Features BALL VALVES. Split Wafer. Carbon steel wafer PN ANSI 600 STANDARD FEATURES FEATURES ON REQUEST
|
|
- Logan Nicholson
- 5 years ago
- Views:
Transcription
1 OMAL S.p.a. Via Ponte Nuovo, Rodengo Saiano (BS) ITALY Phone Fax Booked in the Enterprise Register of: Brescia number Share capital completely deposited: ,00 Split Wafer BALL VALVES Carbon steel wafer PN ANSI 600 featu res featu res & benefits d iag rams d imensions and materials shaft extension d rives Features STANDARD FEATURES No protuding floating ball, full bore Soft-seat seal: DEVLON Standard for connecting flanges: EN ed. 2008; ANSI B16.5 Operating temperature see temperature pressure diagram Pressure class: PN ; ANSI 600 Intercepted fluid: air, water, gas, petroleum and petrochemical products. Antistatic device EN Stem seal: TFM 1600 V-pack Additional seal on stem with FKM O-ring Anti Blow-out stem Actuator connection as per standard ISO 5211 Closing angle >7 Superficial treatment: blueing FEATURES ON REQUEST LF2 carbon steel for low temperature execution (-40 C ) For other flange types please contact our sales department. Sealing in: PTFE reinforced with glass (RPTFE-GF), PTFE reinforced with carbon-graphite (RPTFE-CF). For other types of materials please contact our sales department Mono-directional version with pressure-relief hole in the ball Stainless steel lever For special versions in materials different from the standard (body, ball, stem), please contact our sales department. Stainless steel Stem nuts and springs Superficial treatment: white zinc coating,epoxy coating For other coating please contact our sales department ATEX marking and certificateon REQUEST Be environmentally friendly...please don't print this document unless you really need to. 1 / 20
2 CERTIFICATIONS In compliance with European Directive 97/23 EC PED; Fugitive Emisson ISO (ISO FE BH-C03-SSA 0); TA-LUFT VDI 2440; FIRE SAFE: ISO / API 607 Safety integrity level up SIL3 according to the IEC In compliance with ATEX EU Directive, ATEX certificate ON REQUEST. ENGINEERING STANDARDS Body thickness in compliance with: ASME B16.34, ASME VIII div.1, EN Materials and rating in compliance with ASME B16.34 for ANSI valves and EN for PN valves Be environmentally friendly...please don't print this document unless you really need to. 2 / 20
3 Features & benefits 1 Antistatic device (electrical continuity between ball, stem and body) Static electricity is avoided which can cause sparks and fire in an inflammable/explosive environment Contact safety throughout the entire life of the valve 2 Double antifriction washer Less Break Away Torque is granted Less wear comparing with the execution with the single washer 3 "V" seals pack; 3 seals + o-ring It ensures a perfect tightness even after a high number of cycles 4 Spring washer on the shaft seal 5 Stretch Graphite seal Greater precision in the alignment of axes due to a unique positioning in the process machining from raw material to finished valve Valves in carbon steel made with certified material - NACE as standard 100% in-house manufacturing process technology "Fire safe" Certificate ATEX Certificate TA LUFT fugitive emission Certificate PED Certificate Guarantee of the recovery of the gap due to the wear caused by the rotational movement of the shaft avoiding leakage towards the outside part. Allow to maintain energized the "chevron" seals (V), thus avoiding any leakage to the outside, against huge temperature excursions Tightness towards outside is granted, independently by the thermal excursions to which the valve is subjected Longer lifetime of the valve Less break away torque Greater corrosion resistance Greater ductility of the material Maximum control and accuracy in all the stages of the manufacturing process Flexibility in supply quickly special executions requested by customers Guarantees the tightness of the valve also in case of fire Installation is possible in a potential explosive environment High level of safety of the tightness towards the outside is granted Full compliance with European Safety Standards for Pressure Equipment Be environmentally friendly...please don't print this document unless you really need to. 3 / 20
4 Diagrams Temperature/pressure diagram for carbon steel valve Be environmentally friendly...please don't print this document unless you really need to. 4 / 20
5 Dimensions and materials DIMENSIONS TABLE SIZE E L B C ATT.ISO M N F/T H Y DN F04 42 M5 12/ DN F04 42 M5 12/ DN F05 50 M6 16/ DN F05 50 M6 16/ DN F07 70 M DN F07 70 M DN F M DN F M DN F M Be environmentally friendly...please don't print this document unless you really need to. 5 / 20
6 DIMENSIONS TABLE Size PN/ANSI A G R S H HOLES N I P Kg L DN 15 PN M DN 15 ANSI /2 UNC DN 20 PN M DN 20 ANSI /8 UNC DN 25 PN M DN 25 ANSI /8 UNC DN 32 PN M DN 32 ANSI /8 UNC DN 40 PN M DN 40 ANSI /4 UNC DN 50 PN M DN 50 PN M DN 50 ANSI /8 UNC DN 65 PN M ,5 140 DN 65 PN M DN 65 ANSI /4 UNC DN 80 PN M DN 80 PN M DN 80 ANSI /4 UNC DN 100 PN M DN 100 PN M Be environmentally friendly...please don't print this document unless you really need to. 6 / 20
7 DN 100 ANSI /8 UNC MATERIALS TABLE N Description A105 Carbon steel body LF2 Carbon steel body 1 Body 2 Ring nut 3 Ball ASTM A105 ASTM A351 CF8(*) (1.4308/Gx5CrNi19-10) (**) ASTM A350 LF2 ASTM A351 CF8(*) (1.4308/Gx5CrNi19-10) (**) 4 Stem A564 TP.630 (17-4PH) A564 TP.630 (17-4PH) 5 Seat DEVLON DEVLON 7 Stem lower sealing TFM1600 (.) TFM1600 (.) 8 Chevron rings TFM1600 (.) TFM1600 (.) 6 Body-ring nut gasket GRAFOIL GRAFOIL 9 Stem o-ring FKM (.) FKM (.) 10 Packing gland ring Carbon steel galvanized (x) (1) Carbon steel galvanized (x) (1) 11 Stop nut plate 304 S.S. 304 S.S. 12 Stem nut UNI S Galvanized (xx) UNI S Galvanized (xx) 13 Springs washer 50CrV4 Galvanized (xx) 50CrV4 Galvanized (xx) 14 Antistatic device 316 S.S. 316 S.S. 19 Body-ring nut screw A2-70 UNI 3740 (304 S.S.) A2.70 UNI 3740 (304 S.S:) 15 Lock nut UNI S Galvanized (x) UNI S Galvanized (x) 16 Holder screw A2-70 UNI 3740 (304 S.S.) A2-70 UNI 3740 (304 S.S.) 17 Holder screw Carbon steel galvanized (x) Carbon steel galvanized (x) 18 Lever Fe37 Galvanized (x) Fe37 Galvanized (x) Available on request: (*): A351 CF8M (**): for DN32 available only in CF8M (x): 304 s.s. Be environmentally friendly...please don't print this document unless you really need to. 7 / 20
8 (xx): 301 s.s. for DN32 available only in DEVLON (1) for DN 100 available only in 304 (.): Other materials available on request Be environmentally friendly...please don't print this document unless you really need to. 8 / 20
9 Shaft extension WELDED SPINDLE EXTENSION WITH LEVER MATERIALS TABLE PART. N DESCRIPTION MATERIALS 1 Extension AISI304 S.S. 2 Pin AISI 430 F 3 Bush DELRIN 4 O-RING NBR Be environmentally friendly...please don't print this document unless you really need to. 9 / 20
10 5 Lever Fe 37 galvanized (*) 6 Nut galvanized carbon steel (*) 7 Holder Lever galvanized carbon steel (*) 8 Holder screw A Lever nut A2 (**) (*): On request available in Aisi 304 s.s. (**): No available on valves with Iso connection F04 DIMENSIONS TABLE ISO A B C M N F/T Y F ,5 36 5,5 10/6 140 F ,5 42 M5 12/8 150 F ,5 50 6,5 16/ F / F / NOTE: Code of the spindle extension depending from drive s type and valve s connection; to be requested at the order SPINDLE EXTENSION FOR ACTUATORS Be environmentally friendly...please don't print this document unless you really need to. 10 / 20
11 NOTE: Dimensions depending from valve s connection NOTE: Dimensions depending from actuator s size MATERIALS TABLE PART. N DESCRIPTION MATERIALS 1 Prolunga Extension 304 S.S. 2 Perno Pin AISI 430 F 3 Bussola Bush DELRIN Be environmentally friendly...please don't print this document unless you really need to. 11 / 20
12 4 O-RING O-RING NBR NOTE: Code of the spindle extension depending from drive s type and valve s connection; to be requested at the order Be environmentally friendly...please don't print this document unless you really need to. 12 / 20
13 Drives - Bare shaft and lever CARBON STEEL BARE SHAFT (V ) AND LEVER (L ) OPERATED VALVE CODE size PN/ANSI A105 Carbon steel LF2 Carbon steel DN 15 PN V/LM404N00CAA0AAMRV00B V/LM404N00CBA0AAMRV00B DN 15 ANSI 600 V/LM404401CAA0AAMRV00B V/LM404401CBA0AAMRV00B DN 20 PN V/LM405N00CAA0AAMRV00B V/LM405N00CBA0AAMRV00B DN 20 ANSI 600 V/LM405401CAA0AAMRV00B V/LM405401CBA0AAMRV00B DN 25 PN V/LM406N00CAA0AAMRV00B V/LM406N00CBA0AAMRV00B DN 25 ANSI 600 V/LM406401CAA0AAMRV00B V/LM406401CBA0AAMRV00B DN 32 PN V/LM407N00CAA0AAMRV00B V/LM407N00CBA0AAMRV00B DN 32 ANSI 600 V/LM407401CAA0AAMRV00B V/LM407401CBA0AAMRV00B DN 40 PN V/LM408N00CAB0AAMNV00B V/LM408N00CBB0AAMNV00B DN 40 ANSI 600 V/LM408401CAB0AAMNV00B V/LM408401CBB0AAMNV00B DN 50 PN 63 V/LM409K00CAB0AAMNV00B V/LM409K00CBB0AAMNV00B DN 50 PN 100 V/LM409L00CAB0AAMNV00B V/LM409L00CBB0AAMNV00B DN 50 ANSI 600 V/LM409401CAB0AAMNV00B V/LM409401CBB0AAMNV00B DN 65 PN 63 V/LM410K00CAB0AAMNV00B V/LM410K00CBB0AAMNV00B DN 65 PN 100 V/LM410L00CAB0AAMNV00B V/LM410L00CBB0AAMNV00B DN 65 ANSI 600 V/LM410401CAB0AAMNV00B V/LM410401CBB0AAMNV00B DN 80 PN 63 V/LM411K00CAB0AAMNV00B V/LM411K00CBB0AAMNV00B DN 80 PN 100 V/LM411L00CAB0AAMNV00B V/LM411L00CBB0AAMNV00B DN 80 ANSI 600 V/LM411401CAB0AAMNV00B V/LM411401CBB0AAMNV00B DN 100 PN 63 V/LM412K00CAB0AAMNV00B V/LM412K00CBB0AAMNV00B DN 100 PN 100 V/LM412L00CAB0AAMNV00B V/LM412L00CBB0AAMNV00B DN 100 ANSI 600 V/LM412401CAB0AAMNV00B V/LM412401CBB0AAMNV00B Be environmentally friendly...please don't print this document unless you really need to. 13 / 20
14 Drives - Double acting pneumatic actuator Item codes in A105 CARBON Steel A105 Carbon steel Actuator Connecting kit Size PN N H Kg DM404N00CAA0AAMRV00BAACA0 DA030401S KCF DN 15 PN ,4 5,2 DM405N00CAA0AAMRV00BAADA0 DA045402S KCF DN 20 PN ,2 8 DM406N00CAA0AAMRV00BAAEA0 DA060402S KCF DN 25 PN ,4 8,5 DM407N00CAA0AAMRV00BAAFA0 DA090401S KCF DN 32 PN ,5 11,9 DM408N00CAB0AAMNV00BAAHA0 DA120401S KCF DN 40 PN ,4 16,4 DM409K00CAB0AAMNV00BAAIA0 DA180401S KCF DN 50 PN ,3 DM409L00CAB0AAMNV00BAAIA0 DA180401S KCF DN 50 PN ,3 DM410K00CAB0AAMNV00BAAJA0 DA240401S KCF DN 65 PN ,4 34,8 DM410L00CAB0AAMNV00BAAJA0 DA240401S KCF DN 65 PN ,4 38,5 DM411K00CAB0AAMNV00BAAKA0 DA360401S KCF DN 80 PN ,5 42 DM411L00CAB0AAMNV00BAAKA0 DA360401S KCF DN 80 PN ,5 47,5 DM412K00CAB0AAMNV00BAAMA0 DA720401S KCF DN 100 PN , ,5 DM412L00CAB0AAMNV00BAAMA0 DA720401S KCF DN 100 PN , Item codes in LF2 CARBON Steel LF2 Carbon steel Actuator Connecting kit Size PN N H Kg DM404N00CBA0AAMRV00BAACA0 DA030401S KCF DN 15 PN ,4 5,2 Be environmentally friendly...please don't print this document unless you really need to. 14 / 20
15 DM405N00CBA0AAMRV00BAADA0 DA045402S KCF DN 20 PN ,2 8 DM406N00CBA0AAMRV00BAAEA0 DA060402S KCF DN 25 PN ,4 8,5 DM407N00CBA0AAMRV00BAAFA0 DA090401S KCF DN 32 PN ,5 11,9 DM408N00CBB0AAMNV00BAAHA0 DA120401S KCF DN 40 PN ,4 16,4 DM409K00CBB0AAMNV00BAAIA0 DA180401S KCF DN 50 PN ,3 DM409L00CBB0AAMNV00BAAIA0 DA180401S KCF DN 50 PN ,3 DM410K00CBB0AAMNV00BAAJA0 DA240401S KCF DN 65 PN ,4 34,8 DM410L00CBB0AAMNV00BAAJA0 DA240401S KCF DN 65 PN ,4 38,5 DM411K00CBB0AAMNV00BAAKA0 DA360401S KCF DN 80 PN ,5 42 DM411L00CBB0AAMNV00BAAKA0 DA360401S KCF DN 80 PN ,5 47,5 DM412K00CBB0AAMNV00BAAMA0 DA720401S KCF DN 100 PN , ,5 DM412L00CBB0AAMNV00BAAMA0 DA720401S KCF DN 100 PN , Item codes in A105 CARBON Steel A105 Carbon steel Actuator Connecting kit Size ANSI N H Kg DM404401CAA0AAMRV000AACA0 DA030401S KCF DN 15 ANSI ,4 5,1 DM405401CAA0AAMRV000AADA0 DA045402S KCF DN 20 ANSI ,7 5,7 DM406401CAA0AAMRV000AAEA0 DA060402S KCF DN 25 ANSI ,4 7,9 DM407401CAA0AAMRV000AAFA0 DA090401S KCF DN 32 ANSI ,5 10,2 DM408401CAB0AAMNV000AAHA0 DA120401S KCF DN 40 ANSI ,4 14,1 DM409401CAB0AAMNV000AAIA0 DA180401S KCF DN 50 ANSI ,9 DM410401CAB0AAMNV000AAJA0 DA240401S KCF DN 65 ANSI ,4 33,6 DM411401CAB0AAMNV000AAKA0 DA360401S KCF DN 80 ANSI ,5 41 DM412401CAB0AAMNV000AAMA0 DA720401S KCF DN 100 ANSI , Item codes in LF2 CARBON Steel LF2 Carbon steel Actuator Connecting kit Size ANSI N H Kg DM404401CBA0AAMRV000AACA0 DA030401S KCF DN 15 ANSI ,4 5,1 DM405401CBA0AAMRV000AADA0 DA045402S KCF DN 20 ANSI ,7 5,7 DM406401CBA0AAMRV000AAEA0 DA060402S KCF DN 25 ANSI ,4 7,9 DM407401CBA0AAMRV000AAFA0 DA090401S KCF DN 32 ANSI ,5 10,2 DM408401CBB0AAMNV000AAHA0 DA120401S KCF DN 40 ANSI ,4 14,1 DM409401CBB0AAMNV000AAIA0 DA180401S KCF DN 50 ANSI ,9 DM410401CBB0AAMNV000AAJA0 DA240401S KCF DN 65 ANSI ,4 33,6 DM411401CBB0AAMNV000AAKA0 DA360401S KCF DN 80 ANSI ,5 41 DM412401CBB0AAMNV000AAMA0 DA720401S KCF DN 100 ANSI , Be environmentally friendly...please don't print this document unless you really need to. 15 / 20
16 Drives - Spring return pneumatic actuator Item codes in A105 CARBON Steel A105 Carbon steel Actuator Connecting kit Size PN N H Kg SM404N00CAA0AAMRV00BAAEA0 SR030402S KCF DN 15 PN ,4 6,2 SM405N00CAA0AAMRV00BAAFA0 SR045401S KCF DN 20 PN ,7 9,1 SM406N00CAA0AAMRV00BAAHA0 SR060401S KCF DN 25 PN ,4 10,4 SM407N00CAA0AAMRV00BAAIA0 SR090401S KCF DN 32 PN ,8 SM408N00CAB0AAMNV00BAAJA0 SR120401S KCF DN 40 PN ,4 20,1 SM409K00CAB0AAMNV00BAAKA0 SR180401S KCF DN 50 PN ,0 SM409L00CAB0AAMNV00BAAKA0 SR180401S KCF DN 50 PN ,0 SM410K00CAB0AAMNV00BAALA0 SR240401S KCF DN 65 PN ,5 SM410L00CAB0AAMNV00BAALA0 SR240401S KCF DN 65 PN ,2 SM411K00CAB0AAMNV00BAAMA0 SR360401S KCF DN 80 PN ,5 51 SM411L00CAB0AAMNV00BAAMA0 SR360401S KCF DN 80 PN ,5 56 SM412K00CAB0AAMNV00BAAQA0 SRN S KCF DN 100 PN SM412L00CAB0AAMNV00BAAQA0 SRN S KCF DN 100 PN Item codes in LF2 CARBON Steel LF2 Carbon steel Actuator Connecting kit Size PN N H Kg SM404N00CBA0AAMRV00BAAEA0 SR030402S KCF DN 15 PN ,4 6,2 SM405N00CBA0AAMRV00BAAFA0 SR045401S KCF DN 20 PN ,7 9,1 SM406N00CBA0AAMRV00BAAHA0 SR060401S KCF DN 25 PN ,4 10,4 SM407N00CBA0AAMRV00BAAIA0 SR090401S KCF DN 32 PN ,8 Be environmentally friendly...please don't print this document unless you really need to. 16 / 20
17 SM408N00CBB0AAMNV00BAAJA0 SR120401S KCF DN 40 PN ,4 20,1 SM409K00CBB0AAMNV00BAAKA0 SR180401S KCF DN 50 PN ,0 SM409L00CBB0AAMNV00BAAKA0 SR180401S KCF DN 50 PN ,0 SM410K00CBB0AAMNV00BAALA0 SR240401S KCF DN 65 PN ,5 SM410L00CBB0AAMNV00BAALA0 SR240401S KCF DN 65 PN ,2 SM411K00CBB0AAMNV00BAAMA0 SR360401S KCF DN 80 PN ,5 51 SM411L00CBB0AAMNV00BAAMA0 SR360401S KCF DN 80 PN ,5 56 SM412K00CBB0AAMNV00BAAQA0 SRN S KCF DN 100 PN SM412L00CBB0AAMNV00BAAQA0 SRN S KCF DN 100 PN Item codes in A105 CARBON Steel A105 Carbon steel Actuator Connecting kit Size ANSI N H Kg SM404401CAA0AAMRV00BAAEA0 SR030402S KCF DN 15 ANSI ,4 6,1 SM405401CAA0AAMRV00BAAFA0 SR045401S KCF DN 20 ANSI ,5 6,8 SM406401CAA0AAMRV00BAAHA0 SR060401S KCF DN 25 ANSI ,4 9,8 SM407401CAA0AAMRV00BAAIA0 SR090401S KCF DN 32 ANSI ,1 SM408401CAB0AAMNV00BAAJA0 SR120401S KCF DN 40 ANSI ,4 17,8 SM409401CAB0AAMNV00BAAKA0 SR180401S KCF DN 50 ANSI ,2 SM410401CAB0AAMNV00BAALA0 SR240401S KCF DN 65 ANSI ,3 SM411401CAB0AAMNV00BAAMA0 SR360401S KCF DN 80 ANSI ,5 49,5 SM412401CAB0AAMNV00BAAQA0 SRN S KCF DN 100 ANSI Item codes in LF2 CARBON Steel LF2 Carbon steel Actuator Connecting kit Size ANSI N H Kg SM404401CBA0AAMRV00BAAEA0 SR030402S KCF DN 15 ANSI ,4 6,1 SM405401CBA0AAMRV00BAAFA0 SR045401S KCF DN 20 ANSI ,5 6,8 SM406401CBA0AAMRV00BAAHA0 SR060401S KCF DN 25 ANSI ,4 9,8 SM407401CBA0AAMRV00BAAIA0 SR090401S KCF DN 32 ANSI ,1 SM408401CBB0AAMNV00BAAJA0 SR120401S KCF DN 40 ANSI ,4 17,8 SM409401CBB0AAMNV00BAAKA0 SR180401S KCF DN 50 ANSI ,2 SM410401CBB0AAMNV00BAALA0 SR240401S KCF DN 65 ANSI ,3 SM411401CBB0AAMNV00BAAMA0 SR360401S KCF DN 80 ANSI ,5 49,5 SM412401CBB0AAMNV00BAAQA0 SRN S KCF DN 100 ANSI Be environmentally friendly...please don't print this document unless you really need to. 17 / 20
18 Drives - Electric actuators Item codes in A105 CARBON Steel A105 Carbon steel Actuator Connecting kit Size PN N H Kg EM404N00CAA0AAMRV00BAMEG0 EA0035A5C000 KCF DN 15 PN ,8 EM405N00CAA0AAMRV00BAMEG0 EA0035A5C000 KCF DN 20 PN ,3 EM406N00CAA0AAMRV00BAMGG0 EA0070A5C000 KCF DN 25 PN ,7 EM407N00CAA0AAMRV00BAMGG0 EA0070A5C000 KCF DN 32 PN ,1 EM408N00CAB0AAMNV00BAMIG0 EA0130A5C000 KCF DN 40 PN ,7 EM409K00CAB0AAMNV00BAMIG0 EA0130A5C000 KCF DN 50 PN ,7 EM409L00CAB0AAMNV00BAMIG0 EA0130A5C000 KCF DN 50 PN ,7 EM410K00CAB0AAMNV00BAMKG0 EA0240A5C000 KCF DN 65 PN EM410L00CAB0AAMNV00BAMKG0 EA0240A5C000 KCF DN 65 PN ,7 EM411K00CAB0AAMNV00BAMNA0 AE KCE DN 80 PN , EM411L00CAB0AAMNV00BAMNA0 AE KCE DN 80 PN , EM412K00CAB0AAMNV00BAMTA0 AE KCE DN 100 PN EM412L00CAB0AAMNV00BAMTA0 AE KCE DN 100 PN ,7 Items available also with modulating actuator Item codes in LF2 CARBON Steel Be environmentally friendly...please don't print this document unless you really need to. 18 / 20
19 LF2 Carbon steel Actuator Connecting kit Size PN N H Kg EM404N00CBA0AAMRV00BAMEG0 EA0035A5C000 KCF DN 15 PN ,8 EM405N00CBA0AAMRV00BAMEG0 EA0035A5C000 KCF DN 20 PN ,3 EM406N00CBA0AAMRV00BAMGG0 EA0070A5C000 KCF DN 25 PN ,7 EM407N00CBA0AAMRV00BAMGG0 EA0070A5C000 KCF DN 32 PN ,1 EM408N00CBB0AAMNV00BAMIG0 EA0130A5C000 KCF DN 40 PN ,7 EM409K00CBB0AAMNV00BAMIG0 EA0130A5C000 KCF DN 50 PN ,7 EM409L00CBB0AAMNV00BAMIG0 EA0130A5C000 KCF DN 50 PN ,7 EM410K00CBB0AAMNV00BAMKG0 EA0240A5C000 KCF DN 65 PN EM410L00CBB0AAMNV00BAMKG0 EA0240A5C000 KCF DN 65 PN ,7 EM411K00CBB0AAMNV00BAMNA0 AE KCE DN 80 PN , EM411L00CBB0AAMNV00BAMNA0 AE KCE DN 80 PN , EM412K00CBB0AAMNV00BAMTA0 AE KCE DN 100 PN EM412L00CBB0AAMNV00BAMTA0 AE KCE DN 100 PN ,7 Items available also with modulating actuator Item codes in A105 CARBON Steel A105 Carbon steel Actuator Connecting kit Size ANSI N H Kg EM404401CAA0AAMRV00BAMEG0 EA0035A5C000 KCF DN 15 ANSI ,7 EM405401CAA0AAMRV00BAMEG0 EA0035A5C000 KCF DN 20 ANSI EM406401CAA0AAMRV00BAMGG0 EA0070A5C000 KCF DN 25 ANSI ,1 EM407401CAA0AAMRV00BAMGG0 EA0070A5C000 KCF DN 32 ANSI ,4 EM408401CAB0AAMNV00BAMIG0 EA0130A5C000 KCF DN 40 ANSI ,4 EM409401CAB0AAMNV00BAMIG0 EA0130A5C000 KCF DN 50 ANSI ,7 EM410401CAB0AAMNV00BAMKG0 EA0240A5C000 KCF DN 65 ANSI ,8 EM411401CAB0AAMNV00BAMNA0 AE KCE DN 80 ANSI , ,5 EM412401CAB0AAMNV00BAMTA0 AE KCE DN 100 ANSI ,7 Items available also with modulating actuator Item codes in LF2 CARBON Steel LF2 Carbon steel Actuator Connecting kit Size ANSI N H Kg EM404401CBA0AAMRV00BAMEG0 EA0035A5C000 KCF DN 15 ANSI ,7 EM405401CBA0AAMRV00BAMEG0 EA0035A5C000 KCF DN 20 ANSI EM406401CBA0AAMRV00BAMGG0 EA0070A5C000 KCF DN 25 ANSI ,1 EM407401CBA0AAMRV00BAMGG0 EA0070A5C000 KCF DN 32 ANSI ,4 Be environmentally friendly...please don't print this document unless you really need to. 19 / 20
20 EM408401CBB0AAMNV00BAMIG0 EA0130A5C000 KCF DN 40 ANSI ,4 EM409401CBB0AAMNV00BAMIG0 EA0130A5C000 KCF DN 50 ANSI ,7 EM410401CBB0AAMNV00BAMKG0 EA0240A5C000 KCF DN 65 ANSI ,8 EM411401CBB0AAMNV00BAMNA0 AE KCE DN 80 ANSI , ,5 EM412401CBB0AAMNV00BAMTA0 AE KCE DN 100 ANSI ,7 Items available also with modulating actuator Be environmentally friendly...please don't print this document unless you really need to. 20 / 20
Features BALL VALVES. Thor Split Body Stainless steel PN ANSI 600 STANDARD FEATURES CERTIFICATIONS ENGINEERING STANDARD
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
More informationFeatures BALL VALVES. Brass ball valve ITEM 160,161-3-way threaded-ends GENERAL FEATURES ON REQUEST
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
More informationFeatures BALL VALVES. Brass ball valve ITEM way full-bore threaded-ends GENERAL FEATURES ON REQUEST APPROVALS
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
More informationFeatures PNEUMAT IC VALVES. Pneumatic valves Vip - Pneumatic coaxial valve GENERAL FEATURES CONTROL MEDIA OPERATING MEDIA
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 730 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) Ø L A B PD PE PD C D E F Kg
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0
More informationBALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
More informationFeatures PNEUMATIC ACTUATORS. Stainless steel pneumatic actuators Spring return SR from bar. Technical features. Working condition
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
More informationMaterials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Flanges R.F. Class 300 (PN50) - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire
More informationTrunnion Ball Valves
Ball Valves Ball Valves TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationTrunnion Ball Valves
Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high
More informationValves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+ CARBON STEEL Type: ball valve ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar - 250 Bar
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
More informationTwo-Way Soft Seated Ball Valve Type 14-S
Two-Way Soft Seated Ball Valve Type 14-S Design Characteristics Two piece body Trunnion mounted ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design
More informationFully Welded Ball Valves
Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationRAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600
The ideal valve to minimize any risk of fugitive emissions from flanges in the natural gas and oil industry FEATURES GENERAL APPLICATION The Fig. 5600 valves have been designed for gas transportation and
More informationTwo-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
More informationMaterials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" to 8" ) ISO PN50 ANSI 300 R.F. - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire safe BS 6755-2
More informationMars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
More informationMaterials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 250 mm Between flanges PN16/40-28 C + 200 C Max Pressure : 40 Bars up to DN80, 16 bars over Specifications : With ISO 5211 mounting pad Contents
More informationBall Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationBUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PE PD C D E F Kg
More informationBUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic
B C D FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic G F L The pneumatic actuator is calculated for 6
More informationMaterials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to 100 mm Flanges R.F. PN40-20 C + 220 C Max Pressure : 40 Bars Specifications : ISO 5211 mounting pad PTFE filled with stainless
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
More informationTwo-Way Metal Seated Ball Valve Type 85-M
Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
More informationTrunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
More informationFSB 35 Fire-Safe FIRE-SAFE ANTI-STATIC
FSB 35 Fire-Safe 0035 FIRE-SAFE ANTI-STATIC /6/EU SAFETY 2 FSB 35 Strong & Reliable (A) ISO52 Actuator Direct Mount Square stem and twin ISO 52 pattern mounting pad allow for easy actuator installation
More informationFeatures PNEUMAT IC VALVES. Angle seat valves Special ends GENERAL FEATURES OPERATING MEDIA CONTROL MEDIA
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
More informationRef FIRE SAFE BALL VALVE ISO PN50 ANSI Model/Ref:
FIRE SAFE BALL VALVE ISO PN50 ANSI 300 Model/Ref: 768-769 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN50 ANSI300 R.F. Flanges -50 C in
More informationTwo-Way Metal Seated Ball Valve Type 16-R
Two-Way Metal Seated Ball Valve Type 16- Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
More informationØ 5. L2 DN-300 (12 ) to DN-400 (16 Class-150 & 300 Ø P. N h. 4x900=360. n x Øs Ø 5 Ø P Ø R Ø T. n x ØS BALL VALVES ØP ØR ØT
J H Ø T Ø R Ø 5 L2 DN-3 (12 ) to DN-4 (16 Class-1 & 3 DN-1 (6 ) to DN-3 ØI X B Y L Ø P M n x Øs B N h C 4x9=36 J Ø 5 Ø P I n x ØS ØP ØR ØT 1 J B C R3 BALL VALVES L M Ø T Ø R n x Øs I Ø5 5 R1 ØP Ø P L ISO
More informationTwo-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
More information2 PIECES BALL VALVE PN63
2 PIECES BALL VALVE PN63 Model/Ref: 756-757 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN20 ANSI150 R.F. Flanges -50 C in SS and -29 C
More informationBALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationTrunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
More informationISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design
TM ISV Series BF1BU Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design For Oil & Gas Production, Chemical, Petro-Chemical & Industrial applications Sizes 1/2 through
More informationDescription. Soft-seat seal TFM Antistatic device EN Anti Blow-out stem. Cavity filler seatin PTFE. Stainless steel lever
Pascal Control Sdn. Bhd. Omal Thor Split Body Carbon Steel PN 16-40 ANSI 150-300 Omal Standard for connecting flanges EN 1092-1 ed. 2008; ANSI B16.5 Pressure class PN16-40; ANSI 150-300 Intercepted fluid
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More information516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
More informationFo ge Steel Floating Ball Valves
Fo ge Steel Floating Ball Valves 26 Design and Inspection Standard: Pressure-Temperature Ratings Shell Wall Thickness Face-to-face Dimensions End connection Dimensions Pressure Test Fire Safe Test Marking
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 1370 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) Ø L C PD PE PD D E F Kg PE D E
More informationBall Valve VM Options. General. Modular selection of system components. steel or stainless steel DN PN 100/40 flanges
Ball Valve VM 4460-4466 steel or stainless steel DN 15-200 PN 100/40 flanges General 2-piece ball valve with a unique sealing element design. Modular selection of system components. Supports pressurization
More information736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR VALVE FEATURES The 736 XS-746 XS is a 3 pieces full bore ball valve for industrial fluids, especially made to be easily actuated and to offer a good and long
More informationM21Fi ISO Ball Valve DN15 to DN150
Page 1 of 6 TI-P133-81 ST Issue 1 M21Fi ISO Ball Valve DN15 to DN150 Description The M21Fi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. It is designed to be
More informationGLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
More informationPBV. Threaded and Socketweld Ball Valves P.B.V.
PBV Threaded and Socketweld Ball Valves P.B.V. TABLE OF CONTENTS Overview...3 How to Identify PBV-USA Valves...4 Seat Materials...5 Materials/Parts/Dimensions/Weights Master Star - 5333/6333...6 Superstar
More informationMADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Class 150 (PN20) R.F. Flanges -50 C in SS and -29 C in carbon steel + 230 C Max Pressure : 20 Bars
More informationM21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Stainless steel ASTM A351 CF8M. Certificate 3.1
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 mm Flanges R.F. PN40-30 C + 220 C Max Pressure : 40 Bars Specifications : Antistatic device ISO 5211 mounting pad Anti blow-out stem Fully
More informationGWC Italia. Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003
w w w. g w c i t a l i a. c o m GWC Italia Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003 1 1 GWC ITALIA Proven technology for individual valve solutions
More informationRAM Company USA Products Line
RAM Company USA Products Line Trunnion Mounted Ball Valves Metal Seated Ball Valve 3-Way Ball Valve Jacket Ball Valve Ball Valves with Actuator Trunnion Mounted Ball Valves Main Features DOUBLE PISTON
More informationBALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
More informationM21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
More informationGWC Italia. Proven technology for individual valve solutions worldwide. flanged floating ball valves FBV-1002
GWC Italia Proven technology for individual valve solutions worldwide flanged floating ball valves FBV-1002 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide Network
More informationKeystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
More informationGhibson Italia s.r.l. via Cassola 6/ Monteveglio (BO) Italy. Butterfly valves
HD series valve HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes 7 Pneumatic actuators
More informationTECHNICAL BULLETIN. Valtek ShearStream SB Control Valves. Segmented V-port Ball Valves. Experience In Motion VLEETB
TECHNICAL BULLETIN Valtek ShearStream SB Control Valves Segmented V-port Ball Valves VLEETB4152-03 11.02 Experience In Motion Primary characteristics ShearStream SB is a ball sector valve with metal-to-metal
More informationWKM 320F. Flanged floating ball valves
WKM 20F Flanged floating ball valves Contents WKM 20F Flanged Floating Ball Valves Features and benefits.................................................................... Exploded views and specifications....................................................5
More informationGWC Italia. Proven technology for individual valve solutions worldwide THREADED AND SOCKET WELD FLOATING BALL VALVES SBV-1002
GWC Italia Proven technology for individual valve solutions worldwide THREADED AND SOCKET WELD FLOATING BALL VALVES SBV-1002 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w
More informationStandard Port, Uni-Body Flanged Ball Valves
USA 800-766-0076 Fax 323-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Standard port, Uni-body design
More informationHD series. HD Series 1 technical data 1 components DN RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4
HD series double eccentric HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 tables dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes
More informationBlock & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
More informationMADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C Max Pressure : 20 Bars Specifications : ISO 5211
More informationIntroduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
More informationFor ball valves
Soft seal Ball valve Float ball valve Flange PN16-40 DN15-200 For 1.4408 ball valves Range of application: In industrial facilities, oil and chemical industry and related manufacturing industries Temperature
More informationSize : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Carbon steel or stainless steel. Page 1
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C 20 Bars ISO 5211 mounting pad PTFE filled
More informationK-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180
SERIES 180 R180/R180F Reduced Bore Design F180/F180F Full Bore Design FEATURES Ball valve designs with screwed or weld end connections. ISO 5211 top mounting plate for easy actuation. Investment cast body
More informationSeries FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features Fire Safe API 607 4TH Edition flanged valves
More informationBall Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
More informationMultiway Ball Valve with Vertical In-/Outlet Metal Seated. Type 24-M. Approvals
Multiway Ball Valve with Vertical In-/Outlet Metal Seated Type 24-M Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe
More informationThree-Way Metal Seated Ball Valve Type 21-M
Three-Way Metal Seated Ball Valve Type 21-M Design Characteristics Split body Trunnion mounted ball with - or T-port and integral stem ive loaded stem packing Spring loaded seat system Fire Safe design
More informationBLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
More informationKEYSTONE. The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions.
KEYSTONE The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck for insulation service.
More informationSeries 50 Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Full port, split body design
More informationTRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
More informationNELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
More informationRef FIRE SAFE BALL VALVE ISO PN16/40 FLANGED. Model/Ref:
Ref. 753-753 Model/Ref: 752-753 www.lauridsenindustri.com Ref. 752-753 Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ISO PN16/40 Flanges -50 C in SS and -20 C in carbon steel + 250
More informationFLANGED 150 & 300 FULL PORT BALL VALVES
FLANGED 150 & 300 FULL PORT BALL VALVES AGA - APPROVED MANUAL & AUTOMATIC FLANGED STEEL BALL VALVES - EMICO FIGURE NUMBERING SYSTEM E A 25A 25J 402 F C X EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL
More informationPRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
More informationHigh pressure valves. Inspired By Challenge
Inspired By Challenge Floating Valves High pressure General Series 7 Series 8 Series Introduction Ordering code system The Habonim high pressure valve series is based on a floating ball valve technology,
More informationPRODUCT EVOLUTION. Be careful, our valves Ref.702 are changing
PRODUCT EVOLUTION Be careful, our valves Ref.702 are changing We currently have 2 different types available (according to DN) with different dimension and non-commutable gaskets Old marking : New marking
More informationPeter Meyer Ball valves Cryogenic
Peter Meyer Ball valves Cryogenic Features Swiss manufacturer One-piece body design Laser welded, whitout body seal Chambered seats Cryogenic extension Cavity pressure relief system Replaceable packing
More informationBUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
More informationDouble Block and Bleed Plug Valves
Double Block and Bleed Plug Valves ASME Class 150 to 600 50 mm to 1050 mm (2 to 42 ) API 6D L&T Valves L&T Valves is a wholly owned subsidiary of Larsen & Toubro. Backed by a heritage of excellence that
More informationBUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
More informationThe Company LCM ITALIA, which is part of CHERO group, was established
Contents oreword Applicds Quality Assurance and Certification Technical Features of Floating Ball Valve Assembly Drawing of Floating Ball Valve Standard Materials selection of Floating Ball Valve Production
More informationS GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More information16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
More informationInternational Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3EU, BT3E & BT3G Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API 6D Fire
More informationHigh Performance Butterfly Valves
Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6
More informationBR 26d Ball valve. Stainless Steel. Application: Versions: Special versions:
Application: Stainless Steel BR 26d Ball valve Tight-closing Ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN 15
More informationMADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 300 mm PN16/40 R.F. Flanges -50 C in SS and -20 C in carbon steel + 230 C Max Pressure : 40 Bars up to DN50, 16 Bars over
More informationCHEMAT. Two-Piece Ball Valves Series CAPRO type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18)
type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18) CHEMAT High quality requirements and technical standards of the chemical industry have been used as basic design parameters for these
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
More information