ASME 350 BAR SAE 690 BAR
|
|
- Jewel Moore
- 5 years ago
- Views:
Transcription
1 GENERAL HYDRAULIC PIPES BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving Direct on to Pipe 204 SAE 690 bar - for Welding 205 SAE 690 bar - Elbow Block, Tee Block 206 SAE 690 bar - Thread, Blind 207 SCHEDULE SERIE SAE 6000 PSI SCHEDULE SERIE DIN BAR SAE 69 0 BAR
2 ASME 350 BAR GS-ASME s 350 bar 203 Design Criteria for GS-ASME s Working pressure 350 bar ASME V111 Div.2 App.4 Paragr.4-140(A) Bolts ASME V111 Div.2 App.4 Paragr TUBES & PIPES Pipe ASME B 31.3/304.1b Mat. St 52.3 Mat. Stud Bolts ASTM A 193 B7 Mat. Nuts ASTM A 194 2H CLAMPS Mat. Seal Carrier AISI 302 Special Treated Same material as pipe Seal Spiral Wound Gasket BITE TYPE VALVES Size O.D. Pipe Part No ID Code C D E F R s for ASME B36.1M and B36.19M Pipe ASTM A 193B7 Stud Bolt Bolt Torque GS-ASME 632/60.3-ST x 3/4 x Nm GS-ASME 648/88.9-ST x 1 x Nm GS-ASME 656/114.3-ST x 1 1/4 x Nm GS-ASME 664/141.3-ST x 1 1/4 x Nm GS-ASME 880/168.3-ST x 1 1/4 x Nm 24.5 ADAPTORS GS-ASME 1288/219.1-ST x 1 1/4 x Nm 31.6 GA-ASME Seal Carrier with Spiral Wound Gasket Size *Part No ID Code A B H Spiral Wound Gasket 2 ASME 3240xWT To be specified x56x5 OTHER 3 ASME 4840xWT To be specified x84x5 4 ASME 5640xWT To be specified x106x5 5 ASME 6440xWT To be specified x120x5 6 ASME 8040xWT To be specified x155x5 8 ASME 8840xWT To be specified x200x5 MACHINES TECHNICAL *) NOTE: Specify wallthickness of pipe. Bolthead, nut and thread must be lubricated with Gleitmo 800 or equal.
3 204 Grooving Direct On To Pipe TUBES & PIPES CLAMPS VALVES BITE TYPE 0.5 mm opening between pipes 1/2 21.3x / /4 26.7x / x / /4 42.2x / /2 48.3x / x / /2 21.3x7.5 08/ ADAPTORS OTHER 3/4 26.7x7.8 12/ x9.1 16/ /4 42.2x9.7 20/ /2 48.3x / x x /2 21.3x MACHINES TECHNICAL 3/4 26.7x x /4 42.2x /2 48.3x x
4 for Welding 205 CLAMPS TUBES & PIPES Welding Nipple Pipe L VALVES 1/2 21.3x Welding Hub 3/4 26.7x x /4 42.2x /2 48.3x x BITE TYPE The part number does not include the bolts. : Min. yield 450 N/mm² Min. tensile 620 N/mm² : AISI 302 Special treated : Stainless Steel and Perbunan Welding Hub 1/2 21.3x /4 26.7x x /4 42.2x /2 48.3x x /2 21.3x /4 26.7x x /4 42.2x /2 48.3x x ADAPTORS OTHER MACHINES TECHNICAL 1/2 21.3x /4 26.7x x /4 42.2x /2 48.3x x
5 206 Elbow Block, Tee Block TUBES & PIPES CLAMPS VALVES BITE TYPE Elbow Block Size Part No ID Code H L M I.D. 1/ schxxs / schxxs schxxs / schxxs / schxxs schxxs ADAPTORS OTHER MACHINES TECHNICAL Tee Block Size Part No ID Code H L M I.D. 1/ schxxs / schxxs schxxs / schxxs / schxxs schxxs For reducing Tee specify flange on port 2 or 3.
6 Male Threaded, Blind 207 TUBES & PIPES BITE TYPE OTHER ADAPTORS VALVES CLAMPS Male Threaded NPT Size Complete Part No ID Code L NPT 1/ / / / / / / / Size Complete Part No ID Code H Blind 1/ / / MACHINES 1 1/ TECHNICAL Material: See flange
GS-FLANGE SYSTEM. SAE psi
SAE 10000 psi Flange dimensions...160 Retain ring flanges...161 Grooving direct on to pipe...162 Flange for welding...163 Tee block, Elbow block...164 Blind flange...165 Seal carriers...166 Retain ring...167
More informationTUBES & PIPES SAE 6000 PSI INFORMATION GENERAL. Seamless Colddrawn AISI 316 L -Tube 211
GENERAL SAE 6000 PSI Product Page HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 Seamless Colddrawn AISI 316 L -Tube 211 Hydraulic Tube E 355
More informationJIS G (SGP)
JIS G 3452-1988 (SGP) Nominal size Outside Diameter Thickness Unit Weight (plain end) A B mm in mm in lb/ft kg/m 6 1/8 10.5 0.413 2.0 0.079 0.282 0.419 8 1/4 13.8 0.543 2.3 0.090 0.438 0.652 10 3/8 17.3
More informationCast Steel Bolted Cover Swing Check Valves Sizes: 2 thru 24 Pressure Class: 150 thru 1500
Cast Steel olted Cover Swing Check Valves s: 2 thru 24 Pressure Class: 150 thru 1500 Manufactured by Newmans 33 Newco Cast Carbon Steel olted onnet Valves Typical Newco Cast Steel olted Cover Swing Check
More informationBall & Socket Fittings (Bauer Style)
Page 96 Ball & Socket Fittings (Bauer Style) Elbow-Bauer Style 3-1/ * *1 MM 76 89 108 133 159 194 2 300 * Locking Bar (part # 9-7318) for & 1 Lever is Sold Separately 6-9038 6-9039 6-9040 6-9041 6-9042
More informationDESFLEX COMPACT FLANGES
DESFLEX COMPACT FLANGES DESFLEX COMPACT FLANGES The first original Compact Flange designed in full accordance with ASME ANSI PD 5500, Type Approved & Fire Tested. Offering weight savings of up to 88% when
More informationSTOPPLE Plus Fittings
STOPPLE Plus Fittings Sizes: 4- Through 36-inch Bulletin No: 1100.007.02 Version: 08.2014 Cross Indexing No: n/a Supercedes: 1100.007.01 (06.2014) Offset in closeup Options Description STOPPLE Plus fittings
More informationDRAWING INDEX 1 07/01/2013. Company Project Project Number Location Revision Date
DRAWING INDEX Company Project Project Number Location Revision Date LEGACY OIL & GAS INC. PIERSON PILINE TO EOG 12069 VARIOUS LSD ISSUED FOR APPROVAL January 4, 2013 Drawing No. Client No. Description
More informationACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
More informationDescription of Bolt Torque Tables
Maximum (preferred) torque required per bolt (foot pounds) to arrive at the maximum available / recommended gasket stress shown in the previous column. (4) Maximum gasket stress recommended or available
More informationMechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications
82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal
More informationUNITED BRAND FITTINGS
FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x
More informationPiping Material Specification - Piping class : CS101
Piping Material Specification - Piping class : CS101 SERVICE PROCESS (NG) BASIC MATERIAL CARBON STEEL RATING CLASS 150#, ASME B 16.5 DESIGN CODE ASME B 31.3 DESIGN TEMPERATURE NOMINAL CORROSION ALLOWANCE
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More informationHP 16 Epoxy Fittings (Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems)
HP 16 Epoxy Fittings (Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems) CHEMICAL INDUSTRIAL Fiber Glass Systems provides a broad range
More informationBore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt
More informationLong Welding Neck Flanges Catalogue
Hydraulic & Offshore Supplies Long Welding Neck Flanges Catalogue YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE LONG WELDING NECK FLANGES
More informationCopper & Copper Nickel. Pipes Fittings Flanges.
Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS
More informationFLANGE. Flanges used for
FLANGE FLANGE Flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1 2 through NPS 24 ASME B16.5: Pipe Flanges and Flanged Fittings (NPS 24 ) ASME B16.47: NPS 26
More information' ' ' ' LISTED Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts
.., I.,.,... I I...... I I ',,,, ", Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts ' ; i ',,.) I ' ' ' ' AWWA C Class 50 (3"' ANSI B. Class 5 ("' ANSI B. Class 50 (3"' c@us LISTED
More informationUNITED BRAND FITTINGS
UNITED BRAND FITTINGS ANSI B. Class 5 ( ~ ) AWWA C Class 0 (3 ~ ) Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality comprehensive line of flanged
More informationCM Body Assembly Service Parts List CM 93 and CM 04 Body Styles
Document Number Issue Date 12/01/93 Rev. Date 5/11/18 CM Body Assembly Service Parts List CM 93 and CM 04 Body Styles Body Style Identification Pump Material Body Style Pumps Built After 2004 Pumps Built
More informationBondstrand 2000M/7000M Glassfiber Reinforced Epoxy (GRE) pipe systems for marine service
Quick-Lock Taper/Taper 1-16 inch Bondstrand 2000M/7000M Glassfiber Reinforced Epoxy (GRE) pipe systems for marine service with external pressure requirements 18-40 inch Uses and applications Ballast Portable
More informationPYPLOK System It s the weldless, threadless way to join pipe/tube
The Tube-Mac PYPLOK System It s the weldless, threadless way to join pipe/tube Leakfree performance, reduced installed cost and minimised downtime The Tube-Mac PYPLOK connecting system is sparkless and
More informationIllustrated Parts List for VMAC System V Ford F250-F350 Triton 5.4 L 3-valve (with 3 bolt crank pulley)
Illustrated Parts List for VMAC System V900092 2008 Ford F250-F350 Triton 5.4 L 3-valve (with 3 bolt crank pulley) System V900102 2010-2008 Ford F250-F350 Triton 5.4 L 3-valve (with center bolt crank pulley)
More informationSealing surface pressure and bolt force
Printed in Germany 04/06 39-00004-01 REINZ-Dichtungs-GmbH Reinzstraße 3-7 89233 Neu-Ulm Deutschland Phone +49(0) 731-7046-777 Fax +49(0) 731-7046-399 www.reinz.com Sealing surface pressure and bolt force
More informationStop Needle Valves SNV-ST and SNV-SS
MAKING MODERN LIVING POSSIBLE Technical brochure Stop Needle Valves and SNV-SS www.danfoss.com/ir Stop Needle Valve, type and SNV-SS Contents Page Introduction........................................................................................
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
More informationGauge valves Type SNV-ST and SNV-SS
Data sheet Gauge valves Type and SNV-SS and SNV-SS valves are designed to meet all industrial refrigeration application requirements. Designed as service valves they provide favourable flow characteristics.
More informationFLANGES PRODUCT: STANDARD FLANGE CLASSIFICATION: PRESSURE CLASS CLASIFICATION:
FLANGES Gestión de Compras manufactures and supplies flanges according to standards ANSI, BS, DIN, JIS and ISO as well as according to customer specifications. PRODUCT: Flanges are a pipe fitting which
More informationMasoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 Pressure Reducing, Back Pressure and Differential Pressure Control 2 GE Oil
More informationProduct Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
More informationSECTION 1 Grooved Fittings
Anvil offers two different sets of stainless steel fittings. The Gruvlok Series Fittings have full flow designs formed from type 304SS pipe. The Schedule 10 fittings are fabricated from segmentally welded
More informationG-RANGE PIPE CONNECTIONS
G-RANGE PIPE ONNETIONS G-RANGE PIPE ONNETIONS Designed to meet the requirements of plant operators. Due to their efficiency, lightness and reliability, together with extreme qualities of leak tightness,
More informationFLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A
FLANGES & GASKETS Most of the flanges have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below).
More informationBolt Torque Values - FLUOROLON (Sheet Ring Gaskets / Raised Face Flanges)
Bolt Torque Values - FLUOROLON (Sheet Ring Gaskets / Raised Face Flanges) Sheet Ring Gaskets on ASME B16.5 Raised Face Flanges with ASTM A193 Gr. B7 / A194 Gr. 2H Nuts Sheet Ring Gaskets on ASME B16.5
More informationMagnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N
DESCRIPTION OPTION Magnesium Option, Late Model 80100L Front Seal, Viton, P/N 67256V 80109 Rear Seal, Viton, P/N 67257V 80110L Shifter Installed 80112L Heat Treated Yoke, P/N 62946-6 80119-6 Heat Treated
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
More informationIllustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN For a complete distributor & dealer list go to
Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN 55060 For a complete distributor & dealer list go to www.gandy.net 6680GX18-Hagie Orbit-Air Applicator Hydraulic Raven Monitor Controlled
More information(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
More informationYl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
More informationSUMMARY STAINLESS STEEL FITTINGS FITTINGS P PUSH-IN FITTINGS, STAINLESS STEEL D3.2 P STANDARD FITTINGS SERIES XA D3.8 P QUICK FITTINGS SERIES XC D3.
SUMMARY STAINLESS STEEL D3 P PUSH-IN, STAINLESS STEEL D3.2 P STANDARD SERIES XA D3.8 P QUICK SERIES XC D3.11 SUMMARY STAINLESS STEEL D3.1 PUSH-IN, STAINLESS STEEL The push-in fittings in the XR can be
More informationForged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
More informationCompressor MODEL 05G $3.00
Compressor MODEL 0G -0 $.00 Service Parts List MODEL 0G COMPRESSOR CONTENTS INTRODUCTION... I ORDERING INSTRUCTIONS... I GENERAL NOTES... i. TOOLS / OILS / FITTINGS.... CRANKCASE AND SUCTION SERVICE VALVE....
More informationNon-Return Valves - Type 801 ASME SEMPELL
SEMPELL Sempell controlled and uncontrolled Non-Return or Swing Check Valves prevent unallowable pressure built up in the turbine coming due to back-flowing steam. Features and Benefits low maintenance
More informationClass 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A. ASME B16.5 Flanges
Class 300,, Slip-On and Threaded B16.47, Ser. A ASME B16.5 Flanges Weld, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges
More informationA D V A N C E P R O D U C T S & S Y S T E M S, I N C.
MODEL SSI8 The Advance Model SSI8 Casing Spacers shall be constructed of circular carbon steel bands, which bolt together forming a shell around the carrier pipe. The spacers shall be designed with risers
More informationSTAINLESS STEEL FITTINGS AND VALVES
STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More informationGS 90 Flare Flange System Flaring and Installation Instructions
Flaring and Installation Instructions 2 GS FLANGE SYSTEM Table of contents page Introduction...3 Selection of the pipe...4 Cutting of the pipe...5 Cleaning operations before flaring...6 Clamping the pipe...6
More informationCOMPLETE REVISION December Piping
December 2015 Piping PIP PN01SA0J01 Piping Material Specification 1SA0J01 Class 150, 304/304L Stainless Steel, Jacketed Construction, 0.000 C.A. Core: Process Jacket: Steam PURPOSE AND USE OF PROCESS INDUSTRY
More information4200/4400 ONE-PIECE NON-SKIVE COUPLINGS
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules
More informationPV4 and PV6 Piston Valves
Description The and are piston isolation valves that have been designed for use on steam, condensate and other liquid sytems. Available types: and Piston ¾" shown Screwed, butt weld and socket weld connections
More informationCOMPLETE REVISION December Piping
December 2015 Piping Piping Material Specification 3SA0J01 Class 300, 304/304L Stainless Steel, Jacketed Construction, 0.000 C.A. Core: Process Jacket: Steam PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
More informationInstallation and Troubleshooting problems Associated with Isoalation Flanges October 2018 Nick Bander Engineering Manager
Installation and Troubleshooting problems Associated with Isoalation Flanges October 2018 Nick Bander Engineering Manager 1 Agenda Isolation kit installation Proper Installation Procedure Bolt torque Isolation
More information83 series Brass compression fittings Ø 1/ nominal pipe size, NPT thread
83 series rass compression fittings Ø /8..., NPT thread For use in areas of vibration Pre-assembled units No special assembly tools or heat required an be remade without damage to tube Suitable for use
More informationEAGLE TUGS. Transit Pro Option. Vehicle Types: TT-4, TT-5, TT-6, & TT-8 Engine Type: Yanmar Diesel 4TNV98 Tier II & Tier III Engine Models
EAGLE TUGS Transit Pro Option Vehicle Types: TT-4, TT-5, TT-6, & TT-8 Engine Type: Yanmar Diesel 4TNV98 Tier II & Tier III Engine Models QA018 REV00 10.20.09 QA018 REV03 02.11.12 A-2 QA018 REV03 02.11.12
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationWS-50-XLE 50hp High Cycle Diamond Wire Saw
50hp High Cycle Diamond Wire Saw Part Book April 05 www.diamondproducts.com REV. 0 50hp Electric High Cycle Pneumatic Diamond Wire Saw. Setup Recommendations. Overview. Auxiliary Accessories. Fixed Motor
More informationB U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
More informationBALL VALVE DATA SHEET NO. 01 (150#)
BALL VALVE DATA SHEET NO. 01 (150#) VALVE CODE BF101 VALVE TYPE Double Flanged Full Port BODY MATERIAL CARBON STEEL TO ASTM A 216 Gr. WCB CLASS 150# DESIGN STANDARD ISO 17292 SIZE 1/2" TO 1 1/2" 2" TO
More informationElectronic Service Manuals
Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions
More informationBondstrand 2425 Glassfiber Reinforced Epoxy (GRE) pipe systems for Marine and Offshore services for 25 bar pressure
Bondstrand 2425 Glassfiber Reinforced Epoxy (GRE) pipe systems for Marine and Offshore services for 25 bar pressure Uses and applications Ballast water Drilling muds Saltwater/seawater Cassions Fresh water
More informationType 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
More informationIllustrated Parts List for VMAC System V900079
Illustrated Parts List for VMAC System V900079 GM 6.6L C4500 C5500 004.5-005 1 - Kit Pack List, V900079... - Fastener Pack, 3800517...4 3 - Compressor Assembly, P10069...6 4 - Compressor Sub Components,
More informationER TRANSIT PARTS MANUAL. Cooling Section. Page 7-1. Cooling 05/97
Cooling Page 7-1 Plumbing Cummins 6BTA/6BG Page 7-2 Cooling Plumbing Cummins 6BTA/6BG 1 62190751 1 Tube - Coolant, Lower Radiator 2 61190162 3 Clamp - 2 1/16" - 3" 3 61190422 1 Hose - Rubber, Curved 2
More informationCIRCUIT BALANCING VALVES. MODEL NUMBER ITEM NUMBER QTY PER CARTON LIST PRICE EACH Wt (lbs.) EACH 0.75 CBV-3/4MS $ 73.
FILE NO.: USPL0.000 DATE: February, 00 SUPERSEDES: USPL0.000 DATE: June 8, 00 CIRCUIT BALANCING VALVES MODEL NUMBER ITEM NUMBER QTY PER CARTON LIST PRICE EACH Wt (lbs.) EACH MINI-SWEAT CBV-/MS 009-0 $.00
More informationIllustrated Parts List for VMAC System V Ford F Super Duty 6.0L Power Stroke Diesel Without Dual Alternators
Illustrated Parts List for VMAC System V900080 2007 2003.25 Ford F250-550 Super Duty 6.0L Power Stroke Diesel Without Dual Alternators 1 - Kit Pack List... 3 2 - Fastener Pack, 3800456... 5 3 - Compressor
More informationNessie Water Mist Nozzles
Data Sheet Nessie Water Mist Nozzles Applications The nozzles are tailored to atomize water in high pressure water mist systems. The nozzles are very suitable for applications within e.g.: Humidification
More informationSteel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
More informationUltra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
More informationTechnical Manual. Register 10 CONTENTS - ASG
Page: 1 Contents Register 10 CONTENTS - ASG Page Technical Data ASG-DIN...2 Technical Data ASG-ANSI...3 Material Specification ASG...4 Dimensions ASG-DIN...5 Dimensions ASG-ANSI...6 Spare Parts ASG...7
More informationBerkeley Cast Iron Impeller B6EXQBH SAE ENGINE MOUNT. Flanged Case, Packing Construction. Table I. Page Date March 4, 2013 Supersedes 01/01/04
BEXQBH Page. 8 83 84 ( X scale ) 3 3 5A 8 B/M Mtg. Spline B00 H05398 H053 -/-0T 3" Kit available for this model, P/N B9. Refer to Supplement-C of this section for list of components included with kit.
More informationChecked by Revised by
Illustrated Parts List for VMAC System V900114 2012-2010 25-3500 DODGE 4X4 Pickup & 3500 Cab & Chassis 6.7L Cummins Diesel System V900116 2012-2011 45-5500 Cab & Chassis 6.7L Cummins Diesel 1. Kit Pack
More informationIBV Series C-LF2 Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationThread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
More informationGLOBAL DRILLING SOLUTIONS, INC STOCK LIST
GLOBAL DRILLING SOLUTIONS, INC STOCK LIST Item Description Qty in Stock Lighting Equipment LED Flood Light. IECEX Certificed. Explosion proof / Zone & ; Ex d IIB T Gb; IP. / Rated voltage: 00 00VAC, 0/0Hz.
More informationGS-HYDRO PIPE & TUBES
GS-HYDRO PIPE & TUBES General Information GS-Hydro s product portfolio covers the wide range needed in high performance piping system applications (e.g. hydraulic lines): 1. Seamless cold-drawn precision
More informationFerulok Flareless Bite Type Fittings
Flareless Bite Type Fittings Flareless SAE 080101 / Flareless Flareless SAE 080601 / Flareless Flareless SAE 080102 / NPTF Flareless SAE 080120 / SAE-ORB Flareless SAE 080103 / NPTF Flareless SAE 080221
More informationABB MEASUREMENT & ANALYTICS DATA SHEET. FPD350 Torbar Averaging pitot tubes
ABB MEASUREMENT & ANALYTICS DATA SHEET FP50 Torbar Averaging pitot tubes 2 FP50 AVERAGING PITOT TUBES DS/FP50-EN REV. M Measurement made easy Economical flow metering solutions for gases, liquids and steam
More informationParts online Spare parts list
Parts online Spare parts list Refer to the Parts online web page for most up to date information. The printed information might be outdated. Contents Service, repair and wear part kits Kit list 1 Mechanical
More informationTT8101 Rotary Tedder
TT0 Rotary Tedder Illustrated Parts Breakdown Page Front End Page Page Transport Axle Assembly Cylinder Linkage Page Guards Page Page Page Page Transport Lock Assembly Lift Frame Assembly Center Tunnel
More informationProduct warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
More informationType 427, 429. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 427, 429 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.05-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
More informationCPVC HOT & COLD PLUMBING SYSTEM PRICE LIST
CPVC HOT & COLD PLUMBING SYSTEM PRICE LIST With effect from 1st June, 2015 SDR-11 (3 Mtr. Length) (Rate per mtr.) 15 ½ M011110301 100 75.00 20 ¾ M011110302 50 110.00 25 1 M011110303 30 174.00 32 1¼ M011110304
More information4300 Catalog. Metric Tube. Parker Hannifin Corporation Tube Fittings Division Columbus, Ohio
Metric Tube Q 4300 Catalog Metric Tube Q2 4300 Catalog Metric Tube Introduction Parker offers three types of seamless metric tubes for hydraulic, pneumatic and instrumentation applications: dipped for
More informationFabricated Tee Strainers Style T & TQ; 150#, 300# and 600# Flanged or Butt Weld Connections...6 Technical Data...7
07/1 Fabricated Strainers Fabricated Y Strainers Style FSA & FSSA; 10#, 00# and 600# Flanged or Butt Weld Connections... Technical Data... Style FSA & FSSA; 900#, 100# and 00# Flanged or Butt Weld Connections...*
More informationLATEST PRICE LISTS PIPES & TUBES FITTINGS VALVES CONTACT DETAILS: AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD.
LATEST PRICE LISTS 2017 PIPES & TUBES AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD. SANT INDUSTRIAL VALVES FITTINGS VS FORGED FITTINGS C BRAND ISI APPROVED G.I. FITTINGS VALVES
More informationMasoneilan * Series
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * 80000 Series Three-Way Control Valves Combining and Diverting Service 2 GE Oil & Gas Table of Contents Features...3 Numbering System...4 Ratings/Connections...4
More informationINSTALL ALL KIT COMPONENTS TO INSURE OPTIMUM PERFORMANCE OF THE REPAIRED PUMP.
Repair Parts Sheet JL-4GBS Gas Power Units L1918 Rev. C 2/99 For Date Codes Beginning With "O" INSTALL ALL KIT COMPONENTS TO INSURE OPTIMUM PERFORMANCE OF THE REPAIRED PUMP. Repair parts that are included
More informationGS-90 FLARE FLANGE SYSTEM
FLARING AND INSTALLATION INSTRUCTIONS GS-90 FLARE FLANGE SYSTEM REVISION JANUARY 2015 GS-90 GS-90 FLARE FLANGE SYSTEM Flaring and Installation Instructions Table of contents Introduction 3 Selection of
More informationErmeto Original Tubes
Ermeto Original Tubes R2 General recommendations for tubes 1. Steel types, mechanical properties, conditions Steel types, mechanical properties and conditions of EO steel tubes Steel type Tensile strength
More informationTHOMAS. Low Pressure SS Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Low Pressure SS Couplings Couplings for Structured Wall HDPE Pipe & Low Pressure Applications G1 COUPLINGS & FLANGE ADAPTORS - NON
More informationproduct catalogue Q116 ISO 9001:2008 certified
product catalogue Q116 ISO 9001:2008 certified Haelok the company Haelok fittings are considered the only mechanical alternative to welding. Haelok AG, the inventor of one of the world strongest mechanical
More informationCouplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
More informationDistributed By: M&M Control Service, Inc
Fabricated Strainers Fabricated Y Strainers Style FSA & FSSA; 150#, 300# and 600# Flanged or Butt Weld Connections...2 Technical Data...3 Style FSA & FSSA; 900#, 1500# and 2500# Flanged or Butt Weld Connections...*
More information88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
More informationIGATEC - Standard - Swivel Joints
IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International
More informationSection 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
More informationSanitary Sanitary Pipe Fitting Elbow - SMS - DIN - 3A Tee - SMS - DIN - 3A Reducer - SMS - DIN - 3A
01 SANITARY PIPE FITTING Sanitary Sanitary Pipe Fitting Elbow - SMS - DIN - 3A Tee - SMS - DIN - 3A Reducer - SMS - DIN - 3A 02 FERRULE / UNION / PIPE HOLDER Ferrule End Cap Ferrule Clamp Ferrule Gasket
More information