P64F - Olympian Plus plug-in system Soft start/dump valves

Transcription

1 > Port size: /4... /4 (ISO G/PTF) > Solenoid, air pilot or manual operator > ssists machine designers in complying with the European Machineries Directive > High forward flow and capacity dump facility > Controlled increase of downstream pressure on start up Technical features Medium: Compressed air only Operating pressure: bar (4 psi) minimum 0 bar (45 psi) (Solenoid operated) 7 bar (4 psi) (Pilot operated) Snap pressure: Full flow when downstream pressure reaches % of inlet pressure Charge time: For litre downstream volume and, bar (90 psi) inlet pressure 0, sec. minimum 75 sec. maximum Flow: 57 dm /s Operating pressure:, bar (9 psi) Δp: 0,5 bar (7 psi) Port sizes: /4, /, / or /4 ir pilot port: /4 PTF with PTF main ports Rc/4 with ISO G main ports Exhaust port: / PTF with PTF main ports G/ with ISO G main ports Gauge port: / PTF with PTF main ports Rc/ with ISO G main ports mbient/media temperature: Solenoid actuated: C ( F) Pilot actuated: C ( F) Version with gauge: C ( F) ir supply must be dry enough to avoid ice formation at temperatures below + C (+5 F). Materials: Body & yoke: Zinc alloy Intermediate body: luminium Top plate: Zinc Elastomers: BR Electrical details for solenoid operators Voltage tolerance ± 0% Rating Inlet orifice Electrical connection Technical data - standard models Symbol Port size Size ctuation/ return 00% continuous duty,0 mm Industrial Standard, mm Solenoid coil mounting Four positions x 90 Protection class Voltage Pilot port Weight (kg) G/4 Solenoid/spring 4 V d.c.,07 P4F-GC-PF *) G/ Solenoid/spring 4 V d.c.,05 P4F-GC-PF *) G/ Basic Solenoid/spring 4 V d.c.,0 P4F-4GC-PF *) G/4 Solenoid/spring 4 V d.c., P4F-GC-PF *) Without yoke Solenoid/spring 4 V d.c.,59 P4F-C-PF *) G/4 ir/spring Rc/4,9 P4F-G- G/ ir/spring Rc/4,94 P4F-G- G/ Basic ir/spring Rc/4,9 P4F-4G- G/4 ir/spring Rc/4,7 P4F-G- Without yoke ir/spring Rc/4,45 P4F-- *) To select other solenoid type and coil voltage refer to option selector on page Voltage codes and spare coils IP 5 (with sealed plug) mm coil for connector interface acc. to industrial standard Voltage Power Inrush/Hold Model Code V d.c. W QM/4/J/ J 4 V d.c W QM/4/J/ J 0/0 V 50/0 Hz 4/,5 V QM/4/J/ J 0/40 V 50/0 Hz /5,0 V QM/4/9J/ 9J Connector plugs Industrial standard mm -pole + PE Typ 057 without notice, the specifications given in this document. (00-0f) 05 IMI International s.r.o. en

2 Option selector Port size /4 / / 4 /4 o yoke Threads PTF ISO G parallel (standard) o yoke (standard) Operator ir pilot (standard) ir pilot with manual lockout G mm solenoid (standard) C mm solenoid with manual lockout B D P4F- - Connector With Without Voltage Watts 4 V d.c. W F V d.c. W E V d.c. W D 0/40 V, 50/0 Hz 4/,5 V B 0/0 V, 50/0 Hz 4/,5 V o coil Z o solenoid Solenoid manual operator on-locking, P shrouded push button one Flow characteristics Pressure drop Δ p psi bar 0, 0,4 0, Inlet pressure bar (psi) 4,0 (44) (5), (9) () 0 (50) dm /s scfm ir flow Maximum charge time Outlet pressure psi liter volume Snap Point bar s Charge time en without notice, the specifications given in this document. (00-0f) 05 IMI International s.r.o.

3 ccessories Models with G-thread Single yoke Double yoke / Shut-off valve Threaded inlet only Threaded outlet only End connector kit Rear entry bracket kit Thread G/4 Y4-G- Y4-G- T4T-GB-P T4T-GC-P G/ Y4-G- Y4-G- T4T-GB-P T4T-GC-P G/ Y4-4G- Y4-4G- T4T-4GB-P T4T-4GC-P G/4 Y4-G-* Y4-G-* T4T-GB-P T4T-GC-P /4 PTF Y4-- Y4-- T4T-B-P T4T-C-P / PTF Y4-- Y4-- T4T-B-P T4T-C-P / PTF Y4-4- Y4-4- T4T-4B-P T4T-4C-P /4 PTF Y4--* Y4--* T4T-B-P T4T-C-P *These yokes are supplied with two end connenctor kits as standard. Bracket mounting ut Silencer Yoke connector kit Porting block djustable pressure switch Padlock with two keys MB004B (R/) (brass) MB004 (/ PT) Gauges Center back connection, white face (full technical specification see datasheet ) Pressure range bar * MPa psi Ø Thread size Model mm R/ , mm R/ *) primary scale Center back connection, black face for orth merica (full technical specification see datasheet ) Pressure range psig * bar MPa Ø Thread size Model (50 mm) / PT (50 mm) / PT -0-0 *) primary scale without notice, the specifications given in this document. (00-0f) 05 IMI International s.r.o. en

4 Dimensions Pilot actuated Standard With manual lockout Dimensions in mm Projection/First angle 4 # or / 7 # ø 5 5 Solenoid actuated Standard With manual lockout 95 # or / 7 Pg # 5 # Minimum clearance required to remove unit from yoke Main ports /4, /, / or /4 5 ø Pilot port Rc/4 For main ports /4 only Exhaust port / 7 Gauge port / en without notice, the specifications given in this document. (00-0f) 05 IMI International s.r.o.

5 Single yoke with bracket mounting 4 4 Double yoke with bracket mounting 94 Dimensions in mm Projection/First angle 5 0 9, 0,5, 4,5, , 0,5 4, Rear entry bracket -0-9 Porting block , 9,5 G /4 50,5 59 ø G/ 0,5 +0, 7,5 54, ,5 4,5,5 G/4 - O -ring (included in scope of supply of bracket) djustable pressure switch Pg 7 Voltage Current Pressure range 4 V d.c./40 V a.c. 0,5 (d.c.); 5 (a.c.)... 0 bar Repeatabillity % of full set point range at 0 C 7 verage deadband Electrical connection (corresponding to choosen coil) 0,...,7 bar E Form C, 5 mm 4 5 Degee of protection: djustable Material IP5 Standard Body: luminium, Elastomers: BR 59 ø 4 djusting screw / Shut-off valve Symbol B ø C Model 7 B G/4 4 7 T4T-G*-P G/ 4 7 T4T-G*-P 7 OPE G/ 4 7 T4T-4G*-P G/4 5 T4T-G*-P ø C * B = Threaded inlet only, C = Threaded outlet only Rc /,5 7 7,5 7 Padlock hole ø7,5 mm without notice, the specifications given in this document. (00-0f) 05 IMI International s.r.o. en

6 Silencer C Dimensions in mm Projection/First angle Ø D B B C D Model R/ 7 9 MB004B / PT 7 9 MB004 Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI Precision Engineering, orgren GmbH. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. en without notice, the specifications given in this document. (00-0f) 05 IMI International s.r.o.