with electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE

Transcription

1 with electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE Electric multiturn actuator capable of high closing pressures Enclosure IP 67 2 torque switches 2 travel switches Handwheel Overheating protection for motor as standard Additional devices available, e.g. potentiometer Explosion proof version available Encased linear thrust unit Page 2 ARI-STEVI 405 / 460 Pneumatic actuator ARI-DP Reversible pneumatic actuator Actuator with rolling diaphragm Air supply pressure max. 6 bar Stem protection by bellow Maintenance-free O-ring sealing Assembly of additional devices acc. to DIN IEC Page 8 Features: Maintenance-free EPDM- and bellows seal Burnished stem Three-ply bellows seal Travel indicator Reducible kvs-values Data sheet englisch (english)

2 ARI-STEVI 405 Electric actuator AUMA SA (MATIC) Stop valve in straightway form with electric actuator AUMA SA (DN ) Figure Nominal pressure Material Nominal diameter PN16 EN-JL1040 DN PN16 EN-JS1049 DN PN N DN PN N DN Other materials and versions on request. Stem sealing Fig. 405: PTFE-packing -10 C to 250 C Pure graphite-packing -10 C to 450 C EPDM-stem sealing 0 C to 130 C Plug design standard: Isolation plug optional: Isolation plug with PTFE soft seat (max. 200 C) Shut off class (seat / plug leakage classes) Metal seat - Leakage class 1 acc. to DIN 3230 T3 / B0 Metal seat / PTFE - Leakage class 1 acc. to DIN 3230 T3 / B0 Closing pressures refer to page 6. Technical data for actuator refer to data sheet.. Selection of possible applications Industrial installations, processing technology, plant manufacturing, etc. (other applications on request) Selection of possible flow media Fig. 405: Cooling water, cooling brine, warm water, hot water, steam, gas, etc. (other flow media on request) Fig

3 Dimensions and weights DN L (mm) (acc. to manufacturers standard) H (mm) Fig. 405 SA 07.5 with LE 25.1 PN16 (kg) PN25-40 (kg) H (mm) SA 10.1 with LE 50.1 PN16 (kg) PN25-40 (kg) H (mm) SA 14.1 with LE 70.1 PN16 (kg) PN25-40 (kg) H (mm) SA 14.5 with LE PN16 (kg) PN25-40 (kg) H (mm) SA 16.1 with LE Standard-flange dimensions refer to page 11. Face-to-face dimension FTF series 1 according to DIN EN ARI-STEVI 405 Electric actuator AUMA SA (MATIC) PN16 (kg) PN25-40 (kg) (For version with AUMA SA Ex other heights.) Parts Pos. Description Fig Fig Fig / Fig Body EN-GJL-250, EN-JL1040 EN-GJS U-LT, EN-JS1049 GP240GH+N, N 1.2 Seat X20Cr13+QT, QT G19 9 Nb Si, Plug * P265GH, S235JR, / G19 9 Nb Si, Straight spin * X10CrNi18-8, Stem * X20Cr13+QT, QT 7 Stuffing box housing P265GH, S235JR, Guide bushing X20Cr13+QT, QT 9 Gasket * Pure graphite (CrNi laminated with graphite) 10 Studs 25CrMo4, Hexagon nuts C35E, Packing ring * PTFE or Pure graphite 14 Washer * X5CrNi18-10, Packing follower * X20Cr13+QT, QT 16 Packing box flange X20Cr13+QT, QT 17 Studs 25CrMo4, Hexagon nuts C35E, * Spare parts Information / restriction of technical rules need to be observed! ARI-Valves of EN-JL1040 are not allowed to be operated in systems acc. to TRD 110. A production allowance acc. to TRB 801 No. 45 exists (acc. to TRB 801 No. 45 EN-JL1040 is not allowed.) The engineer, designing a system or a plant, is responsible for the selection of the correct valve. 3

4 ARI-STEVI 460 Electric actuator AUMA SA (MATIC) Stop valve in straightway form with electric actuator AUMA SA (DN ) Figure Nominal pressure Material Nominal diameter PN16 EN-JL1040 DN PN16 EN-JS1049 DN PN N DN PN N DN Other materials and versions on request. Stem sealing Fig. 460: Stainless steel bellows seal with safety stuffing box -60 C up to +450 C Plug design standard: Isolation plug optional: Isolation plug with PTFE soft seat (max. 200 C) Shut off class (seat / plug leakage classes) Metal seat - Leakage class 1 acc. to DIN 3230 T3 / B0 Metal seat / PTFE - Leakage class 1 acc. to DIN 3230 T3 / B0 Closing pressures refer to page 6. Technical data for actuator refer to data sheet.. Selection of possible applications Industrial installations, processing technology, plant manufacturing, etc. (other applications on request) Selection of possible flow media Fig. 460: Refrigerant, Cooling water, warm water, hot water, thermal oil, steam, gas, etc. (other flow media on request) Fig

5 Dimensions and weights DN L (mm) (acc. to manufacturers standard) H (mm) Fig. 460 SA 07.5 with LE 25.1 PN16 (kg) PN25-40 (kg) H (mm) SA 10.1 with LE 50.1 PN16 (kg) PN25-40 (kg) H (mm) SA 14.1 with LE 70.1 PN16 (kg) PN25-40 (kg) H (mm) SA 14.5 with LE PN16 (kg) PN25-40 (kg) H (mm) SA 16.1 with LE Standard-flange dimensions refer to page 11. Face-to-face dimension FTF series 1 according to DIN EN ARI-STEVI 460 Electric actuator AUMA SA (MATIC) PN16 (kg) PN25-40 (kg) (For version with AUMA SA Ex other heights.) Parts Pos. Description Fig Fig Fig / Fig Body EN-GJL-250, EN-JL1040 EN-GJS U-LT, EN-JS1049 GP240GH+N, N 1.2 Seat X20Cr13+QT, QT G19 9 Nb Si, Plug * P265GH, S235JR, / G19 9 Nb Si, Straight spin * X10CrNi18-8, Guide bushing X20Cr13+QT, QT 9 Gasket * Pure graphite (CrNi laminated with graphite) 10 Studs 25CrMo4, Hexagon nuts C35E, Bellows housing P265GH, / P235GH-TC1, Stem- / Bellows unit * X20Cr13+QT, QT / X6CrNiTi18-10, Gasket * Pure graphite (CrNi laminated with graphite) 20.7 Studs 25CrMo4, Hexagon nuts C35E, Packing ring * PTFE or Pure graphite Packing ring * PTFE or Pure graphite Washer * X5CrNi18-10, Stuffing box housing P250 GH, Studs A Hexagon nuts A Packing follower * X20Cr13+QT, QT Packing box flange X20Cr13+QT, QT 33 Flange P265GH, Studs 25CrMo4, Hexagon nuts C35E, Hexagon socket head screw A Gasket * Pure graphite (CrNi laminated with graphite) * Spare parts Information / restriction of technical rules need to be observed! ARI-Valves of EN-JL1040 are not allowed to be operated in systems acc. to TRD 110. A production allowance acc. to TRB 801 No. 45 exists (acc. to TRB 801 No. 45 EN-JL1040 is not allowed.) The engineer, designing a system or a plant, is responsible for the selection of the correct valve. 5

6 Closing pressures: Electric actuator AUMA SA max. permissible closing pressures on flow-to-open P2 = 0 (Observe regulations, refer to page 11.) DN Seat-Ø (mm) Standard Kvs-values Actuator 1) AUMA SA 07.5 with LE 25.1 Actuator 1) AUMA SA 10.1 with LE 50.1 Actuator 1) AUMA SA 14.1 with LE 70.1 Actuator 1) AUMA SA 14.5 with LE Actuator 1) AUMA SA 16.1 with LE Kvs-value Travel (mm) Closing pressure (bar) I./II./III. 1,4 Torque (Nm) 60 Operating time 2) (s) 41 Output drive (rpm) 22 Closing pressure (bar) I./II./III. 3,3 2,3 2 1,2 Torque (Nm) Operating time 2) (s) Output drive (rpm) Closing pressure (bar) I./II./III. 6,8 4,9 4 2,5 Torque (Nm) Operating time 2) (s) Output drive (rpm) Closing pressure (bar) I./II./III. 15,4 11,2 8,9 5,6 Torque (Nm) Operating time 2) (s) Output drive (rpm) Closing pressure (bar) I./II./III. 27, ,7 10 Torque (Nm) Operating time 2) (s) Output drive (rpm) I. Fig. 405: EPDM-stem sealing; II. Fig. 405: PTFE-/ Pure graphite-packing; III. Fig. 460: Bellows seal 1) Motor voltage: 400V 50Hz 3~ (Other voltages on request) Technical data for actuator refer to price list. 2) Indicated operating times with 50Hz. 6

7 Notes 7

8 Pneumatic actuator ARI-DP Stop valve in straightway form with pneumatic actuator DP (DN300) Figure Nominal pressure Material Nominal diameter / PN16 EN-JL1040 DN / PN16 EN-JS1049 DN / PN N DN / PN N DN300 Other materials and versions on request. Stem sealing Fig. 405: PTFE-packing -10 C to 250 C Pure graphite-packing -10 C to 450 C Fig. 460: EPDM-stem sealing 0 C to 130 C Stainless steel bellows seal with safety stuffing box -60 C up to +450 C Plug design standard: Isolation plug optional: Isolation plug with PTFE soft seat (max. 200 C) Shut off class (seat / plug leakage classes) Metal seat - Leakage class 1 acc. to DIN 3230 T3 / B0 Metal seat / PTFE - Leakage class 1 acc. to DIN 3230 T3 / B0 Closing pressures refer to page 10. Technical data for actuator refer to data sheet.. Fig. 405 Selection of possible applications Industrial installations, processing technology, plant manufacturing, etc. (other applications on request) Selection of possible flow media Fig. 405: Cooling water, cooling brine, warm water, hot water, steam, gas, etc. Fig. 460: Refrigerant, Cooling water, warm water, hot water, thermal oil, steam, gas, etc. (other flow media on request) till valve center DP34T 8 Fig. 460 Top mounted handwheel Actuator DP34 DP34T Ø D1 (mm) 400 H1 (mm) Weight (kg) Technical data for actuator refer to data sheet DP32-34Tri.

9 Dimensions and weights DN 300 Actuator DP 34 DP 34 T L (mm) 850 Ø A (mm) 405 Fig. 405 Fig. 460 H (mm) PN16 (kg) PN25-40 (kg) H (mm) PN16 (kg) PN25-40 (kg) Standard-flange dimensions refer to page 11. Face-to-face dimension FTF series 1 according to DIN EN ARI-STEVI 405 / 460 Pneumatic actuator ARI-DP Parts Pos. Description Fig Fig Fig Fig Fig / Fig Fig / Fig Body EN-GJL-250, EN-JL1040 EN-GJS U-LT, EN-JS1049 GP240GH+N, N 1.2 Seat X20Cr13+QT, QT G19 9 Nb Si, Plug * P265GH, S235JR, / G19 9 Nb Si, Straight spin * X10CrNi18-8, Stem * X20Cr13+QT, QT 7 Stuffing box housing P265GH, S235JR, Guide bushing X20Cr13+QT, QT 9 Gasket * Pure graphite (CrNi laminated with graphite) 10 Studs 25CrMo4, Hexagon nuts C35E, Packing ring * PTFE or Pure graphite 14 Washer * X5CrNi18-10, Packing follower * X20Cr13+QT, QT 16 Packing box flange X20Cr13+QT, QT 17 Studs 25CrMo4, Hexagon nuts C35E, Bellows housing P265GH, / P235GH-TC1, Stem- / Bellows unit * X20Cr13+QT, QT / X6CrNiTi18-10, Gasket * Pure graphite (CrNi laminated with graphite) 20.7 Studs 25CrMo4, Hexagon nuts C35E, Packing ring * PTFE or Pure graphite Packing ring * PTFE or Pure graphite Washer * X5CrNi18-10, Stuffing box housing P250 GH, Studs A Hexagon nuts A Packing follower * X20Cr13+QT, QT Packing box flange X20Cr13+QT, QT 33 Flange P265GH, Studs 25CrMo4, Hexagon nuts C35E, Hexagon socket head screw A Gasket * Pure graphite (CrNi laminated with graphite) * Spare parts Information / restriction of technical rules need to be observed! ARI-Valves of EN-JL1040 are not allowed to be operated in systems acc. to TRD 110. A production allowance acc. to TRB 801 No. 45 exists (acc. to TRB 801 No. 45 EN-JL1040 is not allowed.) The engineer, designing a system or a plant, is responsible for the selection of the correct valve. 9

10 Closing pressures: Pneumatic actuator ARI-DP max. permissible closing pressures on flow-to-open P2 = 0 (Observe regulations, refer to page 11.) Spring opens on air failure DN 300 Seat-Ø (mm) 301 Standard Kvs-values Kvs-value 1635 Travel (mm) 75 Actuator DP 34 Actuator DP 34 T Air supply pressure min. (bar) 4 I./II./III. 1,3 5 I./II./III. 2,4 6 I./II./III. 3,4 3 I./II./III. 2,2 4 I./II./III. 4,3 5 I./II./III. 6,4 6 I./II./III. 8,5 I. Fig. 405: EPDM-stem sealing; II. Fig. 460: PTFE-/ Pure graphite-packing; III. Fig. 460: Bellows seal Air supply pressure max. of pneumatic actuators DP: max. permissible 6 bar 10

11 Flange dimensions / Pressure-temperature-ratings Standard-flange dimensions Flanges acc. to DIN EN /-2 (Flangeholes / -thickness tol. acc. To DIN 2533/2544/2545) DN PN16 ØD (mm) PN16 ØK (mm) PN16 n x Ød (mm) 12 x x PN25 ØD (mm) PN25 ØK (mm) PN25 n x Ød (mm) 16 x x x x 36 PN40 ØD (mm) PN40 ØK (mm) PN40 n x Ød (mm) 16 x x x x 42 Pressure-temperature-ratings acc. to DIN EN Material -60 C to <-10 C * -10 C to 120 C 150 C 200 C 250 C 300 C 350 C 400 C 450 C EN-JL1040 PN16 (bar) ,4 12,8 11,2 9, EN-JS1049 PN16 (bar) on request 16 15,5 14,7 13,9 12,8 11, Pressure-temperature-ratings acc. to DIN EN Material -60 C to <-10 C * -10 C to 50 C 100 C 150 C 200 C 250 C 300 C 350 C 400 C 450 C N PN25 (bar) 18, ,3 21,7 19,4 17,8 16, ,4 13, N PN40 (bar) ,3 34,7 30,2 28,4 25, ,1 22,2 Intermediate values for max. permissible operational pressures can be determined by linear interpolation of the given temperature / pressure chart. * Valve with extended bonnet, studs and nuts made of A4-70 (at temperatures below -10 C) Please indicate when ordering - Figure-No. - Nominal diameter - Nominal pressure - Body material - Plug design - Kvs-value - Stem sealing - Actuator - Special design / accessories Example: Figure ; nominal diameter DN 300; nominal pressure PN 40; body material N; isolation plug; Kvs 301, Open/Close, EPDM stem sealing; AUMA SA 10.1 Dimensions in mm Weights in kg Pressures in barg (gauge) 1 bar ^= 10 5 Pa ^= 0,1 MPa Kvs in m 3 /h 11

12 Constructions Stem sealing PTFE-/ Pure graphite-packing Pos. Description 16 Packing box flange X20Cr13+QT, QT 17 Studs 25CrMo4, Hexagon nuts C35E, Stem guiding * X20Cr13+QT, QT 24 Sealing ring * EPDM O-ring EPDM Strip * PTFE 27 Scraper * NBR * Spare part EPDM-stem sealing Plug designs Bellows seal with safety stuffing box Isolation plug... also with other actuators: (on request) Isolation plug with PTFE soft seat with pneumatic actuators with hydraulic actuators with other electric actuators Technology for the Future. G E R M A N Q U A L I T Y V A L V E S ARI-Armaturen Albert Richter GmbH & Co. KG, D Schloß Holte-Stukenbrock, Tel / 994-0, Telefax / or 159 Internet: info.vertrieb@ari-armaturen.com 12