OrificeMaster Specifications
|
|
|
- Elijah Hawkins
- 5 years ago
- Views:
Transcription
1 Issue/Rev. 0.2 (10/06) Single Chamber Orifice Fittings OrificeMaster Specifications Bulletin SSOR005 FMC Technologies Measurement Solutions Orifice- Master Single Chamber Orifice Fitting is manufactured to offer the ultimate in economy, measurement accuracy and safety. It is designed to provide regularly scheduled orifice plate inspections when it is possible to isolate the fitting from the flow stream or system. Features Safety All OrificeMaster fittings are engineered and manufactured to ensure complete safety to the operator. Before delivery, each fitting is inspected and pressure tested under strict guidelines to meet all pressure requirements. Designed to provide maximum safety to the operator during operation, service and inspection. The slip-lock design prevents cover plate blow-off in the event the line has not been depressurized. Accuracy Tested for positive plate sealing, pressure tap integrity, seal protrusion and eccentricity. Machined metal carrier provides positive alignment of the orifice plate while eliminating plate deflection and seal protrusion into the flow path. Operation/Maintenance The OrificeMaster offers both cost and time saving opportunities to the operator. Simple operating procedures allows horizontal or vertical installation in all sizes with no changes to the fitting. All parts can be replaced without removing the fitting from the line. Available in a variety of materials to meet specific service requirements. Applications Orifice fittings are an economical and accurate way of measuring the flow of natural gas applications including: Gas production and gathering systems Gas transmission High pressure gas injection Fuel gas Industrial process systems 2" thru 6" OrificeMaster Single Chamber Orifice Fitting Operating Specifications Size 1 2" thru 24" Pressure Class 2 ANSI 150, 300, 600, 900, 1500, 2500 End Connections Weld by Weld Flange by Flange Flange by Weld Flange designed in accordance with ANSI B16.5. Raised Face standard 150# - 600#, RTJ standard 900# and above, other Flange Facings available on request. Working Pressure psi (kpa) 3 ANSI Class (1,965) ANSI Class (5,102) ANSI Class 600 1,480 (10,205) ANSI Class 900 2,220 (15,307) ANSI Class ,705 (25,545) ANSI Class ,170 (42,540) Operating Temperature Range -20 F to 250 F (-29 C to 121 C) for 2" through 24" ANSI Class 150, 300 and Consult factory for additional sizes. 2 All pressure ratings not available in all sizes. 3 Maximum working pressure at 100 F (38 C). The Most Trusted Name In Measurement
2 Standard Materials of Construction Sizes 2" 6" Body Casting: A 216 WCC Carbon Steel Carrier: 304SS Seal Rings: 304SS Cover Plate: 304SS Cover Plate Clamp Bar: 304SS O-Rings: Viton External Bolting: A193-B7, Zinc plated Orifice Plate: 316SS (when ordered with fitting) Other materials available on request. Sizes 8" 24" Body Casting: A 352 LCC Carbon Steel Carrier: ASTM A516 Gr 70 Seal Rings: ASTM A516 Gr 70 Cover Plate: ASTM A516 Gr 70 Cover Plate Clamp Bar: ASTM A516 Gr 70 O-Rings: Viton External Bolting: A320-L7 Zinc plated Orifice Plate: 316SS (when ordered with fitting) Other materials available on request. Design Code ASME B31.8 Gas Transmission and Distribution Piping. NACE MR for Pressure Bearing Components. Bolting will be NACE Class III-Non-Exposed bolting. Also in compliance with: ASME B31.1 Power Piping. ASME B31.3 Process Piping. Measurement Standards In compliance with the latest edition: AGA Report No. 3, American Gas Association API 14.3, American Petroleum Institute GPA , Part 2, Gas Processors Association BS/EN/ISO , Applicable to fittings 4 and larger Body Styles 2" 6" OM Flangeweld Raised Face 8" or larger OM 8" or larger OM Flange Flange Raised Face 2" 6" OM Weld Neck Page 2 SSOR005 Issue/Rev. 0.2 (10/06)
3 Dimensions OrificeMaster Orifice Fittings 2" 6" (Flangeweld) R R O H J P 1/2" NPT Tap Holes (Both Sides) F SA216 WCC Q G S 1/2" NPT Drain D B C A - Bore size to be specified by customer K - Number of studs L - Diameter of studs M - Length of studs N - Diameter of bolt circle O - Clearance to remove carrier S - Dowel pin holes not provided on the 6" fitting and for the 2" through 4" ANSI 600 fittings Size B C D E F G H J K L M N O P Q R ANSI Pressure Note: Dimensions inches to the nearest tenth and independently dimensioned from respective engineering drawings. Issue/Rev. 0.2 (10/06) SSOR005 Page 3
4 Dimensions OrificeMaster Orifice Fittings 2" 6" (Weld Neck) I I F G 1/2" NPT Tap Holes (Both Sides) SA216 WCC E H 1/2" NPT Drain B D C A - Bore size to be specified by customer F - Clearance to remove the carrier Size B C D E F G H I ANSI Pressure Note: Dimensions inches to the nearest tenth and independently dimensioned from respective engineering drawings. Page 4 SSOR005 Issue/Rev. 0.2 (10/06)
5 Dimensions OrificeMaster Orifice Fittings 8" - 24" (Flanged, Flangeweld, and Weld Neck 4 ) Note: Dimensions inches to the nearest tenth and independently dimensioned from respective engineering drawings. A - Bore size to be specified by customer J - Number of bolts or studs K - Size of bolts or studs L - Length of bolts Cast Steel Class PSI (Gage) M.A.W.P. 5 Size B C D E F G H J K L M N O P Q R Y Wt CF CF CF CF CF CF CF CF Cast Steel Class PSI (Gage) M.A.W.P. 5 Size B C D E F G H J K L M N O P Q R Y Wt CF CF (FF) (FF) (FW) (FW) CF CF CF CF CF CF CF - Consult Factory Notes: 1 Flow indicated is recommended, although direction of flow is optional. 2 Plate thickness: 1/8" for line sizes 6 ", 1/4" for line sizes 8" through 14", 3/8" for line sizes 16" through 20 ", 1/2" for 24" line size. 3 Pressure taps 1/2" standard pipe threads. 4 Consult factory for weld neck fittings larger than 24". 5 Maximum Allowable Working Pressure. Issue/Rev. 0.2 (10/06) SSOR005 Page 5
6 Dimensions OrificeMaster Orifice Fittings 8" - 24" (Flanged, Flangeweld, and Weld Neck 4 ) Note: Dimensions inches to the nearest tenth and independently dimensioned from respective engineering drawings. A - Bore size to be specified by purchaser J - Number of bolts or studs K - Size of bolts or studs L - Length of bolts Cast Steel Class PSI (Gage) M.A.W.P. 5 Size B C D E F G H J K L M N O P Q R Y Wt CF CF CF CF CF CF CF CF Cast Steel Class PSI (Gage) M.A.W.P. 5 Size B C D E F G H J K L M N O P Q R Y Wt. 8 Consult Factory for Dimensions CF CF 14 thru Consult Factory for Dimensions 24 CF - Consult Factory Cast Steel Class PSI (Gage) M.A.W.P. 5 Notes: 1 Flow indicated is recommended, although direction of flow is optional. 2 Plate thickness: 1/8" for line sizes 6 ", 1/4" for line sizes 8" through 14", 3/8" for line sizes 16" through 20 ", 1/2" for 24" line size. 3 Pressure taps 1/2 inch standard pipe threads. 4 Consult factory for weld neck fittings larger than 24". 5 Maximum Allowable Working Pressure. 6 Consult factory for orifice fittings higher than 1500 ANSI Class. Page 6 SSOR005 Issue/Rev. 0.2 (10/06)
7 Issue/Rev. 0.2 (10/06) SSOR005 Page 7
8 Revisions included in SSOR005 Issue/Rev. 0.2 (6/06): Page 3-6: Revised Material of Construction and Dimensions. The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect. Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect. Headquarters: 500 North Sam Houston Parkway West, Suite 100 Houston, TX USA, Phone: +1 (281) , Fax: +1 (281) Gas Measurement Products: Houston, TX USA +1 (281) Thetford, England +44 (1842) Kongsberg, Norway +47 (32) Buenos Aires, Argentina +54 (11) Integrated Measurement Systems: Corpus Christi, TX USA +1 (361) Kongsberg, Norway +47 (32) San Juan, Puerto Rico (787) United Arab Emirates, Dubai +971 (4) Liquid Measurement Products: Erie, PA USA +1 (814) Los Angeles, CA USA +1 (310) Slough, England +44 (1753) Ellerbek, Germany +49 (4101) Barcelona, Spain +34 (93) Moscow, Russia +7 (495) Melbourne, Australia +61(3) Visit our website at Beijing, China +86 (10) Singapore Chennai, India +91 (44) Printed in U.S.A. 4/02 FMC Technologies Measurement Solutions, Inc. All rights reserved. SSOR005 Issue/Rev. 0.2 (10/06)
Form No. P Meter, PD Model SD, ASD, SF, or ASF-4, 4R, 4V, or 4RV-NF Parts List
Form No. P0541.03 Meter, PD Model SD, ASD, SF, or ASF-4, 4R, 4V, or 4RV-NF Parts List Issue/Rev. 0.3 (3/01) Bulletin P0541.03 SD and ASD Models The Most Trusted Name In Measurement SD or ASD SF or ASF
Smith Meter AccuLoad III AccuLoad III-S and N4 Hardware Worksheet
Electronic Preset Delivery System Smith Meter AccuLoad III AccuLoad III-S and N4 Hardware Worksheet Issue/Rev. 0.2 (9/07) Bulletin AB06050 This worksheet is being provided to ensure that the AccuLoad III-S
Non Ferrous Aircraft Fueling Meters
Issue/Rev. 0.3 (6/02) Smith Meter TM PD Rotary Vane Meter Non Ferrous ircraft Fueling Meters Specifications Bulletin SS01009 The Smith Meter TM ircraft Refueling Meters are non ferrous, single case, rotary
Issue/Rev. 0.3 (2/04) Bulletin P
Form No. P0906.03 E-Type Transmitter Parts List Issue/Rev. 0.3 (2/04) Bulletin P0906.03 (Previous Design) Switch and Network Assembly The Switch and Network Assembly is no longer available. To replace
Electronic Preset Delivery System Smith Meter AccuLoad III. Vapor Recovery. Vapor Recovery System. Overview
Electronic Preset Delivery System Smith Meter AccuLoad III Vapor Recovery Issue/Rev. 0.0 (5/11) Bulletin AB06073 Vapor Recovery System In AccuLoad III.net firmware revision 11.16, a new feature was implemented
Densitometers L-Dens 427F Ex Density Sensor Specifications
Issue/Rev. 0.1 (2/12) Densitometers L-Dens 427F Ex Density Sensor Specifications Bulletin SS04001E The L-Dens 427F Ex Density Sensor combines an accuracy of 1 x 10-4 g/cm 3 in a compact design. Continuous
Model G6-S3. Repeatability ±0.02%
Issue/Rev. 0.6 (2/07) Smith Meter TM PD Rotary Vane Meter 6" Steel Model G6 Specifications Bulletin SS01014 The Smith Meter TM Model G6 Meter is a 6", double-case, straight-through (S3 through S8) or angle-type
Tools, Mechanical. All or Multiple Products. Parts List. Feeler Gauges. Spiders and Bushings. Feeler Gauge Extension Rod. Cam Setting Bushing
Issue/Rev. 0.1 (9/12) All or Multiple Products Tools, Mechanical Parts List Bulletin PO0A001 Spiders and Bushings Feeler Gauges Locates rotor assembly while obtaining blade tip and block clearances on
Smith PD Rotary Vane Meters F4 PRIME Cover Field Retrofit Procedure Service Bulletin
Smith PD Rotary Vane Meters F4 PRIME Cover Field Retrofit Procedure Service Bulletin Issue/Rev. 0.1 (11/02) Bulletin SV01009 Tools and Parts Required P/N 554583-001, Parts kit for F4 PRIME retrofit P/N
Orifice Fittings and Meter Tubes
Smith Meter TM Issue/Rev. 0.0 (9/06) Orifice Fittings and Meter Tubes Technical Paper Bulletin TPOG001 Introduction Throughout the oil and gas industry, there stems the need for accurate, economical measurement
Smith Meter TM Turbine Meters Models 3" Through 16" MV Series Service
Issue/Rev. 0.1 (1/98) Smith Meter TM Turbine Meters Models 3" Through 16" MV Series Service Bulletin MN02010 Contents Section 1 General Information... Page 2 Return Procedures... Page 2 Section 2 Service...
PRIME 4 Service. Smith Meter Rotary Vane Meters. Contents
Smith Meter Rotary Vane Meters PRIME 4 Service Issue/Rev. 0.4 (7/11) Bulletin MN01041 Contents Trouble Shooting... Page 2 Genuine Smith Meter Parts... Page 2 Special Tools and Fixtures... Page 2 Disassembly
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7 Parts List Bulletin PO01018 Issue/Rev 0.1 (7/13) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 Page 2 SS01018 Issue/Rev.
Flow Conditioners. We put you first. And keep you ahead. FEATURES OPTIONS. Bulletin SS02007 Issue/Rev. 0.9 (10/14)
SPECIFICATIONS MEASUREMENT SOLUTIONS Flow Conditioners Bulletin SS02007 Issue/Rev. 0.9 (10/14) We put you first. And keep you ahead. Smith Meter TURBINE METERS Smith Meter Flow Conditioners optimize turbine
Smith Meter PD Meters 3" Steel Model E3
Smith Meter PD Meters 3" Steel Model E3 Specifications Bulletin SS01016 Issue/Rev 1.0 (8/13) The Smith Meter Model E3 is a 3", double-case, straight-through (S1 through S7) or angle-type (A1 and A3), rotary
Smith Meter TM Turbine Meters Models 4" Through 24" Sentry TM Series. Service. Contents
Smith Meter TM Turbine Meters Models 4" Through 24" Sentry TM Series Service Issue/Rev. 0.3 (8/02) Bulletin MN02004 Contents Section 1 General Information... Page 2 Return Procedures... Page 2 Section
Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List
Issue/Rev. 0.0 (1/14) Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List Bulletin PO01023 *For meters which began shipping in 1993 to current. For meters shipped prior to
Additive Injectors. AccuPlus. Maintenance. The Most Trusted Name In Measurement
Additive Injectors AccuPlus Issue/Rev. 0.0 (11/12) Maintenance Bulletin MN05003E The Most Trusted Name In Measurement Caution The default or operating values used in this manual should not be construed
3" Steel Model E3. We put you first. And keep you ahead.
SPECIFICATIONS MEASUREMENT SOLUTIONS 3" Model E3 Bulletin SS01016 Issue/Rev. 1.1 (2/15) We put you first. And keep you ahead. SMITH METER PD METERS The Smith Meter Model E3 is a 3", double-case, straightthrough
6" Steel Model G6. Smith Meter Rotary Vane PD Meters. Features. Operating Specifications Maximum Flow Rate. Options
SPECIFICATIONS 6" Steel Model G6 Bulletin SS01014 Issue/Rev. 1.0 (4/18) Smith Meter Rotary Vane PD Meters The Smith Meter Model G6 Meter is a 6", double-case, straight-through rotary vane type positive
Transmitter, Model UPT
Form No. P0907.05 Transmitter, Model UPT Parts List Issue/Rev. 0.5 (5/11) Bulletin P0907.05 Universal Pulse Transmitter 554665-0-1X Single Shaft Design The Most Trusted Name In Measurement Universal Pulse
Dual Chamber Orifice Fitting
Dual Chamber Orifice Fitting Sure Shot Dual Chamber Orifice Fitting 1 11 2 3 10 4 9 8 5 7 6 1. Top Clamping Bar Gasket: Seals easily by tightening square head clamping bar screws. Non- Asbestos flat gasket
Meter, PD Series, K12-S1, S3, S5, S6 and S7
PARTS LIST Meter, PD Series, K12-S1, S3, S5, S6 and S7 Bulletin PO01018 Issue/Rev. 0.4 (3/18) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 2 Bulletin PO01018 Issue/Rev. 0.4 (3/18) Item
MV Series. We put you first. And keep you ahead. SMITH METER TURBINE METERS FEATURES OPERATING SPECIFICATIONS. Bulletin SS02016 Issue/Rev. 1.
SPECIFICATIONS MEASUREMENT SOLUTIONS MV Series Bulletin SS02016 Issue/Rev. 1.7 (9/14) We put you first. And keep you ahead. SMITH METER TURBINE METERS The Smith Meter MV Series Turbine Meter is intended
Smith Meter TM PD Rotary Vane Meters F4-S1/A1-S3/A3 PRIME Upgrade Upgrade and Service
Issue/Rev. 0.2 (3/01) Smith Meter TM PD Rotary Vane Meters F4-S1/A1-S3/A3 PRIME Upgrade Upgrade and Service Bulletin MN01039 Contents Section 1 General Information... Page 2 Section 2 Meter Disassembly
Expanding Plug Valve
Expanding Plug Valve Expanding Plug Valve Our expanding plug valve is designed for applications where positive shut-off, verifiable zero-leakage and double block and bleed (DBB) capabilities are required.
MV Series. Smith Meter Turbine Meters. Features. Operating Specifications SPECIFICATIONS. Bulletin SS02016 Issue/Rev. 2.0 (2/18)
SPECIFICATIONS MV Series Bulletin SS02016 Issue/Rev. 2.0 (2/18) Smith Meter Turbine Meters The Smith Meter MV Series Turbine Meter is intended for the measurement of crude oils and other products having
Model DE-3 Air Release Heads Parts List
Issue/Rev. 0.0 (1/14) Smith Meter Air Eliminator Model DE-3 Air Release Heads Parts List Bulletin MN03021 Contents Section 1 Introduction... Page 2 Principle of Operation... Page 2 Section 2 Installation...
Models F4-V1, G6-V1 and G6-V3
Issue/Rev. 0.3 (2/04) Model Number Smith Meter TM Vertical Rotary Meters Models F4-V1, G6-V1 and G6-V3 Serial Number Service Bulletin MN01034 Contents Section 1 Foreword... Page 2 Section 2 Description...
Masoneilan * Series
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * 80000 Series Three-Way Control Valves Combining and Diverting Service 2 GE Oil & Gas Table of Contents Features...3 Numbering System...4 Ratings/Connections...4
Genesis Series 2" and 3" Steel Meters
SPECIFICATIONS Genesis Series 2" and 3" Steel Meters Bulletin SS01060 Issue/Rev. 1.0 (2/17) SMITH METER PD METERS TechnipFMC Smith Meter Genesis Series 2" and 3" PD meter is a single case, positive displacement,
Masoneilan * Series Three-Way Control Valves Combining and Diverting Service
Technical Specifications Rev.C - 08/2017 Masoneilan * 80000 Series Three-Way Control Valves Combining and Diverting Service BHGE Data Classification : Public Contents Features 3 Numbering System 4 Ratings/Connections
Masoneilan* Series Double Ported Globe Valve
GE Oil & Gas Technical Specifications Rev.B - 0/2017 Masoneilan* 10000 Series Double Ported Globe Valve GE Data Classification : Public Table of Contents Numbering System...2 General Data...2 Temperature
10000 Series Control Valves
GE Energy Technical Specifications 07/2012 Masoneilan * Valves 000 Series Control Valves ouble Ported Globe Valves Table of Contents Numbering System...2 General ata...2 Temperature Range / Seat Leakage...3
Smith Meter Truck Meter Packages Specifications
Issue/Rev. 0.4 (8/12) P Meter Smith Meter Truck Meter Packages Specifications ulletin SS01095 TP (Ticket Printer) LN (Large Numeral ounter) Preset ounter Air Eliminator/ Strainer Faucet P Meter Smith Meter
Bore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt
Specification Data CH /10. Putting You In Control Series. Double Ported Globe Valves
Putting You In Control Specification ata CH000 11/ 000 Series ouble Ported Globe Valves resser Masoneilan 000 Series ouble Ported Globe Valves 2 resser Masoneilan Table of Contents Features...1 Numbering
Smith Meter AccuLoad IV-QT Hardware Worksheet
APPLICATION BULLETIN Smith Meter AccuLoad IV-QT Hardware Worksheet Bulletin AB06213 Issue/Rev. 0.0 (4/17) This worksheet is being provided to ensure that the AccuLoad IV-QT hardware contains enough I/O
Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526. Specification Data CY /10
Putting You In Control Specification ata CY525-526 06/10 Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 Pressure Reducing, Back Pressure and ifferential Pressure Control Pressure Regulators
Transmitter, Model UPT
PARTS LIST Transmitter, Model UPT Bulletin PO01056 Issue/Rev. 0.0 (6/17) Universal Pulse Transmitter 554665-0-1X Single Shaft Design Item Description Qty. Part Number 1 Bearing, Sleeve... 2 642228-450
Micro Valve. Quick, Sure Response with Design Adaptability. Features and Benefits. Applications. Dependable Performance SPECIFICATIONS / PARTS LIST
SPECIFICATIONS / PARTS LIST Micro Valve Bulletin SSIN064 Issue/Rev. 0.0 (2/18) Since its introduction in 1956, Micro Valve has provided successful service through thousands of applications. This makes
FPD220 meter 2 di Dual-chamber orifice fitting with double isolation
Data sheet DS/FPD220 EN FPD220 meter 2 di Dual-chamber orifice fitting with double isolation Measurement made easy Safety by design Double isolation with visible proofing mechanism meets HSG253 Category
Specification Data CF /10. Putting You In Control. II Series. Camflex. Rotary Control Valves
Putting You In Control Specification Data CF35002 03/10 Camflex II 35002 Series Rotary Control Valves Camflex II 35002 Series Rugged, All Purpose Rotary Control Valves 2 Dresser Masoneilan Table of Contents
35002 Series Camflex * II Rotary Control Valves
GE Oil & Gas Technical Specifications 09/2012 Masoneilan * Valves 35002 Series Camflex * II Rotary Control Valves The 35002 Series Camflex II Eccentric Plug Rotary Control Valve features an extension bonnet,
Fisher Z500 Severe Service Ball Valves
Z500 Ball Valves D099X0 Product Bulletin 5.:Z500 April 06 Fisher Z500 Severe Service Ball Valves This bulletin covers Fisher NPS / 6 Z500 Severe Service Ball Valves. The Z500 severe service ball valve
Masoneilan* Series Camflex* II
Technical Specifications Rev. C - 0/208 Masoneilan* 35002 Series Camflex* II Rotary Control Valves Complete line of eccentric plug control valves effectively combining enhanced control performance, simplicity
Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
ORIFICE PLATES, FLANGES FLOW NOZZLES, VENTURI TUBES AND ACCESSORIES
ORIFICE PLATES, FLANGES FLOW NOZZLES, VENTURI TUBES AND ACCESSORIES INTERNATIONAL METAL ENGINEERING International Metal Engineering Orifice Plates A t Model 785 Orifice Plate is a differential pressure
Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30
Large ET and ED Valves Product Bulletin Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30 Fisher NPS 12 through 30 CL150 through ED/EWD and ET/EWT series control valves are used for either throttling
Masoneilan* Series Direct-Operated, Pressure Reducing Regulator
GE Oil & Gas Technical Specifications 03/2016 Masoneilan* 171-172 Series Direct-Operated, Pressure Reducing Regulator GE Data Classification : Public ing System 1st 2nd 3rd 1st 2nd 3rd 4th Option 1 7 X
Masoneilan* Series Actuators Spring Diaphragm and Differential Pressure for use with 525, 526, 535H and 536H Regulators
GE Oil & Gas Technical Specifications 02/2016 Masoneilan* 10900 Series Actuators Spring Diaphragm and Differential Pressure for use with 525, 526, 535H and 536H Regulators GE Data Classification : Public
Consolidated* Valves 1511 Series Safety Valve
Technical Specifications Rev. B - 10/2018 Consolidated* Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well as
Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30
Large ET and ED Valves Product Bulletin Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30 Fisher NPS 12 through 30 CL150 through ED/EWD and ET/EWT series control valves are used for either throttling
FPD201 Single-chamber orifice fitting
Operating instructions OI/FPD201 EN FPD201 Single-chamber orifice fitting Measurement made easy Introduction ABB's FPD201 single-chamber orifice fitting is a proven system for safely and quickly inspecting
Specification Data CY /10. Putting You In Control Series Actuators. for use with 525, 526, 535H and 536H Regulators
Putting You In Control Specification Data CY10900 06/10 10900 Series Actuators for use with 525, 526, 535H and 536H Regulators Dresser Masoneilan 10900 Series Actuators for use with 525, 526, 535H and
Instrumentation Products. Schneider DirectMount Systems
Instrumentation Products Schneider DirectMount Systems Introduction Introduction Natural Gas Measurement - Best Practices Field research and testing conducted by Southwest Research in San Antonio, Texas
Technical Specifications 11/2014. GE Oil & Gas. Series Texsteam* Electric Driven Injection Pump. GE Data Classification : Public
GE Oil & Gas Technical Specifications 11/2014 Series 2500 Texsteam* Electric n Injection Pump GE Data Classification : Public Contents Product Features...1 Options:...1 Model Designation...1 Gear Reducer
Liquid Turbine Flowmeters
MEASUREMENT SYSTEMS NUFLO Liquid Turbine Flowmeters Accurate Flow Measurement NuFlo developed its first flowmeter for oilfield applications in 1957. The meter incorporated a tungsten-carbide shaft and
SERIES 835 PROCESS-RATED CLASS 150 WAFER-SPHERE HIGH-PERFORMANCE BUTTERFLY VALVES
SERIES 835 PROCESS-RATED CLASS 150 WAFER-SPHERE HIGH-PERFORMANCE BUTTERFLY VALVES Series 835 process-rated ANSI Class 150 high-performance Wafer-Sphere butterfly valves are an excellent cost-effective
Masoneilan* 87/88 Series
Technical Specifications 11/2017 Masoneilan* 87/88 Series Pneumatic Multi-Spring Diaphragm Actuators Actuator air action can be changed in the field for increased flexibility and reduced inventory. BHGE
Masoneilan* Series SteamForm*
Technical Specifications 05/2018 Masoneilan* 84003 Series SteamForm* Steam Conditioning Valves Excellent noise control, temperature control, and fast operation while maintaining smooth flow control and
BALL VALVES 4Evergreen Valve
BALL VALVES 4Evergreen Valve 4E represents Excellent quality, Excellent delivery, Excellent service and all at an Excellent price. 4E valve was founded by a group of enthusiastic people with more than
Masoneilan* 215X1 Series Control Valve
GE Oil & Gas Technical Specifications 05/2013 Masoneilan* 215X1 Series Control Valve UOP Lock Hopper Over Travel Control Valves Table of Contents Features...3 General Data...4 Numbering System...5 Temperature
Wellhead Valves. DHV Industries,Inc. DHV Valve Company Inc.
DHV Industries,Inc. 3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A. Call TollFree: (887) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com
Fisher YD and YS Control Valves
YD and YS Valves Product Bulletin Fisher YD and YS Control Valves Fisher YD and YS three-way cage-guided valves are designed for throttling or flow-switching (on-off) service, and are available in the
SUNNDA CORPORATION. Pressure Control Equipment. Boost Your Bottom Line! Sunnda Corporation
SUNNDA CORPORATION Boost Your Bottom Line! Pressure Control Equipment Sunnda Corporation 4543 Brittmoore Road, Houston, TX 77041 USA Phone: +1-713-849-5678 Fax: +1-713-849-5687 E-mail: sales@sunnda.com
Bulletin: Floating Ball Valve. Tartarini Floating Ball Valve. Introduction. Features and Benefits
Tartarini Floating Ball Valve Bulletin: Floating Ball Valve May 2011 Figure 1. Tartarini Floating Ball Valve Introduction Tartarini Floating Ball Valve is a general-purpose valve. It is used for long range
Instrumentation & Piping valves
Instrumentation & Piping valves Monoflange valves Plug valves Large bore ball valves Injection & sampling valves Double block & bleeds Various instrumentation valves DELIVERY PROGRAM www.imperialvalve.nl
Masoneilan* 51/52/53 Series
Technical Specifications Rev.E - 01/2018 Masoneilan* 51/52/53 Series Cylinder Actuator BHGE Data Classification: Public Conversion Table All the USCS values are converted to metric values using the following
Practical Guidelines for Specifying Orifice Fittings
Daniel White Paper February 2015 - Page 1 Practical Guidelines for Specifying Orifice Fittings This white paper provides detailed information on how to correctly specify an orifice fitting to meet oil
TRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
21000 Series. Masoneilan* Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities
GE Oil & Gas Technical Specifications 02/2016 Masoneilan* 21000 Series Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities Table of Contents Numbering System...3
P R E C I S I O N E N G I N E E R E D C H E C K V A L V E S
P R E C I S I O N E N G I N E E R E D C H E C K V A L V E S SERIES T WAFER PATTERN CHECK VALVE HIGH PERFORMANCE HIGH FLOW LARGE UNOBSTRUCTED FLOW PATH RUGGED, HIGH INTEGRITY CONSTRUCTION Series T Installation
Engineered Valves For Pipeline Service Application
Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru
Fisher V250 Rotary Control Valve
V250 Valve Product Bulletin Fisher V250 Rotary Control Valve The V250 Hi Ball rotary control valve is designed for heavy duty throttling and on off applications. Depending on size, this valve installs
87/88 Pneumatic Multi-Spring Diaphragm Actuators
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Valves 87/88 Pneumatic Multi-Spring Diaphragm Actuators Actuator air action can be changed in the field for increased flexibility and reduced
Liquid Turbine Flowmeters
NuFlo Liquid Turbine Flowmeters Accurate Flow Measurement NuFlo developed its first flowmeter for oilfield applications in 1957. The meter incorporated a tungsten-carbide shaft and bearing to withstand
Masoneilan* Series Eccentric Rotary Control Valve with PFA Liner
Technical Specifications 10/2017 Masoneilan* 31000 Series Eccentric Rotary Control Valve with PFA Liner BHGE Data Classification : Public Contents Features...3 Numbering System...4 General Data...5 Connections...6
Series 7100 Flow-Lift Piston Check Valve
Series 7100 Flow-Lift Piston Check Valve Award-Winning Design: Feature-packed valve provides solutions for gas, air or liquid systems The Norriseal Series 7100 Piston Check Valve* is designed for the prevention
TRANSMITTER ATTACHES TO THIS SURFACE
FIELD DEVICES - PRESSURE Product Specifications Logo PSS 3-5A1 B Model IFOA Integral Flow Orifice Assembly Used with I/A Series or Pneumatic d/p Cell Transmitters PNEUMATIC TRANSMITTER TRANSMITTER ATTACHES
Fisher V500 Rotary Control Valve
Product Bulletin D100054012 Fisher V500 Rotary Control Valve V500 Valve The Fisher V500 eccentric plug rotary control valve controls erosive, coking, and other hard-to-handle fluids, providing either throttling
Masoneilan* Series Eccentric Rotary Control Valve with PFA Liner
GE Oil & Gas Technical Specifications 08/2016 Masoneilan* 31000 Series Eccentric Rotary Control Valve with PFA Liner GE Data Classification : Public 2 GE Oil & Gas 2016 General Electric Company. All rights
Masoneilan* Series Varipak
GE Oil & Gas Technical Specifications 10/2016 Masoneilan* 28000 Series Varipak Control Valves Precise Microflow Valves with Compact Design and Flexible Capabilities. GE Classification Data : Public Table
P R E C I S I O N E N G I N E E R E D C H E C K V A L V E S
P R E C I S I O N E N G I N E E R E D C E C K V A L V E S SERIES X EXTENDED BODY CECK VALVE PARTS LIST ITEM PART NAME 1 BODY 2 SEAT INSERT 3 FLAPPER 4 SPRING 5 SPRING PIN 6 SEAT SEAL IG PERFORMANCE IG
FUNDAMENTALS OF ORIFICE METERING Ken Embry FMC Measurement Solutions
FUNDAMENTALS OF ORIFICE METERING Ken Embry FMC Measurement Solutions 6677 N. Gessner, Houston, Texas 77040 Throughout the oil and gas industry, there stems the need for accurate, economical measurement
Fisher V150S Slurry Vee-Ball Control Valve
Slurry Vee-Ball Valve Product Bulletin Fisherr V150S Slurry Vee-Ball Control Valve The Fisher V150S Slurry Vee-Ball valve mates with CL150 raised face flanges. Rugged construction, highly wear-resistant
TM SERIES Engineered Valves For Pipeline Service Application
Tech Bulletin Page 0-1 Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt
WHEATLEY Series 500. Fire-Tested Carbon Steel Flanged-End Check Valves
WHEATLEY Series 500 Fire-Tested Carbon Steel Flanged-End Check Valves Table of Contents WHEATLEY SERIES 500 FIRE-TESTED CARBON STEEL FLANGED-END CHECK VALVES API 6D/Drilling Production Features and Materials
ORIFICE PLATE flow meters
ORIFICE PLATE flow meters 1 Differential pressure and pressure loss When a throttle element is interposed in a closed passage of fluid in piping, a difference is produced between the pressure upstream
FLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 600 VERSION
FLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 6 VERSION 1 MBV 27 Issue 12/98 Applications Chemical and petrochemical plants. Oil and gas production. Hydrocarbons. Liquids. Water. Power plants. Suitable
Rosemount 1195 Integral Orifice Primary Element
September 2014 Rosemount DP Flow Rosemount 1195 Integral Orifice Primary Element Rosemount 1195 Integral Orifice Primary Element utilizes a self centering orifice plate design to eliminate installation
Instrumentation Products. Mini Valves and Rupture Disc Holders
Instrumentation Products Mini Valves and Rupture Disc Holders General Features I Mini Valves and Rupture Disc Holders Introduction Rugged Design for long term performance in the most demanding environmental
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 800, 900 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 800 adjustable blowdown, Series 900 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have
CHOKES API 6A & 16C Extreme Service/Drilling Chokes
CHOKES API 6A & 16C Extreme Service/Drilling Chokes Robust Reliable Proven The Standard in Non-Standard Valve Production www.uscortec.com CORTEC Models CX3 and CXE-II Drilling/Extreme Service Chokes CORTEC
Counters, Printers, Preset Counters
SPECIFICATIONS Counters, Printers, Preset Counters Bulletin SS01100 Issue/Rev. 0.3 (10/17) Smith Meter PD Meter Accessories High Capacity and Large Numeral Counters Model 600 and 900 Series Non-Reset CountersModel
Direct Mount Packages
800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated
Double Block & Bleed Plug Valves
Double Block & Bleed Plug Valves ASME Class 150 & 300 50 mm to 750 mm (2 to 30 ) API 6D L&T Valves L&T Valves Limited (Formerly Audco India Limited) is a wholly owned subsidiary of Larsen & Toubro. Backed
Series 50 Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Full port, split body design
Fisher V500 Rotary Globe Control Valve
V500 Valve D100054012 Product Bulletin Fisher V500 Rotary Globe Control Valve The Fisher V500 eccentric plug rotary control valve controls erosive, coking, and other hard-to-handle fluids, providing either
Fisher CV500 Rotary Globe Control Valve
CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent