MTC Series. Double Acting and Spring Return Actuator and Accessories. MasterTorq. Pneumatic Actuators. Atex Class 2
|
|
|
- Laurence Shaw
- 6 years ago
- Views:
Transcription
1 Double Acting and Spring Return Actuator and Accessories MTC Series TM Pneumatic Actuators Atex Class
2 Operations Double Acting A B A B By supplying air to Port A, pressure is applied to the center chamber and forces the dual pistons outward. Linear piston force is transferred via gear racks to the pinion gear, causing the pinion to turn counterclockwise while the air is being exhausted from Port B. By supplying air to Port B, pressure is applied to the outside chamber and drives the dual pistons inward. The action causes the pinion to turn clockwise while the air is being exhausted from Port A. Spring Return (Fail clockwise shown) A B A B By supplying air to Port A, pressure is applied to the center chamber, forcing the dual pistons outward, compressing the springs in the outside chambers to produce a counterclockwise rotation. Exhaust air exits at Port B. Upon loss of air pressure, the stored energy in the compressed springs forces the pistons inwards producing rotary motion with exhaust air exiting at Port A. This "fail safe" position is held by spring force until air pressure reapplied to Port A. Installation of Springs for Spring Return Actuator Springs Springs Springs Springs Springs 0 Springs Springs Springs Even spring set is recommended for high cycle application.
3 Materials of Construction (Optional) No. Part Description Qty. Material No. Description Qty. Material Indicator Cap Screw Plastic / Stainless Steel Spring (Cartridge) 0~ High Alloy Spring Steel Position Indicator Plastic (ABS) Bearing (Piston) 3 Pinion Snap Ring O-ring (Piston) 4 Thrust Washer Piston Die-Casting Aluminum Thrust Bearing Plug Body Extruded Aluminum Alloy 0 O-ring (Adjust Screw) Piston Guide Stop Nut (Adjust Screw) O-ring (Pinion Top) Adjust Screw Bearing (Pinion Top) 3 Stop Screw 0 Inside Washer 4 Nut (Stop Screw) Cam Alloy Steel* O-ring ( Cap) Pinion (Drive Shaft) S.S. 300 Series / Nickel Plated Alloy* Cap Die-Casting Aluminum 3 Bearing (Pinion Bottom) Cap Screw 4 O-ring (Pinion Bottom) Shaft Adapter Sintered Metal * Stainless steel for model DA/SR03 and smaller only. 3
4 Dimensions NAMUR PINION DETAIL K V MODEL C-DA40, DA/SR0-0 C-DA/SR0-0 V M x 0.3 NAMUR J ØD M E H G F L A C B U T M 4xS /"-NPT /4"-NPT M x M x /4" NAMUR /" NAMUR 4 x R MODEL: C-DA/SR-0 M Unit: inch Model A B C D E F G H J K L M R S T U MTC-DA M x M x 0 F03/.4 F0/. MTC-DA/SR M x M x 0 F03/.4 F0/. MTC-DA/SR M x 0 M x 3 F0/. F0/. MTC-DA/SR M x 0 M x 3 F0/. F0/. MTC-DA/SR M x 0 M x 3 F0/. F0/. MTC-DA/SR M x 0 M x 3 F0/. F0/. MTC-DA/SR M x 3 M0 x F0/. F0/4.0 MTC-DA/SR M x 3 M0 x F0/. F0/4.0 MTC-DA/SR M0 x M x 0 F0/4.0 F/4. MTC-DA/SR M0 x M x 0 F0/4.0 F/4. MTC-DA/SR ,..4 M x F4/. MTC-DA/SR M x F4/. MTC-DA/SR ,.. M0 x F/.4 MTC-DA/SR M0 x F/.4 4
5 Technical Data Spring Return Actuators Output Torque (lbf-in) Output Air to Spring Air Pressure (PSI) Spring 0 0 Actuator Type o o No. MTC-SR MTC-SR3 MTC-SR MTC-SR3 MTC-SR MTC-SR Operating Conditions Operating Media: Dry and lubricated air, or non-corrosive gas. The maximum particle diameter must be less than 30 μm. Air Supply Pressure: The minimum supply pressure is 3 psig. The maximum supply pressure is 0 psig Spring Return Output Operating Temperature: Standard (NBR O-ring): -4 o F to o F. Low Temperature (Silicone O-ring): -3 F to o F. High Temperature (Viton O-ring): o F to 30 F. Premium Range (HNBR O-Ring): -4 F to F Stroke Adjustment: Pinion stops allow ± o adjustment at and
6 Spring Return Actuators Output Torque (lbf-in) Spring Return output Output Air to Spring MTC-SR MTC-SR40 MTC-SR0 MTC-SR0 MTC-SR0 MTC-SR40 MTC-SR0 Spring No. Actuator Type 40 Air Pressure (PSI) Technical Data
7 Technical Data Double Acting Actuators Output Torque (lbf-in) MODEL Air Pressure (Psig) MTC-DA40 MTC-DA MTC-DA Double Acting Torque Curve MTC-DA MTC-DA3 MTC-DA MTC-DA0 MTC-DAI Torque 0 0 MTC-DA MTC-DA MTC-DAI MTC-DA MTC-DA40 MTC-DA Spring Return Torque Curve Weight (lbs) MODEL MTC-DA MTC-SR Maximum Air Consumption (cu. inches) Per Stroke Model Action CCW CW Actuator Cycle Speed (sec.) Action Model CCW CW DA SR DA SR Torque Air Stroke 0 0 Torque Spring Stroke 0 0 Interface Specification Drive and Flange to ISO configuration for easy direct mount onto a valve or connection with standardized mounting hardware. The NAMUR Drive Pinion and NAMUR top mounting connection for direct installation of accessories such as Limit Switch and Positioner. Air supply connection is designed in accordance with NAMUR Standard to install solenoid valve.
8 Quality Assurance All actuators are manufactured in a registered ISO facility All actuators are 00% inspected and tested in factory Each actuator is marked with a unique serial number for full traceability. can also provide valve automation accessories, including Limit Switches, Positioners, Solenoid Valves, and Mounting Hardware. Torque Range at 0 Psig Air Pressure: Double Acting: -,00 lbf-in Spring Return: 0 -,00 lbf-in Cycle Life: up to million cycles Other Series of Actuators B Series Actuator Aluminum Body, s, Wide Range of Selection Model B-DA3-400, SR4-400 Torque: up to 000 lbf-in for DA 300 lbf-in for SR Represented by: Pneumatic Actuators TM info@mastertorq.com This catalog is not contractual and may be amended without notice.
C Series Pneumatic Rack & Pinion Rotary Actuators
Allied Flow Controls, Inc. C Series Pneumatic Rack & Pinion Rotary Actuators Spring Return & Double Acting Features and Benefits Torque Range at 0 Psig Air Pressure: Double Acting: -,00 lbf-in Spring Return:
ACM SERIES Pneumatic Actuators
ACM SERIES Pneumatic Actuators ATEX ACHEM Controls Add: North Service Road #., Oakville, Ontario Canada Phone: --34 Cell: 0--004 E-mail: Kevin.armstrong@achemgroup.com www.achemgroup.com Skype: achemkevin
L J H F
Tech Bulletin Page 36-12 Page 1 2PC DIRECT-MOUNT AUTOMATION SERIES Flanged End DMF15 Econoflo Series Valve Features 2-Piece Body, Full Port Design 1/2 to 4 Sizes ANSI Class 150 Flanged Ends Body: CF8M,
Open And Closed Locking Device for Positional Safety Lockout. Simplify All Aspects of Piping Systems with Flo-Tite s Multiport Ball Valves
FLO TITEE valves & controls TM Tech Bulletin Page 90-11 3 & 4 Way Multi-Port Ball Valves MULTI-PORT SERIES Extremely Versatile Valve Design for Diversion or Mixing Models: Flanged End ANSI/Class 150 MPF15
Pneumatic Rack & Pinion AC-SERIES ACTUATOR
Pneumatic Rack & Pinion AC-SERIES ACTUATOR TABLE OF CONTENTS Design Features Operating Principle Parts & Materials Dimensions Torque Sheets Spring Options Measurements Sizes & How to Order 1 2 3 4 8 10
aero 2 -IOM aero 2 ACTUATOR - INSTALLATION, OPERATION & MAINTENANCE MANUAL
Instruction DP00226 May 2015 IMPORTANT SAFETY WARNINGS A. Before carrying out any repair or maintenance on the actuator, make sure that the pressure supply lines and electrical connections have been safely
brochure PN
brochure PN-2013-01 www.bitorq.com/pneumatic.html Pneumatic Actuators PAGES 4-11 ON THE WEB AT BITORQ.COM/PNEUMATIC_PN.HTML COMPACT, RELIABLE DESIGN OPEN-CLOSED ADJUSTMENT STOPS DOUBLE ACTING AND SPRING
aero2 Pneumatic Actuator
The pneumatic rack & pinion actuator is manufactured using the latest materials and methods to provide dependable and smooth operation in demanding process control conditions. aero2 DESIGN FEATURES Hard
DA/SR. Pneumatic Rotary Actuators FEATURES VALBIA ISO 9001 CERTIFIED
VALBIA ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
CATALOGUE+PRICELIST ALUMINIUM ROTARY ACTUATORS SERIES AC-A 0-90 ACG AUTOMATION CENTER GERMANY GMBH & CO. KG
CATALOGUE+PRICELIST 2.011 ALUMINIUM ROTARY ACTUATORS SERIES AC-A 0-90 DESIGN AND STRUCTURE Design and structure Our newly-designed AC-A Series Pneumatic Actuator is aluminum rack & pinion actuators in
UT SERIES PNEUMATIC ROTARY ACTUATORS
UT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
PNEUMATIC QUARTER TURN RACK & PINION ACTUATOR MODEL - HP
FEATURES AND BENEFITS Aluminium body, hard anodized, internally polished to 45-50µ and Nickel plated to protect against wear and corrosion Open/Closed indicator is standard on all models Travel adjustment
APS SERIES. Air Pump Shut Off Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS APS SERIES APS-DBV-4FP 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com A0SR Standard Features Indicator A position indicator
MT SERIES PNEUMATIC ROTARY ACTUATORS
MT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
Pneumatic Actuators. 1. DIE CAST ALUMINUM END CAPS: standard polyester powder coated
4 5 Pneumatic s 1 2 6 NOMINAL VALUES: Pressure rating max 115 PSI Temperature range: standard (-4 F;+185 F), high (-4 F;+302 F), low (-40 F;+185 F) Pre lubricated for life of actuator at assembly 100%
Pneumatic Rotary Actuators
ALEDER ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
UT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series. A full range of double acting and spring return actuators designed
UT-**-DA Series UT-**-SR Series A full range of double acting and spring return actuators designed to NAMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual
CVS Rack and Pinion Pneumatic Actuator
Instruction Manual CVS Rack and Pinion Pneumatic Actuator Introduction These instructions apply specifically to the CVS Rack and Pinion pneumatic actuator. This manual provides sizing, maintenance, operation,
Figure RP ACTUATORS PNEUMATIC RACK & PINION.
Figure RP ACTUATORS PNEUMATIC RACK & PINION www.fnw.com TORQUE RANGES The RP rack and pinion actuators are available with output torques ranging from 44 to 36,269 in-lbs depending on air supply pressure
AP SERIES ATEX NEMA 4,4X AIRPOWER PNEUMATIC ACTUATOR FEATURES
ISO 001 AP SERIES FEATURES Our newly designed D Series Pneumatic Actuator is available in double-acting and spring-return based on our innovative and patented technology. Features a top mount multi-function
R-type, RY-type EPR-Series. Actuators for Quarter-Turn Valves
R-type, RY-type EPR-Series Actuators for Quarter-Turn Valves >> Introduction The EPR-Series pneumatic actuator provides a rugged solution for quarter-turn actuation while reducing maintenance requirements.
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested
Pneumatic Rack & Pinion Actuator
Pneumatic Rack & Pinion Actuator 4120 N.E. Columbia Blvd. Portland Oregon USA 97211 Phone: 503-287-8383 Fax: 503-281-9677 www.fnwvalve.com STANDARD FEATURES Torque output range from 40 to 32,315 inch-pounds
Smart Solutions. Powerful Products. PNEUMATIC ACTUATOR SERIES 227
Smart Solutions. Powerful Products. PNEUMATIC ACTUATOR SERIES 227 Features and Benefits Thirteen Sizes Rack and Pinion Design Double Acting and Spring Return Break and Seat Combinations Multiple spring
Keystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area
The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with
BULLTIN B PISTON ACTUATOR. The Actuator that Delivers Maximum Torque for Minimum Air Consumption
BULLTIN B60 PISTON ACTUATOR The Actuator that Delivers Maximum Torque for Minimum Air Consumption TABLE OF CONTENTS: COMPACT DESIGN PRINCIPLE OF OPERATION PARTS LIST MAIN FEATURES TORQUEMETRIC TORQUEIMPERIAL
SOCLA pneumatic actuator
Summary Sales leaflet p.2 Technical description p.3 Dimension p.4 Interfaces p.5-8 Applications and main characteristics Objective : Socla pneumatic actuators are designed to meet the demanding needs of
SPN II. S h a r p e T o l l Free (877) F a x (708)
SPN II S h a r p e T o l l Free (877) 774-2773 F a x (708) 562-9250 www.sharpevalves.com 1 SPN II Pneumatic Actuator Rack & pinion design The standard actuator configuration has hard anodized aluminum
SPN II Pneumatic Actuator
SPN II Pneumatic Actuator Rack & pinion design The standard actuator configuration has an epoxy coated, hard anodized aluminum body and epoxy coated end caps Inside surface finish (Ra 0.4-0.6µm) to minimize
Pneumatic actuator. Inspired By Challenge
Inspired By Challenge Actuation COMPACT actuator ESD system Interfaces Ordering code system Introduction Proven advantage The COMPACT actuator is a quarter-turn rack & pinion pneumatic actuator that doubles
Pneumatic Actuators New AD and AS (Sizes 0025 to 0350)
Pneumatic Actuators New AD and AS (Sizes 0025 to 0350) APOLLO RACK & PINION Designed and manufactured for the ultimate in durability and reliability, the new Apollo Pneumatic Rack & Pinion Actuators provide
Pneumatic actuator. Inspired By Challenge
Inspired By Challenge Actuation COMPACT actuator ESD system Interfaces Ordering code system Introduction Proven advantage The COMPACT actuator is a quarter-turn rack & pinion pneumatic actuator that doubles
Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators
Product Data Sheet October 2016 EF.00.00.EN Rev. 7 EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators High quality and economical actuator Improve plant and operator safety Reliable and flexible in
Tri-Pro Series. Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 psi 1/4-3/ psi 1-4
flo TITEE valves & controls TM Tech Bulletin Page 51A-13 3pc High Performance Fire Safe Valves Tri-Pro Series Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 psi 1/4-3/4 2250
PNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design Single acting type PE Available from size12 up to 350 Double acting type PD Available from size12 up to 350 Old design Single acting type PE Available from size 600 up to 000 Soon
PNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design (El-O-Matic type F) Single acting type PE (+ PD up to 100) Available from size12 up to 600 Double acting type PD Available in size 150 up to 600 Old design (El-O-Matic type E) Single
PNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design (El-O-Matic type F) Single acting type PE (+ PD up to 100) Available from size12 up to 600 Double acting type PD Available in size 150 up to 600 Old design (El-O-Matic type E) Single
CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations
CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations www.clarksol.com SERIES 8P0O80/82/135/136 SERIES 8P0129/131(T,L) 80: Direct mount
Type 1035/El-O-Matic Rack-and-Pinion Rotary Actuator
Product Bulletin Type 1035/El-O-Matic Rack-and-Pinion Rotary Actuator Type 1035/El-O-Matic double-acting and spring-return rotary valve actuators are compact, simply-designed control devices quality-engineered
Bettis RPE-Series Rack and Pinion Pneumatic Actuators
Bettis RPE-Series Rack and Pinion Pneumatic Actuators Product Data Sheet September 2017 BE.00.00 Rev. 3 High quality and economical actuator Improve plant and operator safety Riable and flexible in process
KF Contromatics Series PA/PAS M5 Pneumatic Actuators
The KF Contromatics M5 series rack-and-pinion actuator is the most versatile unit available today. All are rated for 150 PSIG inlet pressure and offer the DLS feature of double limit stops as standard
INLINE supplies a range of pneumatic 1/4 turn, RACK and PINION TYPE rotary actuators, in double-acting and spring return versions.
Note: The parts referred to by the numbers in parentheses are shown on page 3 of this instruction manual INLINE supplies a range of pneumatic / turn, RACK and PINION TYPE rotary actuators, in double-acting
TKD SERIES 3-WAY BALL VALVES - TRUE UNION
TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of
KEYSTONE F89 PNEUMATIC QUARTER-TURN ACTUATOR GENERAL PURPOSE / HAZARDOUS AREA
FEATURES Direct mounting to all Keystone butterfly valves and ball valves. Valve connection compatible with Keystone (imperial and metric) and ISO 5211. Double Rack and Pinion design nullifies side loads
ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL
ATEX 94/9/EC SIL3 IEC 61508 GOST-R TYPE APPROVAL 95 90 75 Stroke 15 0 4. Universal and anti-blowout drive shaft It permits an easy conversion from parallel to diagonal square and vice versa. It is also
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 1370 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) Ø L C PD PE PD D E F Kg PE D E
Quad4 Pneumatic Actuators
The SVF Quad4 TM quarterturn rack & pinion actuator is a four piston actuator which generates torque around a centrally located pinion, giving more than double the torque of single & double rack & pinion
EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators
EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators Product Data Sheet EF.00.00.EN Rev. 8 January 2018 High quality and economical actuator Improve plant and operator safety Reliable and flexible in
Meridian TM EC and DRC Series. Pneumatic Actuators
Meridian TM EC and DRC Series Pneumatic Actuators The Meridian TM Pneumatic Actuator DRC Series Features & Benefits: The Meridian TM Pneumatic Actuator has proven to be the most reliable actuator by providing
Double Acting & Spring Return. SERIES 92/93 Rack & Pinion PNEUMATIC ACTUATOR. The High Performance Company
PNEUMATIC ACTUATOR SERIES 92/93 Rack & Pinion Double Acting & Spring Return The High Performance Company SERIES 92/93 Styling, strength, compactness, and simplicity of design have been combined to produce
Established Leaders in Valve Actuation. RCI265 Scotch Yoke Actuator For Quarter-Turn Valves
Established Leaders in Valve Actuation Scotch Yoke Actuator For Quarter-Turn Valves Remote Control Actuators - Quality Controlled Since the company was founded in 1961, Remote Control has become the standard
SA Spring return type DA Air return type
Smart Solution for Actuator Pneumatic Actuator 0 R A T RAT Series Pneumatic Actuator was designed and developed based on the advanced technology and new material. Order Code R AT Code KZE Product Actuator
A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves
KEYSTONE A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves Features Direct mounting to all Keystone butterfly
Pneumatic Rotary Actuators and Accessories
CONTROLS A Division of A-T Controls, Inc. Pneumatic Rotary Actuators and Accessories II GD c IIC 00 FEATURES TRIAC pneumatic actuators are designed and manufactured to provide the highest cycle-life on
BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
Automax SuperNova Series. Pneumatic Rack & Pinion Actuators
Automax SuperNova Series Pneumatic Rack & Pinion Actuators The Flowserve S Series SuperNova pneumatic actuator is the latest development of the previous version, which won worldwide praise for its reliability,
Quad4 Pneumatic Actuators High Performance, Four Piston, Rack & Pinion Actuators
The SVF Quad TM quarterturn rack & pinion actuator is a four piston actuator which generates torque around a centrally located pinion, giving more than double the torque of single & double rack & pinion
Pneumatic Actuator D Series, Three Position
45 www.injoyindustry.com Feature D series of pneumatic rack & pinion actuator is designed on the basis of C series pneumatic actuator, displacing the complicated electronic control by simple mechanical
516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - N123 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
I & M UT Series (2003 Design)
I & UT Series (003 Design) 3170 Wasson Road Cincinnati, OH 4509 USA Phone 513-533-5600 Fax 513-871-0105 marwin@richardsind.com www.marwinvalve.com Installation & aintenance Instructions for arwin UT Series
TKD SERIES 3-WAY BALL VALVES - TRUE UNION
TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of
BALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
BUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - 223 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
Keystone PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves Features General application The
RCI 200 Series Actuators
PNEUMATIC RCI 200 Series Actuators TECHNICAL DATA SHEET The Remote Control RCI 200 Series Pneumatic Actuator features a modern scotch yoke mechanism for high starting and ending torques in a very compact
Parts List 8-16 HABONIM COMPACT II
BULLETIN B60 PISTON PNEUMATIC ACTUATOR COMPACT II SERIES TABLE OF CONTENCE COMPACT DESIGN PRINCIPLE OF OPERATION PARTS LIST MAIN FEATURES TORQUEMETRIC TORQUEIMPERIAL TECHNICAL DATA DIMENSIONS HOW TO ORDER
radius Series A pneumatic rack & pinion actuators
radius Series A pneumatic rack & pinion actuators EVOLUTION IN ENGINEERING The Series A double acting and spring return pneumatic rack and pinion actuators from Radius offer uncompromising standards of
radius Series A pneumatic rack & pinion actuators
radius Series A pneumatic rack & pinion actuators EVOLUTION IN ENGINEERING Seals: Buna-N Nitrile is standard. Optional materials are available. The Series A double acting and valve and damper applications.
A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves.
A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves. Features Direct mounting to all Keystone Butterfly Valves.
BALL VALVE WITH ADA PNEUMATIC ACTUATOR
702-703 BALL VALVE WITH ADA PNEUMATIC ACTUATOR DESCRIPTION The 702-703 ball valves are dedicated to the automatic shut off of industrial fluid s lines. It is a 3 pieces full valve with internal screws
A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves.
A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves. Features Mounting to valve either directly or via bracket,
Fluid Power Actuators and Control Systems. Established Leaders in Valve Actuation. R Range. Rack & Pinion Actuators. Publication F401iE Issue 02/07
Fluid Power Actuators and Control Systems Established Leaders in Valve Actuation R Range Rack & Pinion Actuators Publication F4iE Issue /7 Rotork Actuators Quality Controlled In the 5 years since the company
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
501M series - Triple Eccentric Metal Seated Butterfly Valves p / 301E series - Butterfly Valves with rubber seat p. 6
PRODUCT GUIDE 501M series - Triple Eccentric Metal Seated Butterfly Valves p. 4 p. 5 401N series - Double Eccentric Butterfly Valves 301 / 301E series - Butterfly Valves with rubber seat p. 6 p. 6-7 301TSS
771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR
771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTIC The 771 XS wafer ball valve is dedicated to the automatic shut-off of low and medium pressure industrial fluids lines up to 16 bar. The
BR 31a Rack-and-pinion Actuator,
Operating, assembly and maintenance instructions BR 31a Rack-and-pinion Actuator, SRP and DAP 1. General These instructions are intended to support the user in the assembly, maintenance, and repair of
I&M UT Series (2003 Design)
I&M UT Series (2003 Design) 3170 Wasson Road Cincinnati, OH 45209 USA Phone 513-533-7340 ax 513-533-7343 E-Mail: marwin@richardsind.com www.marwinvalve.com Installation & Maintenance Instructions for Marwin
Pneumatic Actuator PIK Series
Pneumatic Actuator PIK Series Engineering Creative Solutions for Fluid Systems Since 1901 INTRODUCTION Pratt Industrial designs and provides high quality actuators and services related to valve automation.
Tyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
AVAILABLE MODELS AND SIZES SPECIFICATIONS
SPRINGS (Key 18) END CAP (Key 14) HOUSING (Key 1) INDICATOR CAP (Key 30) DRIVE SHAFT (Key 13) O-RING (Key 20) The Dyna-Flo D-Force actuator is a rugged dual piston scotch yoke actuator designed specifically
WAYS BALL VALVES WITH ADA ACTUATOR
783-786 3-WAYS BALL VALVES WITH ADA ACTUATOR MAIN CHARACTERISTICS The three-ways flanged ball valve type 783-785 à brides is dedicated to the mixing or deviating functions in process of fluids. With full
Your Global Flow Control Partner. Series 92/93 Pneumatic Actuators. Technical Manual
Your Global Flow Control Partner Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 04/18/2017 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation Notes...
Bettis RPE-Series Rack and Pinion Pneumatic Actuators
Rack and Pinion Pneumatic Actuators BE.00.00 Rev. 7 March 2019 High quality and economical actuator Improve plant and operator safety Reliable and flexible in process control Increase serviceability BEG.01.00.EN,
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
Pneumatic rotary drive
Pneumatic rotary drive Modular program for mounting of quarter turn valves such as ball valves and butterfly valves NMUR and ISO 5211 interfaces Position feedback (including Ex-Versions) Type 2051 can
715 XS BALL VALVE + ADA PNEUMATIC ACTUATOR
715 XS BALL VALVE + ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTICS The 715 XS isolating valve is a two pieces ball valve for industrial applications with all compatible fluids. The body and the trim are full
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR VALVE FEATURES The 736 XS-746 XS is a 3 pieces full bore ball valve for industrial fluids, especially made to be easily actuated and to offer a good and long
Rack and Pinion Actuator BR 31a Typ SRP und DAP
Forged stainless steel Rack and Pinion Actuator BR 31a Typ SRP und DAP Application: The stainless steel actuators are a corrosion resistant rack and pinion actuator particular engineered for corrosive
Flow Line Controls. Installation & Operations Manual SERIES 20/21 Pneumatic Actuators
Flow Line Controls Installation & Operations Manual SERIES 20/21 Pneumatic Actuators Flow Line Controls, Inc. P.O. Box 677 Schriever, LA 70395 Phone: 985-414-6003 Toll Free 1-800-815-9226 Fax 985-414-6072
D-Series Rack & Pinion Pneumatic Actuators
D-Series Rack & Pinion Pneumatic Actuators Introduction 2 Bettis D-Series pneumatic rack and pinion actuators provide its users with reliability and economy in valve automation. Specifically designed for
Scotch Yoke Actuators 2016 EDITION. Heavy Duty Pneumatic Actuators SHD and CHD series. The Best Way To Automate Your Process.
The Best Way To Automate Your Process Heavy Duty Pneumatic Actuators SHD and CHD series Scotch Yoke Actuators 2016 EDITION Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Tel: +1.636.272.4934
Note: the numbers in parenthesis refer to the components in the exploded view of page 3 for UT-0 thru UT-6.5 and page 4 for UT-7 and UT-8.
Note: the numbers in parenthesis refer to the components in the exploded view of page 3 for UT-0 thru UT-6.5 and page 4 for UT-7 and UT-8. CAUTION: Remove dust from the actuator that may cause sparks;
brands you trust. CRANE - Automation Actuators and Instrumentation
brands you trust. CRANE - Automation Actuators and Instrumentation Automation Capabilities Overview CRANE Energy Flow Solutions provides a variety of valve automation products, including pneumatic and
RCI 200 Series Actuators
PNEUMATIC RCI 200 Series Actuators TECHNICAL DATA SHEET The Remote Control RCI 200 Series Pneumatic Actuator features a modern scotch yoke mechanism for high starting and ending torques in a very compact
SVDA & SVSR Series Pneumatic Actuators. Installation and Operation Manual
Installation and Operation Manual Introduction This instruction manual contains important information regarding the installation, operation, maintenance and storage for Southern Valve SVDA and SVSR Series