BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
|
|
- Kristin Dawson
- 5 years ago
- Views:
Transcription
1 C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic G F L DIMENSIONS: (mm) DN L C PD PD D E F Kg PE D E G Kg , , , , , , , , , , , , , , , , , , , , The pneumatic actuator is calculated for 6 bar air supply, safety factor of 30% and max. differential pressure of 16 bar. For standard working conditions. PE OPTIONS: Positioner, limit switches, proximity switches, speed controller, /09/2017
2 BUTTERFLY VALVE 27 SERIES General features GENERAL FEATURES: Type: Lug Face-to-face: API609, BS EN 558, DIN3202, ISO 5752 Flange: DIN, BS, UNI, ISO, ANSI, AS, JIS Mounting flange: ISO5211 Working pressure: PN 16 (DN0 ~ DN150), PN10 (DN200 ~ DN300), 150 PSI Lugs threaded according to ISO (DIN PN 16) or according to ASME B16.5 (ANSI and DIN PN 20) Application: HVAC, water supply & sewage, food & beverage, Chemical and petrochemical processing Power and utilities Paper and pulp, ship building DESIGN STANDARDS Standards ISO 5752, API 609 Compliance DIN 3202, API 609, BS EN 558 Actuator mounting flange ISO 5211 Marking ISO 5209 TESTS AND CERTIFICATES PED/CE 97/23/EC ATEX 2 GD Pressure test API /01/2017
3 BUTTERFLY VALVE 27 SERIES General features Retaining system The shaft is retained in the body with a retaining ring, a thrust washer and two C-rings, providing a blow-out proof shaft assembly. The retaining ring may be easily removed with a standard hand tool on field assembly. Mounting flange ISO 5211 mounting flange accommodates direct mounting of all types of actuators, including handles, gear operators, electric and pneumatic actuators Shaft One-piece through shaft ensures dependability and positive disc positioning. O-ring Shaft seal provides further assurance against shaft leakage. Bushings Shaft bushings reduce torque and isolate the shaft from the valve body, preventing seizure of the shaft due to corrosion in the shaft journal. Seat / Body The tongue-and-groove seat to body retention method make field replacement simple and fast. The resilient seat features lower torque and eliminates the need for flange gaskets. Disc and shaft connection The spline or square connection eliminates shaft retention components being exposed to the line media, maximum flow is achieved. Hub seal Smooth finished disc flats mate with seat flats to give a highly efficient primary seal that prevents leakage into the shaft area. Disc Precision profile provides bubble-tight shut-off, assures minimum torque and longer seat life. 2 26/01/2017
4 BUTTERFLY VALVE 27 SERIES Materials MATERIALS: N Description Material 1 Body Ductile iron (GGG-50) 2 Seat NBR, EPDM, Viton 3 Shaft Stainless steel 10 (DN0 ~ DN150) Stainless steel 31 (DN200 ~ DN300) Disc CF8M 5 Bushing PTFE 6 O-ring NBR, EPDM, Viton 7 Lever Aluminium 3 26/01/2017
5 C B A H BUTTERFLY VALVE 27 SERIES Dimensions F ØD1 DN n-m x Ød P E DIMENSIONS: (mm) DN Ø A B C F H P E d ANSI 150 DIN PN 10 DIN PN 16 ØD1 n-m ØD1 n-m ØD1 n-m Kg 0 1 1/2" ,5-5/8" 110 -M M16,1 50 2" ,5-5/8" 125 -M M16, /2" ,5-5/8" 15 -M M16,5 80 3" ,5-5/8" M M16 5,1 100 " ,5 8-5/8" M M16 9, 125 5" ,0 8-3/" M M16 11, " ,5 8-3/" 20 8-M M20 1, " ,5 8-3/" M M20 19, " ,0 12-7/8" M M2 27, " ,0 12-7/8" M M2 1,0 26/01/2017
6 BUTTERFLY VALVE 27 SERIES How to order TYPE BODY STEM DISC SEAT ACTUATOR = fix V H TYPE 17 Wafer - PN 10/16 - ANSI 150 Lug - PN 10/16 (DN0 - DN150) 27 Lug - PN10 (DN200 - DN300) ANSI - on request BODY 2 Ductile iron GGG-50 Rilsan coated STEM 3 Stainless steel AISI 10 (DN0 - DN150) Stainless steel AISI 31 (DN200 - DN300) DISC Stainless steel CF8M SEAT E B V EPDM (T: -20 C C) Buna N (T: -10 C - 80 C) Viton (T: -10 C C) Kv VALUES, BREAK AWAY TORQUE: ACTUATORS DN Kv (m³/h) T (Nm) 10 bar T (Nm) 16 bar Free stem 5 H R Handle Gearbox 26/01/2017
7 FIG. PD - PE New design (El-O-Matic type F) Single acting type PE (+ PD up to 100) Available from size12 up to 600 Double acting type PD Available in size 150 up to 600 Old design (El-O-Matic type E) Single acting type PE Available from size 950 up to 000 Soon to be replaced with new design Double acting type PD Available from size 950 up to 000 Soon to be replaced with new design 1 18/0/2016
8 GENERAL FEATURES: - Rack and pinion actuator - Travel stop adjustment: 0 ~90-5 /+10 and +80 ~ +95 (size 25 ~ size 600) 0 ~90-3 /+10 and +80 ~ +93 (size 950 ~ size 000) PNEUMATIC ACTUATOR FIG. PD - PE (Type F) Working temperature: Standard: -20 C ~ 80 C Low temperature version: -0 C ~ 80 C High temperature version: -20 C ~ 120 C) - Working pressure: 3 ~ 8 bar - Coupling according to ISO 5211 and DIN Mounting of solenoid valves according to Namur Std. - Mounting of limit switches according to Namur - Min cycles FIGURE: PD: double acting PE: spring return, normally closed PEO: spring return, normally open DESIGN STANDARDS Mounting of solenoid valves NAMUR Std. Mounting of devices NAMUR VDI, NAMUR VDE 385 Std. Coupling according ISO 5211, DIN 3337 TESTS AND CERTIFICATES Safety ATEX II 2 GD, SIL3 Quality Assurance CE/PED, ISO /11/2016
9 Materials - FIG. PD - PE (Type F) MATERIALS: Item Description Material 1 Body Cast aluminium alloy, chromated and polyurethane powder coated 2 End cap Cast aluminium alloy, chromated and polyurethane powder coated 3 Piston Cast aluminium alloy Pinion High grade aluminium, hard anodized 5 Spring cartridge Spring steel, electrophoretic coated 6* Bearing strip piston rack POM 7* Bearing piston PTFE 25% carbon filled 8* Bearing pinion POM 9* Thrust washer POM, black UV stabilized 10 End cap screw Stainless steel 11* Circlip Spring steel, Deltatone coated 12* O-ring seal pinion Nitrile rubber 13* O-ring seal piston Nitrile rubber 1* O-ring seal end cap Nitrile rubber 15* O-ring seal limit stop Nitrile rubber 16* B-port seal Silicon rubber 17 Limit stop screw Stainless steel 18 Limit stop nut Stainless steel 19 Limit stop washer PA66 20 Warning sticker Polyester 21 Indicator assembly ABS + stainless steel screw 22 Center plate (optional) Nylon PA6, black 23 Insert drive Aluminium Alloy *included in repair kit Low temperature components: - Castrol Optitemp TT1 grease - Silicone (MVQ70 rubber) O-ring seals High temperature components: - Castrol high temperature grease - Viton (FPM) O-ring seals - PTFE 25% carbon filled piston rings - Nylon 66 + aramid fibre & PTFE bearing strip piston rack and pinion bearing 2 23/11/2016
10 Dimensions - FIG. PD - PE (Type F) TYPE 12: M5x8 G1/" E F G D 15 Y I E2 J W1 X L L1 K1 K C 5 H O M N ±0.5 0 øp +0.5 øv W T W 2 R U U1 A B DIMENSIONS: (mm) TYPE A B C D E F G H I J K K1 L L1 M , ,7 6, 25, 50,8 16,5 TYPE N O Max. O Min. P T U V W W1 W2 X Y Kg (PD) Kg (PE) ,1 9,05 12, M6x8 Mx7 Mx7 G 1/8" M6x12 0,6 0,7 3 23/11/2016
11 Dimensions - FIG. PD - PE (Type F) TYPE : A2 (DA) 2x 1/ BSP C2 C1 C3 Note 3 A3 A 32 C5 C 2 X M6x8 A9 A8 B3 x M5x8 M6x12 Note 3 30 B1 A7 A1 (SR) A5 B2 DA has the same shape as SR for type 0025 up to type 0100 A6 DIMENSIONS: (mm) TYPE A1 A2 A3 A A5 A6 A7 A8 A9 B1 B2 B3 C1 C2 C3 C C5 Kg (PD) Kg (PE) , 1, ,1 2, ,8 3, ,5, ,9 6, ,0 8, ,2 1, ,0 28, ,0 39, ,0 66, ,0 88, ,0 131,0 23/11/2016
12 Dimensions - FIG. PD - PE (Type F) TYPE : & 2500 ød5 ød x D2 D D6 x D6 D9 øe6 øe5 x M16x D5 D5 ød1 ød3 E8 2 D (D8) D3 (D7) E7 ±0.5 E3 E D6 262 øe E1 x D2 x D6 DIMENSIONS: (mm) TYPE ISO1 D5 D2 ISO2 D1 D6 D3 D D7 D8 D9 D F05 50 M6x10 F03 36 M5x F05 50 M6x10 F07 70 M8x F05 50 M6x10 F07 70 M8x F07 70 M8x13 F05 50 M6x F07 70 M8x13 F M10x F M10x15 F07 70 M8x F M10x15 F07 70 M8x F M12x18 F M10x F1 125 M12x18 F M10x F M20x F M20x F25 25 M16x TYPE E1 Max. E1 Min. E2 E3 E E5 E6 E7 E ,00 11,0 1,0 15, ,0 x: ± 0,1 mm xx: ± 0,25 mm 000 1,00 1,0 18,0 15, , ,00 1,0 18,0 15, , ,00 17,0 25,0 18, , ,00 17,0 26,0 28, , ,00 22,0 28,0 28, , ,00 22,0 36,0 28, , ,00 27,0 36,0 28, , ,16 36,0 58,2 x x x x xx ,16 6,0 60,2 x x x x xx ,16 6,0 60,2 x x x x xx ,2 55,0 72,2 x x x x xx /11/2016
13 Torque - FIG. PD (Type F) TYPE PD Output Torque For Double Acting in Nm 2 bar 3 bar 3,5 bar bar,5 bar 5 bar 5,5 bar 6 bar 6,5 bar 7 bar 8 bar 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 12,8 7,3 8,5 9,7 10,9 12,2 13, 1,6 15,9 17,1 19, /11/2016
14 Torque - FIG. PE (Type F) TYPE PE Spring set Output Torque For Spring Return in Nm Spring stroke 3 bar 3,5 bar bar,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º END START /11/2016
15 Torque - FIG. PE (Type F) TYPE PE Spring set Output Torque For Spring Return in Nm Spring 3 bar 3,5 bar bar,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º END START /11/2016
16 1 1 PE PE PNEUMATIC ACTUATOR Springset combinations (Type F) A N = 10 N = 20 N = B N = 0 N = 50 N = A: Piston top view B: Position of piston rack 9 23/11/2016
17 Operating speed - FIG. PD - PE (Type F) Cycle time in seconds TYPE Spring return Double acting A-port pressurized Spring stroke A-port pressurized B-port pressurized 12 0, 0, 0, 0, 25 0,5 0, 0,5 0, 0 0,6 0,5 0,6 0,5 65 0,7 0,5 0,6 0, ,8 0,6 0,8 0, ,0 0,8 0,9 0, ,3 0,9 0,0 1, ,9 1,3 1, 1, ,2 1,9 2,2 2,2 950,6 3,2 3,9 3, ,9,8 5,9, ,0 6,3 7,8 7, , 10,8 13,3 13,0 TEST CONDITIONS: 1. Solenoid valve capacity: 0.6m³/h 2. Pipe diameter: 6 mm 3. Medium: Clean air. Supply pressure: 5.5 bar 5. Load: Average load 6. Stroke: Temperature: Room temperature 10 23/11/2016
18 Compressed air - FIG. PD - PE (Type F) Actuator volumes TYPE Max. volume (liters) Central chamber End cap chamber Volume displaced 12 0,05 0,06 0,0 25 0,11 0,19 0,08 0 0,16 0,36 0, ,36 0,55 0, ,0 0,80 0, ,80 0,70 0, ,80 1,00 0, ,90 1,70 1, ,10 2,90 2, ,10,30 3, ,80 7,00 5, ,0 11,10 8, ,0 18,90 1,00 Consumption per stroke (liters) TYPE Outward stroke Inward stroke 2 bar bar 8 bar 2 bar bar 8 bar 12 0,1 0,2 0,0 0,16 0,28 0, ,29 0,50 0,90 0,6 0,85 1,60 0 0,7 0,80 1,50 0,87 1,60 3, ,90 1,60 3,10 1,30 2,0, ,00 1,70 3,20 2,00 3,60 6, ,10 3,60 6,80 1,90 3,0 6, ,0,00 7,30 2,70,60 8, ,10 9,00 17,00 5,00 8,00 15, ,00 1,00 27,00 8,00 1,00 25, ,00 23,00,00 12,00 20,00 37, ,00 36,00 68,00 19,00 33,00 62, ,00 50,00 92,00 30,00 53,00 97, ,00 87,00 161,00 52,00 89,00 165,00 Volume central chamber Single and double acting Volume end cap chamber Double acting A 11 B 23/11/2016
19 FIG. PD - PE (Type E) GENERAL FEATURES: - Rack and pinion actuator - Travel stop adjustment: 0 ~90 +1 /-10 (0~ ) - Working temperature: -20 C ~ 80 C - Working pressure: 3 ~ 8 bar - Coupling according to ISO 5211 and DIN Mounting of solenoid valves according to Namur Std. - Mounting of limit switches according to Namur - Type 12 up to type 600: new design FIGURE: PD: double acting PE: spring return, normally closed PEO: spring return, normally open DESIGN STANDARDS Mounting of solenoid valves NAMUR Std. Mounting of devices NAMUR VDI, NAMUR VDE 385 Std. Coupling according ISO 5211, DIN 3337 TESTS AND CERTIFICATES Safety ATEX II 2 GD, SIL3 Quality Assurance CE/PED, ISO /10/2016
20 Materials - FIG. PD (Type E) MATERIALS: Item Description Material 1 Body Cast aluminium 2 Pistons Cast aluminium 3 Drive shaft High grade aluminium End Cap Cast aluminium 10 Guide band - body Nylatron 11 Guide band - piston PTFE, Carbon filled 12 Bearing bush Nylatron 20 Bearing bush Delrin 21 O-ring - drive shaft top Nitrile Rubber 23 Washer - ED limit stops Nylon 25 O-ring - end cap Nitrile Rubber 26 O-ring - piston Nitrile Rubber 27 Thrust washer - drive shaft top ZEDEX 100 K 28 O-ring - drive shaft bottom Nitrile Rubber 30 O-ring - ED limit stops Nitrile Rubber 35 Spring clip Carbon Spring Steel 36 End cap bolt ED/ES Stainless Steel 0 Limit stop bolt ED Stainless Steel 1 Nut limit stop bolt Stainless Steel 2 Nut cover Polyethylene 3 O-ring - B-port / Steel ball Nitrile Rubber Insert Aluminium Alloy 2 05/10/2016
21 Materials - FIG. PE (Type E) MATERIALS: Item Description Material 1 Body Cast aluminium 2 Pistons Cast aluminium 3 Drive shaft High grade aluminium 5 End Cap Cast aluminium 6 Spring - inner Carbon Spring Steel 7 Spring - mid Carbon Spring Steel 8 Spring - outer Carbon Spring Steel 9 Spring holder Steel 10 Guide band - body Nylatron 11 Guide band - piston PTFE, Carbon filled 12 Bearing bush Nylatron 20 Bearing bush Delrin 21 O-ring - drive shaft top Nitrile Rubber 22 Washer - ES limit stops Nylon 25 O-ring - end cap Nitrile Rubber 26 O-ring - piston Nitrile Rubber 27 Thrust washer - drive shaft top ZEDEX 100 K 28 O-ring - drive shaft bottom Nitrile Rubber 29 O-ring - ES end cap Nitrile Rubber 3 Washer - ES Steel 35 Spring clip Carbon Spring Steel 36 End cap bolt ED/ES Stainless Steel 37 Limit stop bolt ES Stainless Steel 38 Nut limit stop bolt Stainless Steel 2 Nut cover Polyethylene 3 O-ring - B-port / Steel ball 6 Nitrile Rubber / Steel Insert Aluminium Alloy 3 05/10/2016
22 Dimensions - FIG. PD - PE (Type E) TYPE 12: M5x8 G1/" E F G D 15 Y I E2 J W1 X L L1 K1 K C 5 H O M N ±0.5 0 øp +0.5 øv W T W 2 R U U1 A B DIMENSIONS: (mm) TYPE A B C D H I O T ISO 5211 ØV W kg F0 2 M6x8 05/10/2016
23 Dimensions - FIG. PD - PE (Type E) TYPE : T M5x8 øv1 øv P W W1 M5x8 B A G1/" I 2 D C A B H DIMENSIONS: (mm) TYPE A B C D H I P T ISO 5211 ØV / ØV1 W / W1 kg F03 36 M5x8 F05 50 M6x10 F05 50 M6x10 F07 70 M8x13 F05 50 M6x10 F07 70 M8x13 F05 50 M6x10 F07 70 M8x13 F07 70 M8x13 F M10x16 F07 70 M8x13 F M10x16 F07 70 M8x13 F M10x16 F M10x16 F M12x F M10x16 F1 10 M16x F M20x30 05/10/2016
24 Dimensions - FIG. PD - PE (Type E) TYPE 2500: T M5x8 O 23.6 øv M16x25 M5x8 B W A G1/" 2 D I C A B H DIMENSIONS: (mm) TYPE A B C D H I O T ISO 5211 ØV W kg F M20x /10/2016
25 Dimensions - FIG. PD - PE (Type E) TYPE 000: M5x8 T M5x8 O W B 30 øv 32 A G1/" 2 I D C A B H DIMENSIONS: (mm) TYPE A B C D H I O T ISO 5211 ØV W kg F25 25 M16x /10/2016
26 Torque - FIG. PD (Type E) TYPE PD Output Torque For Double Acting in Nm 2 bar 3 bar 3,5 bar bar,5 bar 5 bar 5,5 bar 6 bar 6,5 bar 7 bar 8 bar 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º , , , , , , , , , , , , ,6 Kg 8 05/10/2016
27 Torque - FIG. PE (Type E) Output Torque For Spring Return in Nm Spring TYPE PE Spring set 3 bar 3,5 bar bar,5 bar 5 bar 5,5 bar 6 bar 7 bar stroke Kg 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º END START , , , , , , , /10/2016
28 Torque - FIG. PE (Type E) Output Torque For Spring Return in Nm Spring TYPE PE Spring set 3 bar 3,5 bar bar,5 bar 5 bar 5,5 bar 6 bar 7 bar stroke Kg 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º 0º 90º END START , , , , , , /10/2016
29 Springset combinations (Type E) PE PE1600 Spring set 1 Inner spring Spring set 2 Mid spring Spring set 3 Inner & mid spring PE PE000 Spring set Inner & outer spring Spring set 5 Mid & outer spring Spring set 6 Inner, mid & outer spring springs 6 springs 8 springs 10 springs 12 springs 1 springs Spring 11 05/10/2016
30 Operating conditions - FIG. PD - PE (Type E) Air volume (l) TYPE Opening Closing Operating time (s) 12 0,1 0,1 0, 25 0,1 0,1 0,5 0 0,2 0,2 0,7 65 0,3 0, 1, , 0,5 1, ,73 0,65 1, ,8 1 2, ,8 1,9 3, ,9 3,1,5 950,7,9 5, ,3 8 6, ,3 7, ,5 17,5 12,0 Operating time is average with actuator under load and solenoid valve fitted Air consumption is the actual free air volume at 1 atm 12 05/10/2016
BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - N123 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
More informationBUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - 223 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
More informationPNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design (El-O-Matic type F) Single acting type PE (+ PD up to 100) Available from size12 up to 600 Double acting type PD Available in size 150 up to 600 Old design (El-O-Matic type E) Single
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 1370 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) Ø L C PD PE PD D E F Kg PE D E
More informationBALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
More informationPNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design (El-O-Matic type F) Single acting type PE (+ PD up to 100) Available from size12 up to 600 Double acting type PD Available in size 150 up to 600 Old design (El-O-Matic type E) Single
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
More informationPNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design Single acting type PE Available from size12 up to 350 Double acting type PD Available from size12 up to 350 Old design Single acting type PE Available from size 600 up to 000 Soon
More informationBUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic
B C D FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic G F L The pneumatic actuator is calculated for 6
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PE PD C D E F Kg
More informationBALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 730 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) Ø L A B PD PE PD C D E F Kg
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More information516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationBUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg
B C D BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B AD AS AD C D F Kg AS C
More informationBUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
More informationEL-O-Matic F-Series Rack and Pinion Pneumatic Actuators
Product Data Sheet October 2016 EF.00.00.EN Rev. 7 EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators High quality and economical actuator Improve plant and operator safety Reliable and flexible in
More informationEL-O-Matic F-Series Rack and Pinion Pneumatic Actuators
EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators Product Data Sheet EF.00.00.EN Rev. 8 January 2018 High quality and economical actuator Improve plant and operator safety Reliable and flexible in
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
More informationBettis RPE-Series Rack and Pinion Pneumatic Actuators
Bettis RPE-Series Rack and Pinion Pneumatic Actuators Product Data Sheet September 2017 BE.00.00 Rev. 3 High quality and economical actuator Improve plant and operator safety Riable and flexible in process
More informationBettis RPE-Series Rack and Pinion Pneumatic Actuators
Rack and Pinion Pneumatic Actuators BE.00.00 Rev. 7 March 2019 High quality and economical actuator Improve plant and operator safety Reliable and flexible in process control Increase serviceability BEG.01.00.EN,
More informationBALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
More informationConcentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
More informationKeystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area
The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
More informationRESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
More informationTechnical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationPRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3
BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationWAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
More informationTechnical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0
More informationRESILIENT SEATED BUTTERFLY VALVES
DESIGN FEATURES APPLICATIONS: HVAC Chemical/Petrochemical Processing Food and Beverage Industry Power and Utilities Pulp and Paper Industry Stem Configuration: Gives positive attachment for handles or
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
More informationBFV : 14 : 10 : 12 BUTTERFLY VALVE
BFV : 14 : 10 : 12 BUTTERFLY VALVE Looks Like Conventional Butterfly Valve... 2 FEATURES HIGHER Cv Larger disc for larger flow Improved profile of disc provides minimum Resistance to flow BOTTOM STEM Stem
More informationC Series Pneumatic Rack & Pinion Rotary Actuators
Allied Flow Controls, Inc. C Series Pneumatic Rack & Pinion Rotary Actuators Spring Return & Double Acting Features and Benefits Torque Range at 0 Psig Air Pressure: Double Acting: -,00 lbf-in Spring Return:
More informationL15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST
L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
More informationTHROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
More informationPneumatic Actuators New AD and AS (Sizes 0025 to 0350)
Pneumatic Actuators New AD and AS (Sizes 0025 to 0350) APOLLO RACK & PINION Designed and manufactured for the ultimate in durability and reliability, the new Apollo Pneumatic Rack & Pinion Actuators provide
More informationWAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationWafer, Semi Lug, Lug and Flanged Type
Year : Wafer, Semi Lug, Lug and Flanged Type Page 1 Year : Specification Description : GVC concentric rubber lined butterfly valves suitable for bi-directional flow and bubble tight shut-off at full rated
More information501M series - Triple Eccentric Metal Seated Butterfly Valves p / 301E series - Butterfly Valves with rubber seat p. 6
PRODUCT GUIDE 501M series - Triple Eccentric Metal Seated Butterfly Valves p. 4 p. 5 401N series - Double Eccentric Butterfly Valves 301 / 301E series - Butterfly Valves with rubber seat p. 6 p. 6-7 301TSS
More informationPNEUMATIC QUARTER TURN RACK & PINION ACTUATOR MODEL - HP
FEATURES AND BENEFITS Aluminium body, hard anodized, internally polished to 45-50µ and Nickel plated to protect against wear and corrosion Open/Closed indicator is standard on all models Travel adjustment
More informationButterfly valve with ADA pneumatic actuator
1133-1135 Butterfly valve with ADA pneumatic actuator MAIN CARACTERISTICS The 1133-1135 lug butterfly valves are dedicated to the automatic shut off of standard fluids lines. The construction includes
More informationThe company 1 Certifications 2
PNEUMATIC ACTUATORS PRISMA MECÁNICA S.L The company 1 Certifications 2 ALUMINIUM PNEUMATIC ACTUATORS Technical features 3 PA range 5 P range 7 Disassembly and materials 9 PA dimensions 11 P dimensions
More informationBR 10a Control and Shut-off Butterfly valve
M-PTFE lined double-eccentric BR 10a Control and Shut-off Butterfly valve Application: Tight-closing, double-eccentric butterfl y control valve with M-PTFE lining for process engineering and plants with
More informationButterfly valves. SIL safety. SALES SERVICE +358 (0) DOUBLE ECCENTRIC
SALES SERVICE +358 (0)17 262 3555 info@econosto.fi Butterfly valves OUBLE ECCENTRIC butterfly valves are specifically designed for high demanding applications where the valve performance is critical. Available
More informationButterfly Valves T5 (Wafer) and T6 (Lugged) Series
Butterfly Valves T5 (Wafer) and T6 (Lugged) Series 50-600mm size range Cartridge type replaceable seat Full Vacuum to 16 bar pressure range (up to 300mm sizes) Universal flanging compatibility on wafer
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
More informationMTC Series. Double Acting and Spring Return Actuator and Accessories. MasterTorq. Pneumatic Actuators. Atex Class 2
Double Acting and Spring Return Actuator and Accessories MTC Series TM Pneumatic Actuators Atex Class Operations Double Acting A B A B By supplying air to Port A, pressure is applied to the center chamber
More informationGeneral information. Marking ISO 5209:... General purpose industrial valves. Marking (Equivalent to EN 19)
FIVC Butterfly valves are designed by European standards. Enclosed a list of references that fulfil complete or partially depending of each case. Valve dimensions UNE-EN 593:... Industrial valves. Metallic
More informationBUTTERFLY VALVE WITH ADA PNEUMATIC ACTUATOR
1121-1125 BUTTERFLY VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CARACTERISTICS The 1121 to 1125 wafer butterfly valves are dedicated to the automatic shut-off of medium pressure industrial fluids lines up to
More informationHEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and
More informationptfe seated 30 years of high quality experience
ptfe seated BUTTERFLY VALVES ed TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 tables components DN 350-500 dimensions 5 torque values 6 Installation
More informationQuarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
More informationSize: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
More informationBIDIRECTIONAL WAFER Knife Gate Valve
09/03/2016 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with
More informationKeystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
More informationKEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
More informationButterfly valve with ADA pneumatic actuator
A B Butterfly valve with ADA pneumatic actuator MAIN CARACTERISTICS The 1133-1135 lug butterfly valves are dedicated to the automatic shut off of standard fluids lines. The construction includes a long
More informationBUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
More information736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR VALVE FEATURES The 736 XS-746 XS is a 3 pieces full bore ball valve for industrial fluids, especially made to be easily actuated and to offer a good and long
More informationBUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
More informationBUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
More informationKEYSTONE F89 PNEUMATIC QUARTER-TURN ACTUATOR GENERAL PURPOSE / HAZARDOUS AREA
FEATURES Direct mounting to all Keystone butterfly valves and ball valves. Valve connection compatible with Keystone (imperial and metric) and ISO 5211. Double Rack and Pinion design nullifies side loads
More informationButterfly Valves. Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: Tel: Fax:
Butterfly Valves Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: 519-759-3911 Tel: 800-563-6302 Fax: 519-759-7970 www.craneenergy.com A Crane Co. Company Butterfly Valves Ordering Information
More informationType / Material code Body* Disc Stem Lining**
Design butterfly valve is designed with lug or flange connection. Lug connection in dimensions DN 32-300, flange connecton DN 300-1000. is available in pressure ratings PN 10 /16 according to dimension.
More informationradius Series A pneumatic rack & pinion actuators
radius Series A pneumatic rack & pinion actuators EVOLUTION IN ENGINEERING The Series A double acting and spring return pneumatic rack and pinion actuators from Radius offer uncompromising standards of
More informationradius Series A pneumatic rack & pinion actuators
radius Series A pneumatic rack & pinion actuators EVOLUTION IN ENGINEERING Seals: Buna-N Nitrile is standard. Optional materials are available. The Series A double acting and valve and damper applications.
More informationSection 18 Butterfly Valves
Section 18 Butterfly Valves Edition 2 261 [18] BUTTERFLY VALVES Butterfly Valves Resilient seat Butterfly Valves are used in a wide range of Industries including HVAC, Gas, Petrochemical, Pulp & Paper,
More informationButterfly valves. Technical features 11 Coupling 12 Elements list 12 Tables 13 torque values 13 dimensions 15
TT series valve TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 components DN 350-500 Tables 5 dimensions 5 torque values Installation instructions
More informationPneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested
More informationRack and Pinion Actuator BR 31a Typ SRP und DAP
Forged stainless steel Rack and Pinion Actuator BR 31a Typ SRP und DAP Application: The stainless steel actuators are a corrosion resistant rack and pinion actuator particular engineered for corrosive
More informationSoft seat. Torque values tables 13 Head losses tables 14 Flange and bolts tables 15 Flanges 16 Tests 16
soft seat PD, KI Series 1 technical data 1 components DN 0-300 2 components DN 30-00 3 KI Series 4 components DN 600-800 4 KA, KX tecnical data technical data KA series 6 components DN 40-300 6 components
More information771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR
771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTIC The 771 XS wafer ball valve is dedicated to the automatic shut-off of low and medium pressure industrial fluids lines up to 16 bar. The
More informationBonded Liner Butterfly Valve Double Flanged Type Series 150
Year : Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Design Technical Data Description : GV
More informationPneumatic actuator. Inspired By Challenge
Inspired By Challenge Actuation COMPACT actuator ESD system Interfaces Ordering code system Introduction Proven advantage The COMPACT actuator is a quarter-turn rack & pinion pneumatic actuator that doubles
More informationWAYS BALL VALVES WITH ADA ACTUATOR
783-786 3-WAYS BALL VALVES WITH ADA ACTUATOR MAIN CHARACTERISTICS The three-ways flanged ball valve type 783-785 à brides is dedicated to the mixing or deviating functions in process of fluids. With full
More informationDA/SR. Pneumatic Rotary Actuators FEATURES VALBIA ISO 9001 CERTIFIED
VALBIA ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
More informationACM SERIES Pneumatic Actuators
ACM SERIES Pneumatic Actuators ATEX ACHEM Controls Add: North Service Road #., Oakville, Ontario Canada Phone: --34 Cell: 0--004 E-mail: Kevin.armstrong@achemgroup.com www.achemgroup.com Skype: achemkevin
More informationBALL VALVE WITH ADA PNEUMATIC ACTUATOR
702-703 BALL VALVE WITH ADA PNEUMATIC ACTUATOR DESCRIPTION The 702-703 ball valves are dedicated to the automatic shut off of industrial fluid s lines. It is a 3 pieces full valve with internal screws
More informationSPN II Pneumatic Actuator
SPN II Pneumatic Actuator Rack & pinion design The standard actuator configuration has an epoxy coated, hard anodized aluminum body and epoxy coated end caps Inside surface finish (Ra 0.4-0.6µm) to minimize
More informationBF Series Wafer/Lug Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901
PRATT INDUSTRIAL BF Series Wafer/Lug Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 About Pratt Industrial Pratt Industrial specializes in the design, engineering, and worldwide
More informationType 1035/El-O-Matic Rack-and-Pinion Rotary Actuator
Product Bulletin Type 1035/El-O-Matic Rack-and-Pinion Rotary Actuator Type 1035/El-O-Matic double-acting and spring-return rotary valve actuators are compact, simply-designed control devices quality-engineered
More informationVALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED SERIES 61, 14" TO 24" 61W - Wafer style and 61L - Lugged style FEATURES
VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED 61W - Wafer style and 61L - Lugged style FEATURES Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
More informationUT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series. A full range of double acting and spring return actuators designed
UT-**-DA Series UT-**-SR Series A full range of double acting and spring return actuators designed to NAMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual
More informationBUTTERFLY VALVES PTFE SEATED
BUTTERFLY VALVES PTFE SEATED ghibsonvalves.com BUTTERFLY VALVES PTFE SEATED PTFE body seat has a thickness varying from 2,5 to 3 mm depending on the position, even in the shaft area. Discs are available
More informationSoft seat. Torque values tables 13 Head losses tables 14 Flange and bolts tables 15 Flanges 16 Tests 16
soft seat PD, KI Series 1 technical data 1 components DN 50-300 2 components DN 350-500 3 KI Series 4 components DN 600-800 4 KA, KX tecnical data 5 technical data 5 KA series 6 components DN 40-300 6
More information502 brass ball valve with ADA pneumatic actuator
502 brass ball valve with ADA pneumatic actuator MAIN CHARACTERISTICS The 502 valve is a brass ball valve dedicated to the automatic shut off of lines of standard fluids like water or air. With chromed
More informationPneumatic Rack & Pinion AC-SERIES ACTUATOR
Pneumatic Rack & Pinion AC-SERIES ACTUATOR TABLE OF CONTENTS Design Features Operating Principle Parts & Materials Dimensions Torque Sheets Spring Options Measurements Sizes & How to Order 1 2 3 4 8 10
More informationHytork XL Series Technical data pneumatic Rack and Pinion actuators
Product Data sheets DOC.DSH.XL.UK Rev H January 2017 Series Technical data pneumatic Rack and Pinion actuators or from your nearest Actuation Technologies Center: Sheet No.: D66, Rev. D, Page 1 of 2 Date:
More informationUNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
More informationBUTTERFLY VALVES, BFV TYPE
BUTTERFLY VALVES, BFV TYPE In 94, our journey into the business of repairing valves and industrial instrumentation began. That journey has led us to represent and service well known American brands and
More information