Solenoid valves VZWM-L, NPT
|
|
|
- Harold Peters
- 6 years ago
- Views:
Transcription
1
2 Key features and type codes General Indirectly actuated diaphragm valve Process valve connection N14 N2 Flow rate l/min Available in brass or stainless steel casting Wide range of coils VZWM L M22C N14 F4 Type VZWM Solenoid valve, process directional control valve Design L In-line valve Valve function M22C 2/2-way valve, normally closed Process valve connection N14 NPT1/4 N38 NPT3/8 N12 NPT1/2 N34 NPT3/4 N1 NPT1 N114 NPT1 1/4 N112 NPT1 1/2 N2 NPT2 Electrical connection F4 F5 MD-2-With armature tube for solenoid coil MD-2- -PA MH-2-With armature tube for solenoid coil MH-2- -PA Housing material R1 Stainless steel casting Brass 2 Internet: Subject to change 2017/05
3 Function -M- Flow rate l/min -P- Voltage 24 V DC 110, 230 V AC General technical data Process valve connection NPT1/4 NPT3/8 NPT1/2 NPT3/4 NPT1 NPT1 1/4 NPT1 1/2 NPT2 Nominal size (DN) [mm] Valve function 2/2-way, single solenoid Design Diaphragm valve Sealing principle Soft Actuation type Electric Reset method Pneumatic spring Type of control Piloted Direction of flow Non-reversible Exhaust function No flow control Manual override None Type of mounting In-line installation Mounting position Preferably vertical Standard nominal flow rate [l/min] Flow rate Kv [m 3 /h] c value [l/sbar] b value Pressure differential [bar] Materials Housing Brass or stainless steel casting Diaphragm NBR Armature tube High-alloy steel Note on materials Contains PWIS (paint-wetting impairment substances) Max. tightening torque Connecting thread [Nm] Cover screw [Nm] Coil mounting [Nm] /05 Subject to change Internet: 3
4 Operating and environmental conditions Process valve connection NPT1/4 NPT3/8 NPT1/2 NPT3/4 NPT1 NPT1 1/4 NPT1 1/2 NPT2 Medium Compressed air in accordance with ISO :2010 [7:4:4] Neutral liquids Inert gases Water Ambient temperature 1) [ C] Medium pressure Gases [bar] Fluids [bar] Temperature of medium Gases [ C] Fluids [ C] 5 50 Max. viscosity [mm 2 /s] 22 Corrosion resistance class Brass 1 CRC 2) Stainless steel casting 3 * 1) Note ambient temperature of solenoid coils 2) Corrosion resistance class 1 according to Festo standard Components subject to low corrosion stress. Transport and storage protection. Parts that do not have primarily decorative surface requirements, e.g. in internal areas that are not visible or behind covers. Corrosion resistance class 3 according to Festo standard Components subject to high corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as solvents and cleaning agents. Valve switching times Process valve connection NPT1/4 NPT3/8 NPT1/2 NPT3/4 NPT1 NPT1 1/4 NPT1 1/2 NPT2 Gases Switching time Off [ms] On [ms] Liquids Switching time Off [ms] On [ms] Switching time of variant R1 Off [ms] On [ms] Electrical data Electrical connection NPT1/4 NPT3/8 NPT1/2 NPT3/4 NPT1 NPT1 1/4 NPT1 1/2 NPT2 F4, with armature tube for solenoid coil MD-2- -PA, must be ordered separately Operating voltage DC voltage [V DC] 24 AC voltage [V AC] 110/230 (50 60 Hz) Coil characteristics DC voltage [W] AC voltage [VA] Pull: Hold: 10.5 Protection class to EN IP65 (with plug socket) MH-2-F5, with armature tube for solenoid coil MH-2- -PA, must be ordered separately 4 Internet: Subject to change 2017/05
5 Weight [g] Brass housing Stainless steel casting housing VZWM-L-M22C-N14-F4 500 VZWM-L-M22C-N14-F5-R1 400 VZWM-L-M22C-N38-F4 450 VZWM-L-M22C-N38-F5-R1 400 VZWM-L-M22C-N12-F4 415 VZWM-L-M22C-N12-F5-R1 400 VZWM-L-M22C-N34-F VZWM-L-M22C-N34-F5-R VZWM-L-M22C-N1-F VZWM-L-M22C-N1-F5-R VZWM-L-M22C-N114-F VZWM-L-M22C-N114-F5-R VZWM-L-M22C-N112-F VZWM-L-M22C-N112-F5-R VZWM-L-M22C-N2-F VZWM-L-M22C-N2-F5-R /05 Subject to change Internet: 5
6 Dimensions 2/2-way valve Download CAD data 1 Plug socket connection to DIN EN , type A 2 Plug socket MSSD-N 3 Location for inscription labels 4 Mounting bracket HRM- Type B ±1.5 D D1 H ±2 H1 ±1.5 H2 ±1 L ±2 L1 ±1.5 L2 F T1 T2 ±0.5 ß VZWM-L-M22C-N14-F4 48 NPT1/4 M F VZWM-L-M22C-N38-F4 48 NPT3/8 M F VZWM-L-M22C-N12-F4 48 NPT1/2 M F VZWM-L-M22C-N34-F4 70 NPT3/4 M F VZWM-L-M22C-N1-F4 70 NPT1 M F VZWM-L-M22C-N114-F5 96 NPT1 1/4 M F VZWM-L-M22C-N112-F5 96 NPT1 1/2 M F VZWM-L-M22C-N2-F5 112 NPT2 M F VZWM-L-M22C-N14-F5-R1 44 NPT1/4 M F VZWM-L-M22C-N38-F5-R1 44 NPT3/8 M F VZWM-L-M22C-N12-F5-R1 44 NPT1/2 M F VZWM-L-M22C-N34-F5-R1 70 NPT3/4 M F VZWM-L-M22C-N1-F5-R1 70 NPT1 M F VZWM-L-M22C-N114-F5-R1 96 NPT1 1/4 M F VZWM-L-M22C-N112-F5-R1 96 NPT1 1/2 M F VZWM-L-M22C-N2-F5-R1 112 NPT2 M F Ordering data Process valve connection Brass housing Stainless steel casting housing Part No. Type Part No. Type NPT1/ VZWM-L-M22C-N14-F VZWM-L-M22C-N14-F5-R1 NPT3/ VZWM-L-M22C-N38-F VZWM-L-M22C-N38-F5-R1 NPT1/ VZWM-L-M22C-N12-F VZWM-L-M22C-N12-F5-R1 NPT3/ VZWM-L-M22C-N34-F VZWM-L-M22C-N34-F5-R1 NPT VZWM-L-M22C-N1-F VZWM-L-M22C-N1-F5-R1 NPT1 1/ VZWM-L-M22C-N114-F VZWM-L-M22C-N114-F5-R1 NPT1/ VZWM-L-M22C-N112-F VZWM-L-M22C-N112-F5-R1 NPT VZWM-L-M22C-N2-F VZWM-L-M22C-N2-F5-R1 6 Internet: Subject to change 2017/05
![Solenoid valves VZWM-L Accessories Mounting bracket HRM Material: Galvanised steel Dimensions and ordering data B B1 B2 D D1 H H1 L L1 Weight Part No. Type [g] 25 12.](/docs-images/74/71241675/images/7-0.jpg "5 2 6 5 37 10 40 25 39 9769 HRM-1 35 17.5 3 7 7 66 16 55 40 130 9770 HRM-2 47 23.5 3 9 7 87 23 75 59.5 246 9771 HRM-3 Ordering data Solenoid coils Voltage Part No.")
7 Solenoid valves VZWM-L Accessories Mounting bracket HRM Material: Galvanised steel Dimensions and ordering data B B1 B2 D D1 H H1 L L1 Weight Part No. Type [g] HRM HRM HRM-3 Ordering data Solenoid coils Voltage Part No. Type Solenoid coil for VZWM- -F4-1) 24 V DC MD-2-24VDC-PA 110 V AC, Hz MD-2-110VAC-PA 230 V AC, Hz MD-2-230VAC-PA Internet: solenoid coil Solenoid coil for VZWM- -F5-1) 24 V DC MH-2-24VDC-PA 110 V AC, Hz MH-2-110VAC-PA 230 V AC, Hz MH-2-230VAC-PA 1) Ambient temperature C Ordering data Plug socket Part No. Type Internet: mssd-n 3-pin, square design, connection pattern to EN , type A MSSD-N 2017/05 Subject to change Internet: 7
Solenoid valves VZWM-L
Key features and type codes Brief description Indirectly controlled poppet valve with diaphragm control Connection, valve G¼ G2 Flow rate 1,400 31,000 l/min Available in brass or stainless steel casting
Solenoid valves VZWM-L
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
Solenoid valves VZWP, servo-controlled
Key features and overview Function The solenoid valve VZWP-L- is a servo-controlled 2/2-way valve with solenoid coil. The solenoid valve is closed when de-energised. When energised, the differential pressure
Reverse jet pulse valves VZWE, solenoid actuated
Key features and product range overview Function Reverse jet pulse valves VZWE are piloted 2/2-way valves. They generate pulses of compressed air using a suitable solenoid coil for mechanically cleaning
Solenoid valves VZWF, force pilot operated
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
Standard valves to ISO Product range overview
Standard valves to ISO 15218 Product range overview Function Electrical connection Voltage Manual override Page/Internet Pilot valve to ISO 15218 Width 15 mm Plug connector type C, to EN 175301-803 Plug
Hygienic butterfly valves VZFB
Product range overview Version Type Based on standard Nominal width DN Process valve nominal pressure PN With clamp CC VZFB-A ASME BPE 1 10 4 1½ 2 2½ 3 4 Page With welded end WW VZFB-D DIN 11851 DN25 10
Proportional pressure regulators MPPES
Product range overview Function Type Circuit symbol Design Pneumatic connection 1 Proportional pressure regulators With proportional solenoid MPPES Directly actuated valve Nominal size pressurise/ exhaust
Solenoid valves VUVS/valve manifold VTUS, NPT
Solenoid valves VUVS/valve manifold VTUS, NPT Solenoid valves VUVS/valve manifold VTUS, NPT Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty valve with a long service life
-Q- Temperature range C. -L- Operating pressure bar. Vacuum filters ESF Technical data. Function
Vacuum filters Vacuum filters ESF Function -Q- Temperature range 0 +60 C -L- Operating pressure 0.95 +4 bar Accessory for the suction gripper ESG, mounted between suction cup holder and suction cup with
Angle seat valve VZXF, NPT
Angle seat valve VZXF, NPT -V- New Angle seat valve VZXF, NPT Key features Function Angle seat valves are externally actuated valves. These valves are actuated by a direct supply of compressed air. In
Solenoid valves VUVS/valve manifold VTUS, NPT
Solenoid valves VUVS/valve manifold VTUS, NPT -V- New VUVS-LT25, VTUS-25 Solenoid valves VUVS/valve manifold VTUS, NPT Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty
-H- Note. Pinch valves VZQA Features
Features VZQA-C-M22C function The pinch valve is a 2/2-way valve for controlling material flows. It is closed in normal position. The shut-off element is a tubular pinch valve sleeve made from elastomer.
Pinch valves VZQA Features
Features VZQA-C-M22C function The pinch valve is a 2/2-way valve for controlling material flows. It is closed in normal position. The shut-off element is a tubular pinch valve sleeve made from elastomer.
On-off/soft-start valves HE/HEE/HEP/HEL, D series
On-off/soft-start valves HE/HEE/HEP/HEL, D series On-off/soft-start valves HE/HEE/HEP/HEL, D series, metal design Product range overview D series service units, metal design Type Size Pneumatic connection
-V- New. Valve series VOFC. 2009/08 Subject to change Internet:
Valve series VOFC 2009/08 Subject to change Internet: www.festo.com/catalogue/... 159 Solenoid valves VOFC Key features General information The valves in the VOFC series are special 3/2-way and 5/2-way
On-off/soft-start valves HE/HEE/HEP/HEL, D series
On-off/soft-start valves HE/HEE/HEP/HEL, D series On-off/soft-start valves HE/HEE/HEP/HEL, D series, metal design Product range overview D series service units, metal design Type Size Pneumatic connection
Solenoid coils VACF Type codes
Solenoid coils VACF Type codes VACF B B2 1A Type VACF Solenoid coil, F series Solenoid coil type A B Width 30 mm, for 8 mm armature tube Width 22 mm, for 8 mm armature tube A1 Connection pattern type A,
Solenoid valves MHJ, fast-switching valves
Solenoid valves MHJ, fast-switching valves Solenoid valves MHJ, fast-switching valves Key features Innovative Versatile Reliable Easy to install Individual electrical connection via connecting cable and
Solenoid valves MFHE/Pneumatic valves VLHE
Solenoid valves MFHE/Pneumatic valves VLHE Solenoid valves MFHE/Pneumatic valves VLHE Peripherals overview 2 1 4 3 5 Accessories MFHE VLHE Page/Internet 1 Solenoid coil MSFG/MSFW 8 2 Plug socket with cable
Solenoid valves VUVB/valve terminals VTUB, NPT
Solenoid valves VUVB/valve terminals VTUB, NPT Solenoid valves VUVB/valve terminals VTUB, NPT Key features Innovative Versatile Reliable Easy to mount Valve terminal for a wide range of pneumatic applications
Solenoid valves VOVG Product range overview
Valve series VOVG Product range overview Function Symbol Version Normally Voltage [V DC] Page/ open closed 5 12 2 Internet /2-way valve In-line valve 8/vovg Semi in-line valve Sub-base valve 5/2-way valve
-H- Note. Silencers Product range overview. Version Type Connection D1 Push-in connector. For tubing I.D. Push-in sleeve diameter.
Silencers Silencers Product range overview Version Type Connection Push-in connector Sintered metal For tubing I.D. Push-in sleeve diameter Noise level M thread G thread NPT thread [db (A)] U-PK-3 3 70
Solenoid valves MH2/MH3/MH4, fast-switching valves
Solenoid valves MH2/MH3/MH4, fast-switching valves Fast-switching valves from Festo: it's not just the switching that's fast The fast-switching professionals with response times down to 2 milliseconds
Pre-assembled plug connectors Product range overview
Pre-assembled plug s Product range overview Function Electrical connection Type Cable Version Page/Internet Round plug M8, 3-pin SEA-3GS-M8-S Pg7 Straight/ SEA-GS-M8 Pg7 Straight/ solder lug M12, -pin
Solenoid valves MH2/MH3/MH4, fast-switching valves
Solenoid valves MH2/MH3/MH4, fast-switching valves Fast-switching valves from Festo: it's not just the switching that's fast The fast-switching professionals with response times down to 2 milliseconds
Pinch valves VZQA. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready
3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
Ball valves and shut off valves
Shut off valves HE Hand slide valves W Ball valves QH, manually actuated Ball valves VAPB, mechanically actuated Ball valves VAPB CR, mechanically actuated, corrosion resistant 2003/10 Subject to change
Pneumatic components for high-pressure applications
Pneumatic components for high-pressure applications Pneumatic components for high-pressure applications, series L Product range overview Function Version Type Size Pneumatic connection 1, 2 Page Direct
Solenoid/pneumatic valves, Tiger Classic
Solenoid/pneumatic valves, Tiger Classic Electrically or pneumatically actuated valves With internal or external pilot air Sturdy and reliable Specified types in accordance with ATEX directive for potentially
Servo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
Check valves H/HA/HB/HGL
Check valves H/HA/HB/HGL q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Positioners CMSX. Festo core product range Covers 80% of your automation tasks
Positioners CMSX q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Solenoid valves VUVB/valve terminals VTUB
Solenoid valves VUVB/valve terminals VTUB Solenoid valves VUVB/valve terminals VTUB Key features Innovative Versatile Reliable Easy to mount Valve terminal for a wide range of pneumatic applications Standardised
V New VSVA. Solenoid/pneumatic valves, ISO Electrically or pneumatically actuated valves. With internal or external pilot air
V New VSVA B01_01_001_E Solenoid/pneumatic valves, ISO 15 407 1 Electrically or pneumatically actuated valves With internal or external pilot air Pneumatic or mechanical reset Ausgewählte Typen nach ATEX
Branching modules FRM/Distributor blocks FRZ, D series
Branching modules FRM/Distributor blocks FRZ, D series Branching modules FRM/Distributor blocks FRZ, D series, metal design Product range overview D series service units, metal design Type Size Pneumatic
MFH MOFH JMFH JMFDH NVF3 MUFH VOFD VOFC VSNC VUVS
Solenoid coils Solenoid coils Product range overview Version Type For valve series Page/ Internet MFH MOFH JMFH JMFDH NVF3 MUFH VOFD VOFC VSNC VUVS F solenoid coil MSF VACF 3 N solenoid coil VACN-N 6 N
Push-in fittings CQ, for push-fit piping systems
Key features General information Suitable for polyamide pipes PQ-PA and aluminium pipes PQ-AL 12, 15, 18, 22 and 28 mm Internet: pq Suitable for polyamide tubing PAN and polyurethane tubing PUN 12 mm Internet:
Control block VOFA with safety function
Key features Innovative Versatile Reliable Easy to assemble Can be used for safe reversing of a hazardous movement (5/2-way solenoid valve) Can be used for safe venting (3/2-way solenoid valve function,
On-off Valves MS-EE, Inch Series Overview
On-off Valves MS-EE, Inch Series Overview Electrically actuated on-off valve for pressurising and exhausting pneumatic systems Choice of three voltage ranges 2 sizes: MS4 grid dimension.6 in, MS6 grid
Front panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent P Pushbuttons return
Pneumatic valves VUWS/valve manifold VTUS
Pneumatic valves VUWS/valve manifold VTUS -V- New VUWS-LT25, VTUS-25 Pneumatic valves VUWS/valve manifold VTUS Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty valve with
Quick availability: selected products from the VUVS series
New: focused features at an attractive price Quick availability: selected products from the VUVS series -...-S/ pneumatic valves VUWS Configurable valve VUVS Configurable valve manifold VTUS Ready-to-install
Front panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SVS-3-1/8 SVOS-3-1/8 SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent
Solenoid valves VUVG/valve terminals VTUG
Solenoid valves VUVG/valve terminals VTUG q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
Vacuum generators Key features
Vacuum generators Vacuum generators Key features Product overview Vacuum generator All Festo vacuum generators have a single-stage design and operate according to the venturi principle. The product families
Quarter turn actuators DFPB
Quarter turn actuators DFPB Quarter turn actuators DFPB Key features General The DFPB quarter turn actuator is a rack and pinion combination that converts the linear movement of the shaft. Quarter turn
Suction cups VAS/VASB
s VAS/VASB q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready
Pneumatic valves VUWS/valve manifold VTUS
Pneumatic valves VUWS/valve manifold VTUS -V- New VUWS-LT25, VTUS-25 Pneumatic valves VUWS/valve manifold VTUS Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty valve with
Silencers. Festo core product range Covers 80% of your automation tasks
Silencers q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready
3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
Solenoid valves VMPA
Key features Innovative Versatile Reliable Easy to mount Slim high-performance valves in a sturdy metal housing MPA1 (width 10 mm): flow rate up to 360 l/min MPA14 (width 14 mm): flow rate up to 670 l/min
Ball valve actuators VZPR
Ball valve actuators VZPR Ball valve actuators VZPR Key features and product range overview General Construction Characteristics -N- Connecting thread Rp¼ Rp2½ -M- Flow rate Kv 5.9 535 m 3 /h Brass design
Solenoid coils. Festo core product range Covers 80% of your automation tasks
Solenoid coils q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Limit switch attachments DAPZ
Type codes DAPZ SB M 250AC DR AR Type DAPZ Limit switch attachment Specification SB Sensor box Measuring principle I M Inductive Electrical, micro switch Operating voltage 25DC 30DC 250AC 8 V DC 30 V DC
2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
Solenoid valves VUVG/valve terminals VTUG
Solenoid valves VUVG/valve terminals VTUG q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
-H- Note. Pinch valves VZQA Features
Features Application Design Areas of application The valve can be used to control liquid and dusty media, solids and material mixtures Easy-to-clean housing (clean design) Open or closed in normal position
Examples 3/2-way valve A T NO: Symbol
1/1 Hauhinco-3_2-way valve_b1_dn3-25_pn320_pn500_x,y-intern water s 01/2016 3/2-way valve B1 X,Y - DN3 DN25 PN320, PN500 Features: Hydraulically actuated directional seat valve controlling liquid media.
Linear actuators DFPI
Linear actuators DFPI Linear actuators DFPI Key features General information Linear actuator for actuating process valves such as gate valves and shut-off valves in process automation systems Linear actuator
Quarter turn actuators DFPB
Quarter turn actuators DFPB Quarter turn actuators DFPB Key features General The DFPB quarter turn actuator is a rack and pinion combination that converts the linear movement of the shaft. Quarter turn
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
Data sheet. 2-way solenoid valves with Clip-on coils for neutral liquids and gases. January 2003 DKACV.PD.200.K B1472
Data sheet 2-way solenoid valves with Clip-on coils for neutral liquids and gases January 200 DKACV.PD.200.K.22 520B472 2 DKACV.PD.200.K.22 Danfoss A/S 0-200 Contents 2-way solenoid valves with Clip-on
Semi-rotary drives DRQ
Features 40 100 mm 16 32 mm Rotating and swivelling The linear movement of the cylinder is converted into rotational movement by a backlash-compensating gear unit. Precision is increased by backlashfree
3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics
65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space
Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
Proportional directional control valves MPYE
Key features General information The directly actuated proportional directional control valve has a position-controlled spool. This transforms an analogue input signal into a corresponding opening cross-section
-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process
Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
/ or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
2/2-way Solenoid Valve with servo diaphragm
2/2-way Solenoid Valve with servo diaphragm Type 5282 can be combined with... Pivoted armature pilot drive with manual override Magnetic drive completely isolated from fluid by diaphragm Circuit function
Proportional pressure regulators VPPX
Features LED indicators Plug socket with cable Venting at both ends Manifold block Sub-base valve Angle bracket Individual valve H-rail mounting repositionable by 180 Compressed air supply at both ends
Solenoid Valve DF-SA-series
2/2-WAY SEMI-DIRECT OPERATED NORMALLY CLOSED Solenoid Valve DF-SA-series The DF-DA is a semi-direct operated 2/2-way solenoid valve. The valve is normally closed. These valves have an orifice of 16 to
Accessories for electrical positioning systems
Accessories for electrical positioning systems Accessories for electrical positioning systems Features At a glance Bellows couplings EAMC-B page 3 One-piece coupling with threaded pin locking, suitable
Assisted lift operated 2/2-way solenoid valves Type EV250B
Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve program is especially to
Clamping cartridges/units
Clamping cartridges/units Holding, clamping and braking of round material Wide choice of variants Any assembly position 2017/11 Subject to change Internet: www.festo.com/catalogue/... 1 Clamping cartridges/units
Linear actuators DLP, Copac
Key features and type codes General -N- Diameter 80... 320 mm -T- Stroke length 40... 600 mm, additional stroke lengths upon request -O- Force 2800... 48000 N Festo Copac linear valve actuators are ideally
Feed separators HPVS
Key features and peripherals overview At a glance 1 Corrosion-resistant thanks to stainless steel plunger 2 Optimum and precise adaption options using centring sleeves 3 Supply ports optionally on top
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
Flow control valves GRO, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal Flow control function connection 2 connection 1 qnn 1) [l/min]
Pressure and vacuum switches PEV/VPEV
Pressure and vacuum switches PEV/VPEV Pressure and vacuum switches PEV/VPEV Product range overview Function Design Type Operating pressure Pneumatic connection Mechanical pressure switches Electrical connection
Lubricators LOE, D series
Lubricators LOE, D series Product range overview D series service units, metal design Type Size Pneumatic connection Pressure regulation range [bar] Grade of filtration [μm] M5 M7 Gx G¼ Gy G½ G¾ G QS4
Solenoid valves, 2/2-way servo-operated type EV220B 6-22
MAKING MODERN LIVING POSSIBLE Data sheet Solenoid valves, 2/2-way servo-operated type EV220B 6-22 EV220B 6-22 is a direct servo-operated 2/2-way solenoid valve program with connections from 1/4 to 1. This
GEMÜ 205 Electrically operated solenoid valve
Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator
Lubricators MS-LOE, MS series
Lubricators MS-LOE, MS series Lubricators MS-LOE, MS series Product range overview MS series service units Type Size Pressure regulation range [bar] Grade of filtration [μm] Pneumatic connection in housing
Solenoid Valve DF-SB-series
2/2-WAY SEMI-DIRECT OPERATED NORMALLY OPEN Solenoid Valve DF-SB-series The DF-DB is a semi-direct operated 2/2-way solenoid valve. The valve is normally open. The solenoid valves have an orifice of 16
Threaded fittings. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready
Solenoid Valve ST-IA-series
2/2-WAY INDIRECT OPERATED NORMALLY CLOSED Solenoid Valve ST-IA-series The ST-IA is an indirect operated 2/2-way solenoid valve. The valve is normally closed. The solenoid valves have an orifice of 13 to
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions
Assisted lift operated 2/2-way solenoid valves Type EV251B
Data sheet Assisted lift operated 2/2-way solenoid valves Type EV251B EV251B with assisted lift is especially suitable for applications such as closed systems with low and fluctuating pressure conditions
Filters MS-LFM/LFX, MS series, NPT
Filters MS-LFM/LFX, MS series, NPT Peripherals overview 5 3 4 1 -H- Note Other accessories: Module connector for combination with size MS6, MS9 or MS12 Internet: rmv, armv 2 1 2/3/4/5 2/3/4/5 6 Mounting
Directional Control Valve Series D1VW
Characteristics The NG6 directional control valve series D1VW provides high functional limits up to 8 l/min in combination with a very low, energy-saving pressure drop. A wide variety of spool options
Solenoid Valve ST-SA-series
2/2-WAY SEMI-DIRECT OPERATED NORMALLY CLOSED Solenoid Valve ST-SA-series The ST-SA is a semi-direct operated 2/2-way solenoid valve. The valve is normally closed. The body material can be brass or stainless
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
Directional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
Remote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
Miniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
Mounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217
1 00137795 Version Spool valve, zero overlap Sealing principle Soft sealing Mounting on manifold strip P-strip Working pressure min./max. See table below Control pressure See table below min./max. Ambient