Micro Valve. Quick, Sure Response with Design Adaptability. Features and Benefits. Applications. Dependable Performance SPECIFICATIONS / PARTS LIST
|
|
|
- Theodore Dean
- 5 years ago
- Views:
Transcription
1 SPECIFICATIONS / PARTS LIST Micro Valve Bulletin SSIN064 Issue/Rev. 0.0 (2/18) Since its introduction in 1956, Micro Valve has provided successful service through thousands of applications. This makes choosing the right miniature instrument and control valve a snap. Choose Micro Valve, the best valve to solve liquid, air, and gas service design problems. It absolutely will not leak. With other miniature valves, leakage occurs when flow is redirected from one port to another. But with the Micro Valve, flow is instantly redirected so there is no leakage. Features and Benefits Flow is instantly redirected, so there is no leakage. Unique over-center snap action provides quick, sure response No sliding seals, packing or tight-fitting moving parts to leak or wear out Requires no lubrication; no need to introduce a system lubricator. Applications Pressure switches Level controls Air switch to operate pneumatic tool Pilot operation of main valves Limit switches on cylinder actuated devices Diverting valve used to introduce additive to two independent flow systems Vial or container filling or sampling with instant and dripless shut off Machine shop and assembly area for parts blow off The Micro Valve is a unique miniature valve offering versatility and rugged construction. Quick, Sure Response with Design Adaptability With a unique, over-center snap-action you get a quick, sure response. There are no sliding seals, packing, or tight-fittingmoving parts to leak, wear out or stick. Therefore, no lubricants are required. All models have been tested through several million cycles without maintenance, thus guaranteeing your systems performance. Micro Valves will withstand abrasivebearing fluids. With all ports having some connection, external contaminants cannot enter the units. Dirt and grit will not prevent tight seating and will not cause the valve to stick. Dependable Performance The valve offers sure response, with no neutral position, and no varying time lag between positions. Micro Valves maintains either position without holding force, and cannot be vibrated or jarred out of position. Valve action is full-speed regardless of operator speed or force applied. Trippoint position repeats accurately and is essentially independent of the speed of the external actuating device. Light operating forces are required and not affected by operating pressure or flow rate. Shut-off is bubble-tight up to rated pressures.
2 Product Specifications Operators Straight Handle Plastic Ball Tip Roller Lever Over-Ride Spring Panel Mount *316 F1 *316 F1-178 *316 F1-221 *P316 F Series 3-way 2-position Diameters (Standard) 1/32" or 3/32" ' Pipe Thread Female 1/4" N.P.T. 38 Series 3-way 2 position Diameters 1/8" (Standard) or 3/16" Pipe Thread Female 3/8" N.P.T **316 F2 **316 F2-178 **316 **316 F2-221 *38 F1 *38 F1-178 F3 *38 F1-221 *P38 F1-178 **38 F2 **38 F2-178 **38 F3 **38 F2-221 * Manual return. ** Spring return. Note: Plastic ball tips may be red, black, white, yellow, blue, or green. Specify color when ordering. 2 Bulletin SSIN064 Issue/Rev. 0.0 (2/18)
3 Body Materials Trim Materials Seal Materials Standard Standard Standard Anodized Aluminum, 2024-T3 Seat S.S. Shuttle S.S. Operator S.S. Operator Seal - Neoprene Shuttle Face - Buna-N O Rings - Buna-N Spring S.S. Yoke S.S. Optional Optional Optional Brass 303 or 316 Stainless Steel Polyvinyl Chloride Plexiglass (demo purposes only) * Viton is a trademark of E.I. dupont de Nemours Co. (Inc.) All above in 316 S.S. for 316 Series only All above of Buna-N, Neoprene, or Viton*. Viton* supplied only with (-1 options) vacuum seal. Special seal requests considered. Size (Standard) (Special) 1/32" (Special) 3/32" (Special) 3/32" (Special) 316 Series Maximum Working Pressure Operating Force Straight Handle - Manual Return Approx. 100 PSI 22 Ounces 150 PSI 25 Ounces 250 PSI 22 Ounces 60 PSI 22 Ounces 100 PSI 25 Ounces Straight Handle - Spring Return (Standard) 100 PSI 32 Ounces Lever Operator - Spring Return (Standard) 100 PSI 24 Ounces Size 1/8" (Standard) (Special) 3/16" (Special) 38 Series Maximum Working Pressure Operating Force Straight Handle - Manual Return Approx. 100 PSI 3.5 lbs. 250 PSI 3.5 lbs. 75 PSI 4 lbs. Straight Handle - Spring Return 1/8" (Standard) 100 PSI 4 lbs. Lever Operator - Spring Return 1/8" (Standard) 100 PSI 4.5 lbs. Bulletin SSIN064 Issue/Rev. 0.0 (2/18) 3
4 Product Specifications Quantity Discount 0-9 Net % % % % % 38 Series Micro Valve Three-way, two position, 1/8" orifice, psi, aluminum body, stainless steel working parts, Buna-N shuttle faces and o-ring and neoprene seals. Model Description Part Number 38F1 Straight Handle Operator, Neoprene Seals F1-B-1 Straight Handle Operator, Buna-N Seals, Vacuum Service F1-178 Straight Handle Operator with Plastic Ball Knob F1-221 Straight Handle Operator with Spring Extention F2 Straight Handle, Spring Return F2-178 Straight Handle with Plastic Ball Knob F2-221 Straight Handle with Spring Extention F3 Roller Lever Operator F3-178 Ball Knob Lever Operator xxxx-x-1 Vacuum Service (add suffix -1 to model) Special Size Special 3/16" Size Special Pressure Rating uo to 200 PSI Special Operating Force 1. 38F Model Micro-Valves have female 3/8" NPT connections at all three (3) ports. 2. Standard colors for plastic ball knobs are red, black, yellow, blue and green. Specify color desired. 38 Series Special Price Adders Special Body Materials Brass Polyvinyl Chloride Plexiglass 303 Stainless Steel 316 Stainless Steel Special Seal, Shuttle Face, and O-Ring Materials Neoprene Silicone Rubber Viton A Manifold Plate with 6 - O-Rings, for assembly by customer. Call factory for pricing and availability. Manifold Assembly complete with valves interconnected and ports plugged per customer specifications. Call factory for pricing and availability. *Part numbers apply to standard models only. If any options are selected, disregard part numbers and consult factory. 4 Bulletin SSIN064 Issue/Rev. 0.0 (2/18)
5 316 Series Micro Valve Four-way, two position, orifice, psi, aluminum body, stainless steel working parts, Buna-N shuttle faces and o-rings and neoprene seals Model Description Part Number 316F1-B Straight Handle Operator, Buna-N Seals F1-178 Straight Handle Operator with Plastic Ball Knob F1-221 Straight Handle Operator with Spring Extension F2 Straight Handle, Spring Return F2-178 Straight Handle, Spring Return with Plastic Ball Knob F2-221 Straight Handle, Spring Return with Spring Extension F3 Roller Lever Operator F3-178 Ball Knob Lever Operator P-316F1 Straight Handle Operator, Panel Mounting P-316F1-178 Straight Handle Operator, Panel Mounting with Plastic Ball Knob xxxx-x-1 Vacuum Service (add suffix -1 to model) Special 1/32" Size Special 3/32" Size Stainless Steel Trim Special Pressure Rating up to 250 PSI Special Operating Force F Model Micro Valves have female 1/4" NPT connections at all three (3) ports. 2. Standard colors for plastic ball knobs are red, black, yellow, blue and green. Specify color desired. 316 Series Special Price Adders Special Body Materials Brass Polyvinyl Chloride Plexiglass 303 Stainless Steel 316 Stainless Steel Special Seal, Shuttle Face, and O-Ring Materials Neoprene Silicone Rubber Viton A 416 Series Micro Valve Four-way, two position, orifice, psi, aluminum body, stainless steel working parts, Buna-N shuttle faces and o-rings and neoprene seals. Model Description Part Number 416EF1 Straight Handle Operator, Neoprene Seals EF1-178 Straight Handle Operator with Plastic Ball Knob EF1-221 Straight Handle Operator with Spring Extension EF3 Roller Lever Operator EF3-178 Ball Knob Lever Operator xxxx-x-1 Vacuum Service (add suffix -1 to model) Special 1/32" Size Special 3/32" Size Stainless Steel Trim Special Body Materials (2 x 316 Series Special Body Materials) Special Pressure Rating uo to 250 PSI Special Operating Force EF Model Micro-Valves have female 1/4" NPT connections at all five (5) ports. 2. Standard colors for plastic ball knobs are red, black, yellow, blue and green. Specify color desired. Bulletin SSIN064 Issue/Rev. 0.0 (2/18) 5
6 Operating Range The Micro Valve is available with 1/4" and 3/8" NPT type connections and in orifice sizes from 1/32" to 3/16". They can handle flow ranges from 6.3 to 2535 SCFH for gas applications and.02 to 6.5 gpm for liquid applications. Gas ΔP (psig) Series 316 Micro Valve Gas Flow 1/32" 3/32" Series 38 Micro Valve Gas Flow 1/8" 3/16" , , , , , , , , , , , Note: The above flow rates are for air. To find the flow rate of other gases, divide the flow rate by the square root of the gas s specific gravity. Liquid ΔP (psig) Series 316 Micro Valve Liquid Flow 1/32" 3/32" Series 38 Micro Valve Liquid Flow 1/8" 3/16" Note: The above flow rates are for water. To find the flow rate of other fluids, divide the flow rate by the square root of the fluids s specific gravity. *Standard cubic feet per hour. The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in effect. Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect. Contact information is subject to change. For the most current contact information, visit our website at and click on the Contact Us link in the left-hand column. TechnipFMC.com FMCTechnologies.com/MeasurementSolutions TechnipFMC 2018 SSIN064 Issue/Rev. 0.0 (2/18) TechnipFMC FMC Technologies Measurement Solutions, Inc. 500 North Sam Houston Parkway West, Suite 100 Houston, Texas USA P: USA Operation 1602 Wagner Avenue Erie, Pennsylvania USA P: Germany Operation Smith Meter GmbH Regentstrasse Ellerbek, Germany P:
Meter, PD Series, K12-S1, S3, S5, S6 and S7
PARTS LIST Meter, PD Series, K12-S1, S3, S5, S6 and S7 Bulletin PO01018 Issue/Rev. 0.4 (3/18) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 2 Bulletin PO01018 Issue/Rev. 0.4 (3/18) Item
Smith Meter AccuLoad IV-QT Hardware Worksheet
APPLICATION BULLETIN Smith Meter AccuLoad IV-QT Hardware Worksheet Bulletin AB06213 Issue/Rev. 0.0 (4/17) This worksheet is being provided to ensure that the AccuLoad IV-QT hardware contains enough I/O
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7 Parts List Bulletin PO01018 Issue/Rev 0.1 (7/13) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 Page 2 SS01018 Issue/Rev.
3" Steel Model E3. We put you first. And keep you ahead.
SPECIFICATIONS MEASUREMENT SOLUTIONS 3" Model E3 Bulletin SS01016 Issue/Rev. 1.1 (2/15) We put you first. And keep you ahead. SMITH METER PD METERS The Smith Meter Model E3 is a 3", double-case, straightthrough
Transmitter, Model UPT
PARTS LIST Transmitter, Model UPT Bulletin PO01056 Issue/Rev. 0.0 (6/17) Universal Pulse Transmitter 554665-0-1X Single Shaft Design Item Description Qty. Part Number 1 Bearing, Sleeve... 2 642228-450
Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List
Issue/Rev. 0.0 (1/14) Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List Bulletin PO01023 *For meters which began shipping in 1993 to current. For meters shipped prior to
Flow Conditioners. We put you first. And keep you ahead. FEATURES OPTIONS. Bulletin SS02007 Issue/Rev. 0.9 (10/14)
SPECIFICATIONS MEASUREMENT SOLUTIONS Flow Conditioners Bulletin SS02007 Issue/Rev. 0.9 (10/14) We put you first. And keep you ahead. Smith Meter TURBINE METERS Smith Meter Flow Conditioners optimize turbine
Counters, Printers, Preset Counters
SPECIFICATIONS Counters, Printers, Preset Counters Bulletin SS01100 Issue/Rev. 0.3 (10/17) Smith Meter PD Meter Accessories High Capacity and Large Numeral Counters Model 600 and 900 Series Non-Reset CountersModel
6" Steel Model G6. Smith Meter Rotary Vane PD Meters. Features. Operating Specifications Maximum Flow Rate. Options
SPECIFICATIONS 6" Steel Model G6 Bulletin SS01014 Issue/Rev. 1.0 (4/18) Smith Meter Rotary Vane PD Meters The Smith Meter Model G6 Meter is a 6", double-case, straight-through rotary vane type positive
Genesis Series 2" and 3" Steel Meters
SPECIFICATIONS Genesis Series 2" and 3" Steel Meters Bulletin SS01060 Issue/Rev. 1.0 (2/17) SMITH METER PD METERS TechnipFMC Smith Meter Genesis Series 2" and 3" PD meter is a single case, positive displacement,
Smith Meter PD Meters 3" Steel Model E3
Smith Meter PD Meters 3" Steel Model E3 Specifications Bulletin SS01016 Issue/Rev 1.0 (8/13) The Smith Meter Model E3 is a 3", double-case, straight-through (S1 through S7) or angle-type (A1 and A3), rotary
MV Series. Smith Meter Turbine Meters. Features. Operating Specifications SPECIFICATIONS. Bulletin SS02016 Issue/Rev. 2.0 (2/18)
SPECIFICATIONS MV Series Bulletin SS02016 Issue/Rev. 2.0 (2/18) Smith Meter Turbine Meters The Smith Meter MV Series Turbine Meter is intended for the measurement of crude oils and other products having
Control Valves & Valve Accessories
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Stainless Steel 0- Fully Ported valve with M5 threads available- contact factory Viton is a registered trademark
Smith Meter Truck Meter Packages Specifications
Issue/Rev. 0.4 (8/12) P Meter Smith Meter Truck Meter Packages Specifications ulletin SS01095 TP (Ticket Printer) LN (Large Numeral ounter) Preset ounter Air Eliminator/ Strainer Faucet P Meter Smith Meter
MV Series. We put you first. And keep you ahead. SMITH METER TURBINE METERS FEATURES OPERATING SPECIFICATIONS. Bulletin SS02016 Issue/Rev. 1.
SPECIFICATIONS MEASUREMENT SOLUTIONS MV Series Bulletin SS02016 Issue/Rev. 1.7 (9/14) We put you first. And keep you ahead. SMITH METER TURBINE METERS The Smith Meter MV Series Turbine Meter is intended
Tools, Mechanical. All or Multiple Products. Parts List. Feeler Gauges. Spiders and Bushings. Feeler Gauge Extension Rod. Cam Setting Bushing
Issue/Rev. 0.1 (9/12) All or Multiple Products Tools, Mechanical Parts List Bulletin PO0A001 Spiders and Bushings Feeler Gauges Locates rotor assembly while obtaining blade tip and block clearances on
Model DE-3 Air Release Heads Parts List
Issue/Rev. 0.0 (1/14) Smith Meter Air Eliminator Model DE-3 Air Release Heads Parts List Bulletin MN03021 Contents Section 1 Introduction... Page 2 Principle of Operation... Page 2 Section 2 Installation...
Transmitter, Model UPT
Form No. P0907.05 Transmitter, Model UPT Parts List Issue/Rev. 0.5 (5/11) Bulletin P0907.05 Universal Pulse Transmitter 554665-0-1X Single Shaft Design The Most Trusted Name In Measurement Universal Pulse
Sening MultiFittings. One Stop Shop for Tank Truck Fittings. Advantages:
Sening MultiFittings One Stop Shop for Tank Truck Fittings Sening has been developing and producing tank truck products for over 100 years. Today, Sening offers innovative and customer-oriented solutions
OrificeMaster Specifications
Issue/Rev. 0.2 (10/06) Single Chamber Orifice Fittings OrificeMaster Specifications Bulletin SSOR005 FMC Technologies Measurement Solutions Orifice- Master Single Chamber Orifice Fitting is manufactured
Performance Data. Temperature Range. -20 o to 160 o F 26 Hg to 125 psi. C v Flow Rate (scfm) Fill Time Exhaust. Port.
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-0547 Features Single stem design Compact size Four input options Numerous porting configurations Fully ported
Electronic Preset Delivery System Smith Meter AccuLoad III. Vapor Recovery. Vapor Recovery System. Overview
Electronic Preset Delivery System Smith Meter AccuLoad III Vapor Recovery Issue/Rev. 0.0 (5/11) Bulletin AB06073 Vapor Recovery System In AccuLoad III.net firmware revision 11.16, a new feature was implemented
Densitometers L-Dens 427F Ex Density Sensor Specifications
Issue/Rev. 0.1 (2/12) Densitometers L-Dens 427F Ex Density Sensor Specifications Bulletin SS04001E The L-Dens 427F Ex Density Sensor combines an accuracy of 1 x 10-4 g/cm 3 in a compact design. Continuous
Table of Contents. Page. See Catalog and Product Updates on our Website
2 Table of Contents Page Sapphire Orifice Assemblies... 3-5 Metal Orifice Assemblies - Barb Connections... 6-7 Metal Orifice Assemblies - NPT Connections... 8-9 Metal Orifice Assemblies - Inserts... 10-13
Mini 1. Compact High Flow 3-Way and 4-Way Pneumatic Directional Control Valves
Catalog LX-530 Mini 1 Compact High Flow and Pneumatic Directional Control Valves FEATURES: 3-port or 5-port bodies Manual, Air Pilot, Solenoid or Mechanical Operators Two-position, Single or Dual Actuation
Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves
Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves July 2013 W1094_1 Figure 1. Type Y610A or Y610AP Vacuum Breaker Introduction The Y610A, Y611A, and Y612A Series devices (Figures
Hydraulic Valves Needle Valves
Table of Contents 1 Hydraulic Valves Needle Valves TMN Series FFG 2000 Series FFA 2000 Series 2-3 4-5 6-7 Check Valves C Series 8-9 Flow Controls TMF Series 10-11 Low Pressure Ball Valve S95 NPT Series
Valves, Fittings, and Manifolds Catalog. We make things MOVE
Valves, Fittings, and Manifolds Catalog We make things MOVE We Make Things Move A forward-thinking innovator, Bimba provides industry-leading pneumatic, hydraulic and electric motion solutions that are
Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators
Bulletin 71.4 D0163X012 Type 1808 February 17 Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators Type 1808 Type 1808A Figure 1. Types 1808 and 1808A Pilot-Operated Relief Valves
Flow Limit Safety Shutoff Valves Model 1
Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally
Flowrite 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body
Flowrite 599 Series Three-Way s 1/2 to 2-inch Bronze Body Technical Instructions Document No. 155-185P25 VF 599-4 Description The Flowrite VF 599 Series ANSI Class 250 three-way valves are designed to
ball valves General Purpose Ball Valves
General Purpose Ball Valves Index At a Glance 2 Flomite 71 Series 4 2-Way valves Rotoball 72 Series 9 2-Way valves Ultramite 70 Series 12 2- & 3-Way valves Selectomite 71 & 76 Series 19 3-Way Ball Valves
PRIME 4 Service. Smith Meter Rotary Vane Meters. Contents
Smith Meter Rotary Vane Meters PRIME 4 Service Issue/Rev. 0.4 (7/11) Bulletin MN01041 Contents Trouble Shooting... Page 2 Genuine Smith Meter Parts... Page 2 Special Tools and Fixtures... Page 2 Disassembly
DP Series Specifications
DP Series Specifications DP-10 Port Dimensions Intake & discharge connection: Polypropylene (PPG) Aluminum (ADC-12) Stainless Steel (316) (6 GPM Max.) 3/8" Female NPT 3/8" Female NPT 3/8" Female NPT DP-15
NDP-25 Specifications
NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high-pressure systems. These regulators can be used with natural
Type 310A-32A Pressure Reducing Regulator
Bulletin 71.2 D102066X012 Type 310A February 2017 Type 310A-32A Pressure Reducing Regulator Figure 1. Type 310A Regulator with Type 32A Pilot Introduction The Type 310A pilot-operated high-pressure regulator
metering valves Metering Valves Index 1300 Series Series Series 8
Metering Valves Index 1300 Series 1 0 Series 300 Series HOKE Inc. PO Box Spartanburg, SC 9305- Phone () 57-79 Fax () 57-50 www.hoke.com Sales-hoke@circor.com metering valves Milli-Mite 1300 Series Forged
NDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
Form No. P Meter, PD Model SD, ASD, SF, or ASF-4, 4R, 4V, or 4RV-NF Parts List
Form No. P0541.03 Meter, PD Model SD, ASD, SF, or ASF-4, 4R, 4V, or 4RV-NF Parts List Issue/Rev. 0.3 (3/01) Bulletin P0541.03 SD and ASD Models The Most Trusted Name In Measurement SD or ASD SF or ASF
599 Series Zone Valve Bodies:
599 Series Zone Bodies: Two-Way and Three-Way VE VV-1 Description Features The 599 Series two-way and three-way Zone s with a 1/10-inch (2.5 mm) stroke. Direct-coupled, universal bonnet Application Ordering
STC Solenoid Valve List Price
STC Solenoid Valve List Price To Order, Please Specify: 1. Model No. 2. Voltage 3. Electrical Entry Options Voltage & Electrical Connection Options B. Electrical Connection 2V025-1/8 1/8 2/2/2/1 2V025-1/4
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high pressure systems. These regulators can be used with natural
500 Series Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG Features Popoff or Inline Valves Adjustable Crack Pressure
Flowrite 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body
Flowrite 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body Document No. 155-185P25 VF 599-4 Description The Flowrite VF 599 Series ANSI Class 250 three-way valves are designed to work with either a
Type HSR Pressure Reducing Regulator for Residential, Commercial, or Industrial Applications
March 2013 Type HSR Pressure Reducing Regulator for Residential, Commercial, or Industrial Applications High Capacity Compact Design High Capacity Internal Relief TYPE HSR ANGLE BODY Globe Bodies Angle
Worcester Controls Directional Ball Valves
Worcester Controls Directional Ball Valves Series D44/D4, Series D51, Series 18/19 Experience In Motion Page 2 Series D44/D4, ½ " 2" Bottom Entry Page 6 Series D51, 2" 8" Bottom Entry Page 9 Series 18/19,
CT Series Flex Tube. Displacer Type Level Controller. Specifications
Displacer Type Level Controller CT Series Flex Tube Bulletin SSIL001 The CT (Control, Throttling) Series Flex Tube has been an industry standard for over five decades in fluid level control. Its simplicity,
EVP SERIES PROPORTIONAL CONTROL VALVES
EVP SERIES PROPORTIONAL CONTROL VALVES 207 Clippard is pleased to add the EVP series proportional control valve to our electronic product line. This product combines the features of the existing EV series
Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250
Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250 Document No. 155-184P25 VF 599-3 Description The Flowrite 599 Series two-way valves are designed to work with either a pneumatic
Aluminum Dimensions: 7.32" W 9.49"H Net Wt.: 7.9 lbs. (3.6 kg) Shipping Wt.: 9.9 lbs. Stainless Steel
DP Series Specifications DP-10 Port Dimensions (6 GPM Max.) Intake & discharge connection: Polypropylene (PPG) 3/8" Female NPT Aluminum (ADC-12) 3/8" Female NPT Stainless Steel (316) 3/8" Female NPT DP-15
Type HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications
Bulletin 71.1 D103087X012 Type HSR December 2017 Type HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications High Capacity Compact Design P1524_1 High Capacity Internal
Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250
Flowrite 599 Series Two-Way Valves, 1/2 to 2- inch Bronze Body, ANSI 250 Technical Instructions Document No. 155-184P25 VF 599-3 Description The Flowrite 599 Series two-way valves are designed to work
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
needle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
V A L V E S & M E A S U R E M E N T. TOM WHEATLEY Piston Check Valves TOM WHEATLEY
TM TOM WHEATLEY Piston Check Valves TABLE OF CONTENTS PISTON CHECK VALVE Features 1 Installation & Operation 2 How to Order 2 Assembly & Disassembly 3 Dimensions Raised Face Flanged End 4 Dimensions Ring
Flowrite 599 Series. Technical Bulletin. 1/2 to 2-Inch Valve (2-Way & 3-Way) and Actuator Assembly Selection. Document No.
rite 599 Series 1/2 to 2-Inch (2-Way & 3-Way) and Actuator Assembly Selection Bulletin TB 255 How to Use the Selection Graphs How To Use The Tables This Bulletin will aid in selecting a 1/2-inch to 2-inch
AVAILABLE MODELS AND SIZES SPECIFICATIONS
SPRINGS (Key 18) END CAP (Key 14) HOUSING (Key 1) INDICATOR CAP (Key 30) DRIVE SHAFT (Key 13) O-RING (Key 20) The Dyna-Flo D-Force actuator is a rugged dual piston scotch yoke actuator designed specifically
ITT Conoflow Process Control Solutions
ITT Conoflow Process Control Solutions Process Control Solutions About ITT Conoflow Under the ITT Conoflow brand, ITT is a market-leading manufacturer of Instruments and Controls for the various segments
Toggle Valve s. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns
www.swagelok.com Toggle Valve s OG,, and 92 Series Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials Features Compact, rugged design Opens
E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions
E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions Polypropylene SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
Installation Operation and Maintenance Instructions Model Contents
Contents 1.0 General 1.1 Model Number........................... 2 1.2 Specifications............................ 2 1.3 Dimensions.............................. 3 Repair Kit Materials & Part Numbers........
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Red Valve. The World Leader In Pinch Valve Technology MANUAL PINCH VALVES
Red Valve The World Leader In Pinch Valve Technology MANUAL PINCH VALVES Manual Red Valve Pinch Valves Same Face-to-Face As Gate, Plug, Or Ball Valves To 12" 100% Full Port Bi-Directional Droptight Shutoff
Flowrite VF 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body
PRODUCT NO. MODEL LANDIS & STAEFA ASSEMBLED IN U.S.A. Flowrite VF 599 Series Three-Way Valves 1/2 to 2-inch Bronze Body Document No. 155-185P25 VF 599-4 Cv VF186R1 Description The Flowrite VF 599 Series
FLOW CONTROLLERS Instrument/Analyzer Products. Catalog 4513/USA April 2003
FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 table of contents SC420 Series............. 1-2 SC423XL
Model G6-S3. Repeatability ±0.02%
Issue/Rev. 0.6 (2/07) Smith Meter TM PD Rotary Vane Meter 6" Steel Model G6 Specifications Bulletin SS01014 The Smith Meter TM Model G6 Meter is a 6", double-case, straight-through (S3 through S8) or angle-type
Flowrite 599 Series Two-Way Valves 1/2 to 2-inch Bronze Body
Flowrite 599 Series Two-Way Valves 1/2 to 2-inch Bronze Body Document No. 155-184P25 VF 599-3 Description The Flowrite 599 Series two-way valves are designed to work with either a pneumatic or electronic
627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated reducing regulators (Figure 1) are for low and high systems. These regulators can be used with natural gas, air, or a
type 630r relief Valve
December 2011 type 630r relief Valve W1934 Figure 1. Type 630R Relief Valve Introduction The Type 630R is a general relief valve that is available in NPS 1 and 2 / DN 25 and 50 body sizes. It is frequently
Air Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT
Air Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT SERIES Features Full Port Lead Free Brass Diverter Valve Spring return or double acting actuators Ball Valve direct mounted
HIGH PRESSURE SPRAYERS
S S STRAIGHT THROUGH QDS FITTINGS AND SWIVELS NOZZLES SPRAY GUNS AND WANDS 337 NOZZLES QUICK DISCONNECT NOZZLE 0-degree red tip nozzle, 15-degree yellow tip nozzle, 25-degree green tip nozzle, 40-degree
Smith Meter Rotary Vane PD Meters Single and Double Case PD Meters Installation / Operation / Maintenance Manual
MANUAL Smith Meter Rotary Vane PD Meters Single and Double Case PD Meters Installation / Operation / Maintenance Manual Bulletin MN01011 Issue/Rev 1.0 (6/17) Models Singles-Case Meters SC-13, 13DI SD-30,
Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
1/8 NPT (F) 1/8 NPT (F)
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Features l Compact size (.5 OAL) l 4 Porting configurations l High flow l Single stem design l Plumbing
SECTION Pressure & Temperature Control
16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air
Adjustable Port Valves for HOT or COLD AIR, GAS, OIL, WATER, STEAM
ADJUSTABLE PORT VALVES Bulletin 1008A December 2009 Adjustable Port Valves for HOT or COLD AIR, GAS, OIL, WATER, STEAM 3" Adjustable Port Gas Valve Beck Electric Operator 6" Adjustable Port Air Valve Honeywell
Additive Injectors. AccuPlus. Maintenance. The Most Trusted Name In Measurement
Additive Injectors AccuPlus Issue/Rev. 0.0 (11/12) Maintenance Bulletin MN05003E The Most Trusted Name In Measurement Caution The default or operating values used in this manual should not be construed
Versa-Matic. Operating Manual. 3/8" Bolted Plastic Pumps. Polypropylene Kynar
Versa-Matic Operating Manual 3/8" Bolted Plastic Pumps Polypropylene Kynar E8 SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser
Non Ferrous Aircraft Fueling Meters
Issue/Rev. 0.3 (6/02) Smith Meter TM PD Rotary Vane Meter Non Ferrous ircraft Fueling Meters Specifications Bulletin SS01009 The Smith Meter TM ircraft Refueling Meters are non ferrous, single case, rotary
Pneumatic Power Valves Series 75/76 Manual, Mechanical, Pneumatic and Electric Valves
Quic-Pics Catalogue Pneumatic Power Valves Series 75/76 Manual, Mechanical, Pneumatic and Electric Valves Contents: Product Line Overviews 2 Manually Operated Valves 5 Pushbuttons 6 Toggle Switch 8 Knob
OPERATION MANUAL. ALUMINUM Models DUCTILE Models 316 S.S. Models AIR-OPERATED DOUBLE DIAPHRAGM PUMPS
OPERATION MANUAL 3 METALLIC PUMP (CLAMPED) PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF80 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models DUCTILE Models 316 S.S. Models A JDA Global Company CAUTIONS - READ
Mallard. Model 3200 Liquid Level Controller. Features
Mallard Model 3200 Liquid Level Controller The Model 3200 (Figure 1) Liquid Level Controller is ideal for oilfield scrubber and separator applications where level control is required. Its rugged and versatile
NE January 2016 THREE-WAY VALVES SERIES 1600 MODEL 1601 SERIES 1900 MODEL Previously manufactured by Dezurik and Honeywell
516.01-3NE January 2016 THREE-WAY VALVES SERIES 1600 MODEL 1601 SERIES 1900 MODEL 1901 Previously manufactured by Dezurik and Honeywell Description: Models 1601 and 1901 three-way valves combine with pneumatic,
Flowrite AP 599 Series
AP 599-2 Flowrite AP 599 Series 12-inch Pneumatic Valve Actuator Description The Flowrite AP 599 Series 12-inch pneumatic valve actuator is designed for use with the Flowrite VF 599 Series valves. This
Material Specifications
5.2012.12.b 6200 Series Specifications The Flomore 6200 Series Pump line consists of a series of basic pump options all developed from a modular power unit. All units are pneumatically driven positive
Check Valves BALL TYPE
2 Ball type check valves are produced in three sizes:, 1/8" NPT and 1/4" NPT. They are available in both brass and stainless steel and are suitable for use with liquids or gases. Free flow occurs in one
Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
470 Series Piston Actuators
January 000 Bulletin 61.:470 470 Series Piston Actuators The 470 Series pneumatic piston actuators (figure 1) are used in either throttling or on-off applications with control valves having 90.5 mm (3-9/16
US SERIES. Universal Sewer Valves. Universal Sewer Valves. Valve Function. Features Include
Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Allows accumulating air to escape while line is in operation Features Include Standard and short body series available
5020 Series Injector
5.2018.9.k 1 5020 Series Injector 1 2 3 4 5 6 10 11 7 12 13 8 2 14 Parts List 15 16 17 Item # Part # # Reqd. Description Material Alternate Part # 1 A-1854 1 0-12 PSI Pressure Gauge A-1295SS 2 A-0022 1
KINGSTON. Model 710. Side Outlet Safety Relief Valve. Manufacturing reliable industrial valves for industry since 1908.
KEst.1908 KINGSTON Manufacturing reliable industrial valves for industry since 1908. Model 710 Side Outlet Safety Relief Valve Storm Manufacturing Group, Inc. 23201 Normandie Ave., Torrance, CA 90501-5050
SECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
D-Series Rack & Pinion Pneumatic Actuators
D-Series Rack & Pinion Pneumatic Actuators Introduction 2 Bettis D-Series pneumatic rack and pinion actuators provide its users with reliability and economy in valve automation. Specifically designed for
High Pressure Ball Valves
High Pressure Ball Valves 79 Valve Options Reliable, simple, operation for on-off service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum
Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT
Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT SERIES Features Spring Return or Double Acting Actuators Lead Free Brass Ball Valve with ISO5211 direct mounting Full port design
167D Series Switching Valves
June 2011 167D Series Switching Valves P1185 P1184 167D TWO-WAY SWITCHING VALVE 167DA THREE-WAY SWITCHING VALVE Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are
T205VB Series Tank Blanketing Vacuum Breakers
February 2014 T205VB Series Tank Blanketing Vacuum Breakers Figure 1. Typical T205VB Series Vacuum Breaker Introduction The T205VB Series vacuum breakers (Figure 1) are used for precise control of small
Powermite 599 Series MT Series Terminal Unit Two-way Valves
Powermite 599 Series MT Series Terminal Unit Two-way Valves Document No. 155-196P25 VF 599-5 April 9, 29 Description The Powermite 599 Series ANSI Class 25 MT Series two-way valve bodies work with any
Mid-West Instrument. Diaphragm Type Differential Pressure Gauge & Switch Model 130. Shown here with Range 0-5 H2O
Diaphragm Type Differential Pressure Gauge & Switch BULLETIN NO. 130/11 (SUPERSEDES BULLETIN NO. 130/02) is a rugged general purpose differential pressure gauge with a 4-1/2" round dial. Common Applications: