BUTTERFLY VALVE 17 SERIES Gearbox

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "BUTTERFLY VALVE 17 SERIES Gearbox"

Transcription

1 DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2 H3 ØR Kg XR , XR , XR , XR , XR , XR , XR , XR , XR , XR ,42 The gearbox is calculated with a safety factor of 30% and max. differential pressure of 16 bar. For standard working conditions. OPTIONS: Limit switches, locking device, chain wheel, /09/2017

2 GENERAL FEATURES: Type: Wafer Face-to-face: API609, BS EN 558, DIN3202, ISO 5752 Flange: DIN, BS, UNI, ISO, ANSI, AS, JIS Mounting flange: ISO5211 Working pressure: PN 16 (DN40 ~ DN150), PN10 (DN200 ~ DN300), 150 PSI Application: HVAC, water supply & sewage, food & beverage, Chemical and petrochemical processing Power and utilities Paper and pulp, ship building BUTTERFLY VALVE 17 General features DESIGN STANDARDS Standards ISO 5752, API 609 Compliance DIN 3202, API 609, BS EN 558 Actuator mounting flange ISO 5211 Marking ISO 5209 TESTS AND CERTIFICATES PED/CE 97/23/EC ATEX 2 GD Pressure test API /01/2017

3 BUTTERFLY VALVE 17 General features Retaining system The shaft is retained in the body with a retaining ring, a thrust washer and two C-rings, providing a blow-out proof shaft assembly. The retaining ring may be easily removed with a standard hand tool on field assembly. Mounting flange ISO 5211 mounting flange accommodates direct mounting of all types of actuators, including handles, gear operators, electric and pneumatic actuators Shaft One-piece through shaft ensures dependability and positive disc positioning. O-ring Shaft seal provides further assurance against shaft leakage. Bushings Shaft bushings reduce torque and isolate the shaft from the valve body, preventing seizure of the shaft due to corrosion in the shaft journal. Seat / Body The tongue-and-groove seat to body retention method make field replacement simple and fast. The resilient seat features lower torque and eliminates the need for flange gaskets. Disc and shaft connection The spline or square connection eliminates shaft retention components being exposed to the line media, maximum flow is achieved. Hub seal Smooth finished disc flats mate with seat flats to give a highly efficient primary seal that prevents leakage into the shaft area. Disc Precision profile provides bubble-tight shut-off, assures minimum torque and longer seat life. 2 26/01/2017

4 BUTTERFLY VALVE 17 Materials MATERIALS: N Description Material 1 Body Ductile iron (GGG-50) 2 Seat NBR, EPDM, Viton 3 Shaft Stainless steel 410 (DN40 ~ DN150) Stainless steel 431 (DN200 ~ DN300) 4 Disc CF8M 5 Bushing PTFE 6 O-ring NBR, EPDM, Viton 7 Lever Aluminium 3 26/01/2017

5 C B A H BUTTERFLY VALVE 17 Dimensions F ØD1 DN n- d1 4 x Ød P E DIMENSIONS: (mm) DN Ø A B C F H P E d ANSI 150 DIN PN 10 DIN PN 16 ØD1 n-ød1 ØD1 n-ød1 ØD1 n-ød1 Kg /2" , ,8 50 2" , , /2" , ,5 80 3" , , " , , " , , " , , " , , " , , " , ,5 4 26/01/2017

6 BUTTERFLY VALVE 17 How to order TYPE BODY STEM DISC SEAT ACTUATOR = fix V H TYPE 17 Wafer - PN 10/16 - ANSI 150 Lug - PN 10/16 (DN40 - DN150) 27 Lug - PN10 (DN200 - DN300) ANSI - on request BODY 2 Ductile iron GGG-50 Rilsan coated STEM 3 Stainless steel AISI 410 (DN40 - DN150) Stainless steel AISI 431 (DN200 - DN300) DISC 4 Stainless steel CF8M SEAT E B V EPDM (T: -20 C C) Buna N (T: -10 C - 80 C) Viton (T: -10 C C) Kv VALUES, BREAK AWAY TORQUE: ACTUATORS DN Kv (m³/h) T (Nm) 10 bar T (Nm) 16 bar Free stem 5 H R Handle Gearbox 26/01/2017

7 GEARBOX FIG. XR GENERAL FEATURES: - Quarter turn gearbox for the operation of ball, butterfly and plug valves - Body in cast aluminium - Mounting flange acc. to ISO Removable stem drive inserts for 45 and 90 positions - Temperature range: -20 C ~ +120 C - Built in mechanical stops - IP 65 Type Ratio Output torque (Nm) Input torque (Nm) Kg : ,5 0, : , : ,7 1, : , : ,4 1 14/10/2016

8 GEARBOX Materials - FIG. XR MATERIALS: Pos. Description Material 1 Shaft Steel 2 Body Cast aluminium 3 Worm Carbon steel C45 4 Screws Steel ELVZ Insert Sintered steel 6 Quadrant Ductile iron GGG 40 7 Coverplate Cast aluminium 8 Screws Steel ELVZ Position indicator Polypropylene 2 14/10/2016

9 GEARBOX Dimensions - FIG. XR A B C D ISO 5211 L E K F G DIMENSIONS: (mm) Type A B C D E F G ØK L ISO 5211 Handwheel , F05 - F07 PS , F05 - F07 PS F07 - F10 PS F10 - F12 PS , F10 - F12 / F14 SG /10/2016

10 GEARBOX Handwheels - FIG. XR INSERTS Gearbox type Insert type ØA S VK VK VK VK VK14 32, VK17 32, VK17 45, VK19 45, VK22 45, VK24 45, VK27 45, VK VK VK VK VK VK HANDWHEELS ØK ØK Type PS ØK ØA B Type SG ØK ØA B PS SG PS SG PS SG PS SG PS SG PS SG PS SG PS SG PS SG SG /10/2016

BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg

BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg B C D BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B AD AS AD C D F Kg AS C

More information

BUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic B C D BUTTERFLY VALVE - 223 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE

More information

BR 10a Control and Shut-off Butterfly valve

BR 10a Control and Shut-off Butterfly valve M-PTFE lined double-eccentric BR 10a Control and Shut-off Butterfly valve Application: Tight-closing, double-eccentric butterfl y control valve with M-PTFE lining for process engineering and plants with

More information

KEYSTONE FIGURE 9 BUTTERFLY VALVE

KEYSTONE FIGURE 9 BUTTERFLY VALVE A resilient seated butterfly valve for general purpose applications FEATURES Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two

More information

BFV : 14 : 10 : 12 BUTTERFLY VALVE

BFV : 14 : 10 : 12 BUTTERFLY VALVE BFV : 14 : 10 : 12 BUTTERFLY VALVE Looks Like Conventional Butterfly Valve... 2 FEATURES HIGHER Cv Larger disc for larger flow Improved profile of disc provides minimum Resistance to flow BOTTOM STEM Stem

More information

Butterfly valves. Technical features 11 Coupling 12 Elements list 12 Tables 13 torque values 13 dimensions 15

Butterfly valves. Technical features 11 Coupling 12 Elements list 12 Tables 13 torque values 13 dimensions 15 TT series valve TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 components DN 350-500 Tables 5 dimensions 5 torque values Installation instructions

More information

brands you trust. XLD - Lined Butterfly Valve Series

brands you trust. XLD - Lined Butterfly Valve Series brands you trust. XLD - Lined Butterfly Valve Series PERFORMANCE We listened to our most demanding critics: Our customers. Here s our response. ANSI Class 150/PN10 valve design! Temperature Range 0 to

More information

Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation

Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation Click to see: Butterfly Valves in our Online Catalog Butterfly Valve Product Training Presentation Danfoss Flomatic Corporation REV:082303 Butterfly Valve SYLAX SERIES 149G BUTTERFLY VALVES Wafer and Lug

More information

KEYSTONE BUTTERFLY VALVE PARASEAL RANGE

KEYSTONE BUTTERFLY VALVE PARASEAL RANGE The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,

More information

Butterfly Valves. Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: Tel: Fax:

Butterfly Valves. Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: Tel: Fax: Butterfly Valves Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: 519-759-3911 Tel: 800-563-6302 Fax: 519-759-7970 www.craneenergy.com A Crane Co. Company Butterfly Valves Ordering Information

More information

BR 14b / BR 14c Application:

BR 14b / BR 14c Application: High - Performance Butterfly valve BR 14b / BR 14c Application: Tight-closing, double-eccentric butterfl y control valve especially for the chemical industry where aggressive media s are used, for example

More information

BF Series Wafer/Lug Butterfly Valves

BF Series Wafer/Lug Butterfly Valves BF Series Wafer/Lug Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 moreinfo@henrypratt.com

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut

More information

BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR

BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH RISING STEM & HANDWHEEL KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR KGV-XD FULLY LUGGED WITH BONNET & HADNWHEEL The XD model knife gate is a Bi-directional

More information

Series 240 Pneumatic On-off Valve Type 3351

Series 240 Pneumatic On-off Valve Type 3351 Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal

More information

General information. Marking ISO 5209:... General purpose industrial valves. Marking (Equivalent to EN 19)

General information. Marking ISO 5209:... General purpose industrial valves. Marking (Equivalent to EN 19) FIVC Butterfly valves are designed by European standards. Enclosed a list of references that fulfil complete or partially depending of each case. Valve dimensions UNE-EN 593:... Industrial valves. Metallic

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1. * according to DN

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1. * according to DN Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 300 Between flanges PN6,PN10/16,Class 150,JIS10K* -10 C + 80 C Max Pressure : 16 Bars Specifications : Long neck for isolation

More information

VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED SERIES 61, 14" TO 24" 61W - Wafer style and 61L - Lugged style FEATURES

VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED SERIES 61, 14 TO 24 61W - Wafer style and 61L - Lugged style FEATURES VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED 61W - Wafer style and 61L - Lugged style FEATURES Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life

More information

Uniwat. Resilient Seated Gate Valves

Uniwat. Resilient Seated Gate Valves Uniwat Resilient Seated Gate Valves www.comeval.es Resilent Seated Gate Valves - UNIWAT 504/507 Copyright COMEVAL VALVE SYSTEMS - Data subject to revision - Regularly updated data on www.comeval.es - DS01

More information

Lined Butterfly Valve Pfeiffer Type BR 10a

Lined Butterfly Valve Pfeiffer Type BR 10a Lined Butterfly Valve Pfeiffer Type BR 10a Application Tight closing, double eccentric butterfly valve with PTFE lining for process engineering and plants with industrial requirements, especially suitable

More information

Motorized Butterfly Valve

Motorized Butterfly Valve Motorized Butterfly Valve Actuated butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN500) for PN16 type For On-Off Control Manual override non-clutch design. Manual operation can be operated

More information

BF Series Wafer/Lug Butterfly Valves

BF Series Wafer/Lug Butterfly Valves BF Series Wafer/Lug Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years

More information

1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED SERIES 20/21 Wafer/Lug 1-20 (25mm-500mm) The High Performance Company SERIES 20 1-20 (25mm-500mm) Bray Controls is proud to offer a high quality

More information

Wafer, Semi Lug, Lug and Flanged Type

Wafer, Semi Lug, Lug and Flanged Type Year : Wafer, Semi ug, ug and Flanged Type API 607 Fire Safe Page 1 Year : Description Specification : GVC double eccentric High Performance butterfly valves suitable for bi-directional flow and bubble

More information

Materials : Ductile iron body EN GJS

Materials : Ductile iron body EN GJS Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16, Class 150 and JIS10K* - 10 C + 110 C Max Pressure : 16 Bars up to DN300 (10 bars over) Specifications

More information

Electric Actuated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 lb 2 to 6 inch Pipe

Electric Actuated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 lb 2 to 6 inch Pipe Electric Actuated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 lb 2 to 6 inch Pipe SERIES Features Wafer butterfly valve with ISO5211 direct mount actuator Unique wave line seat reduces torque

More information

butterfly valves Quality, Service A history of and Innovation

butterfly valves Quality, Service A history of and Innovation A history of Quality, Service and Innovation Now in its ninth decade, Conbraco Industries, Inc. is a leading manufacturer of flow control products for U.S. and international markets. The company s headquarters

More information

VALVE COMPANY WAFER & LUG TYPE BUTTERFLY VALVES

VALVE COMPANY WAFER & LUG TYPE BUTTERFLY VALVES VALVE COMPANY WAFER & LUG TYPE BUTTERFLY VALVES GENERAL CHARACTERISTICS: BS EN 593 CONSTRUCTION: Body: ENGJL Cast Iron (GG25) Disc : Stainless Steel Seat : EPDM, NBR, FPM (Viton) Stem : XCr13 (Stainless

More information

R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition

R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off

More information

Keystone resilient seated butterfly valves Figure 221 and 222

Keystone resilient seated butterfly valves Figure 221 and 222 Figure 221 and 222 An economical bonded resilient seated butterfly valve for bi-directional and end-of-line service F221 Wafer style valve F222 Lugged style valve Features Bubble tight shut-off at full

More information

Butterfly valves. ARI-ZIVA -Z - Fig Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range

Butterfly valves. ARI-ZIVA -Z - Fig Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -Z / ARI-ZIVA -G Butterfly valves ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly

More information

The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications.

The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications. The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications. Features Wafer and lugged body design with face-to-face dimension, according to

More information

NAF-Setball ball sector valves DN , PN 10-40, ANSI Class

NAF-Setball ball sector valves DN , PN 10-40, ANSI Class NAF-Setball ball sector valves DN 25-400, PN 10-40, ANSI Class 150-300 Fk 41.51(12)GB 4.98 Replaces Fk 41.51(1GB 12.97 Primary characteristics NAF-Setball is a ball sector valve with metal-to-metal or

More information

61W - Wafer style resilient seated butterfly valves 61L - Lugged style resilient seated butterfly valves

61W - Wafer style resilient seated butterfly valves 61L - Lugged style resilient seated butterfly valves 61W - Wafer style resilient seated butterfly valves 61L - Lugged style resilient seated butterfly valves Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life

More information

RESILIENT SEATED BUTTERFLY VALVES

RESILIENT SEATED BUTTERFLY VALVES SERIES 900 PN 6/10/16 // Class 150 DN 32 1600 (NPS 1¼ 64) Industrial applications Water, chemicals Oil & gas, air RESILIENT SEATED BUTTERFLY VALVES WWW.ABOVALVE.COM GENERAL INFORMATION INTRODUCTION TO

More information

DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7

DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7 DOULE-ECCENTRIC UTTERFLY VALVES TYPE L32.7 Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through

More information

Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a

Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN

More information

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

2-20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2-20 (50mm-500mm) The High Performance Company SERIES 30/31 2-20 (50mm-500mm) Bray Controls is proud to offer a high quality line of butterfly valves

More information

Butterfly Valves T5 (Wafer) and T6 (Lugged) Series

Butterfly Valves T5 (Wafer) and T6 (Lugged) Series Butterfly Valves T5 (Wafer) and T6 (Lugged) Series 50-600mm size range Cartridge type replaceable seat Full Vacuum to 16 bar pressure range (up to 300mm sizes) Universal flanging compatibility on wafer

More information

PDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging

PDC Elastomer Lined Series 27 Butterfly Valve 2 thru 36 for 125/150 lb. Flanging PDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging General Description: The PDC "Elastomer Lined" series butterfly valves are available in both full lug and wafer styles.

More information

Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI

Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical

More information

TABLE OF CONTENTS CONCENTRIC TYPE 9 HIGH PERFORMANCE 21 TRIPLE OFFSET 31 SPECIAL BUTTERFLY VALVE 67 TECHNICAL FEATURES 73

TABLE OF CONTENTS CONCENTRIC TYPE 9 HIGH PERFORMANCE 21 TRIPLE OFFSET 31 SPECIAL BUTTERFLY VALVE 67 TECHNICAL FEATURES 73 BUTTERFLY VALVES The information in this catalog is correct except for error or omission and could be changed without notice. Ref.: BUTTERFLY-202014 TABLE OF CONTENTS CONCENTRIC TYPE 9 HIGH PERFORMANCE

More information

2"- 20" (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES CELEBRATING. The High Performance Company

2- 20 (50mm-500mm) SERIES 30/31 Wafer/Lug RESILIENT SEATED BUTTERFLY VALVES CELEBRATING. The High Performance Company BUTTERFLY VALVES RESILIENT SEATED SERIES 30/31 Wafer/Lug 2"- 20" (50mm-500mm) CELEBRATING Y E A R S The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality

More information

2"- 20" (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company

2- 20 (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company butterfly valves resilient seated series 30/31 Wafer/Lug 2"- 20" (50mm-500mm) The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality line of butterfly

More information

2"- 20" (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company

2- 20 (50mm-500mm) series 30/31 Wafer/Lug. butterfly valves. resilient seated. The High Performance Company butterfly valves resilient seated series 30/31 Wafer/Lug 2"- 20" (50mm-500mm) The High Performance Company SERIES 30 2" 20" (50mm 500mm) Bray Controls is proud to offer a high quality line of butterfly

More information

BIANCA - Butterfly valve DN Description. Product features

BIANCA - Butterfly valve DN Description. Product features Description Centric butterfly valve plastomer lined for On/off and control service for aggressive and corrosive fluids and high purity application Product features Body construction B1 Wafer DN 32-600

More information

with electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE

with electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE with electric and pneumatic actuators Stop valve in straightway form DN 300-500 ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE Electric multiturn actuator capable of high closing pressures Enclosure

More information

CLASS 400 FORGED BRASS BALL VALVE

CLASS 400 FORGED BRASS BALL VALVE CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:

More information

Grooved Butterfly Valves

Grooved Butterfly Valves Grooved Butterfly Valves Design Rating: PN10, PN16 Design: UNE EN 539 Grooving dimensions: ANSI/ AWWA C 606 97 Face to face: MSS SP 67 Piping assembling: ANSI B3610, ISO 4200, DIN 2448, BS 1387, BS 3600

More information

F low L ine 72/73 Wafer & Lug Style Sizes 2-24

F low L ine 72/73 Wafer & Lug Style Sizes 2-24 F low L ine 72/73 Wafer & Lug Style Sizes 2-24 Cartridge Seated Butterfly Valves KEY FEATURES Body One piece wafer and lugged body for strength and stability in extreme environments Wafer bodies have a

More information

DESPONIA - Butterfly valve DN Description. Product features

DESPONIA - Butterfly valve DN Description. Product features Description Centric butterfly valve with elastomer liner for liquids and gases in the industrial range, general services, water treatment,... Product features Body construction D1 Wafer DN 25-800 D3 Lug

More information

BUTTERFLY VALVE WITH ADA PNEUMATIC ACTUATOR

BUTTERFLY VALVE WITH ADA PNEUMATIC ACTUATOR 1121-1125 BUTTERFLY VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CARACTERISTICS The 1121 to 1125 wafer butterfly valves are dedicated to the automatic shut-off of medium pressure industrial fluids lines up to

More information

SIL. BIANCA - Butterfly valve DN Description. Product features

SIL. BIANCA - Butterfly valve DN Description. Product features Description Centric butterfly valve plastomer lined for On/Off and control service for aggressive and corrosive fluids and high purity application Product features Body construction B1 Wafer DN 3-600 B3

More information

Butterfly Valves. watts.com

Butterfly Valves. watts.com Butterfly Valves watts.com Durafil is a registered trademark of Cargill, Limited. Teflon is a registered trademark of the E.I. Dupont de Nemours & Company, Incorporated. Uniseal is a registered trademark

More information

Series 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve

Series 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN

More information

NAF-Torex butterfly valves DN , Size 3-28, PN 10-40, ANSI Class 150, 300

NAF-Torex butterfly valves DN , Size 3-28, PN 10-40, ANSI Class 150, 300 NAF-Torex butterfly valves DN 80-700, Size 3-28, PN 10-40, ANSI Class 150, 300 Fk 41.42(18)GB 11.04 Primary characteristics NAF-Torex, High-Performance butterfly valve is available with either metal-to-metal

More information

Technical Manual. Register 8 CONTENTS - ARV2

Technical Manual. Register 8 CONTENTS - ARV2 Page: 1 Register 8 CONTENTS - ARV2 Contents Page Technical Data ARV2-DIN... 2 Technical Data ARV2-ANSI... 3 Material Specification ARV2... 4 Dimensions ARV2-DIN... 5 Dimensions ARV2-ANSI... 6 Spare Parts

More information

Installation Operation Maintenance. LSSN Butterfly Valve AGA Approved 50MM - 150MM. QAD#IM6055.REVA

Installation Operation Maintenance. LSSN Butterfly Valve AGA Approved 50MM - 150MM.  QAD#IM6055.REVA LSSN Butterfly Valve Installation Operation Maintenance Licence Number: 5326 www.challengervalves.com.au 1 Index 1. INTRODUCTION 1.1 Design Features 3 1.2 Flange and Pipe Compatibility 4 1.3 Operating

More information

ELARA - Butterfly valve DN Description. Product features

ELARA - Butterfly valve DN Description. Product features Description Double eccentric butterfly valve in 3 variations of sealing TG with PTFE+25% glass fibre seat TI Fire Safe IN with metal seat Application fields: industrial and petrochemical range Product

More information

MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE

MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,

More information

UKAS ISO 9001:2000. An Integrally Moulded Liner Design

UKAS ISO 9001:2000. An Integrally Moulded Liner Design QUALITY UKAS MANAGEMENT 0 0 8 ISO 9001:2000 0 0 6 2 Butterfly Valves An Integrally Moulded Liner Design Design Features Advance Butterfly Valves are designed and manufactured to have optimal mix of structural

More information

AVK (WWE) BUTTERFLY VALVE DN (3" to 32") 75 (EVML)

AVK (WWE) BUTTERFLY VALVE DN (3 to 32) 75 (EVML) AVK (WWE) BUTTERFLY VALVE DN 80 800 (3" to 32") 75 (EVML) Mono flanged type Overall length DN 80300 to ISO 5752 long, basic series 16 (BS 5155 wafer long, DIN 3202K3), Overall length DN 3501000 to ISO

More information

AVK (WWE) BUTTERFLY VALVE DN (2" to 56") 75 (EVS)

AVK (WWE) BUTTERFLY VALVE DN (2 to 56) 75 (EVS) AVK (WWE) BUTTERFLY VALVE DN 50 1400 (2" to 56") 75 (EVS) Wafer type Face to face dimension to ISO 5752 short, basic series 20 (BS 5155 wafer short, DIN 3202K1) Flange connection to ISO 70052 (BS EN 10922,

More information

Prem Chem Butterfly Valves

Prem Chem Butterfly Valves 10 butterfly Valves Prem Chem Butterfly Valves butterfly Valves 11 Design standards: gb12238, API609, MSS SP-67, MSS SP-68 Butterfly valves have become very popular because of compactness, weight and ease

More information

VALlctlRe l-wav liujflf~r FrLV VAL'6~~

VALlctlRe l-wav liujflf~r FrLV VAL'6~~ VALlctlRe l-wav liujflf~r FrLV VAL'6~~ 1 s~~~~s 1smm.l NOTES: 1. The valves are rated at 100 PSI pressure differential in the closed position. 2. Standard valves are furnished with lugs tapped as shown,

More information

High Performance Butterfly Valves

High Performance Butterfly Valves Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6

More information

ARI-STEVI 470 / ANSI (DN25-200)

ARI-STEVI 470 / ANSI (DN25-200) ARI-STEVI 470 / 471 - ANSI (DN25-200) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem With pneumatic and electric actuators ARI-STEVI 470 / 471 - ANSI

More information

NAF-Torex butterfly valves DN , Size 3-28, PN 10-40, ANSI Class 150, 300

NAF-Torex butterfly valves DN , Size 3-28, PN 10-40, ANSI Class 150, 300 NAF-Torex butterfly valves DN 80-700, Size 3-28, PN 10-40, ANSI Class 150, 300 Fk 41.42(17)GB 08.01 Primary characteristics NAF-Torex, High-Performance butterfl y valve is available with either metal-to-metal

More information

DJ Series Butterfly Valves

DJ Series Butterfly Valves DJ Series Butterfly Valves European Edition Flange Table Wafer Lugged :Standard mounting :Special mounting (Proper centering is required) :Not coverd by standard DJ series Explanation of Product Code G

More information

DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS

DeZURIK BOS-US 2-20 (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS BULLETIN 46.00-2B OCTOBER 2015 DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS - Materials of Construction - Specifications - Ordering - Dimensions

More information

ACE VALVE COMPANY LIMITED

ACE VALVE COMPANY LIMITED ACE VALVE COMPANY LIMITED Http://www.acevalve.co.kr 2013.04. ACE VALVE CATALOG 278-4 Mangdeokri, Juchonmyun, Gimhae, Gyeongnam, Korea. TEL +82--310-0 FAX +82--329-06~8 E-mail acevalve@acevalve.co.kr Homepage

More information

Series 3331 Pneumatic Control Butterfly Valve Type 3331/BR 31a

Series 3331 Pneumatic Control Butterfly Valve Type 3331/BR 31a Series 3331 Pneumatic Control Butterfly Valve Type 3331/BR 31a Application Control butterfly valve for use in process engineering and industrial applications to meet high demands Suitable for liquids,

More information

RESILIENT SEATED. Butterfly Valves

RESILIENT SEATED. Butterfly Valves R CONTROLS INDEX RESILIENT SEATED Butterfly Valves INDEX Butterfly Valves Page Series 20 wafer 1-20 (25mm-500mm) 150 psi (10.3 Bar) 8 Series 21 lug 1-20 (25mm-500mm) 150 psi (10.3 Bar) 8 Series 22 wafer

More information

VALVES WITH NA ELECTRIC ACTUATOR

VALVES WITH NA ELECTRIC ACTUATOR 505-507 VALVES WITH NA ELECTRIC ACTUATOR CHARACTERISTICS The 505+NA and 507+NA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.

More information

Series 8500 Grayline Butterfly Valves

Series 8500 Grayline Butterfly Valves Series 8500 Grayline Butterfly Valves Features State-of-the-Art Manufacturing: Valves are produced using state-of-the-art manufacturing equipment. Each valve is tested to 110% of rated working pressure

More information

RESILIENT SEATED BUTTERFLY VALVES

RESILIENT SEATED BUTTERFLY VALVES GRIP THAT HOLDS SERIES 900 // PN 6/10/16/Class 150 // DN 32-1600 (1 ¼ - 64 ) // Industrial applications // Water, chemicals, gas // Oil & gas, air RESILIENT SEATED BUTTERFLY VALVES WWW.ABOVALVE.COM GENERAL

More information

NON-RETURN VALVE RT25

NON-RETURN VALVE RT25 NON-RETURN VALVE RT25 DESCRIPTION The RT25 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate. Connections are female screwed MAIN

More information

ISO-DE Double Eccentric Butterfly Valves

ISO-DE Double Eccentric Butterfly Valves ISO-DE Double Eccentric Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 moreinfo@henrypratt.com

More information

Materials : Carbon steel or Stainless steel

Materials : Carbon steel or Stainless steel Size : Ends : Min Temperature : Max Temperature : DN 8 to 50 mm Threaded BSP or NPT, S.W. or B.W. -30 C in SS and -20 C in carbon steel + 220 C Max Pressure : 100 to 140 Bars Specifications : Antistatic

More information

Butterfly valve VZAF

Butterfly valve VZAF Key features and product range overview General Construction Characteristics Supplier Nominal diameter Wafer Ideal for very corrosive, InterApp DN32 DN900 VZAF-C agressive and high purity application Flow

More information

Materials : Carbon steel or stainless steel

Materials : Carbon steel or stainless steel Size : Ends : Min Temperature : Max Temperature : DN 50 to 350 mm Between flanges GN 25-20 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to API 607 Iso

More information

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-29 (Rev. 02/2016)

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-29 (Rev. 02/2016) General Description The model FKB VGU-29 brings an economic solution to block abrasive and corrosive fluid sewage for granulometry until 5mm. They are light equipments, to be installed through flanges,

More information

DN 1/4 to 4 Threaded BSP or NPT - 20 C C Max Pressure : 63 Bars ( up to DN 3/4" ) Specifications : Anti blow-out stem Locking device Full bore

DN 1/4 to 4 Threaded BSP or NPT - 20 C C Max Pressure : 63 Bars ( up to DN 3/4 ) Specifications : Anti blow-out stem Locking device Full bore Size : Ends : Min Temperature : Max Temperature : DN 1/4 to 4 Threaded BSP or NPT - 20 C + 180 C Max Pressure : 63 Bars ( up to DN 3/4" ) Specifications : Anti blow-out stem Locking device Full bore Materials

More information

WAFER Disc Check Valve

WAFER Disc Check Valve 18/04/2013 WAFER Disc Check Valve WAFER swing or tilting disc check valve (can be manufactured with flanges on request). One piece cast body which provides easy evacuation of solid particles contained

More information

GRW/GRL Sizes NPS 2-36

GRW/GRL Sizes NPS 2-36 KEYSTONE The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications. Features Wafer and lugged body design with face-toface dimension, according

More information

ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)

ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP

More information

Product Range. Products for all industrial applications

Product Range. Products for all industrial applications Product Range Products for all industrial applications CONTROL VALVES BUTTERFLY VALVES Series Description Symbol Version Page Series Description Symbol Version Page 1a Globe Valve PTFE 4 10a Double Eccentric

More information

Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling.

Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling. Modentic Industrial Corp. ISO 9001 Certified. Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling. Contents A view of valve process

More information

SV SERIES. Metal Seated Ball Valves

SV SERIES. Metal Seated Ball Valves SV SERIES Metal Seated Ball Valves 1/2 THRU 12 ANSI 150# THRU ANSI 1500# FULL PORT AND REDUCED PORT UNI-DIRECTIONAL AND BI-DIRECTIONAL 316SS OR CARBON STEEL BODY LIVE LOADED STEM PACKING HIGH QUALITY CASTINGS

More information

KEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL

KEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL heavy duty industrial resilient seated butterfly valve GRW - Wafer body design GRL - Lugged body design FETURES GENERL PPLICTION Water, air, dry bulk conveying etc. These valves are for any service where

More information

VALVES / ACTUATORS COMPLETE PRODUCT LINE / BRAYLINE ACCESSORIES. The High Performance Company

VALVES / ACTUATORS COMPLETE PRODUCT LINE / BRAYLINE ACCESSORIES. The High Performance Company VALVES / ACTUATORS COMPLETE PRODUCT LINE / BRAYLINE ACCESSORIES The High Performance Company BRAY CONTROLS Bray Controls is proud to offer our high performance, highest quality product lines. Through years

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.

More information

Two-Way Soft Seated Ball Valve Type 14-S

Two-Way Soft Seated Ball Valve Type 14-S Two-Way Soft Seated Ball Valve Type 14-S Design Characteristics Two piece body Trunnion mounted ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design

More information

KNIFE GATE VALVES -- MODEL D

KNIFE GATE VALVES -- MODEL D PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several

More information

OG HIGH PERFORMANCE TRIPLE OFFSET BUTTERFLY VALVES SHUT-OFF AND MODULATING SERVICE - SAFE AND ECONOMIC

OG HIGH PERFORMANCE TRIPLE OFFSET BUTTERFLY VALVES SHUT-OFF AND MODULATING SERVICE - SAFE AND ECONOMIC OG HIGH PERFORMANCE TRIPLE OFFSET BUTTERFLY VALVES SHUT-OFF AND MODULATING SERVICE - SAFE AND ECONOMIC 02 03 In addition to the tried and tested technology of our KX Series, Ohl Gutermuth represents the

More information

Trunnion Ball Valve Catalogue

Trunnion Ball Valve Catalogue Trunnion Ball Valve Catalogue Introduction "Fusion" is the registered trademark of Archmetal Industries, a member of the Fortune Group. * The Fortune Group is a world class producer of a full range of

More information

Lug Style Butterfly Valve Type 578

Lug Style Butterfly Valve Type 578 Lug Style Butterfly Valve Type 58 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 31 Stainless steel Lugs:

More information

Richter PFA/PTFE Shut-off and Control Butterfly Valves

Richter PFA/PTFE Shut-off and Control Butterfly Valves Richter PFA/PTFE Shut-off and Control Butterfly Valves NK, NKS, NKL, NKS-C, NKL-C New: Sizes to mm (4 ) Titanium, PE-UMW Body lining PTFE, TFM-PTFE, PTFE-L, PE-UMW Disc/stem unit PFA, PFA-L, stainless

More information

ARI-STEVI ANSI (NPS 1/2" - 2") with electric and pneumatic actuators Control valve in straightway form

ARI-STEVI ANSI (NPS 1/2 - 2) with electric and pneumatic actuators Control valve in straightway form with electric and pneumatic actuators Control valve in straightway form ARI-STEVI 440 - ANSI Pneumatic actuator ARI-DP 32-33 Reversible pneumatic actuator Actuator with rolling diaphragm Air supply pressure

More information

Product Catalogue November 2017

Product Catalogue November 2017 Product Catalogue November 207 Manual and Actuated Valves It s all at Albion Contents Brass 4 Ball Valves Way Valves Check Valves Gate Valves Strainers Press Valves 9 Ball Valves Check Valves Strainer

More information