FULL BORE BALL VALVE of carbon steel with welded ends / flanges and series
|
|
|
- Raymond Hardy
- 5 years ago
- Views:
Transcription
1 FULL BORE BALL VALVE with welded ends / flanges and series C ont R o L Description Edition Ball valves series are a tight on-off valves and suitable for liquid pipe systems. Such as District Heating systems, Heat Transfer piping, oil lines and oxygen-free water lines. The valve has an all-welded body and is fitted with carbon-reinforced Teflon seals which are long-lasting against frequent operation, impurities and chemicals. A ground and polished stainless steel ball gives easy turning and reliable operation over many years. A floating ball construction is used. Bevel spring washers keep the seals pressed against the ball to ensure that the valve remains leak- tight regardless of pressure fluctuations. Nominal dimensions: Nominal pressure Connection Tightness class ISO 5208, EN Working temperature of liquid media Safety 32000TR-N DN TR-N DN TR-N, DN PN 40 bar DN PN 25 bar DN PN 16 bar 32500TR-N, DN PN40 bar, DN PN16 or PN25 bar according to flanges drilling (Available PN 10,16,25,40) 32000TR-N series welded ends, 32500TR-N series flanges: EN RATE A -20 C C - standard -40 C C - option Conform to the requirements of the Council Directive 97/23/EC on Pressure Equipment. Page 1 of 10
2 Exploded view, parts list DN Part number Part 1 Valve body 2 Ball 3 Ball seal 4 Support ring 5 Spring plate 6 Handle 7 Nut 8 Retaining ring 9 Bush 10 O-ring 11 Block stop 12 Distance plate 13 Stem 14 Bush DN Part number Part Qty 1 Valve body 1 2 Ball 1 3 Stem 1 4 Sliding plate 1 5 O-ring 2 6 Sliding bearing 1 7 Top distance plate 1 8 Retaining ring 1 9 Block stop 1 10 Dowel pin 1 11 Retaining ring 1 12 Key 1 13 Handle * 1 14 Retaining ring 2 15 Spring plate 2 16 Support plate 2 17 O-ring 2 18 Ball seal 2 * DN300 without handle Page 2 of 10
3 DN Part number Part Qty 1 Valve body 1 2 Ball 1 3 Stem 1 4 Sliding plate 1 5 O-ring 3 6 Distance plate 2 7 Sliding bearing 2 8 Stem sealing bush 1 9 Retaining ring 1 10 Key 1 11 Spring n* 12 Ball seat 2 *Depends on valve size DN Part number Part Qty 1 Valve body 1 2 Ball 1 3 Operating stem 1 4 Sliding bearing 3 5 Distance plate 2 6 Stem sealing bush 1 7 Retaining ring 1 8 Key 1 9 Socket countersunk head screw 10 O-ring 2 11 O-ring 1 12 Sliding plate 1 13 Key 2 14 Support plate 1 15 Retaining ring 1 16 O-ring n* 17 Bearing stem 1 18 Blind flange 1 19 Hex socket head screw 20 Spring n* 21 Ball seat 2 *Depends on valve size n* n* Page 3 of 10
4 Standard materials DN DN Body Steel P235GH Steel P355 NL1 / GP240GH Ball Stainless steel Steel ASTM A350 LF2 + Ni Stem Stainless steel Stainless steel Stem seals FPM FPM Ball seals PTFE+C PTFE+C Operation DN with galvanized steel handle. We recommend manual gear operation for sizes DN 125 and larger. DN 250 and larger without handle. Valves are available with manual gear, electric actuator or hydraulic actuator. Dimensions TR-N series valve DN PN L D D1 D2 H H1 B Weight kg ,3 42, , ,9 48, , ,7 60, , , , ,3 88, ,3 101, , , , , , ,3 177, , ,7 219, , Page 4 of 10
5 ,1 355, , , , Sizes DN can be operated with handlever. We recommend to use a manual gear from the size DN125 and larger. The opening and closing of valves is stepless. The valve is open when the handlever is in line with pipe. Manual gear DN PN L A D D1 D2 H H1 Weight kg ,3 177, ,7 219, , ,1 355, , , Opening and closing of the valves from the hand wheel. The position of ball can be seen on a position indicator on top of the gear. Page 5 of 10
6 Dimensions TR-N series valve DN L D D3 D4 D5 H B H1 Weight kg PN 40 PN 40 PN 40 PN , , , ,5 DN L D D3 D4 D5 Weight kg H B H1 PN 16 PN 25 PN 16 PN 25 PN 16 PN 25 PN 16 PN ,5 9, , Sizes DN can be operated with handlever. We recommend to use a manual gear from the size DN125 and larger. The opening and closing of valves is stepless. The valve is open when the handlever is in line with pipe. Flanges: EN Face to face dimensions according to: EN558-1 Page 6 of 10
7 Manual gear 32500TR-N D3 D4 D5 Weight kg DN L A D PN16 PN25 PN16 PN25 PN16 PN25 H H1 PN16 PN Opening and closing of the valves from the hand wheel. The position of ball can be seen on a position indicator on top of the gear. Flanges: EN Face to face dimensions according to: EN558-1 Page 7 of 10
8 Pressure (bar) Pressure (MPa) BLUE LINE Pressure / Temperature Rating The max pressure difference depends on the working temperature PN PN PN Temperature of liquid media ( C) If working temperature below -20 C, it must be mentioned in order. Operation torque, Nm DN PN 16 PN 25 PN Page 8 of 10
9 Operation Högfors valves can be equipped with an actuator to your specification. bare shaft (not recommended), manual gear, hand lever, electric actuator, pneumatic or hydraulic actuator. Table of recommended actuators DN Pneumatic actuator RC spring return Manual gear Electric actuator AUMA PN 40 PN 16 PN 40 PN RC210-SR(RC210-DA) SG RC220-SR(RC210-DA) SG RC220-SR(RC210-DA) SG RC230-SR(RC220-DA) SG RC230-SR(RC220-DA) SG RC240-SR(RC230-DA) SG RC240-SR(RC230-DA) SG RC250-SR(RC240-DA) SG RC260-SR(RC250-DA) SG RC270-SR(RC260-DA) SG RC270-SR(RC260-DA) SG RC280-SR(RC270-DA) Q-2000S-W300/20 SA07.6-VZ4.3/GS (RC280-DA) Q-4000S-W600 SA10.2-VZ4.3/GS Q-4000S-W600 SA10.2-VZ4.3/GS Q-6500S-W500/20 SA10.2-VZ4.3/GS Q-12000S-W500/20 SA10.2-GZ160.3/GS Q-12000S-W500/20 SA10.2-GZ160.3/GS Q-24000S-W700/25 SA10.2-GZ200.3/GS Q-32000S-W700/25 SA10.2-GZ250.3/GS Q-50000S-W700/25 SA14.2-GZ250.3/GS250.3 Page 9 of 10
10 How to order TR-N M Body material: Valve type: Connection: Design features: Operation: 3 - Carbon steel 2 - ball valve full bore welded end flanged TR-N ball made of acid proof steel ( _ ) - handlever, ( Z ) - bare shaft, ( M) - manual gear Product codes Ball valve series Handlever Bare shaft Manual gear 32000TR-N 32000TR-N Z 32000TR-N M Page 10 of 10
BALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 05-07-2016 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
BALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 20-02-2015 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
R o L. BALL VALVE of stainless steel with welded / threaded / flanges ends 440, 442, 443, 445 series SILVER LINE. Description. Edition
with welded / threaded / flanges ends C ont R o L Description Ball valve 440-445 series used for on/off services a wide range of applications in the chemical and process industries. It is used for oil,
LONG STEM BALL VALVE of carbon steel with welded ends series
with welded ends 38000 series C ont R o L Description Edition 05-07-2016 Ball valve series 38000 tested according to the EN488 standard and fulfill the requirements of this standard. Tight on-off valve
BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
BUTTERFLY VALVE WAFER TYPE of carbon steel ( ) series
Operation WAFER TYPE of carbon steel 1100 (1000-100) series C ont R o L Operation Edition 0-0-009 Wafer type butterfly valve 1100 (1000 100) series is used in industrial pipelines for demanding on-off
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
BALL SECTOR VALVE of stainless steel 455 (459) series
Operation C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and
Rate B standard. Rate A Rate A option. max +260 C/ min -40 C
of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off
R o L. WAFER PATTERN V-PORT BALL VALVE stainless steel 465 series SILVER LINE. Operation. Description. Edition
Operation WAFER PATTERN V-PORT BALL VALVE stainless steel C ont R o L Description Edition Högfors ball sector valve series 465 is specially designed for control applications of various medium like liquids,
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition
of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off
BALL SECTOR VALVE of stainless steel 455 (459) series
Operation C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and
BALL SECTOR VALVE of stainless steel 455 series
C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and crystallizing
NAVAL Ball Valves NAVALTRIM. Control valve
NAVAL Ball Valves NAVALTRIM Control valve NAVALTRIM CONTROL VALVES NAVALTRIM control valves are designed for control of liquid flows in heating, cooling and air-conditioning systems. NAVALTRIM control
NAF-Triball ball valve
NAF-Triball ball valve DN 10-100 for max. 40bar Fk 25.622(12)GB 12.09 Primary characteristics NAF-Triball is a full bore ball valve designed for shut-off, on-off functions as well as control application
NAF-Trunnball ball valves
NAF-Trunnball ball valves DN 150-800, Size 6-32 PN 10-40, ANSI Class 150-300 Fk 41.66(1)GB 07.12 Primary characteristics NAF-Trunnball is a trunnion ball valve with full-bore. It is designed to give a
NAF-Triball ball valve DN for max. 40bar. Fk (9)GB 03.03
NAF-Triball ball valve - 0 for max. bar Fk.6(9)GB 03.03 Primary characteristics NAF-Triball is a full bore ball valve designed for shut-off, on-off functions as well as control application for the metal
NAVAL. Navaltrim stainless steel control valve
NAVAL Navaltrim stainless steel control valve CONSTRUCTION: NAVALTRIM CONTROL VALVE NAVALTRIM control valves are designed for control of liquid flows in heating, and cooling systems. They are also suitable
BUTTERFLY VALVE WITH WELDED ENDS INSTALLATION AND MAINTENANCE MANUAL
BUTTERFLY VALVE 31300 SERIES INSTRUCTIONS FOR INSTALLATION, USE AND MAINTENANCE 1. Overview Read these instructions carefully before starting the valve installation and start-up work. Safe keep the instructions
For ball valves
Soft seal Ball valve Float ball valve Flange PN16-40 DN15-200 For 1.4408 ball valves Range of application: In industrial facilities, oil and chemical industry and related manufacturing industries Temperature
KNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
TECHNICAL BULLETIN. NAF Duball DL Ball Valves. Experience in Motion FCD NFENTB A4 12/14
NAF Duball DL Ball Valves FCD NFENTB467-0-A4 /4 TECHNICAL BULLETIN Experience in Motion Primary Characteristics NAF Duball DL is a full-bore ball valve which is equally suitable for isolation, on/off and
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+ CARBON STEEL Type: ball valve ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar - 250 Bar
Ball Valves SBV Series full-port
SV: Product Info 23 all Valves, plastomer-lined PM 23 M.00 e December 2006 all Valves SV Series full-port Ideally suited for positive shut-off, flow control and throttling of corrosive, abrasive or even
Ball Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
Features BALL VALVES. Split Wafer. Carbon steel wafer PN ANSI 600 STANDARD FEATURES FEATURES ON REQUEST
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
M21Ti ISO Reduced Bore Ball Valve for the Tobacco Industry DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
HIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES
FEATURES AND BENEFITS Wafer & Lugged bodied butterfly valves for bi-directional use Dead end service are offered as standard in full ANSI Class and ratings (for lugged design only) The design of double
Ball Valves. Data sheet. Description
Ball Valves Description Danfoss JIP ball valves are shut off valves developed for District Heating and District Cooling networks, with circulating medium. It is a range of steel ball valves with fully
2 way ball valve M1 with pneumatic actuator
Praher Plastics Austria GmbH DB/EN/DEEN/14/03/335 Subject to change without prior notice!! General: Valve body: Sealing material: Ball seating joint: Dimensions: PVC-U EPDM / FPM PTFE DN10 DN50 d16 d63
Butterfly valves ARI-ZIVA -Z / ARI-ZIVA -G. with notch lever. with worm gear. with electric rotary actuator rotork
Butterfly valves ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly valve with threaded eyelets
Drain ball valve BR 21a
PTFE - lined Drain ball valve BR 21a Application: Tight-closing PTFE-lined drain ball valve for corrosive media, especially for high process demand in chemical plants: Nominal sizes DN 50 to DN 150 Nominal
M21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Ball Valves JIP (PN 16, 25, 40)
Ball Valves JIP (PN 16, 25, 40) Description Danfoss JIP ball valves are shut off valves developed for District Heating and District Cooling networks, with circulating medium. It is a range of steel ball
Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
Maintenance BR 26d Ball Valve
Maintenance BR 26d Ball Valve Fig. 1 BR 26d Ball valve 0. Contents 1. Introduction 2 2. Design, operation and dimensions 2 3. Installation, start-up and maintenance 2 4. Assembly of the ball valve 2 4.1
NAF-Setball ball sector valves DN , PN 10-40, ANSI Class Fk 41.51(15)GB 03.10
NAF-Setball ball sector valves DN -0, PN 0-, ANSI Class 0-0 Fk 4.()GB 03.0 Primary characteristics NAF-Setball is a ball sector valve with metal-to-metal or metal-to-ptfe seating. The NAF-Setball combines
ISO-DE Double Eccentric Butterfly Valves
ISO-DE Double Eccentric Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 401 South Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 630.844.4000 moreinfo@henrypratt.com
SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
Ball Valve VM Options. General. Modular selection of system components. steel or stainless steel DN PN 100/40 flanges
Ball Valve VM 4460-4466 steel or stainless steel DN 15-200 PN 100/40 flanges General 2-piece ball valve with a unique sealing element design. Modular selection of system components. Supports pressurization
KLINGER Monoball One-Piece ball valves
KLINGER Monoball One-Piece ball valves Edition 02 KLINGER Monoball Fully welded end ball valves High demands Pre-insulated pipeline systems as used e..g. in district heating and waste water networks, are
Fully Welded Ball Valves
Fully Welded Ball Valves Company s Profile Established:..............1956, family owned company Managing Director:.....Dr. Ing. Thomas Böhmer Employees:...............250 Annual turnover:........60 Mill.
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
SERIES 17 3 & 4 WAY BALL VALVE
SERIES & WAY BALL VALVE CARBON STEEL ASTM A WCB STAINLESS STEEL ASTM A CF8M LIVE LOADED STEM PACKING BLOWOUT PROOF STEM AVAILABLE IN T, L, LL & 80 PORT CONFIGURATION LOCKABLE HANDLE ISO MOUNTING PAD SEAT
Sealing Test Pressure (MPa)
TRIPLE ECCENTRIC BUTTERFLY VALVE Triple Eccentric Butterfly Valve provides a tight shut-off. This geometry ensures that the disc seal contacts the body seat only at the final shut-off position without
F low L ine 72/73 Wafer & Lug Style Sizes 2-24
F low L ine 72/73 Wafer & Lug Style Sizes 2-24 Cartridge Seated Butterfly Valves KEY FEATURES Body One piece wafer and lugged body for strength and stability in extreme environments Wafer bodies have a
M21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Butterfly valves. ARI-ZIVA -Z - Fig Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range
ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -Z / ARI-ZIVA -G Butterfly valves ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly
Check Valves DN PN 80, 100, 160
47 DN 300-1000 PN 80, 100, 160 Designed to automatically prevent back flow of working medium, when transmitting non-aggressive natural gas and other non-aggressive media at the temperature ranged -60 C
EXTRACTION CHECK VALVES TYPE C09.6
Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for
Forged 3 Piece Trunnion Mounted Ball Valves Series MS
Forged 3 Piece Trunnion Mounted Ball Valves Series MS Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Metal Seated Chrome carbide and tungsten carbide trims Uni-directional
Neotecha NTB - NTC PFA lined ball valves
These PFA lined ball valves are used in a wide variety of applications in many industries Features General application The valves are ideally suited for corrosive applications, requiring reliable performance,
CHEMAT. Two-Piece Ball Valves Series CAPRO type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18)
type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18) CHEMAT High quality requirements and technical standards of the chemical industry have been used as basic design parameters for these
485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
Modular valve block MVB 100/200
Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution
FULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES 2 PERFORMANCE FROM START TO FINISH Ensuring the safety of the entire pipeline system requires the valves for oil and gas applications to be able to meet the most challenging demands.
PNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
Series 26d Ball Valve
Stainless Steel Series 26d Ball Valve Application Tight-closing ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN
FULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES 2 PERFORMANCE FROM START TO FINISH Ensuring the safety of the entire pipeline system requires the valves for oil and gas applications to be able to meet the most challenging demands.
Fully Welded Ball Valves
Fully Welded Ball Valves Company s Profile Established:... 1956, family owned company Managing Director: Dr. Ing. Thomas Böhmer Employees:... 300 Annual Turnover:... 60 Mill. EUR Production Area:... 269000
Diaphragm valve T4 [hand operated]
![Diaphragm valve T4 [hand operated]](/thumbs/80/82122007.jpg "Diaphragm valve T4 [hand operated]")
Praher Kunststofftechnik GmbH DB/EV/DEEN/4/0/95A Subject to technical modifications! General: Body material: Seals: Diaphragm: Dimensions: Connections: -U, PP, PVDF EPDM, FPM EPDM, EPDM/PTFE DN5 DN5 d0
Fully Welded Ball Valves
Fully Welded Ball Valves API6D & API6D SS COMPANY PROFILE: Established: 1956, Family Owned and Operated Managing Director: Thomas Böhmer PhD Eng. (Dr. Ing.-Germany) Employees: 270 Annual Sales: Facilities:
FULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES 2 PERFORMANCE FROM START TO FINISH Ensuring the safety of the entire pipeline system requires the valves for oil and gas applications to be able to meet the most challenging demands.
BALL VALVE AL 25-P0. Description. Approvals. Pressure / Temperature. Seat R = PTFE + 25 % glass fiber
Description L25-P0 is a ball valve with flanges. The distance between flanges is according to DIN3202 F4 or F5. The valve has a blow out proof stem and is designed with an antistatic function. The valve
M21Fi ISO Ball Valve DN15 to DN150
Page 1 of 6 TI-P133-81 ST Issue 1 M21Fi ISO Ball Valve DN15 to DN150 Description The M21Fi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. It is designed to be
NAF-Setball ball sector valves DN , PN 10-40, ANSI Class
NAF-Setball ball sector valves DN 25-400, PN 10-40, ANSI Class 150-300 Fk 41.51(12)GB 4.98 Replaces Fk 41.51(1GB 12.97 Primary characteristics NAF-Setball is a ball sector valve with metal-to-metal or
NELES HIGH PERFORMANCE TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L12
NELES HIGH PERFORMANCE TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L12 Metso's Neles Neldisc series L12 a wafe type, metal seated high performance triple eccentric disc valve. With close to
Technical Manual. Register 25 CONTENTS - AKH2-TAT
D-88 Ahaus Postfach 112 D-81 Ahaus Telefon: +9(0) 21-8-100 Fax: +9(0) 21-8-200 Register: 2 Page: 1 Date: 0.2008 Contents Register 2 CONTENTS - AKH2-TAT (TAT = Type Acceptance Testing) Page Technical Data
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
Ball Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
TECHNICAL BULLETIN. Valtek ShearStream SB Control Valves. Segmented V-port Ball Valves. Experience In Motion VLEETB
TECHNICAL BULLETIN Valtek ShearStream SB Control Valves Segmented V-port Ball Valves VLEETB4152-03 11.02 Experience In Motion Primary characteristics ShearStream SB is a ball sector valve with metal-to-metal
Nominal diameter: DN Temperature: C Nominal pressure: PN 16 / 25 / 40
Description The valves are ON/OFF valves. Danfoss ball valves have been specially designed f district heating systems and other hot water systems, in which the water has been treated in der to avoid crosion.
SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
CATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.
CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional
SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
TECHNICAL BULLETIN. NAF Trunnball DL Ball Valves. Experience in Motion FCD NFENTB A4 09/14
NAF Trunnball DL Ball Valves FCD NFENTB468-00-A4 09/4 TECHNICAL BULLETIN Experience in Motion Primary Characteristics The NAF Trunnball DL is a full-bore trunnion-mounted ball valve, developed by Flowserve
Technische Dokumentation Technical Documentation
Technische Dokumentation Technical Documentation Fully Lined Sampling Valves XOMOX International GmbH & Co. OHG Dok. Nr.: tdb_sample_gb Von-Behring-Straße 15 D-88131 Lindau / Deutschland Januar 2008 Fully
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
INSTALLATION & MAINTENANCE MANUAL
INSTALLATION & MAINTENANCE MANUAL 3-WAY/4-WAY/5-WAY MULTI-PORT BALL VALVES T TEFLON PARTS - 1. Seat x 5 pcs. 2. Joint Gasket x 5 pcs. 3. Retainer Seal x 5 pcs. 4. Thrust Washer x 1 pc. 5. O-Ring x 1 pc
BFV : 14 : 10 : 12 BUTTERFLY VALVE
BFV : 14 : 10 : 12 BUTTERFLY VALVE Looks Like Conventional Butterfly Valve... 2 FEATURES HIGHER Cv Larger disc for larger flow Improved profile of disc provides minimum Resistance to flow BOTTOM STEM Stem
NAF-Duball ball valves
NAF-Duball ball valves 25-400, Size 1-16 PN 10-40, ANSI Class 150-300 Fk 41.61(22)GB 07.12 Primary characteristics NAF-Duball is a full-bore ball valve which, due to its design and combination of materials,
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH RISING STEM & HANDWHEEL KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR KGV-XD FULLY LUGGED WITH BONNET & HADNWHEEL The XD model knife gate is a Bi-directional
Ball Valves 15i, 17i, 18i, 16 and 26
Ball Valves i, 7i, 8i, and 2 CERTIFIED CE 3 ISO 9 FEATURES Ergonomic design Encapsulated bolting Various seal sets, connections and accessories Standardised VATACO spare parts Easy to fit actuator and
NEOTECHA NTB - NTC PFA LINED BALL VALVES
These PFA lined ball valves are used in a wide variety of applications in many industries FEATURES GENERAL APPLICATION The valves are ideally suited for corrosive applications, requiring reliable performance,
PBV. Threaded and Socketweld Ball Valves P.B.V.
PBV Threaded and Socketweld Ball Valves P.B.V. TABLE OF CONTENTS Overview...3 How to Identify PBV-USA Valves...4 Seat Materials...5 Materials/Parts/Dimensions/Weights Master Star - 5333/6333...6 Superstar
Double Offset Butterfly Valve
General Applications Airport Refuelling Hydrocarbon Processing HVA hemical Processing Purified Gas Steam & Vacuum Services Potable Water Variations of Sealing PTFE - Teflon with glass Metal/Metal Fire
RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
GATE VALVES S 38 APPLICATION
APPLICATION The gate valves of this design are controlled valves used as the shut-off units in the piping system. They can be used for water, saturated and superheated steam, gases, non-aggressive liquids,
BR 26d Ball valve. Stainless Steel. Application: Versions: Special versions:
Application: Stainless Steel BR 26d Ball valve Tight-closing Ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN 15
Gachot Ball Valve Type V16 carbon steel / reduced bore / DN 8 to DN 200
carbon steel / reduced bore / DN 8 to DN 200 Three-piece ball valve featuring a unique design for easy and fast maintenance Features pplications Saturated steam. mmonia, natural gas, propane and utilities.
BUTTERFLY VALVE POWER-PACK CONTROLLED BUTTERFLY VALVE
BEI JI NG JOI NTFLOW SYSTEM CO. BUTTERFLYVALVE Power-pack Controlled Butterfly Valve is a kind of tailor-made products, as it can be different combination with butterfly valve and control system. The basic
PL1 VALVE WITH UM ELECTRIC ACTUATOR
PL1 VALVE WITH UM ELECTRIC ACTUATOR FEATURES The PL1 butterfly-valves are wafer-style valves intended for current valve applications. This PN10 butterfly-valve of reinforced polypropylene is used to isolate
Ball segment valve Edition:
Datasheet Ball segment valve Edition: 2012-07 Type KVTF-C/KVXF-C Flanged design Short face to face Nominal pressure PN 25 / ASME Class 150 Nominal size DN 80-400 / NPS 3-16 Material Stainless steel Control-
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
Evans SN Series. Evans. Sanitary & Vacuum Ball Valves
SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN
WAFER BUTTERFLY VALVES
WAFER BUTTERFLY VALVES Actuator flange accomodate all type of operators; handle, gear, electric and pneumatic actuator Strong precision key gives positive attachment for manual lever or actuator. Shaft
Mounting and Operating Instructions EB 5894 EN. Electric control valves with jet pump. Flanged version of valve with jet pump
Electric control valves with jet pump Type 3267/5824, Type 3267/5825, Type 3267/3374, Type 3267/3274 Pneumatic control valves with jet pump Type 3267-1, Type 3267-7 Flanged version of valve with jet pump
Marwin Valve 4700 Series 2000 WOG Three Piece Ball Valves
4700 Series 2000 WO Three Piece Ball Valves Fire Tested API 607 4 th ed. APPROVEDDD The new Marwin 4700 Series represents the leading technology in three piece ball valves. This versatile 2000 WO rated