Bolt Torque Values - FLUOROLON (Sheet Ring Gaskets / Raised Face Flanges)
|
|
- Luke Armstrong
- 5 years ago
- Views:
Transcription
1 Bolt Torque Values - FLUOROLON (Sheet Ring Gaskets / Raised Face Flanges) Sheet Ring Gaskets on ASME B16.5 Raised Face Flanges with ASTM A193 Gr. B7 / A194 Gr. 2H Nuts Sheet Ring Gaskets on ASME B16.5 Raised Face Flange - Class 150 1/ /2 3/ / /2 1-1/ /2 1-1/ / /8 2-1/ / /8 3-1/ / / / / / / / / / /4 Sheet Ring Gaskets on ASME B16.5 Raised Face Flange - Class 300 1/ /2 3/ / /8 1-1/ /8 1-1/ / /8 2-1/ / /4 3-1/ / / / / / / / / / / /2 follows ASME B16.5 Pressure-Temperature rating tables. 4) Assuming ASME PCC-1 bolting pattern is followed. 5) Flange imperfections, rotation and deflection are ignored. 6) Bolt torque values in above To contact your nearest branch, please visit Page 1 of 5
2 Bolt Torque Values - FLUOROLON (Full Face Gaskets / Flat Face Flanges) Full Face Gaskets on ASME B16.5 Flat Face Flanges with ASTM A193 Gr. B7 / A194 Gr. 2H Nuts Full Face Gaskets on ASME B16.5 Flat Face Flange - Class 150 1/ /2 3/ / /2 1-1/ /2 1-1/ / /8 2-1/ / /8 3-1/ / / / / / / / / / /4 Full Face Gaskets on ASME B16.5 Flat Face Flange - Class 300 1/ /2 3/ / /8 1-1/ /8 1-1/ / /8 2-1/ / /4 3-1/ / / / / / / / / / / /2 follows ASME B16.5 Pressure-Temperature rating tables. 4) Assuming ASME PCC-1 bolting pattern is followed. 5) Flange imperfections, rotation and deflection are ignored. 6) Bolt torque values in above To contact your nearest branch, please visit Page 2 of 5
3 Bolt Torque Values - FLUOROLON (Sheet Ring Gaskets / FRP Flat Face Flanges) Sheet Ring Gaskets on FRP Flat Face Flanges with ASTM A193 Gr. B7 / A194 Gr. 2H Nuts Sheet Ring Gaskets on FRP Flat Face Flange - Class 150 Bolting Pattern 1/ /2 3/ / /2 1-1/ /2 1-1/ / /8 2-1/ / /8 3-1/ / / / / / / / / / /4 of 100 psi. 4) Assuming ASME PCC-1 bolting pattern is followed. 5) Flange imperfections, rotation, deflection, and flange strength are not considered in the calculation. 6) Bolt torque values in above To contact your nearest branch, please visit Page 3 of 5
4 Bolt Torque Values - FLUOROLON (KC Multi Gaskets / FRP Flat Face Flanges) KC Multi Gaskets on FRP Flat Face Flanges with ASTM A193 Gr. B8 Class 1 (or Similar Low Strength) / A194 Gr. 8 Nuts KC Multi Gaskets on FRP Flat Face Flange - Class 150 Bolting Pattern 1/ /2 3/ / /8 1-1/ /8 1-1/ / /8 2-1/ / /4 3-1/ / / / / / / / / / / /2 NOTES: 1) The design bolt stress used for calculation is based on 60% of bolt yield at room temperature. 2) Assuming new, non-coated and well lubricated bolts (ASTM A193 Gr. B8 Class 1 or similar low strength) and nuts are used with through-hardened washers. K factor of 0.20 was used in the calculation per ASME PCC-1. Multiply torque values by a factor of "K / 0.20" if using a lubricant with a different K factor. 3) Assuming maximum internal pressure of 100 psi. 4) Assuming ASME PCC-1 bolting pattern is followed. 5) Flange imperfections, rotation, deflection, and flange strength are not considered in the calculation. 6) Bolt torque values in above To contact your nearest branch, please visit Page 4 of 5
5 Bolt Torque Values - FLUOROLON (Full Face Gaskets / FRP Flat Face Flanges) Full Face Gaskets on FRP Flat Face Flanges with ASTM A193 Gr. B8 Class 1 (or Similar Low Strength) / A194 Gr. 8 Nuts Full Face Gaskets on FRP Flat Face Flange - Class 150 Bolting Pattern 1/ /2 3/ / /8 1-1/ /8 1-1/ / /8 2-1/ / /4 3-1/ / / / / / / / / / / /2 NOTES: 1) The design bolt stress used for calculation is based on 60% of bolt yield at room temperature. 2) Assuming new, non-coated and well lubricated bolts (ASTM A193 Gr. B8 Class 1 or similar low strength) and nuts are used with through-hardened washers. K factor of 0.20 was used in the calculation per ASME PCC-1. Multiply torque values by a factor of "K / 0.20" if using a lubricant with a different K factor. 3) Assuming maximum internal pressure of 100 psi. 4) Assuming ASME PCC-1 bolting pattern is followed. 5) Flange imperfections, rotation, deflection, and flange strength are not considered in the calculation. 6) Bolt torque values in above To contact your nearest branch, please visit Page 5 of 5
Description of Bolt Torque Tables
Maximum (preferred) torque required per bolt (foot pounds) to arrive at the maximum available / recommended gasket stress shown in the previous column. (4) Maximum gasket stress recommended or available
More informationDescription of Bolt Torque Tables
Maximum (preferred) torque required per bolt (foot pounds) to arrive at the maximum available / recommended gasket stress shown in the previous column. (4) Maximum gasket stress recommended or available
More informationLine Blank Specification
1.0 Purpose Line Blank Specification Page 1 of 14 1.1 This document provides specifications for line blanks (a.k.a. slip blanks, pancakes, paddle blanks) NPS 1/2 through NPS 24 up through Class 1500 and
More informationCASES OF THE B16 VALVE, FLANGES, FITTINGS AND GASKETS STANDARDS. Approval Date: December 16, 2013
Approval Date: December 16, 2013 Cases will remain available for use until annulled by the applicable Standards Committee B16 Case 1 High Strength/High Temperature Material ASME B16.34 Group 3 Valves ASME
More informationLeakage Behavior of Gaskets in Flanged Connections
Leakage Behavior of Gaskets in Flanged Connections M&Y Values vs. PVRC Gasket Factors and the use of Tightness Parameters By Chett Norton, C.E.T. November 17 th, 2014 Biography Chett Norton Applications
More informationASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
More informationHinge Pin. 7 Bearing. Spring Plate. Spring. Disc. Body. Gasket. Stop PIn
Hinge Pin Bearing Spring Plate Spring Disc Body Gasket Stop PIn TYPICAL MATERIAL OF MAIN PARTS No. Part Name Carbon Steel Stainless Steel Alloy Steel 1 Stop Pin 2 Gasket 3 Body 4 Disc 5 Spring 6 Spring
More information*Attachment A 1 SCOPE 1.1 This Standard covers cast copper alloy: (a) threaded pipe flanges and blind flanges having rating class designations 150, 300, 600, 900, 1500, and 2500, (b) flanged fittings having
More informationStarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines
Joint Restraint Products StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines INFORMATION StarFlex Flexible Expansion Joints can deflect
More informationIMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS. ANSI # 150.
IMPACT IMPEX PTFE, PFA, PVDF, PP LINED PIPE & FITTINGS.. The information contained in this publication is intended as a guide to customers, and is freely given in good faith. Whilst every care has been
More informationFlowserve TX2 Butterfly Valves Triple Offset TECHNICAL BULLETIN FCD DVENTB
Flowserve TX2 Butterfly Valves Triple Offset TECHNICAL BULLETIN FCD DVENTB0400-00 1 TABLE OF CONTENTS PAGE Theory of Operation.. 3 General Ordering Information 4 Torque values ASME Cl. 150. 5 Torque values
More informationPPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS
PPF PIPE FITTINGS (PAHANG) BUTTWELD FITTINGS 1 Pahang Pipe Fittings PPF is one of the leading manufacturers of Buttweld fittings and flanges. Our highly specialized product range is capable of catering
More informationHeavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36
Heavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36 H With a 34.5% thicker wall than SDR 35 and high impact retention ring. Royal Building Product's PVC Heavy
More informationCAESAR II What s New!
CAESAR II 5.10 What s New! Version 5.10 Productivity Release In-line Flange Analysis Tighter Integration with CADWorx New Codes, New Materials Versioning/Backup And More! Productivity Release -- I Improved
More informationLarge Diameter Steel Flanges
ASME B16.47-2011 (Revision of ASME B16.47-2006) Large Diameter Steel Flanges NPS 26 Through NPS 60 Metric/Inch Standard AN AMERICAN NATIONAL STANDARD ASME B16.47-2011 (Revision of ASME B16.47-2006) Large
More informationPipe Flanges and Flanged Fittings
ASME B16.5-2017 (Revision of ASME B16.5-2013) Pipe Flanges and Flanged Fittings NPS ½ Through NPS 24 Metric/Inch Standard AN AMERICAN NATIONAL STANDARD ASME B16.5-2017 (Revision of ASME B16.5-2013) Pipe
More informationHow You Benefit From The KC Sealing System A New Definition Of Leaky Flanged Joints Comparison Of Flanged Joint After Bolt-Up...
Benefits How You Benefit From The KC Sealing System...-1 A New Definition Of Leaky Flanged Joints...-2 Comparison Of Flanged Joint After Bolt-Up...-3 Joining Dissimilar Flange Adapter Types...- Gasket
More information+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics.
Factory Mutual Approved CLASS 26 HDPE Pipe & Pipe Fittings CENTRAL PLASTICS 8.499.692 Table Of Contents 18-1 Design-Flow HDPE IPS HDPE Pipe (Iron Pipe ) 4-24 18-2 PE 368 HDPE Physical Properties - FM 18-3
More informationOrificeMaster Specifications
Issue/Rev. 0.2 (10/06) Single Chamber Orifice Fittings OrificeMaster Specifications Bulletin SSOR005 FMC Technologies Measurement Solutions Orifice- Master Single Chamber Orifice Fitting is manufactured
More informationVMA Presentation Pressure Seal (MSS-SP-144) and ASME B Update Carlos E. Davila, PE March 2014
VMA Presentation Pressure Seal (MSS-SP-144) and ASME B16-2013 Update Carlos E. Davila, PE March 2014 CRANE FLUID HANDLING Fugitive Emissions Update EPA has been reducing the allowable fugitive emissions
More informationType 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
More informationGasket Reference Guide
Gasket Reference Guide Quick Gasket Reference...1 Spiral Wound Gasket Identification Ring Color Coding...7 Non-metallic Filler Materials...9 Metallic Winding Materials...9 Flange Face Designs...11 Gasket
More informationFasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
More informationFISHBONE THE FUTURE OF HIGH PERFORMANCE SEALING HAS ARRIVED
AIGI ENVIRONMENTAL INC. THE FUTURE OF HIGH PERFORMANCE SEALING HAS ARRIVED Patented FISHBONE Uncompressed Compressed 1,000,000 times lower leakage than TA-LUFT Test limit 25 times lower leakage than Chevron
More informationNELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
More information394C. Series 6400/6600. Safety Valves for Power Boiler Service
394C Series 6400/6600 Safety Valves for Power Boiler Service Series 6400/6600 Designed with the user in mind, Series 6400 and 6600 safety valves represent the most advanced technology in valves designed
More informationBALL VALVE DATA SHEET NO. 01 (150#)
BALL VALVE DATA SHEET NO. 01 (150#) VALVE CODE BF101 VALVE TYPE Double Flanged Full Port BODY MATERIAL CARBON STEEL TO ASTM A 216 Gr. WCB CLASS 150# DESIGN STANDARD ISO 17292 SIZE 1/2" TO 1 1/2" 2" TO
More informationCOMPLETE REVISION December Piping
December 2015 Piping Piping Material Specification 3SA0J01 Class 300, 304/304L Stainless Steel, Jacketed Construction, 0.000 C.A. Core: Process Jacket: Steam PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationASME END SUCTION PUMPS Catalogue K-90
ASME END SUCTION PUMPS Catalogue K-90 ASME B3.1-01 ISO 9001:008 REGISTERED COMPANY Engineered Pumps for Industrial and Municipal Services ASME B3.1 / ANSI END SUCTION PUMPS This catalogue provides the
More informationMercy Hospital of Buffalo Catholic Health System 2 nd Floor Patient Holding Center 3 rd Floor Locker Rooms Shaflucas Architects, PC Project No.
SECTION 23 22 13 STEAM AND CONDENSATE PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification
More information509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
50F Multi-Port Flanged Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 50F Series //5-Way Flanged Ball
More informationCOMPRESSED SHEET GASKET MATERIAL AVAILABLE MATERIALS
COMPRESSED SHEET GASKET MATERIAL AVAILABLE MATERIALS STANDARD NON ASBESTOS PREMIUM NON ASBESTOS MIL SPEC NON ASBESTOS CARBON FIBER EXPANDED PTFE (GORE-TEX ) PTFE (TEFLON ) FILLED PTFE THERMICULITE VEGETABLE
More informationCOMPLETE REVISION December Piping
December 2015 Piping PIP PN01SA0J01 Piping Material Specification 1SA0J01 Class 150, 304/304L Stainless Steel, Jacketed Construction, 0.000 C.A. Core: Process Jacket: Steam PURPOSE AND USE OF PROCESS INDUSTRY
More information505F Multi-Port Ball Valve
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way
More informationSteel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
More informationGeneral Service Gaskets and Specialty Gaskets
General Service Gaskets and Specialty Gaskets Universal FPM Gasket...2-1 Universal EPDM Gasket...2-2 EPDM Socket Fusion Ring Gasket...2-3 EPDM Fiberglass Reinforced Plastic Ducting Gasket...2-4 Gasket
More informationInstallation and Troubleshooting problems Associated with Isoalation Flanges October 2018 Nick Bander Engineering Manager
Installation and Troubleshooting problems Associated with Isoalation Flanges October 2018 Nick Bander Engineering Manager 1 Agenda Isolation kit installation Proper Installation Procedure Bolt torque Isolation
More informationFlow Conditioners. We put you first. And keep you ahead. FEATURES OPTIONS. Bulletin SS02007 Issue/Rev. 0.9 (10/14)
SPECIFICATIONS MEASUREMENT SOLUTIONS Flow Conditioners Bulletin SS02007 Issue/Rev. 0.9 (10/14) We put you first. And keep you ahead. Smith Meter TURBINE METERS Smith Meter Flow Conditioners optimize turbine
More informationConley Product Bulletin
EXTRA HEAVY DUTY CONLEY BASKET STRAINERS Conley Product Bulletin RUGGED TOP OF THE LINE PERFORMANCE ~ AFFORDABLE COST Conley Strainer Types Inline basket strainers in sizes from 1 ½ through 30 Inline Y-type
More informationMechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications
82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal
More informationSteel Products for Water, Wastewater and Industrial Piping Systems
Steel Products for Water, Wastewater and Industrial Piping Systems Couplings Flange Adapters Expansion Joints Dismantling Joints Joint Harnesses Custom Fabrication www.dresser.com Piping Specialties Bradford,
More informationType 427, 429. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 427, 429 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.05-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
More informationECCENTRIC PLUG VALVES
Serving the Water & Waste Water Industry Since 1878 ECCENTRIC PLUG VALVES C517 3 24 sizes available Multiple end connections available M&H Valve is a division of McWane, Inc. www.mh-valve.com AVAILABLE
More informationAxial Strength and Mating Screw Recommended Tightening Torque for PEM Brand Self-clinching Nuts
Brand S Nuts - Metric Mating Screw Recommended Tightening Torque, (N m) S-M2-0ZI 2.53 1220 0.15 0.19 0.28 0.40 0.45 0.59 0.68 S-M2-1ZI 2.53 1220 0.15 0.19 0.28 0.40 0.45 0.59 0.68 S-M2-2ZI 2.53 1220 0.15
More informationParamax Series Control Ball Valve. Specification Data CM6004 7/97
Paramax Control Ball Valve Specification Data CM6004 7/97 Table of Contents Numbering System........................ 3 Specifications............................ 4 Seal Ring Limitations......................
More informationType 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
More informationControl Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
More informationPWA-LF LOW FLOW ANSI PROCESS PUMP
PWA-LF LOW FLOW ANSI PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no
More informationSERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
CONNECTORS APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water
More informationSuper Flange series 7200 Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes
Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes INFORMATION The Series 7200 Super Flange is a restrained flange adapter designed to connect plain end pipe to a flange end component. May
More informationDesign Aids For Structural Welded Wire Reinforcement (Metric Units for WWR/Rebar Comparison Tables)
TF 209-R-08 Metric Design Aids For Structural Welded Wire Reinforcement (Metric Units for WWR/Rebar Comparison Tables) INTRODUCTION This Tech Fact* provides basic information on coldworked wire and welded
More informationPIP PN01SD0B03 Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, C.A., Process
May 2016 Piping Piping Material Specification 1SD0B03 Class 150, 316/316L Stainless Steel, Butt Weld, 0.000 C.A., Process PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost
More informationPWA-LF LOW FLOW ANSI PROCESS PUMP
PWA-LF LOW FLOW ANSI PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no
More informationPRESSURE REDUCING CONTROL VALVE
PRESSURE REDUCING CONTROL VALVE 06/08 Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) X P/L Standard Components 1 Main
More information3L/T 2100F-F Series. Ball Valve, 3 Way Class 150 (150# FE) 150# Flanged Ends, Side Entry, 1/2" - 6" Stainless or Carbon Steel.
L/T-2100F-BF-CS Series L/T-2100F-BF-S6 Series Quick Spec Product Scope Size Range 1/2" - 6" 150# Flanged Ends Port Type Full Port Port Type L-Port or T-Port Port Orientation Side Entry Pressure Rating
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
More informationProduct Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building
More informationType 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
More informationModel-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
More informationMustang Series PRESSURE REDUCING CONTROL VALVE. M115 (Globe) M1115 (Angle) Schematic. Standard Components. Options & Accessories.
PRESSURE REDUCING CONTROL VALVE 02/09 Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) P/L Standard Components 1 Main Valve
More informationSEMPELL HIGH PRESSURE CHECK VALVE MODEL VR500 (ASME)
Designed for use in high temperature and high pressure systems wherever a reverse flow has to be avoided. FEATURES Piston type check valve Body made of forged steel Wear resistant stellite body seat Separated
More information' ' ' ' LISTED Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts
.., I.,.,... I I...... I I ',,,, ", Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts&Bolts ' ; i ',,.) I ' ' ' ' AWWA C Class 50 (3"' ANSI B. Class 5 ("' ANSI B. Class 50 (3"' c@us LISTED
More informationBall Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
More informationCast Steel Bolted Cover Swing Check Valves Sizes: 2 thru 24 Pressure Class: 150 thru 1500
Cast Steel olted Cover Swing Check Valves s: 2 thru 24 Pressure Class: 150 thru 1500 Manufactured by Newmans 33 Newco Cast Carbon Steel olted onnet Valves Typical Newco Cast Steel olted Cover Swing Check
More informationPRODUCT CATALOGUE LOUCON METAL LTD. 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3. Hours of Operation: Monday-Friday 8:00 AM 5:00 PM
PRODUCT CATALOGUE 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3 Hours of Operation: Monday-Friday 8:00 AM 5:00 PM Phone: (613) 226-1102 Fax: (613) 226-6097 e-mail: info@louconmetal.com web: www.louconmetal.com
More informationTitan Check Valves. Call. Fax. . Visit. Titan Flow Control. Your Pipeline to the Future
Your Pipeline to the Future TITAN 290 Corporate Drive Lumberton, NC 28358 Titan Check Valves, Inc. is a high quality manufacturer of check valves. With a dedication to great customer service, cutting edge
More informationPRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING VALVE with LOW-FLOW BY-PASS FEATURE Main Line valve
More informationPIP PN03SA0B01 Piping Material Specification 3SA0B01 Class 300, 304/304L Stainless Steel, Butt Weld, C.A., Lube Oil & Seal Oil
May 2016 Piping PIP PN03SA0B01 Piping Material Specification 3SA0B01 Class 300, 304/304L Stainless Steel, Butt Weld, 0.000 C.A., Lube Oil & Seal Oil PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an
More informationPRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING VALVE with LOW-FLOW BY-PASS FEATURE Main Line valve
More informationGASKET REFERENCE GUIDE. Engineering Support Available at Flexitallic.com/chat
GASKET REFERENCE GUIDE Engineering Support Available at Flexitallic.com/chat Quick Gasket Reference...1 Spiral Wound Gasket Identification Ring Color Coding...6 Non-metallic Filler Materials...7 Metallic
More informationPRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Closes quickly when downstream pressure exceeds reduced pressure setpoint 3 PRESSURE REDUCING VALVE with SURGE
More informationFabricated Tee Strainers Style T & TQ; 150#, 300# and 600# Flanged or Butt Weld Connections...6 Technical Data...7
07/1 Fabricated Strainers Fabricated Y Strainers Style FSA & FSSA; 10#, 00# and 600# Flanged or Butt Weld Connections... Technical Data... Style FSA & FSSA; 900#, 100# and 00# Flanged or Butt Weld Connections...*
More informationTo: Distribution From: Applications Engineering. Re: M & Y Data for Distribution-SI Units Edition REVISED Date: February 27, 2008
Garlock Sealing Technologies Garlock Inc 1666 Division Street Palmyra, New York 14522-9350 315/597-4811 Fax 315/597-3290 http://www.garlock.com To: Distribution From: Applications Engineering Re: M & Y
More informationDistributed By: M&M Control Service, Inc
Fabricated Strainers Fabricated Y Strainers Style FSA & FSSA; 150#, 300# and 600# Flanged or Butt Weld Connections...2 Technical Data...3 Style FSA & FSSA; 900#, 1500# and 2500# Flanged or Butt Weld Connections...*
More informationSERIES MULTIPLE NOZZLE DESUPERHEATERS
1-4440 SERIES MULTIPLE NOZZLE DESUPERHEATERS 1-4442 SERIES SPRAYSAT DESUPERHEATERS MAIN FEATURES BODY sizes: water: 1" to 3"; steam: 3", 4" or 6" depending on the selected Cv. connections: ANSI, UNI and
More informationTHE RAGETM POWER UNLEASHED... CALL Forestry Mulching Mower
POWER UNLEASHED... Our Forestry Mulching Mower is designed to de-forest an area and return the debris back to the environment. The Rage cuts trees up to 14 in diameter and mulches trees up to 6. If you
More informationFASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN
A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves
More informationFLUID CONTAINMENT AND CONTROL SPECIALISTS SINCE
FLUID CONTAINMENT AND CONTROL SPECIALISTS SINCE 1967 CANFLEX METALLIC GASKETS CANFLEX Spiral Wound Gaskets Manufactured in Accordance with ASME B16.20 Spiral wound gaskets made with an alternating combination
More informationUSING EXABOND TECHNOLOGY LINER PIPE
LINER PIPE Inside Diameter Liner Thickness DN - Nominal diameter S 1 - Liner wall thickness d 2 - Outside diameter of liner Liner material density for PVC: 1.38g/cm 3 Liner material density for PVC-C:
More informationVERSAFLOW MAG 4000 Quick Start
VERSAFLOW MAG 4000 Quick Start Electromagnetic flow sensor The documentation is only complete when used in combination with the relevant documentation for the signal converter. CONTENTS VERSAFLOW MAG 4000
More information3"-42" FLANGE-TYTE II TM FULL FACE GASKET FOR FLANGED JOINTS 2016 EDITION FOR WATER & WASTEWATER, FIRE PROTECTION & INDUSTRIAL APPLICATIONS
TM FOR FLANGED JOINTS 3"-42" Certified to ANSI/NSF 61 FOR WATER & WASTEWATER, FIRE PROTECTION & INDUSTRIAL APPLICATIONS Table of Contents FULL FACE TM Gasket Introduction 3 Pressure Performance 3 Torque
More informationSPIRAL WOUND VERSUS FLEXIBLE GRAPHITE FACED SERRATED METAL PIPE FLANGE GASKETS IN THERMAL CYCLING AND PRESSURE COMPARATIVE TESTING
Proceedings of the ASME 2010 Pressure Vessel and Piping Division Conference PVP2010 July 18-22, 2010, Bellevue, Washington, USA PVP2010-25966 SPIRAL WOUND VERSUS FLEXIBLE GRAPHITE FACED SERRATED METAL
More informationIBV Series C-LF2 Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationGLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
More informationMAXIMUM PIPING OPERATING PRESSURE AS RECOMMENDED BY THE ASME PROCESS PIPING CODE Jacques Chaurette 2015
MAXIMUM PIPING OPERATING PRESSURE AS RECOMMENDED BY THE ASME PROCESS PIPING CODE Jacques Chaurette www.pumpfundamentals.com 2015 Summary Often one of the tasks of designing new pump systems or retro-fitting
More informationSeries 8500 Grayline Butterfly Valves
Series 8500 Grayline Butterfly Valves Features State-of-the-Art Manufacturing: Valves are produced using state-of-the-art manufacturing equipment. Each valve is tested to 110% of rated working pressure
More informationDIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION HVAC VALVES
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 05 23 PART 1 GENERAL 1.01 DESCRIPTION A. Provide valves for the following systems: 1. Heating Hot Water 2. Chilled Water 3. Condenser
More informationVALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED SERIES 61, 14" TO 24" 61W - Wafer style and 61L - Lugged style FEATURES
VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED 61W - Wafer style and 61L - Lugged style FEATURES Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
More informationAxial Strength and Mating Screw Recommended Tightening Torque for PEM Brand Self-clinching Nuts
Brand S Nuts - Unified S-256-0ZI 665 180 2.6 2.9 4.1 5.8 7.3 S-256-1ZI 665 180 2.7 3.1 4.4 6.2 7.7 S-256-2ZI 665 180 2.7 3.1 4.4 6.2 7.7 S-348-0ZI 800 180 3.8 4.3 6.1 8.6 11 S-348-1ZI 875 180 4.1 4.7 6.6
More informationEXTRACTION CHECK VALVES TYPE C09.6
Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for
More informationType 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
More informationDirect Contact Desuperheaters
Control Description Spirax Sarco direct contact desuperheaters reduce the temperature of superheated steam to produce steam temperatures approaching saturation temperature to cool the superheated steam,
More informationSeries 50 Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Full port, split body design
More informationStyle 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date
Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications
More information660 Tapping Machine. Features
660 Tapping Machine Sizes: 3- to12-inch Model 660C Bulletin No: 1000.005.06 Version: 07.2015 Cross Indexing No: n/a Supersedes: 1000.005.05 (06.2015) Model 660C Tapping Machines can be either air or hydraulically
More informationMark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves
Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2007. From the materials
More informationKeystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
More informationHopkinsons CONTENTS SCHEDULE OF SHELL BOILER MOUNTINGS. Hopkinsons. Safety Valves 5. Boiler Stop Valves 17. Feed Check Valves 18. Blowdown Valves 20
Hopkinsons SCHEDULE OF SHELL BOILER MOUNTINGS Quality assurance Weir Power & Industrial operates quality programmes to cover the full scope of their activities. Comprehensive quality systems have been
More information