02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,

Transcription

1 Nugget 0 V0 Series Integrally Ported 5/2 and 5/3 Spool Valves Solenoid Actuated and Pilot Operated Ø, Ø mm or High flow from mm body width Low power solenoids with a range of voltages Use valves singly or with Base Systems Low profile fixed length manifolds Modular manifolds can be DIN rail or surface mounted Technical Data Medium: Compressed air, filtered to 0µm lubricated and non-lubricated Operation: Spool valve, indirectly actuated Mounting: Through-holes in valve body or to 35 mm DIN rail using modular base system Port Sizes:, Ø mm and Ø mm (with connector blocks) Operating Pressure: Maximum 10 bar See individual details overleaf Flow Characteristics: Size Function C b A l/min Cv Kv 5/2 1 0,55,23 0,2 0,22 Ø mm 5/2 0, 0,5 3,72 0,23 0,2 Ø mm 5/2 0,2 5,7 3 0,35 0,3 5/3 APB 1,22 0,32, 2 0,3 0,2 Ambient Temperature: -20 C to +0 C Pilot Models -20 C to +50 C Solenoid Models *Consult our Technical Service for use below +2 C Materials Zinc alloy body, glass filled end caps, aluminium spool with bonded nitrile rubber seals, and glass filled co-polymer bases. Ordering Information To order, quote model number and voltage code from tables overleaf, e.g. V0551A B213A for a Solenoid Pilot Actuated, Spring and Air Return model fitted with a V d.c. coil and screwdriver operated manual override. Multipole Systems For complete Valve Islands see section /2 5/2 Twin Supply 5/3 All ports blocked mid position 5/3 Centre open exhaust mid position 5/3 Centre open pressure mid position 02/7 N/**

2 Nugget 0, V0 Series General Information 5/2 Solenoid Actuated Valves Symbol Model Manual Solenoid Operator Return Operating Pilot Weight Spares kit Overide Pilot Pressure (bar) Pressure (bar) (kg) V0551A B21*A V0551A B31*A Push Only Internal Solenoid Spring and Air ,155 V1003 K00 V055A B21*A V055A B31*A *Insert voltage code from table below. Push Only 5/3 Solenoid Actuated Valves Internal Solenoid Solenoid ,1 V1003 K00 Symbol Model Manual Pilot Operator Mid Return Operating Pilot Weight Spares kit Overide Supply Position Pressure (bar) Pressure (bar) (kg) 2 V05A B21*A V05A B31*A Push Button Internal Solenoid APB Solenoid -0, 10 0,15 V1003 K01 2 V057A B21*A V057A B31*A Push Button Internal Solenoid COE Solenoid -0, 10 0,15 V1003 K02 2 V05A B21*A V05A B31*A Push Button Internal Solenoid COP Solenoid -0, 10 0,15 V1003 K03 *Insert voltage code from table below. Pilot Actuated Valves Symbol Model Manual Operator Mid- Return Operating Pilot Weight Spares kit Override Position Pressure (bar) Pressure (bar) (kg) V0553A X0130 Pressure - Spring and Air ,5 + 0,5 x supply 0,152 V1003-K00 V05533A X0020 Pressure - Pressure ,1 V1003-K00 V0533A X0020 Pressure APB Spring and Air , V1003-K01 V05733A-X0020 Pressure COE Spring and Air , V1003-K02 V0533A-X0020 Pressure COP Spring and Air , V1003-K03 V05533A-X000 Pilot Priority Pilot -0, , V1003-K00 APB = All Ports Blocked, COE = Centre Open Exhaust, COP = Centre Open Pressure. *Voltage Codes and Spare Coils Voltage Codes Power Inrush/Hold Coil Part Number V d.c. 1 1,5 W V100-A V d.c. 2 1,7 W V100-A V d.c. 3 1,7 W V100-A13 V 50/0Hz 1,1/2, VA V100-A V 50/0Hz,1/2, VA V100-A V 50/0Hz,1/2, VA V100-A1 0V 50/0Hz 3,5/2,5 VA V100-A1 0V 50/0Hz 3,5/2,5 VA V100-A1 Electrical Details for Solenoid Operators Voltage Tolerances: ±10% Rating: 100% E.D. Inlet Orifice: 0, mm Electrical Connection: DIN 350 table C Manual Override: V055--A B21*A V055--A B31*A Push button, spring return Protection Class: IP 5 (DIN 0050) For details of connector plugs and light emitting seals see section Accessories Optional Port Connector Blocks Blanking Plate Optional Tie Rod Kits DIN Rail Blanking Plug V0551A Q00, Ø mm VO551A Q00 V0551A Q V1000 C00 1 metre V105 K01 V0551A Q00, Ø mm N/** /7

3 Nugget 0, V0 Series V0551A Models 5/2 Single Solenoid Valve V055A Models 5/2 Double Solenoid Valve x 0, x 0, x 0, x 0,,5,5,5,5 Manual Override Manual Override Manual Override 3, 1,5 3, 1,5 V05*A-B21*A Model 5/3 Double Solenoid Valve Manual Override '' '5' '1' '3' '' x0, x0,,5,5 3, 1,5 02/7 UK/**

4 Nugget 0, V0 Series V0553A X0130 Model 5/2 Single Pilot Valve V05533A X0020 and V05533A X000 5/2 Double Pilot Valves 23,5 x0. 23,5 x0.,5,5,5, ,5 1,5,5 2,5 2 1,5 21, 1,5 22,5 V05*33A-X0020 Model 5/3 Double Pilot Valve x0. '' '5' '1' '3' '',5 x0, 30,5 75 x0,,5 2 1,5 3,5 N/** /7

5 Nugget 0 V0 Series Modular Manifold for DIN rail or surface mounting 15 Position indicators C Manifold Block (A) V0551A Q01A Single Station Manifold Block 7 0 3/ (N x 1) + 3 Modular Manifold assemblies for DIN rail or surface mounting (N* x 1) / Right hand end Modular Manifold Assemblies V0AX** XXXXX Manifold assemblies for 2 to 1 stations, ** = 02 to 1. Size: Ø mm tube Dual Pressure Modular Manifold assemblies V0AX** **XXX Manifold assemblies for 2 to 1 stations, allows supply of two different inlet pressures simultaneously Size: Ø mm tube ** = 1 to 15 to indicate position of Dual Pressure Plug, e.g V0AX03 07XX indicates a 10 station base divided into groups of 3 and 7. Dual Pressure Plug V0551A Q05AA To be placed in the inlet gallery End Plate Kit (B) V0551A Q02A Consisting of 1 left hand and 1 right hand end cap with push-in connectors and DIN rail mounting system Size: Ø mm tube /5 1 B Optional Port Connector Blocks (C) Push-in port connector block with integral position indicators V0551A Q00 Size: Ø mm tube V0551A Q00 Size: Ø mm tube A Tie Rod Kits V0551A Q03** ** = Number of stations in manifold, 02 to 1. Pillar screws supplied as standard with Manifold Blocks and End Plate kits. Tie Rod Kits are an optional extra. 3/5 1 B 23 1 N = Number of stations 23 *** 1 Left hand end 15 N = Number of stations *** For mm tube 02/7 UK/**

6 Nugget 0 V0 Series Fixed Length Manifold 1,5 1 5 A G 1 / 33 Type No. of stations A V1002 G V1002 G0 V1002 G0 130 V1002 G0 1 V1002 G V1002 G 23 Note: Gaskets and valve fixing screws are supplied with these manifolds. Ø ,5,5 Blanking Plugs V105-K01 For dual pressure supply on Fixed Length Manifold. 5 1,5 27,5 3 Blanking Plate V0551A Q00 Blanking Plate for blocking off unwanted stations. 5 M2,5 Accessories Connector plugs and light emitting seals see section Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under Technical Data. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. N/** /7