98025 NAMUR/INLINE 3/2 way poppet valves electromagnetic actuated, indirectly controlled G 1/2, 1/2 NPT or flanged with NAMUR Interface

Transcription

1 9805 NMUR/INLINE / way poppet valves electromagnetic actuated, indirectly controlled G /, / NPT or flanged with NMUR Interface Main application: single operated actuators TÜV-approval based on type examination PED 97//E and IE Valves for safety systems multi-channel up to SIL dd-on manual override or inductive limit switches Suited for outdoor use under critical environment conditions (see solenoid list) These solenoid valves are applicable in Ex protection class TEX (categories II GD and II GD) and other international approvals DIN EN 6508 IE 6508 pproval depends on magnetic system, see page and! Technical features Medium: Filtered, non-lubricated and dried compressed air, instrument air, nitrogen and other non-flammable neutral, dry fluids Operation: Indirect solenoid operated poppet valves with external pilot port Operating pressure:... 8 bar bar with external air supply, control pressure, bar Orifice: 8 mm Port size: G /, / NPT or NMUR Interface with integrated exhaust air Flow: See technical data on page Flow direction: Fixed Mounting position: ny, but preferably with solenoid vertical Fluid/mbient temperature: (special perbunan) (SIL version) Depending on solenoid system ir supply must be dry enough to avoid ice formation at temperatures below +. For outdoor installations must be protected all connections against the penetration of moisture and a solenoid with IP66 protection must be used! Materials: Housing: stainless steel.0 (6L), brass.00 (Ms 58), luminium anodized.065 Seal: SNBR (special perbunan) Inner parts: stainless steel 0/ d without notice, the specifications given in this document. 0 Norgren GmbH N/en

2 9805 NMUR/INLINE Technical data / way indirect solenoid operated poppet valves Symbol Port size, () Flow (l/min) *)»» Flow (l/min) *)»» Materials Test certification IE 6508 Weight (kg) Dimension No. Model *) G /, G/ NMUR G/ luminium x 0, / NPT, / NPT NMUR / NPT luminium x 0, G /, G/ NMUR G/ Stainless steel x, / NPT, / NPT NMUR / NPT Stainless steel x, G /, G/ NMUR G/ P into flange plate luminium x 0, G / G / luminium x 0, / NPT / NPT luminium x 0, G / G / Stainless steel x, / NPT / NPT Stainless steel x, G / G / Brass x, / NPT / NPT Brass x, / way indirect solenoid operated poppet valves with exhaust guad Symbol Port size, () G /, G/ NMUR G/ P into flange plate Flow (l/min) *)»» Flow (l/min) *)»» Materials Test certification IE 6508 Weight (kg) Dimension No. Model *) luminium 0, / way indirect solenoid operated valves using low-power pilot system in protection class Ex ia II T/T6 Suitable solenoid actuators see page only Symbol Port size, () Flow (l/min) *) to to Flow (l/min) *) to to Materials Test certification IE 6508 Weight (kg) Dimension No. Model *) G /, G / NMUR G / luminium 0, / NPT, / NPT NMUR / NPT luminium 0, G / G / luminium 0, / NPT / NPT luminium 0, Flow conducted according to ISO 658 and ISO 8778, 0 In order to ensure full flow and proper function make sure that sufficient pressure supply with feed pipe diameters according to the port size is available. *) Ordering information see below *) Inlet pressure 6 bar, outlet pressure 5 bar *) Inlet pressure 8 bar, outlet pressure 0 bar Option selector Materials Substitute luminium 5 Brass 6 Stainless steel 7 Special version *) 8 Port size Substitute NMUR, G/ 0 NMUR, / NPT G/ 5 / NPT 6 Version Substitute Standard 5 Low power version 9 Voltages Substitute V d.c V a.c Solenoids Substitute See table above *) Norgren internal use. Port size and other features shown under version are different. E.g : Valve with inlet filter and exhaust guards according to customer requirement. N/en without notice, the specifications given in this document. 0 Norgren GmbH d 0/

3 9805 NMUR/INLINE Solenoid operators Power consumption V d.c. 0 V a.c. (W) (V) Rated current V d.c. 0 V a.c. (m ) (m ),9, *5) 78 IP 65 (with connector) onnector DIN EN form *5), *6),6 50 IIG IID,6 8 IIG IID 0,8 8 IIG IID, 6 IIG IID 0,8 IIG IID 0,8 IIG IID, 6 IIG IID, 6 IIG IID Stainless steel 0,8 IIG IID, 6 IIG IID Ex-Protection IP-Protection class (to EN 6059) Ex-Protection (TEX-ategory) Ex mb II T Gb Ex mb III T0 Db IP 66 Ex mb II T Gb Ex mb III T0 Db IP 66 Ex e mb II T/T5 Gb Ex tb III T0 Db, Ex e mb II T/T5 Gb Ex tb III T0 Db, Ex d mb II T/T6 Gb Ex e mb II T/T6 Gb Ex tb III T0 Db Ex d mb II T/T6 Gb Ex e mb II T/T6 Gb Ex tb III T0 Db Ex d mb II T/T6 Gb Ex e mb II T/T6 Gb Ex tb III T0 Db Ex d mb II T/T6 Gb Ex e mb II T/T6 Gb Ex tb III T0 Db Ex mb d II T/T6 Gb Ex mb e II T/T6 Gb Ex td T00 ) Ex mb d II T/T6 Gb Ex mb e II T/T6 Gb Ex td T00 ), 59 XP/DIP, Div. & l. I, Gr. -D l. II / III, Gr. E-G T (60 ) NEM, X, 6, 6P, 7, 9 Temperature mbient/fluid (kg) Nr. Nr. 0, 7 / able m 0, able m 0, T T6 T T6 T T6 T T6 T T6 T T T T T T Flying leads 50 mm M0 X,5 *6) 0, M0 X,5 *6) 0, / NPT *6) 0, M0 X,5 *6) 7 60 / NPT *6) 0, M0 X,5 *6) 0, M0 X,5 *6), 0 80 M0 X,5 *6), , 8 70 Standard voltages (±0%) V d.c., 0 V a.c., other voltages on request. Design according to VDE 0580, EN 500/ % duty cycle. *5) Required connector: type for d.c. and 0660 for a.c. *6) onnector cable gland not supplied, see table»ccessories«ttention: The protection class for coil series 6xx and 8xx is determined by the choice of cable gland. Example: if an TEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex d mb; if a cable gland with Ex e type of proteciton is used, the solenoid will have protection class Ex e mb. pprovals Model pprovals Datasheet TEX IEEx FM 09x KEM 0 TEX 7 X N/en x, 8x S-LR N/en xx KEM 98 TEX 5 X IEEx KEM X N/en xx PTB 0 TEX 085 X IEEx PTB.009X N/en xx PTB 06 TEX 05 X IEEx PTB X N/en ( ) Electrical connection Weight Dimension ircuit diagram Model 0/ d N/en without notice, the specifications given in this document. 0 Norgren GmbH

4 9805 NMUR/INLINE Solenoid actuators for intrinsically-safe circuits Ex ia II T , Ex ia II T 0, Ex iad T , Ex iad T00 0, able gland is included in delivery When selecting an intrinsically safe power supply, the permissible maximum values according to the ertificate of onformity should be taken into account. Ui = 5 V, Ii = 500 m according to Tab.., EN Pi =,0 W, Li and i can be ignored. pprovals Nominal resistance RN coil (Ω) Min. required switching current (m) Resistance Rw 60 coil Model pprovals Datasheet TEX IEEx FM 05x PTB 07 TEX 09 IEEx PTB N/en (Ω) Required voltage at terminal Rw 60 (V) IP-Protection class (to EN 6059) Ex-Protection (TEX-ategory) Temperature mbient/fluid ( ) Weight (kg) Dimension No. ircuit diagram No. Model Low-power pilot system in protection class Ex ia II T/T6 Suitable valves see page only Power P (+0 ) Switch-on voltage U on (+0 ) Switch-on voltage U on (+80 ) Switch-off voltage U off (+0 ) Switch-off voltage U off (-5 ) Rated current I on Resistance coil R (+0 ) IP-Protection class (to EN 6059) Ex-Protection (TEX-ategory) 6, mw, V 5, V, V, V,5 m 800 Ω Ex ia II T IP 65 (with cable gland), mw 6 V 6,8 V 5, V,7 V,5 m 0900 Ω Ex ia II T6 IP 65 (with cable gland) Temperature mbient ircuit diagram No. Model Max. values Ex i Ui (V) Ii (m) Pi *5) (mw) ir consumption: home position 60 l/h, operating position 5 l/h *5) Model 086 without Pi limiting. i and Li can be ignored. Ordering example Valve Pilot 6, mw Electrical connection 00 internal air supply pprovals 005 M6 x,5 cable gland 0Z external air supply Model pprovals Datasheet TEX IEEx FM 08x PTB 06 TEX 00U N/en N/en without notice, the specifications given in this document. 0 Norgren GmbH d 0/

5 9805 NMUR/INLINE ccessories able gland Protection class Ex e, Ex d (TEX), Nickel plated brass/stainless steel onnector Page Thread able Ø Material Protection class (TEX) Model M 0x,5 5,0...8,0 mm Nickel plated brass IIGD Ex e M 0x, mm Nickel plated brass IIGD Ex d /--NPT 7,5...,9 mm Nickel plated brass IIGD Ex d M 0x,5 9,0... mm Stainless steel.57 (6 Ti) IIGD Ex e M 0x,5 7,0... mm Stainless steel.0 (6 L) IIGD Ex d M 0x, mm Stainless steel.0 (6 L) IIGD Ex d (with rectifier) Inlet filter Silencer *) Exhaust guard *) Manual override Manual override (for start-up only) Page Page Page 0687 M/S (G/) 06 (G/, / NPT) (without detent) 0679 (without detent) /S (/ NPT) 06 (G/, / NPT) (with detent) M/S (G/) /S (/ NPT) *) For indoors use only *) For outdoors use, opening pressure ~ 0, bar Throttle control plate Flange plate, for G/ only Yoke Distance plate for coils Mounting plate 90 and 70 Page Page Page Page Page 009 (only for G/) (NMUR single connection plate (90 ) 0679 (NMUR-rip use in combination with (70 ) 0/ d N/en without notice, the specifications given in this document. 0 Norgren GmbH

6 9805 NMUR/INLINE Dimensions Valves - G/ ca G / G /8 M G/ ,5 5, Solenoid optional turnable Port G/ or / NPT 9,5 55 8,5 5 6,5 External control pressure connection G/8 or /8 NPT Electrical connection selectable version Position of gasket internal pilot air 0 Position of gasket external pilot air N/en without notice, the specifications given in this document. 0 Norgren GmbH d 0/

7 9805 NMUR/INLINE P int. P ext. 9 G/ 56,8 8 (ca. 55) G/ G/,6 6 6 G/8 G/ 9 7 5,5 M5 0 (5) 50, ,5 (ca. 6,5) 7 5,5 86 0,5 Solenoid optional turnable Port G/ or / NPT 9,5 55 8,5 5 6,5 9,5 External control pressure connection G/8 or /8 NPT Electrical connection selectable version Position of gasket internal pilot air Position of gasket external pilot air Electrical connection / d N/en without notice, the specifications given in this document. 0 Norgren GmbH

8 9805 NMUR/INLINE ~5 7 0,5 G/ ,5 9,5 9,5 G/8 M G/ 5 7,5 50 G/ ~5 7 0,5 G/ ,5 9,5 9,5 G/8 M G/ 5 7, Solenoid optional turnable Port G/ or / NPT External control pressure connection G/8 or /8 NPT Exhaust guard G /, or / NPT 9 Position of gasket internal pilot air 0 Position of gasket external pilot air N/en without notice, the specifications given in this document. 0 Norgren GmbH d 0/

9 9805 NMUR/INLINE Dimensions Solenoid operators 86,5 5 5, ,5 8,5 89 M6 x,5 8 9,5 7 6, ,5 9,5 6,5 7 5,5 0,5 0 5,5 M 0 x, / - NPT 0,5 8 6 onnector can be indexed by x90 Ø 6 or (with spacer tube) M0 x,5 or / - NPT,5 Flying leads WG 8 (50 mm long) 6 0/ d N/en without notice, the specifications given in this document. 0 Norgren GmbH

10 9805 NMUR/INLINE Ø 6 or (with spacer tube) M0 x,5 ircuit diagrams N/en without notice, the specifications given in this document. 0 Norgren GmbH d 0/

11 9805 NMUR/INLINE NMUR hole pattern (driving side) Port G/ M5 Port () oding stud threaded M5 (0 deep) 5 Port (R) NMUR quick exhaust module for a better kv-value by exhaust see data sheet NMUR interlinking plates in redundancy design for»safety exhausting«and»safety ventilating«see data sheet Single connection plate Type: NMUR slot (in connection with only) Model: ,5 M 5 (x),5 0 ø 9, , G / 9, ,5 5,5 9 5,5 ø 5,5 G / 5 60 Yoke Model: ø 9 ø,5 7 Throttle control plate Model: 009 9,5 5,5 x M ,5 M 5 5,5 B B 5,5 0/ d N/en without notice, the specifications given in this document. 0 Norgren GmbH

12 9805 NMUR/INLINE 90 Mounting plate Model: Mounting plate Model: Distance plate Model: ,5 5, M5 M M , Manual override Model: Model: Model: ,5 M0 x 0,5 ~ M0 x 0,5 M0 x 0,5 ~ 7 77 N/en without notice, the specifications given in this document. 0 Norgren GmbH d 0/

13 9805 NMUR/INLINE Silencer Model: M/S, /S Exhaust guard Model: 06, 06 77,5 G ø / Inlet filter Model: G/ G/ ø D B B Suitable for G Ø D Weight (g) Model / G/, / NPT 0 6, / G/, / NPT,5 9 06,5 8,5 8,5 able gland B D B only D B ø D Model M0 x, M0 x,5 6,5 7, M0 x, /- NPT ,5..., M0 x, M0 x, Warning These products are intended for use in industrial compressed air and fluid systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in pneumatic systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. Functional safety (SIL): Suitable for certain applications can only be evaluated through examination of each safety-related overall system with regard to the requirements of IE 6508/65. 0/ d N/en without notice, the specifications given in this document. 0 Norgren GmbH