LAP4, LAP8. Pneumatic linear drive sizes 4 and 8

Size: px
Start display at page:

Download "LAP4, LAP8. Pneumatic linear drive sizes 4 and 8"

Transcription

1 Pneumatic linear drive sizes 4 and Torsional and bending resistant profiles T-slots in the outer profile enable individual mounting options Adjustable guiding system (LAP4) Precise linear roller guiding (LAP) Technical data Medium Filtered, lubricated or non-lubricated compressed air Operation: Double acting with cushioning Operating pressure: 0 bar max. Variants: LAP4-50-K-A-... position cylinder, direct acting LAP4-50-K-C-... position cylinder, double stroke LAP-63-K-A-... position cylinder, direct acting LAP-63-K-C-... position cylinder, double stroke Operating temperature: - C to +60 C (please contact our technical service for use below + C) Strokes: 000 mm (direct acting, LAP4) 00 mm (direct acting, LAP) 3000 mm (double stroke, LAP4/LAP) Strokes longer as on request Ordering information See page Mountings and switches See page Materials: Guiding profile: anodised aluminium End plate: steel, powder coated Covering: polyamid Seals: perbunan /07 Our policy is one of continued research and development. We therefore reserve the right to amend, N/UK

2 Options selector LAP / Size Profile 00 x 35 4 Profile 50 x 0 Cylinder diameter (mm) 50 (LAP4) (LAP) 063 Carriage variants Carriage length 00 mm (LAP4/LAP) K Carriage length 300 (LAP4), 540 mm (LAP) L Carriage length 0 mm, cross bar (only LAP) M Strokes (mm) LAP4 (direct acting) max. 000 LAP4 (double stroke) max LAP (direct acting) max. 00 LAP (double stroke) max Variants Direct acting Double stroke A C Ordering information Pneumatic linear drive with internal roller guide, cylinder diameter 63 mm, carriage length 00 mm, double stroke and stroke 00 mm quote: LAP-063-K-C/00 Switch Cable Connecting cable with socket M x Model Inductive Type PVC, 3 x 0,5, 5 m long 4540 PUR, 3 x 0,5, 5 m long Type Voltage Current max. Temperature LED Switching position Plug See data sheet V DC 0, A -5 to +70 C PNP NO M x N/UK V DC 0, A -5 to +70 C PNP NC M x N/UK Accessories Sensor activator LAP4 Sensor activator LAP Mounting for proximity Mounting nut M6 Mounting nut M switch Model see page 7 see page 7 see page 7 see page 7 see page 7 LAP LAP Warning These products are intended for use in industrial systems only. Do not use these products where values can exceed those listed under Technical Data. Before using these products specified for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. N/UK Our policy is one of continued research and development. We therefore reserve the right to amend, /07

3 Technical data Type Repeatability Max. speed *) Max. operating pressure/force (bar/n) LAP4 ±,0 mm m/s (direct acting), m/s (double stroke) 6/40 (direct acting), 0/700 (double stroke) LAP ±,0 mm m/s (direct acting), m/s (double stroke) 6/440 (direct acting), 0/00 (double stroke) *) dependent on stroke and load Loading values for pneumatische Antriebe LAP4 and LAP The values stated in the tables show the single forces in the directions Fy and Fz as well as the maximum moments Mx, My and Mz for a speed of 0, m/s respectively. A requirement for using these values is a constant movement (no jerking) of the mass over the whole stroke length of the cylinder. The reference point from which the moments for all cylinders should be calculated is the centerline of the carriage. Total loads When a LINTRA toothed belt actuator has to take several loads and moments, an additional calculation is necessary using this formula: Mx + My + Mz + Fy + Fz <_ Mx max My max Mz max Fy max Fz max Mx My Fz' Fz Fx Fy Mz LAP4 LAP4 LAP LAP LAP Carriage 00 mm Carriage 300 mm Carriage 00 mm Carriage 300 mm Carriage 540 mm (cross bar) Fx (N) Fy (N) Fz (N) Mx (Nm) My (Nm) Mz (Nm) The forces and moments indicated are max. individual loads in the elastic area. They decrease by forces superpositon of forces and moments or by changing the safety factor. /07 Our policy is one of continued research and development. We therefore reserve the right to amend, N/UK

4 Basic variants position cylinder, direct acting 3 position cylinder, double stroke Stroke Cylinder Carrige 3 Body 4 Belt 5 Pulley / LAP X 63 L4 00 ø 3 G 3/ L3 50 M5 0 L L L 5 X Stroke Groove for sensor activator (,7 mm deep) Pneumatic linear drive LAP4, direct acting Typ L L L L3 L4 Weight at 0 mm Weight per 00 mm Weight of carriage LAP4-50-K-A 60+( x stroke) stroke 7+stroke 6,4 kg,75 kg,65 kg LAP4-50-L-A 360+( x stroke) stroke 7+stroke 7,6 kg,75 kg,95 kg Pneumatic linear drive LAP4, double stroke Typ L L L L3 L4 Weight at 0 mm Weight per 00 mm Weight of carriage LAP4-50-K-C 60+stroke (/ x stroke), kg,45 kg,65 kg LAP4-50-L-C 360+stroke (/ x stroke) 9,7 kg,45 kg,95 kg N/UK Our policy is one of continued research and development. We therefore reserve the right to amend, /07

5 LAP with cross bar L L L ø Z Z L5 L6 L G 3/ LAP with table plate 40 0 M5 Z 0 90 L L L3 0 9,5 0 9 ø Z Z L5 L6 L G 3/ 9 Stroke 6,5 3 Thread channel M5 Cover strip 7 Pneumatic linear drive LAP, direct acting Typ L L L L3 L5 L6 Weight at 0 mm Weight per 00 mm Weight of carriage LAP-63-K-A 40+( x stroke) 00 +stroke stroke 3, kg 3,9 kg 5, kg LAP-63-L-A 600+( x stroke) stroke stroke 3, kg 3,9 kg, kg LAP-63-M-A 40+( x stroke) 0 5+stroke stroke 3,7 kg 3,9 kg 4, kg Pneumatic linear drive LAP, double stroke Typ L L L L3 L5 L6 Weight at 0 mm Weight per 00 mm Weight of carriage LAP-63-K-C 50+stroke (/ x stroke), kg,5 kg 5, kg LAP-63-L-C 60+stroke (/ x stroke) 5, kg,5 kg, kg LAP-63-M-C 50+stroke (/ x stroke),7 kg,5 kg 4, kg /07 Our policy is one of continued research and development. We therefore reserve the right to amend, N/UK

6 Switch mounting LAP Switch mounting LAP Sensor activator Proximity switch Groove key (zinc coated steel) Type G Weight 00 M6 0,006 kg 0 M 0,006 kg 0 0 4,3,5 G /07 Our policy is one of continued research and development. We therefore reserve the right to amend, N/UK

M/46800/M, M/46800/HM, M/46800/PM

M/46800/M, M/46800/HM, M/46800/PM External guides for heavy loads over long distances Rigid, reinforced aluminium profile provides greater load support T-slots in the outer profile enable individual mounting options Precision guidance

More information

M/44000/M. LINTRA Rodless cylinders Magnetic piston Double acting Ø 25 to 40 mm

M/44000/M. LINTRA Rodless cylinders Magnetic piston Double acting Ø 25 to 40 mm LINTRA Rodless cylinders Magnetic piston Double acting Ø 5 to 40 mm New compact, space-saving design Proven sealing system Integral switch mounting Adjustable cushioning Magentic piston as standard Technical

More information

M/46900/IA, M/46900/M

M/46900/IA, M/46900/M TWIN-LINTR Rodless Cylinders Non-magnetic and Magnetic Piston Double acting Ø 25 and 4 mm Double stroke compared with conventional cylinders Design covered by patent Maximum stroke length from minimal

More information

A44000, LINTRA-LITE Rodless Cylinders Non-magnetic and Magnetic Piston, double acting

A44000, LINTRA-LITE Rodless Cylinders Non-magnetic and Magnetic Piston, double acting > > Ø 25... 40 mm > > New compact, spacesaving design > > Proven sealing system > > Integral switch mounting > > uffer or adjustable cushioning > > Standard foot mountings Technical features Medium: Compressed

More information

M/146000, M/146100, M/146200

M/146000, M/146100, M/146200 LINTR PLUS rodless cylinders Magnetic piston and non-magnetic piston Double acting Ø 3 to 50 mm New lightweight design extrusion with universal mounting grooves Proved and patented sealing system Dust

More information

124

124 124 www.danahermotion.com Linear Units Linear Rod Units VarioLine, Movotrak Linear units with rod Perfect for hydraulics and pneumatics replacement Load up to 40 000 N High accuracy ball screw drive High

More information

M/146000/EX, M/146100/EX, M/146200/EX, LINTRA PLUS cylinder Magnetic & Non-magnetic piston, double acting

M/146000/EX, M/146100/EX, M/146200/EX, LINTRA PLUS cylinder Magnetic & Non-magnetic piston, double acting M/46000/X, M/4600/X, M/4600/X, LINTR PLUS cylinder > Ø 6... 80 mm > New lightweight design extrusion with universal mounting grooves > Proved and patented sealing system > Interchangeability with series

More information

Ball rail actuator/guide - RK DuoLine Z/R

Ball rail actuator/guide - RK DuoLine Z/R Ball rail actuator/guide - RK DuoLine Z/R All-round talent with protected guide system Fixing slots in the guide profile and carriage 9Simple 9 connection of accessories 9Excellent 9 fixing options for

More information

MTB 42 Belt Driven Linear Actuator

MTB 42 Belt Driven Linear Actuator LINEAR ACTUATOR TECHNOLOGY MT Series MTB Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features

More information

A5 BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK

A5 BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK Belt-driven rodless electric axis with a V-Lock interface. The structure features an extremely lightweight yet high-strength anodised aluminium extruded

More information

Roller guide actuator/guides - SQ /SQZ

Roller guide actuator/guides - SQ /SQZ Roller guide actuator/guides - SQ /SQZ Timing-belt unit with optimum connecting options due to slots in guide profile/carriage Fixing slots 9Easy 9 fixing of linear actuator 9Simple 9 connection of accessories

More information

Roller guide actuators - SQ ZST

Roller guide actuators - SQ ZST Roller guide actuators - SQ ZST Rack and pinion with fixed carriage, also for larger travels up to 30 m RK Standard motor 9Choice 9 of motor and motor adaptor plate to suit your requirements 9 9Simple

More information

110

110 110 www.danahermotion.com Linear Units Linear Lifting Units SpeedLine, Movo Z Developed for lifting applications Telescopic models available Models with ball screw or belt drive Load up to 750 kg High

More information

Profile guide/actuator - PLM

Profile guide/actuator - PLM Profile guide/actuator - PLM The small range for positioning small loads Control knob with vernier 9Simple 9 adjustment of carriage Screw cover 9Protection 9 of drive screw against contamination Connecting

More information

96

96 96 www.danahermotion.com Linear Units Linear Units with Belt Drive and Wheel Guide SpeedLine, ForceLine Velocity Noise Acceleration Maintenance Repeatability Cost Force Guide Robustness Load Torque Stiffness

More information

Linear Units with Belt Drive and Slide Guide

Linear Units with Belt Drive and Slide Guide 84 www.danahermotion.com Linear Units Linear Units with Belt Drive and Slide Guide Movopart Velocity Noise Acceleration Maintenance Repeatability Cost Force Guide Robustness Load Torque Stiffness Typical

More information

Profile guide/actuator - RK Compact

Profile guide/actuator - RK Compact Profile guide/actuator - RK Compact Slimline short-stroke linear actuator for hand adjustment with excellent price-performance ratio Control knob with vernier Simple adjustment of carriage Backlash of

More information

MT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR

MT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR MT Series MTB BELT DRIVEN LINEAR ACTUATOR LINEAR ACTUATOR TECHNOLOGY The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA FEATURES

More information

Interchangeability Versatility Durability Integration LINTRA PLUS ADVANTAGE

Interchangeability Versatility Durability Integration LINTRA PLUS ADVANTAGE Interchangeability Versatility Durability Integration LINTRA PLUS ADVANTAGE 02 LINTRA PLUS LINTRA PLUS RELIABLE, DURABLE & PROVEN LINTRA Plus builds on the well-proven reputation of Norgren s existing

More information

Toothed belt axes DGE

Toothed belt axes DGE Toothed belt axes DGE Toothed belt axes DGE Key features At a glance Precision, rigid guide Highly adaptable, thanks to wide choice of mounting and attachment options Wide range of options for attaching

More information

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M

PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane

More information

LM-P608 Portal Axis. Features. Versions

LM-P608 Portal Axis. Features. Versions The LM-P608 portal axis is the universally suitable axis from our linear axis program. With a profile cross section of 80 x 80mm and a permissible load of up to 60 kg it meets the demands of the applications

More information

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LL)

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LL) LL RE-CIRCULATING BALL BEARING (SERIES LL) Patented re-circulating ball bearing guide system. Excellent price / performance ratio. Several T-nut mounting options. Optional mounting accessory kits are available.

More information

ELECTRIC AXIS ELEKTRO SVAK SERIES ACTUATORS

ELECTRIC AXIS ELEKTRO SVAK SERIES ACTUATORS ELECTRIC AXIS ELEKTRO SVAK SERIES 1 ELECTRIC AXIS ELEKTRO SVAK SERIES This belt-driven rodless electric actuator is characterised by the fact that the motor and reducer unit is integral with the carriage,

More information

The new performance class...

The new performance class... The new performance class... 10/2017 EP(X)-II 30/40 EP(X)-II 30/40 twin tube actuator The latest generation of twin tube units Move-Tec EP(X)-II 30/40 Your application takes centre stage slow langsam A

More information

Guide axes ELFA, without drive

Guide axes ELFA, without drive Guide axes ELFA, without drive Guide axes ELFA, without drive Key features At a glance Driveless linear guide units with guide and freely movable slide The guide axis is designed to support force and torque

More information

Our policy is one of continued research and development. We therefore reserve the right to amend,

Our policy is one of continued research and development. We therefore reserve the right to amend, Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed

More information

NAMUR FLANGE: With integrated exhaust air recirculation Ordering information

NAMUR FLANGE: With integrated exhaust air recirculation Ordering information 00 TÜV-approval based on IEC 6 08, DIN V 9 Approvals: DIN EN 6/9 DVGW, group Rm and EN 6 Valves for safety systems to SIL or AK 7 / Directional control valves Actuation: electromagnetic Directly controlled

More information

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LM)

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LM) LM RE-CIRCULATING BALL BEARING (SERIES LM) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. Available in any length up

More information

Product Description. Characteristic features R310A 2402 ( ) Linear Modules MLR

Product Description. Characteristic features R310A 2402 ( ) Linear Modules MLR 9 Bosch Rexroth Corporation R310A 40 (1.11) MLR Product Description Characteristic features MLR...: with Cam Roller Guide and Toothed Belt Drive for high-speed applications (up to 10 m/s) with Cam Roller

More information

ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS

ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES 1 ELECTRIC AXIS - RODLESS ELEKTRO SK SERIES Electric axis without screw piston rod, with V-Lock interface. The cylinder frame is made of anodized extruded

More information

M/ Rotary cylinders Rack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 125 mm

M/ Rotary cylinders Rack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 125 mm otary cylinders ack & pinion version Magnetic or non-magnetic piston Double acting Ø 32 to 25 mm Suitable torques from,2 to 5,0 Nm/bar otation angles 90, 80, 270, 360 Adjustable cushioning Male and female

More information

SBM TECHNOLOGY Cooling / Air Recovery Valve

SBM TECHNOLOGY Cooling / Air Recovery Valve SBM TECHNOLOGY Cooling / Air Recovery Valve Part no. VSP15203x Advanced high pressure seal technology Integrated non-return valve Robust, compact & lightweight design Proven & reliable technology Maintenance

More information

Double acting. Compressed filtered air with or without lubrication. Lubrication, if be used, must be continous.

Double acting. Compressed filtered air with or without lubrication. Lubrication, if be used, must be continous. Double acting Standard executions Version Symbol Type Parallel from bore 25 mm. S4 On request, they can be supplied according Directive 94/9/EC - ATEX II 2 GDc T5 Options Special versions on request Suffix

More information

High pressure valves. 80 to 350 bar

High pressure valves. 80 to 350 bar 80 to 350 bar High switchable p Hermetically sealed poppet valves Excellent repeatability of switching times Function even with lager voltage tolerance Compact design DN to DN 40 Technical data Medium:

More information

Linear drives DGC Key features

Linear drives DGC Key features Linear drives DGC Linear drives DGC Key features General information Compact fitting length relative to stroke Loads and devices can be directly mounted on the slide Three types of cushioning available:

More information

V SWISS MADE LINEAR TECHNOLOGY

V SWISS MADE LINEAR TECHNOLOGY Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile

More information

NOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Z centric gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove

NOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Z centric gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove NOMENCLATURE RZP -A - 100-1 / GA / V RÖHM Z centric gripper Pneumatic A = Alternative jaw fixture by tongue and groove Sizes 64-300 Jaw stroke variant 1 = long stroke 2 = short stroke Optional: spring

More information

Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD

Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17

More information

Active and Passive Brakes Series OSP-P

Active and Passive Brakes Series OSP-P Active and Passive Brakes Series OSP-P Contents Description Data Sheet No. Page Overview P-1.42.001E 69-70 Standard cylinder with Active brake P-1.42.002E 71-74 Plain bearing SLIDELINE with Active brake

More information

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm

RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation

More information

Sizes 50, 65, 80. Accessories for cables fixing. Presence of internal channels for re-lubrication Large range of axis mounting accessories

Sizes 50, 65, 80. Accessories for cables fixing. Presence of internal channels for re-lubrication Large range of axis mounting accessories > Series 5E electromechanical axis C_Electrics > 206 Series 5E electromechanical axis New Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high dynamics

More information

PNEUMATIC SLIDES (SERIES ZA)

PNEUMATIC SLIDES (SERIES ZA) ZA PNEUMATIC SLIDES (SERIES ZA) Bore 2x6, 2x8, 2x12, 2x16 or 2x20 mm. Stroke from 10 mm to 150mm. Optional end of stroke adjustments using shock absorbers, rubber bumpers, (FGD) or grub screw, (FPD). Optional

More information

Lintra Rodless Cylinder Series 46000B, 46100B, and 46200B

Lintra Rodless Cylinder Series 46000B, 46100B, and 46200B Section 10 Lintra Rodless Cylinder Series 46000B, 46100B, and 46200B Proven Applications...ACT-10-2 Features...ACT-10-4 Specifications...ACT-10-5 Series 46000B Internally Guided Carriage...ACT-10-6 Series

More information

WIESEL POWERLine and WIESEL DYNALine with ball screw drive Innovative solutions, down to the very last detail.

WIESEL POWERLine and WIESEL DYNALine with ball screw drive Innovative solutions, down to the very last detail. WIESEL POWERLine and WIESEL DYNALine with ball screw drive Innovative solutions, down to the very last detail. WIESEL POWERLine WM40 The linear drive unit for miniaturized applications. High performance

More information

Linear drives DGC-K. Festo core product range Covers 80% of your automation tasks

Linear drives DGC-K. Festo core product range Covers 80% of your automation tasks q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch

More information

Portal modules.

Portal modules. Portal modules www.comoso.com www.comoso.com Portal modules PORTAL MODULES Series Size Page Portal modules PMP 114 PMP 16 118 PMP 25 124 EPM 130 EPM 37 138 EPM 48 146 The SCHUNK program offers linear technology

More information

GRIPPERS SERIES P3 - P12 ACTUATORS

GRIPPERS SERIES P3 - P12 ACTUATORS GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made

More information

ML Series MINIATURE SCREW-DRIVEN LINEAR ACTUATOR LOW COST SOLUTION FOR PRECISION POSITIONING IN COMPACT SPACES!

ML Series MINIATURE SCREW-DRIVEN LINEAR ACTUATOR LOW COST SOLUTION FOR PRECISION POSITIONING IN COMPACT SPACES! ML Series MINIATURE SCREW-DRIVEN LINEAR ACTUATOR Compact and easy to install, a low cost linear solution perfectly suited for the medical industry, life science and small scale automation applications.

More information

26220, 26230, For single- and double-acting drives. Standard manual override with detent. Compact design. Exhaust air silencers.

26220, 26230, For single- and double-acting drives. Standard manual override with detent. Compact design. Exhaust air silencers. 60, 60, 8007 For single- and double-acting drives /, / and / Directional Control Valves Modular NAMUR design Actuation: Electromagnetic Indirectly controlled spool valves Connections G /8, G /, / NPT Standard

More information

Linear drives DGC. Festo core product range Covers 80% of your automation tasks

Linear drives DGC. Festo core product range Covers 80% of your automation tasks Linear drives DGC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity

More information

aluminum guide carriage cover with wiper and grease nipple roller hardened steel rail Example: PS 25/35 width of guide rail (35 mm)

aluminum guide carriage cover with wiper and grease nipple roller hardened steel rail Example: PS 25/35 width of guide rail (35 mm) Technical Data Versions for pneumatic linear drive: Series OSP-P aluminum guide carriage Roller Guide Powerslide Loads, Forces and Moments aluminum clamping rail hardened steel rail roller cover with wiper

More information

RM/57200/M, RT/57200/M

RM/57200/M, RT/57200/M Roundline Cylinders Magnetic Piston Double Acting Ø 8 to 63 mm Three different basic versions provide flexibility and wide range of application Magnetic piston as standard provides a wide range of control

More information

Catalogue. Portal Axes PAS

Catalogue. Portal Axes PAS Catalogue Portal xes PS Portal xes PS Table of Content Product Description............................... 2 Ballscrew axes.................................... Product description.............................

More information

Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS

Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS Sizing Performance Overview Maximum Loadings Sizing of Actuator The following steps are recommended for selection : 1. Check that maximum values in the

More information

3/2 Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface

3/2 Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface 3/ Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface Suitable for instrumental air, neutral gaseous and liquid fluids and

More information

-V- New. Linear drives DGC Features. 2 Internet:

-V- New. Linear drives DGC Features. 2 Internet: Linear drives DGC Features At a glance Without external guide, for simple drive functions Compact fitting length relative to stroke Fully interchangeable with the linear drive DGP Easy assembly and installation

More information

Our policy is one of continued research and development. We therefore reserve the right

Our policy is one of continued research and development. We therefore reserve the right For single and double operated actuators 3/2-, 5/2- and 5/3 Directional Control Valves Actuation: Electromagnetic Indirectly controlled soft seal spool valves Connection G /4, /4 NPT NAMUR Interface Exhaust

More information

Index INDEX. Product overview Technical data... 5 RHL Sliders for RHL80: V100, V250 & V RHL

Index INDEX. Product overview Technical data... 5 RHL Sliders for RHL80: V100, V250 & V RHL LINEAR UNIT RHL Svanemærket tryksag 541-713 INDEX Index Product overview... 4 Technical data... 5 RHL... 6 Sliders for RHL: V1, V25 & V5... 7 RHL11... 8 Sliders for RHL11: V2 & V5... 9 Mounting Plates...

More information

TRACK GUIDANCE SYSTEMS

TRACK GUIDANCE SYSTEMS EURO-BEARINGS LTD TRACK GUIDANCE SYSTEMS www.euro-bearings.com Tel. 01908 511733 email: sales@euro-bearings.com INTRODUCTION EURO-BEARINGS LTD www.euro-bearings.com Tel. 01908 511733 This linear guidance

More information

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LP)

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LP) RE-CIRCULATING BALL BEARING (SERIES ) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. More than one carrier per rail can

More information

ORIGA Pneumatic Linear Drives OSP-L

ORIGA Pneumatic Linear Drives OSP-L ORIGA Pneumatic Linear Drives OSP-L Very long lifetime and lowest leakage A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility.

More information

V SWISS MADE LINEAR TECHNOLOGY

V SWISS MADE LINEAR TECHNOLOGY Excerpt from main catalogue inear modules V 11-15 SWISS MDE INER TECHNOOGY ine Tech inear modules Table of contents Product overview 6 7 Design fundamentals / ubrication / Maintenance 8 Profile cross-sections

More information

Hydraulic pressure switch 20D Acc. to ATEX

Hydraulic pressure switch 20D Acc. to ATEX Acc. to ATEX 5 to 400 bar For Ex zones 1 and 2 (gases) as well as Ex zones 21 and (dusts) category II2G, type of protection EEx de IIC T6 Microswitch with gold plated contacts Electrical connection: connector

More information

ACTUATORLINE ELM series

ACTUATORLINE ELM series ACTUATORLINE ELM series www.rolloncorp.com www.motiontech.com.au Contents Series Overview 1 The Components 2 The Linear Motion System 3 Main Technical Characteristics 4 ELM 50 SP 6 ELM 65 SP 7 ELM 80 SP

More information

Active and Passive Brakes Series OSP-P

Active and Passive Brakes Series OSP-P Active and Passive Brakes Series OSP-P Contents Description Page Overview 51-52 Standard cylinder with Active brake 53-56 Plain bearing SLIDELINE with Active brake 33-34 Aluminium roller guide PROLINE

More information

highlights Double tube linear actuators

highlights Double tube linear actuators highlights GN 491 with right or left hand thread, single slider 3 Type R1 Right hand thread, single shaft end R2* Right hand thread, two shaft ends L1* Left hand thread, single shaft end L2* Left hand

More information

Spindle axes DGE Key features

Spindle axes DGE Key features Spindle axes DGE Spindle axes DGE Key features At a glance Precision, rigid guide Highly adaptable, thanks to wide choice of mounting and attachment options Wide range of options for attaching drive units

More information

Linear drives DGC-HD, with heavy-duty guide

Linear drives DGC-HD, with heavy-duty guide Linear drives DGC Key features At a glance New heavy-duty design for: Maximum loads and torques thanks to duo rail guide Long service life Ideal as a basic axis for linear gantries and cantilever axes

More information

COMPACT UNIVERSAL SLIDES

COMPACT UNIVERSAL SLIDES COMPACT UNIVERSAL SLIDES English edition 168 COMPACT UNIVERSAL SLIDES KUS CONTENTS PRODUCT DESCRIPTION 170 172 COMPACT UNIVERSAL SLIDES 173 CALCULATION PRINCIPLES/ ASSEMBLY INSTRUCTIONS 17 176 Lx Mz Kx

More information

Index. -V- New. -N- Diameters. -T- Stroke lengths. Pneumatic linear drive units DGP/DGPL Key features at a glance Festo AG & Co.

Index. -V- New. -N- Diameters. -T- Stroke lengths. Pneumatic linear drive units DGP/DGPL Key features at a glance Festo AG & Co. Index Key features at a glance 3 4 7 6 2 1 5 DGP with driver DGPL with slide -V- New Protected version GA with shock absorber kit E Version free of copper, Teflon and silicone CT Load inverter AK -N- Diameters

More information

Vertical actuators HTR Telescopic actuator with belt drive HZR Z-axis with belt drive

Vertical actuators HTR Telescopic actuator with belt drive HZR Z-axis with belt drive Vertical actuators HTR Telescopic actuator with belt drive HZR Z-axis with belt drive Catalogue: 192-560011N4/UK Version 4 / March 2002 HTR Telescopic actuator with belt drive 2 HTR Telescopic actuator

More information

PRA/182000, PRA/182000/M

PRA/182000, PRA/182000/M Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting Ø 32 to 125 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders

More information

Mini slides EGSL, electric

Mini slides EGSL, electric Key features At a glance Electric slide series Maximum performance in compact space: Precision Load capacity Dynamic response Choice of homing: To fixed stop To reference switch Perfect for vertical applications

More information

Rack and pinion axis EHMH

Rack and pinion axis EHMH Features At a glance Right-angle gear unit with a reduction ratio of i = 5 High-grade bearing guide Comprehensive accessories for individual adaptation to specific requirements Use of time-tested motorcontroller

More information

Max. particle size 5 µm. Pressure for determining piston forces. Materials:

Max. particle size 5 µm. Pressure for determining piston forces. Materials: Rodless cylinders Rodless cylinder 1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³

More information

Linear drives DGP/DGPL

Linear drives DGP/DGPL Linear drives DGP/DGPL Low space requirement High precision and load capacity Reliable service life of up to 40,000 km Specified types in accordance with ATEX directive for potentially explosive atmospheres

More information

Linear Guides Series OSP-E

Linear Guides Series OSP-E Linear Guides Series OSP-E NEW Contents Description Page Overview 101-102 Plain Bearing SLIDELINE 103-104 Roller Guide POWERSLIDE 105-108 Aluminium Roller Guide PROLINE 109-111 Heavy-duty guide HD 113-115

More information

Any reproduction, even partial, is allowed only by written permission by Rollco.

Any reproduction, even partial, is allowed only by written permission by Rollco. LINEAR UNIT E-SMART Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to

More information

RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm

RA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and

More information

Linear Guides Series OSP-E

Linear Guides Series OSP-E Linear Guides Series OSP-E NEW Contents Description Data Sheet No. Page Overview 1.40.020E 101-102 Plain Bearing SLIDELINE 1.40.021E 103-104 Roller Guide POWERSLIDE 1.40.022E 105-108 Aluminium Roller Guide

More information

Linear drives SLG, flat design

Linear drives SLG, flat design Features General information Piston 8, 12 and 18 Stroke lengths of 100 900 mm Two cushioning types selectable: Elastic cushioning Shock absorbers Direct mounting via centering holes Extremely flat design

More information

CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company

CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology

More information

Linear Guides Series OSP-P

Linear Guides Series OSP-P Linear Guides Series OSP-P NEW Contents Description Page Overview 31-32 Plain bearing guide SLIDELINE 33-34 Roller guide POWERSLIDE 35-38 Aluminium roller guide PROLINE 39-40 Recirculating ball bearing

More information

Linear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46

Linear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46 Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS

More information

Series 20 D. Pressure switches for all-fluid technique Port sizes G 1 /4 and G 1 /2

Series 20 D. Pressure switches for all-fluid technique Port sizes G 1 /4 and G 1 /2 Series 0 D Pressure switches for all-fluid technique Port sizes and Microswitch with gold-plated contacts (silver plated for outdoor variants) Plug-in connection to DIN 4650 Technical Data Fluid: Neutral

More information

SBM TECHNOLOGY PET Blow Valve Block

SBM TECHNOLOGY PET Blow Valve Block Advanced high pressure seal technology Robust, compact & lightweight design Proven & reliable technology Maintenance & service friendly High flow rate exhaust function Minimal dead space volume (< 35ml)

More information

Sizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories

Sizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories > Series 5E electromechanical axis C_Electrics > 207 Series 5E electromechanical axis New models Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high

More information

VP23. 3-way proportional pressure control valve Directly-controlled seat valve with μp-driven pressure control G 1/4 to G 3/4 Nominal diameter 8/16

VP23. 3-way proportional pressure control valve Directly-controlled seat valve with μp-driven pressure control G 1/4 to G 3/4 Nominal diameter 8/16 VP ll-digital control electronics Variable pressure control, external pressure control upon request Optional: serial interfacing with VP-Tool program Optional actuation via fieldbus (separate data sheet

More information

Passive guide axes DGC-FA, without drive

Passive guide axes DGC-FA, without drive Key features At a glance Driveless linear guide units with guide and freely movable slide The passive guide axis is designed to support force and torque capacity in multi-axis applications Higher torsional

More information

LPRA/182000/M, ISO cylinder Magnetic piston, double acting

LPRA/182000/M, ISO cylinder Magnetic piston, double acting > > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE

More information

LM SERIES LINEAR MODULE

LM SERIES LINEAR MODULE LM SERIES LINEAR MODULE THE LM RODLESS LINEAR ACTUATOR RACO s LM Linear Modules are lightweight positioning elements, which can be easily configured into a wide variety of multiple axis motion systems.

More information

WIESEL SPEEDLine WHZ80 with roller guideway and AT toothed belt

WIESEL SPEEDLine WHZ80 with roller guideway and AT toothed belt WIESEL WHZ80 with roller guideway and AT toothed belt All figures shown in millimeters. Note: Mounted wipers on request. The use of a long power bridge increases the total length. Technical data Linear

More information

Toothed belt axis EGC-TB-KF, EGC-HD-TB. Operating instructions c [ ]

Toothed belt axis EGC-TB-KF, EGC-HD-TB. Operating instructions c [ ] Toothed belt axis EGC-TB-KF, EGC-HD-TB en Operating instructions 8076268 2017-11c [8076270] Translation of the original instructions Symbols: Warning Installation and commissioning may only be performed

More information

97300 NAMUR 3/2 & 5/2 way spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, NAMUR Interface

97300 NAMUR 3/2 & 5/2 way spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, NAMUR Interface 9700 NAMUR / & / way spool valves electromagnetic actuated, indirectly controlled G /, / NPT, NAMUR Interface For single and double acting actuators / or / way function in one valve Easily interchangeable

More information

Toothed belt axes ELGG

Toothed belt axes ELGG Key features At a glance Toothed belt axis with two opposing slides Optimum price/performance ratio Ready-to-install unit for quick and easy design High reliability thanks to a tested service life of 2500

More information

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings

More information

LINEAR UNITS CT & MT

LINEAR UNITS CT & MT LINEAR UNITS CT & MT Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right

More information

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Handling Components SERVOLINE Servo Horizontal Axis SHA-340 Mechanical Part 507901 ENGLISH Edition: 05/2005 Change index Editions issued so far: Edition Comments Order number 08/2002

More information

Nugget 40, V08 series

Nugget 40, V08 series Nugget 0, V0 series Integrally ported 5/ and 5/3 Spool valves Solenoid actuated and pilot operated Ø, Ø mm or High flow from mm body width Wide range of voltages available Low profile fixed length manifolds

More information