Pneumatic Actuators New AD and AS (Sizes 0025 to 0350)

Transcription

1 Pneumatic Actuators New AD and AS (Sizes 0025 to 0350) APOLLO RACK & PINION Designed and manufactured for the ultimate in durability and reliability, the new Apollo Pneumatic Rack & Pinion Actuators provide outstanding service life. Apollo Rack & Pinion actuators have replaceable insert drive adapters in all but the largest models, and many units have dual F series bolt patterns. The numerous actuator drive and bolt pattern combinations allow direct mounting of several valve styles. FEATURES 1. Cast Aluminum Body Yellow Chromate Powder Coat Finish 2. Die Cast Aluminum End Caps Yellow Chromate Powder Coat Finish 3. Die Cast Aluminum Pistons Hard Anodized 4. Aluminum Alloy Pinion Hard-coat Anodized Finish 5. Drive Inserts Extruded Aluminum Hard-coat Anodized Finish 6. Preloaded Concentric Springs Delta-Tone Coated 7. Bushings Polyoxymethylene (POM) BENEFITS Compact Rack & Pinion Design Quarter-Turn Operation Designed for use on a variety of Valve Types: Ball Valves, Butterfly Valves, Plug Valves Applicable to Damper and Door Openers Both Double-Acting and Spring-Return Units Double-Acting Torque Outputs from 220 in-lbs to 3547 in-lbs with an 80 psi Air Supply Removable/Replaceable Drive Inserts* Pre-loaded Spring Assemblies ISO 5211 Valve Mounting NAMUR (VDI/VDE 3845) Accessory Mounts ATEC Classification II, 2 GD, Zones 1 or 2 (Gases) and 21 or 22 (Dust) Anti Blow-Out Pinion Design Maximum Pressure Rating: 116 psig (8 bar) Compatible Media: Clean, Dry Air, Filtered Non-corrosive Gas or Light Hydraulic Oil Pre-lubricated for the life of the Actuator Chromate Corrosion Protection on all Aluminum Components Each Unit is Serialized 5 Year Apollo Warranty Notes: * A wide selection of standard inserts is available for Square, DIN and Double-D drives. See page O-Ring Seals Standard Temp. (-4 F to 180 F): Buna-N High Temp. (-4 F to 250 F): Fluorocarbon Low Temp. (-40 F to180 F): Silcone 9. Capscrews, Nuts & Other Hardware Stainless Steel or Delta-Tone Coated 3

2 0025 to 0350 Parts List New AD and AS (Sizes 0025 to 0350) Part Qty Description Material Notes 1 1 Body Cast Aluminium alloy Chromated and polyurethane powder coated 2 2 End cap Cast Aluminium alloy Chromated and polyurethane powder coated 3 2 Piston Cast Aluminium alloy Chromated 4 1 Pinion High grade aluminium Hard anodized 5 Max. 12 Spring cartridge Spring steel Electrophoretic coated 6 * 2 Bearing strip piston rack POM 7 * 2 Bearing piston PTFE 25% carbon-filled 8 * 2 Bearing pinion POM 9 * 1 Thrust washer POM, black UV-stabilized 10 8 End cap screw Stainless Steel 11 * 1 Circlip Spring steel Deltatone coated 12 * 2 O-ring seal pinion Nitrile rubber 13 * 2 O-ring seal piston Nitrile rubber 14 * 2 O-ring seal end cap Nitrile rubber 15 * 2 O-ring seal limit stop Nitrile rubber 16 * 2 B-port seal Silicon rubber 17 2 Limit stop screw Stainless steel 18 2 Limit stop nut Stainless steel 19 2 Limit stop washer PA Warning sticker Polyester 21 1 Indicator assembly ABS + stainless steel screw 22 1 Center plate (option) Nylon PA6, Black 23 1 Insert drive Aluminium alloy * Included in repair kit 4

3 Dimensional Data New AD and AS (Sizes 0025 to 0350) ENVELOPE DIMENSIONS - SOLENOID INTERFACE - TOP MOUNTING INTERFACE ød1 ød x D4 D D6 4x D2 D5 øe5 4x 5/8-11 x 0.98 D5 ød1 ød3 E4 E3 E7 ±0.02 øe6 D E1 øe x D2 4x D4 Note: 1. DA = Double-Acting, SR = Spring-Return 2. Solenoid interface and top mounting interface according to VDI/VDE3845 (NAMUR) 3. The solenoid drilling pattern is shifted 0.16 for size 0025 and 0.08 for size 0040 vs. the centerline of the actuator. Tolerance limits unless otherwise specified: X.X = ± 0.02" X.XX = ± 0.01" Dim in Actuator Size Inches A A A A A A A A A B B B C C C C C

4 Dimensional Data New AD and AS (Sizes 0025 to 0350) VALVE INTERFACE AND DRIVE DETAILS Note: 1. Flange and square drive according to DIN 3337 Tolerance limits unless otherwise specified: X.X = ± 0.02" X.XX = ± 0.01" Size 25 to 350 4x D4 4x D2 E4 E1 E3 ød1 ød3 D5 øe5 øe6 D6 øe E7 ± Dim in Actuator Size Inches ISO 1 F05 F07 F07 F07 F10 F10 F10 D D2 1/4"-20 5/16"-18 5/16"-18 5/16"-18 3/8"-16 3/8"-16 3/8"-16 x0.39" x0.39" x0.39" x0.39" x0.63" x0.63" x0.63" ISO 2 F03 F05 F05 F05 F07 F07 F07 D D /4"-20 1/4"-20 1/4"-20 5/16"-18 5/16"-18 5/16"-18 x0.31" x0.39" x0.39" x0.39" x0.39" x0.39" x0.39" D D E1 Max E1 Min E E E E E E TORQUE OUTPUT OF DOUBLE ACTING RACK & PINION ACTUATORS (IN - LB) Actuator Size Supply Pressure (psi) AD AD AD AD AD AD AD Double-Acting Torque Diagram Spring-Return Torque Diagram Start Torque Constant Torque End Torque Start Torque Air Stroke End Torque Start Torque Spring Stroke End Torque Rotation Rotation Counter Clockwise Rotation Clockwise 6

5 TORQUE OUTPUT OF SPRING RETURN RACK & PINION ACTUATORS (IN - LB) Air Stroke Supply Pressure (psi) Actuator Spring Spring Stroke Size Set Start End Start End Start End Start End Start End Start End Start End Start End Start End AS AS AS AS AS AS AS STANDARD REV

6 8 Distributed By: M&M Control Service, Inc Technical Data New AD and AS (Sizes 0025 to 0350) ACTUATOR WEIGHT OPERATING SPEED RESULTS (See test conditions below) Actuator Double-Acting Spring-Return Cycle Time in Seconds Size lbs lbs Actuator Size Spring-Return Double-Acting A-port pressurized Spring Stroke A-port pressurized B-port pressurized DISPLACEMENT Actuator Volume Consumption per stoke (cubic inch, pressure in psig) Maximum Volume (cubic inch) Outward Stroke (Double-Acting & Spring Return) Inward Stroke (Double-Acting Only) Actuator Size Central 1 End cap 2 Displaced 3 chamber chamber volume 40 psig 80 psig 120 psig 40 psig 80 psig 120 psig NOTES: 1. For Double-acting and Spring-return. Pistons at 90 outward position 2. Only for Double-acting. Pistons at 0 inward position 3. Stroke is 90 OPERATING SPEED TEST Solenoid with flow capacity: 0.6 m 3 /hr Pipe diameter: 6 mm Medium: clean air Supply pressure: 80 psi Load: with average load Stroke: 90 Temperature: Room temperature SELECTING/SIZING APOLLO RACK & PINION ACTUATORS Establish the valve operating torque beginning with the torque constants for the appropriate pressure and valve as found on pages Use the torque adjustment factors found on page 52 to arrive at an in-service torque. Multiple adjustment factors may be required. Do not forget to include adjustments for graphite stem packing. FOR DOUBLE ACTING ACTUATORS Based on the available air supply select an actuator with torque outputs that exceed the in-service torque by at least 10%. FOR SPRING RETURN ACTUATORS Considering the available air supply, select an actuator where both the Spring-Ending torque figure and the Air-Ending torque figure exceeds the in-service torque by at least 10%. How to Order Apollo Pneumatic Rack & Pinion Actuators New AD and AS APOLLO RACK & PINION NUMBERING SYSTEM A S 0350 N 04 A C A PREFIX ACTION SIZE SEAL OPTION SPRING SET INSERTS FAIL POSITION REVISION A D = DOUBLE ACTING 0025 N = NITRILE 00 (DA) A = STANDARD SQUARE C = FAIL CLOSED (FC) A S = SPRING RETURN 0040 H = FLOUROCARBON 02 B = WITHOUT INSERT F = FAIL OPEN (FO) K = KIT 0065 L = SILICONE 03 D = NO SPRING

7 Pneumatic Actuators AD and AS (Sizes 0600 to 4000) APOLLO RACK & PINION Designed and manufactured for the ultimate in durability and reliability, the new Apollo Pneumatic Rack & Pinion Actuators provide outstanding service life. Apollo Rack & Pinion actuators have replaceable insert drive adapters in all but the largest models, and many units have dual F series bolt patterns. The numerous actuator drive and bolt pattern combinations allow direct mounting of several valve styles. FEATURES 1. Cast Aluminum Body Yellow Chromate Powder Coat Finish BENEFITS Compact Rack & Pinion Design Quarter-Turn Operation Designed for use on a variety of Valve Types: Ball Valves, Butterfly Valves, Plug Valves Applicable to Damper and Door Openers Both Single Stop and Double Stop Versions** Both Double-Acting and Spring-Return Units Double-Acting Torque Outputs from 6028 in-lbs to in-lbs with an 80 psi Air Supply Removable/Replaceable Drive Inserts* 2. Die Cast Aluminum End Caps Yellow Chromate Powder Coat Finish 3. Die Cast Aluminum Pistons Hard Anodized 4. Aluminum Alloy Pinion 7075-T6 Hard-coat Anodized Finish 5. Drive Inserts Extruded Aluminum Hard-coat Anodized Finish 6. Preloaded Concentric Springs Deltatone Coated 7. Piston Guides Molybdenum Disulfide filled Polyamide 8. Bushings Polyoxymethylene (POM) 9. O-Ring Seals Standard Temp. (-4 F to 180 F): Buna-N High Temp. (-4 F to 250 F): Fluorocarbon Low Temp. (-40 F to180 F): Silcone 10. Capscrews, Nuts & Other Hardware 304 Stainless Steel Pre-loaded Spring Assemblies ISO 5211 Valve Mounting NAMUR (VDI/VDE) Accessory Mounts ATEC Classification II, 2 GD, Zones 1 or 2 (Gases) and 21 or 22 (Dust) Anti Blow-Out Pinion Design Maximum Pressure Rating: 116 psig (8 bar) Compatible Media: Clean, Dry Air, Filtered Non-corrosive Gas or Light Hydraulic Oil Pre-lubricated for the life of the Actuator Chromate Corrosion Protection on all Aluminum Components Each Unit is Serialized 5 Year Apollo Warranty Notes: * A wide selection of standard inserts is available for Square, DIN and Double-D drives. ** Single Stop units are used where the open position of the valve requires precise adjustment. These are standard on all actuators with the exception of the two larger sizes where single stops are optional. Actuators with dual adjustable stops are also available for those applications on butterfly valves, for example, to allow precise adjustment of both the open and closed positions. Refer to page 16. 9

8 0600 to 1600 Parts List AD and AS Part Qty 01 Body 1 02 Piston 2 03 Pinion 1 04 AD End Cap (Double Acting) 2 05 AS End Cap (Spring Return) 2 06 Inner Spring 0 to 2 07 Middle Spring 0 to 2 08 Outer Spring 0 to 2 09 Spring Holder 2 10* Guide Band 1 11* Piston Guide 2 12 Lower Bearing 1 20* Upper Bearing 1 Part Qty 21* Thrust Washer 1 22* Stop Screw Washer 2 23* Stop Screw Washer 2 25* End Cap O-ring 2 26* Piston O-ring 2 27* Upper Pinion O-ring 1 28* Lower Pinion O-ring 1 29* Stop Screw O-ring 2 30* Stop Screw O-ring 2 34 Stop Screw Washer 2 35 Spring Clip 1 36 End Cap Bolt 8 37 Limit Stop Bolt 2 Part Qty 38 Stop Adjustment Nut 2 40 Limit Stop Bolt 2 42 Nut Cover 2 43 Port O-ring 2 44 Insert/Adapter 1 47 Stroke Cam 1 48 Dual Stop Bolt 1 49* Dual Stop O-ring 1 50* Dual Stop Washer 1 51 Dual Stop Lock Nut 1 52 Dual Stop Nut Cover 1 * Included in Repair Kit 10

9 2500 to 4000 Parts LIst AD and AS Part Qty 01 Body 1 02 Piston 2 03 AD End Cap (Double Acting) 2 04 AS End Cap (Spring Return) 2 05 Pinion 1 06 Gear Rack 2 08 Coil Spring 0 to 14 09* Lower Bearing 1 Part Qty 10* Upper Bearing 1 14* Piston Guide 2 15* Heel Guide 2 16* Piston O-ring 2 17* End Cap O-ring 2 18* Lower Pinion O-ring 1 19* Upper Pinion O-ring 1 20* Spring Clip 1 Part Qty 21* Thrust Washer 1 23 Rack Capscrew 2 or 4 24 DA End Cap Bolt 8 or SR End Cap Bolt 8 or Port O-ring 2 * Included in Repair Kit 11

10 Dimensional Data AD and AS (Sizes 0600 to 4000) For Models with Dual Adjustable Limit Stops , RACK & PINION ACTUATOR ENVELOPE DIMENSIONS INCHES Model Overall Length A (DA) Overall Length B (SR) Body Height C Body Width H Solenoid Pad Offset I Port Location J Adjustable Closed Stop J1* Adjustable Closed Stop L* Stop Size Y* Stop Protrusion X max.* / / / N/A N/A N/A N/A N/A N/A N/A N/A *Applies to double stop versions only 12

11 Dimensional Data AD and AS (Sizes 0600 to 4000) RACK & PINION ACTUATOR DRIVE DETAILS INCHES Model Bottom Pinion Diameter K Valve Stem Clearance M1 Insert or Adapter Height M3 Pinion Recess N Standard Square Output O max Standard Square Output O min Across Corners Diameter P N/A N/A RACK & PINION ACTUATOR MOUNTING DIMENSIONS INCHES Model Primary ISO F Pattern Primary Bolt Circle V Primary Fastener W Secondary ISO F Pattern Secondary Bolt Circle V1 Secondary Fastener W F /8-16 x.63 F /2-13 x F /8-16 x.63 F /8-11 x F /4-10 x 1.14 N/A N/A N/A 2500 F /4-10 x 1.14 N/A N/A N/A 4000 F /4-10 x 1.14 F /8-11 x.98 RACK & PINION ACTUATOR MOUNTING DETAILS INCHES Model Namur Shaft Extension D Namur Shaft Diameter E Thrust Bearing Diameter E2 Namur Shaft Flats F Namur Flat Length G Namur Bolt Pattern T1 Namur Bolt Pattern U

12 Rack & Pinion Actuator TORQUE OUTPUT OF DOUBLE ACTING RACK & PINION ACTUATORS (IN - LB) Actuator Size Supply Pressure (psi) AD AD AD AD AD TORQUE OUTPUT OF SPRING RETURN RACK & PINION ACTUATORS (IN - LB) Air Stroke Supply Pressure (psi) Actuator Spring Spring Stroke Size Set Start End Start End Start End Start End Start End Start End AS AS AS AS AS STANDARD 14

13 Technical Data AD and AS (Sizes 0600 to 4000) Double Acting AD0600 AD0950 AD1600 AD2500 AD4000 Weight (lbs) Spring Return AS0600 AS0950 AS1600 AS2500 AS4000 Weight (lbs) Displacement (cu in.) AD0600 AS0600 AD0950 AS0950 AD1600 AS1600 AD2500 AS2500 AD4000 AS4000 Port A CCW Port B CW Air consumption (scf per 90 ) = (Displacement/1728)*(Supply Pressure )/14.7 Operating Time AD0600 AS0600 AD0950 AS0950 AD1600 AS1600 AD2500 AS2500 AD4000 AS4000 Seconds SELECTING/SIZING APOLLO RACK & PINION ACTUATORS Establish the valve operating torque beginning with the torque constants for the appropriate pressure and valve as found on pages Use the torque adjustment factors found on page 52 to arrive at an in-service torque. Multiple adjustment factors may be required. Do not forget to include adjustments for graphite stem packing. FOR DOUBLE ACTING ACTUATORS Based on the available air supply select an actuator with torque outputs that exceed the in-service torque by at least 10%. FOR SPRING RETURN ACTUATORS Considering the available air supply, select an actuator where both the Spring-Ending torque figure and the Air-Ending torque figure exceeds the in-service torque by at least 10%. Note: Single-Stop actuators are appropriate for use on ball valves. Dual-Stop actuators are required for most butterfly valve applications but may also be used on ball valves. How to Order Apollo Pneumatic Rack & Pinion Actuators AD and AS (Sizes 0600 to 4000) APOLLO RACK & PINION NUMBERING SYSTEM A S 1600 N 04 1 A F PREFIX ACTION SIZE SEAL OPTION SPRING SET LIMIT STOP INSERTS AS MODEL ONLY A D = DOUBLE ACTING 0600 N = NITRILE 00 (DA) 0 = None** A = STANDARD SQUARE Add Suffix F if S = SPRING RETURN 0950 (Normal temp range, -4 to 175 F) 01 (Std. on sizes 0012, 2500, & 4000) B = WITHOUT spring-to-open K = KIT 1600 H = FLOUROCARBON 02 1 = Single Adjustable Limit Stop (i.e. fail open), 2500* (High temp range, -4 to 250 F) 03 (For sizes 0025 thru 1600 only) otherwise, leave 4000* L = SILICONE 04 2 = Dual Adjustable Limit Stops blank (Low temp range, -40 to 175 F) 05 (For sizes 0025 thru 1600 only) * No insert adapter options ** Optional double stroke adjustment plate is available for 2500 & 4000 (see price list) 15

14 Acuator Inserts AD and AS (Sizes 0025 to 1600) Actuator Item Number Description Fits Stems of the Following Dimensions Imperial (in) Metric (mm) X-Dimension Y-Dimension X-Dimension Y-Dimension AD/AS 0025 AD/AS 0040/0065 AD/AS 0100 AD/AS 0150/0200/0350/0600 AD/AS 0950 AD/AS 1600 CX04573 ADAPTER, 11MM SQ CX04549 ADAPTER,0.500DIA X 0.397FLAT, Ø Ø13 CX04684 ADAPTER,BLANK CX04620 ADAPTER, 77D104 TO AD/AS 0040,0065; 7MM SQ CX04550 ADAPTER,0.555DIA X 0.397FLAT, Ø Ø14 CX04570 ADAPTER,11MM SQ,ALUM,77D105 TO CX04551 ADAPTER,0.625DIA X 0.476FLAT, Ø Ø16 CX04580 ADAPTER,14MM SQ, CX04552 ADAPTER,0.751DIA X 0.555FLAT, Ø Ø19 CX04675 ADAPTER,BLANK CX04553 ADAPTER,0.397DIA X 0.524FLAT, Ø13 CX04554 ADAPTER,0.625DIA X 0.475FLAT, Ø Ø16 CX04623 ADAPTER, 14MM SQ CX04555 ADAPTER,0.750DIA X 0.555FLAT, Ø Ø19 CX04584 ADAPTER, 17MM SQ CX04569 ADAPTER,19MM (0.748 SQ,) CX04685 ADAPTER,BLANK CX04556 ADAPTER,0.628DIA X 0.376FLAT, Ø Ø16 CX04720 ADAPTER, 11MM SQ CX04558 ADAPTER,0.475DIA X 0.650RECT, CX04572 ADAPTER, 77D TO CX04566 ADAPTER,0.750DIA X 0.555FLAT, Ø Ø19 CX04560 ADAPTER,0.673 X 0.886RECT, CX04571 ADAPTER,19MM CX04581 ADAPTER,22MM CX04559 ADAPTER,0.869DIA X 1.18RECT, CX04557 ADAPTER,1.250DIA X 0.949FLAT, 0.95 Ø Ø32 CX04582 ADAPTER,27MM CX04686 ADAPTER,BLANK CX04567 ADAPTER,0.673 X 0.886RECT, CX04562 ADAPTER,1.125DIA X 0.870FLAT, 0.87 Ø Ø29 CX04561 ADAPTER,1.250DIA X 0.949FLAT, 0.95 Ø Ø32 CX04622 ADAPTER, 36MM SQ CX04563 ADAPTER,BLANK CX04568 ADAPTER,1.250DIA X 0.870FLAT, 0.87 Ø Ø29 CX04564 ADAPTER,1.248DIA X 0.950FLAT, 0.95 Ø Ø32 CX04565 ADAPTER,BLANK CX04680 CLASS 150/300 2"HPBFV (.356 x.490) CX04714 CLASS 150/ /2" & 3" HPBFV (.434 x.580) AD/AS 0150/0200/0350/0600 CX04681 CLASS 150/300 4"HPBFV (.553 x.725) (Fits HPBFVs) CX04682 CLASS 150/300 5"&6" HPBFV (.671 x.890) CX04683 CLASS 150 8" HPBFV (.750 x.1.01) Notes: 1. Inserts for op0onal stem sizes or when the actuator is ordered without a factory installed insert. 2. Contact factory for addi0onal configura0ons and pricing. Insert- Stem Dimensions 16

15 Acutorque Stainless Steel Actuator DESIGN AND CONSTRUCTION a b 1. INVESTMENT CAST BODY Assures manufacturing of other special alloys, such as Monel 2. UNIQUE DRIVE PINION One piece stainless steel alloy shaft, precision machined gear and teeth for precise control 3. BEARINGS Replaceable top and bottom TFE Pinion Bearings to ensure low friction, stability above 400 F, and chemical resistance 4. TRAVEL STOPS Provides +/-4 travel adjustment in outboard direction 5. ACCESSORY MOUNTING Manufactured to NAMUR to provide international standardized mounting 6. STAINLESS STEEL PISTONS Precision cast pistons are guided through full face engagement with the pinion and piston guide 7. NAMUR SLOTTED SHAFT Standard to provide a self-centering positive drive for positioners, a variety of switches 8. ACTUATOR MOUNTING Manufactured in accordance with ISO 5211 to ensure mounting the actuator directly on valves 9. PRE-LOADED CARTRIDGES Converts a standard double acting actuator to a spring return unit by simply removing the end caps and adding the spring cartridges 10. NAMUR SOLENOID MOUNTING International standard for direct mounting of solenoid valves 17

16 Operation Acutorque Stainless Steel Actuator The Apollo Acutorque actuator is manufactured with an integral and internal air manifold. The solenoid mounting pad is manufactured to Namur dimensional standards as to allow for the direct mounting of various manufacturers solenoid valves and other flow control devices. For applications not requiring a direct mount solenoid valve, ports are tapped to NPT standards (American National Standard taper threads). REVERSE ROTATION When required, a clockwise rotation of the drive pinion, by means of air to PORT A can be achieved by reversing the pistons inside the actuator body (rotate 180 degrees). SPRING CONFIGURATION Each Acutorque actuator comes with a complete spring pack (6 springs per side with nylon retainers) unless otherwise specified. When less than the full spring pack is desired for various torque outputs (see torque chart); springs can be removed from the actuator end caps. It is very important that springs can be arranged in a symmetrical manner (positioned as shown) so that unwarranted side-load does not occur between the pistons and actuator body. CAUTION: Refer to operation and maintenance instructions before disassembly and removal of springs. Air to PORT A: Pressure applied enters center of chamber forcing the pistons outward and rotating the drive pinion in a counter-clockwise direction and forcing exhaust air out of PORT B. Air to PORT B: Air pressure enters the outer chambers forcing the pistons inward and rotating the drive pinion in a clockwise direction while forcing exhaust air out of PORT A. Loss of air pressure in the center chamber allows energy in the compressed springs to force the pistons inward, resulting in a clockwise rotation of the drive pinion while exhaust air leaves via PORT A. 18

17 Features Acutorque Stainless Steel Actuator GRADE OF STAINLESS STEEL Body & End Caps 304 Shaft 17-4 ph Piston 303 Bolts 18-8 CORROSION RESISTANCE All metal components are cast or machined from Stainless Steel or Monel, which offers excellent resistance to most corrosive chemicals as well as industrial atmospheres. NO LUBRICATION All actuators are factory lubricated for the optimum life of the actuator under normal conditions. Teflon piston bearings are used because of their selflubricating properties. SIMPLE MAINTENANCE Each actuator is designed for ease of maintenance. Should you wish to change a spring rating or completely rebuild a unit, total disassembly and reassembly is easily performed in just minutes with standard shop tools. ISO/NAMUR MOUNTING By using ISO/Namur standards, our actuators lend themselves to a host of various manufacturers direct mount accessories. Solenoid valves, limit switches, positioners, etc. bolt directly to the actuator and in turn reduces the cost of assembly and installation of automated packages. Flexibility for future system modifications is greatly enhanced. QUALITY Each part of the actuator must pass a stringent quality test before it can be incorporated into an assembly. All materials used in construction must be certified and tested to prove their proper composition. Every cast part must pass an X-ray test before proceeding to the machining process. After machining, every part is dimensionally evaluated to assure it meets acceptable tolerance. SAFETY All actuator bodies and end caps are investment cast stainless steel, rugged and built to last. It may be argued that the mechanical properties of stainless steel permit the ability to use this wall tubing in the construction of an actuator. However, that is not the case with our actuator. Thick wall castings mean protection for actuator internal porting and components as well as maintenance and operating personnel. Our unique drive pinion design ensures blowout proof protection. Spring retainers are incorporated to allow safe removal of end caps during spring torque rating change or rebuild process. Part Qty Material 1 Body Stainless Steel 2 Piston Stainless Steel 3 End Caps-Double Acting 2 Stainless Steel 4 Drive Pinion Stainless Steel 5 Guide Bearing Plate 2 Nylon 6 6 Pinion Bearing Top 1 Teflon 7 Pinion Bearing Bottom 1 Teflon 8 Snap Ring 1 Stainless Steel 9 O-Ring-Inner Top 1 Viton 10 O-Ring-Outer Top 1 Viton 11a Washer 1 Stainless Steel 11b Bearing 1 Nylon 6 12 O-Ring-Inner Bottom 1 Viton 13 O-Ringer-Outer Bottom 1 Viton 14 O-Ring-Piston 2 Viton 15 Bearing-Piston 2 Nylon 6 Part Qty Material 16 O-Ring-End Cap 2 Nitrile 17a Bolts-End Cap 8 Stainless Steel 17b Spring Bearing 8 Stainless Steel 18 Adjusting Travel Stop 2 Stainless Steel 19 O-Ring-Travel Stop 2 Nitrile 20a Washer 2 Stainless Steel 20b Nut-Travel Stop 2 Stainless Steel 21 End Nut-Travel 2 Stainless Steel 22 Spring Retainer (S) * Nylon 6 23 Spring Retainer (L) * Nylon 6 24 Spring * Plated CS 25 Spring Screw * Stainless Steel 26 Spring Nut * Stainless Steel 27 Positioner Indicator 1 Nylon 28 Plug 2 Nylon 6 19

18 Dimensional Data Acutorque Stainless Steel Actuator can we get new drawings from engineering? TOP BOTTOM MOUNTING DIMENSIONS Model R S T V W X Y Z AA BB CC DD EE FF GG HH 3SD04500 mm 24 1/4 NPT M M M M5 8 3SS04560 in /4 NPT M M M M SD06000 mm 24 1/4 NPT M M M M6 8 3SS06060 in /4 NPT M M M M SD08500 mm 24 1/4 NPT M M M M8 12 3SS08560 in /4 NPT M M M M SD10500 mm 24 1/4 NPT M M M M8 12 3SS10560 in /4 NPT M M M M SD12500 mm 24 1/4 NPT M M M NA 3SS12560 in /4 NPT M M M NA NA 3SD14000 mm 24 1/4 NPT M M M NA 3SS14060 in /4 NPT M M M NA NA 3SD17000 mm 24 1/4 NPT M M M NA 3SS17060 in /4 NPT M M M NA NA 3SD21000 mm 24 1/4 NPT M M M NA 3SS21060 in /4 NPT M M M NA NA 20

19 Envelope Dimensions Acutorque Stainless Steel Actuator DIMENSIONS Model AS C D E F G H J K L N M Q 3SD04500 mm SS04560 in SD06000 mm SS06060 in SD08500 mm SS08560 in SD10500 mm SS10560 in SD12500 mm SS12560 in SD14000 mm SS14060 in SD17000 mm SS17060 in SD21000 mm SS21060 in Technical Data Acutorque Stainless Steel Actuator Acuator Volume (in³ per Air Consumption (scf per 90 rotation)* Model 90 cycle) CW CCW 3SS045X SS060X SS085X SS105X SS125X SS140X SS170X SS210X Notes: *Temperature and atmospheric conditions could change values above. Acuator Model Weight (lbs) 3SS045X0 9 3SS060X0 16 3SS085X0 23 3SS105X0 37 3SS125X0 52 3SS140X0 75 3SS170X SS210X0 258 Double Acting Torque Acutorque Stainless Steel Actuator Actuator Model Torque (Inch/Lbs) vs. Air Supply Pressure (PSI) SD SD SD SD Actuator Model Torque (Inch/Lbs) vs. Air Supply Pressure (PSI) SD SD SD SD

20 Spring Return Torque Acutorque Stainless Steel Actuator Torque (Inch/Lbs) vs. Air Supply Pressure (PSI) Actuator Spring Spring Stroke Model Set#* SS045X SS060X SS085X SS105X SS125X SS140X SS170X SS210X * X in Actuator Model is Spring Set 22

21 Scotch-Yoke Actuator G SERIES NAMUR The shaft driven accessory interface conforms to the NAMUR standard and is identical on all G-Series actuators, allowing for standardization of accessory mounting hardware and installation practices Pneumatic and hydraulic scotch-yoke actuators Automates ball, butterfly, plug valves and any other 90 rotating mechanisms Salt Spray Testing per ASTM B117 criteria. Construction features prevent water ingress, allowing G-Series actuators to meet IP 66 and IP 67M specifications and severe high pressure water deluge test OPERATING RANGES G-Series double acting actuators produce guaranteed minimum torque outputs from 10,000 lb-in. up to 6,000,000 lb-in. The spring return units produce spring torques from 2,500 lb-in. to 3,000,000 lb-in. Standard operating pressures: Pneumatic to 200 psig (14 BAR) Standard operating temperature is -20 F to +200 F (-29 C to +93 C) Optional trims available: 0 F to +350 F (-18 C to +177 C) -50 F to +180 F (-46 C to +82 C) Mechanical and hydraulic manual overrides are available MSS and ISO Valve Mounting The G-Series valve interface meets the dimensional requirements of MSS SP-101 or ISO 5211 defined for each torque range DOUBLE ACTING G1 PNEUMATIC ACTUATOR TORQUE CHART Operating Pressure (psig) Apollo Model No. Reference Number Stroke Position Output Torque (In-Lbs) 3TG G01008 Start/End Minimum TG G01009 Start/End Minimum TG G01010 Start/End Minimum TG G01012 Start/End Minimum TG G01014 Start/End Minimum

22 24 Distributed By: M&M Control Service, Inc Torque Ratings G Series Scotch-Yoke Actuator G SERIES PNEUMATIC DOUBLE-ACTING ACTUATOR TORQUE CHART Apollo Model No. 3TG TG TG TG TG TG TG TG TG TG Reference Number G2009 G2010 G2012 G2014 G2016 G3010 G3012 G3014 G3016 G3020 Stroke Position All published torques are guaranteed minimum values. Operating Pressure (psig) Output Torque (In-Lbs) Start/End Minimum Start/End Minimum Start/End Minimum Start/End Minimum Start/End Minimum Start/End Minimum Start/End Minimum Start/End Minimum Start/End Minimum Start/End Minimum SPRING RETURN G1 PNEUMATIC ACTUATOR TORQUE CHART Apollo Model No. 3TG TG TG TG TG TG TG TG TG TG Reference Number G01008-SR4 G01009-SR4 G1010-SR4 G01012-SR4 G01014-SR4 G01008-SR3 G01009-SR3 G01010-SR3 G01012-SR3 G01014-SR3 Spring Torque (In-Lbs) Start/Min/End Operating Pressure (psig) Output Torque Start/Min/End (In-Lbs) `

23 Torque Ratings G Series Scotch-Yoke Actuator SPRING RETURN G1 PNEUMATIC ACTUATOR TORQUE CHART (CONT.) Apollo Model No. 3TG TG TG TG TG TG TG TG TG TG Reference Number G01008-SR2 G01009-SR2 G01010-SR2 G01012-SR2 G01014-SR2 G0108-SR1 G0109-SR1 G01010-SR1 G01012-SR1 G01014-SR1 Spring Torque (In-Lbs) Start/Min/End Operating Pressure (psig) Output Torque Start/Min/End (In-Lbs)

24 Torque Ratings G Series Scotch-Yoke Actuator SPRING-RETURN ACTUATOR Apollo Model No. 3TG TG TG TG TG TG TG TG TG TG TG TG TG TG TG TG TG TG TG Reference Number G2009-SR2 G2010-SR2 G2012-SR2 G2014-SR2 G2016-SR2 G2009-SR1 G2010-SR1 G2012-SR1 G2014-SR1 G2016-SR1 G2009-SR4 G2010-SR4 G2012-SR4 G2014-SR4 G2016-SR4 G2009-SR3 G2010-SR3 G2012-SR3 G2014-SR3 Spring Torque (In-Lbs) Start/Min/End Operating Pressure (psig) Output Torque Start/Min/End (In-Lbs) All published torques are guaranteed minimum values. 26

25 Torque Ratings G Series Scotch-Yoke Actuator SPRING-RETURN ACTUATOR (CONT.) Apollo Model No. 3TG TG Reference Number G2016-SR3 G3010-SR2 3TG301202G3012-SR2 3TG TG TG TG TG TG TG TG TG TG TG TG TG TG TG TG TG G3014-SR2 G3016-SR2 G3020-SR2 G3010-SR1 G3012-SR1 G3014-SR1 G3016-SR1 G3020-SR1 G3010-SR4 G3012-SR4 G3014-SR4 G3016-SR4 G3010-SR3 G3012-SR3 G3014-SR3 G3016-SR3 G3020-SR3 Spring Torque (In-Lbs) Start/Min/End Operating Pressure (psig) Output Torque Start/Min/End (In-Lbs)