Berkeley Cast Iron Impeller B6EXQBH SAE ENGINE MOUNT. Flanged Case, Packing Construction. Table I. Page Date March 4, 2013 Supersedes 01/01/04
|
|
- Cornelius Wilkins
- 5 years ago
- Views:
Transcription
1 BEXQBH Page ( X scale ) 3 3 5A 8 B/M Mtg. Spline B00 H05398 H053 -/-0T 3" Kit available for this model, P/N B9. Refer to Supplement-C of this section for list of components included with kit. 5B 80A 80A 80B 80B components, refer to page.3 80 Case, Volute H0509 Impeller L048 See Ring, Wearing S Ring, Packing (Set of 4) S343 4 Sleeve, S003 Bearing, Ball S49 Gland, Packing B843 8 Bearing, Ball M Lock, Impeller S089 9 Ring, Lantern S998 Key, 3/8 x " S Outer Bearing Cap L059 Slinger, Water M098 5A Seal, Oil M00 5B Seal, Oil S See 3 Gasket S95 O-Ring S4444 Capscrew, Hex 5/8-x-/"( Req.) S999 Capscrew, Hex /-4x" ( Req.) S88 Capscrew, Hex 3/8-x" (4 Req.) S8 80A Stud, 3/4-0x-3/4" (4 Req.) S80 80B Stud, /-3x3-3/4" ( Req.) S05 80A Nut, Hex 3/4-0 (4 Req.) S3 80B Nut, Hex /-3x/" ( Req.) S Plug, Pipe / NPT (4 Req.) S3 Fitting, Grease (3 Req.) S30 8 Elbow, Street 90 S5 83 Nipple, Pipe S Coupling, Pipe S4 Cover, Case Back H WRIGHT STREET, DELAVAN, WI PH: ORDERS FAX:
2 BEXQBH Page ( X scale ) 3 3 5A 8 B/M Mtg. Spline B0 H05399 H0588 -/-0T 3" B0 3 H050 H0588 -/-0T 3" 5B 80A 80A 80B 80B components, refer to page.3 80 Case, Volute H0509 Impeller L048 See Ring, Wearing ( Req.) S Ring, Packing (Set of 4) S Sleeve, S003 Bearing, Ball S49 Gland, Packing B843 8 Bearing, Ball M Lock, Impeller S089 9 Ring, Lantern S998 Key, 3/8 x " S Outer Bearing Cap L059 Slinger, Water M098 5A Seal, Oil M00 5B Seal, Oil S See 3 Gasket S95 O-Ring S4444 Capscrew, Hex 5/8-x-/"( Req.) S999 Capscrew, Hex 3/8-x-/4"( Req.) S88 Capscrew, Hex 3/8-x" (4 Req.) S8 80A Stud, 3/4-0x-3/4" (4 Req.) S80 80B Stud, /-3x3-3/4" ( Req.) S05 80A Nut, Hex 3/4-0 (4 Req.) S3 80B Nut, Hex /-3x/" ( Req.) S Plug, Pipe / NPT (4 Req.) S3 Fitting, Grease (3 Req.) S30 8 Elbow, Street 90 S5 83 Nipple, Pipe S Coupling, Pipe S4 Cover, Case Back H WRIGHT STREET, DELAVAN, WI PH: ORDERS FAX:
3 BEXQBH Silicon Bronze Impeller Page ( X scale ) 3 3 5A 8 B/M Mtg. Spline B499 H0535 H053 -/-0T 3" B49 3 H053 H053 -/-0T 3" 5B 80A 80A 80B 80B components, refer to page.3 80 Case, Volute H0509 Impeller L048 See Ring, Wearing ( Req.) S Ring, Packing (Set of 4) S Sleeve, S003 Bearing, Ball S49 Gland, Packing M084 8 Bearing, Ball M Lock, Impeller S089 9 Ring, Lantern S998 Key, 3/8 x S Outer Bearing Cap L059 Slinger, Water M098 5A Seal, Oil M00 5B Seal, Oil S See 3 Gasket S95 O-Ring S4444 Capscrew, Hex 5/8-x-/ ( Req.) S999 Capscrew, Hex 3/8-x"( Req.) S834 Capscrew, Hex 3/8-x" (4 Req.) S8 80A Stud, 3/4-0x-3/4" (4 Req.) S80 80B Stud, /-3x3-3/4" ( Req.) S05 80A Nut, Hex 3/4-0 (4 Req.) S3 80B Nut, Hex /-3 ( Req.) S Plug, Pipe / NPT (4 Req.) S3 Fitting, Grease (3 Req.) S30 8 Elbow, Street 90 S5 83 Nipple, Pipe S Coupling, Pipe S4 Cover, Case Back H WRIGHT STREET, DELAVAN, WI PH: ORDERS FAX:
4 BEXQ Page.3 External Balance Line Components A B Gasket, Reducer to Pump S Capscrew, Hex 3/4-0x-/4" S330 8 Elbow, 90 U8-0GP 83 Nipple, Pipe "x5" Q Union, Pipe M03 80 Connector, Tube M005 8A Tubing, LH L04 8B Tubing, RH L09 83 Reducer, Eccentric L00 External Balance Line components are found on the following pumps: B/M Model Mounting B59 BEXQBL B598 BEXQBL B49 BEXQBL B599 BEXQBL 3 B493 BEXQBL 3 B00 BEXQBH B0 BEXQBH B0 BEXQBH 3 93 WRIGHT STREET, DELAVAN, WI PH: ORDERS FAX:
5 BEXQBHS Flanged Case, Mechanical Construction Page.4 800D B 3 8 B/M Mtg. Spline B09 H0338 M035 -/-0T 3" B8530 H034 M035 -/-0T 3" Kit available for this model, P/N B884. Refer to Supplement-C of this section for list of components included with kit. A Truarc 80 Case, Volute H0509 Impeller L05805 See Ring, Wearing S Sleeve, ( Req.) S9499 Bearing, Ball S950 8 Bearing, Ball S833 Locknut, Bearing S Locknut, Impeller M04 Key, / x " S545 3 Bearing Cap M09 5 Seal, Oil S950 See 3 Gasket, Balance Ring S Seal, Mechanical S300 5 Ring, Balance M043 O-Ring S4444 Capscrew, Hex 5/8-x-/"( Req.) S999 Capscrew, Hex /-4x-/4" ( Req. ) S84 Capscrew, Hex 3/8-x-/4" ( Req. ) S88 Capscrew, Hex 3/8-x" (4 Req.) S8 800D Capscrew, Hex 3/8-x/8" (4 Req.) S85 80 Plug, Pipe / NPT (4 Req.) S3 A Fitting, Grease Drive Type S30 B Fitting, Grease S30 8 Ring, Retaining S83 93 WRIGHT STREET, DELAVAN, WI PH: ORDERS FAX:
B/M No. Shaft Kit available for this model, P/N B Refer to Supplement-C of this section for list of components included with kit.
BJQBM Page 0. Date March 4, 03 Supersedes 0/0/04 8B 3 3C 8 B/M Mtg. Spline B0 H0598 M083 -/-0T 3" B08 H059 M083 -/-0T 3" B08 3 H059 M083 -/-0T 3" B08 4 H0595 M083 -/-0T 3" Kit available for this model,
More informationBerkeley Cast Iron Impeller B4JPBH ELECTRIC MOTOR DRIVE. Flanged Case, Packing Construction. Table I. Table II
B4JPBH Flanged Case, Packing Construction Page 0. Date March 4, 03 Supersedes 0/0/04 80B 80B 3 See Supplement B 8 4 B/M HP PH RPM "U" Dim. Imp. Dia. Imp. B588 0 3 800 -/4" 0.06" L0680 B5883 5 3 800 -/4"
More informationBerkeley Cast Iron Impeller B6ZPL ELECTRIC MOTOR DRIVE. Flanged Case, Packing Construction. Table I. Table II
B6ZPL Flanged Case, Packing Construction Page 350. 80B 80B 3 B509 0 -/4" 6."x8.5" M078 B5 0 3 -/4" 6."x8.5" M078 B548 5 3 -/4" 7.56"x8.56" M079 B54 0 3 -/4" 8.00"x9.00" M04348 7 80A 80A 6 Case, Volute
More informationB/M No. B H00925 M /8-10T 3" B H00920 M /8-10T 2-1/2" Part Number. Item. No. 800B
Threaded Case (NPT), Packing Construction Page 80. Supersedes 03/0/ 87 8 B/M Mtg. Bracket Spline Ext. B00 4 H0095 M0454-3/8-0T 3" B5999 5 H0090 M07-3/8-0T -/" 7 Kit available for this model, P/N B778 for
More informationBerkeley Cast Iron Impeller B1-1/2ZPH ELECTRIC MOTOR DRIVE. Threaded Case (NPT), Packing Construction. Table I. Table II
Cast Iron Impeller B-/ZPH Threaded Case (NPT), Packing Construction Page 50. Date March 4, 03 Supersedes 07/0/ 3 B/M HP PH RPM "U" Dim. Imp. Dia. Imp. B53759 5 3 3600 -/4" 7.94" M07666 B596 0 3 3600 -/4"
More informationBearing Frame Mount CAST IRON IMPELLER B4EYRMBM TYPE B SINGLE STAGE CENTRIFUGAL PUMP TABLE I
Page 0. Date November, 009 B4EYRMBM Packing Construction 3 8 B/M No. Rotation Case Diameter B50 CW M5 L09.88 80 A 3 See Supplement B 9 3 See Table I Shaft (Not sold separately) See Note 9 Cover, Suction
More informationModel B1-1/2XQBS-11. Model B1-1/2XQBS-18. Model B1-1/2XQBS-26
OWNER S MANUAL Engine Driven High Pressure Pump Model B1-1/2XQBS-11 Model B1-1/2XQBS-18 Model B1-1/2XQBS-26 293 WRIGHT STREET, DELAVAN, WI 53115 WWW.BERKELEYPUMPS.COM PH: 888-237-5353 269 Trillium Drive,
More informationCENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced
More informationCENTRIFUGAL PUMPS 7.5" FRAME MOUNT SERIES FEATURES
FEATURES Volute: Ductile iron volute for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
More informationCENTRIFUGAL PUMPS CLOSE-COUPLED 7.5" FEATURES
FEATURES Volute: Ductile iron for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
More informationFeatures: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
More informationCENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES
FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics
More informationHN series. cast iron shallow well jet pumps. 1/2 thru 1 HP
cast iron shallow well jet pumps HN series / thru HP 0 Nozzle Cleanout Port A B 0 Key No. HNC-L HND-L HNE-L No. Part Description Used / HP / HP HP Motor A0CHL A0DHL A0EHL Capscrew /-x-/ Lg. Hex Hd. U0-ZP
More informationService Bulletin No. 2874
MODEL TYPE SECTION/GROUP DATE SUBJECT 102 E / E4500 / J4500 Series Coaches Service Information 04--Brakes MERITOR BRAKE CALIPER SERVICE PARTS CHART Dec. 24, 2003 CONDITIONS may be purchased from MCI Service,
More information900 SERIES SPLIT CASE FIRE PUMP REPAIR PARTS INDEX
900 SERIES SPLIT CASE FIRE PUMP REPAIR PARTS INDEX Read and understand the pump and motor instructions before attempting to install, disassemble or repair the pump. Part # AF-03-326 2015 Pentair Ltd. 01/30/15
More informationCM Body Assembly Service Parts List CM 93 and CM 04 Body Styles
Document Number Issue Date 12/01/93 Rev. Date 5/11/18 CM Body Assembly Service Parts List CM 93 and CM 04 Body Styles Body Style Identification Pump Material Body Style Pumps Built After 2004 Pumps Built
More informationCL Series Impeller Shaft Assembly Service Parts List
Document Number Issue Date 08/91 Rev. Date 10/17/11 CL Series Impeller Shaft Assembly Service Parts List Index: See Pages Pump Model Component Mechanical Seal Packing Heater Jacket Option Previous Seal
More informationDI PUMP PARTS PRICE LIST
ITEM 1 2 2A PUMP 5040 Pump Body, 1-1/2" NPT Mech. Seal 1 40058 1 5040 Pump Body, 1-1/2" NPT, Packing 1 40057 1 5040 Pump Body, 1-1/2" 150# Flg., Mech. Seal 1 40787 1 5040 Pump Body, 1-1/2" 150# Flg., Packing
More informationReplacement Parts List FI 4009 & FI 4009C. SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016
A Taco Family Company Replacement Parts List FI 4009 & FI 4009C 304-403 SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016 WHEN SELECTING AND ORDERING PARTS, ALWAYS REFER TO SERIAL ON NAMEPLATE 00
More informationSeries 8150 Replacement Parts for 8150 Series Fire Pumps PARTS LIST CP-608B-PL
Series 8150 Replacement Parts for 8150 Series Fire Pumps PARTS LIST CP-608B-PL SERIES 8150 CROSS SECTION 0-952-3 0-952-4 0-952-5 2-904-2 0-952-2 0-952-1 0-952-6 2-001-0 2-916-1 2-904-1 2-123-5 0-905-0
More informationS Series PACER Pumps. PACER Pumps 5/91 Page 1 of 5. Dultmeier Sales for Omaha, NE or for Davenport, IA
PACER Pumps 5/91 Page 1 of 5 Item# Part No. Description Qty. 4 58-0721 NUT, BODY, Plated steel, 1/4-20 Hex... 10 58-0721 10 NUT, BODY, Stainless steel, 1/4-20 Hex... 10 6 58-0703 30 Bracket, polyester...
More informationDI DI PUMP PARTS PRICE LIST
ITEM 1 2 2A 5050 Pump Body, 2" NPT Mech. Seal 1 40091 1 5050 Pump Body, 2" 150# RF Flg. Mech. Seal 1 40791 1 5050 Pump Body, 2" NPT, Packing 1 40088 1 5050 Pump Body, 2" 150# RF Flg., Packing 1 40793 1
More informationReplacement Parts List FI 1509 & FI 1509C. SUPERSEDES: September 21, 2016 EFFECTIVE: March 20, 2017
Replacement Parts List 304-364 FI 1509 & FI 1509C SUPERSEDES: September 21, 2016 EFFECTIVE: March 20, 2017 FI 1509 FI 1509C FI 1509C REQUIRED BEARING FRAME J BEARING FRAME H BEARING FRAME J 1 1 Impeller
More informationCENTRIFUGAL PUMPS 13" CLOSE-COUPLED FEATURES
FEATURES Volute: Cast iron for heavy-duty service; back pull-out design; can be rotated for ease of installation; split volutes for reduction in radial bearing load (6 x 8-13 and 8 x 10-13) Impeller: Enclosed
More informationEND SUCTION PUMP WITH INTEGRATED VARIABLE FREQUENCY DRIVE REPLACEMENT PARTS GUIDE
TYPE LFE LFE END SUCTION PUMP WITH INTEGRATED VARIABLE FREQUENCY DRIVE REPLACEMENT PARTS GUIDE This guide is valid for all Grundfos CBS Inc. products beginning with product code 21. Grundfos CBS Inc. End
More informationPage 1 of 7 Section 05-03A: Axle, Front Drive, Dana Models 44 and 50 1996 Bronco/F-Series Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 06/19/2000 Hubs, Automatic Lock Refer to Section
More informationMulching and Finishing Mowers MP and FP
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)
More informationPARTS LIST SERIES 5240
File No. 6052.123 Date: January 6, 2003 Supersedes: 6052.123 Date: June 1, 1996 SUMP PUMP FOR PUMPS SERIAL NUMBER 71854 AND LATER NEW DESIGN 5240 SUMP PUMP PARTS IDENTIFICATION ITEM DESCRIPTION PAGE ITEM
More information4A200T-E080 VALVE, ROCKER ARM GROUP
A00T-E00 VALVE, ROCKER ARM GROUP - - REF. NO 0 PART. NO E60- DESCRIPTION VALVE, INLET DK55 DK55-AU DK55-EU Q TY DK55-EN DK55C DK55C-AU DK55C-EU DK55C-EN I.C REMARK 0 E6500- VALVE, EXHAUST 0 5-- SPRING,
More informationPARTS MAN UAL SDA-1200 STEER ABLE DRIVE AXLE SDA-1400 STEER ABLE DRIVE AXLE SDA-1600 STEER ABLE DRIVE AXLE
PARTS MAN UAL SDA-1200 STEER ABLE DRIVE AXLE SDA-1400 STEER ABLE DRIVE AXLE SDA-1600 STEER ABLE DRIVE AXLE WITH EX TENDED SERV ICE BRAKES AND ABS PRO VI SIONS Fabco Automotive Corporation, Livermore, CA
More informationFI 3009, FI 3009C & FI 3009D
Replacement Parts List 304-486 FI 3009, FI 3009C & FI 3009D SUPERSEDES: June 1, 2013 EFFECTIVE: December 31, 2018 REQUIRED DESCRIPTION FI 3009 FI 3009C FI 3009D BEARING FRAME J BEARING FRAME J BEARING
More informationCENTRIFUGAL PUMPS HYDRAULIC DRIVEN 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; double keyed for improved reliability
More informationParts list. See Frame parts list Page 12. See hydraulic pump. exploded view. Page 14. See work head. exploded view. Page 7
Parts list See Frame parts list Page 12 See hydraulic pump exploded view Page 14 See work head exploded view Page 7 See electrical parts list Page 18 See hoist parts list Page 11 See Frame parts list Page
More informationINSTALLATION AND OPERATING INSTRUCTIONS REPAIR PARTS LIST
owner's manual Hydraulic-Motor Frame Mounted Centrifugal Pump Direct Coupling Drive INSTALLATION AND OPERATING INSTRUCTIONS REPAIR PARTS LIST 3949 0401 IMPORTANT For best possible performance and continuous,
More informationOWNERS MANUAL INSTALLATION AND OPERATING INSTRUCTIONS REPAIR PARTS LIST. Centrifugal Pump Primer MODEL 6D, HAN-DEE PRIMER
OWNERS MANUAL INSTALLATION AND OPERATING INSTRUCTIONS REPAIR PARTS LIST Centrifugal Pump Primer 383 0893 MODEL 6D, HAN-DEE PRIMER IMPORTANT For best possible performance continuous, satisfactory operation,
More informationCentrifugal End Suction Fire Pumps
Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationGENUINE MEGA MEGA WATER PUMPS. 2-1
GENUINE MEGA MEGA WATER PUMPS No pump, no spray. It s that simple. Mega water pumps are not off-the-shelf irrigation pumps designed to run sprinklers; they are the product of over 35 years of experience
More informationCENTRIFUGAL PUMPS WATER TRUCK 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Cast iron enclosed design for high efficiency; double keyed for improved reliability
More informationER TRANSIT PARTS MANUAL. Cooling Section. Page 7-1. Cooling 05/97
Cooling Page 7-1 Plumbing Cummins 6BTA/6BG Page 7-2 Cooling Plumbing Cummins 6BTA/6BG 1 62190751 1 Tube - Coolant, Lower Radiator 2 61190162 3 Clamp - 2 1/16" - 3" 3 61190422 1 Hose - Rubber, Curved 2
More informationBerkeley 8T-550 Submersible Turbine
Berkeley 8T-55 9 3 Nominal RPM: 345 Maximum Working Pressure: 485 PSI 1 8 27 3 HP 9 7 24 25 HP 8 6 21 2 HP 7 5 4 3 18 15 12 9 15 HP 1 HP 6 5 4 3 Efficiency % 2 6 2 1 3 1 1 2 3 4 5 6 7 8.19" (with 6" mtr.)
More informationAxle Components. 12,000 lbs. Capacity
12,000 lbs. Heavy Duty Components 27-358 Unitized Oil Seal - disc or drum (Dimensions are 3.125 x 4.506 x.605) 2 010-056-00 27-342 3984 Inner Bearing (Inside diameter 2.625 ) 3 031-020-02 27-343 3920 Inner
More informationReplacement Parts List FI 4007 & FI 4007D. SUPERSEDES: NEW EFFECTIVE: December 31, 2018
Replacement Parts List 304-572 FI 4007 & FI 4007D SUPERSEDES: NEW EFFECTIVE: December 31, 2018 WHEN SELECTING AND ORDERING PARTS, ALWAYS REFER TO SERIAL ON NAMEPLATE FI 4007 BEARING FRAME J FI 4007D BEARING
More informationRetriever 360G/P. 5/92 revised 2/01 FORM NUMBER
Retriever 360G/P PARTS LIST Advance MODELS 56468470, 56468480 This parts list is for machines after serial number 505073 All models covered in this manual are OBSOLETE 5/92 revised 2/01 FORM NUMBER 56042267
More informationS200-P Passport Series Fire Pump Service Parts List
Document Number Issue Date 04/08/13 Rev. Date 9/24/18 S200-P Passport Series Fire Pump Service Parts List Index: Component See Pages Body and Impeller 2, 3 Pedestal and Primers 4, 5 Cross Section Views
More informationSeries e-1510 REPLACEMENT PARTS FOR STANDARD DESIGN PUMPS PARTS LIST CP-208G-PL
Series e-1510 REPLACEMENT PARTS FOR STANDARD DESIGN PUMPS PARTS LIST CP-208G-PL PARTS LIST CP-208G-PL SERIES e-1510 Index Nameplate Data.................................................. Exploded Views...................................................
More informationPB18 Series Portable Pump Assembly Service Parts List
Document Number Issue Date 09/20/94 Rev. Date 02/02/12 PB18 Series Portable Pump Assembly Service Parts List Index: Component Pump Model (Located on Pump Serial Plate) See Page PB18-2515, PB18-2515B 2,
More informationTO REPLACE A MECHANICAL SEAL Select the correct Seal Kit, which contains all gaskets and impeller hardware. Shaft sleeve inspection is suggested.
END SUCTION PUMPS REPLACEMENT PARTS GUIDE TYPE LC, LF, LCV This guide is valid for all Grundfos CBS products beginning with product codes 10, 11 and 20. See back cover for explanation and identification.
More informationINSTA-CHAIN 2009 CATALOG
2009 CATALOG INTRODUCTION INSTA-CHAIN Welcome to the Insta-Chain catalog and thank you for your interest in our product. We would like you to make note of the following items as they may have changed or
More informationACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
More informationPARTS MANUAL SECTION. Models 295, 296, 297, 1297 ROTARY MOWER
0 Series Models,,, ROTARY MOWER Published 0/ PARTS MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and
More informationSpare Parts Manual. Single Screw Extruder BASF. Spare Parts Manual BASF rev
Spare Parts Manual Single Screw Extruder BASF Spare Parts Manual BASF rev 09--08 Contents Screw Elements... Barrel assemblies...8 Clamps... Barrel end section... 5 Cutter...5 6 Shaft...9 7 Control Arm...
More informationA.O. Smith Water Heater Parts Fulfillment 125 Southeast Parkway, Franklin, TN
WIRING/HARNESS & PROBES See page 12 PROPANE GAS TRAIN ASSEMBLY See pages 8-10 COMMERCIAL POWER BURNER BOILER REPLACEMENT PARTS LIST COPPER BOILERS FOR HYDRONIC HEATING & HOT WATER SUPPLY LEGEND MODELS
More informationFORD - Cyl Block and Related Parts
FORD - Cyl Block and Related Parts Ref Description Qty All 302 Qty 351 Qty 351-HP 1 BLOCK ASSEMBLY 1 59-4046 1 59-4047 1 59-4047 2 PLUG - 1½ CUP - BRASS 6 59-4048 6 59-4048 6 59-4048 3 PLUG - OIL PASSAGE
More informationLime Spreader. Model SL10. Illustrated Parts Breakdown. Hydraulic System Hydraulic Manifold. Twin Speed Reducer
Lime Spreader Model SL0 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Front End Hydraulic System Hydraulic Manifold Switch Box Floor & Apron Axle Assembly Apron Drive
More informationCP-506B-PL. Series HSCS. Horizontal Split Case Pumps. Replacement Parts
Series HSCS Horizontal Split Case Pumps Replacement Parts PARTS List CP-506B-PL PARTS LIST CP-505-PL Index Description Page No. Exploded View....3 Parts List for 6x10x22, 8x12x22M, 8x12x22L, 8x12x27, and
More informationPARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INEX - Parts Page rawing page 2 - Fluid End etail page 3 - Piston & Liner etail page 4 - Parts List page 5-10 upagro B.V. 1/10 KA-126FE KA-34 KA-38 KT-34 KA-35 upagro
More informationGear Products Inc N. 161st E. Ave. Tulsa, OK Phone (918) Fax (918)
SERVICE MANUAL Disassembly & Assembly Procedures Worm Gear Swing Drive 003 Series Gear Products Inc. 1111 N. 161st E. Ave. Tulsa, OK 74116 Phone (918) 234-3044 Fax (918) 234-3455 Worm Gear Swing Drive
More informationPARTS MANUAL KP-3300PT PISTON TYPE PUMP
PARTS MANUAL KP-3300PT PISTON TYPE PUMP INEX - Parts Page rawing page 4 - Fluid End etails & KP-245-250 Piston etail page 5 - KP-245-275R & KP-245-300 Piston etail page 6 - KP-190/160-A Water/Oil Manifold
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 3414 SECTION: 67
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL July, 0 ROTARY
More informationReproduction. Not for. Mid Frame Dual Stage Snowthrower. Parts Manual
Parts Manual Attachment Mfg. No. Description 1695994 (I924EX), 9TP 24" Snowthrower (CE/Export) Mid Frame Dual Stage Snowthrower Not for Reproduction Manual Part No. Revision - Rev. Date: 7/20/2011 Table
More informationNC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
More informationParts for Fig. 4565, 4566 & 4568 Industrial Section 40L Bulletin 95. Repair Parts.
www.cranepumps.com Parts for Fig. 55, 5 & 5 Item No. 1 2 * 1 19 23 * 2 32 33 * 39 2 9 70 71 * 73 101 101A 105 11 19 19A 170 199 212 21 219 22 * 21 22 2 250 25 255 25 * 257 25 20 25 27 2 270 277 25 29 29
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00
More informationPARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-500PT PISTON TYPE PUMP INDEX - Parts Page Drawing page - Fluid End Detail page - Piston Assembly, Liner & Pony Rod Detail page - Water Manifold Assembly Detail page 5 - Oil Manifold Assembly
More informationModels 9202C, 9203C, 9252C-C, and 9253C-C
Models 0C, 03C, C-C, and 3C-C 3 0 3 consists of () Ref. O-ring, () Ref. Mechanical Seal (Viton) and () Ref. Gasket. NOTE: When ordering parts, give quantity, part number, decription, and complete model
More informationSide Feeds * 6RG * 12RG * 20RG * 4.5PE * 5.0PE * 30RG * 7RG * 8.0PE * 13RG * 5.7PE * 4.5RG * 8K * 9.7PE
Prices Effective May 15, 2008 * 6RG * 30RG * 8.0PE * 8K * 9.7PE Side Feeds * 12RG * 4.5PE * 7RG * 4.5RG * 20RG * 5.0PE * 13RG * 5.7PE 7015 Old Hwy 105 W. Conroe, TX 77304 Office (936) 588-3033 Fax (936)
More informationBell & Gossett Parts List CP-106F-PL. Replacement Parts for. Series 60 Maintenance Free In-Line Mounted Centrifugal Pumps
Bell & Gossett Parts List CP-106F-PL Replacement Parts for Series 60 Maintenance Free In-Line Mounted Centrifugal Pumps SERIES 60 How to use this PARTS LIST The pump nameplate identifies the pump by model
More informationLitter Spreader. Models SP400, SP450, SP500, SP550. Illustrated Parts Breakdown
Litter Spreader Models SP00, SP0, SP00, SP0 Illustrated Parts Breakdown Page Front End Page Hydraulic System (w/ Side Mounted Reservoir) Page Hydraulic System (w/ Front Mounted Reservoir) Page Hydraulic
More informationTruck Pumps Water XS439 XS869
Truck Pumps Water XS439 XS869 Water Truck 9" BOOK: WTP-005 DATE: Jan. 1, 2012 Features: Volute: Heavy cast iron construction. Back pullout design. Can be rotated for ease of installation. Impeller: Double
More informationRear Roller Brush Kit Greensmaster 3150 & 3250
Rear Roller Brush Kit Greensmaster 50 & 50 Model No. 04640 Model No. 0464 Form No. 8 808 Rev. B Installation Instructions Note: The Rear Roller Brush Kit can only be installed on cutting unit models 0460
More informationB190 8 H.P. Lawn Vacuum (1995) Page 1 of 22 Chute Assembly
245-315B190 8 H.P. Lawn Vacuum (1995) Page 1 of 22 Chute Assembly 245-315B190 8 H.P. Lawn Vacuum (1995) Page 2 of 22 Chute Assembly Ref # Part Number Qty S/P/F Description 1 681-0068 1 S CHUTE ASSEMBLY
More informationThis guide is valid for all Grundfos CBS products beginning with product codes 10, 11 and 20. See back cover for explanation and identification.
END SUCTION PUMPS REPLACEMENT PARTS GUIDE TYPE LC, LF, LCV This guide is valid for all Grundfos CBS products beginning with product codes 10, 11 and 20. See back cover for explanation and identification.
More informationPENTAIR/PUREX A & AH SERIES PUREX L SERIES
PENTAIR/PUREX A & AH SERIES Pumps G- Edited -- 3 A 3 B OBSOLETE OBSOLETE COVER FOR " POT (P0) 00 0-C O-RING FOR COVER (P0) 0 3 00-B03 BASKET (000) 0 0-0 WING NUT WITH STUD (P0) 00 OBSOLETE OBSOLETE VOLUTE
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 405 / 406 SECTION: 17
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 / 0 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER,
More informationTelephone (925) Fax (925) Lawrence Drive, Livermore, CA 94551
Telephone (95) 454-9500 Fax (95) 454-950 5 Lawrence Drive, Livermore, CA 9455 PARTS MANUAL INDEX STEERABLE DRIVE AXLE ASSEMBLY STEERABLE DRIVE END ASSEMBLY BRAKE CALIPER ASSEMBLY TO USE THIS BOOK:. Refer
More information320 Series Models 325, 326, 327
0 Series Models,, ROTARY MOWER Published 0/ PARTS MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and
More information1. Main structure. Main structure Jet-288 Exploded views. Bearings and impeller shaft
Main structure 1. Main structure Code 288A 288C 288D 288E 288F 288G 288H 288I A B Name Frame Bearings and impeller shaft Impeller Stator Steering nozzle Reversing deflector Hydraulic cylinder Hydraulic
More informationPACO PUMPS REPLACEMENT PARTS GUIDE. A1b.2 4/06 Supercedes 8/05. Here are some guidelines and suggestions:
END SUCTION REPLACEMENT PARTS GUIDE CAT#: STOCK#: SER#: GPM: TDH: IMP. DIA: While End Suction Pumps are designed and built to provide maximum life while requiring minimum attention and service, replacement
More informationPARTS LIST SERIES 5400
File No. 6052.227 Date: September 29, 2004 Supersedes: 6052.227 Date: October 28, 2003 SEWAGE PUMP FOR PUMPS PRIOR TO SERIAL NUMBER 71854 OLD DESIGN 5400 SEWAGE PUMP PARTS IDENTIFICATION ITEM DESCRIPTION
More informationPARTS MANUAL. American Dish Service ADS CONVERTIBLE DISHWASHER MODELS: AF3DS / AFC3DS. EFFECTIVE: April, 2014
EFFECTIVE: April, 2014 ADS CONVERTIBLE DISHWASHER MODELS: AF3DS / AFC3DS PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 05/08 026-0090 / 027-0090 Models: 2 026-0090 / 027-0090 Models:
More informationEngineering Data. Single Reduction Parts List. Item # Description
Single Reduction Basic Single Reduction Unit. Gear Housing. Pipe Plug. Vent Plug 4. Splash Guard. Input Cover. O-Ring. Hex Head Cap Screw 8. Input Oil Seal 9. Input Bearing. Input Bearing *. Retaining
More informationProduct Catalogue. Version 8.0. Section. Arvin Meritor (ROR) Axle Components
Product Catalogue Section E Version 8.0 Arvin Meritor (ROR) Axle Components PRODUCT CATALOGUE 8.0 ArvinMeritor (ROR) Axle Type Capacity Wheel Fixing 300-0003-1D0F5 TM/T25010/ZMX 11,690 kg 10 stud M22 x
More information1. Main structure. Main structure Exploded views, AJ 288. Bearings and impeller shaft
Main structure 1. Main structure Code 288A 288C 288D 288E 288F 288G 288H 288I A B Name Body Bearings and impeller shaft Impeller Stator Steering nozzle Reversing deflector Hydraulic cylinder Hydraulic
More informationEDWARDS GEAR PUMPS REPAIR PARTS INDEX
SECION EDWARDS PAGE EDWARDS GEAR PUMPS REPAIR S INDEX READ AND UNDERSAND HE PUMP AND MOOR INSRUCIONS BEFORE AEMPING O INSALL, DISASSEMBLE OR REPAIR HE PUMP SECION EDWARDS PAGE 2 EDWARDS GEAR PUMPS MODELS,
More informationCHAMPION AND VOLVO GRADER SPARE PARTS
CHAMPION AND VOLVO GRADER SPARE PARTS S.No Part Number Part Name Price 1 10000 CABLE 2 10002 CABLE 3 10006 SPRING 4 10007 SPRING 5 10008 WASHER 6 10013 PAD 7 101024 STOP OT 8 10117 GEAR 9 108A2420 ELBOW
More informationKC Transmission Overhaul
KC Transmissions Overhaul Instructions Form No. F-1031 Section 4310 Issue Date Rev. Date 02/08/96 12/30/15 Table of Contents Disassembling.............................. 1 Driven Shaft.................................
More informationParts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS. Serial Number B & Higher. Part No.
Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS Serial Number B30970200 & Higher Part No. 408920 Front-Fold Booms 80 / 90 / 100 Introduction Foreward This symbol
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODELS: RPM & RPM SECTION: 79
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODELS: -0 RPM & -000 RPM SECTION: 9 0 Griffin Ave. Selma, Al. 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com April, 0 BUSH HOG/ LAND MAINTENANCE
More informationElectronic Service Manuals
Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions
More informationLoader Backhoe Front Axle Parts 2WD & 4WD
Loader Backhoe Front Axle Parts 2WD & 4WD SECTION G LOADER BACKHOE FRONT AXLE PARTS CASE 2WD AXLE PARTS G2 - G5 CARRARO APPLICATIONS G6 - G25 FRONT AXLE KITS G23 - G25 CASE POWER STEERING VALVES & PUMPS
More informationSPLIT CASE PUMPS REPLACEMENT PARTS GUIDE
PACO Split Case Kits are arranged so that you can replace virtually any component with minimum of effort. Here are some guidelines and suggestions: GENERAL NOTES: The pump nameplate contains all data required
More informationBERKELEY SSCX SERIES CENTRIFUGAL PUMPS
BERKELEY SSCX SERIES CENTRIFUGAL PUMPS WWW.BERKELEYPUMPS.COM REMARKABLE RELIABILITY High-head performance and quiet operation join corrosion-resistant dependability with Berkeley SSCX Series centrifugal
More informationOWNER S MANUAL CP, CB SERIES CENTRIFUGAL PUMP
OWNER S MANUAL CP, CB SERIES CENTRIFUGAL PUMP MODELS Medium Head Noryl Impellers Medium Head Brass Impellers High Head Noryl Impellers High Head Brass Impellers 1/3 through 2-1/2 H.P.: 115/230 Volt Single
More informationCENTRIFUGAL PUMPS GAS ENGINE FTSP FEATURES APPLICATIONS SPECIFICATIONS
FEATURES Volute: Ductile iron rugged construction. Self-priming with priming and drain plugs. Removable front cover features a built-in check valve to facilitate priming Impeller: Cast iron semi-open,
More informationMuncie Power Products, Inc.
SH6 & SH8 SERIES POWER TAKE-OFF PARTS LIST AND SERVICE MANUAL Muncie Power Products, Inc. SH6 & SH8 SERIES PTO EXPLODED VIEW PTO ASSEMBLY ARRANGEMENTS NO. 1 ASSEMBLY NO..3 ASSEMBLY 25 ft.lbs. 35 ft.lbs.
More informationSECTION 6 PARTS LIST
SECTION FIGURE NO. DESCRIPTION PAGE NO. -1 - - -4-5 - - -8-9 Oven Panels, Window and Legs Exploded Drawing Air Finger Exploded Drawing Control Panel Exploded Drawing Blower and Shroud Exploded Drawing
More informationMaterials: Parts of the pump in contact with the liquid are manufactured from the following standard
Plastic Centrifugal Pump For Chemical Process DIN EN 22858 (ISO 2858)Standard DESCRIPTION pumps are manufactured to DIN EN 22858 (ISO 2858) standards in respect of design, performance and dimensions. They
More informationData sheet. Page: 1 / 5 ETN GG A 11GA201502B. Operating data. Design. Requested developed head m. Efficiency 74.
Data sheet Page: 1 / 5 Operating data Requested flow rate 160.00 m³/h Actual flow rate 159.85 m³/h Operating data determined for maximum inlet pressure Actual developed head 20.96 m Requested developed
More informationProduct Parts Information
Product s Information Model FA5i (Dwg MHP2669) Save These Instructions Form MHD56287 Edition 4 December 2010 71444269 2010 Ingersoll-Rand Company Only allow Ingersoll Rand trained technicians to perform
More information