PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3

Transcription

1 BUTTERFLY VALVES

2 PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve PN16 from -25ºC to +150ºС DN32 DN1600 PN-EN 4-5 B-1F6 B-4F Double eccentric butterfly valve Triple eccentric butterfly valve PN50 from -100ºC to +500ºC DN50 DN800 PN-EN 6-7 PN100 from -196ºC to +700ºC DN80 DN1400 PN-EN, API 8-9 1

3 CHARACTERISTIC: Diameter mm; (1 ¼ - 8 ) Pressure - 16 bar; Temperature - from -10ºC up to +130 ºC Centric butterfly valve B-599 VERSIONS: type / conections / body material / disc material / seat / others Example: B-599 / W / Z / 0 / 1 Connection Sign Body material Sign Disc material Sign Seat Sign Brass 0 NBR (-10ºC +80ºC) 1 Inter-flanged W Grey cast iron GG25 Z Aluminium bronze 1 EPDM (-10ºC +130ºC) 2 (WAFER) Stainless steel AISI Flanged (LUG) L Other versions available on request * Ductile cast iron GGG40 3 Stainless steel AISI APPLICATION: Butterfly valves are used to shut off and control the flow of liquids, gases, and other mixtures of powdered media. Dampers have a perfect seal, the short length of the building, light weight and easy to install. Overall length according to ISO 5752/20, EN558-1/5, BS 5155/4. In addition, the dampers can have join the drive to ISO Dampers meet the safety requirements according to Pressure Equipment Directive 97/23/EC for fluids of the groups 1 and 2. TECHNICAL PARAMETERS: Max. working pressure DN 32 DN bar Note: If the fluid temperature exceeds 120 C, the maximum allowable operating pressure is reduced from 16 bar to 14.4 bar with 10 bar to 9 bar. Nr Materials 1 Body Grey cast iron GG25+epoxy coating 2 Disc See table 3 Seat See table 4 Stem Stainless steel 13%Cr 5 Pivot Stainless steel 13%Cr 6 O-ring Delrin 2

4 DIMENSIONS: DN 32 DN 200 DN mm NPS inch 1 ¼ 1 ½ 2 2 ½ Dimensions Weight (kg) A , ,5 192, B C D E F W 2,1 2,1 2,8 3,3 3,8 4,7 6,8 9,1 14,4 L 2,8 2,8 3,6 4,2 5,4 6,4 9 10,6 18 Butterfly valves can be equipped with following accessories: Worm gear Electric drive 24V, 230V, 380V Pneumatic: single action or double action 3

5 Centric butterfly valve B-099 CHARACTERISTIC: Diameter mm; (1 ¼ - 24 ) Pressure - 16 bar; Temperature - from -25 ºC up to +150 ºC VERSIONS: type / conections / body material / disc material / seat / others Example: B-099 / W / Z / 0 / 1 Connection Sign Materiał korpusu Sign Materiał dysku Sign Gniazdo Sign Brass 0 NBR (-10ºC 80ºC) 1 Inter-flanged Aluminium bronze 1 EPDM (-25ºC 125ºC) 2 W Ductile cast iron GGG40 Z (WAFER) Natural rubber (NR) Stainless steel AISI (-15ºC 60ºC) Ductile cast iron GGG40 3 VITON (FPM) (-25ºC 150ºC) 4 Flanged (LUG) L Silicone for steam Stainless steel AISI Other versions available (-25ºC 140ºC) - on request Silicone (UMQ) HASTELLOY 5 6 (-25ºC 150ºC) URANUS B6 6 HYPALON (CSM) Titanium 7 (-15ºC 120ºC) 7 APPLICATION: Butterfly valves are used to shut off and control the flow of liquids, gases, and other mixtures of powdered media. Dampers have a perfect seal, the short length of the building, light weight and easy to install. Overall length according to ISO 5752/20, EN558-1/5, BS 5155/4. In addition, valves can have join the drive to ISO Valves meet the safety requirements according to Pressure Equipment Directive 97/23/EC for fluids of the groups 1 and 2. TECHNICAL PARAMETERS: Max. working pressure DN 32 DN 300 DN 350 DN bar 10 bar* *16 bar after technical approval of working conditions Note: If the fluid temperature exceeds 120 C, the maximum allowable operating pressure is reduced from 16 bar to 14.4 bar with 10 bar to 9 bar. Nr Materials 1 Body Ductile cast iron GGG40+epoxy coating, carbon steel or stainless steel 2 Disc See table 3 Stem Stainless steel Pivot Stainless steel Seat See table 6 O-ring Brass or Delrin 7 Washer Carbon steel+zinc coating or stainless steel 8 Stem O-ring NBR 9 Pivot O-ring NBR 10 Pin Carbon steel+zinc coating or stainless steel 11 Pivot washer Stainless steel 12 Stem washer Stainless steel 4

6 DIMENSIONS: DN 32 DN 600 LUG WAFER DN mm NPS inch 1 ¼ 1 ½ 2 2 ½ W Version A , ,5 192, L B Dimensions: Weight (kg) C D E W 2,1 2,1 3,2 3,8 4,2 5 7,9 9,2 13,5 22, L 2,2 2,2 4,1 4,9 5,6 6,8 9,1 11,2 15,5 28,7 40, DN 700 DN 1600 DN mm NPS inch Double flanged A B Dimensions C D Weight (kg)

7 Double eccentric butterfly valves B-1F6 CHARACTERISTIC: Diameter mm; Pressure - 50 bar; Temperature from -100 ºC up to +500 ºC (for body material 216 WCB from -29 ºC) VERSIONS: type / conections / body material / disc material / seat / others Example: B-1F6 / W / Z / 0 / 1 Connection Sign Body material Sign Disc material Inter-flanged (WAFER) W A216 WCB Z Flanged (LUG) L A351 CF8M (1.4408) K Sig n A351 CF8M (1.4408) 0 Other versions available on request Seat Sign PTFE 1 FIRE SAFE (PTFE+metal) FS - Metal-metal MM APPLICATION: Butterfly valves are used to shut off and control the flow of liquids, gases, and other mixtures of powdered media. Dampers have a perfect seal, the short length of the building, light weight and easy to install. Overall length according to ISO 5752/20, EN558-1/5, BS 5155/4. In addition, the dampers can have join the drive to ISO Dampers meet the safety requirements according to Pressure Equipment Directive 97/23/EC for fluids of the groups 1 and 2 Are available in 94/9/EC ATEX Zone 1 and 21 - and 21 Group 1, Category 2 G. Gas-tight PTFE for sealing and FIRE SAFE EN /P12, tightness class A metal-to-metal sealing: leakage class C. DIMENSIONS: DN 50 DN 125 DN d1 d2 A B C D1 D3 s1 s2 E G ISO 5211 y b t.b kg t.t kg F ,3 7, F , F , F ,7 12, F ,7 6

8 DN 150 D N 400 DN d1 D2 A B C D1 D3 s1 s2 E G ISO 5211 y b t.b kg t.t kg F F F F F F CONNECTIONS WAFER: DN NPS 2 2 1/ PN 10 PN 16 PN 25 PN 40 Class 150 Class 300 TECHNICAL PARAMETERS: DN50-DN bar Working pressure DN125-DN bar DN250-DN bar Working temperature from -50ºC to +200 ºC PTFE* *Min. working temperature with body WCB -29 ºC Working pressure DN50-DN bar Working temperature from -100ºC to +500 ºC Metal-metal* *Work temperature with body WCB -29 ºC to +425 ºC Working pressure DN50-DN bar Working temperature from -50ºC to +200 ºC FIRE SAFE* *Min. working temperature with body WCB -29 ºC 7

9 Triple eccentric butterfly valves B-4F CHARACTERISTIC: Diameter mm; Pressure bar; Temperature - from -196 ºC up to +700 ºC VERSIONS: type / conections / body material / disc material / seat / others Example : B-4F / W / Z / 0 / 1 Connection Sign Body material Sign Disc material Sign Seat Sign Inter-flanged A216 WCB Heat-resisting W Z A216 WCB 1 (WAFER) (1.0625) 0 steel (1.4845) (1.0625)+Stelit Gr.21 Flanged (LUG) L Heat-resisting A351 CF8M K A351 CF8M (1.4404) steel 2 Double flanged DK (1.4404) 1 )+Stelit Gr.21 (1.4845)+graphite For welding p *other materials at request APPLICATION: Butterfly valves are used to shut off and control the flow of liquids, gases, and other mixtures of powdered media. Butterfly valves have a perfect seal, the short length of the building, light weight and easy to install. Overall length according to ISO 5752, EN558-1/5 In addition, the dampers can have join the drive to ISO Butterfly valves meet the safety requirements according to Pressure Equipment Directive 97/23/EC for fluids of the groups 1 and 2 Are available in 94/9/EC ATEX Zone 1 and 21 - and 21 Group 1, Category 2 G. Flanges drilled according to PN and Class 150, 300, 600, 900. Triple eccentric butterfly valves B-4F are designed and constructed so that they can be used in plants with high requirements for security, reliability and minimal maintenance. The main field of application is the heating (steam, condensate), are used to the media at a high temperature (up to +700 C) and pressure (up to 100 bar). DESIGN: 8

10 DIMENSIONS: DN80 DN700 DN A B Ød pin 5x5x30 6x6x40 8x7x50 10x8x60 12x8x65 14x9x70 16x10x75 18x11x80 18x11x90 20x12x105 24x14x105 28x16x14 0 h E C n ØL 6, ØK ISO top flange F05 F07 F12 F14 F14 F16 F16 F16 F25 F25 F25 F30 W Building L length F to F DK W Class Class ØD* L Class Class DK Note: Specifications dampers with diameters from DN 800 to DN 1400 from the manufacturer. A plot of the pressure / temperature - available on request from the manufacturer. *) External dimension of the body. 9

11