% ^ ) 4/2 SERIES. Direct Mount. Direct Acting Direct Mount Pilot Valves. Brass or Stainless Steel Bodies 1/4" NPT. Features. Construction.

Size: px

Start display at page:

Download "% ^ ) 4/2 SERIES. Direct Mount. Direct Acting Direct Mount Pilot Valves. Brass or Stainless Steel Bodies 1/4" NPT. Features. Construction."

Alfred McCormick
5 years ago
Views:

Direct Acting Direct Mount Pilot Valves Brass or Stainless Steel Bodies /" NPT / 83 Direct Mount Features NAMUR direct mount version of the rugged, dependable 83 Series valves Direct acting, high

1 Direct Acting Direct Mount Pilot Valves Brass or Stainless Steel Bodies /" NPT / 83 Direct Mount Features NAMUR direct mount version of the rugged, dependable 83 Series valves Direct acting, high flow slide-style valve No Minimum Operating Pressure Differential required to shift valve Available with single or dual solenoid operation Mechanical detent on dual solenoids holds last position, even after loss of electric power, pneumatics, or pressure % ^ ) Construction Solenoid Enclosures Valve Parts in Contact with Fluids Body Brass 303 Stainless Steel Seals and Discs Core Tube Core and Plugnut Springs Shading Coil Sleeve Seats Electrical Standard Coil and Class of NBR and FKM 305 Stainless Steel 30F Stainless Steel 30 Stainless Steel Copper Standard: Watertight, Types,, 3, 3S,, and X. Optional: Explosionproof and Watertight, Types 3, 3S,, X, 6, 6P, 7, and 9. (To order, add prefix EF to catalog number.) See Optional Features Section for other available options. PA PTFE Watt Rating and Power Consumption Spare Coil Part Number General Purpose Explosionproof Watts VA Holding VA Inrush F F Standard Voltages:, 0, 0, 80 volts, 60 Hz (or 0, 0 volts, 50 Hz). Must be specified when ordering. Other voltages, except combinations 0/60 and 0/50, are available when required. Nominal Ambient Temp. Ranges 3 F to 5 F (0 C to 5 C) Approvals General Purpose Solenoid: UL recognized component, CSA certified. Explosionproof Solenoid: (EF Brass, EV S.S) UL listed solenoid. CSA certified for use in hazardous Locations. Meets applicable CE directives. E B A P 93 VALVE AUTOMATION

2 / 83 Direct Mount Specifications (English units) Cv Flow Cv Flow Maximum Maximum Fluid Brass Body Stainless Steel Body Factor Factor Operating Pressure Temperature Ports - Ports -3 Differential (psi) Range F Catalog Number Catalog Number Ref. SINGLE SOLENOID / 3/ G50 83G5 0./F DUAL SOLENOID / 3/ G50 83G5 6./F Specifications (Metric units) Kv Flow Kv Flow Factor Factor Maximum Maximum Fluid Brass Body Stainless Steel Body Ports - Ports -3 Operating Pressure Temperature (mm) (m3/h) (m3/h) Differential (bar) Range C Catalog Number Catalog Number Ref. SINGLE SOLENOID / G50 83G5 0./F DUAL SOLENOID / G50 83G5 6./F Dimensions inches (mm) VALVE AUTOMATION Ref. Ref. 9

Pilot Operated Piston/Poppet Solenoid Valves Brass Body /" to " NPT / 83 Features Sturdy, robust construction Piston-operated poppet design provides high flow For use with air or water Wide range of

-WAY Construction Valve Parts in Contact with Fluids Body Brass Seals and Disc NBR Core Tube 305 Stainless Steel Core and Plugnut 30F Stainless Steel Springs 30 Stainless Steel / 7-7PH Stainless

3 Pilot Operated Piston/Poppet Solenoid Valves Brass Body /" to " NPT / 83 Features Sturdy, robust construction Piston-operated poppet design provides high flow For use with air or water Wide range of sizes and flow rates Single or dual solenoid constructions Dual solenoid can be shifted with a momentary signal and remain in position even if electrical power is lost Mountable in any position % ) -WAY Construction Valve Parts in Contact with Fluids Body Brass Seals and Disc NBR Core Tube 305 Stainless Steel Core and Plugnut 30F Stainless Steel Springs 30 Stainless Steel / 7-7PH Stainless Steel Shading Coil Copper Pilot Seat Cartridge and Disc-Holder CA Shaft Gasket PA B E B E A P A P Electrical Standard Coil and Class of Watt Rating and Power Consumption Spare Coil Part Number General Purpose Explosionproof DC Watts Watts VA Holding VA Inrush DC DC F F F Dual Solenoid Operation: Minimum coil on-time for dual solenoid valves is 0.3 seconds on air service and.0 seconds on liquids. Caution: Do not energize both solenoids simultaneously. Standard Voltages:, 0, 0, 80 volts, 60 Hz (or 0, 0 volts, 50 Hz). 6,,, 0, 0 volts DC. Must be specified when ordering. Other voltages are available when required. Solenoid Enclosures Standard: Watertight, Types,, 3, 3S,, and X. Optional: Explosionproof and Watertight, Types 3, 3S,, X, 6, 6P, 7, and 9. (To order, add prefix EF to the catalog number.) See Optional Features Section for other available options. Nominal Ambient Temp. Ranges : 3 F to 5 F (0 C to 5 C) DC: 3 F to 0 F (0 C to 0 C) Approvals CSA certified. Meets applicable CE directives. Important A Minimum Operating Pressure Differential must be maintained between the pressure and exhaust ports. Supply and exhaust piping must be full area, unrestricted. ASCO flow controls and other similar components must be installed in the cylinder lines only. Loss of air pressure may allow valve to shift on dual solenoid constructions. 77

4 / 83 Specifications (English units) -WAY Cv Flow Factor ➀ Min. Air-Inert Gas Operating Pressure Differential (psi) Lt. 300 SSU Air-Inert Gas DC Fluid Temp. F Lt. 300 SSU DC Brass Body Catalog Number Ref. DC Press. Exh. Water Water SINGLE SOLENOID / / G070 0./F.6/F / / ➁ 50 ➁ 50 ➁ 50 ➁ 50 ➁ 50 ➁ G000 7./F.6/F 3/8 3/ G07 0./F.6/F 3/8 / ➁ 50 ➁ 50 ➁ 50 ➁ 50 ➁ 50 ➁ G00 7./F.6/F / 3/ G07 0./F.6/F / 3/ ➁ 50 ➁ 50 ➁ 50 ➁ 50 ➁ 50 ➁ G07 7./F.6/F 3/ 3/ G /F.6/F 3/ 3/ ➁ 50 ➁ 50 ➁ 50 ➁ 50 ➁ 50 ➁ G /F.6/F 3/ G /F.6/F 3/ ➁ 50 ➁ 50 ➁ 50 ➁ 50 ➁ 50 ➁ G /F.6/F DUAL SOLENOID ➂ / / G0 6./F 0.6/F 3/8 3/ G /F 0.6/F 3/8 3/ G /F - / 3/ G /F 0.6/F 3/ 3/ G /F 0.6/F 3/ G /F 0.6/F ➀ 5 psi (.7 bar) minimum on light oil service. ➁ For best results, do not use valve rated 50 psi (7 bar) on mainline pressure of less than 5 psi (9 bar). ➂ On 50 hertz service, the watt rating for the 6./F solenoid is 8. watts. Specifications (Metric units) Kv Flow Factor (m3/h) Operating Pressure Differential (bar) Fluid Temp. C Lt. 300 SSU DC Ref. DC DC Brass Body (mm) Press. Exh. ➀ Min. Air-Inert Gas Water Lt. 300 SSU Air-Inert Gas Water Catalog Number SINGLE SOLENOID / G070 0./F.6/F / ➁ 7 ➁ 7 ➁ 7 ➁ 7 ➁ 7 ➁ G000 7./F.6/F 3/ G07 0./F.6/F 3/ ➁ 7 ➁ 7 ➁ 7 ➁ 7 ➁ 7 ➁ G00 7./F.6/F / G07 0./F.6/F / ➁ 7 ➁ 7 ➁ 7 ➁ 7 ➁ 7 ➁ G07 7./F.6/F 3/ G /F.6/F 3/ ➁ 7 ➁ 7 ➁ 7 ➁ 7 ➁ 7 ➁ G /F.6/F G /F.6/F ➁ 7 ➁ 7 ➁ 7 ➁ 7 ➁ 7 ➁ G /F.6/F DUAL SOLENOID ➂ / G0 6./F 0.6/F 3/ G /F 0.6/F 3/ G /F - / G /F 0.6/F 3/ G /F 0.6/F G /F 0.6/F ➀ 5 psi (.7 bar) minimum on light oil service. ➁ For best results, do not use valve rated 50 psi (7 bar) on mainline pressure of less than 5 psi (9 bar). ➂ On 50 hertz service, the watt rating for the 6./F solenoid is 8. watts. 78

5 / 83 Dimensions inches (mm) Ref. ØD E F G H J K L N P W X Y Z Exhaust ins. Ø /8 mm Ø /8 ins. Ø / mm Ø / 3 ins. Ø mm Ø ins. Ø /8 mm Ø /8 6 ins. Ø / mm Ø / 7 ins. Ø / mm Ø / 8 ins. Ø mm Ø WAY Ref - 3 / NPT P H K PRESS EXH. N X E PRESS EXH. MTG. HOLES DIA D L F CYL B Z J G CYL A Y W 79

6 / 83 Dimensions inches (mm) Ref WAY / NPT K P H PRESS EXH. N X E PRESS EXH. MTG. HOLES DIA D L F CYL B Z G J CYL A Y W 80

Pilot Operated General Service Solenoid Valves Brass and 36 Stainless Steel Bodies /" NPT / 835 Features Compact valves for general service applications Low-cost, -way valve when low flow is

7 Pilot Operated General Service Solenoid Valves Brass and 36 Stainless Steel Bodies /" NPT / 835 Features Compact valves for general service applications Low-cost, -way valve when low flow is sufficient Mountable in any position % ^ ) Construction Valve Parts in Contact with Fluids Body Brass 36 Stainless Steel Seals and Disc NBR and PA FKM, PA and UR Core Tube 305 Stainless Steel Core and Plugnut 30F Stainless Steel Springs 30 Stainless Steel Shading Coil Copper Silver Piston PA -WAY B A Electrical Watt Rating and Power Consumption Spare Coil Part Number Standard General Explosionproof Explosionproof Coil and Purpose (EF) (EV) Class of DC VA VA Watts Watts Holding Inrush DC DC DC F Standard Voltages:, 0, 0, 80 volts, 60 Hz (or 0, 0 volts, 50 Hz). 6,,, 0, 0 volts DC. Must be specified when ordering. Other voltages are available when required. EB P EA Solenoid Enclosures Standard: Watertight, Types,, 3, 3S,, and X. Optional: Explosionproof and Watertight, Types 3, 3S,, X, 6, 6P, 7, and 9. (To order, add prefix EF or, for Explosionproof Stainless Steel trim and hub on Brass-Bodied valves, add EV to catalog number.) See Optional Features Section for other available options. 835R Nominal Ambient Temp. Ranges : 3 F to 5 F (0 C to 5 C) DC: 3 F to 0 F (0 C to 0 C) Approvals CSA certified. UL listed as General Purpose Valve. EV835G08 solenoid only UL approved. Meets applicable CE directives. Important A Minimum Operating Pressure Differential must be maintained between the pressure and exhaust ports. Supply and exhaust piping must be full area, unrestricted. ASCO flow controls and other similar components must be installed in the cylinder lines only. 8

8 / 835 Specifications (English units) -WAY Cv Flow Factor Press. Exh. Inlet Exh. Min. SINGLE SOLENOID Air-Inert Gas Operating Pressure Differential (psi) Water Lt. 50 SSU Air-Inert Gas DC Water Fluid Temp. F Brass Body Stainless Steel Body Lt. 50 SSU DC Catalog Number Catalog Number Ref. DC / /6 3/ G00 EV835G08 0./F.6/F SINGLE SOLENOID AIR-ONLY CONSTRUCTION - Exhaust to Atmosphere / /6 3/ H003-0./F.6/F Specifications (Metric units) (mm) Kv Flow Factor (m3/h) Press. Exh. Inlet Exh. Min. SINGLE SOLENOID Air-Inert Gas Operating Pressure Differential (bar) Water Lt. 50 SSU Air-Inert Gas DC Water Fluid Temp. C Brass Body Stainless Steel Body Lt. 50 SSU DC Catalog Number Catalog Number Ref. DC / G00 EV835G08 0./F.6/F SINGLE SOLENOID AIR-ONLY CONSTRUCTION - Exhaust to Atmosphere / H003-0./F.6/F Dimensions inches (mm) Ref., 8 835R

Pilot Operated Inline Spool Valves Anodized Aluminum Bodies /" and /" NPT 5/ 855 8553 Features Compact spool valve with threaded port connections All exhaust ports are pipable, providing better

9 Pilot Operated Inline Spool Valves Anodized Aluminum Bodies /" and /" NPT 5/ Features Compact spool valve with threaded port connections All exhaust ports are pipable, providing better protection against harsh environments Standard manual operator DIN, Watertight and Explosionproof solenoids available Single and dual solenoid constructions Mountable in any position % ^ ) -WAY Construction Valve Parts in Contact with Fluids Body Black Anodized Aluminum Spring Shading Coil Phosphate Treated Black Steel Copper 5 3 Seals Core and Core Tube NBR + PUR Stainless Steel/Brass 5 3 End Covers 6/6 Glass Filled PA/FG Spool Aluminum Internal Parts Zamak, Steel, CA, Aluminum Electrical Standard Coil and Class of Enclosure Type DC Watts Solenoid Enclosures Watt Rating and Power Consumption Watts VA Holding Spare Coil Part Number VA Inrush DC F SC F SC F EF F WT Standard Voltages: SC:, 0, 0 Volts, Hz;,, 0 Volts DC. WT and EF: /50-60HZ, (0/60, 0-0/50), (0/60, 0-0/50)➁ Volts ; 6,,, 0 Volts DC. Order as 0/60, 0/50 ➁ Order as 0/60, 0/50 Standard: - Prefix SC = IP65 type DIN (open frame) per 6 WT = Combination General Purpose and Watertight Types,, 3, 3S,, and X EF = Combination Explosionproof and Watertight Types 3, 3S,, X, 6, 6P, 7, 9 Class I, Div. (Groups A - D) and Class II, Div. Type 9 (Groups E-G) 855_53_InlineR Nominal Ambient Temp. Ranges SC: /DC: 5 F to +0 F (-5 C to 60 C) EF: : 5 F to +0 F (-5 C to 0 C) DC: 5 F to +77 F (-5 C to 5 C) WT: : 5 F to +0 F (-5 C to 60 C) DC: 5 F to +77 F (-5 C to 5 C) Note: For temperatures below 3 F (0 C) moisture-free air must be used. Approvals SC (.5W and 3W only) UL recognized component, CSA certified. WT: UL recognized component, CSA certified. EF: UL and CSA solenoid apprival. Meets applicable CE directives. Note When mounting inline 855 valves with WT & EF solenoids (6.3 & 6.9 watts), ASCO recommends using two () /8" thick washers under the valve body to provide clearance for the solenoid coil. 87

10 5/ Specifications (English units) -WAY OPEN FRAME DIN COIL Cv Flow Factor Operating Pressure Differential (psi) Fluid Temp. F (for single and dual solenoid) Single Solenoid Dual Solenoid Min. Min. DC Catalog Number Catalog Number DC / / SC855A07MS SC855A08MS.5 3 / / SC8553A07MS SC8553A08MS WATERTIGHT ENCLOSURE / / WT855A07MS WT855A08MS / / WT8553A07MS WT8553A08MS EXPLOSIONPROOF ENCLOSURE / / EF855A07MS EF855A08MS / / EF8553A07MS EF8553A08MS Specifications (Metric units) (mm) OPEN FRAME DIN COIL Kv Flow Factor (m3/h) Operating Pressure Differential (bar) Fluid Temp. C (for single and dual solenoid) Single Solenoid Dual Solenoid Min. Min. DC Catalog Number Catalog Number DC / SC855A07MS SC855A08MS.5 3 / SC8553A07MS SC8553A08MS WATERTIGHT ENCLOSURE / WT855A07MS WT855A08MS / WT8553A07MS WT8553A08MS EXPLOSIONPROOF ENCLOSURE / EF855A07MS EF855A08MS / EF8553A07MS EF8553A08MS Dimensions inches (mm) Series NPT / / L 6.8 (57) 7.76 (97) L 8.8 (0) 0.5 (60) H.0 (8).58 (0) W.77 (5).85 (7) NOTE: Valve shown with CM DIN terminal coil and connector. Connector sold separately. H W 5 3 L L _53_InlineR

Pilot Operated Direct Mount Inline Spool Valves Anodized Aluminum Bodies Direct NAMUR Mount /" and /" NPT 3/ 5/ 855, 8553 Direct Mount Features Compact spool valve convertible from 3/ to 5/ NAMUR

11 Pilot Operated Direct Mount Inline Spool Valves Anodized Aluminum Bodies Direct NAMUR Mount /" and /" NPT 3/ 5/ 855, 8553 Direct Mount Features Compact spool valve convertible from 3/ to 5/ NAMUR mount construction Standard manual operator DIN, Watertight and Explosionproof solenoids available Single and dual solenoid constructions Mountable in any position Vents air from spring side of actuator to prevent corrosion of actuator % ^ ) Construction Body Spring Shading Coil Seals Core and Core Tube End Covers and Plate Spool Internal Parts Electrical Standard Coil and Class of Enclosure Type Valve Parts in Contact with Fluids DC Watts Black Anodized Aluminum Phosphate treated black steel Watt Rating and Power Consumption Watts Copper NBR + PUR Stainless Steel / Brass 6/6 glass filled PA/FV VA Holding Aluminum Zamak, Steel, CA Spare Coil Part Number VA Inrush DC F SC F SC F EF F WT Standard Voltages: SC:, 0, 0 Volts, Hz;,, 0 Volts DC. WT and EF: /50-60HZ, (0/60, 0-0/50), (0/60, 0-0/50)➁ Volts ; 6,,, 0 Volts DC. Order as 0/60, 0/50 ➁ Order as 0/60, 0/50 Solenoid Enclosures Standard: - Prefix SC = IP65 type DIN (open frame) per 6 WT = Combination General Purpose and Watertight Types,, 3, 3S,, and X EF = Combination Explosionproof and Watertight Types 3, 3S,, X, 6, 5P, 7, 9 Class I, Div. (Groups A - D) and Class II, Div. Type 9 (Groups E-G) Nominal Ambient Temp. Ranges SC: /DC: 5 F to +0 F (-5 C to 60 C) 3/ 5/ EF: : 5 F to +0 F (-5 C to 60 C) DC: 5 F to +77 F (-5 C to 5 C) WT: : 5 F to +0 F (-5 C to 60 C) DC: 5 F to +77 F (-5 C to 5 C) Note: For temperatures below 3 F (0 C) moisture-free air must be used. Approvals SC (.5W and 3W only) UL recognized component, CSA certified. WT: UL recognized component, CSA certified. EF: UL and CSA solenoid approval. Meets applicable CE directives VALVE AUTOMATION 855_Inline_DMoR 95

12 3/ 5/ 855, 8553 Direct Mount Specifications (English units) OPEN FRAME DIN COIL Cv Flow Factor Operating Pressure Differential (psi) Min. Min. Fluid Temperature F (for single and dual solenoid) Single Solenoid Dual Solenoid DC Catalog Number Catalog Number Ref. DC / / SC855A00MS SC855A00MS.5 3 / / SC8553A00MS SC8553A00MS WATERTIGHT ENCLOSURE / / WT855A00MS WT855A00MS / / WT8553A00MS WT8553A00MS EXPLOSIONPROOF ENCLOSURE / / EF855A00MS EF855A00MS / / EF8553A00MS EF8553A00MS /8 inch NPT exhausts. Specifications (Metric units) VALVE AUTOMATION (mm) OPEN FRAME DIN COIL Kv Flow Factor (m3/h) Operating Pressure Differential (bar) Min. Min. Fluid Temperature C (for single and dual solenoid) Single Solenoid Dual Solenoid DC Catalog Number Catalog Number Ref. DC / SC855A00MS SC855A00MS.5 3 / SC8553A00MS SC8553A00MS WATERTIGHT ENCLOSURE / WT855A00MS WT855A00MS / WT8553A00MS WT8553A00MS EXPLOSIONPROOF ENCLOSURE / EF855A00MS EF855A00MS / EF8553A00MS EF8553A00MS /8 inch NPT exhausts _Inline_DMoR

13 3/ 5/ 855, 8553 Direct Mount Dimensions inches (mm) Series 855 NPT / L 5.7 (39) L 7.56 (9) H.30 (33) W.77 (5) NOTE: Valve shown with CM DIN terminal coil and connector. Connector sold separately. H Ref. /8 NPT / NPT 3 W L 855 NAMUR Footprint L.6 (3).95 () Series 8553 NPT / L 7.76 (97) L 0.5 (60) H.9 (9) W.85 (7) H Ref. / NPT 5 3 VALVE AUTOMATION NOTE: Valve shown with CM DIN terminal coil and connector. Connector sold separately. W L L 8553 NAMUR Footprint.77 (5).57 (0) 855_Inline_DMoR 97

14 VALVE AUTOMATION _Inline_DMoR

Pilot Operated High Flow Direct Mount RedHat II Spool Valves Anodized Aluminum, Brass and Stainless Steel Bodies /" and /" NPT 3/ 5/ 5/3 855, 8553 Direct Mount Features Compact Spool Valve

15 Pilot Operated High Flow Direct Mount RedHat II Spool Valves Anodized Aluminum, Brass and Stainless Steel Bodies /" and /" NPT 3/ 5/ 5/3 855, 8553 Direct Mount Features Compact Spool Valve convertible from 3/ to 5/ with flow plates % ^ ) Mount directly to actuators with NAMUR interface per VDI/VDE 385 Single and dual solenoid constructions available Integral Breather Block vents to spring side of actuator to exhaust, preventing corrosion of the actuator Unique design combines hard T-seals and flexible o-rings, provides bubble-tight shutoff, resistance to dirt and multimillion cycle life controlling air or inert gas Low Power and Intrinsically Safe construction available See Special Service Pilot Valve Section for details Construction Valve Parts in Contact with Fluids Body Aluminum, Black Anodized Brass 36L Stainless Steel End Cover (Spring end) Glass-filled Polyamide Brass 36L Stainless Steel Spool Valve Internals Zamak, Stainless Steel, Acetal (POM), Aluminum Brass, Acetal (POM), Delrin Pilot End Covers Aluminum, Black Anodized Brass 36L Stainless Steel Core Tube Stainless Steel Core and Plugnut Stainless Steel Springs Stainless Steel Seals and Discs NBR Top Disc Nylon (PA) Core Guide Acetal Seat and Seat Insert Brass, Acetal Shading Coil Copper Rider Ring (low power) PTFE 3/ 5/ / VALVE AUTOMATION Electrical Standard Coil and Class of Watt Rating and Power Consumption Spare Coil Part Number General Purpose Explosionproof DC Watts Watts VA Holding VA Inrush DC DC F Standard Voltages:, 0, 0, 80 volts, 60 Hz (0, 0 volts, 50 Hz). 6,,, 0, 0 volts DC. Must be specified when ordering. Other voltages are available when required. Solenoid Enclosures Standard: Watertight, Types,, 3, 3S,, and X. Optional: Explosionproof and Watertight, Types 3, 3S,, X, 6, 6P, 7, and 9. (To order, add prefix EF or ( EV for stainless steel) to catalog number.) See Optional Features Section for other available options. 855_RHII_DMoR Nominal Ambient Temp. Ranges Body Material Aluminum Brass Stainless Steel Description : 5 F to 5 F (-5 C to 5 C) DC: 5 F to 0 F (-5 C to 0 C) : -0 F to 5 F (-0 C to 5 C) DC: -0 F to 0 F (-0 C to 0 C) Approvals UL/CSA approvals for aluminum constructions pending. EF and EV are UL listed solenoids. CSA certified. Meet applicable CE directives. 99

16 3/ 5/ 5/3 855, 8553 Direct Mount Specifications (English units) Body Material Aluminum 3/, 5/ Cv Flow Factor Single Solenoid Dual Solenoid Operating Pressure Operating Pressure Differential (psi) Fluid Differential (psi) Fluid Air-Inert Gas Temp. F Air-Inert Gas Temp. F Min. DC DC Catalog Number Ref. Min. DC DC Catalog Number Ref. DC 855G0 855G0 Aluminum 5/3 Center Closed - 855G65 Aluminum 5/3 Center Open / ➀ / G Brass 3/, 5/ EF855G03 ➁ EF855G0 ➁ 36L Stainless Steel 3/, 5/ EV855G09 ➂ EV855G0 ➂ Aluminum 3/, 5/ / / G0 8553G0 0./F.6/F /8 inch NPT exhaust for aluminum and brass. ➁ Brass construction supplied standard with EF solenoid. ➂ Stainless steel construction supplied standard with EV solenoid. VALVE AUTOMATION Specifications (Metric units) Body Material Aluminum 3/, 5/ (mm) Kv Flow Factor (m3/h) Single Solenoid Dual Solenoid Operating Pressure Operating Pressure Differential (bar) Fluid Differential (bar) Fluid Air-Inert Gas Temp. C Air-Inert Gas Temp. C Min. DC DC Catalog Number Ref. Min. DC DC Catalog Number Ref. DC 855G0 855G0 Aluminum 5/3 Center Closed - 855G65 Aluminum 5/3 Center Open / ➀ G Brass 3/, 5/ EF855G03 ➁ EF855G0 ➁ 36L Stainless Steel 3/, 5/ EV855G09 ➂ EV855G0 ➂ Aluminum 3/, 5/ / G0 8553G0 0./F.6/F /8 inch NPT exhaust for aluminum and brass. ➁ Brass construction supplied standard with EF solenoid. ➂ Stainless steel construction supplied standard with EV solenoid _RHII_DMoR

17 3/ 5/ 5/3 855, 8553 Direct Mount Dimensions inches (mm) Series 855 NPT / L.96 (6) L 6.50 (65) H.38 () H.57 (0) W.77 (5) Manual override option MH adds.50" (6.), MS option adds.68" (.9) to each solenoid endcap. Add Suffix MO MI Optional Manual Operators 0 0 Description Push and turn to lock with flat head screwdriver slot Momentary push in with flat head screwdriver slot W Ref. 3.0 (76.7).03 (5.6) H /8 NPT 3 H /8 NPT AUX. PRESSURE PORT L 855 NAMUR Footprint / NPT / NPT L MH 0 Momentary push in by hand.6 (3) MS 0 Push and turn to lock by hand.95 () Ref. VALVE AUTOMATION Series 855 (5/3) 8553 NPT / / L (80) L 7. (89) 8.85 (5) H.38 ().77 () H.57 (0).08 (53) W.77 (5).87 (73) H 3.0 (76.7).03 (5.6) (855) / NPT (8553) / NPT / NPT Manual override option MH adds.50" (6.), MS option adds.68" (.9) to each solenoid endcap. H 5 3 Add Suffix MO MI MH Optional Manual Operators Description Push and turn to lock with flat head screwdriver slot Momentary push in with flat head screwdriver slot Momentary push in by hand W /8 NPT AUX. PRESSURE PORT L L 8553 NAMUR Footprint 855 NAMUR Footprint.77 (5).95 ().6 (3) MS 0 Push and turn to lock by hand.57 (0) 855_RHII_DMoR 0

18 VALVE AUTOMATION 0 855_RHII_DMoR

Direct Acting General Service Solenoid Valves Brass or Stainless Steel Bodies /" and 3/8" NPT / 83 Features Direct acting operation and high flow construction Direct acting, high flow slide-style

19 Direct Acting General Service Solenoid Valves Brass or Stainless Steel Bodies /" and 3/8" NPT / 83 Features Direct acting operation and high flow construction Direct acting, high flow slide-style valve Optional flow control regulates cylinder speed independently, in either direction Mechanical detent on dual solenoids holds last position, even after loss of electric power, pneumatics or pressure No Minimum Operating Pressure Differential required to shift valve Dual solenoid operation: solenoid may be energized momentarily (/0 second) or continuously Mountable in any position % ^ ) -WAY Construction Valve Parts in Contact with Fluids Body Brass 30 Stainless Steel Seals and Discs NBR and FKM Core Tube 305 Stainless Steel Core and Plugnut 30F Stainless Steel Springs 30 Stainless Steel / 7-7 PH Stainless Steel Shading Coil Copper Sleeve PA Seats Graphite-filled PTFE E B A P Electrical Standard Coil and Class of Watt Rating and Power Consumption Solenoid Enclosures Spare Coil Part Number General Purpose Explosionproof VA VA Watts Holding Inrush F F Standard Voltages:, 0, 0, 80 volts, 60 Hz., 0, 5, 0, 30 volts, 50 Hz. Other voltages are available when required. Note: No combination 0/60, 0/50 coil available. Must order either 0/60 or 0/50, etc. Standard: Watertight, Types,, 3, 3S,, and X. Optional: Explosionproof and Watertight, Types 3, 3S,, X, 6, 6P, 7, and 9. (To order, add prefix EF to catalog number.) See Optional Features Section for other available options. 83R Nominal Ambient Temp. Ranges Standard Class F insulation: 3 F to 5 F (0 C to 5 C) Optional Class H insulation: 3 F to 0 F (0 C to 60 C) Approvals Dual Solenoid CSA certified. UL listed as General Purpose Valves. Meets applicable CE directives. 75

20 / 83 Specifications (English units) -WAY Cv Flow Factor SINGLE SOLENOID CONSTRUCTION Air-Inert Gas Operating Pressure Differential (psi) Water Fluid Temp. F Brass Body Stainless Steel Body Lt. 300 SSU Catalog Number Ref. Catalog Number Ref. / 3/ G00 83G70 0./F 3/8 3/ G003 83G703 0./F DUAL SOLENOID CONSTRUCTION / 3/ G G70 6./F 3/8 3/ G0 3 83G7 6./F With built-in flow control (Suffix "M"), the Cv is 0. and an 0.5 psi minimum operating pressure is required. Specifications (Metric units) (mm) Kv Flow Factor (m3/h) SINGLE SOLENOID CONSTRUCTION Air-Inert Gas Operating Pressure Differential (bar) Water Fluid Temp. C Brass Body Stainless Steel Body Lt. 300 SSU Catalog Number Ref. Catalog Number Ref. / G00 83G70 0./F 3/ G003 83G703 0./F DUAL SOLENOID CONSTRUCTION / G G70 6./F 3/ G0 3 83G7 6./F With built-in flow control (Suffix "M"), the Kv is 0.38 and an 0.03 bar minimum operating pressure is required. Dimensions inches (mm) Ref.,, 3, 76 83R

Control & Power, Inc

Control & Power, Inc Way/ 2 and 3 Position Four ported valves are generally used to operate double-acting cylinders or actuators. They have four or five pipe connections, commonly called ports: One pressure inlet. Two cylinder