2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50

Size: px
Start display at page:

Download "2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50"

Transcription

1 /- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5 can be combined with Safe blocked union nuts with Dual Block Technology 1) Type 01/01 P Type 31 Type 0/ Type 570 Type 519 NAMUR Pilot valve TopControl On/Off Valve block Solenoid valve Solenoid valve The complete unit of the Type 5 consists of a pneumatic rotary actuator and a ball valve body from plastic. The between the ball valve and the actuator is made via a standard interface (flange ). The rotary movement in the actuator is produced by a linear piston with angled thread coupling. The rotary actuator moves the ball valve through 90 and thereby opens or closes the port crosssection. The compact pneumatically-operated ball valve can be used for a wide range of applications and media. The pneumatic rotary actuator can also be used for other purposes. Special feature The ball valves are equipped with the so-called Dual Block Technology. This system serves as a safety device for the union nuts. It prevents these separating during operation. Technical data Orifice DN -50 Body PVC-U (PP, PVDF, PVC-C on request) PA (Polyamide, glass-fi bre reinforced) Pilot air ports Stainless steel O-rings Ball sealing Media Media temperature PVC body PP body PVDF body Ambient temperature s PVC-U PP, (PVDF on request) Control medium Pilot pressure single-acting actuator double-acting actuator EPDM, FKM PTFE Gaseous and liquid media which do not attack the body and the seal s (see chart p. ) 0 to +0 C + to +0 C 0 to +10 C - to +0 C True union Fusion spigot Neutral gases, air 5 - bar (Ø 3 mm) 5 - bar (Ø 0 mm) - bar (Ø 3 mm) - bar (Ø 0 mm) Rotation 90 ±3 Rotation time for 90 1 to 3.5 s (depending on load and control pressure) Connection Flange acc. to ISO 511 and DIN 3337 between actuator and ball valve Installation As required, preferably with actuator upright 1) Dual Block Technology is a registered trademark of FIP - Formatura Iniezione Polimeri S.p.A p. 1/

2 Technical data, continued Kvs values /-way ball valves Orifice Ø Kv value range [bar] PVC, PVDF PP size Ø doubleacting singleacting temperature chart bar PP-H bar PVC-C C C bar PVDF bar PVC-U C C Material PA Ball valve PVC-U (PP, PVDF, PVC-C on request) EPDM, FKM Ball seal PTFE p. /

3 Ordering chart for /-way ball valves (other versions on request) PVC body /-way, true union Control function Orifice size Ø Kv-value range [bar] EPDM FKM A /-way normally closed (NC) I /-way, double-acting PP body /-way, fusion spigot Control function Orifice size Ø Kv-value range [bar] EPDM FKM A /-way normally closed (NC) I /-way normally closed (NC) Flow rate: Kv value : Measured at +0 C, 1 bar pressure at valve inlet and free outlet. values [bar]: Overpressure to the atmospheric pressure Material PP, PVDF, PVC-C Additional Mounting sets for DIN resp. ISO flange on request Electrical position feedback Type (Please see Datasheet Accessories XXX.) Spacer plates and treaded inserts for instrument panel attachment or wall assembly on request p. 3/

4 Ordering chart for 3/-way ball valves (other versions on request) PVC body 3-way, true union, single-acting actuator, control function A Schaltstellung Orifice size Ø Kv-value range [bar] EPDM FKM PVC body 3-way, true union, double-acting actuator, control function I Schaltstellung Orifice size Ø Kv-value range [bar] EPDM FKM Material PP, PVDF, PVC-C Additional Mounting sets for DIN resp. ISO flange on request Electrical position feedback Type (Please see Datasheet Accessories XXX.) Spacer plates and treaded inserts for instrument panel attachment or wall assembly on request p. /

5 Ordering chart for accessories 3/-way pilote valves with banjo bolts valve FKM, seal banjo bolt NBR Valve for actuator size [Ø mm] Type inlet P (valve body) Service port A (banjo bolt) Orifice QNn value air [l/min] range [bar] Electrical coil Ind. Std. Power consumption [W] Voltage/ frequency [V/Hz] 0/DC 30/ P Tube fi tting ø mm G 1/ Form B P G 1/ G 1/ Form A 3 7 Pilot valve with NAMUR flange see Type 050 NAMUR, 5070 NAMUR, 517 NAMUR and 519 NAMUR. NAMUR adapter for pilot valves with NAMUR flange size [Ø mm] Material 3 Plastic (PA) Brass Stainless steel 3 75 Cable plug for Type 507, Form B or Type 50, Form A Plug configuration acc. to DIN EN Form B, 0 to 50 V without circuitry (Type 01 P) 3 5 Form A, 0 to 50 V without circuitry (Type 01 P, Type 0331P) p. 5/

6 Dimensions /-way size 0 size 3 9 DN ød size Ø H H1 Z L øe B1 B B /-way DN ød size Ø H Z L ØE B1 B B p. /

7 Pneumatic Type 050 (without regulating unit) Ordering chart for Pneumatic, Type 050 Control function size Ø range [bar] Flange A F0 1 1 F F F07 10 Single-acting I 3 - F F F F Double-acting Torque at the actuator shaft [Nm] Control function A size Ø 3 mm Opening with.5 or bar pilot pressure against the spring force Control function A size Ø 0 mm Opening with.5 or bar pilot pressure against the spring force Control function I size Ø 3 and 0 mm resulting torque [Nm] 1 bar 5 bar bar rotation angle Closing with spring force at 0 bar pilot pressure torque [Nm] 5 0 bar bar bar rotation angle Closing with spring force at 0 bar pilot pressure torque [Nm] Ø 0 mm Ø 3 mm 0 0 Pilot pressure [bar] p. 7/

8 Ø L K Bottom view of actuator interface with universal flange G 1/ J G H Square position acc. ISO 511 Ø A Ø B Ø C D E F Acc. DIN 3337 Actutor-Ø flange Ø A Ø B Ø C D E F G H J K Ø L SW 3 F M F M F M F M To find your nearest Burkert facility, click on the orange box In case of special application conditions, please consult for advice Subject to alteration. Christian Bürkert GmbH & Co. KG 0907/5_EU-en_ p. /

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50 2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be

More information

2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65

2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 Standard valve body Type 2000 can be combined with Short valve body High flow rate and long life cycle Very high cycle

More information

2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50

2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe

More information

2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65

2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 Type 2000 can be combined with High flow rate Long life cycle NC and NO universal s with modular universal accessory

More information

2/2-way Globe Valve for media up to +180 C, DN

2/2-way Globe Valve for media up to +180 C, DN 2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above

More information

3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics

3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics 654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...

More information

2/2 and 3/2-way ball valve with pneumatic rotary actuator

2/2 and 3/2-way ball valve with pneumatic rotary actuator 2/2 and 3/2-way ball valve with pneumatic rotary actuator Pneumatic rotary actuator Stainless steel ball valve External regulation of the pistons Full bore Type 8805 can be combined with Favourable flow

More information

2/2 or 3/2 way ball valve with pneumatic rotary actuator

2/2 or 3/2 way ball valve with pneumatic rotary actuator 2/2 or 3/2 way ball valve with pneumatic rotary actuator Pneumatic rotary actuator Stainless steel ball valve External regulation of the pistons Full bore Type 8805 can be combined with Favourable flow

More information

3/2-way Solenoid Valve for pneumatics

3/2-way Solenoid Valve for pneumatics 656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511

More information

2/2-way Globe Valve for media up to +180 C, DN

2/2-way Globe Valve for media up to +180 C, DN 2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above

More information

2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50

2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe

More information

2/2 way Angle-Seat Valve for medium up to C, DN15-50

2/2 way Angle-Seat Valve for medium up to C, DN15-50 Type 2000 can be combined with 2/2 way Angle-Seat Valve for medium up to + 180 C, DN15-50 High flow rates Very high cycle life Clamp body according to EN ISO 2852, BS 4825 or ASME BPE For process valves

More information

3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics

3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics 65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space

More information

2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65

2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65 2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position

More information

3/2-way Solenoid Valve, direct-acting, NC or NO

3/2-way Solenoid Valve, direct-acting, NC or NO 3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined

More information

3/2-way Miniature Rocker Solenoid Valve for pneumatic systems

3/2-way Miniature Rocker Solenoid Valve for pneumatic systems 66 /2-way Miniature Rocker Solenoid Valve for pneumatic systems Direct-acting High cycling rate Reduced power consumption CNOMO and Bürkert flange interface Type 66 can be combined with TEX Ex ia on request

More information

2/2-way Solenoid Valve with servo diaphragm

2/2-way Solenoid Valve with servo diaphragm 2/2-way Solenoid Valve with servo diaphragm Type 5282 can be combined with... Pivoted armature pilot drive with manual override Magnetic drive completely isolated from fluid by diaphragm Circuit function

More information

2/2 or 3/2 way direct acting rocker solenoid valve

2/2 or 3/2 way direct acting rocker solenoid valve 2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal

More information

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics /2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx

More information

2/2-way Compact Solenoid Valve, G 1/4 - G 1/2

2/2-way Compact Solenoid Valve, G 1/4 - G 1/2 2/2-way Compact Solenoid Valve, G 1/4 - G 1/2 Stainless steel body Type 6027 Compact can be combined with Direct-acting, normally closed Brass and stainless steel body Electrical connection cable plug

More information

3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base

3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base 3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override

More information

2/2-way Diaphragm Valve with plastic body, pneumatically operated,

2/2-way Diaphragm Valve with plastic body, pneumatically operated, /-way Diaphragm Valve with plastic body, pneumatically operated, - pplications with aggressive media Flow-optimised body with zero dead volume Self-draining installation possible Removable radial true

More information

Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518

Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518 3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions

More information

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm 2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions

More information

2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65

2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65 2/2-way ball valve with electric rotary actuator, ball valve in, N 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position indicator

More information

Solenoid valve. Technical data Orifice 1/4 4 Body materials Actuator material Seal material Media Viscosity. Control medium Port connections

Solenoid valve. Technical data Orifice 1/4 4 Body materials Actuator material Seal material Media Viscosity. Control medium Port connections /-way Diaphragm Valve with plastic body, pneumatically operated, 1/ 3 with true union 3 with fl ange pplications with aggressive media Flow optimised body with zero dead volume Self draining installation

More information

2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25

2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25 2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25 Type 2103 can be combined with Hermetical separation of fl uids from the operating mechanism by diaphragm Zero

More information

2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50

2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50 2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50 High cycle life Flow optimised body in stainless steel 316L Deliverable with fl ow direction below or above seat Clean design

More information

2/2 or 3/2-way Miniature Rocker Solenoid Valve

2/2 or 3/2-way Miniature Rocker Solenoid Valve 2/2 or 3/2-way Miniature Rocker Solenoid Valve Type 0127 can be combined with... For maximum chemical resistance requirements Compact design with mm width and Cv ratings up to 0.08 Proven reliability since

More information

Remote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System

Remote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules

More information

Common wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.

Common wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules. / and 4/ multi-way valves; servo assisted; DN 4; flow rate: l/min.; /8, legris ø 6 mm port connections Advantages / Benefits Optimised system solutions due to high level of modularity Compact design with

More information

Direct-acting 3/2 way plunger valve

Direct-acting 3/2 way plunger valve Direct-acting 3/2 way plunger valve Direct-acting, compact valve with diameter of up to DN 2.5 Vibration-proof, bolted coil system Banjo threaded connection for direct mounting on pneumatic valves Type

More information

2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2

2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional

More information

2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid

2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid 2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid Low internal volume Low power consumption High back pressure tightness Optional impulse model Type 6124 can be combined with...

More information

Direct-acting 2/2-way plunger valve

Direct-acting 2/2-way plunger valve Direct-acting 2/2-way plunger valve Type can be combined with Direct-acting and compact valve up to diameter of DN 6.0 Vibration-proof, bolted coil system Increased leak-tightness with welded plunger guiding

More information

2/2-way Solenoid Valve for liquids and gases

2/2-way Solenoid Valve for liquids and gases 2/2-way Solenoid Valve for liquids and gases Type 6213EV can be combined with... Coupled spring diaphragm system opened without differential pressure Waterhammer free and low noise HP00 version with increased

More information

Remote Process Actuation Control System AirLINE - Siemens ET 200S

Remote Process Actuation Control System AirLINE - Siemens ET 200S Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility

More information

AirLINE and AirLINE Quick electrical/pneumatic Automation System

AirLINE and AirLINE Quick electrical/pneumatic Automation System AirLINE and AirLINE Quick electrical/pneumatic Automation System Type 8644 can be combined with Fully compatible with Rockwell Combination of Fieldbus, pilot valves and I/O modules higher fl exibility

More information

INSERTION flow sensor for continuous flow measurement

INSERTION flow sensor for continuous flow measurement INSERTION flow sensor for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN)

More information

2/2-way Diaphragm Valve, forged valve body, weld end and clamp connection, DN 8-100

2/2-way Diaphragm Valve, forged valve body, weld end and clamp connection, DN 8-100 2/2-way Diaphragm Valve, forged valve body, weld end and clamp, DN 8-100 Type 2031 with weld end Type 2031 can be combined with Type 2031 with clamp Hermetical separation of fluids from the operating mechanism

More information

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm / or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,

More information

3/2-way Miniature Rocker Solenoid Valve for pneumatic systems

3/2-way Miniature Rocker Solenoid Valve for pneumatic systems 66 /2-way Miniature Rocker Solenoid Valve for pneumatic systems Direct-acting High cycling rate Reduced power consumption CNOMO and Bürkert flange interface Type 66 can be combined with TEX Ex ia on request

More information

2/2- and 3/2-way solenoid valve for aggressive fluids

2/2- and 3/2-way solenoid valve for aggressive fluids 2/2- and 3/2-way solenoid valve for aggressive fluids Type 0121 can be combined with Direct-acting, media-separated valve with diameter of up to DN 8 Maintenance-free pivoted armature technology Vibration-proof,

More information

2/2 or 3/2 way direct acting rocker solenoid valve

2/2 or 3/2 way direct acting rocker solenoid valve 2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal

More information

2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65

2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 Excellent combination of good control characteristic and high fl ow rates High cycle life Clean design for optimal

More information

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics /-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx

More information

The extendable type 5470 EExi can be used for block modules or for entire valve blocks (tag connectors on top, coil spacing 19 mm).

The extendable type 5470 EExi can be used for block modules or for entire valve blocks (tag connectors on top, coil spacing 19 mm). /2- and 4/2-multi-way valves ; servo-assisted; block assembly or NAMUR flange; DN 4; flow rate: 00 l/min Advantages / Benefits II 2G EEx ia IIC T6 PTB0 ATEX 275 approved Available for block assembly and

More information

3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics

3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics 654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...

More information

2/2-way Angle Seat Valve, manually operated, for media up to +180 C

2/2-way Angle Seat Valve, manually operated, for media up to +180 C 2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can

More information

Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide

Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level

More information

Electrical position feedback for actuator sizes Ø mm

Electrical position feedback for actuator sizes Ø mm Electrical position feedback for actuator sizes Ø 40-125 mm Type 1062 can be combined with Simple installation, convertible or retrofittable Self-adjusting trip cam for closed position LEDs provide local

More information

INSERTION Adaptor for analysis

INSERTION Adaptor for analysis INSERTION Adaptor for analysis Type can be combined with... Universal adaptor for type 8202 and 8222 ELEMENT s in pure, aggressive or contaminated liquids Adaptation into standard piping systems or conversion

More information

600, 630. Diaphragm Valve, Plastic

600, 630. Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical

More information

3/2-way Rocker Solenoid Valve for pneumatic systems

3/2-way Rocker Solenoid Valve for pneumatic systems 3/-way Rocker Solenoid Valve for pneumatic systems EEx ia versions Direct-acting High cycling rate Reduced power consumption Type 6104 can be combined with... Sub-base connection Approvals: Type 654 Servo-assisted

More information

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way valve has a low maintenance piston actuator which can be controlled by inert gaseous media. It has an integral optical position

More information

Pneumatic operated 2/2-way Diaphragm Valve

Pneumatic operated 2/2-way Diaphragm Valve Pneumatic operated 2/2-way Valve Light tube valve body Flow optimised body in stainless steel Zero dead volume Easy to weld Type can be combined with... Type 8640/8644 Type 6012/6014 P Type 8311 Electrical

More information

Modular pneumatic valve unit

Modular pneumatic valve unit Modular pneumatic valve unit Compact design Modular configuration High flexibility Simple exchange of valves (with option P-shut-off - also possible during operation) Type 8640 can be combined with Type

More information

Direct-acting 2/2- or 3/2-way pivoted armature valve

Direct-acting 2/2- or 3/2-way pivoted armature valve 0330 Direct-acting 2/2- or 3/2-way pivoted armature valve Direct-acting, media-separated valve with diameter of up to DN 5 Maintenance-free pivoted armature technology Vibration-proof, block screwed coil

More information

2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN

2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN 2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN 10-100 Type 2301 flange can be combined with Excellent control characteristics High cycle life Flow optimised body in

More information

Type Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material

Type Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material 2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life Excellent

More information

2/2-way Globe Control Valve, threaded port connection, DN 10-65

2/2-way Globe Control Valve, threaded port connection, DN 10-65 2/2-way Globe Control Valve, threaded port connection, DN 10-65 Type 2712 can be combined with... Classic design with interchangeable trims, 3 to 5 Kvs-value per connection port Excellent control characteristic

More information

Modular pneumatic valve unit

Modular pneumatic valve unit Modular pneumatic valve unit Compact design Modular configuration High flexibility Type 8640 can be combined with Simple exchange of valves (with option P-shut-off - also possible during operation) Type

More information

Pneumatic control unit for decentralized automation of ELEMENT process valves

Pneumatic control unit for decentralized automation of ELEMENT process valves 890 Pneumatic control unit for decentralized automation of ELEMENT process valves Type 890 can be combined with... Compact design Integrated pilot valve with manual override Integrated control air routing

More information

Tandem valve, welded valve configuration

Tandem valve, welded valve configuration Tandem valve, welded valve configuration Fully integrated in Bürkert s Process Control Systems Quality certifications Type 2034 can be combined with... Type 6012 Solenoid banjo valve Stroke limitation

More information

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance plastic piston actuator which can be controlled by inert gaseous media. Normally Closed,

More information

Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves

Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Complete modular designed accessory program More for less - optimal configuration costs Easy maintenance and commissioning

More information

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve 3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for

More information

The manifolds can be powered through various fieldbus systems, multipole or common terminals.

The manifolds can be powered through various fieldbus systems, multipole or common terminals. Servo-Assisted, Modular, 8mm Wide / and 4/ Multi-Way Valves; Servo Assisted; Flow Rate: 0.6 ft /min.; /8 NPT and /4 O.D. Legris Connections Advantages / Benefits Optimum system solutions due to high level

More information

Pneumatically operated zero dead volume T-Valve CLASSIC

Pneumatically operated zero dead volume T-Valve CLASSIC Pneumatically operated zero dead volume T-Valve CLASSIC Zero dead volume body - no welds Hermetical separation of fluids from the operating mechanism by diaphragm Universal and robust actuators with modular

More information

GEMÜ 205 Electrically operated solenoid valve

GEMÜ 205 Electrically operated solenoid valve Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator

More information

2/2 Pressure operated valves

2/2 Pressure operated valves Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54

More information

Modular pneumatic valve island

Modular pneumatic valve island Modular pneumatic valve island Compact design Modular configuration High flexibility Simple exchange of valves (with P shut off, also possible during operation an option) Type 8640 can be combined with

More information

2/2-way Angle-Seat Valve for high-quality cryogenic applications and steam

2/2-way Angle-Seat Valve for high-quality cryogenic applications and steam cryogenic extended stem 2/2-way Angle-Seat Valve for high-quality cryogenic applications and steam Type 2000 can be combined with Spring return closed or open, double-acting, manual operation Materials:

More information

Diaphragm valve, Plastic

Diaphragm valve, Plastic Diaphragm valve, Plastic Construction The GEMÜ manually operated 2/2-way diaphragm valve has a low maintenance plastic bonnet. An optical position indicator is integrated as standard. Features Suitable

More information

2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid

2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid 2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid Low internal volume Low power consumption High back pressure tightness Optional impulse model Type 612 can be combined with... DN

More information

Servo-operated 2/2-way solenoid valves Type EV220A

Servo-operated 2/2-way solenoid valves Type EV220A Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and

More information

Pneumatically operated 2/2 way diaphragm valve with stainless steel actuator

Pneumatically operated 2/2 way diaphragm valve with stainless steel actuator Pneumatically operated 2/2 way diaphragm valve with stainless steel actuator Flow optimized and deadleg free stainless steel cast or forged bodies Media separation with different diaphragm materials Trusted

More information

Inductive conductivity meter

Inductive conductivity meter Inductive conductivity meter Type 8228 can be combined with... Configurable outputs: up to 2 transistor and up to 2 analog 4... 20 ma outputs Removable backlighted display Simulation of process values

More information

Inline Paddle Wheel Flow Switch

Inline Paddle Wheel Flow Switch Inline addle Wheel Flow Switch Economic integration in pipe systems without any additional piping Magnetic measuring principle Mechanical adjustment of setpoint Type can be combined with... Valve Alarm

More information

GEMÜ R680 Motorized diaphragm valve

GEMÜ R680 Motorized diaphragm valve Motorized diaphragm valve Features Standard integral optical position indicator Optional flow direction and installation position Insensitive to particulate media Motorized alternative for applications

More information

Technical Data Sheet

Technical Data Sheet Technical Data Sheet Type 52 2/2-way solenoid valve NC - Valve normally closed (as standard) NO - Valve normally open (as option) Direct operated piston design valve. No differential pressure is necessary

More information

2/2- or 3/2-way- Rocker Solenoid Valve

2/2- or 3/2-way- Rocker Solenoid Valve 2/2- or /2-way- Rocker Solenoid Valve Direct acting Hermetic isolation of fluid 0 145 SI 1) DN 2 mm Type 6128 can be combined with... Sub-base, threaded port 22mm width per station Type 2507 Cable lug

More information

R690. Diaphragm Valve, Plastic

R690. Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The GEMÜ diaphragm valve has a low maintenance membrane actuator which can be controlled by air or inert gases. Normally Closed (NC), Normally Open (NO) and Double

More information

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction

More information

Technical Principles of Valves

Technical Principles of Valves Technical Principles of Valves Symbols and Circuit Functions Symbol to DIN-ISO 1219 The circuit function illustrations are defined to the DIN-ISO 1219 Standard. These can be used to show other switching

More information

short name: 3WL.IG* technical product sheet created :57 1/6 3-way ball valve F/F PN 63 with pneumatic actuator hard anodized aluminum

short name: 3WL.IG* technical product sheet created :57 1/6 3-way ball valve F/F PN 63 with pneumatic actuator hard anodized aluminum with pneumatic actuator hard anodized aluminum technical product sheet short name: 3WL.IG* 3-way ball valve F/F PN 63 E-Box MV Port Modell G Kugel Bauart RE06 RE06 1 1 1/ 1/ 3/" 1 1/ 1 1/ 3/" 1 1/ 1 1/

More information

Paddle-wheel flow controller for On/Off control

Paddle-wheel flow controller for On/Off control Paddle-wheel flow controller for On/Off control Type 8032 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable outputs (transistor or relay) Automatic-calibration:

More information

710, 717, 723. Ball Valve, Plastic

710, 717, 723. Ball Valve, Plastic Ball Valve, Plastic Aufbau GEMÜ 710, 717 and 72 are 2/2 or /2-way plastic ball valves available in the sizes 1/2 to 2 (DN 8 to DN 50, GEMÜ 717 to DN 100). GEMÜ 710 has a corrosion resistant low maintenance

More information

Remote Process Actuation Control System AirLINE WAGO Remote I/Os and Fieldbusses

Remote Process Actuation Control System AirLINE WAGO Remote I/Os and Fieldbusses Remote Process Actuation Control System AirLINE WAGO Remote I/Os and Fieldbusses Type 8644 can be combined with... Fully compatible with WAGO I/O Combination of Fieldbus, pilot valves and I/O modules High

More information

Электромагнитные клапаны для пара Burkert

Электромагнитные клапаны для пара Burkert По вопросам продаж и поддержки обращайтесь: Архангельск (8182)63 90 72 Астана (7172)727 132 Белгород (4722)40 23 64 Брянск (4832)59 03 52 Владивосток (423)249 28 31 Волгоград (844)278 03 48 Вологда (8172)26

More information

Cable Plug acc. to DIN EN , Form A

Cable Plug acc. to DIN EN , Form A Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with

More information

Insertion magnetic inductive flowmeter

Insertion magnetic inductive flowmeter Insertion magnetic inductive flowmeter Sensor without moving parts Flowmeter with On/Off control Application related calibration by Teach-In function Clean in place (CIP) FDA-compliant materials Type 8041

More information

Flow Controller, flow control system for gases

Flow Controller, flow control system for gases Flow Controller, flow control system for gases Highly cost effective solution, thanks to the integrated system Reliable, robust system Automatic process tune Simple to operate Type 8750 can be combined

More information

Angle Seat Control Valve 7020

Angle Seat Control Valve 7020 Angle Seat Control Valve 72 DN 8 up to DN 8 PN 4 Pneumatically operated control valves for neutral through to highly aggressive media. Integrated positioner Compact design All parts contacting the fluid

More information

2/2-way servo assisted Solenoid Valve

2/2-way servo assisted Solenoid Valve 62 2/2-way servo assisted Solenoid Valve Forced coupled diaphragm system ompact body from brass or stainless steel igh flow rate (v value) nti-waterhammer, low noise Type 62 can be combined with... Type

More information

Digital ph transmitter

Digital ph transmitter Digital ph transmitter Compact, remote versions for DN 15 to 200 Fully programmable ph transmitter functions for all kinds of ph-measurement tasks Large range of process connections with various fittings

More information

2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2

2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional

More information

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The pneumatically operated 2/2 way diaphragm valve GEMÜ is a corrosionresistant all plastic construction. It has a maintenancefree piston actuator which can be controlled

More information

Электромагнитные клапаны для агрессивных и чистых сред Burkert

Электромагнитные клапаны для агрессивных и чистых сред Burkert По вопросам продаж и поддержки обращайтесь: Архангельск (8182)63 90 72 Астана (7172)727 132 Белгород (4722)40 23 64 Брянск (4832)59 03 52 Владивосток (423)249 28 31 Волгоград (844)278 03 48 Вологда (8172)26

More information

Paddle-wheel flow controller with optical principle for On/Off control

Paddle-wheel flow controller with optical principle for On/Off control Paddle-wheel flow controller with optical principle for On/Off control Type 8039 can be combined with... Indication, monitoring, transmitting and On/Off control in one device. Programmable s (transistor

More information