DRAWING INDEX 1 07/01/2013. Company Project Project Number Location Revision Date

Size: px
Start display at page:

Download "DRAWING INDEX 1 07/01/2013. Company Project Project Number Location Revision Date"

Transcription

1

2 DRAWING INDEX Company Project Project Number Location Revision Date LEGACY OIL & GAS INC. PIERSON PILINE TO EOG VARIOUS LSD ISSUED FOR APPROVAL January 4, 2013 Drawing No. Client No. Description Date Revision 12069COVER WESTVIEW PIPING MATERIAL SCIFICATION B2 CLASS CARBON STEEL LOW TEMP SWEET 25Oct12 3 WESTVIEW PIPING MATERIAL SCIFICATION D2 CLASS CARBON STEEL LOW TEMP SWEET 25Oct SYM001 TYPICAL SYMBOLOGY SHEET 4Jan PID005 LSD W1M SALES OIL TANKS AREA PIPING AND INSTRUMENTATION DIAGRAM 4Jan PID001 LSD W1M LACT SKID AREA PIPING AND INSTRUMENTATION DIAGRAM 4Jan13 A 12069PID002 LSD W1M SALES OIL PUMP AREA PIPING AND INSTRUMENTATION DIAGRAM 4Jan13 A 12069PID003 LSD W1M COMPRESSOR AREA PIPING AND INSTRUMENTATION DIAGRAM 4Jan13 A 12069PID004 LSD W1M EOG TIEIN RISERS AREA PIPING AND INSTRUMENTATION DIAGRAM 4Jan13 A 1 07/01/2013

3 PIPING MATERIAL SCIFICATION B2 SERVICE Sweet Hydrocarbon Process, Fuel Gas, Instrument Air, Glycol, LP Flare Systems, Process Vents & Drains Design Code B31.3 Pipe Material Carbon Steel ASME Pressure Class (PN 50) Corrosion Allowance 1.5 mm Non Destructive Testing (NDT) 0% visual, 5% Radiography (RT), Note 1 Post Weld Heat Treatment Branch Connection Chart Table 1 Pressure Temperature Limits > 19.1 mm WT, Per Code Based upon flange limit design C kpag F psig 45 to to to to PI Component Size NPS Ends Sch Description Notes Pipe ½ to ¾ 1 to 2,, BE 40 COMPONENTS Component Size NPS Ends Sch Class Description Notes Blind Flange ASTM A516 Gr. 70N 4, 9 Cap 40 0 Coupling 0, Full & Half 3 Cross SW, 0 3, Elbow SW, 40 0, 45º & 90º, 45º & 90º, Str, Red Elbolet 0 3, 12 Flange SW, WN 0 40 Gasket Nipple ½ to ¾ 1 to 2,, Spiral Wound c/w flexible graphite filler and s/s windings to ASME B16.20, 0 mm long min, 0 mm long min Orifice Flange 2 to 12 WN 40, c/w ½ NPT taps 4, 15 Plug 0, Bull, Hex Head Reducer 40, Conc, Ecc 14 Sockolet ¾ to 1½ SW 0 15 Studs & Nuts ALL ASTM A193 Gr. B7, Continuous Thread ASTM A194 Gr. 2H, 2 Nuts per Stud Swage SW, 0 3, , 8 8 3, 11 3, 11 3, 4, 13 4, , Tee SW, 40 0 Threadolet 0 3, 12 Union SW, 0 3, 17 Weldolet 2 to TUBING Component Size (OD) Ends Minimum Wall Thickness Description Notes Tubing Component Ball Check Gate Globe Needle NOTES: ¼ ½ ¾ 1 Size NPS 2 to 8 to 16 2 to 4 2 to 8 to 16 2 to 6 ¾ x ½ VALVES 3, 11 Ends Class Body Trim Type Port Operator Notes SW, FNPT x MNPT SS Split / Floating Split / Floating Split / Trunnion Piston / Bolted NonSlam / Wafer Swing / Bolted Lever Lever Gear Gear SS / 316L SS 316 SS /TFE/V Percentage of all butt welds for each welder to be 0% radiographed. 2. All pipe threads shall be in accordance with ASME B NPS 2 threaded piping to be used at the discretion of the stamping engineer. 4. Flange face finish shall be Ra 3.2 to 6.3 μm. 5. FP valves to be used in lines that are to be pigged, in flare systems, for block valves on PSVs and on pump suctions that are NPSH critical. 6. For use on compressor discharge and high pressure pump discharge applications. 7. FP valves for use in lines that are to be pigged. 8. ASME B ASME B ASME B ASME B MSS SP ASME B ASME B ASME B MSS SP MSS SP MSS SP1 19. API API API API Manufacturer s Standard 24. ASTM A269 3, 18 5, 19 5, 23 3, 21 6, 23 7, 22 3, 21 7, 22 7, 22 3, PIPING SCIFICATION B2 REV 3 OCTOBER 25, 2012 PAGE 1 OF 1

4 PIPING MATERIAL SCIFICATION D2 SERVICE Sweet Hydrocarbon Process, HP Flare Systems, Process Vents & Drains Design Code B31.3 Pipe Material Carbon Steel ASME Pressure Class (PN 150) Corrosion Allowance 1.5 mm Non Destructive Testing (NDT) 0% visual, 0% Radiography (RT), Note 1 Post Weld Heat Treatment Branch Connection Chart Table 1 Pressure Temperature Limits > 19.1 mm WT, Per Code Based upon flange limit design C kpag F psig 45 to to to to PI Component Size NPS Ends Sch Description Notes Pipe ½ to 1½ ½ to 1½,, SW BE BE XXS COMPONENTS Component Size NPS Ends Sch Class Description Notes Blind Flange ASTM A516 Gr. 70N 3, 8 Cap ½ to 1½ 6000 Coupling ½ to 1½ 6000, Full & Half Cross ½ to 1½ SW, Elbow ½ to 1½ SW, 6000, 45º & 90º, 45º & 90º, Str, Red, 45º & 90º, Str, Red Elbolet ½ to 1½ Flange WN WN Gasket Nipple Orifice Flange Plug ½ to 1½ ½ to 1½ 4 to 12 ½ to 1½ ½ to 1½ Reducer,, SW WN WN XXS XXS 6000 Spiral Wound c/w flexible graphite filler and s/s windings to ASME B16.20, 0 mm long min, 0 mm long min, c/w ½ NPT taps, c/w ½ NPT taps, Bull, Hex Head, Conc, Ecc, Conc, Ecc Sockolet ¾ to 1½ SW Studs & Nuts ALL ASTM A193 Gr. B7, Continuous Thread ASTM A194 Gr. 2H, 2 Nuts per Stud , 12 3, , 14 3, Swage ½ to 1½ SW, Tee ½ to 1½ SW, 6000 Threadolet ½ to 1½ Union ½ to 1½ SW, Weldolet 4 to 6 TUBING Component Size (OD) Ends Minimum Wall Thickness Description Notes Tubing Component Ball Check Gate Globe Needle NOTES: ¼ ½ ¾ 1 Size NPS ½ to 1½ 2 3 to 16 ½ to 1½ 2 to 4 ½ to 1½ ½ to 1½ 2 to 6 ¾ x ½ VALVES Ends Class Body Trim Type Port Operator Notes SW, FNPT x MNPT SS Split / Floating Split / Floating Split / Trunnion Piston / Bolted NonSlam / Wafer Swing / Bolted Lever Lever Gear Gear Gear SS / 316L SS 316 SS /TFE/V Percentage of all butt welds for each welder to be 0% radiographed. 2. All pipe threads shall be in accordance with ASME B Flange face finish shall be Ra 3.2 to 6.3 μm. 4. FP valves to be used in lines that are to be pigged, in flare systems, for block valves on PSVs and on pump suctions that are NPSH critical. 5. For use on compressor discharge and high pressure pump discharge applications. 6. FP valves for use in lines that are to be pigged. 7. ASME B ASME B ASME B ASME B MSS SP ASME B ASME B ASME B MSS SP MSS SP MSS SP1 18. API API API Manufacturer s Standard 22. ASTM A , 18 4, , 21 6, , PIPING SCIFICATION D2 REV 3 OCTOBER 25, 2012 PAGE 1 OF 1

5

6

7

8

9

10

PIP PN01CS2S01 Piping Material Specification 1CS2S01 Class 150, Carbon Steel, Socket Weld, 0.125" C.A., Process

PIP PN01CS2S01 Piping Material Specification 1CS2S01 Class 150, Carbon Steel, Socket Weld, 0.125 C.A., Process May 2016 Piping PIP PN01CS2S01 Piping Material Specification 1CS2S01 Class 150, Carbon Steel, Socket Weld, 0.125" C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the

More information

PIP PN01CA1S01 Piping Material Specification 1CA1S01 Class 150, Impact Tested Carbon Steel, Socket Weld, 0.063" C.A., Process

PIP PN01CA1S01 Piping Material Specification 1CA1S01 Class 150, Impact Tested Carbon Steel, Socket Weld, 0.063 C.A., Process December 2017 Piping Piping Material Specification 1CA1S01 Class 150, Impact Tested Carbon Steel, Socket Weld, 0.063" C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize

More information

PIP PN01CS1B02 Piping Material Specification 1CS1B02 Class 150, Carbon Steel, Butt Weld, C.A. Process

PIP PN01CS1B02 Piping Material Specification 1CS1B02 Class 150, Carbon Steel, Butt Weld, C.A. Process March 2016 Piping PIP PN01CS1B02 Piping Material Specification 1CS1B02 Class 150, Carbon Steel, Butt Weld, 0.063 C.A. Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the

More information

PIP PN03SA0B01 Piping Material Specification 3SA0B01 Class 300, 304/304L Stainless Steel, Butt Weld, C.A., Lube Oil & Seal Oil

PIP PN03SA0B01 Piping Material Specification 3SA0B01 Class 300, 304/304L Stainless Steel, Butt Weld, C.A., Lube Oil & Seal Oil May 2016 Piping PIP PN03SA0B01 Piping Material Specification 3SA0B01 Class 300, 304/304L Stainless Steel, Butt Weld, 0.000 C.A., Lube Oil & Seal Oil PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an

More information

PIP PN01SD0B03 Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, C.A., Process

PIP PN01SD0B03 Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, C.A., Process May 2016 Piping Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, 0.000 C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost

More information

Piping Material Specification - Piping class : CS101

Piping Material Specification - Piping class : CS101 Piping Material Specification - Piping class : CS101 SERVICE PROCESS (NG) BASIC MATERIAL CARBON STEEL RATING CLASS 150#, ASME B 16.5 DESIGN CODE ASME B 31.3 DESIGN TEMPERATURE NOMINAL CORROSION ALLOWANCE

More information

COMPLETE REVISION December Piping

COMPLETE REVISION December Piping December 2015 Piping Piping Material Specification 3SA0J01 Class 300, 304/304L Stainless Steel, Jacketed Construction, 0.000 C.A. Core: Process Jacket: Steam PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES

More information

COMPLETE REVISION December Piping

COMPLETE REVISION December Piping December 2015 Piping PIP PN01SA0J01 Piping Material Specification 1SA0J01 Class 150, 304/304L Stainless Steel, Jacketed Construction, 0.000 C.A. Core: Process Jacket: Steam PURPOSE AND USE OF PROCESS INDUSTRY

More information

PIP PN01SV0S01 Piping Material Specification 1SV0S01 Class 150, Alloy 254 SMO (UNS S31254), Socket Weld, C.A., Process (PTFE Packing/Gaskets)

PIP PN01SV0S01 Piping Material Specification 1SV0S01 Class 150, Alloy 254 SMO (UNS S31254), Socket Weld, C.A., Process (PTFE Packing/Gaskets) May 2016 Piping PIP PN01SV0S01 Piping Material Specification 1SV0S01 Class 150, Alloy 254 SMO (UNS S31254), Socket Weld, 0.000 C.A., Process (PTFE Packing/Gaskets) PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES

More information

Specification for: Merck. Project: Caustic Tank. Elkton, VA. Title PIPING SPECIFICATIONS. Jacobs Project No. 63PZ0234. Client Number.

Specification for: Merck. Project: Caustic Tank. Elkton, VA. Title PIPING SPECIFICATIONS. Jacobs Project No. 63PZ0234. Client Number. Specification for: Merck Project: Caustic Tank Elkton, VA Document No: 63PZ0234-B-SP-15101SP101S Title PIPING SPECIFICATIONS Jacobs Project No. 63PZ0234 Client Number. Jacobs Discipline Lead Jacobs Project

More information

BALL VALVE DATA SHEET NO. 01 (150#)

BALL VALVE DATA SHEET NO. 01 (150#) BALL VALVE DATA SHEET NO. 01 (150#) VALVE CODE BF101 VALVE TYPE Double Flanged Full Port BODY MATERIAL CARBON STEEL TO ASTM A 216 Gr. WCB CLASS 150# DESIGN STANDARD ISO 17292 SIZE 1/2" TO 1 1/2" 2" TO

More information

88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES

88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.

More information

We Are the Worldwide Provider for All Your Valve and Fitting Needs

We Are the Worldwide Provider for All Your Valve and Fitting Needs Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for

More information

Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve -

Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve - Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing

More information

L&T VALVES BUSINESS GROUP A

L&T VALVES BUSINESS GROUP A Larsen & Toubro Limited (L&T) is a US $ 5 billion engineering and construction company, with a strong presence in manufacturing, services and Information Technology. L&T was founded in 1938 by two Danish

More information

We Are the Worldwide Provider for All Your Valve and Fitting Needs

We Are the Worldwide Provider for All Your Valve and Fitting Needs Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track

More information

87A-200 Series. Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve - 1/2 through 1 STANDARD FEATURES STANDARDS COMPLIANCE

87A-200 Series. Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve - 1/2 through 1 STANDARD FEATURES STANDARDS COMPLIANCE Description (1/2 & 3/4 Valves) 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/ Vinyl Grip 10. Stem Bearing RPTFE

More information

Full Opening Swing CHECK VALVE - API 6D

Full Opening Swing CHECK VALVE - API 6D Full Opening Swing CHECK VALVE - API 6D Table of Contents: Manufacturing Range 3 Features & Benefits 4 Drawings 6 Sizes & Dimensions 8 Pressure / Temperature Reference 14 Flow Coefficients (Cv) 14 How

More information

1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.

1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves. Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product

More information

FLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A

FLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A FLANGES & GASKETS Most of the flanges have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below).

More information

- Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN.

- Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN. CARBON STEEL PIPES STAINLESS STEEL PIPES - Seamless pipe, Welded pipe (ERW), Spiral welded pipe. - Seamless pipe, Welded steel pipe - Standard: ASME/JIS/DIN. - Standard: ASME/JIS - Material: ASTM A53/A106

More information

LATEST ARRIVALS CATALOGUE STOCK

LATEST ARRIVALS CATALOGUE STOCK LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL

More information

TECHNICAL DATA. Notes: For use with Trim Charts on Pages 2-4

TECHNICAL DATA. Notes: For use with Trim Charts on Pages 2-4 Page 1 of 5 Model F Dry Valve with Trim Valve Size Part Number 3 13764PTR 4 13765PTR 6 13766PTR Standard Trim Sets include galvanized nipples and fittings. 4 Dry Valve Shown General Notes: Notes: For use

More information

STANDARDS and SPECIFICATIONS

STANDARDS and SPECIFICATIONS ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)

More information

Yl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC

Yl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull

More information

Full Traceability. Material Specification. Raw Material Code. Heat Treatment

Full Traceability. Material Specification. Raw Material Code. Heat Treatment All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification

More information

flowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request

flowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals

More information

Forged Fittings. High Technology Valve & Fitting Series

Forged Fittings. High Technology Valve & Fitting Series Forged Fittings High Technology Valve & Fitting Series Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications

More information

Forged High Pressure Pipe Fittings

Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension

More information

Type B (Extruded Branch) Sizes 4 through 30

Type B (Extruded Branch) Sizes 4 through 30 STOPPLE Fittings & Reduced Branch Split Tees, Sizes 4-inch and Larger Bulletin No: 1100.001.05 Date: July 2008 Cross Indexing No: n/a Supersedes: 1100.001.04 (07/06) Typical Tapping Setup For Plugging

More information

Forged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23

Forged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23 Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar

More information

A GUIDE TO PIPE SIZES

A GUIDE TO PIPE SIZES A GUIDE TO PIPE SIZES Pipe Strengths To identify the dimensions and strengths of different pipe, it is common to use schedule terminology taken from the ANSI pipe schedule chart. The pipe schedule chart

More information

ASME 350 BAR SAE 690 BAR

ASME 350 BAR SAE 690 BAR GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving

More information

One and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index

One and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page

More information

Cast Steel Bolted Cover Swing Check Valves Sizes: 2 thru 24 Pressure Class: 150 thru 1500

Cast Steel Bolted Cover Swing Check Valves Sizes: 2 thru 24 Pressure Class: 150 thru 1500 Cast Steel olted Cover Swing Check Valves s: 2 thru 24 Pressure Class: 150 thru 1500 Manufactured by Newmans 33 Newco Cast Carbon Steel olted onnet Valves Typical Newco Cast Steel olted Cover Swing Check

More information

15100 VALVES. E. Section Building Automation and Control System Guidelines

15100 VALVES. E. Section Building Automation and Control System Guidelines 15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955

More information

PIPES, PIPE FITTINGS VALVES & FLANGES

PIPES, PIPE FITTINGS VALVES & FLANGES PIPES, PIPE FITTINGS VALVES & FLANGES 2 About the Company Atlas Commercial Company (Kwt.) W.L.L was established in 1962, and is part of the Boodai group of companies. Atlas is one of the oldest companies

More information

KVC VALVES AND PEX FITTINGS

KVC VALVES AND PEX FITTINGS KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (

More information

C&N Industrial Group Limited. Better Pipeline, Better Connection.

C&N Industrial Group Limited. Better Pipeline, Better Connection. C&N Industrial Group Limited Better Pipeline, Better Connection. About C&N Flange & Fitting producing Steel pipe expand & Welding Pipe accessories(jiangsu) Pipeline technology consult Incorporate on C&N

More information

Direct Mount Packages

Direct Mount Packages 800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated

More information

ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES

ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)

More information

VALVES SHOP.CHEMOILPRODUCTS.COM SHOP.CHEMOILPRODUCTS.

VALVES SHOP.CHEMOILPRODUCTS.COM SHOP.CHEMOILPRODUCTS. VALVES FITTINGS & STAINLESS STEEL BALL VALVES CAMLOCKS SPECIFICATIONS: ALUMINUM, SS, BRASS, & D. I. GRAVITY CASTING A-A-59326 STANDARDS NBR SEAT MATERIAL 50 PSI TO 250 PSI SIZE 3/4 TO 8 TYPE B F COUPLER

More information

A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED. Gate, Globe & Check Valves.

A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED. Gate, Globe & Check Valves. A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED Gate, Globe & Check Valves. VALVITALIA VITAS DIVISION PLANT Some production example of Forged Steel Valves 2 Valves

More information

CAST IRON FITTINGS STANDARD

CAST IRON FITTINGS STANDARD 060-1 CAST IRON FITTINGS STANDARD ITEM 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 90 ELL 11.03 15.95 6.99 7.29 8.62 12.24 16.93 26.45 90 REDUCING ELL * 22.20 14.69 12.27 15.44 31.19 41.74 45 ELL 13.59 14.60

More information

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963 800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300

More information

Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526

Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 Pressure Reducing, Back Pressure and Differential Pressure Control 2 GE Oil

More information

STOPPLE Plus Fittings

STOPPLE Plus Fittings STOPPLE Plus Fittings Sizes: 4- Through 36-inch Bulletin No: 1100.007.02 Version: 08.2014 Cross Indexing No: n/a Supercedes: 1100.007.01 (06.2014) Offset in closeup Options Description STOPPLE Plus fittings

More information

CAFS Air Compressor Service Parts List Models 100-D, 120-D, 150-D, 200-D

CAFS Air Compressor Service Parts List Models 100-D, 120-D, 150-D, 200-D Document Number Issue Date 3/18/15 Rev. Date 1/24/18 CAFS Air Compressor Service Parts List Models 100-D, 120-D, 150-D, 200-D Pump Models HL200K, HL300K, HL400K Index: See Pages Component Model 100-D,

More information

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the

More information

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product

More information

MODEL NUMBER - VALVE SELECTION CODES

MODEL NUMBER - VALVE SELECTION CODES Threaded Valves Model Selection Page: 1 S85 S51 1 08-3 - R - R - L 05 - B - T - T - L - 3-4 - 5-6 S0 S80 S70 S51 1 Type S0FS S85 S90 HP6000 S40 HX10000 01 1/4" 05 1" 09-1/" Size 0 3/8" 06 1-1/4" 10 3"

More information

PARTS BOOK TRIPLEX MUD PUMP WS-1300T

PARTS BOOK TRIPLEX MUD PUMP WS-1300T PARTS BOOK TRIPLEX MUD PUMP WS-1300T White Star Pump Co. 22718 Commercial Lane, Tomball, Texas 77375 2010 For parts and service contact White Star sales office 22718 Commercial Lane, Tomball, Texas 77375

More information

Forged 3 Piece Trunnion Mounted Ball Valves Series PL

Forged 3 Piece Trunnion Mounted Ball Valves Series PL Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece

More information

DK-LOK Hydraulic Pipe Fittings

DK-LOK Hydraulic Pipe Fittings Class 2000, 3000, 6000, 9000 fittings Catalog No. C-2 June 2012 DK-LOK Hydraulic Pipe Fittings are designed and manufactured to the following standards. ASME B 16.11-2005: Forged fittings, Socket-welding

More information

505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial

505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial 505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F

More information

KO Series. Cast Steel Gate Valves

KO Series. Cast Steel Gate Valves FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed

More information

Accutubes. Accuracy True double averaging design +1% of rate accuracy +0.1% repeatability Tested and certified by independent flow labs

Accutubes. Accuracy True double averaging design +1% of rate accuracy +0.1% repeatability Tested and certified by independent flow labs s Meriam s Flow Sensors are lab-tested and field-proven flow elements perfect for gas, liquid or steam service. With thousands in use worldwide, the continues to be the right choice when ease of installation,

More information

62 Series See Commercial Price List [CPPL9000] Carbon Steel Ball Valves

62 Series See Commercial Price List [CPPL9000] Carbon Steel Ball Valves Table of Contents Bronze Ball Valves 3 Series See Commercial Price List [CPPL9000] 70 Series...4-5 71 Series...5 75 Series...6 77 Series...7-8 77C Series...8-9 77W Series See Commercial Price List [CPPL9000]

More information

Control Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM

Control Valve. 3-Piece 30, 60, or 1/8 Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM 324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for

More information

Cast Steel Valves. General Index. Figure Number Index JENKINS -1-

Cast Steel Valves. General Index. Figure Number Index JENKINS -1- Cast Valves Cast Valves SINCE 1864 General Index General Data... 2 Materials... 2 Identification... 3 Gate Valve Features... 4, 5 Globe Valve Features... 9, 10 Swing Check Valve Features... 14, 15 Pressure/Temperature

More information

Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES

Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that

More information

WENZHOU BAIJI VALVE CO.,LTD

WENZHOU BAIJI VALVE CO.,LTD API valves Cataloge 2006 All rights reserved by Wenzhou Baiji Valve Co.,Ltd CN. API 600 CAST STEEL VALVES COMPANY INTRODUCTION Wenzhou Baiji Valve Co.,LTD. BJ VALVES, is a diversified global supplier of

More information

PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION

PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes

More information

K-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180

K-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180 SERIES 180 R180/R180F Reduced Bore Design F180/F180F Full Bore Design FEATURES Ball valve designs with screwed or weld end connections. ISO 5211 top mounting plate for easy actuation. Investment cast body

More information

SOFT SEATED TRUNNION MOUNTED BALL VALVES CSTS SERIES

SOFT SEATED TRUNNION MOUNTED BALL VALVES CSTS SERIES CSTS SERIES Quality equates to the sum of Applied Science Serving the most rugged applications in the Western Canadian Sedimentary Basin Brochure CSTS Series February 2016 CSC Valves Canada Inc. operates

More information

Bolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series

Bolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series Cast Steel Bolted Bonnet Valves (BL Series) Gate Valve - BL5 Series Gate Valve Features Globe Valve - BL6 Series Globe Valve Features Swing Check Valve - BL7 Series Optional Features Model Numbers GATE

More information

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the

More information

PBV. Threaded and Socketweld Ball Valves P.B.V.

PBV. Threaded and Socketweld Ball Valves P.B.V. PBV Threaded and Socketweld Ball Valves P.B.V. TABLE OF CONTENTS Overview...3 How to Identify PBV-USA Valves...4 Seat Materials...5 Materials/Parts/Dimensions/Weights Master Star - 5333/6333...6 Superstar

More information

HVAC Products 2016 EDITION NCI CANADA INC.

HVAC Products 2016 EDITION NCI CANADA INC. HVAC Products 2016 EDITION NCI CANADA INC. YOUR SINGLE SOURCE SOLUTION NCI Canada Inc. is a Canadian National master distributor of high quality valves, fittings, pipes and related products serving residential,

More information

A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.

A. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems. SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing

More information

6. Butterfly Valves & Accessories

6. Butterfly Valves & Accessories 1. Plastic Pipes 2. Steel Pipes 3. Penetration Tubes 4. Piping Accessories 5. Needle Valves 6. Butterfly Valves & Accessories 7. Miscellaneous Valves 7 1. PLASTIC PIPES TYPES OF PLASTIC PIPES ADAPTATOR

More information

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.

More information

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List Industrial Bronze and Iron Price List IND-0718 Effective: July 2, 2018 Revised: 09/24/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product

More information

CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.

CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES. CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon

More information

GWC Italia. Proven technology for individual valve solutions worldwide FSV-1005

GWC Italia. Proven technology for individual valve solutions worldwide FSV-1005 GWC Italia Proven technology for individual valve solutions worldwide forged STEEL VALVES GATE, GLOBE & CHECK FSV-1005 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w w. g w

More information

HANCOCK 600 GATE, GLOBE AND CHECK VALVES FORGED STEEL

HANCOCK 600 GATE, GLOBE AND CHECK VALVES FORGED STEEL HANCOCK 600 GATE, GLOBE AND CHECK VALVES A range of ASME class 800 and 1500 reduced bore forged steel valves with screwed, socket weld, butt weld or flanged ends GATE VALVES A compact but extremely sturdy

More information

TRUNNION BALL VALVES. TBV 7.10

TRUNNION BALL VALVES.     TBV 7.10 TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in

More information

Bore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face

Bore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt

More information

Totaiyo Steel Industry トタイヨ 鉄鋼業界. Manufacturers of Pipe Fittings

Totaiyo Steel Industry トタイヨ 鉄鋼業界. Manufacturers of Pipe Fittings Y IS R QUALIT AS O D 'S RE G TE L LY S U RA NC E ISO Totaiyo Steel Industry トタイヨ 鉄鋼業界 Manufacturers of Pipe Fittings 900 PROFILE The Company TOTAIYO is the brand name of the flange, fittings manufacturing

More information

Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve

Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting

More information

Cast Steel Valves. Contents Contents. Figure Number Index. Figure Number Cross Reference. Valve Type Class Stockham Jenkins

Cast Steel Valves. Contents Contents. Figure Number Index. Figure Number Cross Reference. Valve Type Class Stockham Jenkins Stockham Cast Valves Cast Valves Contents Contents Performance in Any Application...4 How to Specify and Order Valves...4 Installation, Marking and Identification...5 Gate Valves...6 Globe Valves...11

More information

* Contact your sales representative for compliance to NACE MR or later requirements.

* Contact your sales representative for compliance to NACE MR or later requirements. VALVES & CONTROLS crosby SERIES 800, 900 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 800 adjustable blowdown, Series 900 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have

More information

MILITARY STANDARD SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS

MILITARY STANDARD SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS NOTICE OF CHANGE INCH-POUND ) 8 July 2002 MILITARY STANDARD SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS TO ALL HOLDERS OF : 1. THE FOLLOWING PAGES OF

More information

Ball Valves. Quality Valves at Low Cost

Ball Valves. Quality Valves at Low Cost Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct

More information

LATEST PRICE LISTS PIPES & TUBES FITTINGS VALVES CONTACT DETAILS: AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD.

LATEST PRICE LISTS PIPES & TUBES FITTINGS VALVES CONTACT DETAILS: AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD. LATEST PRICE LISTS 2017 PIPES & TUBES AUTHORISED DISTRIBUTORS of: JINDAL PIPES LTD. MAHARASHTRA SEAMLESS LTD. SANT INDUSTRIAL VALVES FITTINGS VS FORGED FITTINGS C BRAND ISI APPROVED G.I. FITTINGS VALVES

More information

TY-FLO 3 Piece Ball Valves

TY-FLO 3 Piece Ball Valves OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular

More information

ECOLINE GTC Type Series Booklet

ECOLINE GTC Type Series Booklet Gate Valve ECOLINE GTC 150-600 Class 150-600 NPS 2''-36'' Cast Steel / Stainless Steel Bolted Bonnet Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet ECOLINE GTC 150-600

More information

Eclipse ES Air Compressor and Drive Service Parts List (Models ECL-200 and ECL-400)

Eclipse ES Air Compressor and Drive Service Parts List (Models ECL-200 and ECL-400) Eclipse ES Air Compressor and Drive Service Parts List (Models ECL-200 and ECL-400) Document Number Index: Issue Date 02/19/14 See Page Rev. Date 1/24/18 Clutch Compressor Air Circuit Tubing Component

More information

PETRO VALVES. Gate Globe Check VALVE CATALOGUE. Subsidiary of Petro Power UK

PETRO VALVES. Gate Globe Check VALVE CATALOGUE. Subsidiary of Petro Power UK PETRO VALVES Gate Globe Check VALVE CATALOGUE Subsidiary of Petro Power UK 2 PETRO VALVES The company 4 GATE VALVES BOLTED BONNET from Class 150 up to Class 2500 from 2 up to 36 PRESSURE SEAL from Class

More information

F20 Series Ball Valve Index

F20 Series Ball Valve Index F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For

More information

The PL Series Pressure Air Release Valves. Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger. Crispin.

The PL Series Pressure Air Release Valves. Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger. Crispin. The PL Series Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger Crispin Since 1905 PL SERIES Functio n Allows air and/or gas to be released from a pressurized liquid system

More information

Crosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control

Crosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features

More information

MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of

MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing

More information

Section 25 Project Surplus Packages - Sales Item

Section 25 Project Surplus Packages - Sales Item Section 25 Project Surplus Packages - Sales Item 25010112 Project Unused Surplus Package. Valves, Pipe and Various Pipe Fittings in Carbon and Stainless Steel. All Certification available. Stored in Bulgaria

More information

Corporate Overview... 2,3. How To Order Gate Valves Globe Valves Check Valves Cryogenic Valves...

Corporate Overview... 2,3. How To Order Gate Valves Globe Valves Check Valves Cryogenic Valves... FORGED STEEL VALVES Table Of Contents Corporate Overview... 2,3 How To Order... 4-8 Gate Valves... 9-14 Globe Valves... 15-22 Check Valves... 23-30 Cryogenic Valves... 31-40 Integral Flanged Valves...

More information

Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper

More information

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List Industrial Bronze and Iron Price List TABLE OF CONTENTS IBI-1017 Effective: October 2, 2017 Revised: 12/07/2017 Suggested list prices are subject to change without notification. Visit our Website for the

More information

Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL

Discharge diameters 1.5, 2, 3, 4, 5, 6, 8, 10, 12 & 14 HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft

More information

SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES

SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES

More information

GWC Italia. Proven technology for individual valve solutions worldwide API 6D SWING CHECK VALVES SC-1002

GWC Italia. Proven technology for individual valve solutions worldwide API 6D SWING CHECK VALVES SC-1002 GWC Italia Proven technology for individual valve solutions worldwide API 6D SWING CHECK VALVES SC-1002 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide Network

More information