26230, NAMUR 3/2 & 5/2 Indirect solenoid actuated spool valves

Transcription

1 60, 8007 NAMUR / & / > > Port size: G/ and NAMUR interface > > Easily interchangeable solenoid system > > For single and double operated actuators > > Standard manual override with detent > > Maintenance-free > > Valves and solenoids are ATEX approved (see table) > > Simple design of soft spool seal system > > Compact design, high flow rate Technical features Medium: Compressed air, filtered, lubricated or non-lubricated Operation: Solenoid, indirectly controlled Operating pressure:... 8 bar ( psi) Orifize: 6 mm Port size: G / NAMUR Interface with integrated exhaust air Mounting position: Optional, preferably with solenoid on top Flow direction: Fixed Electrical connection: See solenoid table Ambient/Media temperature: C ( F) Solenoid: see solenoid table Air supply must be dry enough to avoid ice formation at temperatures below C (+ F). Materials: Housing: Aluminium Pilot flange: Plastic Seat seal: NBR Technical data Symbol Ports, () () Actuation Nominal size Operating pressure (bar) kv-value (Cv (US) kv x,) Weight (kg) Dimension No. Model *) G / Flange Solenoid indirectly controlled , 0, G / Flange Solenoid indirectly controlled , 0, 6077 G / Flange Solenoid indirectly controlled , 0,9 677 / or / way function (conversion instruction see page 6) Symbol Ports, () () Actuation Nominal size Operating pressure (bar) kv-value (Cv (US) kv x,) Weight (kg) Dimension No. Model *) G / Flange Solenoid indirectly controlled , 0, 6079 G / Flange Solenoid indirectly controlled , 0,9 679 *) When ordering please indicate solenoid, voltage and current type (frequency). without notice, the specifications given in this document. (00-9d) 0 Norgren GmbH 6/ en..0.0

2 60, 8007 NAMUR / & / Solenoid actuators Power consumption V d.c. 0 V a.c. (W) (VA) Rated current V d.c. 0 V a.c. (m A) (m A) Protection class IP/NEMA,8 70 IP6 (with,6 0 IP6 (with Ex-Protection (ATEX-Category) Temperature Ambient/ Media ( C) Electrical connection Connector DIN EN 70-80, form B *) Connector DIN EN 70-80, form A *) Weight Drawing Circuit diagram Model (kg) No. No. 0, 00 0, 06,7 IP6 (with II G Ex mb IIC T Gb II D Ex mb tb T9 C Db *) Cable length m 0, 06, 9 IP6 (with II G Ex mb IIC T Gb II D Ex mb tb T9 C Db *) Cable length m 0, 06 Approvals,7 IP66 (with Standard voltages (±0%) V d.c., 0 V a.c., other voltages on request. *) Connector is not scope of delivery, see table»accessories«model Approvals Datasheet ATEX IECEx FM 06x PTB 0 ATEX 0 N/en x EC-Declaration of Conformity N/en Connector *) Mx, DIN IEC Solenoid with yellow LED 0, 7 07 Accessories Connector Form A M x Silencer Flange plate Yoke Page 7 Page 7 Page (form A) 00 (without cable) 006 (90, wi hout cable) M/S G/ (NAMUR single connection plate) (form B) 007 ( m cable) 008 (90, m cable length) 0679 (NAMUR-rip use in combination wi h 06790, Alu) 00 ( m cable) 00 (90, m cable length) en..0.0 without notice, the specifications given in this document. (00-9d) 0 Norgren GmbH 6/

3 60, 8007 NAMUR / & / Dimensions Valves 6 6 G/ ø9, ø, M ø 9, ø, ø, G/ 6 G/ M ø,, ø9, ø, M ø, 7 0, Solenoid 90 turnable Manual override with detent NAMUR centering hole ø9, ø, 7 0 6/ without notice, the specifications given in this document. (00-9d) 0 Norgren GmbH en..0.0

4 60, 8007 NAMUR / & / 6, G / ø ø ø 9, M 7 6 G / ø ø 9, M ø Solenoid 90 turnable Manual override with detent NAMUR centering hole en..0.0 without notice, the specifications given in this document. (00-9d) 0 Norgren GmbH 6/

5 60, 8007 NAMUR / & / Dimensions Solenoid operators , 9, 9, 7 0 Ø9 Ø9 8, 0 9,, 9, Mx ~ 6 Connector x 90 turnable Electrical connection M x Pin Signal Cable + UB brown Out (PNP) / analogue to 0 ma white 0 Volt blue Out (PNP) black Circuit diagrams 7 6/ without notice, the specifications given in this document. (00-9d) 0 Norgren GmbH en..0.0

6 60, 8007 NAMUR / & / NAMUR hole pattern (driving side) M Port (A) Coding stud threaded M (0 deep) Port (R) NAMUR quick exhaust module for a better kv-value by exhaust see data sheet..80 NAMUR interlinking plates in redundancy design for»safety exhausting«and»safety ventilating«see data sheet..80 Conversion instructions of / into / way function / way function (original mode of supply) / way function / / / resp. / way function can be achieved just by swapping enclosed adaptor plates. Make sure Marker and Arrow do match as shown on above drawing. Original mode of supply: / function. 6 Arrow 7 Marker en without notice, the specifications given in this document. (00-9d) 0 Norgren GmbH 6/

7 60, 8007 NAMUR / & / Single connection plate Model: NAMUR slot Model: , M (x) 0, G / 9,, 6 9,,, ø 9, 9 ø, G / 60 ø 9 ø, 7 Yoke Model: x 0 M 0 Silencer Model: M/S, 8 ø, / Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. 6/ without notice, the specifications given in this document. (00-9d) 0 Norgren GmbH en..0.07