IGATEC - Standard - Swivel Joints

Transcription

1 IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International GmbH Siemensstr Speyer Germany Phone: +49 (0) Fax: +49 (0) info@igatec.de

2 Know How & Consulting directly from manufacturer with decades of experience That s why you choose IGATEC Radial Gaskets Allow a maximum of feasible sealing materials and longer lifetime compared to axial gaskets Bauform Bauform 11 DUPLEX, SUPERDUPLEX, HASTELLOY, ALUMINIUM We machine all compatible materials Gewicht [kg] Bauform 12 ASME, NACE, NORSOK, DIN We manufacture according to all required Guidelines and Directives Customized Connections Bauform 20 IGATEC Swivel Joints Made of carbon steel (e.g. St52-3, ) are nitrided to reach maximized hardness of surface and optimized corrosion protection at the same time Bauform 21 Certifications TA-Luft VdS ISO 9001:2008 Bauform 22 Bauform 30 Bauform 31 Division IGATEC International GmbH Lange Straße 23- D Hagen Headquarter IGATEC GmbH & IGATEC International GmbH Siemensstraße 18 D Speyer Phone: +49 (0) Fax: +49 (0) info@igatec-international.de Phone: +49 (0) Fax: +49 (0) info@igatec.de

3 Swivel Joint Type LW Dimensions: Nominal diameter DN / 1 up to DN700 / 28 [up to DN00 / on request] Working pressure 0 bar /1450psi* Working temp. -55 C up to 0 C /-67 F up to 482 F * Material St52-3, [other materials on request e.g. Aluminium, Hastelloy, etc.] Gasket material NBR, Viton, PTFE, HPU Ball material Stainless steel Connection Flange (ANSI/DIN/special), welding, threaded (female/male, NPT, BSP, etc.) Style, 11, 12, 20, 21, 22, 30, 31 Application Universal * P max and T max may not occur at the same time Technical Features: Design Standard No. of ball races 1 Fluid Diesel, Ethanol, LPG, Type of sealing Radial External dust seal Yes Secondary seal No Body Two-parts Connection for leakage On request control Without grease nipple On request (e.g. floating suction systems) Maximum speed Depends on gasket material Pos. Description 1 Outer part 2 Inner part 5 Back up ring 6 Internal wiper Gasket 11 Dust seal 12 Plug 15 Ball Grease nipple Further Advantages: Perfect concentric run-out, easy handling Certifications: TA-Luft IGATEC International GmbH Siemensstr Speyer Germany Phone: +49 (0) Fax: +49 (0) info@igatec.de 3

4 with Welding Connection 90 elbow according to DIN S DN L1 [mm] ± 28 ± Ø / D [mm] Style IGATEC International GmbH Siemensstr Speyer Germany Phone: +49 (0) Fax: +49 (0) info@igatec.de 4

5 with Flanged Connection (LWF) 90 elbow according to DIN S / welding flange DIN EN 92-1, Type 11 PN / (DIN 2632/2633) DN PN L1 [mm] ± 876 ± 28 ± 28 ± Ø / D [mm] Style IGATEC International GmbH Siemensstr Speyer Germany Phone: +49 (0) Fax: +49 (0) info@igatec.de 5

6 with Flanged Connection (LWF) 90 elbow according to DIN S / welding flange DIN EN 92-1, Type 11 PN / (DIN 2634/2635) DN PN L1 [mm] ± 876 ± 28 ± 28 ± Ø / D [mm] Style IGATEC International GmbH Siemensstr Speyer Germany Phone: +49 (0) Fax: +49 (0) info@igatec.de 6

7 with Female Thread (LWS) 90 elbow according to DIN S / socket according to DIN 2986 DN L1 [mm] Ø / D [mm] Style IGATEC International GmbH Siemensstr Speyer Germany Phone: +49 (0) Fax: +49 (0) info@igatec.de 7

8 with Male Thread (LWN) 90 elbow according to DIN S / socket according to DIN 2982 DN L1 [mm] Ø / D [mm] Style IGATEC International GmbH Siemensstr Speyer Germany Phone: +49 (0) Fax: +49 (0) info@igatec.de 8

9 with Customized Connections 90 elbow according to DIN S This datasheet allows easy determination of dimensions of Type W Swivel Joints with user-defined end connections. Important basic dimensions are specified. DN L1 [mm] Ø / D [mm] Style IGATEC International GmbH Siemensstr Speyer Germany Phone: +49 (0) Fax: +49 (0) info@igatec.de 9

10 with Customized Connections 90 elbow according to DIN S This datasheet allows easy determination of dimensions of Type W Swivel Joints with user-defined end connections. Important basic dimensions are specified. DN L1 [mm] Ø / D [mm] Style IGATEC International GmbH Siemensstr Speyer Germany Phone: +49 (0) Fax: +49 (0) info@igatec.de

11 Ordering System: Type Connections Nominal Working Style Material right / left diameter pressure Miscellaneous W = Welding 1 up to 28 St52-3 up to 1450psi DIN LW F= Flange 11 (up to on ANSI T S= Female thread 12 request) 42CrMo4 SAE LT (Bush) Duplex V N= Male thread 20 Hastelloy (for applications LA (Nipple) 21 Superduplex with higher LCF 22 pressure we offer HCR (other materials special swivel F 30 on request) joints) LF 31 FP LFP LW Additional Information: Media / Fluid (Gasoline, sulfuric acid, milk, LPG, ): Working temperature: Working space situation (Dimensions, temperature of environment, etc ): Type of movement (Swiveling / angle?, Rotation / rpm?, ): Side load: Miscellaneous requirements: IGATEC International GmbH Siemensstr Speyer Germany Phone: +49 (0) Fax: +49 (0) info@igatec.de 11