Transmitter, Model UPT

Transcription

1 Form No. P Transmitter, Model UPT Parts List Issue/Rev. 0.5 (5/11) Bulletin P Universal Pulse Transmitter X Single Shaft Design The Most Trusted Name In Measurement

2 Universal Pulse Transmitter X Item Description Split Shaft Design Qty. Part Number Page 2 P Issue/Rev. 0.5 (5/11)

3 Universal Pulse Transmitter X Single Shaft Design Item Description Qty. Part Number 1 Bearing, Sleeve Coupling Coupling, Drive Cover Cover, Blind Gasket, Counter Base Gasket, Conduit Box Cover Housing Hub Label, Installation Warning, Conduit Opening (Not Shown) Nameplate Nut, Hex, 1/4" @2 O-Ring, PTFE 1, 1/4 x 1/2" Pin, Groove, 1/16 x 5/8" Pin, Groove, 5/64 x 1/2" Screw, 3/8-16 x 1-1/4, Drilled Screw, 3/8-16 X 7/8" Hex. Hd Screw, 1/4 x 1/2" Screw, M x 30 mm Screw, #5-40 x 1/2" Screw, Ground, #6-32 x 1/4" Screw, Nameplate Drive Seal, Lead, and Wire Shaft, Main Electronic Valve Controller Spacer Stud @5 Transmitter Replacement Kit 1000 Pulses/Rev Pulses/Rev Pulses/Rev Pulses/Rev Pulses/Rev Bracket, Terminal Block Connector Plug Head, Connector Label, UPT Connections Nut, Hex, # Screw, #2-56 x Washer, Shim... A/R Washer, Washer, Cup Washer, Lock Wire, Ground Wrench, Allen, 6 mm Metric Recommended stock. A/R As Order using Chart A on page Apply grease (Part No ) to O-ring Apply anti-seize lubricant (Part No ) to all cover mounting Add shims to provide.005/.015" axial See Service Bulletin SV01010 for Transmitter Replacement Kits. R Indicates change since last revision. 1 Polytetrafluoroethylene (PTFE). Issue/Rev. 0.5 (5/11) P Page 3

4 Universal Pulse Transmitter X Split Shaft Design Item Description Qty. Part Number 1 Arm, Torque, UPT Split Shaft Design Bearing, Sleeve 1/4 ID x 1/2 OD x 1" Long Bearing, Sleeve 1/4 ID x 1/2 OD x 1-1/4 Long Coupling, Drive Coupling, Split Shaft Design Cover, Blind Cover, SS-1 Valve Controller w/step Down Cover, Torque Arm Cover, UPT Split Shaft Design Gasket, Counter Base Gasket, For SS1, PST, PPST Housing, UPT Transmitter Machining Hub,.406H Nameplate, UPT Transmitter Nut, 1/4-20 Hexagon O-Ring, 1/4 x 1/ O-Ring, 1/4" x 1/2" Buna Pin, Groove, Type 1, 5/64" Diameter x 1/2" LG Pin, Groove Type E 1/16 Diameter x 5/8 Long Pin, Hairspring Cotter LG Screw, 1/4-20 x 1/2 Hex Soc HD (303 or 304 s.s.) Screw, 3/8-16 x 7/8" Hex HD Screw, 3/8-16 UNC-2A x 1-1/4 HEX Drilled Head Cap Screw, 5-40 x.50 Pan HD Slot, Zinc Plated Screw, #6-32 UNC-2A x.25 Long Pan HD Slot Screw, Cap M2.5 x Screw, Cap M2.5 x 6M Screw, M x 30mm Hex Soc HD Screw, Nameplate Drive Shaft, Lower Shaft, UPT Split Shaft Design Shaft, Upper Shaft, UPT Split Shaft Design Spacer, LEATC/PST/SS-1 Bottom Shaft Design Stud, 1/4-20 M/F @5 Transmitter Replacement Kit 1000 Pulses/Rev Pulses/Rev Pulses/Rev Pulses/Rev Pulses/Rev Bracket, Terminal Block, UPT Connector, Head, 9-pos, 3.81mm Direct Mounting, UL Connector, Plug, 9-pos, 3.81mm, Screw Down, UL Label, Term BLK, 1-10 Consec.,.150" SPG Nut, 2-56 Hex Machine Screw,.06 Thk, 300 s.s Screw, 2-56 x.38 RND Head Slotted, s.s Washer, Cup,.56 OD x.27 ID x.25 Hgt Alum Washer, Flat, 5/8 OD x 17/64 ID x.010 Thk... AR Washer, Flat 5/8 OD.260/.270 ID x.031 THK, s.s Washer, Lock Spring 1/4 Screw.062 Thk Wire, Assy, #18 AWG. Green x 6" w/terminal Wrench, Allen 6mm Recommended stock. A/R As Order using Chart A on page Apply grease (Part No ) to O-ring Apply anti-seize lubricant (Part No ) to all cover mounting Add shims to provide.005/.015" axial See Service Bulletin SV01010 for Transmitter Replacement Kits. Page 4 P Issue/Rev. 0.5 (5/11)

5 Item Description Qty. Part Number Chart A Meter Size Pressure Rating Gearing UPT Input Coupling E3, F4, G6, H8 S1 All E3, F4, G6 A1 All F4, G6 V1 All C2, E3, F4, G6, H8 S3, S5 All SF-4-NF, ASF-4-NF N/A All E3, F4, G6 A3 All SG-6-NF, ASG-6-NF N/A All C2, E3, F4, G6, H8 S6, S7 All JA10, JB10, K12, M16 S3, S5 All JA10, JB10, K12, M16 S6, S7 All UPT Input Gear C2-S1, SC-13 N/A 100% USG C2-S1, SC-13 N/A 100% DEK T-11, I-75, ST-40 N/A 100% USG T-11, I-75, ST-40 N/A 100% DEK T-20, I-150, ST-75 N/A 100% USG T-20, I-150, ST-75 N/A 100% DEK T-40, SD-30, SD-3, SD-3-NF, ST-160 N/A 100% USG T-40, SD-30, SD-3, SD-3-NF, ST-160 N/A 100% DEK Special Application with Manual Calibrator For Meters equipped with a manual calibrator, disregard input coupling. Instead of a coupling, provide UPT Adaptor Kit Issue/Rev. 0.5 (5/11) P Page 5

6 Revisions included in P Issue/Rev. 0.5 (5/11): Total Revision. Editorial Change: 12/13: Item 13 - material reference changed to PTFE. Headquarters: 500 North Sam Houston Parkway West, Suite 100, Houston, TX USA Phone: +1 (281) Fax: +1 (281) Operations: Measurement Products and Equipment: Ellerbek, Germany +49 (4101) 3040 Erie, PA USA +1 (814) Integrated Measurement Systems: Corpus Christi, TX USA +1 (361) Kongsberg, Norway +47 (32) The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect. Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect. Contact information is subject to change. For the most current contact information, visit our website at and click on the Contact Us link in the left-hand column. Printed in U.S.A. 5/11 FMC Technologies Measurement Solutions, Inc. All rights reserved. P Issue/Rev. 0.5 (5/11)