Axial Strength and Mating Screw Recommended Tightening Torque for PEM Brand Self-clinching Nuts
|
|
- Kimberly Chandler
- 5 years ago
- Views:
Transcription
1 Brand S Nuts - Unified S-256-0ZI S-256-1ZI S-256-2ZI S-348-0ZI S-348-1ZI S-348-2ZI S-440-0ZI S-440-1ZI S-440-2ZI S-440-3ZI S-632-0ZI S-632-1ZI S-632-2ZI S-632-3ZI S-832-0ZI S-832-1ZI S-832-2ZI S-832-3ZI SS-024-0ZI SS-024-1ZI SS-024-2ZI SS-024-3ZI SS-032-0ZI SS-032-1ZI SS-032-2ZI SS-032-3ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI S ZI Published performance values are for general reference only. Specifications may change without notice. Testing of these products in your specific application is highly recommended. We will be happy to provide technical assistance and/or samples for this purpose. We will not be responsible for any loss, claims or damages arising out of the use or application of this information PennEngineering
2 Brand CLS Nuts - Unified CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLSS CLSS CLSS CLSS CLSS CLSS CLSS CLSS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS CLS Published performance values are for general reference only. Specifications may change without notice. Testing of these products in your specific application is highly recommended. We will be happy to provide technical assistance and/or samples for this purpose. We will not be responsible for any loss, claims or damages arising out of the use or application of this information PennEngineering
3 Brand SP Nuts - Unified SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP Published performance values are for general reference only. Specifications may change without notice. Testing of these products in your specific application is highly recommended. We will be happy to provide technical assistance and/or samples for this purpose. We will not be responsible for any loss, claims or damages arising out of the use or application of this information PennEngineering
4 Brand CLA Nuts - Unified w/180 ksi Develop Min. Aluminum Steel Stainless Steel Steel Steel Screw, lb Axial, ksi 2024-T4 Grade 2 ASTM F593C Grade 5 Grade ksi CLA CLA CLA CLA CLA CLA CLA CLA CLA CLA CLA CLA CLA CLA CLA
5 Brand SH, HNL and H Nuts - Unified SH X SH X SH X SH X SH X HNL-0420-LZ HNL-0518-LZ HNL-0616-LZ H-0616-ZI
6 Brand SMP Nuts - Unified SMPS SMPP SMPS SMPP SMPS SMPP
7 Table I Material Properties for Selected Strength Levels of Mating Screws UNIFIED Unified Units Metric Units Industry Material Strength, ksi Yield/Tensile Material Strength, MPa Standard Designation Ultimate Yield Ratio Ultimate Yield SAE J429 Grade ASTM 593 Grade C SAE J429 Grade SAE J429 Grade ASTM A574 (see note 3) METRIC ISO Property Class ISO Property Class ISO 3506 A ISO Property Class ISO Property Class ISO Property Class ISO Property Class Table II Material Properties Brand Unified Units Metric Units Nut Nuts Using Material Strength, ksi Yield/Tensile Material Strength, MPa Material This Material Ultimate Yield Ratio Ultimate Yield HNL Not Heat Treated Steel S, SS, H Standard Heat Treat SH Special Heat Treat Stainless CLS, CLSS, SMPS 300 Series Steel SP, SMPP A286 Age Hardened Aluminum CLA 2024-T Notes: 1) Other industry standards exist which define the same or similar strength levels. 2) Values in blue are conversions using 1 MPa= psi. 3) Minimum yield adjusted up to 162 ksi (90% of 180 ksi) from the 153 ksi required by ASTM A574.
Axial Strength and Mating Screw Recommended Tightening Torque for PEM Brand Self-clinching Nuts
Brand S Nuts - Metric Mating Screw Recommended Tightening Torque, (N m) S-M2-0ZI 2.53 1220 0.15 0.19 0.28 0.40 0.45 0.59 0.68 S-M2-1ZI 2.53 1220 0.15 0.19 0.28 0.40 0.45 0.59 0.68 S-M2-2ZI 2.53 1220 0.15
More informationSNAP-TOP STANDOFFS BULLETIN SSA 708 R E V. 409
SNAP-TOP STANDOFFS BULLETIN SSA 708 R E V. 409 SNAP-TOP STANDOFFS PEM SNAP-TOP Standoffs (s SSA, SSS, SSC, KSSB) are designed for permanent installation into metal panels or PC boards. These all-metal
More informationGyrolok Flareless Tube Fittings Tubing Data Charts
Gyrolok Flareless Tube Fittings Data Charts DESIGN HOKE Gyrolok Flareless Tube Fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application capabilities.
More informationS E L F - C L I N C H I N G S T U D S A N D P I N S
S E L F - L I N I N G S T U D S A N D P I N S SELF-LINING STUDS AND PINS F (flush-head) Studs are installed by placing them in punched or drilled holes in the sheets and squeezing into place with any standard
More informationare widely used because they provide a standardized surface for testing.
Steel Panels Steel panels are made from standard low-carbon, cold-rolled steel complying with ASTM A1008, A-109 and QQS- 698. Smooth Finish Steel Panels, Type QD have a smooth, bright finish produced at
More informationSELF-CLINCHING STUDS AND PINS
SELF-LINING STUDS AND PINS F (flush-head) Studs are installed by placing them in punched or drilled holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the
More informationDescription of Bolt Torque Tables
Maximum (preferred) torque required per bolt (foot pounds) to arrive at the maximum available / recommended gasket stress shown in the previous column. (4) Maximum gasket stress recommended or available
More informationVIKING HG SERIES HELICAL GEAR EXTERNAL GEAR PUMPS
Page 350.1 Series Description Viking s HG series positive displacement pumps are designed to provide low noise transfer and processing of clean, lubricating liquids for applications such as lube oils,
More informationCouplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More informationHIGH STRENGTH, ECONOMICAL AND EXCELLENT QUALITY STEEL PIPE PILES DELIVERED TO YOUR EXPECTATIONS
ESC STEEL PIPE PILES LSAW, SSAW & ERW PIPES HIGH STRENGTH, ECONOMICAL AND EXCELLENT QUALITY STEEL PIPE PILES DELIVERED TO YOUR EXPECTATIONS Pipe Piles can be utilised in a multitude of applications: such
More informationA PREMIER SERIES FLAT FACE COUPLERS ISO Interchange
A PREMIER SERIES FLAT FACE COUPLERS ISO 16028 Interchange The A Premier Series Flat Face ISO 16028 Interchange Couplings offer higher pressure ratings, superior flow characteristics, and lower pressure
More informationSELF-CLINCHING STANDOFFS BULLETIN
BUETIN SO 213 R e v 414 PEM self-clinching standoffs, which use the proven self-clinching design, provide ideal solutions for applications where mounting, spacing or stacking of panels, boards or components
More informationS ELF-CLINCHING S TANDOFFS. Revised 409 SO-1. PennEngineering
S EF-INING S TANDOFFS Revised 409 SO-1 SEF-INING STANDOFFS These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted
More informationSERIES: VLS. INTERCHANGE: With similar couplings MAIN APPLICATIONS. Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant
INTERCHANGE: With similar couplings MAIN APPLICATIONS Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant VLS series is the screw to connect coupling with poppet style valving,
More informationVIKING SG SERIES SINGLE PUMPS (WITH SHAFT SEAL)
SERIES SG-04, -05, -07, -10, -14 () Page 341.1.1 OPERATING RANGE: SERIES SG-04/-05 PUMP SG Pumps (, Lip or Mechanical Sealed) Displacements No. 29 Flow Range Pressure Range Temperature Range Viscosity
More informationVal-U-Act Ball Valve Operators. Air-Oil Systems, Inc.
Val-U-Act Ball Valve Operators Specifications: Class-Act (CL) Valve Operator (/4 /4 ) Double Acting Valve Operator Systems Valve Sizes from /4 to /4 48 in. lbs. to 80 in. lbs. As compared to other rotary
More informationPFM6 Digital Portable Hydraulic Tester
PFM6 Digital Portable Hydraulic Tester temperature Helical tube pressure gauge One toggle switch to control power and pressure Platinum resistance temperature sensor Pressure surge protection with internal
More informationFlat Face. Flat Face. Series: A Premier Interchange: ISO ISO Interchange Couplings
ISO 16028 Interchange Couplings Flat Face Overview A or Premier series offers higher pressure ratings, superior flow ratings, lower pressure drop compared to FIRG series or competitors products. Flat Face
More informationQUALITY HYDRAULIC PRODUCTS
QUALITY HYDRAULIC PRODUCTS N.R.P. ISO9001 Certified Quality System NRP- JONES Has What it Takes to Build Your Business! Over a half-century of experience helps you build customer satisfaction while increasing
More informationDesign Aids For Structural Welded Wire Reinforcement (Metric Units for WWR/Rebar Comparison Tables)
TF 209-R-08 Metric Design Aids For Structural Welded Wire Reinforcement (Metric Units for WWR/Rebar Comparison Tables) INTRODUCTION This Tech Fact* provides basic information on coldworked wire and welded
More informationDiaphragm Valves. NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS 1117 Progressive Products from Spears Innovation and Technology
Features, & This full-featured valve is engineered to provide accurate throttling control and shutoff for industrial, chemical and water treatment applications. Weir-type design eliminates entrapped fluids
More informationProduct Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building
More informationRuland. Carefully Made Shaft Collars and Couplings
Ruland Carefully Made Shaft Collars and Couplings Shaft Collars & RIGID couplings Shaft Collars from RULAND Ruland shaft collars are offered in multiple styles to fit shafts ranging from 1/8" to 6" in
More informationDirectional Control Valves
Overview HYDAC offers several functions of the Directional Control Cartridges. HYDAC Manually operated position, - way normally closed, spring return, directional valve features poppet design. It offers
More informationPiling Product Guide Edition. Servicesteel.org
Piling Product Guide 2017 Edition Strong Foundations Starith Service Steel Service Steel Supplies All Your Foundation Products You Are Our Number One Priority From industry leading steel sheet piling to
More informationROLLER LUBRICANT VISCOSITY RATING
CHAIN INFORMATION OUTER PLATE OUTER PLATE PIN 2 PIECES OF EACH MAKE AN OUTER LINK BUSH INNER PLATE INNER PLATE 2 PIECES OF EACH MAKE AN INNER LINK ROLLER AMERICAN BRITISH Lubrication (Dependent on power
More informationPressure Control Valves
Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal
More informationBolt Torque Values - FLUOROLON (Sheet Ring Gaskets / Raised Face Flanges)
Bolt Torque Values - FLUOROLON (Sheet Ring Gaskets / Raised Face Flanges) Sheet Ring Gaskets on ASME B16.5 Raised Face Flanges with ASTM A193 Gr. B7 / A194 Gr. 2H Nuts Sheet Ring Gaskets on ASME B16.5
More informationSECTION DIMENSIONS & PROPERTIES. Elastic Section Modulus About X-X. Radius of Gyration About X-X. (in 3 ) r x. (in) I y
r h s 6 10 COLD FORMED STRUCTURAL S DIMENSIONS & PROPERTIES IMPERIAL DIMENSIONS PROPERTIES Depth of Flange idth Length of Lip Thickness of Steel Area of Aout - Aout - Aout - Aout - Local of Minor Principal
More informationComparison Chart. extremely difficult. Finally, separated components can rarely be re-used.
JAN 2014 Traditional Connections Why Go Keyless Keyed Bushing Systems Both QD and Taper-Lock bushing and weld-on hub systems are popular component mounting technologies. Yet both are ultimately keyed connections
More informationThreaded Bar and Accessories
ed ar and ccessories old Rolled ed ar and ccessories pprox. Major ar Grade # # #4 0 0 0 #2 Nomal / 2 /4 / 5 2 /4 55 2 /4 55 2 /2 64 2 /2 64 /2 9 M. Net rea Thru s 2 ( 2 ) 0.7 5.0.000 6.0.270 9.0.5 06.0
More informationM/s Eiffel Building Material Trading L.L.C. Al Quos Dubai. M/s Golden Tools Trading Riyadh- Saudi Arabia. M/s New Chrome Fasteners Oman
We are please to introduce ourselves as the manufacturers of Threaded Rods Zinc Plated, Plain, Hot Dip Galvanized and Stainless Steel grade 04/6, Anchor bolts/foundation Bolts, Expansion bolts, U bolts,
More informationSheet 1 Variable loading
Sheet 1 Variable loading 1. Estimate S e for the following materials: a. AISI 1020 CD steel. b. AISI 1080 HR steel. c. 2024 T3 aluminum. d. AISI 4340 steel heat-treated to a tensile strength of 1700 MPa.
More informationHPI Cylinders. Manufacturers of Hydraulic & Air Cylinders Since 1946
HPI Cylinders Manufacturers of Hydraulic & Air Cylinders Since 1946 Cylinder Catalog 2018 HPI Cylinders www.hpicylinders.com Since 1946 Main Plant 13766 Milroy Place Santa Fe Springs, CA 90670 Phone (800)
More informationFemale - Swivel. 45 Elbow. 45 Elbow (5000 psi) 16E78 B-96 16B78 B /2 Elbow. 60 Elbow 16N78 B Elbow. Female - Swivel Long 1C978 B-101
atalog 4400 US Visual Index Use with 781, 782T, 782ST hoses. 10178-94 10678-94 13978-94 NPTF Pipe Male - Rigid JI 37 ode 61 11578-94 1478-95 11778-95 14F78-95 11978-95 14N78-96 ode 62 (5000 psi) 1678-96
More informationS ELF-CLINCHING S TANDOFFS
S EF-INING S TANOFFS SEF-INING STANOFFS These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted in the thin
More informationJIS G (SGP)
JIS G 3452-1988 (SGP) Nominal size Outside Diameter Thickness Unit Weight (plain end) A B mm in mm in lb/ft kg/m 6 1/8 10.5 0.413 2.0 0.079 0.282 0.419 8 1/4 13.8 0.543 2.3 0.090 0.438 0.652 10 3/8 17.3
More informationMG02 - MGE02 STEERABLE WHEEL MOTORS T E C H N I C A L C A T A L O G
MG02 - MGE02 STEERABLE WHEEL MOTORS T E C H N I C A L C A T A L O G Steerable wheel motors MG02 - MGE02 POCLAIN HYDRAULICS Methodology : This document is intended for manufacturers of machines that incorporate
More informationChlorine Gas Valves Robust Valve
Robust Valve Robust Valve The Sherwood Exclusive Robust Valve features a heavy-duty body and packing nut for increased load carrying capacity and resistance against stress corrosion and cracking. Key Features
More informationFULL RANGE PRESSURE COMPENSATING VARIABLE FLOW CONTROL
B Certificate FULL RANGE PRESSURE COMPENSATING VARIABLE FLOW CONTROL FC1 FC ISO 91:2 WIT DESIGN #2.2.1 FC1-3/ INLET (IN) FC FCB1-3/ INLET (IN) FCR1-3/ FCR1 INLET (IN) FEATURES: DIAMOND ONED SPOOL BORE
More information2 nd International Conference on Timber Bridges. Ryan Woodward Ted Zoli. Las Vegas, Two Bridges Built Using Black Locust Wood
2 nd International Conference on Timber Bridges Ryan Woodward Ted Zoli Las Vegas, 2013 Two Bridges Built Using Black Locust Wood Squibb Bridge Brooklyn, NY TWO BRIDGES BUILT USING BLACK LOCUST WOOD 2 12-6
More informationCYLINDRICAL ROLLER BEARING CATALOG TIMKEN THRUST AND PLAIN BEARINGS CATALOG
CYLINDRICL ROLLER BERING CTLOG TIMKEN THRUST ND PLIN BERINGS CTLOG Spherical Plain Bearings SPHERICL PLIN Overview: Timken s spherical plain bearings consist of a spherically ground inner ring housed in
More informationLOCKING BUSHES & SHAFT COLLARS
LOCKING BUSHES & SHAFT COLLARS INDEX TAPER BUSHES Page 3 WELD-ON HUBS Page 4 QD BUSHES Page 5 MECHANICAL LOCKING BUSHES CAL1 (Not Self-Centering) Page 6 CAL2 (Not Self-Centering) Page 7 CAL3 (Self-Centering)
More informationViscosity & Flash Point Standards For Reference, Validation, and Calibration
For Reference, Validation, and Calibration Since 1938 CANNON Instrument Company has been a leader in viscosity measurement. We provide a broad range of viscosity standards and flash point reference materials
More informationTerms and Conditions
Terms and Conditions GUARANTEE: All Brighton-Best International, Inc. products are manufactured to rigid quality control standards which meet or exceed industry standards. Records and tests pertaining
More informationHeader Manifolds - 0 Design
Header Manifolds - 0 Design Header block mounting hardware is supplied. See page 179 for itemized list. Ordering Information Specifications, descriptions, and dimensional data are subject to correction
More informationButterfly Valves. Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: Tel: Fax:
Butterfly Valves Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: 519-759-3911 Tel: 800-563-6302 Fax: 519-759-7970 www.craneenergy.com A Crane Co. Company Butterfly Valves Ordering Information
More informationVIKING SG SERIES SEALLESS MAG DRIVE PUMPS
SERIES SG-04, -05, -07, -0, -4 (Cast Iron) Section 34.3 Page 34.3. OPERATING RANGE: SG Pumps (Cast Iron Mag Drive) and SGN (Ductile Iron Mag Drive) Displacements No. 23 SG and 7 SGN 0.06 to 90 (SG) and
More informationMade. Quality. Rugged. American
Quality Control for Safety s Sake Our quality control procedures define the entire manufacturing process and provide complete traceability from raw materials, tested in our metallurgical lab, to finished
More informationPower Wheel Model 8 Planetary Gear Drives AuburnGear.com
Power Wheel Model 8 Planetary Gear Drives 260.92.30 AuburnGear.com MODEL 8 Features & A2 Integral Brake Information...3 MODEL 8 WHEEL DRIVES Double Reduction...4 with A2 Series Integral Parking Brake...6
More informationLIF TING SOLUTIONS. Lifting Solutions
Center Pull Style... 484-485 Envirolox Protective Finish... 494 Eye Bolts...500 Eye Nuts... 499 Forged Center Pull...487 488 Forged Center Pull Stainless Steel...486 Kwik-Lok Lifting Pin...495 496 Hold
More informationLeakage Behavior of Gaskets in Flanged Connections
Leakage Behavior of Gaskets in Flanged Connections M&Y Values vs. PVRC Gasket Factors and the use of Tightness Parameters By Chett Norton, C.E.T. November 17 th, 2014 Biography Chett Norton Applications
More informationRoxar 2 Hydraulic Access Fitting System Pressure ratings up to 6,000 psi/420 bar or 10,000 psi/690 bar
Roxar 2 Access Fitting System FA-T216-B Product Data Sheet Roxar 2 Access Fitting System Pressure ratings up to 6,000 psi/420 bar or 10,000 psi/690 bar Safer and More Efficient Operations The Roxar 2 Access
More informationRemote Oil Filter Mount
Remote Oil Filter Mount Part No. ENV-140 Made in USA Important: Read these instructions in their entirety prior to installation. Rev 170925 Parts List 1 x ENV-140 remote filter mount 1 x M22x1.50 oil filter
More informationASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
More informationPRODUCT CATALOGUE LOUCON METAL LTD. 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3. Hours of Operation: Monday-Friday 8:00 AM 5:00 PM
PRODUCT CATALOGUE 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3 Hours of Operation: Monday-Friday 8:00 AM 5:00 PM Phone: (613) 226-1102 Fax: (613) 226-6097 e-mail: info@louconmetal.com web: www.louconmetal.com
More informationModel 8. Power Wheel. Planetary Gear Drive
Model 8 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 8 Wheel Drives - Double Reduction 4-5 Model 8 Wheel Drives w/a2 Series Integral Parking Brake - Double Reduction 6-7 Model 8 Shaft
More informationP3M3H, P6M3H 3-VALVE HARD SEAT MANIFOLD
3-VALVE MANIFOLD 3/16 and 3/8 Bore 3-valve Manifold The 3-valve hard seat manifold designed for instrument calibration incorporates two shut-off valves and an equalizing valve in a single body. The manifold
More informationThe Effect of Biodiesel Fuel Blends on Diesel Particulate Filter Operation. Project Summary
The Effect of Biodiesel Fuel Blends on Diesel Particulate Filter Operation, October 10-13, 2006 Hannu Jääskeläinen, University of Toronto Lisa Graham, Environment Canada Cara Baas, Environment Canada James
More informationStandard Product Range
Standard Product Range Standard Pressure onnection Nominal size inch Product code mm ASME 150/200 psi Wafer Lugged 1 150/200 DJ 1 150/200 DJL Standard Product Range EN PN10 PN16 PN25 Wafer Lugged Wafer
More informationBALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS LENGTH
BALL SCREW LINEAR ACTUATOR BSA 2 OVERALL DIMENSIONS Stroke La =Lc + Stroke Lc T Capacitor Rear bracket Pin SP Standard head with threaded hollow bore BA depth 7 Stroke end reed switches FCM (brake motor)
More informationHigh Pressure Design. Design Temperature F (65.6 C)
STAR Super Seal - API 15HR Design (Product Data) OIL & GAS MINING Applications Production Lines or Injection Lines Oil, Gas, Saltwater Transfer Lines or Disposal Lines CO 2 and Sour Services Pipeline Rehabilitation
More informationDatasheet. control line. e109 - September Manufacturing Range. Experience. Applications. Production Facilities
Datasheet Experience The Oil & Gas sector represents one of Fine Tubes principal markets for supply of a wide range of tubular product forms and materials. Our products have been successfully used in some
More informationPRODUCT SELECTION GUIDE
PRODUCT SELECTION GUIDE Product Tensile Strength Property Class Diameter Size Range Length Evaluant Standard Psi Min N/mm Metric Inch* Metric Inch* IS ISO DIN BS ANSI JIS Hex Head Bolts/Screw 800/830 (8.8),0
More informationSELF-CLINCHING STANDOFFS
SEF-INING STANOFFS Page 1 of 7 These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted in the thin sheet. PEM
More informationMorehouse Instrument Company
The Morehouse Universal Calibrating Machine is designed to use a compression force standard, proving ring or load cell to calibrate units under test in compression and tension. The reference standard and
More information708 Series. Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES. CRN Registration Number Available
708 Series Fractional Flow Control Valves FRACTIONAL FLOW CONTROL S CRN Registration Number Available The Mark 708 was developed by Jordan Valve to provide the most accurate control available for fractional
More information*Attachment A 1 SCOPE 1.1 This Standard covers cast copper alloy: (a) threaded pipe flanges and blind flanges having rating class designations 150, 300, 600, 900, 1500, and 2500, (b) flanged fittings having
More informationThe Benefit of Sucker Rod Shot Peening
7 th Annual Sucker Rod Pumping Workshop Renaissance Hotel Oklahoma City, Oklahoma September 27-30, 2011 The Benefit of Sucker Rod Shot Peening Norman W. Hein, Jr., P.E. Director Development, Engineering
More informationISO 2909 / ASTM D
Oil Viscosity: Technically, the viscosity of oil is a measure of the oils resistance to shear. Viscosity is more commonly known as resistance to flow. If lubricating oil is considered as a series of fluid
More informationiglidur G The General Purpose Bearing: most popular iglidur material worldwide
Standards Wide Range from Stock polymer bearings G The General Purpose Bearing: most popular material worldwide from page 51 J The Fast and Slow Motion Specialist: used in long-life applications, also
More informationFull Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
More informationPTFE seals for screw compressors
PTFE seals for screw compressors Customized and off-the-shelf sealing solutions from SKF The Power of Knowledge Engineering If you know SKF just for bearings, you only know half the story SKF is your source
More informationPHARMACEUTICAL CLAMPS PRESSURE RATINGS (bar)
PRESSURE RATINGS CLAMP SIZE PRESSURE RATINGS (bar) Nominal Metric Max Working Pressure @ 150C Max Test Pressure Size Size S SH SSH ASME VIII S SH SSH ASME VIII 1/2"-3/4" - 25 50 75-50 100 150 - - DN 10-20
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More informationFusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit
Fusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit 71 I Fuse 105 Electrofusion Processor The IntegriFuse I Fuse 105 Electrofusion Processor is the next generation
More informationFOR MORE INFORMATION OR TO PLACE AN ORDER CALL TOLL FREE PAGE 30
COLD ROLLED STEEL ROUND, SQUARE, FLAT, HEX AND S.S. ROUND, THREADED ROD 1018 COLD ROLLED STEEL ROUND 3 1/8 --- -- 101218 $.60 103618 $1.60 3/1 --- -- 1012316.65 1036316 1.75 1/4 --- -- 101214.95 103614
More informationStyle 99 Roust-A-Bout Couplings
R IPS CARBON STEEL PIPE PLAIN END SYSTEM Style 99 Roust-A-Bout Couplings 14.02 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION 1 1 / 2-12" Sizes 14-18" Sizes Style 99 Roust-A-Bout couplings
More informationP.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
More informationDETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE
INCH-POUND 30 September 2011 SUPERSEDING MS51844D 19 April 2007 DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE This specification is approved for use by all Departments and Agencies of the Department
More informationBULLETIN 579 JULY 2011 APCO CONVERTIBLE SWING CHECK VALVES
BULLETIN 579 JULY 2011 APCO CONVERTIBLE SWING CHECK VALVES APCO Convertible Swing Check Valves Engineer: APCO is a unique check valve manufacturer. We are unique because we manufacture seven different
More informationPOWER-STUD. Mechanical Anchors GENERAL INFORMATION SECTION CONTENTS. Stainless Steel Wedge Expansion Anchor
General Information Mechanical s GENERAL INFORMATION POWER-STUD Stainless Steel Wedge Expansion PRODUCT DESCRIPTION The Power-Stud anchor, is a fully threaded, torque-controlled, wedge expansion anchor.
More informationLarge Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions
Engineering & Manufacturing Solutions LEFC Specifications: See flow chart for capacity. Max. 3000 psi cartridge input pressure. Nominally Rated for 3000 psi (207 bar). Tank Port - #4 SAE (10 psi (0.69
More informationLARGEST STOCK OF METRIC SIZE METALS IN AMERICA
WWW.METRICMETAL.COM METRIC SIZE METALS REFERENCE GUIDE 2009 ISO 9001:2000 Certifi ed LARGEST STOCK OF METRIC SIZE METALS IN AMERICA Our highly trained sales staff is waiting for your calls. With more than
More informationVIS 40 Series Two-speed
Specifications Back Pressure Relief Shuttle Selector Plate Plate Balance Plate Face Seal Mounting Flange End Cap Front Retainer Seal Guard Output Shaft Selector Geroler Drive Bearings Shaft Seal VIS 40
More informationDrilmax Steel Tubes. for the most demanding mining exploration drilling conditions
Drilmax Steel Tubes for the most demanding mining exploration drilling conditions Customer Benefits Drilmax steel tubes are cold drawn, heat-treated and straightened with the highest expertise to offer
More informationBUTTERFLY VALVES. Standard & True Lug Design. Sample Engineering Specification. Optional Accessories. Lever Handle. True Lug.
Standard & True Lug Design Lever Handle Gear Operating True Lug Lug Insert Style Sample Engineering Specification All thermoplastic valves shall be Butterfly type constructed from PVC Type I Cell Classification
More informationChampion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
More informationKeystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area
The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with
More informationVISCOSITY CALIBRATION STANDARDS
VISCOSITY CALIBRATION STANDARDS Cold-Cranking Simulator Standards (CCS) ASTM D 9 ISO 170 certified CCS viscosity standards are for the calibration and verification of analytical equipment used in Cold
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationRoxar 2 Mechanical Access Fitting System Pressure ratings up to 6,000 psi/420 bar or 10,000 psi/690 bar 1)
FA-T17-B Product Data Sheet Pressure ratings up to 6,000 psi/40 bar or 10,000 psi/690 bar 1) High Pressure Access Systems Roxar offers a complete range of access fitting assemblies for installation of
More informationDial Gauges. Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability.
Features Dial Gauges Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability. Standard steel test tip Ø 3.175mm, hardened stainless
More informationStainless Spring Steel Strip
Stainless Spring Steel Strip Tolerances according to DIN EN ISO 9445-2:2010-06 Chart 1 (fine tolerance) or as agreed Grade No.* Grade Name Standard Tensile Strength (Rm) Comparable 1.4301 X 5 CrNi 18-10
More informationCamcar Socket Screw Catalog
Camcar Socket Screw Catalog Effective April 1, 2017 Camcar Socket Screws Suior Socket Screw Products STANLEY Engineered Fastening is committed to offering a broad range of socket screw standard products
More information1 (25mm): Acrylic Others: Glass standard, hermetically sealed
Description & Features: A general purpose, versatile 1" (25mm) to 6" (150mm) dial, 304 stainless steel thermometer Bi-metallic sensing element for reliable readings Back, bottom or adjustable angle connection
More informationDevelopment of Motorized Car Jack
Development of Motorized Car Jack Ravi Kumar D Assistant Professor Mechanical Engineering SRM University Shubham Choudhary U.G. Student Mechanical Engineering SRM University Devanshu Pasbola U.G. Student
More informationEaton Spiral Hose and Hose Fittings 4S/6S and Product Positioning Eaton. All Rights Reserved..
Eaton Spiral Hose and Hose Fittings 4S/6S and Product Positioning. Product Portfolio Core Rubber Spiral Hydraulic Hose & Fittings High Temp Abrasion 4S/6S Low Temp 2 Simplification of the Eaton Spiral
More informationBOCCOLE ERNESTO RAAB SRL
C A BOCCOLE T A L O G O NESTO RAAB SRL Via Ghisalba,3-2002 Ospiate di Bollate (MILANO) Tel.: 023830375 - Fax : 0238303207 http://www.ernestoraab.it e-mail: cuscinetti@ernestoraab.it Internal clearance
More information