GATE VALVES S 38 APPLICATION

Size: px
Start display at page:

Download "GATE VALVES S 38 APPLICATION"

Transcription

1 APPLICATION The gate valves of this design are controlled valves used as the shut-off units in the piping system. They can be used for water, saturated and superheated steam, gases, non-aggressive liquids, crude oil and crude oil products at temperatures -50 C to +550 C (depending on material used). Range of inside diameters is DN 40 to DN 500 for operating pressures PN 16 to PN 100 and for operating parameters according to ČSN (pressure and temperature) or DIN 2401 Section 2.

2 TECHNICAL DESCRIPTION The gate valve is equipped with a yoke and the rising spindle. Connection into the pipeline is flanged or welded-on. The body is made of the casting and the flow is not contracted. The wedge is compact, flexible and guided in the body guide ribs. Sealing seats are screwed into the body or directly welded-on. The seat and wedge sealing surfaces are welded-on. The body is connected to the lid via the flanged joint with asbestos-free seal inserted. The backward spindle sealing is located in the lid beneath the packing space, which is filled up with graphite rings. The spindle nut is imbedded in the yoke lid, in the yoke and the axial ball bearings for bigger inside diameters (from DBN 250). To compensate pressures during control, pipeline heating, etc., the slide valve can be provided with the by-pass. Building lengths correspond to standardised lengths according to ČSN EN 558-1, ISO Flange dimensions correspond to ČSN , DIN 2501 or the customer s demands. The gate valves can be mounted in horizontal, inclined or vertical position. As for gate valves controlled by electric actuator, the position can be restricted if required by the actuator manufacturer. The valve are supplied together with the documentation according to ČSN and EN CONTROL The gate valve is controlled via the hand-wheel or the electric actuator. The hand-wheel rotates to the right when closing. The electric actuator is disconnected from torque in final closed position and from the set-up position in the open position. TABLE OF MATERIALS 1X1 5X 1X1 2X 1X1 2X Pos. from -20 C up to 400 C from -20 C up to 550 C from 50 C up to 400 C ČSN EN ČSN EN ČSN EN 1 Body GP240GH G17CrMo G20Mn5 2 Cover GP240GH G17CrMo G20Mn5 3 Wedge GP240GH G17CrMo G20Mn5 4 Seat P355QH P355NH 5 Stem X12Cr X12Cr X12Cr13 6 Gasket Grafit Grafit Grafit 7 Packing Grafit Grafit Grafit 8 Overlay 13Cr Stellit 18-8CrNi

3 FLANGED DESIGN PN

4 PN PN

5 PN PN

6 WELDING-ON DESIGN PN x x x x x x x x x x x x x8 1090

7 PN x x x x x x x x x x x x x PN x x x x x x x x x x x x x8 1448

8 PN x x x x x x x x x x x x x PN x x x x x x x x x x x x x

9 TYPE DESIGNATION.1 XXX XX / X FLOW DIRECTION ALLOY STEEL GRADE CONNECTION NOMINAL PRESSURE CONTROL MATERIAL FLOW DIRECTION 1 STRAIGHT CONNECTION 1 FLANGED 2 WELDED-ON 8 COMBINED CONTROL 1 HAND-WHEEL 2 GEARBOX + HAND-WHEEL 3 ELECTRIC ACTUATOR 4 PNEUMATIC OR HYDRAULIC ACTUATOR 5 ADJUSTED FOR ACTUATOR CONNECTION MATERIAL 0 STAINLESS STEEL 2 ALLOY STEEL FOR CASTINGS 5 CARBON STEEL FOR CASTINGS ALLOY STEEL GRADE B FOR LOW TEMPERATURES (-50 C TO +400 C) IX FOR HIGH TEMPERATURES (-20 C TO +550 C)

High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C

High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN 63-160, DN 50 150, T max : 550 C Shut-off globe valve (series V30) or shut-off globe valve with control

More information

Gate valve S38 PN , DN , T max : 540 C

Gate valve S38 PN , DN , T max : 540 C Gate valve S38 40-100, DN 40 400, T max : 540 C Shut off gate valve with outsidescrew, rising stem, non-rising hand wheel, with bolted bonnet, with flanges or with butt weld ends, flexible or split wedge,

More information

Type K03. Gate Valve Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / together we are strong

Type K03. Gate Valve Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / together we are strong PN 16 100 Gate Valve Butt-Welded, Flanged Data Sheet Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, 143 00 Praha 4, CZ T: +420 225 371 300, F: +420 225 371 325 E: info@mpowergroup.eu,

More information

High pressure strainer D71.2

High pressure strainer D71.2 High pressure strainer D71.2 PN 63 250, DN 20 50, T max : 600 C High-pressure strainer D71.2 with flanges or butt weld ends,strainer insert made of stainlees steel, with nonasbestos gasket. Meets the requirements

More information

TRIPLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.8

TRIPLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.8 α TRIPLE-ECCENTRIC UTTERFLY VALVES TYPE L32.8 Application Triple-eccentric butterfly valves are industrial valves, which designed to fully open or close the passage of the working medium flowing through

More information

Gate valve S38 PN , DN , T max : 540 C

Gate valve S38 PN , DN , T max : 540 C Gate valve S38 40-100, DN 40 400, T max : 540 C Shut off gate valve with outsidescrew, rising stem, non-rising hand wheel, with bolted bonnet, with flanges or with butt weld ends, flexible or split wedge,

More information

Type K12. Forged Gate Valve with Pressure Sealed Bonnet Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / 2015

Type K12. Forged Gate Valve with Pressure Sealed Bonnet Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / 2015 PN 63 400 Forged Gate Valve with Pressure Sealed Bonnet Butt-Welded, Flanged Data Sheet Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, 143 00 Praha 4, CZ T: +420 225 371 300,

More information

Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN

Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460

More information

Oil safety valve 141 Flame arrester 143 Air release valve for reservoirs 145 Reparation of valves, pumps and other valves 148

Oil safety valve 141 Flame arrester 143 Air release valve for reservoirs 145 Reparation of valves, pumps and other valves 148 PRODUCT CATALOGUE 2 History 4 Products Gate valves Flat 13 Oval 25 Round 41 Knife 53 Butterfly valves Double eccentric 63 Triple eccentric 81 Turbine inlet valves 85 Non-return valve Swing check valves

More information

Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide

Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications

More information

COMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:

COMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries: UTTERFLY VALVES TALE OF CONTENT COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual

More information

Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50

Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50 Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60

More information

STEAM EXTRACTION / COLD REHEAD ACTUATED CHECK VALVES

STEAM EXTRACTION / COLD REHEAD ACTUATED CHECK VALVES STEAM EXTRACTION / COLD REHEAD ACTUATED CHECK VALVES More than 20 years of experience in design and manufacturing and service of custom made actuated Steamextraction Check valves for the Power Generation

More information

technical description:

technical description: The gate valves are used as the closing valves for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products Operating parameters are in accordance with the standard ASME

More information

EXTRACTION CHECK VALVES TYPE C09.6

EXTRACTION CHECK VALVES TYPE C09.6 Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for

More information

BALL VALVE DOUBLE BLOCK & BLEED design RSD BB type TRUNNION MOUNTED, ANTISTATIC,FIRE SAFE DESIGN API607,API6FA

BALL VALVE DOUBLE BLOCK & BLEED design RSD BB type TRUNNION MOUNTED, ANTISTATIC,FIRE SAFE DESIGN API607,API6FA BALL VALVE DOUBLE BLOCK & BLEED design RSD BB type TRUNNION MOUNTED, ANTISTATIC,FIRE SAFE DESIGN API607,API6FA APPLICATIONS Designed and executed for use in pipeline systems, which convey fluids under

More information

MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of

MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing

More information

NORI 320 Globe valves PN DN Application Standard variants Operating data Materials Remarks Design

NORI 320 Globe valves PN DN Application Standard variants Operating data Materials Remarks Design Type series booklet 7653.1/8-10 NORI 320 Globe valves with gland packing with non-turning stem flanged or butt-weld ends ZXLF ZXSF PN 250-320 DN 65-200 Application In industrial plants, power stations,

More information

PF6 Stainless Steel Piston Actuated On/ Off Valves

PF6 Stainless Steel Piston Actuated On/ Off Valves Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil

More information

British Standard institute-bs Valve Standards

British Standard institute-bs Valve Standards BS 341-1:1991 Transportable gas container valves. Specification for industrial valves for working pressures up to and including 300 bar (REPLACED by BS EN 14189:2003), BS 341-3:2002), BS EN 849:1997),

More information

SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D

SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98

More information

VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS

VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of

More information

PF6 Stainless Steel Piston Actuated On/Off Valves

PF6 Stainless Steel Piston Actuated On/Off Valves Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

The GACHOT V501 gate valve offer the most possible reliability for process and critical applications

The GACHOT V501 gate valve offer the most possible reliability for process and critical applications The GACHOT V501 gate valve offer the most possible reliability for process and critical applications Features Construction complies with NF EN 1984 Straight-through flow and full port Cast body (investment

More information

RAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.

RAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Fig. 6022-6025 RAIMONDI High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Features Forged body materials of highest quality, all in compliance with ASME

More information

OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS

OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION

More information

The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam

The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products The Characteristics of working conditions: pressure dependency on

More information

BUTTERFLY VALVE WAFER TYPE of carbon steel ( ) series

BUTTERFLY VALVE WAFER TYPE of carbon steel ( ) series Operation WAFER TYPE of carbon steel 1100 (1000-100) series C ont R o L Operation Edition 0-0-009 Wafer type butterfly valve 1100 (1000 100) series is used in industrial pipelines for demanding on-off

More information

ITEM DESCRIPTION FIGURE STOP VALVES

ITEM DESCRIPTION FIGURE STOP VALVES INDEX OF STEEL INDUSTRIAL VALVES ITEM DESCRIPTION FIGURE STOP VALVES 01. STRAIGHT PATTERN STOP VALVES PN 40 DN 15-250 for general application ZPZ 1 with control disc for general application ZPR 1 for petroleum

More information

Pressure reducing valve Pressure reducing valve in straightway form DN

Pressure reducing valve Pressure reducing valve in straightway form DN Pressure reducing valve Pressure reducing valve in straightway form DN 15-150 ARI-PREDU Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Grey cast

More information

Si Engineering GREAT Solutions. Steam Safety Valves to PED and DIN/EN standards

Si Engineering GREAT Solutions. Steam Safety Valves to PED and DIN/EN standards Engineering GREAT Solutions Steam Safety Valves to PED and DIN/EN standards Engineered specific for HP steam application Features The IMI Bopp & Reuther high pressure steam safety valve: > Solid inlet

More information

ARI-ZETRIX Process valve (gear-operated / actuated)

ARI-ZETRIX Process valve (gear-operated / actuated) - Fig. 016 - Double flanged process valve with metallic sealing - Triple offset Process valve (gear-operated / actuated) with worm gear Self-locking With variable adjustment Page 4 Fig. 016 - gear with

More information

Si 6303 / Si 6304 / Si 6305

Si 6303 / Si 6304 / Si 6305 Si 6303 / Si 6304 / Si 6305 Engineering GREAT Solutions Process and steam safety valves to PED and DIN/EN standards Si 6303 / Si 6304 / Si 6305 Si 6303 / Si 6304 / Si 6305 Features Engineered for high

More information

Maintenance-free shut-off valves PN 25/40 DN

Maintenance-free shut-off valves PN 25/40 DN Type series booklet 7160.1/7-10 NORI 40 Maintenance-free shut-off valves with bellows flanged or with butt weld ends Type ZYLB Type ZYSB PN 25/40 DN 15-300 Fields of Application In heat transfer plants,

More information

Soft sealing gate valves F4-F5 PN16. TYPE 02400/BV Soft sealing gate valve F4-F5 PN16

Soft sealing gate valves F4-F5 PN16. TYPE 02400/BV Soft sealing gate valve F4-F5 PN16 SLES SERVICE +8 (0)7 6 info@econosto.fi TYPE 000 DN0-0 TYPE 000 DN0-00 Soft sealing gate valves Nominal diameter options (DN) 0-00 Nominal pressure options (PN) 6 TYPE 000/BV-0-7 Soft sealing gate valve

More information

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric

More information

Cast Iron Valves. Product Information. It s all at Albion

Cast Iron Valves. Product Information. It s all at Albion Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS

More information

Excess pressure regulator Excess pressure regulator, straight through DN

Excess pressure regulator Excess pressure regulator, straight through DN ARI-PREDEX Excess pressure regulator Excess pressure regulator, straight through DN 15-150 ARI-PREDEX Excess pressure regulator, straight through with diaphragm actuator UDA Actuator with rolling diaphragm

More information

Maintenance-free metallic seat shut-off globe valves

Maintenance-free metallic seat shut-off globe valves Type leaflet 7150.1/5-10 BOA R -H Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16

More information

DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7

DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7 Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on

More information

Self-operated Pressure Regulators Type Universal Excess Pressure Valve

Self-operated Pressure Regulators Type Universal Excess Pressure Valve Self-operated Pressure Regulators Type 41-73 Universal Excess Pressure Valve Application Pressure regulators for set points from 0.05 to 8 bar Valve nominal sizes DN 15 to 100 Nominal pressure PN 16 to

More information

VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1

VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1 SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators

More information

COMPANY PROFILE. Our products have been supplied to local and foreign customers for the following industries:

COMPANY PROFILE. Our products have been supplied to local and foreign customers for the following industries: CECK VAVES COMPANY PROFIE The company ARMATURY Group a.s. is a leaing Czech manufacturer an istributor of inustrial valves, fittings an control systems for valves. The annual prouction is of more than

More information

Globe valves PN 25/40 DN

Globe valves PN 25/40 DN Type series booklet 7622.1/9-10 NORI 40 Globe valves with gland packing with non-rotating stem flanged or with butt or socket weld ends ZXLF ZXSF PN 25/40 DN 10- Application In industrial plants, building

More information

FASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN

FASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves

More information

with pneumatic actuator Pneumatic process valve, Y-pattern DN ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets

with pneumatic actuator Pneumatic process valve, Y-pattern DN ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets with pneumatic actuator Pneumatic process valve, Y-pattern DN 15-50 ARI-STEVI AS 350 - with screwed sockets Piston actuator Required air supply pressure, max. 10 bar Operating pressure, max. 16 bar Page

More information

BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series

BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off

More information

R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition

R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off

More information

BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm

BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB

More information

CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA

CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400

More information

Triple Eccentric Control and Shut-off Butterfly Valve Series 14t

Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Application: Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Triple eccentric butterfly valve providing excellent shut-off in all industrial applications: Nominal size DN 80 to DN 400

More information

Bolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series

Bolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series Cast Steel Bolted Bonnet Valves (BL Series) Gate Valve - BL5 Series Gate Valve Features Globe Valve - BL6 Series Globe Valve Features Swing Check Valve - BL7 Series Optional Features Model Numbers GATE

More information

Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper

More information

GA-1601B (EN) GATE VALVE

GA-1601B (EN) GATE VALVE GA101B (EN) GATE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and

More information

IBV Series C-LF2 Carbon Steel Inverted Bucket Vertical Steam Trap

IBV Series C-LF2 Carbon Steel Inverted Bucket Vertical Steam Trap Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

KNIFE GATE VALVES -- MODEL D

KNIFE GATE VALVES -- MODEL D PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE 11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off

More information

HELYON PRESSURE REDUCING VALVE MODEL M1

HELYON PRESSURE REDUCING VALVE MODEL M1 PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,

More information

Maintenance-free metallic seat shut-off globe valves

Maintenance-free metallic seat shut-off globe valves Type leaflet 7150.1-10 BOA-H R Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN

More information

technical description:

technical description: The steel flanged and welded swing check valves are the pipeline valves, preventing automatically a working medium from the back flow. They are used for: - noncorrosive fluids - water - steam - oil - petroleum

More information

H i g h P r e s s u r e V a l v e

H i g h P r e s s u r e V a l v e High Pressure Valve HIGH PRESSURE VALVES Applications & Specifications Range Gate Valve Advantages STRACK has designed and manufactured high pressure valves for over 35 years. Currently more than 3000

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use

More information

DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7

DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7 DOULE-ECCENTRIC UTTERFLY VALVES TYPE L32.7 Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through

More information

AKG-A/AKGS-A Type Series Booklet

AKG-A/AKGS-A Type Series Booklet Gate Valve AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A All rights reserved. The contents provided herein must neither be distributed,

More information

ARI-FABA -ANSI LongLife Stop valve with bellows seal

ARI-FABA -ANSI LongLife Stop valve with bellows seal Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut

More information

PN63 - PN160. with electric and pneumatic actuators. Control valve in straightway form with flanges and butt weld ends (shoed ends) DN

PN63 - PN160. with electric and pneumatic actuators. Control valve in straightway form with flanges and butt weld ends (shoed ends) DN with electric and pneumatic actuators Control valve in straightway form with flanges and butt weld ends (shoed ends) DN 15-100 PN63 - PN160 ARI-STEVI 472 Electric actuator ARI-PREMIO Enclosure IP 65 2

More information

AKG-A/AKGS-A. Type Series Booklet

AKG-A/AKGS-A. Type Series Booklet Gate Valve AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A All rights reserved. The contents provided herein must neither be distributed,

More information

Single Seated Globe Control Valves

Single Seated Globe Control Valves Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:

More information

Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²

Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm² WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off

More information

ECOLINE GTC Type Series Booklet

ECOLINE GTC Type Series Booklet Gate Valve ECOLINE GTC 150-600 Class 150-600 NPS 2''-36'' Cast Steel / Stainless Steel Bolted Bonnet Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet ECOLINE GTC 150-600

More information

PN63 - PN160. ARI-STOBU PN Stuffing box valve. Stop valve with gland seal - metallic sealing. ARI-STOBU - Straight through with flanges

PN63 - PN160. ARI-STOBU PN Stuffing box valve. Stop valve with gland seal - metallic sealing. ARI-STOBU - Straight through with flanges Stuffing box valve Stop valve with gland seal - metallic sealing ARI-STOBU - Straight through with flanges PN63 - PN160 Forged steel High temperature steel Fig. 006 Seite 2 ARI-STOBU - Straight through

More information

Sempell High Pressure Stop Valves Model VA510 (DIN)

Sempell High Pressure Stop Valves Model VA510 (DIN) Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with

More information

BUTTERFLY VALVE TRIPLE ECCENTRIC BUTTERFLY VALVE

BUTTERFLY VALVE TRIPLE ECCENTRIC BUTTERFLY VALVE Triple Eccentric Butterfly Valve provides a tight shut-off performance. This geometry ensures that the disc seal contacts the body seat only at the final shut-off position without rubbing or galling, providing

More information

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016)

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016) General Description The model FKB VGU-01 is developed in accordance with MSS-SP 81 Standard and its function is blocking the fluid sewage. They are light equipments for semi-lug body and flange installation,

More information

AKG-A/AKGS-A. Type Series Booklet

AKG-A/AKGS-A. Type Series Booklet AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Pressure seal bonnet Flanged/Butt Weld Ends Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A KSB Aktiengesellschaft Pegnitz All rights

More information

VAD Variable Area Desuperheaters

VAD Variable Area Desuperheaters Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

SEMPELL. All applications of stop valves up to a Nominal Diameter of 50 mm. VA 500 Serie high-pressure Stop Valves DIN

SEMPELL. All applications of stop valves up to a Nominal Diameter of 50 mm. VA 500 Serie high-pressure Stop Valves DIN DIN SEMPELL All applications of stop valves up to a Nominal Diameter of 50 mm. Features Bonnetless die-forged body. One piece body design with packing only. Stellited seat. Stem nut drive sealed against

More information

STAAL 100 Swing check valves PN DN Applications Standard Variants Operating Data Materials Additional Information Purchase Order Data

STAAL 100 Swing check valves PN DN Applications Standard Variants Operating Data Materials Additional Information Purchase Order Data Type series booklet 7371.1/10-10 STAAL 100 Swing check valves with bolted cover flanged or with butt weld ends AKK AKKS PN 63-100 DN 80-400 Applications In industrial plants, power stations, process and

More information

STAAL 40 AKD/AKDS Type Series Booklet

STAAL 40 AKD/AKDS Type Series Booklet Gate Valve STAAL 40 AKD/AKDS PN 10-40 DN 50-600 Type Series Booklet Legal information/copyright Type Series Booklet STAAL 40 AKD/AKDS All rights reserved. The contents provided herein must neither be distributed,

More information

BALL VALVE of carbon steel with welded ends / threaded ends / flanges series

BALL VALVE of carbon steel with welded ends / threaded ends / flanges series with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 05-07-2016 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.

More information

Typical Feed Water Heater Isolation System.

Typical Feed Water Heater Isolation System. Type AVS 4/5 Typical Feed Water Heater Isolation System. Features and Benefits These valves are designed to bypass high pressure feedwater around a group of heaters in the event of high water level in

More information

LONG STEM BALL VALVE of carbon steel with welded ends series

LONG STEM BALL VALVE of carbon steel with welded ends series with welded ends 38000 series C ont R o L Description Edition 05-07-2016 Ball valve series 38000 tested according to the EN488 standard and fulfill the requirements of this standard. Tight on-off valve

More information

BALL VALVE of carbon steel with welded ends / threaded ends / flanges series

BALL VALVE of carbon steel with welded ends / threaded ends / flanges series with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 20-02-2015 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.

More information

KNIFE GATE VALVES -- MODEL A

KNIFE GATE VALVES -- MODEL A PRODUCT DESCRIPTION Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. Several seat

More information

PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3

PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve

More information

Self-operated Pressure Regulators Type Universal Excess Pressure Valve

Self-operated Pressure Regulators Type Universal Excess Pressure Valve Self-operated Pressure Regulators Type 41-73 Universal Excess Pressure Valve ANSI version Application Pressure regulator for set points from 0.75 to 400 psi (0.05 to 28 bar) Valves in NPS ½ to 4 (DN 15

More information

R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description

R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control

More information

Ball Valve VM Options. General. Modular selection of system components. steel or stainless steel DN PN 100/40 flanges

Ball Valve VM Options. General. Modular selection of system components. steel or stainless steel DN PN 100/40 flanges Ball Valve VM 4460-4466 steel or stainless steel DN 15-200 PN 100/40 flanges General 2-piece ball valve with a unique sealing element design. Modular selection of system components. Supports pressurization

More information

Maintenance-free metal-seated globe valves. Grey cast iron PN 16 DN Nodular cast iron PN 16 DN Nodular cast iron PN 25 DN

Maintenance-free metal-seated globe valves. Grey cast iron PN 16 DN Nodular cast iron PN 16 DN Nodular cast iron PN 25 DN Type Series Booklet 7150.1/9-10 BOA -H Maintenance-free metal-seated globe valves with bellows Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN 15-350 Nodular cast iron PN 25 DN 15-150 Applications

More information

HEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10

HEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10 HEAVY DUTY KNIFE GATE VALVE The SERIES knife gate is a uni-directional lug type valve designed according to the MSS-SP-1 and TAPPI TIS 405- standard for industrial service applications. The design of the

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging

More information

Data Sheet T EN

Data Sheet T EN Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN

More information

Maintenance-free shut-off globe valves PN 25/40 DN Standard variants. Application. Operating data. Remarks. Materials

Maintenance-free shut-off globe valves PN 25/40 DN Standard variants. Application. Operating data. Remarks. Materials Type series booklet 7161.1/17-10 BOA -H/HE Maintenance-free shut-off globe valves with bellows BOA-H BOA-HE Our bellows globe valves meet the stringent requirements of the German Clean Air Act flanged

More information

Series 240 Pneumatic On-off Valve Type 3351

Series 240 Pneumatic On-off Valve Type 3351 Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal

More information

Self-operated Pressure Regulators Type Universal Pressure Reducing Valve

Self-operated Pressure Regulators Type Universal Pressure Reducing Valve Self-operated Pressure Regulators Type 41-23 Universal Pressure Reducing Valve ANSI version Application Pressure regulators for set points from 0.75 to 400 psi (0.05 to 28 bar) Valves in NPS ½ to 4 (DN

More information

Fig. BGV116,BGV216,BGV225 & BGV340

Fig. BGV116,BGV216,BGV225 & BGV340 DN 15-200 Cast Iron,Nodular Cast Iron & Carbon Steel DN 15-200 PN16,PN25 & (PN40 Carbon Steel) Fig. BGV116,BGV216,BGV225 & BGV340 Page 1 / 9 General description General Description ICPrange of bellows

More information

High Flow Safety Valves

High Flow Safety Valves High Flow Safety Valves Engineering GREAT Solutions Process and steam safety valves to PED and DIN/EN standards High Flow Safety Valves Valve summary Si 6301 Size DN 20 to DN 150 Set Pressure up to16 bar

More information

Gate valve, billet-forged. p approx. 600 bar DN Applications

Gate valve, billet-forged. p approx. 600 bar DN Applications Type series booklet 7451.1/11-10 ZTS Gate valve, billet-forged with pressure seal bonnet with butt weld ends p approx. 600 bar DN 50-800 Applications In industrial plants, power stations, process and marine

More information