The GACHOT V501 gate valve offer the most possible reliability for process and critical applications
|
|
|
- Julia Melanie Johns
- 5 years ago
- Views:
Transcription
1 The GACHOT V501 gate valve offer the most possible reliability for process and critical applications Features Construction complies with NF EN 1984 Straight-through flow and full port Cast body (investment casting) Double stainless steel gate, perfect tightness Non-rotating and rising stem with rolled thread and back seat protecting the stuffing box in position and ensuring the repacking under pressure Stem Threading outside of the carried fluid Heat treated yoke sleeve (Sulfinuz process) avoiding seizing Low pressure drop High service reliability Perfect tightness in both flow directions Easy operation, low operating torque Very low carbon content stainless steel Excellent corrosion resistance Bolted gland and bonnet Encapsulated bonnet gasket and everlasting gland packing made of PTFE ensuring a permanent sealing Replaceable seats ensuring the interchangeability Position Indicator Applications Resin, Latex, Polymers, Slurry, Fluid with particles, Liquid sulphur, Phosgene gas, High velocity steam, Cryogenic, High temperature, Vacuum Characteristics Sizes (mm) : DN08 to DN150 Temperature ( C) : -50 to +250 Pressure (bar) : PN100 to PN20 Connections DN08 to DN25 : BSPP / NPT / BW (union ring) / SW DN10 to DN150 : Flanged PN16-40 / Class 150 / Class Tyco reserves the right to change the contents without notice GACCH-0027-EN-0708
2 Parts identification DN08/25 Packing detail Seat / wedge detail Parts list Item Qty Description Material 1 1 Body Stainless steel Gate Stainless steel Seat Stainless steel Seat gasket PTFE 5 1 Stem Stainless steel Flange Carbon steel A Body gasket PTFE 8 1 Bonnet Stainless steel Gland stud A Packing PTFE 11 1 Gland packing Stainless steel Gland stud A Bolting A Bolting A Friction washer CELORON 16 1 Nut Stainless steel (SULFINUZE) 17 1 Handwheel nut Stainless steel Handwheel Cast Iron Options Stellite gr.12 seats Stellite gr.6 gates Graphite body seal and packing Stainless steel flanges Pneumatic/electric actuator Limit switches Locking device Tyco reserves the right to change the contents without notice page 2
3 Dimensions DN08/25 SW ends BSPP ends 4 holes øe on øc BW Union ring ends Dimensions - Flanged ends PN 40 Class 150 Class 300 Mass DN P d2 J F' V A B S E C D A B S E C D A B S E C D (Kg) ,8 60, , ,8 66, ,8 69, , , ,8 79, , , Note: Flange finish Ra 6. Dimensions - Welded ends and Screwed ends Socket or screwed Union ring (BW) SW BSPP NPT Weight Weight DN A d1 E R** E G E G (Kg) A L d3xd1 (Kg) /4'' /4'' x /8'' /8'' x /2'' /2'' x /4'' /4'' x * 40* '' '' x33 1 * For SW d1=42 and A=117.5 ** Allowance +0.8/0 Tyco reserves the right to change the contents without notice page 3
4 Parts identification DN32/150 Parts list Item Qty Description Material 1 1 Body Stainless steel Gate Stainless steel Seat Stainless steel Seat gasket PTFE 5 1 Stem Stainless steel Flange Carbon steel A Body gasket PTFE 8 1 Bonnet Stainless steel * Screw H M8x25 A Packing PTFE 11 1 Gland packing Stainless steel Gland stud A Bolting H M8 A Pin ISO8752-6x30 Stainless steel Stem guide Stainless steel Nut Stainless steel (SULFINUZE) 17 1 Disc Key 5x19 Stainless steel XC Friction washer CELORON 19 1 Handwheel nut Stainless steel Handwheel Stainless steel AISI 304 * Qty's according to valve diameter Options Stellite gr.12 seats Stellite gr.6 gates Graphite body seal and packing Stainless steel flanges Pneumatic/electric actuator Limit switches Locking device Tyco reserves the right to change the contents without notice page 4
5 Dimensions DN32/150 DN DN N holes øe on øc N holes øe on øc Dimensions Weight DN F d2 N F' V A B S E C D (Kg) PN Flanged ends - PN16 / PN , , , , , , , Flanged ends - Class On request , ,8 98, , , , , On request 16, , , , , On request , ,2 241, Flanged ends - Class On request , , , ,2 30, , On request 16, , , , On request ,5 38, Tyco reserves the right to change the contents without notice page 5
6 V501 Gate valve Dimensions with heating jacket Parts list Item Qty Description Material 1 1 Heating jacket Stainless steel Union ring Stainless steel Dimensions DN X 2,5 3,5 3, Y Z BW end Pressure ratings (bar) DN Service Test Options Heating jacket with flange connection Reinforced heating jacket for higher pressure Oversized flanges Tyco reserves the right to change the contents without notice page 6
7 Notes For flanged valves, the maximum operating pressure has to be limited according to the lowest value between body rating and flange rating For BW valves, pressure has to be limited according to union-ring PN: - PN63 for DN08 - PN40 for DN12 and DN15 - PN25 for DN20 and DN25 Pressure/temperature ratings DN08 - DN25 Limit for valves with PTFE gaskets and standard seating face Graphoil gaskets and packing and stellite seating face Bar C Pressure/temperature ratings DN32 - DN150 Limit for valves with PTFE gaskets and standard seating face DN32 DN40 DN50 DN65 to 100 DN125 to 150 Bar Graphoil gaskets and packing and stellite seating face C Cv / Kv DN Cv Kv Testing All valves are tested according to NF EN and ISO 5208 Hydrostatic shell test: 1.5 MOP No visible leakage Pneumatic test: 6 bar No visible leakage Tyco reserves the right to change the contents without notice page 7
Gachot Ball Valve Type V16 carbon steel / reduced bore / DN 8 to DN 200
carbon steel / reduced bore / DN 8 to DN 200 Three-piece ball valve featuring a unique design for easy and fast maintenance Features pplications Saturated steam. mmonia, natural gas, propane and utilities.
GACHOT TYPE V16 BALL VALVES CARBON STEEL / FULL BORE / DN 8 TO DN 150
CRBON STEEL / FULL BORE / DN 8 TO DN 150 Carbon steel, forged body full bore ball valve designed to international and European standards FETURES PPLICTIONS Saturated steam. mmonia, natural gas, propane
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400
SPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
KO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon
SPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested
arflu globe valves The quality you can trust Globe valves Because of their configuration,
The quality you can trust globe valves 2 18 Globe valves Because of their configuration, globe valves are perfect to regulate or limit the fluid port. epending on the needs of the system, design or open
SEVERE SERVICE BELLOWS SEALED VALVES EURO CHLOR TYPE 350EC.4-5
SEVERE SERVICE BELLOWS SEALED VALVES EURO CHLOR TYPE 350EC.4-5 PHÖNIX Armaturen-Werke Bregel GmbH P +49 (5693) 988-0 F +49 (5693) 988-140 info@phoenix-armaturen.de www.phoenix-armaturen.de BELLOWS SEALED
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460
FORGED HIGH PRESSURE BONNETLESS. ASME CLASSES: Sizes: 1 2 4" ( mm) U.S. Patent # Patented Easy Maintenance!
FORGED HIGH PRESSURE BONNETLESS ASME CLASSES: 1690 4500 Sizes: 1 2 4" (15 100 mm) U.S. Patent # 4356832 Patented Easy Maintenance! PROFILE Velan is one of the world's leading manufacturers of industrial
UREA SERVICE FORGED VALVES
UREA SERVICE FORGED VALVES 288 UREA SERVICE VALVES 289 UREAvalves DROP CHECK VALVE UREA SERVICE PN325 1/2 to 2 DOUGLAS CHERO DROP CHECK VALVE UREA SERVICE DROP CHECK VALVE UREA SERVICE PN325 : PN325 Drop
R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition
of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off
Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50
Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60
Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Type K03. Gate Valve Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / together we are strong
PN 16 100 Gate Valve Butt-Welded, Flanged Data Sheet Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, 143 00 Praha 4, CZ T: +420 225 371 300, F: +420 225 371 325 E: info@mpowergroup.eu,
WEDGE & SLAB GATE VALVES
GW & GS Series GATE VALVES WEDGE & SLAB GATE VALVES PROCESS VALVES WEDGE GATE AND SLAB GATE VALVES FOR SPECIAL APPLICATIONS Wedge gate Valves Code: GW2M Hand wheel for small sizes Large size valves have
Double Offset Butterfly Valve
General Applications Airport Refuelling Hydrocarbon Processing HVA hemical Processing Purified Gas Steam & Vacuum Services Potable Water Variations of Sealing PTFE - Teflon with glass Metal/Metal Fire
Triple Eccentric Control and Shut-off Butterfly Valve Series 14t
Application: Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Triple eccentric butterfly valve providing excellent shut-off in all industrial applications: Nominal size DN 80 to DN 400
METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW
METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW Neles BW series metal seated high performance butterfly valve with one piece body design, for both control and tight shut-off applications. Multiple
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
YARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000
Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating
ARI-FABA -ANSI LongLife Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
K-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180
SERIES 180 R180/R180F Reduced Bore Design F180/F180F Full Bore Design FEATURES Ball valve designs with screwed or weld end connections. ISO 5211 top mounting plate for easy actuation. Investment cast body
KNIFE GATE VALVES -- MODEL D
PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
RAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.
Fig. 6022-6025 RAIMONDI High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Features Forged body materials of highest quality, all in compliance with ASME
Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
CE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
SPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½" to 8"
SPIRA-TROL Two-port Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME standard. These valves are available in three body materials in sizes
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN 63-160, DN 50 150, T max : 550 C Shut-off globe valve (series V30) or shut-off globe valve with control
FASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN
A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves
The bolted bonnet configuration achieves simultaneously the best performance and the highest safety.
The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always
CONTROL VALVES EURO CHLOR
CONTROL VALVES EURO CHLOR PHÖNIX Armaturen-Werke Bregel GmbH P +49 (5693) 988-0 F +49 (5693) 988-140 info@phoenix-armaturen.de www.phoenix-armaturen.de APPLICATIONS & DESIGN FEATURES FIG. NO. 350EC8-9
BALL SECTOR VALVE of stainless steel 455 series
C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and crystallizing
Hattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
Series 30,000 Rotary Process Valve. Technical data API 609, DIN 3840.
Series 30,000 Rotary Process Valve The outstanding performance of triple offset, metal seated Vanessa Series 30,000 valve is the ideal solution to achieve perfect shutoff in any process. Features Torque
HANCOCK 600 GATE, GLOBE AND CHECK VALVES FORGED STEEL
HANCOCK 600 GATE, GLOBE AND CHECK VALVES A range of ASME class 800 and 1500 reduced bore forged steel valves with screwed, socket weld, butt weld or flanged ends GATE VALVES A compact but extremely sturdy
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
PARCOL SERIES CONTROL VALVES
PAROL -9 SERIES ONTROL VALVES PAROL -9 SERIES ONTROL VALVES The line of PAROL -9 series control valves provides the most versatile globe body type single seat available with heavy top guiding design.
Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
WAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
Compact Expanding Gate. Double Disc Parallel Slide ORION STEEL VALVES API 6D API 600
ORION STEEL VALVES Compact Expanding Gate API 6D Double Disc Parallel Slide API 600 PARALLEL SLIDE COMPACT EXPANDING GATE API 6D - DOUBLE DISC PARALLEL SLIDE API 600 - p. 155 Class ASME 150 (PN 20) 300
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (69 bar) at 00 (37 ) Temperature Range from -0 (-8 ) to 50 (3 ) TESTING Each valve is
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
PRODUCT EVOLUTION. Be careful, our valves Ref.702 are changing
PRODUCT EVOLUTION Be careful, our valves Ref.702 are changing We currently have 2 different types available (according to DN) with different dimension and non-commutable gaskets Old marking : New marking
Gate valve S38 PN , DN , T max : 540 C
Gate valve S38 40-100, DN 40 400, T max : 540 C Shut off gate valve with outsidescrew, rising stem, non-rising hand wheel, with bolted bonnet, with flanges or with butt weld ends, flexible or split wedge,
M10F Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Series 2003 / Three-way control valve. Features. Wörth am Main
Series 2003 / 2013 Three-way control valve SPECIFICATION The Series 2003 / 2013 comprises a range of skirt guided Three-way mixing (2003) and diverting valves (2013). Available in a variety of sizes, they
KNIFE GATE VALVES -- MODEL A
PRODUCT DESCRIPTION Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. Several seat
SQUARE PORT KNIFE GATE VALVE
SQUARE PORT KNIFE GATE VALVE The model knife gate is a square port low-pressure valve for highly solid loaded fluids or solids, mainly used in bulk handling and silo outlet applications in industries such
Ball Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
BUTTERFLY VALVE ST BUTTERFLY VALVE VALVES - 31
BUTTERFLY VALVE ST BUTTERFLY VALVE REVREV 6.2 6.2 / Nov. / Nov. 2017 2017 VALVES - 31 High Performance Butterfly Valve STHW STHL Size : 2 ~ 24 Type: Wafer, Lug Pressure Rating: Class 150, 300 Body Material:
Gasket
CAST STAINLESS STEEL GATE VALVES API 603 INTEGRAL SEAT, 1 2 1 1 2", (15 40 mm) CLASS 800 GATE VALVES FULL PORT 1 2 1 1 2", (15 40 mm) THREAE OR SOCKET WEL, ASME CLASS 800 Precision High Quality Investment
Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel ASTM A351 CF8M. Certificate 3.1
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 mm Flanges R.F. PN40-30 C + 220 C Max Pressure : 40 Bars Specifications : Antistatic device ISO 5211 mounting pad Anti blow-out stem Fully
M21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
BALL SECTOR VALVE of stainless steel 455 (459) series
Operation C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
GATE VALVES S 38 APPLICATION
APPLICATION The gate valves of this design are controlled valves used as the shut-off units in the piping system. They can be used for water, saturated and superheated steam, gases, non-aggressive liquids,
VB VALVES & AUTOMATION
Introduction to Valve What are Valves? Valves are mechanical device that controls the flow and pressure within a system or process. They are essential components of a piping system that conveys liquids,
Standard Duty A.T.-Temp Desuperheater for cryogenic processes
Narvik-Yarway covers requirements for desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power, pulp & paper industry
Series Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features
Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features General application Designed for ASME boiler and pressure vessel code, section I applications
Sempell High Pressure Stop Valves Model VA510 (DIN)
Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 50 mm Threaded BSP or NPT, S.W. or B.W. -30 C in SS and -20 C in carbon steel + 220 C Max Pressure : 100 to 140 Bars Specifications : Antistatic
DEWRANCE. Check Valve Bled Steam
Check Valve Bled Steam DEWRANCE Features & Benefits Excellent Reliability - Internal Counterweight to balance disc under low load conditions - Direct deposited seats - Tilting disc design for quick closing
R o L. WAFER PATTERN V-PORT BALL VALVE stainless steel 465 series SILVER LINE. Operation. Description. Edition
Operation WAFER PATTERN V-PORT BALL VALVE stainless steel C ont R o L Description Edition Högfors ball sector valve series 465 is specially designed for control applications of various medium like liquids,
UNIDIRECTIONAL Round Guillotine Damper
28/02/2012 UNIDIRECTIONAL Round Guillotine Damper Gas valve, with round damper design. Unidirectional guillotine damper. Various seat and packing materials available. Face to face distance in accordance
HANCOCK GATE, GLOBE AND CHECK VALVES CAST STEEL
ANCOCK GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal
HIGH TEMPERATURE HIGH PRESSURE CONTROL VALVES SERIES
HIGH TEMPERATURE HIGH PRESSURE CONTROL VALVES 1-4470 SERIES - 2 - DESCRIPTION HIGH TEMPERATURE HIGH PRESSURE CONTROL VALVES 1-4470 SERIES Parcol 1-4470 High Temperature High Pressure Control Valves represent
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and
WAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
IN-LINE DISC & PISTON VALVES
ID & IP Series IN-LINE DISC & PISTON VALVES PROCESS VALVES IN-LINE DISC & PISTON VALVES M Seal In-Line Piston Valve Code: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded
Sempell Dewrance Check valves Bled steam
Features General application The Dewrance bled steam check valve has been designed specifically for use on power generation steam turbines for extraction and cold reheat applications where reliable non-return
Single Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
KVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
Rate B standard. Rate A Rate A option. max +260 C/ min -40 C
of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off
Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
Balanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
Bronze Gate Valves. SECTION 2a. Tel: +44 (0) Fax: +44 (0)
SETION 2a ronze Gate Valves Tel: +44 (0)1695 712800 Fax: +44 (0)1695 712820 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents ronze Gate Valves ontents Page Figure Number Index
Balanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
NELES HIGH CAPACITY TRIPLE ECCENTRIC DISC VALVE, METAL SEATED NELDISC SERIES L6
NELES HIGH CAPACITY TRIPLE ECCENTRIC DISC ALE, METAL SEATED NELDISC SERIES L6 Metso's Neles series L6 is a double flanged metal seated Neldisc triple eccentric disc valve with one piece body design, for
BUTTERFLY VALVE WAFER TYPE of carbon steel ( ) series
Operation WAFER TYPE of carbon steel 1100 (1000-100) series C ont R o L Operation Edition 0-0-009 Wafer type butterfly valve 1100 (1000 100) series is used in industrial pipelines for demanding on-off
H i g h P r e s s u r e V a l v e
High Pressure Valve HIGH PRESSURE VALVES Applications & Specifications Range Gate Valve Advantages STRACK has designed and manufactured high pressure valves for over 35 years. Currently more than 3000
Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
Balanced and Multi-stage Trim Options for Spira-trol TM Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
with the specific application. Always read and understand the installation
Worldwide Contacts www.tyco-fire.com Resilient-Seated Gate Valves Outside Screw and Yoke General Description TYCO Resilient-Seated Gate Valves are used in Fire Protection Systems for on/off operation.
CONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change
Technical data Pressure (bar) : 10 Temperature ( C) : Sizes (mm) : Flange accommodation : DIN PN 10/(16)
50 300 mm wafer and lugged lined butterfly valves - Coilspring shaft sealing A PTFE lined solution according ISO 5752/5 short (EN 558-1/T5) with various corrosion resistant disc materials to satisfy demanding