High pressure valves. 80 to 350 bar

Transcription

1 80 to 350 bar High switchable p Hermetically sealed poppet valves Excellent repeatability of switching times Function even with lager voltage tolerance Compact design DN to DN 40 Technical data Medium: For neutral gaseous and liquid fluids, Natural gas to specification DVGW G60/ *) Operation: Solenoid direct and indirectly operated poppet valves Indirectly with forced lifting Mounting position: Optional, preferably with solenoid on top Flow direction: Fixed Port size: G /8 to G / Operating pressure: 80 to 350 bar Ambient temperature: Depending on solenoid system see Page and 3 Fluid temperature: -0* to +60 C AU (Polyurethan) -40* to +80 C POM (Delrin) -40* to +0 C PVDF/PI *Please contact our technical service for use below + C. Materials: Housing: brass, stainless steel.4305,.430 Sealing: see fluid temperature Inner parts: brass, stainless steel.4305,.405,.430 Ordering example See page Further versions Solenoid systems for high temperatures Block design Variants on request *) With contaminated fluids, upstream installation of a dirt trap is recommended. /06 Our policy is one of continued research and development. We therefore reserve the right N/UK

2 General information Symbol Port size Nominal size Operating pressure(bar) min. max. gaseous liquid to 5 mm /s kv value (Cv(US) kv x,) Material Housing *) G /4, ,068 Ms AU 0, *) G / , POM 0, *) G /4, , PI, *) G /4, , PI, *) G / ,035 Ms AU 0,55 Seat seal Weight (kg) Dimensions No. *) Suitable for DC only *) Not suitable for water G / ,57 Ms POM 0, G / ,57 Ms POM 0, G / 0 80,44 Ms POM 0, G / 0 80,44 Ms POM 0, G / 0 30, PVDF 0, G / 0 30, PVDF 0, G / 0 70, PVDF 0, G / 0 70, PVDF 0, G / ,57 Ms POM 0, G / ,57 Ms POM 0, G / ,44 Ms POM 0, G / ,44 Ms POM 0,76 6 Solenoid actuators Power consumption 4V DC 30V AC Rated current 4 V DC 30 V AC Protection class Temperature range Ambient/fluid Electr. port Weight (kg) (W) (VA) (ma) (ma) C No ,9 7, IP DIN EN ,7 Form A ,9 7, IP DIN EN ,6 Form A IP DIN EN ,40 Form A Circuit diagram 00 0, 38, IP PG,0 Ordering example /-way valve, brass, port size G /4, Solenoid 4 V DC, protection class IP65 : Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under Technical Data. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. N/UK Our policy is one of continued research and development. We therefore reserve the right /06

3 The following models are also suitable for natural gas applications/cng Symbol Port Nominal Operating pressure (bar) kv value Material Weight Dimensions size size min. max. liquid to (Cv(US) Housing Seat (kg) No. gaseous 5 mm /s kv x,) seal G / ,5.430 PTFE, *3) G / ,6.430 POM, *3) Cartridge ,6 - POM, *3) Cartridge ,0 - POM, *3) Cartridge ,9 - POM, *3) G / ,0 Al POM, *3) G / Flange ,0.430 POM *3) G / Flange ,0.430 POM 30 *3) please inserrt solenoid code and voltage each Solenoid actuators Power consumption Rated current Protection Temperature range Electr. port Weight Dimensions Circuit 4V DC 30V AC 4 V DC 30 V AC class Ambient/Fluid (kg) No. diagram (W) (VA) (ma) (ma) C No IP DIN EN , VA/ W - 07 IP DIN EN , EEx me II T ,85 & 6 IP /44,8 *3) - 08/870 *3) IP69 K with Connection acc. to 0,7 0 connector DIN Ag/K (Bayonet) *3) Holding power/pull power Accessories Connectors (with rectifier) /06 Our policy is one of continued research and development. We therefore reserve the right N/UK

4 Basic dimensions ➀ 7 ➁ 7 ➂ 75 9, ,5,8 G/4 9 9,5,8 G/4 30 G / x 30 4 G /4 M , ➃ ➄ ➅ 43 8 ø ø 6, , G/ 9 G/ M5 x 8 deep 3 4 Electr. port M0 x,5 M5 x 6 deep N/UK Our policy is one of continued research and development. We therefore reserve the right /06

5 ➆ ➇ 7 07,5 Pin + Connection acc. to 30 6 DIN Ag/K 0 30, Pin 4 - M6 x 6 deep Port 4 deep G/ ,5 4 4 ø 8,8 G/ ,5 4 6,5 7,5 48 ~50 ➈ ➉ ~8 G / G / 40 8 ø 8,-0, Rz 8 ~78 ø 7 +0, M6 x,5 R 0,4 30 0,03 A 3 A 3 D L øa R 0,4 R 0,6 R 0,6 30 B 0 C 3 +0, 80 ø ø 0 ø0 Rz 8 0,03 A M6 x,5 ø H8 0,03 A M6 x 8 deep A B C D L , ,5,5 8 /06 Our policy is one of continued research and development. We therefore reserve the right N/UK

6 60±0, G/ M8 ~ ,5 +6 8, G/ 0 N/UK Our policy is one of continued research and development. We therefore reserve the right /06

7 A - A 55 8 x 45 =360 A 45 L M ø 3 H3 D D ø 68±0,,5 +0,3 5 0 A D L3 A ø D3 L4 L5, ØD G G / ØD 68 ±0, 90 ±0, ØD L 0,5 57,5 L L3 55,5 7,5 L ,5 L5 88 7,5 F Flange screws 6 x M x 35 6 x M x 40 Flange Ordering no Blank flanges (please order separately) /06 Our policy is one of continued research and development. We therefore reserve the right N/UK

8 Basic dimensions for solenoids Circuit diagram ➀ ➁ ➅ ➉ + ES - 4 N/UK Our policy is one of continued research and development. We therefore reserve the right /06