BALL SECTOR VALVE of stainless steel 455 (459) series
|
|
|
- Merry Greene
- 5 years ago
- Views:
Transcription
1 Operation C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and crystallizing mediums, because of cleaning function of metal seat for both control and on/off applications where std PTFE seated valves does not lasting. If the medium contains solid particles, the geometry of metal seat and segment will warranty better function as std. valves. The ball valve series 59 is a tank outlet valve and is a variation of the valve 55 series which incorporates a short body section thereby reducing dead area above the seat. The single seat design eliminates the possibility of media becoming trapped in the valve body. These valves are tight to one direction which is shown by an arrow according to EN 1-1. The sector ball valve with flanges has a full bore design. The two piece body, v-port ball and stems are. The shaft packing box has tightable graphite seals. Nominal dimensions: (55 valve) - DN 5 00, (59 valve) - DN5 00 * Nominal pressure PN1bar Ball seal alternatives Stellite (KC) PTFE (TC) Tightness class ISO 50, EN 1-1 RATE D RATE A Working temperature of liquid media (version for steam also available) +0 C -0 C +00 C -0 C * Connection Between flanges: EN109-1, Facing Type B. PN1, PN10, ANSI CLASS 150. Safety Conform to the requirements of the Council Directive 97//EC on Pressure Equipment, marking: Class: gas, group 1. Explosion-proof design is available as per special order. Marking in accordance to ATEX Directive 9/9/EC: group II GD, protection concept of non-electrical components: c T. *) Flange drilling for others standards and pressures are also available as per special order. Consult factory for details. Page 1 of 7
2 Exploded view TC Parts list and standard materials KC Part Material 1 Body Stainless steel ASTM A51 CFM Body flange Stainless steel ASTM A51 CFM V-ball Stainless steel ASTM A51 CFM Stem Stainless steel Subshaft Stainless steel 1.0 Gland Stainless steel Spacer ring Stainless steel 1.0 Subshaft cover Stainless steel Thrust bearing ring Stainless steel Thrust bearing plate Stainless steel Shaft bearing PTFE on stainless steel net ( Pampus ) 1 Upper thrust bearing PTFE on stainless steel net ( Pampus ) 1 Lower thrust bearing PTFE on stainless steel net ( Pampus ) 1 Cup spring Stainless steel , 1 Shim Carbon Fibre SFS511/ Graphite 17 Subshaft cover packing Carbon Fibre SFS511/ Graphite 1 Packing Graphite 19 O-ring EPDM 0 Bolt or stud and nut Stainless steel ISO 50 A-0 1 Stud Stainless steel ISO 50 A-0 Hexagonal socket screw Stainless steel ISO 50 A-0 Nut Stainless steel ISO 50 A-0 5 Seat Stellite Seat PTFE 7 Support ring Stainless steel 1.0 Shim Carbon Fibre SFS511/ Graphite 9 Key Carbon steel Page of 7
3 Dimensions: 55 series valve DN L H1 H h d D Connection PN1 Dr hole Ø Weight pcs kg Page of 7
4 Dimensions: 59 series valve DN L l H1 H h Ød ØD Bottom flange Drilling PN1 ØD s Ød Øk Ødl pcs Weight kg Operation Högfors valves can be equipped with an actuator to your specification. bare shaft, manual gear, electric actuator, pneumatic or hydraulic actuator. Operation torque Torque*, Nm (KC and TC) *) for steam use the next size Nm up. KC and TC DN Page of 7
5 Handlever Sizes DN can be operated with handlever. The opening and closing of valves is stepless. The valve is open when the handlever is in line with pipe. DN L l H h Manual gear Opening and closing of the valves from the handwheel. The position of the ball can be seen on a position indicator on top of the gear DN Pro-Gear model a b c d L D h 5 Q Q Q Q Q Q Q Q Q Q Q Q Page 5 of 7
6 Pressure / Temperature Rating The max pressure difference depends on the working temperature of liquid media. 5.5 Pressure (bar) Pressure (MPa) TC KC Temperature of liquid ( C) Product codes Ball sector valve Tank outlet valve Seat PTFE Stellite PTFE Stellite handlever up to DN150 55TC. 55KC. 59TC. 59KC. bare shaft 55TC Z 55KC Z 59TC Z 59KC Z manual gear 55TC M 55KC M 59TC M 59TC M Steam version on special order 5501KC How to order Body material: Valve type: Special options: Ball seal Ball surface treatment Size DN Operation: Stainless steel 55 ball sector valve with flanges 59 ball sector valve for tank outlet standard, 01 - For steam (K) - Stellite, (T) - PTFE C hard chrome ( _ ) - handlever, (Z) - bare shaft, (M) - manual gear K C 00 M Page of 7
7 Flow curves Indicating typical Kv value. Kv DN 00 DN 50 DN 00 DN 150 DN 15 DN 100 DN 0 DN 5 DN 50 DN 0 DN DN 5 Kv α WATER: Volume flow: α Flow velocity: Page 7 of 7
BALL SECTOR VALVE of stainless steel 455 (459) series
Operation C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and
BALL SECTOR VALVE of stainless steel 455 series
C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and crystallizing
R o L. WAFER PATTERN V-PORT BALL VALVE stainless steel 465 series SILVER LINE. Operation. Description. Edition
Operation WAFER PATTERN V-PORT BALL VALVE stainless steel C ont R o L Description Edition Högfors ball sector valve series 465 is specially designed for control applications of various medium like liquids,
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
BUTTERFLY VALVE WAFER TYPE of carbon steel ( ) series
Operation WAFER TYPE of carbon steel 1100 (1000-100) series C ont R o L Operation Edition 0-0-009 Wafer type butterfly valve 1100 (1000 100) series is used in industrial pipelines for demanding on-off
BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition
of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
Rate B standard. Rate A Rate A option. max +260 C/ min -40 C
of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off
BALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 20-02-2015 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
FULL BORE BALL VALVE of carbon steel with welded ends / flanges and series
FULL BORE BALL VALVE with welded ends / flanges 32000 and 32500 series C ont R o L Description Edition Ball valves series 32000 32500 are a tight on-off valves and suitable for liquid pipe systems. Such
BALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 05-07-2016 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
R o L. BALL VALVE of stainless steel with welded / threaded / flanges ends 440, 442, 443, 445 series SILVER LINE. Description. Edition
with welded / threaded / flanges ends C ont R o L Description Ball valve 440-445 series used for on/off services a wide range of applications in the chemical and process industries. It is used for oil,
LONG STEM BALL VALVE of carbon steel with welded ends series
with welded ends 38000 series C ont R o L Description Edition 05-07-2016 Ball valve series 38000 tested according to the EN488 standard and fulfill the requirements of this standard. Tight on-off valve
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
NAF-Setball ball sector valves DN , PN 10-40, ANSI Class
NAF-Setball ball sector valves DN 25-400, PN 10-40, ANSI Class 150-300 Fk 41.51(12)GB 4.98 Replaces Fk 41.51(1GB 12.97 Primary characteristics NAF-Setball is a ball sector valve with metal-to-metal or
Triple Eccentric Control and Shut-off Butterfly Valve Series 14t
Application: Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Triple eccentric butterfly valve providing excellent shut-off in all industrial applications: Nominal size DN 80 to DN 400
NORI 320 Globe valves PN DN Application Standard variants Operating data Materials Remarks Design
Type series booklet 7653.1/8-10 NORI 320 Globe valves with gland packing with non-turning stem flanged or butt-weld ends ZXLF ZXSF PN 250-320 DN 65-200 Application In industrial plants, power stations,
NAF-Duball ball valves
NAF-Duball ball valves 25-400, Size 1-16 PN 10-40, ANSI Class 150-300 Fk 41.61(22)GB 07.12 Primary characteristics NAF-Duball is a full-bore ball valve which, due to its design and combination of materials,
NAF-Setball ball sector valves DN , PN 10-40, ANSI Class Fk 41.51(15)GB 03.10
NAF-Setball ball sector valves DN -0, PN 0-, ANSI Class 0-0 Fk 4.()GB 03.0 Primary characteristics NAF-Setball is a ball sector valve with metal-to-metal or metal-to-ptfe seating. The NAF-Setball combines
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
DOULE-ECCENTRIC UTTERFLY VALVES TYPE L32.7 Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
Ball Valve VM Options. General. Modular selection of system components. steel or stainless steel DN PN 100/40 flanges
Ball Valve VM 4460-4466 steel or stainless steel DN 15-200 PN 100/40 flanges General 2-piece ball valve with a unique sealing element design. Modular selection of system components. Supports pressurization
Ball segment valve Edition:
Datasheet Ball segment valve Edition: 2012-07 Type KVTF-C/KVXF-C Flanged design Short face to face Nominal pressure PN 25 / ASME Class 150 Nominal size DN 80-400 / NPS 3-16 Material Stainless steel Control-
NAF-Trunnball ball valves
NAF-Trunnball ball valves DN 150-800, Size 6-32 PN 10-40, ANSI Class 150-300 Fk 41.66(1)GB 07.12 Primary characteristics NAF-Trunnball is a trunnion ball valve with full-bore. It is designed to give a
Drain ball valve BR 21a
PTFE - lined Drain ball valve BR 21a Application: Tight-closing PTFE-lined drain ball valve for corrosive media, especially for high process demand in chemical plants: Nominal sizes DN 50 to DN 150 Nominal
marine cargo systems Edition:
Butterfly valves for Si-206 EN marine cargo systems Edition: 2007-05 Type MTV Type MTVL Wafer design Lugged design Nominal pressure PN 10-25 ANSI 150 Nominal size DN 80-400 Material Stainless steel The
with electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE
with electric and pneumatic actuators Stop valve in straightway form DN 300-500 ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE Electric multiturn actuator capable of high closing pressures Enclosure
NAF-Triball ball valve DN for max. 40bar. Fk (9)GB 03.03
NAF-Triball ball valve - 0 for max. bar Fk.6(9)GB 03.03 Primary characteristics NAF-Triball is a full bore ball valve designed for shut-off, on-off functions as well as control application for the metal
CHEMAT. Two-Piece Ball Valves Series CAPRO type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18)
type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18) CHEMAT High quality requirements and technical standards of the chemical industry have been used as basic design parameters for these
BR 26d Ball valve. Stainless Steel. Application: Versions: Special versions:
Application: Stainless Steel BR 26d Ball valve Tight-closing Ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN 15
BUTTERFLY VALVE WITH WELDED ENDS INSTALLATION AND MAINTENANCE MANUAL
BUTTERFLY VALVE 31300 SERIES INSTRUCTIONS FOR INSTALLATION, USE AND MAINTENANCE 1. Overview Read these instructions carefully before starting the valve installation and start-up work. Safe keep the instructions
BALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
NAF-Triball ball valve
NAF-Triball ball valve DN 10-100 for max. 40bar Fk 25.622(12)GB 12.09 Primary characteristics NAF-Triball is a full bore ball valve designed for shut-off, on-off functions as well as control application
TECHNICAL BULLETIN. Valtek ShearStream SB Control Valves. Segmented V-port Ball Valves. Experience In Motion VLEETB
TECHNICAL BULLETIN Valtek ShearStream SB Control Valves Segmented V-port Ball Valves VLEETB4152-03 11.02 Experience In Motion Primary characteristics ShearStream SB is a ball sector valve with metal-to-metal
HIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES
FEATURES AND BENEFITS Wafer & Lugged bodied butterfly valves for bi-directional use Dead end service are offered as standard in full ANSI Class and ratings (for lugged design only) The design of double
INSTALLATION & MAINTENANCE MANUAL SERIES 90SV/93V SEGMENTED V FLOW VALVES
BRIEF INTRODUCTION The Segmented V Flow valve is an advanced quarter-turn control valve which can be used switch on and off and proportionally adjusted. The ball core is designed with a special V type
Concentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
NAF-Setball ball sector valves for MC-pulp DN , PN 16-40, ANSI Class
NAF-Setball ball sector valves for MC-pulp DN 80-300, PN 16-40, ANSI Class 150-300 Fk 41.54(2)GB 11.02 Primary characteristics NAF-Setball for MC-pulp is a ball sector valve with metalto-metal seating
NAF-Torex butterfly valves DN , Size 3-28, PN 10-40, ANSI Class 150, 300
NAF-Torex butterfly valves DN 80-700, Size 3-28, PN 10-40, ANSI Class 150, 300 Fk 41.42(18)GB 11.04 Primary characteristics NAF-Torex, High-Performance butterfly valve is available with either metal-to-metal
Technical specification. Application NAF ProCap is a batch digester capping valve for chips filling in a safe and time saving way. NAF Control Valves
NAF ProCap Capping valve DN00-70, ANSI -0 PN6, ANSI Class 0 Fk.(0)GB 0.7 Primary characteristics NAF ProCap, Capping valve for automated filling of wood chips to the batch digester in Pulp industries.
Series 14b - Type HD
High-Performance Control and Shut-off Butterfly Valve Series 14b - Type HD Application: Tight-closing, double-eccentric butterfl y valve especially for high requirements in the chemical industry, for example
NAF-Setball ball sector valves for MC-pulp DN , PN 16-40, ANSI Class
NAF-Setball ball sector valves for MC-pulp DN 80-300, PN 16-40, ANSI Class 150-300 Fk 41.54(1)GB 08.12 Primary characteristics NAF-Setball for MC-pulp is a ball sector valve with metalto-metal seating
Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel ASTM A351 CF8M. Certificate 3.1
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 mm Flanges R.F. PN40-30 C + 220 C Max Pressure : 40 Bars Specifications : Antistatic device ISO 5211 mounting pad Anti blow-out stem Fully
with electric and pneumatic actuators Control valve straight through with V-port plug DN ARI-STEVI 425 / 426
with electric and pneumatic actuators Control valve straight through with V-port plug DN 300-500 ARI-STEVI 425 / 426 Electric actuator AUMA SAR with LE Electric multiturn actuator capable of high closing
METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW
METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW Neles BW series metal seated high performance butterfly valve with one piece body design, for both control and tight shut-off applications. Multiple
Butterfly valve for marine cargo systems Edition:
Datasheet Butterfly valve for marine cargo systems Edition: 2013-05 Type MTV Type MTVL Wafer design Lugged design Nominal pressure PN 10-25 Class 150 Nominal size DN 80-400 Material Stainless steel Advanced
ARI-FABA -ANSI LongLife Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053
ARI-STEVI 470 / 471 (DN15-150)
With pneumatic and electric actuators ARI-STEVI 470 / 471 (DN15-150) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 Pneumatic
KTM. Enhanced, proven design offers both control and block valve functions
KTM Enhanced, proven design offers both control and block valve functions Features Unique dual-v ball features a secondary (Small) V-notch allowing extremely small, accurate flow rates The primary (Large)
TECHNICAL BULLETIN. NAF Duball DL Ball Valves. Experience in Motion FCD NFENTB A4 12/14
NAF Duball DL Ball Valves FCD NFENTB467-0-A4 /4 TECHNICAL BULLETIN Experience in Motion Primary Characteristics NAF Duball DL is a full-bore ball valve which is equally suitable for isolation, on/off and
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
Materials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 350 mm Between flanges GN 25-20 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to API 607 Iso
NELES TRUNNION MOUNTED BALL VALVE SERIES D
NELES TRUNNION MOUNTED BALL VALVE SERIES D Metso's Neles series D is a trunnion mounted ball valve for demanding on/off and control applications. Valve series incorporates Metso's several decade experience
AKG-A/AKGS-A. Type Series Booklet
Gate Valve AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A All rights reserved. The contents provided herein must neither be distributed,
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
Materials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 flanges - 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO 10497
Knife Gate Valve HERA-SH. PN 10/16, Class 150 DN Uni-directional Full-lug body. Type Series Booklet
Knife Gate Valve HERA-SH PN 10/16, Class 150 DN 50-600 Uni-directional Full-lug body Type Series Booklet Legal information/copyright Type Series Booklet HERA-SH All rights reserved. The contents provided
TECHNICAL BULLETIN. NAF Trunnball DL Ball Valves. Experience in Motion FCD NFENTB A4 09/14
NAF Trunnball DL Ball Valves FCD NFENTB468-00-A4 09/4 TECHNICAL BULLETIN Experience in Motion Primary Characteristics The NAF Trunnball DL is a full-bore trunnion-mounted ball valve, developed by Flowserve
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm ( NPS 2" to 24" ) Between Class 150 (PN20) flanges 29 C + 210 C Max Pressure : 20 Bars Specifications : Double eccentric
with electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 ARI-STEVI 423 Electric actuator ARI-PREMIO
with electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel Additional devices available, e.g.
LCS6822 (Class 150) LCS7822 (Class 300)
Revision 8/22/2012 high performance butterfly valve LCS6822 (Class 150) LCS7822 (Class 300) APPLICATIONS Ideally suited for Commercial, Industrial and Mechanical HVAC Services. Use in other applications
ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T. Electric actuator ARI-PREMIO 5-25 kn ARI-PREMIO-Plus 2G 5-25 kn
ARI-STEVI 423 / 463 (DN200-300) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T. Electric actuator ARI-PREMIO 5-25 kn ARI-PREMIO-Plus 2G 5-25 kn
Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T Reversible pneumatic actuator
Application. 1. Design Features. Pulp and Paper/Waste Water Treatment/ Food and Beverage/Chemical Plants/ Power Plants/ Steel Industry/Etc.
VQF Series V-port Segment Ball Valve (Flange) ISO9001 & CE Accredited Overview The Hiton VQF series v-port segment ball valve is primarily designed for flow control, and it can also be used for shut-off
BUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
Ball Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
BALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
BALL VALVE AL 25-P0. Description. Approvals. Pressure / Temperature. Seat R = PTFE + 25 % glass fiber
Description L25-P0 is a ball valve with flanges. The distance between flanges is according to DIN3202 F4 or F5. The valve has a blow out proof stem and is designed with an antistatic function. The valve
AKG-A/AKGS-A Type Series Booklet
Gate Valve AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A All rights reserved. The contents provided herein must neither be distributed,
PRODUCT EVOLUTION. Be careful, our valves Ref.702 are changing
PRODUCT EVOLUTION Be careful, our valves Ref.702 are changing We currently have 2 different types available (according to DN) with different dimension and non-commutable gaskets Old marking : New marking
BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
butterfly valves high performance TRIPLE OFFSET HP-TRI REV0
high performance EXECUTION 1st OFFSET 2nd OFFSET 3rd OFFSET The BELVEN-TRI series incorporate triple offset disc configuration. With this configuration the disc seal makes contact with body seat, only
BALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0
Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250
with electric and pneumatic actuators Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel
M21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
M21Fi ISO Ball Valve DN15 to DN150
Page 1 of 6 TI-P133-81 ST Issue 1 M21Fi ISO Ball Valve DN15 to DN150 Description The M21Fi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. It is designed to be
BALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
FLANGED REDUCED BORE BALL VALVE, SERIES MBV
FLANGED REDUCED BORE BALL VALVE, SERIES MBV 1 MBV 26 Issue 12/98 DESIGN FEATURES Size range 2" 8". ANSI Class 15 and. Pressure classes Tightness Separate ball and shaft assure low pressure tightness even
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 50 mm Threaded BSP or NPT, S.W. or B.W. -30 C in SS and -20 C in carbon steel + 220 C Max Pressure : 100 to 140 Bars Specifications : Antistatic
516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T. Electric actuator ARI-PREMIO 2,2-25 kn ARI-PREMIO-Plus 2G 2,2-25 kn
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C Max Pressure : 20 Bars Specifications : ISO 5211
HIGH PERFORMANCE BUTTERFLY VALVE
Revised 11/17/2017 HIGH PERFORMANCE BUTTERFLY VALVE LCS-6822 (Class 150) LCS-7822 (Class 300) APPLICATIONS Ideally suited for commercial, industrial, and mechanical HVAC services. Use in other applications
6801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 300, Flanged Ends. Full Port. 2-pc, Split Body. Carbon or Stainless Steel
Features Investment cast 2-piece bolted body construction Blow-out proof stem Reinforced seats Adjustable, live-loaded graphite packing API 598 inspection and testing API 67 5th Edition fire tested Locking
ARI-STEVI 423 / 463 (DN ) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 423 / 463 (DN200-300) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications Features Construction complies with NF EN 1984 Straight-through flow and full port Cast body (investment
Technical Manual. Register 25 CONTENTS - AKH2-TAT
D-88 Ahaus Postfach 112 D-81 Ahaus Telefon: +9(0) 21-8-100 Fax: +9(0) 21-8-200 Register: 2 Page: 1 Date: 0.2008 Contents Register 2 CONTENTS - AKH2-TAT (TAT = Type Acceptance Testing) Page Technical Data
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Carbon steel or stainless steel. Page 1
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C 20 Bars ISO 5211 mounting pad PTFE filled
Materials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 or PN16 flanges 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO
SCP Cylindrical Plug Valves plastomer-lined PM 22 e / Modular Design
DN15 DN100 resp. ½" 6" RP (red. port) SCP Cylindrical Plug Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive, abrasive or even toxic process media in either liquid or gaseous
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T Reversible pneumatic actuator
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Materials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to 100 mm Flanges R.F. PN40-20 C + 220 C Max Pressure : 40 Bars Specifications : ISO 5211 mounting pad PTFE filled with stainless