NPT ,5 79,3 9 9,5 G /4 /8 NPT Ø N O R S S T W Z kg at 0 mm kg per 00 mm 5 M5-7 deep ,5 M4-3,5 5,6 6,4 0,60 0,5 3 M6-0 deep 46, M6-3,5 33,5 9,5 0,90 0,5 40 M6-0 deep 58 65,5 48 8,75 M6-9 40,8 4,8,40 0,35 * Optional ISO G or NPT-thread N/UK

6 Mountings QM/44000/ Foot mounting type C Q44000AAAAAM33 Centre support mounting type V A - B AR AD AE AH AJ AK AL ø U AA AN ø AS AB R AP AF AC AG Adjustable Type (C) Ø AA AB AC AD AE R Ø U kg QM/4405/ 5 8, ,5 4 5,5 0,04 QM/4403/ , ,09 QM/4405/ , ,5 9 0,3 Type (V) Ø AF AG AH AJ AK AL AN AP AR Ø AS kg QM4405AAAAAM , , ,6 0,07 QM4405AAAAAM , ,5 QM44040AAAAAM , ,5 QM44000AAAAAM337 Swinging bridge mounting type S BA BB BC BF BD BE BJ BG BH Fx Type (S) Ø BA BB BC BD (Din74) BE BF BG BH BJ Fx kg QM4405AAAAAM BM 5 ± N 0,5 QM4403AAAAAM BM 6 ± , N 0,0 QM44040AAAAAM BM 6 ± N 0,5 N/UK

7 Spares Model Spares kit Comprising Seal strip Cover strip Barrel Ø Item Description Quantity Item 8 Item 9 Item 4 5 M/4405/M Q4405AACAAS788 8/9 Seal/cover strip / M/P 468/* M/P 463/* M/P 4933/* 3 M/4403/M Q4403AACAAS788 /5 Piston/cushion seal / M/P 469/* M/P 463/* M/P 4934/* 40 M/44040/M Q44040AACAAS788 3 O-Ring M/P 4630/* M/P 4633/* M/P 4935/* 37 Cover Grease * Insert stroke length Note: Spares kits are common for all cylinder types Please quote the cylinder type number when ordering spare parts Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under Technical Data. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. N/UK

A44000, LINTRA-LITE Rodless Cylinders Non-magnetic and Magnetic Piston, double acting

A44000, LINTRA-LITE Rodless Cylinders Non-magnetic and Magnetic Piston, double acting > > Ø 25... 40 mm > > New compact, spacesaving design > > Proven sealing system > > Integral switch mounting > > uffer or adjustable cushioning > > Standard foot mountings Technical features Medium: Compressed

More information

M/46800/M, M/46800/HM, M/46800/PM

M/46800/M, M/46800/HM, M/46800/PM External guides for heavy loads over long distances Rigid, reinforced aluminium profile provides greater load support T-slots in the outer profile enable individual mounting options Precision guidance

More information

M/46900/IA, M/46900/M

M/46900/IA, M/46900/M TWIN-LINTR Rodless Cylinders Non-magnetic and Magnetic Piston Double acting Ø 25 and 4 mm Double stroke compared with conventional cylinders Design covered by patent Maximum stroke length from minimal

More information

M/146000, M/146100, M/146200

M/146000, M/146100, M/146200 LINTR PLUS rodless cylinders Magnetic piston and non-magnetic piston Double acting Ø 3 to 50 mm New lightweight design extrusion with universal mounting grooves Proved and patented sealing system Dust

More information

RM/57200/M, RT/57200/M

RM/57200/M, RT/57200/M Roundline Cylinders Magnetic Piston Double Acting Ø 8 to 63 mm Three different basic versions provide flexibility and wide range of application Magnetic piston as standard provides a wide range of control

More information

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation

More information

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane

More information

Our policy is one of continued research and development. We therefore reserve the right 10/99 N

Our policy is one of continued research and development. We therefore reserve the right 10/99 N Stainless Steel ISO Cylinders Magnetic Piston Double Acting Ø 12 to 25 mm High corrosion and acid resistance Magnetic piston as standard Conforming to ISO 6432 Suitable for applications in the Food Industry

More information

LAP4, LAP8. Pneumatic linear drive sizes 4 and 8

LAP4, LAP8. Pneumatic linear drive sizes 4 and 8 Pneumatic linear drive sizes 4 and Torsional and bending resistant profiles T-slots in the outer profile enable individual mounting options Adjustable guiding system (LAP4) Precise linear roller guiding

More information

RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm

RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and

More information

PRA/182000, PRA/182000/M

PRA/182000, PRA/182000/M Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting Ø 32 to 125 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders

More information

Lintra Rodless Cylinder Series 46000B, 46100B, and 46200B

Lintra Rodless Cylinder Series 46000B, 46100B, and 46200B Section 10 Lintra Rodless Cylinder Series 46000B, 46100B, and 46200B Proven Applications...ACT-10-2 Features...ACT-10-4 Specifications...ACT-10-5 Series 46000B Internally Guided Carriage...ACT-10-6 Series

More information

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm

More information

Our policy is one of continued research and development. We therefore reserve the right

Our policy is one of continued research and development. We therefore reserve the right Corrosion resistant design Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Magnetic Piston Double Acting Ø 32 to 100 mm Accepted in the Food Industry Conforms to ISO 6431, VDMA 24562 and NFE

More information

KA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK

KA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for

More information

LRM/55401/M, Roundline cylinder Magnetic piston, double acting

LRM/55401/M, Roundline cylinder Magnetic piston, double acting LRM/5540/M, Roundline cylinder > > 3... 00 mm > > Clean line design > > Low friction, long life seals > > Standard magnetic piston for full control system versatility > > Non-lube operation > > Shock and

More information

Our policy is one of continued research and development. We therefore reserve the right to amend,

Our policy is one of continued research and development. We therefore reserve the right to amend, Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed

More information

M/ Rotary cylinders Rack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 125 mm

M/ Rotary cylinders Rack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 125 mm otary cylinders ack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 25 mm Suitable torques from,2 to 5,0 Nm/bar otation angles 90, 80, 270, 360 Adjustable cushioning Male and female

More information

Our policy is one of continued research and development. We therefore reserve the right 1/98 N

Our policy is one of continued research and development. We therefore reserve the right 1/98 N ISO Cylinders Magnetic Piston Single Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Nose mounting nut and piston rod locknut as standard Technical Data Medium:

More information

PRA/182000, PRA/182000/M

PRA/182000, PRA/182000/M Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush

More information

LPRA/182000/M Double acting profile cylinders Ø mm

LPRA/182000/M Double acting profile cylinders Ø mm Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO

More information

RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm

RA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and

More information

10/97 N Our policy is one of continued research and development. We therefore reserve the right

10/97 N Our policy is one of continued research and development. We therefore reserve the right ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting

More information

M/146000/EX, M/146100/EX, M/146200/EX, LINTRA PLUS cylinder Magnetic & Non-magnetic piston, double acting

M/146000/EX, M/146100/EX, M/146200/EX, LINTRA PLUS cylinder Magnetic & Non-magnetic piston, double acting M/46000/X, M/4600/X, M/4600/X, LINTR PLUS cylinder > Ø 6... 80 mm > New lightweight design extrusion with universal mounting grooves > Proved and patented sealing system > Interchangeability with series

More information

PRA/182000, PRA/182000/M

PRA/182000, PRA/182000/M Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush

More information

ACT-72. DA/8000 Double acting Ø mm

ACT-72. DA/8000 Double acting Ø mm ISO/VDMA Cylinders DA/8000 Double acting Ø 32... 320 mm Conforms to ISO 6431, VDMA 24562 and NFE 49-003-1 High performance, ruggedness and reliability Extensive range of mountings Technical data Medium:

More information

Double acting. Compressed filtered air with or without lubrication. Lubrication, if be used, must be continous.

Double acting. Compressed filtered air with or without lubrication. Lubrication, if be used, must be continous. Double acting Standard executions Version Symbol Type Parallel from bore 25 mm. S4 On request, they can be supplied according Directive 94/9/EC - ATEX II 2 GDc T5 Options Special versions on request Suffix

More information

PVA/182000, PVA/182000/M

PVA/182000, PVA/182000/M Smooth Line cylinders with or without integrated switches Double acting Ø 3... 100 mm Smooth and spherical profile design with concealed tie rods Special polyurethane wiper seal Body sealing conforms to

More information

S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable

S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion

More information

Available: Cylinders till july 2000 Spares till july /98 N

Available: Cylinders till july 2000 Spares till july /98 N Available: Cylinders till july 2000 RM/55400/M Roundline Cylinders Magnetic Piston Double Acting 32 to 100 mm bore Magnet piston as standard provides a wide range of control options Attractive clean- line

More information

Lintra-Lite Actuators Series A44000, Rodless Cylinders Double Acting

Lintra-Lite Actuators Series A44000, Rodless Cylinders Double Acting Section 11 Lintra-Lite Actuators Series A44000, Rodess Cyinders Doube Acting LINTRA -LITE Series A44000 Rodess Cyinders Series A44000 Features...ACT-11-2 Series A44000 Specifications...ACT-11-3 Series

More information

RM/900/M Heavy duty cylinders Ø 1 1/4... 4

RM/900/M Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting

More information

12/95 N Our policy is one of continued research and development. We therefore reserve the right

12/95 N Our policy is one of continued research and development. We therefore reserve the right Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure

More information

ACTUATORS. Magnetically Operated Switches

ACTUATORS. Magnetically Operated Switches 1 Magnetically Operated Switches Magnetically operated, non-contact sensing system Consists of a magnet on the piston, and a sensing switch mounted to the cylinder tube Switch types: Read switch Solid

More information

ISO 6432 Ø mm. Page 9. Ø mm. RM/91000/M, RM/93000/M Ø mm. Ø mm ISO, VDMA, NFE. ISO, VDMA, NFE Ø 32...

ISO 6432 Ø mm. Page 9. Ø mm. RM/91000/M, RM/93000/M Ø mm. Ø mm ISO, VDMA, NFE. ISO, VDMA, NFE Ø 32... Actuators Product selector table...2 Single acting cylinders Miniature roundline cylinders ( 2,5 & 4 mm)...9 ISO Roundline ( 10 to 25 mm)...10 Roundline ( 8 to mm)...20 VDMA compact ( 20 to 63 mm)...32

More information

NFPA Double acting imperial cylinders

NFPA Double acting imperial cylinders > > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,

More information

M/1000, Heavy Duty Cylinders Double Acting

M/1000, Heavy Duty Cylinders Double Acting > > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.

More information

Strokes (mm) N/en

Strokes (mm) N/en IVC cleanline Cylinder double acting, magnetic piston 32... 100 mm Cylinders and mountings conform to ISO 15552 Complete functional unit with LED display Central electrical connector, polarity-safe Integrated

More information

LPRA/182000/M, ISO cylinder Magnetic piston, double acting

LPRA/182000/M, ISO cylinder Magnetic piston, double acting > > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE

More information

The Product Range. Technical Data

The Product Range. Technical Data The Product Range Section 3.1 - Basic Cylinder Bore sizes (mm): 10, 16, 25, 32, 40, 50 The basic cylinder series satisfies the support and guidance requirements of a great diversity of applications. Various

More information

1/96 N Our policy is one of continued research and development. We therefore reserve the right

1/96 N Our policy is one of continued research and development. We therefore reserve the right Roundline Cylinders Magnetic Piston Double cting 8 to 63 mm Very compact and shorter than the basic length of a corresponding ISO/VDM and roundline cylinder. Magnetic piston as standard provides a wide

More information

PRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting

PRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting > > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance

More information

Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel:

Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel: Air Cylinders Precision Engineered Fine Quality Excellent Prices Advanced Design connects fluid power to industrial automation Tel: 650-856 8833 www.stcvalve.com H1 83 Contents Air Cylinder Numbering System

More information

PRA/822000/M, PRA/ Smoothline cylinder Magnetic or non-magnetic piston, double acting

PRA/822000/M, PRA/ Smoothline cylinder Magnetic or non-magnetic piston, double acting P/822000/M, P/822000 Smoothline cylinder > 32... 00 mm > Cylinder and mounting conform to ISO 5552 > eed or solid state switches can be mounted flush with the profile barrel > lternative air ports as standard

More information

LRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting

LRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting > > Ø 32... 320 mm > > Comprehensive range for the utmost versatility > > Wide temperature range > > Supplied complete with piston rod locknut > > Conforms to ISO 15552 (ISO 6431, VDM 24562 and NFE 49-003-1)

More information

Standard Cylinders DNC Inch Series, to ISO 15552

Standard Cylinders DNC Inch Series, to ISO 15552 Standard Cylinders DNC Inch Series, to ISO 5552 DNC Standard Cylinders meet ISO 5552 mounting, rod, bore and thread dimension specifications for easy interchangeability. Piston ¼ to 2½ Strokes of up to

More information

Interchangeability Versatility Durability Integration LINTRA PLUS ADVANTAGE

Interchangeability Versatility Durability Integration LINTRA PLUS ADVANTAGE Interchangeability Versatility Durability Integration LINTRA PLUS ADVANTAGE 02 LINTRA PLUS LINTRA PLUS RELIABLE, DURABLE & PROVEN LINTRA Plus builds on the well-proven reputation of Norgren s existing

More information

RODLESS CYLINDER SERIES PU ACTUATORS

RODLESS CYLINDER SERIES PU ACTUATORS RODLESS CYLINDER SERIES PU 1 RODLESS CYLINDER SERIES PU RODLESS CYLINDER SERIES PU Series PU rodless cylinders have an internal strip for longitudinal tightness made of polyurethane (PU) with a harmonic

More information

Double-acting, magnetic, cushioned ø16, 25, 32, 40, 50, 63, 80

Double-acting, magnetic, cushioned ø16, 25, 32, 40, 50, 63, 80 > Cylinders Series 50 CATALOGUE > Release 8.5 Rodless cylinders Series 50 Double-acting, magnetic, cushioned ø6, 25, 32, 40, 50, 63, 80»» Four ports on each chamber»» Possibility to supply both chambers

More information

Compact Cylinders ADN Inch Series, Based on ISO Overview

Compact Cylinders ADN Inch Series, Based on ISO Overview Compact Cylinders ADN Inch Series, Based on ISO 2287 Overview Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation space

More information

Associated ranges. Body material. Stainless steel Aluminium

Associated ranges. Body material. Stainless steel Aluminium Associated ranges Series Body material Stainless steel Aluminium KA/8000,.../M Stainless steel tie-rod cylinders (ISO/VDMA) Double acting Ø 32 to 200 mm 216 KM/8000/M Stainless steel roundline cylinders

More information

RT Series Roundline Plus Thrusters

RT Series Roundline Plus Thrusters 9/16" to 3" bore Composite and Roller Bearings PS magnetic piston option Optional ecology seal Optional shock absorbers Choice of high load composite or precision low friction bearings Comes with stroke

More information

Active and Passive Brakes Series OSP-P

Active and Passive Brakes Series OSP-P Active and Passive Brakes Series OSP-P Contents Description Data Sheet No. Page Overview P-1.42.001E 69-70 Standard cylinder with Active brake P-1.42.002E 71-74 Plain bearing SLIDELINE with Active brake

More information

Pneumatic cylinders Compact cylinders Series P1J

Pneumatic cylinders Compact cylinders Series P1J Pneumatic cylinders Series P1J Catalogue 9127007282GB-ul Through mounting holes, tapped at both ends, for cylinder mounting. Return spring for single-acting variants. Stainless steel piston rod. Low-friction

More information

ISO CYLINDERS Ø ACTUATORS

ISO CYLINDERS Ø ACTUATORS ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration

More information

SBM TECHNOLOGY Cooling / Air Recovery Valve

SBM TECHNOLOGY Cooling / Air Recovery Valve SBM TECHNOLOGY Cooling / Air Recovery Valve Part no. VSP15203x Advanced high pressure seal technology Integrated non-return valve Robust, compact & lightweight design Proven & reliable technology Maintenance

More information

Heavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return

Heavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line

More information

Rodless cylinders. Series General. Construction characteristics. Technical characteristics. Use and maintenance

Rodless cylinders. Series General. Construction characteristics. Technical characteristics. Use and maintenance Series 1600 Rodless cylinders General The purpose of producing a rodless cylinder is to provide a space saving option over conventional cylinders. On a traditional rod type cylinder, the total space occupied

More information

ACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /

ACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / / Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible

More information

P1E Series ISO Cylinders

P1E Series ISO Cylinders High fibre nitrile Combined cushion/ Aluminium tube to Zinc diecast end plates Retained cushion piston rod seal non return seal for give high strength on 32, & 50mm bore adjusting screw allows a and polyurethane

More information

-V- New. Linear drives DGC Features. 2 Internet:

-V- New. Linear drives DGC Features. 2 Internet: Linear drives DGC Features At a glance Without external guide, for simple drive functions Compact fitting length relative to stroke Fully interchangeable with the linear drive DGP Easy assembly and installation

More information

FAST Program 2013 Festo Assured Shipping Time

FAST Program 2013 Festo Assured Shipping Time FAST Program 203 Festo Assured Shipping Time TM A complete line of automation components available when you need them! FAST TM Program 203 Festo Assured Shipping Time A complete line of automation components

More information

M/1525, M/1540. Fixed Range Positioner Cylinders Double Acting 2 1 /2", 4" bore. Robust and reliable for long, maintenance free life

M/1525, M/1540. Fixed Range Positioner Cylinders Double Acting 2 1 /2, 4 bore. Robust and reliable for long, maintenance free life Robust and reliable for long, maintenance free life High positioning speeds Fixed Range Positioner Cylinders Double Acting 2 1 /2", 4" bore Vibration resistant Square, clean line design makes them suitable

More information

aluminum guide carriage cover with wiper and grease nipple roller hardened steel rail Example: PS 25/35 width of guide rail (35 mm)

aluminum guide carriage cover with wiper and grease nipple roller hardened steel rail Example: PS 25/35 width of guide rail (35 mm) Technical Data Versions for pneumatic linear drive: Series OSP-P aluminum guide carriage Roller Guide Powerslide Loads, Forces and Moments aluminum clamping rail hardened steel rail roller cover with wiper

More information

INTEGRATED HYDRAULIC BRAKE

INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The

More information

Linear/swivel clamp CLR

Linear/swivel clamp CLR Key features Functional description The linear/swivel clamp CLR is used for all types of clamping. Through the combination of the linear and swivel motion of the piston rod, it is possible to insert and

More information

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16 to 3 bore. Technical features Medium: Filtered, lubricated or nonlubricated, F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200

More information

Our policy is one of continued research and development. We therefore reserve the right to

Our policy is one of continued research and development. We therefore reserve the right to D/99000, D/99000 ompact cylinders on-magnetic and magnetic piston Double acting Ø 12 to 160 mm ight weight ompact design, which is considerably shorter than IS/VDA or FA equivalent. ow friction characteristics

More information

Max. particle size 5 µm. Pressure for determining piston forces. Materials:

Max. particle size 5 µm. Pressure for determining piston forces. Materials: Rodless cylinders Rodless cylinder 1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³

More information

97300 NAMUR 3/2 & 5/2 way spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, NAMUR Interface

97300 NAMUR 3/2 & 5/2 way spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, NAMUR Interface 9700 NAMUR / & / way spool valves electromagnetic actuated, indirectly controlled G /, / NPT, NAMUR Interface For single and double acting actuators / or / way function in one valve Easily interchangeable

More information

Linear drives DGC Key features

Linear drives DGC Key features Linear drives DGC Linear drives DGC Key features General information Compact fitting length relative to stroke Loads and devices can be directly mounted on the slide Three types of cushioning available:

More information

26220, 26230, For single- and double-acting drives. Standard manual override with detent. Compact design. Exhaust air silencers.

26220, 26230, For single- and double-acting drives. Standard manual override with detent. Compact design. Exhaust air silencers. 60, 60, 8007 For single- and double-acting drives /, / and / Directional Control Valves Modular NAMUR design Actuation: Electromagnetic Indirectly controlled spool valves Connections G /8, G /, / NPT Standard

More information

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LL)

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LL) LL RE-CIRCULATING BALL BEARING (SERIES LL) Patented re-circulating ball bearing guide system. Excellent price / performance ratio. Several T-nut mounting options. Optional mounting accessory kits are available.

More information

INTEGRATED HYDRAULIC BRAKE ACTUATORS

INTEGRATED HYDRAULIC BRAKE ACTUATORS INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit

More information

THD. Series. Heavy Duty Actuators. Pneumatic Actuators for Quarter-Turn Valves and Dampers CONTROLS. Torques to 1,600,000 In-lbs

THD. Series. Heavy Duty Actuators. Pneumatic Actuators for Quarter-Turn Valves and Dampers CONTROLS. Torques to 1,600,000 In-lbs CONTROLS Division of A-T Controls, Inc. THD Series Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 In-lbs Double Acting and Spring Return Symmetric and

More information

OSPE..BHD Belt-Driven Actuators

OSPE..BHD Belt-Driven Actuators OSPE..BHD Belt-Driven Actuators Actuators for High-Speed, Long Travel, Heavy Duty Applications The OSPE..BHD is the highest capacity belt-driven actuator in the OSPE family. The integrated ball bearing

More information

GRIPPERS SERIES P3 - P12 ACTUATORS

GRIPPERS SERIES P3 - P12 ACTUATORS GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made

More information

Linear drives DGPL Selection aid

Linear drives DGPL Selection aid Linear drives DGPL Linear drives DGPL Selection aid General Compact, fitting length relative to stroke Highly adaptable thanks to wide choice of mounting and attachment options Adjustable end-position

More information

Active and Passive Brakes Series OSP-P

Active and Passive Brakes Series OSP-P Active and Passive Brakes Series OSP-P Contents Description Page Overview 51-52 Standard cylinder with Active brake 53-56 Plain bearing SLIDELINE with Active brake 33-34 Aluminium roller guide PROLINE

More information

Optimized for OEM requirements at a lower price.

Optimized for OEM requirements at a lower price. The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO

More information

High pressure valves. 80 to 350 bar

High pressure valves. 80 to 350 bar 80 to 350 bar High switchable p Hermetically sealed poppet valves Excellent repeatability of switching times Function even with lager voltage tolerance Compact design DN to DN 40 Technical data Medium:

More information

124

124 124 www.danahermotion.com Linear Units Linear Rod Units VarioLine, Movotrak Linear units with rod Perfect for hydraulics and pneumatics replacement Load up to 40 000 N High accuracy ball screw drive High

More information

Linear drives DGC-K. Festo core product range Covers 80% of your automation tasks

Linear drives DGC-K. Festo core product range Covers 80% of your automation tasks q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch

More information

QA/8000. Guide blocks with plain bearings/ roller bearings Ø 32 to 100 mm

QA/8000. Guide blocks with plain bearings/ roller bearings Ø 32 to 100 mm Guide blocks with plain bearings/ roller bearings Ø 3 to mm Conorms to ISO 643, VDMA 46 and NFE 49 3 Ensures protection against external rotary and bending orces Guide rods run through bearings protected

More information

ORIGA Pneumatic Linear Drives OSP-L

ORIGA Pneumatic Linear Drives OSP-L ORIGA Pneumatic Linear Drives OSP-L Very long lifetime and lowest leakage A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility.

More information

N/** поставка оборудования для подготовки воздуха

N/** поставка оборудования для подготовки воздуха M/0000 Series Inline /, 5/ and 5/ Spool Valves Solenoid and Pilot Actuated G / Low power solenoids High flow Unique steel reinforced seals Light weight corrosion resistant materials Technical Data Medium:

More information

AUTO STAR with central connector M12x1

AUTO STAR with central connector M12x1 with central connector M2x Non corrosive spool and sleeve for long trouble free life 5/2 and Glandless Valves Actuated Sub-base Mounted ISO 5599- #, #2, #3 6 bar (4,5 W) and 0 bar (2 W) 24V DC solenoids

More information

A5 BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK

A5 BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK Belt-driven rodless electric axis with a V-Lock interface. The structure features an extremely lightweight yet high-strength anodised aluminium extruded

More information

Profile guide/actuator - RK Compact

Profile guide/actuator - RK Compact Profile guide/actuator - RK Compact Slimline short-stroke linear actuator for hand adjustment with excellent price-performance ratio Control knob with vernier Simple adjustment of carriage Backlash of

More information

KNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS

KNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions

More information

Linear drives DGC-HD, with heavy-duty guide

Linear drives DGC-HD, with heavy-duty guide Linear drives DGC Key features At a glance New heavy-duty design for: Maximum loads and torques thanks to duo rail guide Long service life Ideal as a basic axis for linear gantries and cantilever axes

More information

Short-stroke cylinders ADVC/AEVC

Short-stroke cylinders ADVC/AEVC Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing

More information

Guide blocks for ISO/VDMA cylinders

Guide blocks for ISO/VDMA cylinders Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection

More information

Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287

Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation

More information

PRA/882000/M/EX, IVAC Clean Line cylinder Magnetic piston, double acting

PRA/882000/M/EX, IVAC Clean Line cylinder Magnetic piston, double acting > ø 3... 100 mm > Complete functional unit with LED display > TEX-zones depending on pilot control: zones &, II 3GD, Valve control module (VCM) zones 1 & 1, II GD, Pilot control on separate specification

More information

NAMUR FLANGE: With integrated exhaust air recirculation Ordering information

NAMUR FLANGE: With integrated exhaust air recirculation Ordering information 00 TÜV-approval based on IEC 6 08, DIN V 9 Approvals: DIN EN 6/9 DVGW, group Rm and EN 6 Valves for safety systems to SIL or AK 7 / Directional control valves Actuation: electromagnetic Directly controlled

More information

* prearranged only for chromium-plated steel rods * the new series is completely interchangeable

* prearranged only for chromium-plated steel rods * the new series is completely interchangeable Locking units A product which combines the familiar and traditional aspect of the UNIVER locking unit and a new and revolutionary elastic heart capable to improve its performances under every point of

More information

MXP BAND CYLINDER MAXIMUM DURABILITY N INTERNAL BEARING S SOLID BEARING P PROFILED RAIL ENGR PB CC MG LS BC4 BC3 BC2 MXP ABT.

MXP BAND CYLINDER MAXIMUM DURABILITY N INTERNAL BEARING S SOLID BEARING P PROFILED RAIL ENGR PB CC MG LS BC4 BC3 BC2 MXP ABT. www.tolomatic.com MXP BAND CYLINDER N INTERNAL BEARING S SOLID BEARING P PROFILED RAIL CONTENTS N Internal Bearing Features... MXP_2 S Solid Bearing Features... MXP_4 P Profiled Rail Features... MXP_6

More information

Brochure. Compact Cylinders. Setting a new standard for: Quality Reliability Value Global Compatibility

Brochure. Compact Cylinders. Setting a new standard for: Quality Reliability Value Global Compatibility Brochure Compact Cylinders Setting a new standard for: Quality Reliability Value Global Compatibility Actuators - Compact Cylinders How to Order MODEL MACQ - Compact Cylinder MAGNET Blank - No Magnet S

More information

Compact cylinders ADN/AEN, to ISO 21287

Compact cylinders ADN/AEN, to ISO 21287 Compact cylinders ADN/AEN, to ISO 21287 Compact cylinders ADN/AEN, to ISO 21287 Key features At a glance Sensor slots on three sides for flush mounting of proximity sensors Centring hole in the end cap

More information