ASME END SUCTION PUMPS Catalogue K-90
|
|
- Erick Reed
- 5 years ago
- Views:
Transcription
1 ASME END SUCTION PUMPS Catalogue K-90 ASME B ISO 9001:008 REGISTERED COMPANY Engineered Pumps for Industrial and Municipal Services
2 ASME B3.1 / ANSI END SUCTION PUMPS This catalogue provides the information you need to select a Smart Turner ASME B3.1 Pump to fit your specific needs. The ASME End Suction Pump range continues the Smart Turner tradition of providing well proven, uncomplicated designs incorporating high efficiency and smooth, low NPSH performance in a compact economical, Heavy Duty End Suction Pump. Smart Turner ASME Pumps are ideally suited to plant service and chemical process applications where continuous, reliable operation is essential, whether the fluid is clean, dirty, corrosive or abrasive. Smart Turner ASME Pumps are quality built for rugged, trouble free operation. They are available with either grease or oil lubricated bearings as standard. Smart Turner ASME Pumps are engineered to exceed ANSI standards in all essential features. Impeller adjustment is positive and uncomplicated. High shaft stiffness yields low shaft deflections. Oversize bearings provide more than year L10 life in all cases. The large stuffing box and the rear impeller pump out vanes provide excellent heat dissipation and low stuffing box pressure for long packing and seal life. The recessed pump out vane arrangement minimizes the effects of wear by maintaining pump out efficiency throughout the full range of impeller adjustment. Smart Turner ASME Pumps are produced and stocked in a wide range of sizes using only three bearing housings. This makes an efficient parts inventory possible through extensive interchangeability of parts between pumps. With the inclusion of ASME Pumps, Smart Turner can now offer a range of End Suction Pumps, totaling over 60 models, with capacities to 6000 USGPM, heads to 800 feet and speeds to 3500 Rpm. This catalogue features ASME Chemical Process Pumps. For other EndSuction models, see catalogues B-90, D-90, F-90 and G-90. SMART TURNER SOLUTION TO PUMPING PROBLEMS Whatever fluids you pump, Smart Turner has the background and technology to help you meet your needs effectively and efficiently with quality designed and built pumps. Smart Turner has established an enviable reputation for reliability while pumping chemicals, oil, beverages, slurries or sewage.almost any liquid known to man. For over 100 years, Smart Turner has been dealing with and solving pumping problems throughout the world. This in-depth experience, coupled with modern computer technology at every level from concept to shipping, is available to you through our sales and engineering personnel, coast to coast. At Smart Turner, pumps are our only business, designed through experience to provide consistent performance and minimum maintenance. A wide range of sizes and types allows us to match the right pump to your specific application. For further information, or an evaluation or your pumping system requirements, contact your nearest Smart Turner sales office or distributor as listed on the back cover of this catalogue.. CONSTRUCTION MATERIALS All Iron 316 Stainless Alloy 0 CD4MCuN Hastelloy C Bronze Monel Other Materials on Application
3 PAGE INDEX PAGE SPECIFICATION... K-.0 DIMENSIONS Bare Pump... K-3.0 Pump, Base and Motor... K-3.1 PARTS #1 Frame Grease Lube... K-4.0 #1 Frame Oil Lube... K-4.1 # / #3 Frame Grease Lube... K-4. # / #3 Frame Oil Lube... K-4.3 Seal Arrangements... K-4.4 Gland Arrangements... K-4.5 MATERIAL LIST... K-5.0 PUMP DATA... K-6.0 RANGE CHARTS... K-.0 PHOTOS... K
4 K-.0 DESIGN AND CONSTRUCTION FEATURES: Pump: Back pullout construction to ASME B3.1 / ANSI dimensional standards. Top center line to discharge and casing feet ensure maximum rigidity and stability, while Smart Turner quality and precision ensure accurate fits and clearances. Casing: A radially split cast volute with integral suction cover, ruggedly designed with generous allowance for abrasion and corrosion. 150# ANSI flat faced flanged connections are standard. 300# flat faced flanges or RF are an option. Impeller: Cast in one piece, the fully open impeller is trimmed to the exact diameter required and is factory balanced. The heavy section of the impeller provides excellent wear and corrosion allowance and the partial rear shroud provides maximum support for the blades. Rear pump out vanes provide axial hydraulic balance and low, but normally positive, stuffing box pressure. The pump out vanes are recessed into the stuffing box cover to maintain pump out efficiency if axial adjustment is made. Stuffing Box Cover: A heavy one piece casting with rabbeted fit to the casing for positive alignment. The deep bore will accept a wide range of packing or mechanical seals. Optional Tapered and Big Bore stuffing boxing are available. Gland: Split for packed stuffing boxes and solid for mechanical seals, the gland can be provided in a variety of arrangements to suit the application. Gaskets: All gaskets are fully contained. Shaft: Precision machined high quality alloy, normally fitted with a renewable sleeve, and oversized to minimize deflection to ensure smooth operation and maximize packing or seal life. Hardened Shafts are available as an option. Sleeve: A precision machined, stainless steel, hook sleeve with an O- Ring seal against the impeller. A solid shaft without sleeve can be provided. Hardened Sleeves are available as an option. Bearings: Antifriction bearings are generously sized for longer life, with a double row thrust bearing for minimum end play. Grease or oil lubricated arrangements are available. Grease is recommended for most services as being simpler and more reliable. Bearings are protected by seals at both ends of the housing. Bearing Housing: A rigid casting with precisely machined bores and rabbet fit to the adaptor to ensure concentricity and alignment with the stuffing box cover, casing and rotating element. The smaller housing has an integral foot and integral adaptor. Adaptor: A rigid casting with integral gland drip reservoir, precision machined to ensure rigid and consistent alignment between bearing housing and liquid end. Interchangeability: All pumps utilize one of only three bearing housings. Pumps with the same bearing housing have fully interchangeable shafts, sleeves bearings, packing, seals, glands, and hardware resulting in an efficient parts inventory at both the factory and the customer. Tests: All pumps are hydrostatically tested to 50 PSI above the maximum casing design pressure. Performance Testing is available as an option OPTIONAL EQUIPMENT: Base: A rigid channel or fabricated base can be provided to our standard for electric motor drives. Special bases can be provided and can incorporate grout holes, drip rims and other features. Guard: A coupling guard to our standard can be mounted on the base plate. Special guards can be accommodated. Flexible Coupling: For normal duty our current standard is provided when a coupling is ordered. However, couplings of almost any style or manufacturer can be accommodated. Motors: An electric motor or other driver can be provided. Cooler: A cooling coil can be fitted to oil lubricated bearing housings for operation at elevated temperatures. No cooling is required for liquid temperatures below 350 F (1 C). Note; standard grease lubrication is good to liquid temperatures of at least 50 F (10 C). OTHER END SUCTION PUMPS Other Single Stage End Suction Pumps, End Suction design Two Stage Pumps, Non Clog Pumps, and Refuse Pumps are also available. 4.
5 DIMENSIONS ASME B3.1 / ANSI END SUCTION BARE PUMP K-3.0 PUMP FRAME # 150# ANSI FF PUMP DIMENSIONS MODEL SUCT DISCH CP D E1 E F H O U V X Y KEYWAY 1.5x1x /16 x 3/3 3x1.5x /16 x 3/3 1.5x1x /16 x 3/3 3xx x1.5x xx x3x x1x x1.5x xx x3x x1.5x xx x3x x4x x6x /8 x 5/16 10x8x /8 x 5/16 8x6x /8 x 5/16 10x8x /8 x 5/16 8x6x /8 x 5/16 10x8x /8 x 5/16 These are not certified dimensions. Certified drawing can be obtained on request. All dimensions in inches. 5.
6 DIMENSIONS ASME B3.1 / ANSI END SUCTION PUMP, BASE & MOTOR DIMENSIONS K-3.1 ANSI END SUCTION PUMP, BASE & MOTOR PAGE K-3.1 PUMP FRAME 15/150 # ANSI FF PUMP DIMENSIONS BASE PER MOTOR FRAME MOTOR DIMENSIONS MODEL # SUCT DISCH CP D X Y x1x A A A 3x1.5x A A A 1.5x1x A A A 3xx A 4A 5A 5A 6A 3x1.5x A 4A 5A 5A 6A PUMP FRAME 15/150 # ANSI FF PUMP DIMENSIONS BASE PER MOTOR FRAME 3xx A 4A 5A 5A 6A MODEL 4x3x8 # SUCT 4 DISCH CP 8.5 D 11 X Y A A A A A A x1x6 x1x A 1A 4A A 5A A 5A 6A A 3x1.5x A A A 3x1.5x A 4A 5A 5A 6A A 1.5x1x A A A 3xx10 3xx A 4A 5A 5A 6A A 3x1.5x A 4A 5A 5A 6A 4x3x A 4A 5A 5A 6A A 3xx A 4A 5A 5A 6A 6x4x10 4x3x B 3A 4B 4A 5B 5A 5B 5A 6B 6A A 3x1.5x13 x1x B 3A 4B 4A 5B 5A 5B 5A 6B 6A A A 3x1.5x A 4A 5A 5A 6A A 3xx B 4B 5B 5B 6B A 3xx A 4A 5A 5A 6A A 4x3x10 4x3x B 3A 4B 4A 5B 5A 5B 5A 6B 6A A 3x1.5x B 4B 5B 5B 6B A 6x4x B 4B 5B 5B 6B A 3xx B 4B 5B 5B 6B A 4x3x13 8x6x B 4B 5C 5B 5C 5B 6C 6B B A 8A 10x8x13 6x4x B 4B 5C 5B 5C 5B 6C 6B B A 8A 8x6x13 8x6x C 5C 5C 6C 6C B B 8A 8A 10x8x15 8x6x C 5C 6C 6C B B 8A 8A 10x8x13 8x6x C 5C 6C 6C B B 8A 10x8x15 10x8x C 5C 5C 5C 6C 6C B B 8A 8A BASE BASE DIMENSIONS PLATE HA HB HD HE HF HG HH HL HP HT 1A A A B A B A B C A B C A B A FRAME C M T T T T MOTOR DIMENSIONS 13T 18 5 FRAME 15T C 0 M 5 54T T 56T T 84T T TS 5 184T T 8 13T TS 6 15T T 34T TS 56T T 36T TS 36TS T 8 354T TS 6 364TS T TS 365T TS 36T TS 404T TS 354T TS T T TS TS T T TS 444TS T 445T TS 445TS T 44T TS TS 445T TS T TS These These are not are certified not dimensions. certified Certified dimensions. drawings Certified can be obtained drawing on request. can All be dimensions obtained inches. on request. Motor dimensions All dimensions are typical. in inches. Motor dimensions are typical. 6.
7 PARTS ASME B3.1 / ANSI END SUCTION #1 FRAME GREASE LUBE K-4.0 PART NO. DESCRIPTION PART NO. DESCRIPTION 100 Casing 16 Locknut, Outboard Bearing 101 Stuffing Box Cover 164A Seal, Outboard Bearing 103 Impeller, Open 164B Seal, Inboard Bearing 105 Bearing Cover, Outboard 165A Grease Fitting, Outboard Bearing 106 Split Gland (Packing) 165B Grease Fitting, Inboard Bearing 108 Bearing Housing 10A Pipe Plug, Bearing Housing 116 Bearing Cartridge 10B Pipe Plug, Stuffing Box 11 Flinger 10C Pipe Plug, Bearing Housing Drain 14 Shaft Sleeve 16 Packing 18 Shaft 19 Gland Nut 14A Bearing, Outboard (Thrust) 180A Capscrew, Bearing Cover 14B Bearing, inboard (Radial) 180B Capscrew, Gland 146A Lockwasher, Bearing 180C Capscrew, Bearing Housing to Casing 149 Stud, Gland 181 Allen Set Screw, Bearing Cover 150 Key, Coupling 191A Gasket, Casing 153A Flat Washer, Gland 401A O-Ring, Bearing Cartridge 155 Retaining Ring, Inboard Bearing 401C O-Ring, Shaft Sleeve Refer to pages K-4.4 and K-4.5 for optional stuffing box, seal and gland arrangements..
8 PARTS ASME B3.1 / ANSI END SUCTION #1 FRAME OIL LUBE K-4.1 PART NO. DESCRIPTION PART NO. DESCRIPTION 100 Casing 164A Seal, Outboard Bearing 101 Stuffing Box Cover 164B Seal, Inboard Bearing 103 Impeller, Open 165A Site Glass / Bottle Oiler 105 Bearing Cover, Outboard 165B Breather / Vent 106 Split Gland (Packing) 10A Pipe Plug, Bearing Housing 108 Bearing Housing 10B Pipe Plug, Stuffing Box 116 Bearing Cartridge 10C Pipe Plug, Bearing Housing Drain 11 Flinger 16 Packing 14 Shaft Sleeve 19 Hex Nut, Gland 18 Shaft 180A Capscrew, Bearing Cover 14A Bearing, Outboard (Thrust) 180B Capscrew, Gland 14B Bearing, inboard (Radial) 180C Capscrew, Bearing Housing to Casing 146A Lockwasher, Bearing 180D Capscrew, Gland Halves 149 Stud, Gland 181 Allen Set Screw, Bearing Cover 150 Key, Coupling 191A Gasket, Casing 153A Flat Washer, Gland 401A O-Ring, Bearing Cartridge 155 Retaining Ring, Inboard Bearing 401C O-Ring, Shaft Sleeve 16 Locknut, Outboard Bearing Refer to pages K-4.4 and K-4.5 for optional stuffing box, seal and gland arrangements. 8.
9 PARTS ASME B3.1 / ANSI END SUCTION #/3 FRAME GREASE LUBE K-4. PART NO. DESCRIPTION PART NO. DESCRIPTION 100 Casing 16 Locknut, Outboard Bearing 101 Stuffing Box Cover 163 Mechanical Seal 103 Impeller, Open 164A Seal, Outboard Bearing 104 Adaptor 164B Seal, Inboard Bearing 105 Bearing Cover, Outboard 165A Grease Fitting, Outboard Bearing 10 Gland (Mechanical Seal) 165B Grease Fitting, Inboard Bearing 108 Bearing Housing 10A Pipe Plug, Bearing Housing 116 Bearing Cartridge 10B Pipe Plug, Stuffing Box 11 Flinger 10C Pipe Plug, Bearing Housing Drain 14 Shaft Sleeve 180A Capscrew, Bearing Cover 14A Bearing, Outboard (Thrust) 180B Capscrew, Gland 14B Bearing, inboard (Radial) 180C Capscrew, Bearing Housing to Adaptor 146A Lockwasher, Bearing 180D Capscrew, Adaptor to Stuffing Box 149 Stud, Gland 180E Capscrew, Adaptor to Casing 150 Key, Coupling 181 Allen Set Screw, Bearing Cover 153A Flat Washer, Gland 191A Gasket, Casing 153B Flat Washer, Foot 401A O-Ring, Bearing Cartridge 155 Retaining Ring, Inboard Bearing 401B O-Ring, Adaptor to Bearing Frame 15 Frame Support 401C O-Ring, Shaft Sleeve 160 Eyebolt Refer to pages K-4.4 and K-4.5 for optional stuffing box, seal and gland arrangements. 9.
10 PARTS ASME B3.1 / ANSI END SUCTION #/3 FRAME OIL LUBE K-4.3 PART NO. DESCRIPTION PART NO. DESCRIPTION 100 Casing 164A Seal, Outboard Bearing 101 Stuffing Box Cover 164B Seal, Inboard Bearing 103 Impeller, Open 165B Breather, Bearing Housing 104 Adaptor 165A Sight Gauge, Constant Level Oiler 105 Bearing Cover, Outboard 10A Pipe Plug, Bearing Housing 106 Split Gland (Packing) 10B Pipe Plug, Stuffing Box 108 Bearing Housing 10C Pipe Plug, Bearing Housing Drain 116 Bearing Cartridge 10D Pipe Plug, Bearing Cover 11 Flinger 16 Packing 14 Shaft Sleeve 19 Hex Nut, Gland 18 Shaft 19B Hex Nut, Gland Halves 14A Bearing, Outboard (Thrust) 180A Capscrew, Bearing Cover 14B Bearing, inboard (Radial) 180B Capscrew, Gland 146A Lockwasher, Bearing 180C Capscrew, Bearing Housing to Adaptor 149 Stud, Gland 180D Capscrew, Adaptor to Stuffing Box 150 Key, Coupling 180E Capscrew, Adaptor to Casing 153A Flat Washer, Gland 181 Allen Set Screw, Bearing Cover 153B Flat Washer, Foot 191A Gasket, Casing 155 Retaining Ring, Inboard Bearing 401A O-Ring, Bearing Cartridge 15 Frame Support 401B O-Ring, Adaptor to Bearing Frame 160 Eyebolt 401C O-Ring, Shaft Sleeve 16 Locknut, Outboard Bearing Refer to pages K-4.4 and K-4.5 for optional stuffing box, seal and gland arrangements. 10.
11 SEAL ARRANGEMENTS ASME B3.1 / ANSI END SUCTION K
12 GLAND ARRANGEMENTS ASME B3.1 / ANSI END SUCTION K
13 MATERIAL LIST ASME B3.1 / ANSI END SUCTION PART NO. DESCRIPTION ALL IRON STAINLESS STEEL A 14B A 146B A 153B 155A 155B 155C A A 164B 165A 165B 10A 10B A 180B 180C 180D 180E 180G 191A 191B 401A 401B 401C Casing Stuffing Box Cover Impeller Open Adaptor Outboard Bearing Cover Gland (Packing) Gland (Mechanical Seal) Bearing Housing Flinger Shaft Sleeve Lantern Ring Bearing Sleeve Outboard (Thrust) Bearing Inboard (Radial) Bearing Seal Retaining Ring Bearing Lockwasher Gland Lockwasher Gland Stud Coupling Key Gland Washer Washer (Foot) Outboard Bearing Seal (Outboard) Inboard Bearing Retaining Ring Neck Ring Foot Eyebolt Outboard Bearing Locknut Mechanical Seal Oil Seal (Outboard) Oil Seal (Inboard) Grease Fitting Bearing Housing Vent Bearing Housing Drain Plug Stuffing Box Plug Packing Gland Nut Capscrew (Bearing Housing-Foot) Capscrew (Bearing Housing-Adaptor) Capscrew (Gland) Capscrew (Adaptor-Stuffing Box) Capscrew (Adaptor-Casing) Capscrew (Mechanical Seal Gland) Gasket (Casing) Gasket (Seal Gland) O-Ring (Bearing Cover Outboard) O-Ring (Bearing Housing-Adaptor) O-Ring (Sleeve) Ductile Iron Ductile Iron Ductile Iron Ductile Iron Rubber 316 Stainless 316 Stainless Stainless Stainless As Per Application Coated As Per Application Stainless Stainless Aramid Fiber Aramid Fiber Viton 316 Stainless 316 Stainless 316 Stainless Ductile Iron 316 Stainless 316 Stainless Rubber 316 Stainless 316 Stainless Stainless Stainless As Per Application Coated As Per Application Stainless Stainless Stainless Aramid Fiber Aramid Fiber Viton / Teflon K-5.0 MATERIAL SPECIFICATION FORM MATERIAL SPECIFICATION FORM Ductile Iron ASTM A Castings Alloy 0 ASTM A43 CNM Castings ASTM B43 Barstock 316 Stainless ASTM A, A16 WCB ASTM A108 or A56 ASTM A43 CF8M ASTM A6 Casting Barstock Castings Barstock CD4MCU ASTM A890 1B Castings 13.
14 PUMP DATA ASME B3.1 / ANSI END SUCTION SHAFT BEARINGS STUFFING BOX CASING IMPELLER MODEL CONNECTION SIZE FRAME SIZE DIA. AT CPLG. KEYWAY DIA. BETWEEN BRGS. DISTANCE BETWEEN BRG. CENTERS INBOARD BEARING (RADIAL) OUTBOARD BEARING (THRUST) BORE SLEEVE DIA PACKING SIZE DEPTH NOM. THICKNESS DRAIN CONNECTIONS TEST PRESSURE BASED ON COLD WATER (PSI) MAX. IMP. DIA. MIN. IMP. DIA. 1.5x1x6 3x1.5x6 1.5x1x8 1.5 x 1 3 x x /8 /8 /8 3/16 x 3/3 3/16 x 3/3 3/16 x 3/3 1-/16 1-/16 1-/ /4-1/4-1/4 1-3/8 1-3/8 1-3/8 /16 /16 /16-13/16-13/16-13/16 /16 /16 / /8 6-3/ xx6 3x1.5x8 3xx8 4x3x8 3 x 3 x x 4 x 3-5/16-5/16-5/16-5/ /4 8-3/4 8-3/4 8-3/ x1x10 3x1.5x10 3xx10 4x3x10 x 1 3 x x 4 x 3-5/16-5/16-5/16-5/ K-6.0 3x1.5x13 3xx13 4x3x13 6x4x13 8x6x13 8x6x15 10x8x13 10x8x15 3 x x 4 x 3 6 x 4 8 x 6 8 x 6 10 x 8 10 x /8-3/8-3/8-3/8 5/8 x 5/16 5/8 x 5/16 5/8 x 5/16 5/8 x 5/16-5/16-5/16-5/16-5/ / / / / /8 10-5/8 10-5/8 10-5/ /8 3-/8 3-/8 3-5/8 3-5/8 3-5/8 3-5/8 3-5/ * 1 ASME B3.1 / ANSI Pumps not shown 14.
15 RANGE CHARTS ASME B3.1 / ANSI END SUCTION ALL MODELS K
16 PHOTOS ASME B3.1 / ANSI END SUCTION K
17 PHOTOS ASME B3.1 / ANSI END SUCTION K
18 PUMPS ASME B Chemical Process Pumps Size to 10x8x1 Capacity to 6000 USGPM Head to 800 ft. Speed to 3600 rpm Metallurgy, Alloys,, Exotics Double Suction Size to 14x1x16 Capacity to 8000 USGPM Head to 50 ft. Speed to 3600 rpm Metallurgy, Bronze Multi-stage High Pressure Boiler Feed Size to 4xx10 Capacity to 400 USGPM Head to 800 ft. Speed to 3600 rpm Metallurgy, Bronze End Suction Size to 10x8x16 Capacity to 4000 USGPM Head to 400 ft. Speed to 3600 rpm Metallurgy, Alloys, Exotics Non-clog Solids Handling, Vertical/Horizontal Dry Pit Solids Handling Size to 1x10x19 Capacity to 6000 USGPM Head to 50 ft. Speed to 1800 rpm Metallurgy, Bronze, Alloys Refuse Wet Pit/Dry Pit Solids Handling Size to 4x4x10 Capacity to 600 USGPM Head to 100 ft. Speed to 1800 rpm Metallurgy, Alloys Vertical Cantilever Vertical Process Size to 10x8x16 Capacity to 4000 USGPM Head to 300 ft. Speed to 3600 rpm Metallurgy, Alloys, Exotics Vertical Sump Wet Pit Service Size to 10x8x16 Capacity to 4000 USGPM Head to 300 ft. Speed to 3600 rpm Metallurgy, Alloys, Exotics 18.
19 M 3 /S FLOW H USGPM IGPM PSI m CFM.119 L/S 5.59 MIGD Ins. Hg kpa mm Hg CFS M 3 /D Atmos kg/cm M 3 /H Imp Gal CONVERSION CHARTS US Gal 4.0 PRESSURE Ft 3 M Acre Ft 4 Ft Multiply in direction of arrow. Divide in opposite direction. Multiply in direction of arrow. Divide in opposite direction MIG English Metric Decimal English Metric Decimal English Metric Decimal English Metric Decimal / / / / / / / A / / / B / C / D / / F G / / / H / I / / J...0 1/ K / / / / L / M / / N / / / / O / P / / / Q R / / / S / / T / / / / U / / V.30 5/ / / W / / / X / Y / / / Z / / / / Nom. Size Tap Use Drill Bit (Closest) Decimal 0-80 NF 3/64 3/ NC # NF #53 1/ NC # NF # NC #4 5/ NF # NS # NC #43 3/ NF #4 3/ mm-0.60mm.5mm /8-40 NS # NC # NF # NC #35 / NS # NF # NS # mm-0.0mm 3.4mm mm-0.5mm 3.4mm NC # NF #9 9/ NS # /16-4 NS # NC #5 5/ /16-3 NS # NF #1 5/ mm-0.90mm 4.mm mm-0.80mm 4.3mm NC #16 11/ NF #14 3/ NEF # DECIMAL EQUIVALENTS TAP DRILL CHART RECOMMEND TAP DRILL TO USE FOR 5% DEPTH OF THREAD Nom. Size Tap Use Drill Bit (Closest) Decimal Nom. Size Tap Use Drill Bit (Closest) Decimal 14-0 NS # NC 31/64 31/ /4-0 NC # 13/ mm-1.50mm 1.mm NS # mm-1.5mm* 1.8mm mm-1.00mm 5.mm NF 33/64 33/ /4-4 NS # /8-11 NC 1/3 1/ /4-8 NF #3 / mm-.00mm 14.mm 35/ /4-3 NEF /3 / /8-18 NF 3/64 3/ /4-40 NS # mm-1.50mm 14.mm -.58 mm-1.00mm 6.1mm 15/ /16-11 NS 19/3 19/ /16-18 NC Ltr.F 1/ mm-.50mm 15.8mm 39/ mm-1.5mm 6.9mm 1/ /16-16 NS 5/8 5/ /16-4 NF Ltr.I -.0 3/4-10 NC 1/3 1/ mm-1.00mm.1mm mm-1.50mm* 16.8mm /16-3 NEF 9/3 9/3.81 3/4-16 NF 11/16 11/ mm-1.5mm.9mm mm-.50mm 1.8mm 11/ /8-16 NC 5/16 5/ /8-9 NC 49/64 49/ mm-1.00mm 8.1mm /8-14 NF 13/16 13/ mm-0.5mm 8.3mm mm-1.50mm 0.9mm /8-4 NF Ltr.Q 1/ /8-18 NS* 53/64 53/ mm-1.50mm 8.mm mm-3.00mm 1.4mm 53/ mm-1.5mm 8.9mm 11/ NC /8 / mm-1.00mm 9.1mm mm-.00mm.3mm -.89 /16-14 NC Ltr.U 3/ NF 59/64 59/ mm-1.50mm 9.mm NS 15/16 15/ /16-0 NF 5/64 5/ /8- NC 63/64 63/ mm-1.5mm 10.5mm /8-1 NF 1 3/64 1 3/ mm-1.50mm 10.mm / /4- NC 1 /64 1 / NC /64 / /4-1 NF 1 11/ / mm-1.5mm* 10.9mm / /8-6 NC 1 /3 1 / NF 9/64 9/ /8-1 NF 1 19/ / NS 9/64 9/ NC 1 11/3 1 11/ mm-.00mm 1.mm NF 1 /64 1 / L 6100 Yd 3 VOLUME 61.0 In Multiply in direction of arrow. Divide in opposite direction. Smart Turner Pumps Inc. 39 Hardy Road, P.O. Box 8066, Brantford, Ontario, N3RX5, Canada 19. TEL: PUMP (86) FAX: (519) contact@smartturner.ca Website:
20 ASME B3.1 / ANSI END SUCTION PUMPS This catalogue provides the information you need to select a Smart Turner ASME B3.1 Pump to fit your specific needs. The ASME End Suction Pump range continues the Smart Turner tradition of providing well proven, uncomplicated designs incorporating high efficiency and smooth, low NPSH performance in a compact economical, Heavy Duty End Suction Pump. Smart Turner ASME Pumps are ideally suited to plant service and chemical process applications where continuous, reliable operation is essential, whether the fluid is clean, dirty, corrosive or abrasive. Smart Turner ASME Pumps are quality built for rugged, trouble free operation. They are available with either grease or oil lubricated bearings as standard. Smart Turner ASME Pumps are engineered to exceed ANSI standards in all essential features. Impeller adjustment is positive and uncomplicated. High shaft stiffness yields low shaft deflections. Oversize bearings provide more than year L10 life in all cases. The large stuffing box and the rear impeller pump out vanes provide excellent heat dissipation and low stuffing box pressure for long packing and seal life. The recessed pump out vane arrangement minimizes the effects of wear by maintaining pump out efficiency throughout the full range of impeller adjustment. Smart Turner ASME Pumps are produced and stocked in a wide range of sizes using only three bearing housings. This makes an efficient parts inventory possible through extensive interchangeability of parts between pumps. With the inclusion of ASME Pumps, Smart Turner can now offer a range of End Suction Pumps, totaling over 60 models, with capacities to 6000 USGPM, heads to 800 feet and speeds to 3500 Rpm. This HEAD catalogue OFFICE features AND MAIN ANSI End SALES Suction OFFICE: Pumps. For other End Suction models, Smart see Turner catalogues Pumps Inc. B-90, D-90, F-90 and G Hardy Road, P.O. Box 8066, Brantford, Ontario, N3RX5, Canada TEL: (519) FAX: (519) 5-14 Website: DISTRIBUTION: Smart Turner Pumps Inc. takes great pride in it s global distribution network. If you need it we will ship it, anywhere in the world. REPRESENTED BY: 0. CONSTRUCTION MATERIALS All Iron 316 Stainless Alloy 0 CD4MCuN Hastelloy C Bronze Monel Other Materials on Application
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
More informationAURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS
AURORA 3500 Series MODEL 3560 ASME/ANSI B73.M INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM AURORA 3500 Series Model 3560 ASME/ANSI B73.M Industrial Process Pumps Capacities to 7000 GPM (590 m 3 /hr) Heads
More informationPROCESS PUMPS MODEL V200 ANSI B73.2
EAGLE PROCESS PUMPS V200 ANSI B73.2 POWER END Shaft Diameters Bearings Stuffing Box PUMP END Maximum Diameter Solids Minimum Casing Thickness Casing Corrosion Allowance Working Pressure Test Pressure
More informationModel 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
More informationbarmesapumps.com WHAT IS AN ANSI PUMP
WHAT IS AN ANSI PUMP In 1977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition of the materials and safety specifications,
More informationPWA ANSI / ASME B73.1 PROCESS PUMP
PWA ANSI / ASME B73.1 PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no
More informationANSI Centrifugal Process Pumps. 911 Series
ANSI Centrifugal Process Pumps 9 Series WHAT IS AN ANSI PUMP In 977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition
More informationBulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
More informationPWA-IL B73.2 IN-LINE
PWA-IL ANSI/ASME B73.2 IN-LINE PROCESS PUMP PWA-IL ANSI/ASME B73.2 IN-LINE PROCESS PUMP COMPETITIVE ADVANTAGES vs. Ductile Iron n High-strength, impact resistant liquid ends for improved durability and
More informationBulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter
Bulletin C 1.2.34.5 Dean Pump Division ANSI/ASME B73.1 Horizontal Process ph2140 Telescoping Guard ph2140 C-Face Adapter Dean Pump Series ph Centrifugal Process Pumps Capacities to 3200 GPM (726 m 3 /hr)
More informationCENTRIFUGAL PROCESS PUMPS MODEL A100 ANSI B73.1
CENTRIFUGAL PROCESS PUMPS MODEL A ANSI B7.1 Heavy Duty Design Features Permit a Wide Range of Process Services All EAGLE A pumps have 1 lb. raised face flanges as standard except 1" and " casings which
More informationGoulds Small Capacity Double Suction Pump
Goulds 3410 Small Capacity Double Suction Pump 3410 Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, Capacities to 7,000 GPM (1591 m3/h) Heads to 550 feet (168 m) Temperatures to
More informationCSO/CP Series. Alloys to suit all applications. Proud Manufacturers of SAMCO Pumps
CSO/CP Series SAM Engineering (Pty) Ltd. 2 Duncan Road, Lilianton, Boksburg, South Africa Tel: +27 (0) 23 Fax: +27 (0) 2393 Email: pumps@sameng.co.za www.sameng.co.za Alloys to suit all applications Proud
More informationGoulds Model JC. Lenntech. Slurry Pump. Tel Fax
Goulds Model JC Slurry Pump Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds JC Designed for Handling a Wide Range of Corrosive / Abrasive Slurries Capacities
More informationPWA-LF LOW FLOW ANSI PROCESS PUMP
PWA-LF LOW FLOW ANSI PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no
More informationWilfley. Model. Technical Handbook. ASME B73.1 Chemical Processing Pump
Wilfley Technical Handbook ASME B73.1 Chemical Processing Pump Model A7 Wilfley Model A7 Chemical Processing Pumps Wilfley hydraulic seal in actual operation. ASME B73.1 M-91 Wilfley s Model A7 pump series
More informationCentrifugal End Suction Fire Pumps
Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These
More informationSUGGESTED SPECIFICATIONS
PART 1 - GENERAL 1.01 SCOPE A. Pumps to be supplied under this specification shall be of a severe duty, recessed cupped impeller design suitable for use in (SLUDGE, GRIT, ETC. APPLICATIONS) with a 20 year
More informationIndex - Section 14 End Suction Pump Semi-Open Impeller
Index - Section End Suction Pump Semi-Open Impeller ITEM S Product Numbering System...1 Typical Architects / Engineers Specifi cations - Series 4000...2 Seal Application...3-4 Technical Charts...5-6 Pump
More information3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)
3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency
More informationRS Multi-Stage, Ring Section Pumps
RS Multi-Stage, Ring Section Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The RS Series is Carver s multi-stage pump for fluids at moderate to high pressures. The
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More information3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS
3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800
More informationTECHNICAL HANDBOOK. Heavy Duty ASME B73.1. Wilfley Sealing Technology. No Flush Water Required
TECHNICAL HANDBOOK Heavy Duty ASME B73.1 A9 Wilfley Sealing Technology No Flush Water Required WILFLEY SEALING TECHNOLOGY Wilfley Sealing Technology is the premier sealing solution for the toughest pumping
More informationVolute Casing Pumps LSN. according to iso 2828 / iso Jansen Pompentechniek T: +31(0) E:
Volute Casing Pumps LSN according to iso 2828 / iso 5199 Technical Data Performance Range: m Capacity up to 500m 3 /h (1980USgpm) m Head up to 150m (492feet) m Speed 2950/3550rpm Pump Sizes: m DN 25 up
More informationEFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
More informationCPT ANSI Process Pumps
Sulzer Pumps CPT ANSI Process Pumps The Heart of Your Process There Are Two Sides to Every Story: Inside and Outside On the outside, the CPT offers special features that simplifies maintenance and adjustments.
More informationDry installed end-suction pumps, LSN-series. according to ISO 2858 / ISO 5199
Dry installed end-suction pumps, LSN-series according to ISO 2858 / ISO 5199 Technical characteristics Performance 50 Hz 60 Hz Capacity up to 600 m 3 /h 2900 USgpm Head up to 170 m 800 feet Speed up to
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More informationPWH API 610 SINGLE STAGE OH2
PWH API 610 SINGLE STAGE OH2 PWH API 610 PROCESS PUMP HYDRAULIC PERFORMANCE COVERAGE 60 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain
More informationHORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type AE CHECKING LIST
Section Tab 1200 SINGLE STAGE DOUBLE SUCTION Section 1210 List Prices Removed 07-01-02 Use Rapid Section 1220 Data Page 0.1 & (Blank)(03-30-07) 1 & 2 (03-30-07) 2.1 & 2.2 (03-30-07) 2.21 & 2.22 (03-30-07)
More informationElite. KSB Australia Pty Ltd. Centrifugal Pump
Type Series Booklet Elite Centrifugal Pump Application The Ajax Elite centrifugal pump is suitable for handling water and similar liquids mainly used in the following applications. -Water Supply -Air conditioning
More informationPumPs. jacketed molten sulfur PumPs. Pumps Mixers Strainers Engineered Systems and Controls.
Pumps Mixers Strainers Engineered Systems and Controls jacketed molten sulfur PumPs PumPs for molten sulfur and other fluids requiring pumping at controlled temperatures. www.haywardgordon.com introduction
More informationPWA-LF LOW FLOW ANSI PROCESS PUMP
PWA-LF LOW FLOW ANSI PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no
More informationPWD. PWD API 610 BB1 Single Stage Pump
PWD PWD API 610 BB1 Single Stage Pump HYDRAULIC PERFORMANCE COVERAGE FLOW (m 3 /h) 50 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain
More informationPWM. API 610 BB3 Multistage Pump
PWM API 610 BB3 Multistage Pump HYDRAULIC PERFORMANCE COVERAGE FLOW (m 3 /h) 60 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain pump
More informationEN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPP. Heavy Duty, Single Stage ANSI Chemical Process Pump
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPP For more than 0 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen is an innovative
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
More informationGH General Horizontal, Close Coupled and Frame Mounted Pumps
GH General Horizontal, Close Coupled and Frame Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The GH Series is Carver s horizontal, end suction pump for handling
More informationPWH API 610 SINGLE STAGE OH2
PWH API 610 SINGLE STAGE OH2 PWH API 610 PROCESS PUMP HYDRAULIC PERFORMANCE COVERAGE 60 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain
More informationPWH API 610 SINGLE STAGE OH2
API 6 SINGLE STAGE OH2 API 6 PROCESS PUMP HYDRAULIC PERFORMANCE COVERAGE Hz Performance Coverage Visit our web site at www.pumpworks6.com and specify flow and performance needs and obtain pump selection,
More informationDuctile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationGoulds 3410 Small Capacity Double Suction Pumps
Goulds Pumps Goulds 3410 Small Capacity Double Suction Pumps Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds 3410 Double Suction Pumps Designed for a Wide Range
More informationVolute Casing Pumps LSN. according to iso 2828 / ISO 5199
Volute Casing Pumps LSN according to iso 2828 / ISO 5199 Technical Data Performance Range: m Capacity up to 500m 3 /h (1980USgpm) m Head up to 150m (492feet) m Speed 2950/3550rpm Pump Sizes: m DN 25 up
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationBulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs
Bulletin BX-1H Bell & Gossett Series HSC-S Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Programs TABLE OF CONTENTS Useful Pump Formulas...............................................
More informationGoulds 3181 High-temperature/Pressure Paper Stock/ Process Pumps
High-temperature/Pressure Paper Stock/ Process Pumps Designed to Handle High Temperature and High Pressure Services of the Pulp & Paper Industries Capacities to 13,000 GPM (3000 m 3 /h) Heads to 410 feet
More informationHigh-Temperature and Pressure Paper Stock / Process Pump
3186 High-Temperature and Pressure Paper Stock / Process Pump 3186 Designed to handle High-Temperature and High-Pressure services of the Pulp & Paper Industries. Capacities to 3000 m³/h (13,000 GPM) Heads
More informationPOWERFORCE PUMP POWERFORCE PUMP POWERFORCE PUMP GLOBAL SOLUTIONS DESIGNING, MANUFACTURING AND PACKAGING FOR THE OIL & GAS INDUSTRY
POWERFORCE PUMP POWERFORCE PUMP GLOBAL SOLUTIONS DESIGNING, MANUFACTURING AND PACKAGING FOR THE OIL & GAS INDUSTRY POWERFORCE Hard Iron Centrifugal Pump Parts Item Description Qty Part Number Reference
More information3340 Series Single Stage End Suction Pumps
3340 Series Single Stage End Suction Pumps Bulletin 3340/Rev. A Model 3344 Aurora 3340 Pump Setting New Standards of Efficiency Liquid handling requirements are much more involved than they were five years
More informationTECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and bedplates
More information340 Series Double Suction Split Case Pumps
340 Series Double Suction Split Case Pumps Flows to: 30,000+ GPM Heads to: 550 Feet Temperatures to: 250 F 140 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in America,
More informationQuality Value Assurance
Pump Selection Guide Quality Value Assurance In the beginning From it s inception in 1990 with one man in a service van, to the industry leader in innovative dairy solutions that DariTech is today, we
More information4500C Series Vortex Pumps
Section 009 Page 003 4500C Series Vortex Pumps Table of Contents 4500C Performance 2" x 2" - 4523C, Multiple Speed... 004 3" x 3" - 4523C, Multiple Speed... 004 4" x 4" - 4522C, Multiple Speed... 005 4"
More informationTECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and
More informationGoulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps Goulds 3186 Designed to Handle High Temperature and
More informationVogel - Volute Casing Pumps. according to ISO 2828 / ISO 5199 Design LSN
Vogel - Volute Casing Pumps according to ISO 2828 / ISO 5199 Design LSN 1 Volute Casing Pumps - Design LSN - according ISO 2858 / ISO 5199 Performance Capacity up to 450 m 3 /h (1980 USgpm) Head up to
More informationFire Protection. FP-XA End Suction
Fire Protection FP-XA End Suction PRODUCT BULLETIN MODEL FP-XA END SUCTION CPS Model FP-XA End Suction pumps are used in a variety of fire fighting applications. These rugged and efficient centrifugal
More informationCENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES
FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics
More informationPWM API 610 BB3 Multistage Pump
PWM API 610 BB Multistage Pump PWM API 610 BB MULTISTAGE PUMP HYDRAULIC PERFORMANCE COVERAGE 60 Hz Performance Coverage FLOW (m /h) Visit our web site at www.pumpworks610.com and specify flow and performance
More informationG&L Pumps. TECHNICAL Brochure BAC8100. Series A-C 8100 SPLIT CASE PUMPS
TECHNICAL Brochure BAC8 Series A-C 8 SPLIT CASE PUMPS TABLE OF CONTENTS Useful Pump Formulas 2 Performance Curves 3-5 Materials of Construction (Standard) 6 Materials of Construction (Optional) 7 Pump
More informationNC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
More informationSelf-Priming Fiberglass Pumps
Fybroc Division SERIES 16 Self-Priming Fiberglass Pumps B U L L E T I N 16B1 FYBROC THE LEADER IN CORROSION-RESISTANT FIBERGLASS PUMPING EQUIPMENT Fybroc is the leading manufacturer of fiberglass reinforced
More informationPA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.
END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,
More informationBULLETIN January Goulds Model 3700 API th Edition/ISO Process Pumps
BULLETIN 724.1 January 2005 Goulds Model 3700 API-6 th Edition/ISO 13709 Process Pumps Goulds Model 3700 High Temperature/High Pressure Process Pumps Designed to Meet the Requirements of API-6 th Edition/ISO
More informationSelf-Priming Process Pumps with Patented Intelligent Monitoring. Lenntech
Self-Priming with Patented Intelligent Monitoring Lenntech info@lenntech.com Tel. +31-12-61-9 www.lenntech.com Fax. +31-12-616-289 Goulds 3796 Self-Priming Designed for Total Range of Industry Services
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE:
Page 1701.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationUNIVERSAL PRODUCT LINE: DUCTILE IRON JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
Page 1602.1 TABLE OF CONTENTS Features & Benefits...2 Porting & Sealing...2 Jacketing...2 Revolvable Pump Casings...2 Cutaway View & Pump Features...3 Model Number Key...4 Standard Materials of Construction...4
More informationAxially Split Case Pumps
Axially Split Case Pumps A-C Pump A-C SPL Standard Design Features for a Wide Range of Heavy Duty In STUFFING BOX Packing is standard on the A-C products. A wide variety of mechanical seals, including
More informationPWM APi 610 BB3 Multistage Pump
PWM APi 610 BB3 Multistage Pump HyDrAUliC PerfOrMAnCe COVerAge FLOW (m 3 /h) 60 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain pump
More informationEBARA Self Priming Trash Pump. Type EFQT-EFQU
Type EFQT-EFQU Contents Section Page Model Designation 2 Features 3 Selection Chart 7 Dimension Drawings 20 Technical Data 24 Sectional View 25 1 Model Designation EFQ T 2 A MODEL TYPE EFQ self priming
More informationGoulds High-Pressure Multi-Stage Pumps
Goulds 3311 High-Pressure Multi-Stage Pumps Goulds Model 3311 Multistage Pumps Designed for a Wide Range of High Pressure Services Goulds Model 3311 is a radial split, segmented ring multistage pump...
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 223A, 4223A, 323A, 4323A Page 1302.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable Pump Casings...3 Cutaway View
More informationVCMVerticalInlineProcessPump
VCMVerticalInlineProcessPump SingleStageVerticalCentrifugal PumpsforGeneralService, Petroleum and Petrochemical Applications. VCM-0000 September 1,1999 4600West Dickman Road Battle Creek,Michigan 49015-1098
More informationModel 3196 STi Size 1x1.5-6 OUTLINE DRAWING. Weights and Measurements. Pump Specification. Notes and References. Motor Specification
OUTLINE DRAWING Pump Specification SUCT.FLANGE SIZE 1.5'' DRILLING ANSI 150# FACING FF FINISH SERRATED DISCH.FLANGE SIZE 1'' DRILLING ANSI 150# FACING FF FINISH SERRATED PUMP ROTATION ( LOOKING AT PUMP
More informationCRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38
CRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38 1 ease of installation & maintenance Install like a valve Mount in the pipeline Support on pipe or foundation... Save space - save time
More informationSeries Split Coupled Vertical In-Line Pumps. File no.: 43.10in Date: august 14, 2013 Supersedes: 43.10in Date:
Series 00 Split Coupled Vertical In-Line Pumps File no.:.0in Date: august, 0 Supersedes:.0in Date: february 0, 0 Series 00 Best commercial hvac pump design available since 99 Life cycle value at every
More informationContents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
More informationBlockpumps. Vogel Series LSB WITH HYDRAULICS ACCORDING TO ISO 2858
Blockpumps Vogel Series LSB WITH HYDRAULICS ACCORDING TO ISO 2858 Technical Data Performance: Capacity up to 450m 3 /h (1540USgpm) Head up to 150m (280feet) Speed up to 2950/3550rpm Pump Sizes: DN 25 up
More informationCALCULATION OF BOWL HEAD OR DISCHARGE HEAD
February, 1996 Supersedes 5/95 issue CALCULATION OF BOWL HEAD OR Pressure Gauge hd (Discharge Head) hl (LIFT) hp (Internal Pump Loss) Setting Sump Depth Pump O.A.L. Pumping Water Level hb (Bowl Head) For
More informationFeatures: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
More informationUNIVERSAL PRODUCT LINE: CAST IRON NON-JACKETED PUMPS SERIES DESCRIPTION TABLE OF CONTENTS RELATED PRODUCTS OPERATING RANGE:
Page 1401.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features (124A/AE, 4124A/AE, 324A, 4324A)...4
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationXFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
More informationCombiChem. Centrifugal pumps according to ISO 5199 and ISO 2858 / EN (DIN 24256)
CombiChem Centrifugal pumps according to ISO 5199 and ISO 858 / EN 858 (DIN 456) The SPX Johnson Pump Combi system is a modular programme of single stage CombiChem No limits to reliability! centrifugal
More informationTHOMAS DREDGE PUMP RANGES
THOMAS DREDGE PUMP RANGES Pump Technologies Thomas Dredge The Metso Thomas Dredge Pumps are designed for hydraulic dredging and mining applications. These rugged pumps feature extra heavy metal sections
More informationGoulds Severe Duty Slurry Pump
Goulds 5500 Severe Duty Slurry Pump 5500 Proven leadership in mining and mineral processing Proven Leadership 100 years of slurry pumping experience. Many industry firsts including: hard metal slurry pump,
More informationThe Orion Series of Heavy & Mining Duty Horizontal Slurry Pumps
Slurry Pumps www.metsominerals.com/pumps The Orion Series of Heavy & Mining Duty Horizontal Slurry Pumps The Orion Series of Heavy and Mining Duty Horizontal Slurry Pumps Horizontal Pumps The Metso Heavy
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationTKL. Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump. Experience In Motion
TKL Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump Experience In Motion 1 The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
More informationPerformance curves. Performance dare To compare
Performance curves Performance dare To compare table of contents Pump Size RPM PAGE # 1 1/2 x 1-6AA 1800 1 3600 1 3 x 1 1/2-6AB 1800 1 3600 1 3 x 2-6AC 1800 1 3600 1 LF 1 1/2 x 1-8AA 1800 2 3600 2 1 1/2
More informationUNIVERSAL PRODUCT LINE: STAINLESS STEEL JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
UNIVERSAL PRODUCT LINE: SERIES 227A, 4227A, 327A, 4327A Section 1702 Page 1702.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable
More informationEnd suction back pull-out pumps for general industry, mining, rural and building services
End suction back pull-out pumps for general industry, mining, rural and building WHY COMPROMISE? The TKL KL-ISO end suction, back pull-out pump range is anything but ordinary it is the result of an intensive
More information900 Series Split Case Fire Pump Systems
BULLETIN 900/REV. E 900 Series Split Case Fire Pump Systems MODEL 481 MODEL 483 FM Approved U L Listed motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48
More informationSeries 4600F. HSC Fire Pumps & Packaged Systems
Series 4600F HSC Fire Pumps & Packaged Systems FILE NO: F43.11 DATE: May 26, 2008 SUPERSEDES: F43.11 DATE: Dec. 15, 2007 Series 4600F Series 4600F - Truly Superior The Series 4600F, drawing on over 100
More informationType BBT / BBT-D Pumps API610 9 th Ed. (ISO 13709) BBT-BBTD Sales Presentation.ppt / 1
API610 9 th Ed. (ISO 13709) BBT-BBTD Sales Presentation.ppt / 1 API610 9 th Ed. (ISO 13709) BBT single suction, 2 stage radially split BBT-D double suction, 2 stage radially split BBT-BBTD Sales Presentation.ppt
More informationES-ISO ES-NEW GENERATION BACK PULL-OUT END SUCTION PUMPS
ES-ISO ES-NEW GENERATION BACK PULL-OUT END SUCTION PUMPS Conforms to ISO 2858 Conforms to ISO 5199 Optimized for capacity Efficiency as per Hydraulic Institute & Europump Norms Many product variants -
More information