Hydraulic Valves Needle Valves
|
|
- Merilyn Robertson
- 5 years ago
- Views:
Transcription
1 Table of Contents 1 Hydraulic Valves Needle Valves TMN Series FFG 2000 Series FFA 2000 Series Check Valves C Series 8-9 Flow Controls TMF Series Low Pressure Ball Valve S95 NPT Series Ball Valves 2 Way Ball Valve 3 Way Ball Valve Mini Ball Valve Locking Kits
2 2 TMN SERIES NEEDLE VALVES Designed for extremely precise control of air and hydraulic fluids Features Easy-to-read colour bands and micrometer knob provide exact flow settings Re-set repeatability within 1% Precision machined double-step stem with fine pitch thread provides accurate control, even at extremely low flows Rugged, all-metal construction no plastic parts Brazed construction to withstand high pressure Set screw provided to secure valve setting Steel valves are zinc-plated and sealed with black chromate for double corrosion protection Specifications Maximum Operating Pressure Temperature Range Stem Taper Stem Pitch CV Factor 5,000 psig (345 bar) -20 ºF to 400 ºF (-29 ºC to 204 ºC) 2 º x 45 º double step 40 threads/inch (15.7 threads/cm) See Ordering Information Materials Body Stem Knob Colour Bands Set Screw Stem Packing Performance TMN Series Pressure Drop Stem full open 12L 14 Steel Stainless Steel Brass Anodized Aluminum Steel Viton "O" ring with Teflon Backup PRESSURE DROP (PSIG) /4 1/2" 3/4" 1" FLOW (GPM)
3 Hydraulic Valves 3 Dimensions Size (P) Port Female (D) Body Square (L) Length (E) Screw Max. 1/4" 1/4 NPT mm mm mm 3/8 NPT mm mm 1/2" 1/2 NPT mm mm mm 3/4" 3/4 NPT mm mm mm 1 1 NPT mm mm mm Ordering Information Size Part Number Orifice Diameter CV 1/4" TMN250S mm 0.47 TMN375S /2" TMN500S mm /4" TMN750S mm TMN1000S mm 2.45
4 4 FFG 2000 SERIES NEEDLE VALVES Ideal for applications which require fine metering and positive shut-off. Designed for use with air, oil, water, steam, liquid fuels and most chemicals. Features Heavy duty construction for strength and safety up to 10,000 psi (690 bar) Precision-machined stems and valve bodies provide perfect seat alignment for leak-free shut-off Carbon steel valves are zinc plated and sealed with black chromate for double corrosion protection Available in panel or in-line mounted configuration 303 and 316 stainless steel valves available on special order Specifications Maximum Operating Pressure Min. Burst Pressure Temperature Range Stem Taper Sizes 1/8 to 1/2" Stem Taper Sizes 3/4 to 1" Stem Pitch Sizes 1/8 to 1/2 Stem Pitch Sizes 3/4 to 1" CV Factor 10,000 psig hyd. (690 bar)/2,000 psig air (138 bar) 20,000 psig (1380 bar) -40ºF to 500ºF (-40ºC to 296ºC) 10.5º 15º 16 threads/inch 14 threads/inch See Ordering Information Materials Body Stem Bonnet Nut Handle Stem Packing Panel Mounting Kit Valve Size:1/8 to 1/4 3/8 to 1/2 3/4 to 1 Performance 12L 14 Carbon Steel 303 Stainless Carbon Steel Aluminum Teflon Kit #: KIT2002S KIT2004S KIT2005S PRESSURE DROP (PSIG) /8" 1/4" 1/2" 3/4" 1" FLOW (GPM) FFG Series Pressure Drop - Stem full open
5 Hydraulic Valves 5 Dimensions Size (P) Port Female (B) Max. (D) (E) (F) Square (G) (H) 1/8" 1/8 NPT mm mm mm mm mm 1/4" 1/4 NPT mm mm mm mm mm 3/8 NPT mm mm mm mm mm 1/2" 1/2 NPT mm mm mm mm mm 3/4" 3/4 NPT mm mm mm mm mm mm 1 1 NPT mm mm mm mm mm mm Ordering Information Size Part Number Orifice Diameter CV 1/8" FFG2001T /4" FFG2002T 0.66 FFG2003T /2" FFG2004T /4" FFG2006TA mm FFG2008TA mm 5.22
6 6 FFA 2000 SERIES NEEDLE VALVES Ideal for applications which require fine metering and positive shut-off. Designed for use with air, oil, water, steam, liquid fuels and most chemicals. Features Heavy duty construction for strength and safety up to 10,000 psi (690 bar) Precision-machined stems and valve bodies provide perfect seat alignment for leak-free shut-off Carbon steel valves are zinc plated and sealed with black chromate for double corrosion protection Available in panel or in-line mounted configuration 303 and 316 stainless steel valves available on special order Specifications Maximum Operating Pressure Min. Burst Pressure Temperature Range Stem Taper Sizes 1/8 to 1/2" Stem Taper Sizes 3/4 to 1" Stem Pitch Sizes 1/8 to 1/2 Stem Pitch Sizes 3/4 to 1" CV Factor 10,000 psig hyd. (690 bar)/2,000 psig air (138 bar) 20,000 psig (1380 bar) -40ºF to 500ºF (-40ºC to 296ºC) 10.5º 15º 16 threads/inch 14 threads/inch See Ordering Information Materials Body Stem Bonnet Nut Handle Stem Packing Panel Mounting Kit Valve Size:1/8 to 1/4 3/8 to 1/2 3/4 Performance 12L 14 Carbon Steel 303 Stainless Carbon Steel (zinc plated) Aluminum Teflon Kit #: KIT2002S KIT2004S KIT2005S PRESSURE DROP (PSIG) /8" 1/4" 1/2" FLOW (GPM) 3/4" FFA Series Pressure Drop - Stem full open
7 Hydraulic Valves 7 Dimensions Size (P) Port Female (B) Max. (D) (E) 1/8 1/4 3/8 1/2 3/4 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT mm 88.90mm 92.08mm 92.08mm mm mm 45.24mm 54.77mm 54.77mm 69.06mm mm (F) Square (G) (H) Diameter (I) mm 25.40mm 31.75mm 31.75mm 44.45mm mm 9.52mm 9.52mm 9.52mm 22.23mm mm 15.88mm 19.05mm 19.05mm 38.10mm mm 26.99mm 40.48mm 40.48mm 49.21mm Ordering Information Size Part Number Orifice Diameter CV 1/8 1/4 3/8 1/2 3/4 FFA2001T FFA2002T FFA2003T FFA2004T FFA2006TA mm
8 8 C S E R IE S C H E C K V A L V E S Specifications Ordering Informa tion Size Material Crack ing Pressure Threads
9 Hydr aulic V alves 9 Dimensions Code A thread B C Rated Flow Weight
10
11
12 12 Low Pressure Ball Valve S95 NPT Series Ball valves - Full Port 1/4"- 4" Hot Forged Brass Features 1 - S95 Unplated NPT body 2 - Seat Chrome plated ball 4 - S92 unplated NPT end cap 5 - Nickel plated stem O-ring design 6 - Nut 7 - Green O-ring 8 - Yellow steel handle Options (up to 2" size) Stem extension T-handle for valves up to 1" Round handle Patented locking device AISI 430 stainless steel handle AISI 316 stainless steel ball and/or stem Filled glass PTFE seals Custom design Note: Approvals apply to specific configurations only Specifications: Hot forged, unplated brass body to DIN and UNI specifications Approved in sizes up to 4" by American gas association (AGA), Canadian gas association (CGA) Approved in sizes up to 2" by Underwriters Laboratories (UL), Canadian Underwriters Laboratories (CUL), Factory Mutual (FM), IAPMO (UPC) and meeting WW-V-35C Federal U.S. Specifications up to 4". Full port for maximum flow Seals tested to guarantee zero leakage Teflon self-lubricating seats with flexiblelip design Double seal system permits flow in both directions Chrome plated brass ball for longer life No metal-to-metal moving parts Blowout-proof nickel plated brass stem Two Viton O-rings at the stem for maximum safety No Maintenance required Handle stops on body to avoid stresses at valve stem Removable carbon steel handle with PVC coating Handle clearly indicates flow direction NPT taper ANSI B female port threads Silicone-free lubricant on all seals Max. non-shock cold working pressure: 600 psi for valves up to 2", 450 psi for valves over 2" Temperature range: -40ºF to +350ºF
13 Hydraulic Valves Dimensions 1/4 ¼NPT D DN I L G A H 1/2 3/8NPT ½NPT Valve Size 3/4 1-½" 1" 1-¼" 2" ¾NPT 1NPT 1-¼NPT 1-½NPT 2NPT ½" 3" 2-½NPT 3NPT 4" 4NPT IN MM IN MM IN MM IN MM IN MM IN MM Ordering Information Product Type S95 Ball Valve Low Pressure Valve Size 1" Threads B41 1/4" F41 C41 G41 1 1/4" M41 3" D41 1/2" H41 1 1/2" N41 E41 3/4" I41 2" L41 2 1/2" 4" NPT SAE (special order) 13
14 14 2 Way Ball Valves Specifications Body Steel Ball Steel Temperature Range -14ºF - 212ºF Ball Seals Delrin Shaft Seals Buna N Dimensions Model Size A B C D E F G H L M SW LW 1/4" 1.38" 2.80" 1.65" 1.57" 0.67" 2.87" 1.73" Full Bore 1/2" 3/4" 1.69" 2.17" 0.71" 0.91" 3.27" 3.74" 1.89" 2.44" 1" 2.56" 1.42" 4.45" 2.60" Reduced Bore 1-1/4" 1-1/2" 1-1/4" 2.56" 2.56" 3.31" 1.42" 1.42" 1.65" 4.76" 4.76" 4.53" 2.60" 2.60" 3.74" Full Bore 1-1/2" 3.86" 1.89" 5.16" 4.25" 2" 4.06" 2.03" 5.51" 4.53" Ordering Information 0.43" 0.43" 0.43" 0.53" 0.53" 0.53" 1.93" 2.13" 2.24" 2.87" 3.27" 3.27" 3.27" 3.98" 4.53" 4.72" 1.18" 1.38" 1.46" 1.77" 2.17" 2.17" 2.17" 3.31" 4.01" 4.25" 4.33" 4.33" 4.33" 0.63" 0.63" 0.67" 0.87" 0.94" 1.06" 1.10" 1/4" 1/2" 3/4" 1" 1-1/4" 1-1/2" 1-1/4" 1-1/2" 2" 0.35" 0.35" 0.35" 0.24" 0.39" 0.79" 1.26" 1.58" 1.97" Model Part # Ports Part # Ports Working Pressure Weight Locking Kit Part # Full Bore Reduced Bore Full Bore GE2 N 1/4" GE2 N GE2 N 1/2" GE2 N 3/4" GE2 N 1" GE2 N 1-1/4" R GE2 N 1-1/2" R GB2 N 1-1/4" GB2 N 1-1/2" GB2 N 2" 1/4" NPT NPT 1/2" NPT 3/4" NPT 1" NPT 1-1/4" NPT 1-1/2" NPT 1-1/4" NPT 1-1/2" NPT 2" NPT GE2 SAE4 GE2 SAE6 GE2 SAE8 GE2 SAE12 GE2 SAE16 GE2 SAE20 GE2 SAE24 GB2 SAE20 GB2 SAE24 GB2 SAE32 SAE-4 SAE-6 SAE-8 SAE-12 SAE-16 SAE-20 SAE-24 SAE-20 SAE-24 SAE PSI 7250 PSI 7250 PSI 5800 PSI 1.00 lb 1.25 lb 1.61 lb 3.00 lb 4.80 lb 5.25 lb 5.25 lb 8.25 lb lb lb GE-LK-6 GE-LK-6 GE-LK-6 GE-LK-20 GE-LK-20 GE-LK-20 GE-LK-20 GB-LK GB-LK GB-LK Many other options available. Please consult MP Filtri (Canada) Inc.
15 3 Way Ball Valves 15 Specifications Body Steel Ball Steel Temperature Range -14ºF - 212ºF Ball Seals Delrin Shaft Seals Buna N L-Ported diverter valve Dimensions Pressure Center port only Model Size A B C D E F G H I L M SW LW Full Bore Reduced Bore Full Bore 1/4" 1/2" 3/4" 1" 1-1/4" 1-1/4" 1-1/2" 2" 1.38" 1.57" 1.69" 2.17" 2.56" 2.56" 3.31" 3.86" 4.05" 0.67" 0.71" 0.91" 1.42" 1.42" 1.65" 1.89" 2.03" 2.80" 2.87" 3.27" 3.74" 4.45" 4.76" 4.53" 5.16" 5.51" 1.65" 1.73" 1.89" 2.44" 2.60" 2.60" 3.74" 4.25" 4.53" 0.43" 0.43" 0.43" 0.53" 0.53" 0.53" 1.93" 2.13" 2.24" 2.87" 3.27" 3.27" 3.98" 4.53" 4.72" 1.18" 1.38" 1.46" 1.77" 2.17" 2.17" 3.31" 4.02" 4.25" 4.33" 4.33" 4.33" 1.32" 1.46" 1.57" 2.04" 2.32" 2.42" 2.83" 3.19" 3.35" 0.63" 0.63" 0.67" 0.87" 0.94" 1.06" 1.10" 1/4" 1/2" 3/4" 1" 1-1/4" 1-1/4" 1-1/2" 2" 0.35" 0.35" 0.35" 0.24" 0.39" 0.79" 1.26" 1.58" 1.89" Ordering Information Model Part # Ports Part # Ports Working Pressure Weight Locking Kit Part # Full Bore Reduced Bore Full Bore GE3 N 1/4" GE3 N GE3 N 1/2" GE3 N 3/4" GE3 N 1" GE3 N 1-1/4" R GB3 N 1-1/4" GB3 N 1-1/2" GB3 N 2" 1/4" NPT NPT 1/2" NPT 3/4" NPT 1" NPT 1-1/4" NPT 1-1/4" NPT 1-1/2" NPT 2" NPT GE3 SAE4 GE3 SAE6 GE3 SAE8 GE3 SAE12 GE3 SAE16 GE3 SAE20 N/A N/A N/A SAE-4 SAE-6 SAE-8 SAE-12 SAE-16 SAE-20 N/A N/A N/A 5800 PSI 5800 PSI 1.00 lb 1.25 lb 1.61 lb 3.00 lb 4.80 lb 5.25 lb 8.25 lb lb lb GE-LK-6 GE-LK-6 GE-LK-6 GE-LK-20 GE-LK-20 GE-LK-20 GB-LK GB-LK GB-LK
16 16 Mini Ball Valves Specifications Body Ball Temperature Range Steel Nickel Plated Steel Between -14ºF + 212ºF Ball Seals Shaft Seals Delrin Buna N Dimensions Part # A B C D E F G H L M SW LW GEM 1/4" NPT 1111AB 0.49" 2.48" 1.85" 0.27" 1.26" 2.24" 0.67" 1/4"NPT 0.24" 0.24" GEM 1/4" SAE 1111AB 0.49" 2.48" 1.85" 0.27" 1.26" 2.24" 0.67" SAE " Ordering Information Part # Ports Working Pressure Weight GEM 1/4" NPT 1111AB 1/4" NPT 7250 PSI 0.50 lb GEM 1/4" SAE 1111AB SAE PSI 0.50 lb Locking Kits Specifications New design allows for increased security. Kits are field installable. Constructed of zinc plated carbon steel Ordering Info. If ordering factory installed add -LK to the end of the ball valve # i.e.: GE2-N-1/4"-LK 0.24" Value Size Kit # 1/4"-1/2" GE-LK-6 3/4"-1 1/2" reduced bore GE-LK /2"-2" full bore GB-LK
TABLE OF CONTENTS. Ball Valves
bal lval ves TABLE OF CONTENTS Ball Valves High Pressure, 2 Way 3 High Pressure,3 Way 4 High Pressure, Handles 5 Locking Kit 5 Low Pressure, Brass & Stainless Steel 6 Mini 5 HIGH PRESSURE BALL VALVES -
More informationFlow Limit Safety Shutoff Valves Model 1
Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally
More informationAir Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT
Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT SERIES Features Spring Return or Double Acting Actuators Lead Free Brass Ball Valve with ISO5211 direct mounting Full port design
More informationAir Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT
Air Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT SERIES Features Full Port Lead Free Brass Diverter Valve Spring return or double acting actuators Ball Valve direct mounted
More informationBRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.
195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated
More informationBRASS & BRONZE VALVES
BRASS & BRONZE VALVES V200 series Cast Brass are economical general service valves. Ball valves feature chrome plated balls with teflon seats, adjustable packing glands and blowout-proof stems. V205 gate
More informationSTC Manual & Actuated Process Valves
STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2
More informationBOSHART INDUSTRIES BRASS GATE VALVE WITH DRAIN
BOSHART INDUSTRIES 2-2 SERIES 0813 BRASS GATE VALVE WITH DRAIN 0 PSI W.O.G. (Cold water, oil, gas) Black cast hand wheel Non-rising stem - solid wedge disc Threaded & CxC 0813-05 0813-07 0813-0.508 0.760
More information3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT SERIES Features Standard Port 3-way L or T flow path Four seat design allows for full pressure at any port Hand lever operator Actuator
More informationKerotest N-Series Needle Valves CRN Approved
K1514 K5534 Product Brief The N-Series is designed for processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs, and other minimally corrosive applications. Features/Benefits
More informationVES VAL NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW
...170-214 LEAD FREE...171-174 LEAD FREE BALL...171-173 BRASS...175-197 LF Gate and Check valves... 174 Full Port Ball... 175 Locking Handle... 176 Butterfly Handle... 177 MIP x FIP... 188-189 N/P Ball
More informationValves. Model Code Breakdown. Valves. Steel High Pressure Steel Ball Valves. Steel High Pressure Steel Ball Valves
Steel Ball Steel Ball Model Code Breakdown AB2 N1-1/2 _ 1 1 D B Valve Series Connection Type/Size N NPTF Pipe Thread S SAE Straight Thread Adapter & Stem Seals B Buna - Standard V Viton Bore Restriction
More informationneedle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationneedle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More information3-Way Lead Free Brass Ball Valves Full Port, L or T Flow Path, 400 PSI CWP 1/4 to 2 NPT
3-Way Lead Free Brass Ball Valves Full Port, L or T Flow Path, 400 PSI CWP 1/4 to 2 NPT SERIES Features FULL PORT 3-way L or T flow path Functions as a diverter, selector or mixing valve Four ball seat
More informationPneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: Fax:
COMPANY Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: 973-761-4150 Fax: 973-761-5731 Quick Valves Disconnect Table of Contents Index Table of Contents Ball
More informationScrewed Bonnet Needle Valves. Needle Valves
89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available
More informationQUICK SELECTION GUIDE
SELECTION GUIDE SAE HYDRAULIC 4-BOLT AND SPLIT FLANGED FITTINGS IN CARBON STEEL AND STAINLESS STEEL ISO 14001 Registered Environmental Management ISO 9001 Registered Quality Management OHSAS 18001 Registered
More informationHIGH PRESSURE TRUNNION BALL VALVES TBV SERIES
HIGH PREURE TRUNNION BALL VALVE TBV ERIE TBV FEATURE On/Off-service ball valve with 2-way pattern Diverter, selector and on/off-service ball valve with 3-way pattern MAWP* 10,000 psi (689 bar) with PEEK
More informationmetering valves Metering Valves Index 1300 Series Series Series 8
Metering Valves Index 1300 Series 1 0 Series 300 Series HOKE Inc. PO Box Spartanburg, SC 9305- Phone () 57-79 Fax () 57-50 www.hoke.com Sales-hoke@circor.com metering valves Milli-Mite 1300 Series Forged
More informationHY-SPEC CATALOGUE - HYDRAULIC VALVES. Hydraulic Valves. Visit our website Catalogue
HY-SPEC CATALOGUE - HYDRAULIC VALVES Hydraulic Valves Catalogue Visit our website HY-SPEC PRODUCT FAMILY HY-SPEC CATALOGUE - AC/DC POWER PACKS HY-SPEC CATALOGUE - GAS ENGINE PRODUCTS Accessories AC/DC
More information3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
More informationSize: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
More informationCustomer Service : Tel Toll-free Fax
Table Of Contents Terms and Engineering Data...2 Lead-Free Brass Ball Valves...3-4 TFP600-LF Full port, 2-piece body, lead-free, Threaded Ends...3 SFP600-LF Full port, 2-piece body, lead-free, Solder Ends...4
More informationInline Adapters are Electro Polished to 10 Ra Max. 2 Valves supplied with Metal to Metal Face Seal connections have
CRYOGENIC RELIEF VALVE (STAINLESS) 1/4" and 1/2" NPT -4 and -8 Metal To Metal Face Seal 1/4" and 1/2" Bi-Lok Dual Ferrule Tube 10-750 Psig (0.69-51.7 Bar) STAINLESSCRV Description The Generant Series Stainless
More informationConfigurations: s.64. s.31. s.74 3 way. Flow: Mini 2 way Direct mount. Flow: Full. Flow: Standard 3 way. ISO 5211 F03 Flange
RUBINETTERIE UTENSILERIE BONOMI MEETING STANDARDS IS OUR STANDARD Configurations: 1 2 3 s.31 s.64 s.74 3 way Flow: Mini 2 way Direct mount Flow: Full 2 way ISO 5211 F03 Flange Flow: Standard 3 way ISO
More informationINDUSTRIAL VALVES BRASS BALL VALVES PLUS WIDE SOLUTIONS ACCORDINGLY TO EVERY KIND OF APPLICATION OPTIMIZED DIMENSIONS & PERFORMANCES THREAD UP TO 4
591 INDUSTRIAL VALVES BRASS BALL VALVES PLUS WIDE SOLUTIONS ACCORDINGLY TO EVERY KIND OF APPLICATION OPTIMIZED DIMENSIONS & PERFORMANCES THREAD UP TO 4 INDUSTRIAL VALVES / BRASS BALL VALVES 592 BRASS EUROPE
More informationtubing, faucets and fittings
small Bore teflon ptfe tubing Order by the Foot* Superior Chemical Resistance High degree of flexibility allows multiple twists and turns in tight spaces Non-stick surface will not collect particulates
More informationCNC DISTRIBUTION. ITEM NO Description Quantity
Valves CNC DISTRIBUTION Brass Ball Valves ITEM NO IPS Ball Valve *600# PSI WOG 150 PSI WSP * Heavy Pattern Forged Brass Construction *Full Port For Maximum Flow *Teflon Seats * Teflon Stem Packing * AGA,
More informationHexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
More informationKUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
More informationSCREWED BONNET NEEDLE VALVES
SCREWED BONNET NEEDLE VALVES H-99 SERIES FEATURES n Blowout-Proof Stem n MAWP* up to 1, psi (69 bar) n MAWT* up to 648 C (12 F) n End connection size range: to 1" or to 25mm n Flow Coefficient (Cv) to1.5
More informationPROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
More informationModel descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
More informationHIGH PRESSURE SPRAYERS
S S STRAIGHT THROUGH QDS FITTINGS AND SWIVELS NOZZLES SPRAY GUNS AND WANDS 337 NOZZLES QUICK DISCONNECT NOZZLE 0-degree red tip nozzle, 15-degree yellow tip nozzle, 25-degree green tip nozzle, 40-degree
More informationMicro Valve. Quick, Sure Response with Design Adaptability. Features and Benefits. Applications. Dependable Performance SPECIFICATIONS / PARTS LIST
SPECIFICATIONS / PARTS LIST Micro Valve Bulletin SSIN064 Issue/Rev. 0.0 (2/18) Since its introduction in 1956, Micro Valve has provided successful service through thousands of applications. This makes
More informationINSTRUMENTATION METERING VALVES. VMT Series.
INSTRUMENTATION METERING VALVES VMT Series www.unilok.com Features Pressure rating up to VMTS series - 2000psig (137bar) VMTL & VMTM series - 1000psig (69bar) Temperature rating from -23 C(-10 F) to 204
More informationElectronic Ball Valve Guide Specifications
Electronic Ball Valve Guide Specifications Control Valve Assemblies Ball Valve Bodies All ball valves used for modulating or floating (tri-state) control must be furnished with a stainless steel ball &
More informationQUICK COUPLINGS DHI. ver. 0001
QUICK COUPLINGS DHI www.manuli-hydraulics.com Q.SAFE DHI INTRODUCTION MQS-DHI DIRECT HOSE INTEGRATION An innovative system to enable direct assembly of the quick-release coupling to the flexible hose,
More informationSECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
More informationHVAC. Products. TRI A FLO Automatic Cartridges PAGE 2. TRI Y FLO Strainer PAGE 3. TRI U FLO Accessory Union PAGE 4. CB Series Butterfly/Venturi PAGE 5
HVAC TRI A FLO Automatic Cartridges TRI Y FLO Strainer TRI U FLO Accessory Union Products Automatic balancing valves.5 thru 108.0 in Brass, Stainless, PVC, CPVC, Titanium, Ceramic, Monel, and more PAGE
More informationVN Series Needle Valves
VN Series Needle Valves VN5, VN6, and VNS6 Series Regulating and Shut-Off Applications Catalog No. VN-2 January 2015 VN5 Series Integral-Bonnet Needle Valves VN6 Series Bar-Stock Needle Valves VNS6 & VNS10
More informationConfigurations: s.64. s.31. s.74 3 way RUBINETTERIE UTENSILERIE BONOMI. Flow: Mini 2 way Direct mount. Flow: Full 2 way
RUBINETTERIE UTENSILERIE BONOMI Configurations: 1 2 3 s.31 s.64 s.74 3 way Flow: Mini 2 way Direct mount Flow: Full 2 way ISO 5211 F03 Flange Flow: Standard 3 way ISO 5211 F03 Flange Mini up to 3/4 Full
More informationHose Length Custom Length Supply Line Options Ball Valve w/ PT UBY Strainer w/ PT and BDV
Model AC Circuit Sentry Automatic Balance Hose Kits - Submittal Hose Kit Size Flow Range *MFR Qty. 1/2".33-14 5 3/4".33-14 11 3/4" 5-50 11 1".33-14 20 1" 5-50 20 1-1/4" 5-50 30 **1-1/2" 5-50 44 **1-1/2"
More informationLubrication Fittings. 1/4"-28 Taper Thread Fittings
1/4"-28 Taper Thread Fittings Used on most cars and trucks and many industrial machines. It is recommended that SAE-LT taper threads be assembled into 1/4"-28 UNF, Class 3B, straight threaded holes having
More information500 Series Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG Features Popoff or Inline Valves Adjustable Crack Pressure
More informationCompact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe
Compact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe SERIES Features Industrial quality miniature actuator Industrial grade True Union ball valve Visual valve position indicator
More informationCompact Electric Actuated 3-Way Ball Valves T-Port, 316 Stainless Steel, Full Port 1/4 to 3/4 NPT
Compact Electric Actuated 3-Way Ball Valves T-Port, 316 Stainless Steel, Full Port 1/4 to 3/4 NPT Features Industrial quality miniature actuator Full Port direct mount 3-way stainless steel ball valve
More informationCatalog Hydraulic Couplings High Pressure
High Pressure 3 Series Threaded Actuation Design Threaded Sleeve The 3 Series coupling are designed for high pressure applications. The coupler sleeve and nipple body must be manually threaded together
More informationPFM6 Digital Portable Hydraulic Tester
PFM6 Digital Portable Hydraulic Tester temperature Helical tube pressure gauge One toggle switch to control power and pressure Platinum resistance temperature sensor Pressure surge protection with internal
More information2200 North Main Street Washington, PA PH: FX:
2200 North Main Street 2200 North Main Street KVAB SERIES MEDICAL VALVES All valves MRI compatible - approved to 3 Tesla. Nominal stroke is 1.5 turns. Full flow at ⅓ turn. Strong, durable body is made
More informationFILTERS, STRAINERS AND VALVES PRODUCT GUIDE
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE TEE FILTERS INLINE FILTERS BRASS FILTERS SPIN ON FILTERS OFF-LINE FILTRATION Y STRAINERS BASKET STRAINERS DUPLEX STRAINERS STRAINING ELEMENTS FRP STRAINERS DUAL
More informationCharacterized Port -CP Three-Way Ball Valves
Characterized Port Three Way Ball Valves Technical Instructions The Characterized Port (-CP) Series 3-way Ball Valves are coupled with our Type A actuators to provide three-way mixing or diverting flow
More information502 brass ball valve with ADA pneumatic actuator
502 brass ball valve with ADA pneumatic actuator MAIN CHARACTERISTICS The 502 valve is a brass ball valve dedicated to the automatic shut off of lines of standard fluids like water or air. With chromed
More informationSAMPLE CYLINDERS. Sample Cylinders & Accessories. Spun End Cylinders. Ultra-Seal Constant Pressure Cylinders. VP Series Cylinder Valves
SAMPLE CYLINDERS T H E S O L U T I O N F O R G A S S A M P L E S T O R A G E Sample Cylinders & Accessories ISO 9001:2008 Certified Quality System Spun End Cylinders Ultra-Seal Constant Pressure Cylinders
More informationHigh Pressure Ball Valves
High Pressure Ball Valves 79 Valve Options Reliable, simple, operation for on-off service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum
More informationAbout Gaugetech Warranty Trademarks Disclaimer
Product Catalog About Gaugetech Gaugetech is a leading manufacturer/distributor of pressure gauges, temperature instruments and related products serving the petrochemical, pulp and paper, hydraulic industries,
More informationSERIES. CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) Description
CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) CR Description The Generant Series CR Cryogenic Regulator provides high flow during Cryogenic Vessel Pressure Build function
More informationJHawk Instrument Inc. warrants the
Warranty Statement JHawk Instrument Inc. warrants the component parts and workmanship of its products under normal use and service for a period of one year from the date of the shipment. All obligations
More informationMALE X FEMALE LARGE-PORT BALL VALVE T-900 M x F and T-900 M x F-T
MLE X FEMLE LRGE-PORT LL VLVE T-900 M x F and T-900 M x F-T urable forged brass construction Space-saving male-by-female end connections are ideal for confined piping installations T-handle equipped models
More informationFLOW CONTROLLERS Instrument/Analyzer Products. Catalog 4513/USA April 2003
FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 table of contents SC420 Series............. 1-2 SC423XL
More information1/8 NPT (F) 1/8 NPT (F)
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Features l Compact size (.5 OAL) l 4 Porting configurations l High flow l Single stem design l Plumbing
More informationAnderson Greenwood M1/M110 Differential Pressure Manifolds
A 3-valve differential pressure manifold with integral metal seats or replaceable, roddable soft seats for applications requiring remote mounting from the instrument Features General application The M1
More informationManifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationElectric Actuated 3-Way Ball Valves L-Port, PVC Body, Teflon/EPDM Seals 1/2 to 2 inch Pipe
Electric Actuated 3-Way Ball Valves L-Port, PVC Body, Teflon/EPDM Seals 1/2 to 2 inch Pipe SERIES Features Industrial grade PVC ball valve with PTFE/EPDM seals IP67 weatherproof polyamide enclosure with
More informationBall Valves. Red Steel Long Handle. Green Steel Long Handle. Blue Steel Long Handle. Section 7 Valves. Female x Female, BSPP. Female x Female, BSPP
Ball Full Bore Long Thread Flat Handle Seal Material PTFE -15 C to +120 C 25 bar Red Long Handle Blue Long Handle Green Long Handle 837 Female x Female, BSPP 0109 2023-0439 1/4 7.70 2023-0447 3/8 7.70
More informationVFDAVV 1/2 VFDAVV VACUUM VALVES. DIMENSIONS (mm)
VACUUM VALVES VFDAVV VACUUM VALVES Direct acting vacuum valves 12VDC, 24VDC, 110VAC & 230VAC 1/4 & 1/2 Ports Full size high flow orifice 3-way Operation 2-way Operation (plug exhaust port using VFBP-U02)
More informationManual & Automated Ball Valves
Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 9000 Series DM9000
More informationPORTER FLOWMETERS & FLOW CONTROLLERS. Technology you can trust
PORTER FLOWMETERS & FLOW CONTROLLERS Technology you can trust PORTER PRECISION FLOWMETERS AND FLOW CONTROLLERS you can trust Porter Instrument Company, Inc. is a leading manufacturer of specialized components
More informationBALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationBRUTE II 4-VALVE Manifold
gauges Leak Detectors Detectors 20 BRUTE II 4-VALVE Manifold The Brute II 4-Valve Test Charging Manifold provides the flow that s proven faster than any conventional manifold. The aluminum alloy is forged
More informationPhone: Fax: Toll Free: PUMP ACCESSORIES
PUMP ACCESSORIES BALL CHECK VALVES Plainsman Ball Check Valves Reliable, field proven check valves. Metal to metal seats Simple design makes it easy to install and maintain, with only two moving parts
More informationBUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
More informationHigh Pressure Solenoid Valves
High Pressure Solenoid Valves Available for Quick Delivery Controls the flow of Gases & Liquids up to 15,000 PSIG Natural Gas, Hydrogen & other High Pressure Gases High Pressure Cryogenics Flammable Liquids
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More informationD I S T R I B U T E D V A L V E S. Super G Lubricated-Non-Lubricated Plug Valve TEXSTEAM
Super G Lubricated-Non-Lubricated Plug Valve SUPER G EXCLUSIVE FEATURES Built and tested in accordance with API 6A, API 6D & B16. Lubricated and non-lubricated in same valve. Use it either way Metal-to
More informationS, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
More informationBehringer Ball Valve Ordering Code
Ball Valve Catalog Behringer Ball Valve Ordering Code 1 Behringer 2-Way Ball Valves Block Body Valves with Threaded Connections Size Range: 1/4-1 Steel Material Delrin Ball Seats (Others available on request)
More informationControl Valves & Valve Accessories
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Stainless Steel 0- Fully Ported valve with M5 threads available- contact factory Viton is a registered trademark
More informationIntegral-Bonnet Needle Valves
Integral-Bonnet Needle Valves 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600 F (315 C) Integral-Bonnet Needle Valves
More information3 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO
Flow Control Valves NPTF NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO Swivel Design: Meter-Out, Meter-In
More informationINSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES
INSTRUMENTATION ULTRA HIGH PURITY FITTINGS & VALVES www.unilok.com Since 1984 INSTRUMENTATION Application VB1 series General Ball Valve MWP : 1000psig/69bar with PTFE seats, 2000psig/137bar with TFM seats
More informationVALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
More informationTY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
More informationAccutubes. Accuracy True double averaging design +1% of rate accuracy +0.1% repeatability Tested and certified by independent flow labs
s Meriam s Flow Sensors are lab-tested and field-proven flow elements perfect for gas, liquid or steam service. With thousands in use worldwide, the continues to be the right choice when ease of installation,
More informationIntroduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
More informationManual & Automated Ball Valves
Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 4600 Series 8700 Series
More informationSTC Solenoid Valve List Price
STC Solenoid Valve List Price To Order, Please Specify: 1. Model No. 2. Voltage 3. Electrical Entry Options Voltage & Electrical Connection Options B. Electrical Connection 2V025-1/8 1/8 2/2/2/1 2V025-1/4
More informationPressure Regulators K Series
www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators, K Series 2 Swagelok K Series Pressure Regulator
More informationHIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES. VB6F Series.
HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.unilok.com Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54 (-65 ) to 177
More informationMT SERIES PNEUMATIC ROTARY ACTUATORS
MT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
More informationP1000 Series Pressure Independent Valves
Code No. LIT-1900445 Issued January 29, 2014 P1000 Series Pressure Independent Valves Description P1000 Series Pressure Independent Valves are designed to regulate the flow of hot or chilled water and
More informationRHINO VALVES WORLDWIDE
RHINO VALVES WORLDWIDE Series 44 ISO Design of three pieces with plate disposition ISO 5211 for their automation. The drilled superior portion of the body (ISO5211) allows an easy installation of automation
More informationInstrumentation Ball Valves
Rev. 0-2016 Ball Valve Main Components: 1. Obturator or closure member: part of the valve positioned in the flow stream to allow or prevent the flow (ball or tip); 2. Stem: part which connects the obturator
More informationBA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends
BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends 3-Piece, Full-Port, Bronze Ball Valve Extended-Tube Ends Ideal for use in medical gas systems, pharmaceutical
More information736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR VALVE FEATURES The 736 XS-746 XS is a 3 pieces full bore ball valve for industrial fluids, especially made to be easily actuated and to offer a good and long
More informationRESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
More informationSUBSEA VALVES
SUBSEA VALVES Fitok Subsea Valves are manufactured with some notable differences to standard models to help ensure effective fluid transfer for the Oil and Gas Industry. Valves within the range include
More informationSPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
More information