Evans SN Series. Evans. Sanitary & Vacuum Ball Valves
|
|
|
- Abigail Rogers
- 6 years ago
- Views:
Transcription
1 SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish
2 The SN Series line of sanitary ball valves for the Pharmaceutical and Bio-pharm Industries The valves are designed with a true bore and come standard with Cavity Free TFM seat inserts which makes them ideal for applications which require maximum flow capacity at minimum pressure drop, where sterility, clean-ability and drain-ability are essential. The SN Series ball valve provides tight shutoff and has exceptional cycle life performance. The Viton O-ring stem seal also makes this valve ideal for vacuum applications up to a 1 x 10-7 scc/sec helium leak rate. Size Range: 1/2-4 Service: Clean Steam, Purified Water, Water for Injection (WFI), Gas, Chemicals, Solvents, Vacuum Service Standards: Conforming to ASME BPE-2016, ANSI B16.34, API 598 Operation: Hand operated, Air operated (spring return, double acting), solenoid assist, limit switch Features & Specifications: Stem: Live loaded PTFE stem compensates for seat wear. Conforms to ASME/BPE 2016 SG Grounded (Anti-Static) Design Seats: PTFE 1600, non-slotted design to meet ASME/BPE 2016 SD-3.6.1, SG , SG Steam Pressure Rated: 150 psig at 350F Max Pressure Rating: 1/ psig / 69 bar 2-1/ psig / 55 bar Temperature Range: -4 to 356F / -20 to 180C Internal Finish: Polished to meet ASME/BPE 2016 DT-12 and Table SF-6, mechanically polished to SFV1, electro polished to SFV4. Helium Leak Tested: 1 x 10-7 scc/sec Markings: Valves shall be marked to conform to ASME/BPE 2016 DT-3 Packing: Valves shall conform to ASME/BPE 2016 DT-12 Options: Air Operators, Solenoid assist, Limit switch Mechanical Specifications: The ID for the valve flow path (ball, seats, end flanges) shall be the same ID as the tubing as per ASME/BPE 2016 DT-1 Cast Ball Valve Body, Cap: ASTM A351 Gr. CF3M Ball, Stem: SS 316 or SS 316L T-Clamp Style Flange: ASTM A351 Gr. CF3M (316L), dimension per ASME/BPE 2016 DT-22 Butt-weld Flange: ASTM A351 Gr. CF3M (316L), dimension per ASME/BPE 2016 DT-5, Sulfur content between 0.005% and 0.017% 1 Components Inc.
![Conversion Table for Surface Finishes True Port Body & Stem Construction Table SF-3 R a Readings for Product Contact Surfaces Mechanically Polished [Note (1)] R a Max.](/docs-images/79/78975343/images/3-2.jpg "Code ASME/BPE Surface Designation µ-in. µm None SF0 < 32 < 0.8 MP1 SF1 20 0.51 MP2 SF2 25 0.64 MP3 SF3 30 0.76 Mechanically Polished [Note (1)] and Electropolished R a Max. µin. µm EP1 SF4 15 0.")
3 Conversion Table for Surface Finishes True Port Body & Stem Construction Table SF-3 R a Readings for Product Contact Surfaces Mechanically Polished [Note (1)] R a Max. Code ASME/BPE Surface Designation µ-in. µm None SF0 < 32 < 0.8 MP1 SF MP2 SF MP3 SF Mechanically Polished [Note (1)] and Electropolished R a Max. µin. µm EP1 SF EP2 SF EP3 SF Surface finishes of the flow path for SN Series valves come standard machined to a 20 Ra (SF1) mechanical surface finish, other surface finishes available upon request. The ball valve construction is designed in accordance with ANSI B The cavity free seal is fully encapsulated which offers improved sealing under a variety of demanding applications. The center body comes standard with an ISO 5211 mounting pad for attaching air operators, limit switches, etc. All wetted parts of the body are machined to a high finish. All valves have a blowout proof stem. The stem assembly incorporates a bevel spring live loaded design that compensates for pressure, temperature and wear. The stem is highly polished for better sealing and the handle comes standard with lockout feature. Components Inc. 2
4 Manual Materials of Construction Item Description Material Qty. 1 Body ASTM-A351-CF3M 1 2 End Cap ASTM-A351-CF3M 2 3 Ball A351-CF3M 1 4 Seat PTFE 2 5 Gasket PTFE 2 6 Stem SUS Thrust Washer PTFE,TEFLON 1 8 Stem Packing PTFE,TEFLON 1 9 Bolt SUS Hex Nut SUS Bolt Washer SUS Gland SUS Washer SUS Nut SUS Handle SUS Plastic Sleeve Plastic 1 17 Lock Device SUS Stop Pin SUS Components Inc.
5 Air Operated Valve Dimensions INCH SIZES (mm) SIZE CV ØA ØB L H 1/ (9.4) 3/ (15.8) (22.1) 1-1/ (34.8) (47.5) 2-1/ (60.2) (72.9) (97.4) Dimensions are +/- 0.3 *C/F - Consult Factory 0.50 (12.7) 0.75 (19.1) 1.00 (25.4) 1.50 (38.1) 2.00 (50.8) 2.50 (63.5) 3.00 (76.2) 4.00 (101.6) 3.50 (89) 4.02 (102) 4.49 (114) 5.43 (138) 6.14 (156) 6.69 (170) 7.76 (197) 9.53 (242) Cavity Free Ball Valve Seat Inserts 1.46 (37) 1.85 (47) 2.25 (57.2) 3.08 (78.2) 3.39 (86.2) 4.30 (109.2) 4.63 (117.7) 5.60 (141.2) ISO SIZES (mm) SIZE CV ØA ØB L H Components Inc. 4
6 Sanitary Tube Extension Ball Valves Dimensional Information TUBE EXTENSION VALVE CLAMP VALVE ISO SIZES (mm) SIZE ØA ØB L H ISO SIZES (mm) SIZE ØA ØB L H SIZE CV ØA ØB L H 1/ (9.4) INCH (mm) SIZES 3/ (15.8) (22.1) 1-1/ (34.8) (47.5) 2-1/ (60.2) (72.9) (97.4) 0.50 (12.7) 0.75 (19.1) 1.00 (25.4) 1.50 (38.1) 2.00 (50.8) 2.50 (63.5) 3.00 (76.2) 4.00 (101.6) 3.50 (89) 4.02 (102) 4.49 (114) 5.43 (138) 6.14 (156) 6.69 (170) 7.76 (197) 9.53 (242) 1.46 (37) 1.85 (47) 2.25 (57.2) 3.08 (78.2) 3.39 (86.2) 4.30 (109.2) 4.63 (117.7) 5.60 (141.2) Dimensions are +/- 0.3 *C/F - Consult Factory SIZE CV ØA ØB L H 1/ (9.4) INCH (mm) SIZES 3/ (15.8) (22.1) 1-1/ (34.8) (47.5) 2-1/ (60.2) (72.9) (97.4) 1.00 (25.4) 1.00 (25.4) 1.99 (50.5) 1.99 (50.5) 2.52 (64) 3.05 (77.5) 3.58 (91) 4.69 (119) 3.50 (89) 4.02 (102) 4.49 (114) 5.43 (138) 6.14 (156) 6.69 (170) 7.76 (197) 9.53 (242) 1.46 (37) 1.85 (47) 2.25 (57.2) 3.08 (78.2) 3.39 (86.2) 4.30 (109.2) 4.63 (117.7) 5.60 (141.2) 5 Components Inc.
7 Part Numbering Upstream Body Downstream INLET OUTLET SN - 16 STR - TT - TF - NC Series Size Configuration End Conn. Seat Options Series Designator SN - 316L Stainless B.V. 5. Seat Option TF - PTFE Cavity Free 2. Valve Size Designator 04 - (ISO - 8) 32-2 (ISO - 50) 06 - (ISO - 10 ) /2 (ISO - 65) 08-1/2 (ISO - 15) 48-3 (ISO - 80) 12-3/4 (ISO - 20) 64-4 (ISO - 100) 16-1 (ISO - 25) /2 (ISO - 40) 3. Configuration STR - Straight Pattern ST3L - 3-Way L-Pattern ST3T - 3-Way T-Pattern 6. Options Mechanical Polished MP1-20 Ra SF1 Electro Polished EP1-15 Ra SF4 EP2-20 Ra SF5 EP2-25 Ra SF6 Air Actuators NC - Normally Closed Air-op NO - Normally Open Air-op DA - Double Acting Air-op Solenoid Assist / Limit Switch VDC Solenoid Assist VAC Solenoid Assist VAC Solenoid Assist LS - Nema 4.4 X Limit Switch W/ Beacon EX - Explosion Proof Option 4. End Connections T - Clamp Fitting (INCH) M - 316L Tube Extension (INCH) K DN/ISO Tube Extension (ISO) H - Clamp Fitting (ISO) Components Inc. 6
8 Air Operator, Limit Switch and Solenoid Specifications 1 BODY: Extruded aluminum alloy ( Hard anodized ) 2 PISTONS: Die cast aluminum alloy 3 BEARING: Nylon 4 O-RING: Buna-N 5 O-RING: Buna-N 6 END CAP(L): Die cast aluminum alloy 7 WASHER: Stainless steel 8 CAP SCREW: Stainless steel 9 O-RING: Buna-N 10 BEARING: Nylon 11 STOP CAM: Sinteral steel 12 PISTON INDICATOR: Polyethylene 13 RETAINING RING: Stainless steel 14 WASHER: Stainless steel 15 BEARING: Nylon 16 RETAINING RING: Stainless steel 17 PINION: Carbon steel (Electro-less nickel plated) 18 BEARING: Nylon 19 O-RING: Buna-N 20 O-RING: Buna-N 21 WASHER: Stainless steel 22 NUT: Stainless steel 23 NUT: Stainless steel 24 O-RING: Buna-N 25 END CAP(R): Die cast aluminum alloy Performance Operating Pressure Range: 40 to 120PSIG. Maximum Allowable Working Pressure: 150PSIG. Maximum Operating Pressure: 120PSIG Operating Temperature Standard: -40 F to +200 F Operation For clockwise output, the volume between the pistons is exhausted at P1, causing the springs to force the pistons together. The volume outside the pistons is vented at P2. Limit Switch Specifications Area Classification: NEMA 4, 4X, Explosion proof (optional) Enclosure: Terminal Strip 8 point standard Materials of Construction Housing & Cover: Engineered Resin Shaft: Stainless Steel Fasteners: Stainless Steel Beacon Monitor: Copolyester For counterclockwise output, apply pressure to P1, which force the pistons apart and compress the springs. The linear travel of the pistons is converted to a rotation of the drive shaft by the rack to pinion connection. The volume outside each piston is exhausted at P2. 7 Components Inc.
Evans Ball Valves. Evans. High Purity 316 Stainless
Ball Valves High Purity 316 Stainless BA Series 1/4-20 and (15A-489A) s CFOS Cleaned and Bagged Integrated Valve Assemblies Standard Spool Assemblies & Custom Spool engths (Customer Specified In Feet)
Section G Series 77 High Purity Ball Valve Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Biotechnology, Pharmaceutical and Electronics Processing Industries www.toplineonline.com
Evans Ball Valves. Evans. High Purity 304 Stainless
Ball Valves High Purity 304 Stainless SG Series 1/4-12 and 15A-300A s CFOS Cleaned and Bagged Integrated Valve Assemblies Standard Spool Assemblies & Custom Spool engths (Customer Specified in Feet) 100%
Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
Mark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves
Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2007. From the materials
Mark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves
Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2014. From the materials
Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
Valves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE
Valves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE Design & Features ASME / BPE-2009 Designed specifically for the demanding process requirements found in the pharmaceutical,
Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves
SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
Double Acting & Spring Return. SERIES 92/93 Rack & Pinion PNEUMATIC ACTUATOR. The High Performance Company
PNEUMATIC ACTUATOR SERIES 92/93 Rack & Pinion Double Acting & Spring Return The High Performance Company SERIES 92/93 Styling, strength, compactness, and simplicity of design have been combined to produce
Bushing Viton O-ring (Other material available) Anti-Static Device
Triac 88 Series 3 -Piece Ball Valves feature a direct mount automation pad. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with
Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
Control Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations
CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations www.clarksol.com SERIES 8P0O80/82/135/136 SERIES 8P0129/131(T,L) 80: Direct mount
APS SERIES. Air Pump Shut Off Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS APS SERIES APS-DBV-4FP 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com A0SR Standard Features Indicator A position indicator
Manual & Automated Ball Valves
Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 9000 Series DM9000
The VALTORC 520-SN Series 3/4/5-Way Sanitary Ball Valve. Standard Features and Benefits. Specifications
The VATORC 50-SN Series 3/4/5-Way Sanitary Ball Valve The 50-SN is a true multi-way Ball valve with balanced seat construction. Porting and shut-off capabilities can reduce the number of process valves
Series 50 Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Full port, split body design
505F Multi-Port Ball Valve
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way
Series 35 Direct Mount 3-Piece Full Port Ball Valves
Series 35 Direct Mount 3-Piece Full Port Ball Valves ¼ 4 (DN8 DN100) 1000 psi (PN64) 0035 20/68/EU SAFETY 2 Series 35 Ball valves feature direct mount DIE ERSTE s Series 35 ball valves feature direct mount
Series FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features Fire Safe API 607 4TH Edition flanged valves
Standard Port, Uni-Body Flanged Ball Valves
USA 800-766-0076 Fax 323-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Standard port, Uni-body design
Sanitary Solutions Valves/Product Recovery System Catalog Distributed By:
Sanitary Solutions Valves/Product Recovery System Catalog Distributed By: Air Blow Check Valves SSABCV-Size-Alloy SSABCV-FNPT-Size-Alloy SSABCV-RHB-Size-Alloy Air Blow, Y-Ball, Check Valve Sanitary Solutions
505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F
SERIES 17 3 & 4 WAY BALL VALVE
SERIES & WAY BALL VALVE CARBON STEEL ASTM A WCB STAINLESS STEEL ASTM A CF8M LIVE LOADED STEM PACKING BLOWOUT PROOF STEM AVAILABLE IN T, L, LL & 80 PORT CONFIGURATION LOCKABLE HANDLE ISO MOUNTING PAD SEAT
PNEUMATIC QUARTER TURN RACK & PINION ACTUATOR MODEL - HP
FEATURES AND BENEFITS Aluminium body, hard anodized, internally polished to 45-50µ and Nickel plated to protect against wear and corrosion Open/Closed indicator is standard on all models Travel adjustment
DM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:
Ball Valves. Quality Valves at Low Cost
Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct
DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
FPS Safety Shut-Off Valves. CSA and FM Approved
FPS Safety Shut-Off CSA and FM Highly Visible Beacon/Indicator FPS FPS is a leader in reliable, cost-effective shut-off valve technology. Our automatic and manual shut-off valves are in service in industries
Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
MODEL NUMBER - VALVE SELECTION CODES
Threaded Valves Model Selection Page: 1 S85 S51 1 08-3 - R - R - L 05 - B - T - T - L - 3-4 - 5-6 S0 S80 S70 S51 1 Type S0FS S85 S90 HP6000 S40 HX10000 01 1/4" 05 1" 09-1/" Size 0 3/8" 06 1-1/4" 10 3"
Section G TOP-FLO Series 77 High Purity Ball Valves Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Pharmaceutical, Biotechnology, and Electronics Processing Industries
Manual & Automated Ball Valves
Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 4600 Series 8700 Series
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
K-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180
SERIES 180 R180/R180F Reduced Bore Design F180/F180F Full Bore Design FEATURES Ball valve designs with screwed or weld end connections. ISO 5211 top mounting plate for easy actuation. Investment cast body
SPN II. S h a r p e T o l l Free (877) F a x (708)
SPN II S h a r p e T o l l Free (877) 774-2773 F a x (708) 562-9250 www.sharpevalves.com 1 SPN II Pneumatic Actuator Rack & pinion design The standard actuator configuration has hard anodized aluminum
Bushing Viton O-ring (Other material available) Anti-Static Device
API 607-6th Edition Triac unibody flanged ball valves feature a high quality investment cast body and end. They are available in 1/2 through 6 regular port. Superior leak protection is accomplished by
brochure PN
brochure PN-2013-01 www.bitorq.com/pneumatic.html Pneumatic Actuators PAGES 4-11 ON THE WEB AT BITORQ.COM/PNEUMATIC_PN.HTML COMPACT, RELIABLE DESIGN OPEN-CLOSED ADJUSTMENT STOPS DOUBLE ACTING AND SPRING
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port ROCKER PACKING GLAND 36 stainless steel, rocker shaped packing gland compensates for uneven adjustment of gland bolts. ISO 5 MOUNTING
509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
50F Multi-Port Flanged Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 50F Series //5-Way Flanged Ball
MTC Series. Double Acting and Spring Return Actuator and Accessories. MasterTorq. Pneumatic Actuators. Atex Class 2
Double Acting and Spring Return Actuator and Accessories MTC Series TM Pneumatic Actuators Atex Class Operations Double Acting A B A B By supplying air to Port A, pressure is applied to the center chamber
Pneumatic Rack & Pinion Actuator
Pneumatic Rack & Pinion Actuator 4120 N.E. Columbia Blvd. Portland Oregon USA 97211 Phone: 503-287-8383 Fax: 503-281-9677 www.fnwvalve.com STANDARD FEATURES Torque output range from 40 to 32,315 inch-pounds
Section 21 Actuators. (Electric and Pneumatic) Edition 2
Section 21 Actuators (Electric and Pneumatic) Edition 2 291 [21] ACTUATORS Pneumatic Actuator FEATURES OF SINGLE AND DOUBLE ACTING ACTUATORS - Self Energizing V-Seal piston ring - Double rack & Pinion
High Performance Butterfly Valves
Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6
SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
Ball Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
L J H F
Tech Bulletin Page 36-12 Page 1 2PC DIRECT-MOUNT AUTOMATION SERIES Flanged End DMF15 Econoflo Series Valve Features 2-Piece Body, Full Port Design 1/2 to 4 Sizes ANSI Class 150 Flanged Ends Body: CF8M,
Mark 95 Series. Sanitary Valves Mark 95 Sanitary Back Pressure Regulators. Sanitary Back Pressure Regulators
Mark 95 Series CRN Registration Number vailable Sanitary Back Pressure Regulators The Mark 95 is available with a hard or soft seat and a variety of diaphragm and o-ring materials, making the valve well-suited
Mark 9020 Series. Sanitary Ball Valves. CRN Registration Number Available. condensate drain. See pages 9 & 10. New: Optional Integral bottom
Mark 9020 Series Sanitary Ball Valves CRN Registration Number Available New: Optional ntegral bottom condensate drain. See pages 9 & 10 The Mark 9020 Series ball valves take ASME BPE guidelines to heart.
KEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,
ivp PROGRAM FNW Ball Valves
ivp PROGRAM FNW Ball Valves PROGRAM OVERVIEW For actuation and accessories, FNW utilizes Wolseley Industrial Group Valve & Automation, or WIGVA. This facility located in Portland, Oregon is a premier valve
RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 730 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) Ø L A B PD PE PD C D E F Kg
SVC/SHC Series. Sanitary Check Valves. NEW - SVC for vertical down process outflow and drain installations. Features
SVC/SHC Series Sanitary Check Valves NEW - SVC for vertical down process outflow and drain installations The patented SVC/SHC Series are vertical and horizontal check valves designed specifically for use
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 1370 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) Ø L C PD PE PD D E F Kg PE D E
Open And Closed Locking Device for Positional Safety Lockout. Simplify All Aspects of Piping Systems with Flo-Tite s Multiport Ball Valves
FLO TITEE valves & controls TM Tech Bulletin Page 90-11 3 & 4 Way Multi-Port Ball Valves MULTI-PORT SERIES Extremely Versatile Valve Design for Diversion or Mixing Models: Flanged End ANSI/Class 150 MPF15
TUBE BORE SIZE BALL VALVE
BULLETIN P-0 INDUSTRIAL VALVES LTD. S E R I E S TUBE BORE SIZE BALL VALVE Size Range: Application: Service: Material: End Connection: Standards: Operation: /" - " Pharmaceutical, Biotechnology, Food &
JSRLP Series Low Pressure Reducing Valves for Bio-Pharm Gas Applications
JSRLP Series Low Pressure Reducing Valves for Bio-Pharm Gas Applications JSRLP is a high purity gas low pressure regulator designed and built specifically for hygienic, ASME BPE gas applications. The JSRLP
C Series Pneumatic Rack & Pinion Rotary Actuators
Allied Flow Controls, Inc. C Series Pneumatic Rack & Pinion Rotary Actuators Spring Return & Double Acting Features and Benefits Torque Range at 0 Psig Air Pressure: Double Acting: -,00 lbf-in Spring Return:
Section G TOP-FLO T4V Sanitary V-Port Control Ball Valves Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Pharmaceutical, Biotechnology, and Electronics Processing Industries
Ball Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
DRAFT August 12, :56 PM
DRAFT August, 04 3:56 PM SERIES 7000/8000 3 PIECE FULL PORT 4-7000 - 36SS 8000 - WCB 7000/8000 SERIES BALL VALVES Flow-Tek s Series 7000 and 8000 ball valves offer the highest flexibility in selection
Indianapolis Chicago San Juan SVF CleanFLOW HIGH PURITY BALL VALVES
SVF CleanFLOW HIGH PURITY BALL VALVES The latest ASME/BPE guideline for valve and tubing designs used in biotech and pharmaceutical applications provides process engineers with a reliable and measurable
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
Family of Products 1100 SERIES 1500 SERIES. 3 Piece Full Port Fire Safe Ball Valve ANSI Class WOG
Family of Products 3210 S. Susan St, Santa Ana, CA 92704 Tel (714) 427-0877 Fax (714) 427-6392 www.avcovalve.com 1100 SERIES 3 Piece Full Port Fire Safe, PCTFE, PEEK, 1500 SERIES 3 Piece Full Port Fire
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
Keystone Figures 310/312 K-LOK Butterfly Valves
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,
V Series Control Port Ball Valves
Triac V Series Ball Valves are ideal for achieving more precise control with the simplicity and sealing features of a ball valve. We offer them 1/2 4 in a 3-piece design and 1/2 6 flanged. The standard
PRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured
PRODUCT OVERVIEW For over 30 years, FluoroSeal has been manufacturing and customizing a wide range of valves, and accessories for many industries including Oil & Gas, Petrochemical, Chemical, Mining, Pharmaceutical,
TABLE OF CONTENTS. 2
TABLE OF CONTENTS HIGH PERFORMANCE BALL VALVES...PAGE 3 FIRE SAFE BALL VALVES...PAGE 6 SEAL WELD BALL VALVES...PAGE 9 MULTI PURPOSE BALL VALVES...PAGE 12 BUTTERFLY BALL VALVES...PAGE 17 MULTI-TURN VALVES...PAGE
TY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
FROM SIMPLE TO COMPLEX DESIGNS. Flo-Tite Offers A Complete Line of High Quality Engineered Ball Valves For Your Most Demanding Applications
SG-2013 BALL VALVES FROM SIMPLE TO COMPLEX DESIGNS Sanitary Valves Cryogenic Valves Automated Valves Fusible Link Valves Cavity Filled Valves V-Port Control Valves Dribble Control Valves Instrumentation
SERIES 86 INSTRUMENTATION 3-PIECE TUBE FULL PORT BALL VALVES
SERIES 86 INSTRUMENTATION 3PIECE TUBE FULL PORT BALL VALVES SHARPE SERIES 86 INSTRUMENTATION BALL VALVES STANDARD FEATURES Tube Full Port Design (TFP) 3Piece Design Integral ISO Mounting Pad Lockable Handle
CV3000 Series. Control Ball Valve 4000 psi WOG (276 bar) Fully Customizable Flow Control Inserts Carbon, Stainless, Alloy Bar Stock Construction
4 psi WOG (276 bar) CV3 Series CV3F-xxx Series Full Port Valve CV3R-xxx Series Reduced Port Valve Features Uni-directional control valve Zero leakage shutoff, soft seated Upstream Cv plate control element
10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction
1F-xxx Series Valve Quick Spec Product Scope Size Range 1/4" 2", (Sch 16 Pipe Bore) 2"Reduced; 3" Double Reduced Body Type 3-pc, non Swing-out design, Optional Ends Pressure Rating up to 6 psi WOG & up
Swagelok Alternative Fuel Ser vice (AFS) Ball Valves
www.swagelok.com Swagelok Alternative Fuel Ser vice (AFS) Ball Valves For High-Pressure, High-Flow Applications Swagelok AFS Ball Valves Working pressures up to 6000 psig (413 bar) Flow coefficients (C
Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
Mark 908 Series. Pressure Regulators Mark 908X Piloted Blanketing Regulators
Pressure Regulators Mark 908X Piloted Blanketing Regulators Mark 908 Series 3/4" - 1" (DN20 - DN25) Low Pressure Blanketing (Gas overlay) PRV for medium to large Stainless and SUD vessels The Mark 908
XYTRQ X-Series Price List, Notes & Clarifications
Page 1 of 6 TABLE OF CONTENTS Double Acting (DA) Models and Optional Adders Page 2 Spring Return (SR) Models and Optional Adders Page 2 Additional Actuator Options; Page 2 NAMUR Mounting Plate Position
WAYS BALL VALVES WITH ADA ACTUATOR
783-786 3-WAYS BALL VALVES WITH ADA ACTUATOR MAIN CHARACTERISTICS The three-ways flanged ball valve type 783-785 à brides is dedicated to the mixing or deviating functions in process of fluids. With full
Technology for a Better Future. VALVES International Edition.
www.genstartech.com VALVES International Edition (Needle Valve, Metering Valve, Ball Valve, Diaphragm Valve, Gauge Valve, Check Valve, Excess Flow Valve, Relief Valve, Cylinder Valve) Technology for a
FSB 35 Fire-Safe FIRE-SAFE ANTI-STATIC
FSB 35 Fire-Safe 0035 FIRE-SAFE ANTI-STATIC /6/EU SAFETY 2 FSB 35 Strong & Reliable (A) ISO52 Actuator Direct Mount Square stem and twin ISO 52 pattern mounting pad allow for easy actuator installation
Air Operated Stainless Steel V-Ball Control Ball Valve
Type: PA2702V Type: PA2712V Type: PA2722V Pneumatic actuator direct mounted Actuator fitted via mounting kit Actuator fitted via stem extension Pneumatic Actuator features: Rack and pinion construction
M80i ISO Stainless Steel Ball Valve for Sanitary Applications
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
MANUAL & AUTOMATED BALL VALVES
ESTABLISHED 1991 STEALTH VALVE & CONTROLS LTD. The Application Solution Company Exclusive Stocking Distributor for Valves, Actuators, Instruments and Specialty Products Serving: Industrial, Power, Food
Valves, Automation & Controls SERIES 88 HIGH PURITY TUBE FULL PORT 3-PIECE BALL VALVE
Valves, Automation & Controls SERIES 88 I PURITY TUBE ULL PORT 3-PIECE BALL VALVE Design & eatures Body Material 316L Stainless Steel ASME / BPE-2009 Designed specifically for the demanding process requirements
3L/T-2P/Q33 Series 3 Way Ball Valves
3L/T-P/Q33 Series 3 Way Ball Valves A multi-port valve that will lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying
HIGH PERFORMANCE INDUSTRIAL BALL VALVES
Family of Products HIGH PERFORMANCE INDUSTRIAL BALL VALVES CRYOGENIC BALL VALVES SANITARY BALL VALVES ECONOMY VALVES AN ISO 9001:2015 CERTIFIED COMPANY MADE IN THE USA Alloy Valves and Control Flow Measurement
DM4500 Series. Three Piece Direct Mount Ball Valves STANDARDS FEATURES & BENEFITS OPTIONS
DM4500 Series STANDARDS Valve design: ASME B16.34 Material certification: EN10204-3.1 MTR End connections: ASME B16.11, ASME B1.20.1, ASME B16.25 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve
CVS Rack and Pinion Pneumatic Actuator
Instruction Manual CVS Rack and Pinion Pneumatic Actuator Introduction These instructions apply specifically to the CVS Rack and Pinion pneumatic actuator. This manual provides sizing, maintenance, operation,
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
9500 Series Fully Welded Valve Metal to Metal or Soft Seated Ball Valves
STANDARDS API 6D certified ASME / ANSI B26.10 ASME B16.34, NACE NACE MR 0175 compliance API 6FA Double block and bleed Double piston effect available 9500 Series Fully Welded Valve Metal to Metal or Soft
ACM SERIES Pneumatic Actuators
ACM SERIES Pneumatic Actuators ATEX ACHEM Controls Add: North Service Road #., Oakville, Ontario Canada Phone: --34 Cell: 0--004 E-mail: Kevin.armstrong@achemgroup.com www.achemgroup.com Skype: achemkevin
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide 3 Piece Valves Triad Series Models FP/SP-2000/3000 / Valve Sizes: Model FP: 1/4 through 4 Model SP: 3/4
BRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.
195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated
BVM Series Flanged Industrial Control Ball Valves 2 Way 2-1/2-12
The BVM Series of Flanged Industrial Ball Valves are ideally suited to a wide range of steam and water applications that require a high degree of rangeability. These valves provide exceptional characterized