3/2 Way Ball Valves KHB3K
|
|
|
- Augustus Bryant
- 5 years ago
- Views:
Transcription
1 / Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN 5 SR = Pipe connection heavy range DIN 5 NPT = Female thread ANSI B.0. SAE = Female thread SAE J 54 UN/UNF PN up to 500 DN up to 50 Function diagram /-way change over ball valves L-bore, 90 neg. L-bore SO560, 90 neg. L-bore SO560., 80 pos. T-bore, 90 neg. T-bore, 80 neg. = undefined switching position Ball bore Materials Housing, connection adapters = Steel = Stainless steel Ball, control spindle = Steel = Stainless steel Ball seals = POM = PTFE (max. operating 00 bar) 8 = PEEK Control spindle seal = NBR (Perbunan) = PTFE (max. operating 00 bar) 4 = FKM (Viton) Handle 0 = Aluminium clamped handle, straight 0 = Aluminium clamped handle, cranked 0 = Zinc die-cast clamped handle, straight 04 = Zinc die-cast bolt-on handle, cranked 06 = Steel bolt-on handle, cranked 09 = Without handle Series (determined by manufacturer) Surface protection A = Zinc-plated, chrome (VI)-free ZN = Zinc-nickel, chrome (VI)-free Option SO560 = Seals on inlet side, negative switching overlap, switch 90 SO560. = Seals on inlet side, positive switching overlap, switch 80 TT = O-rings for low temperature, temperature range -40 C to +80 C SO 940 = Ball valve with 4 fixing holes (for example, panel mounting) SO 07 = Ball Valve with through holes E /.6 89
2 Technical specifications Types of connection: Light and heavy threaded pipe fitting to DIN 5 Whitworth female thread to ISO 8 NPT SAE Mounting position: Optional Ambient temperature: -0 C to +80 C Nominal : Up to PN 500 Operating fluids: Mineral oil to DIN 554 part and part (other fluids on request) Temperature of operating fluid: -0 C to +80 C Spare parts: Seal kits available on request Function system shut-off System System diverted By turning the control spindle the flow is diverted, according to the ball bore, and the opposite side is shut off leakage-free. The system pushes the ball against the non-pressurised side of the closed-off sealing cup. The ball shuts off the flow from port to port or leakage-free. When the direction of flow is from or to, some leakage can be expected, depending on the. During change-over all three ports are linked (negative switching overlap). Dimensions / way ball valve E /.6 90
3 Steel Connection type Type DN Int. Ø LW RA d i L L B H h h h S SW SW Weight Nom. PN DIN ISO 8 Female thread [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg] [bar] KHBK-G/8 4 8 G/ , ,5 9 0,5 500 KHBK-G/4 6 8 G/ , ,5 9 0,6 500 KHBK-G/8 0 0 G/8 4 7,9 4 5, 7, 40 8, , KHBK-G/ G/ , 7, 40 8,5 4, ,7 500 KHBK-G/ 6 5 G/ , ,5 0,8 40 KHBK-G/4 0 0 G/4 8 94, ,8 7,5 60,6 47,5 4 4,67 40 KHBK-G 5 5 G 0,5, ,6 9,5 65,6 56,5 4 50,40 40 KHBK-G/4 0 G/ ,5 08,5 4, 90 70, ,6 50 KHBK-G/ 40 5 G/ ,5 4,7 4,5 96, ,04 50 DIN 5 Light range KHBK-G G ,5 59, ,48 50 KHBK-06LR Mx, ,7 4 7,5 9 0,0 500 KHBK-08LR M4x, ,7 4 7,5 9 0,0 500 KHBK-0LR M6x,5 7,9 4 5, 7, 40 8, , KHBK-LR 0 0 M8x,5 7,9 4 5, 7, 40 8, , KHBK-5LR 5 Mx, , 7, 40 8, ,7 500 KHBK-8LR 8 M6x, , 7, 40 8, , KHBK-8LR M6x, , ,76 40 KHBK-LR 0 9 M0x 4 00, ,8 7,5 60,6 50,5 4 4,54 40 KHBK-8LR M6x 4 07, ,6 9,5 65, ,00 40 KHBK-5LR 0 5, M45x ,5 4, ,48 50 DIN 5 Heavy range KHBK-4LR , M5x ,7 4,5 96, 74, ,0 50 KHBK-08SR M6x, , ,5 9 0, 500 KHBK-0SR M8x,5 7, , ,5 9 0,4 500 KHBK-SR 8 8 M0x,5 75,9 4 5, 7, 40 8, , KHBK-4SR Mx,5 4 79,9 4 5, 7, 40 8, ,5 500 KHBK-6SR 6 M4x,5 4 85, , 7, 40 8, , KHBK-0SR 0 M0x , 7, 40 8, ,7 500 KHBK-0SR M0x , ,8 40 KHBK-5SR M6x 8 08, ,8 7,5 60,6 54,5 4 4,66 40 KHBK-0SR M4x 0 9, ,6 9,5 65, ,7 40 ANSI B.0. NPT female thread KHBK-8SR 0 8, M5x ,5 4, ,48 50 KHBK-06NPT 6 8 /4-8 NPT 0, , ,5 9 0, KHBK-0NPT 0 0 /8-8 NPT 0,6 7,9 4 5, 7, 40 8, , KHBK-6NPT /-4 NPT, , 7, 40 8,5 4, ,7 500 KHBK-6NPT 6 5 /-4 NPT, , ,5 0,85 40 KHBK-0NPT 0 0 /4-4 NPT,86 94, ,8 7,5 60,6 47,5 4 4,6 40 KHBK-5NPT / NPT 7, ,6 9,5 65,6 56,5 4 50,9 40 KHBK-NPT 0 /4- / NPT 7, ,5 4, ,78 50 KHBK-40NPT 40 5 /- / NPT 8, ,5 4,7 4,5 96, ,60 50 SAE J 54 UN/UNF Female thread KHBK-50NPT / NPT 9, ,5 59, ,50 50 KHBK-06SAE 6 8 7/6-0 UNF , ,5 9 0,6 500 KHBK-0SAE 0 0 9/6-8 UNF 7,9 4 5, 7, 40 8, , KHBK-6SAE 6 5 /4-6 UNF , ,5 0,85 40 KHBK-0SAE 0 0 /6- UN 0 94, ,8 7,5 60,6 47,5 4 4,54 40 KHBK-5SAE 5 5 5/6- UN ,6 9,5 65,6 56,5 4 50,0 40 KHBK-SAE 0 5/8- UN ,5 08,5 4, 90 70, ,60 50 KHBK-40SAE /8- UN ,7 4,5 96, 75, ,08 50 KHBK-50SAE /- UN ,5 8,5 59,8 0 85, , 50 E /.6 9
4 Stainless steel Connection type Type DN LW RA d i L L B H h h h S SW SW Weight Nom. PN DIN ISO 8 Female thread [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg] [bar] KHBK-G/8 4 8 G/ , 4,5,5 7 4,5 9 0,4 500 KHBK-G/4 6 8 G/ , 4,5,5 7 4,5 9 0, KHBK-G/8 0 0 G/ , 7, 40 8, ,6 500 KHBK-G/ 0 G/ , 7, 40 8,5 4, , KHBK-G/ 6 5 G/ 6 8, ,7 0,5 46,5 4,5, KHBK-G/4 0 0 G/ ,8 7,5 60,6 47,5 4 4,90 50 DIN 5 Light range KHBK-G 5 5 G 0,5, ,6 9,5 65,6 56,5 4 50,40 50 KHBK-06LR Mx, , 4,5,5 7,5 9 0,6 500 KHBK-08LR M4x, , 4,5,5 7,5 9 0,6 500 KHBK-0LR M6x,5 7, , 7, 40 8, ,7 500 KHBK-LR 0 0 M8x,5 7, , 7, 40 8, ,7 500 KHBK-5LR 0 5 Mx, , 7, 40 8,5 4, , KHBK-8LR 0 8 M6x, , 7, 40 8, ,9 500 KHBK-8LR M6x,5 8, ,7 0,5 46,5 4 0, KHBK-LR 0 9 M0x 4 00, ,8 7,5 60,6 50,5 4 4,0 50 DIN 5 Heavy range KHBK-8LR M6x 4 07, ,6 9,5 65, , 50 KHBK-08SR M6x, , 4,5,5 7 6,5 9 0,9 500 KHBK-0SR M8x, , 4,5,5 7 6,5 9 0,9 500 KHBK-SR 8 8 M0x,5 75, , 7, 40 8, , KHBK-4SR Mx,5 4 79, , 7, 40 8, , KHBK-6SR 0 6 M4x,5 4 80, , 7, 40 8,5 40, ,9 500 KHBK-0SR 0 0 M0x , 7, 40 8,5 4,5 9,0 500 KHBK-0SR M0x 6 89, ,7 0,5 46,5 45, KHBK-5SR M6x ,8 7,5 60,6 54,5 4 4,0 50 KHBK-0SR M4x 0 9, ,6 9,5 65, ,40 50 E /.6 9
5 Fixing hole dimensions (SO 940) SW (spindle square) DIN ISO 8 Ød DN SW a b M t c G / M4 6 8 G/ M4 6 8 G / M5 7 9 G /* 9 6 M5 7 9 G / M5 7 9 G / M6 9 G M6 9 DIN 5 Light Range Ød DN SW a b M t c 06LR M LR M LR M5 7 9 LR M LR* 9 6 M LR* 9 6 M LR M5 7 9 LR M6 9 8LR M6 9 DIN 5 Heavy Range Ød DN SW a b M t c 08SR M SR M4 6 8 SR M SR M SR* 9 6 M SR* 9 6 M SR M SR M6 9 0SR M6 9 Through hole dimensions (SO 07) DIN ISO 8 Ød DN L L B H h h a Øb c A G / , ,5 4,5 08 G/ , ,5 4,5 08 G /8 0 7,9 4 7,7 7, 40 5, G /* ,7 7, 40 5, G / , G /4 0 94, , , G 5, , , DIN 5 Light Range Ød DN L L B H h h a Øb c A 08LR , ,5 4,5 08 0LR 8 7,9 4 7,7 7, ,5 4,5 08 LR 0 7,9 4 7,7 7, 40 5, LR* ,7 7, 40 5, LR , LR 0 00, , , LR 5 07, , , DIN 5 Heavy Range Ød DN L L B H h h a Øb c A 08SR , ,5 4,5 08 0SR , ,5 4,5 08 SR 8 75,9 4 7,7 7, 40 5, closed open 4SR 0 79,9 4 7,7 7, 40 5, SR* 85, ,7 7, 40 5, SR* ,7 7, 40 5, SR , SR 0 08, , , SR 5 9, , , * reduced bore E /.6 9
6 SPARE PARTS (SEAL KIT) NOTE The information in this brochure relates to the operating conditions and applications described. For applications and operating conditions not described, please contact the relevant technical department. The operator is always responsible for determining the product suitability for the specific application. Quantified values for product characteristics are average values for a new product that undergo a time deterioration process. Subject to technical modifications and errors. Seal kit Order No. = Part No. DN 04/ DN 08/ DN DN / DN DN The parts indicated by numbers in the above drawing are contained in the seal kit. E /.6 94 HYDAC Accessories GmbH Hirschbachstr Sulzbach/Saar Tel.: +49 (0) Fax: +49 (0) Internet: info@hydac.com
3- and 4-Way Ball Valves KH3/KH4
3- and 4-Way Ball Valves KH3/KH4 up to 500 bar up to DN 20 KH3 KH4 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, HYDAC 3/2 and 4/2 way ball valves are units which shut off and divert the flow of an
ay Manifold Mounted KHP3K
3-Way ay Manifold Mounted Ball Valves KHP3K up to 500 bar up to DN 32 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, FLUTEC 3/2-way manifold mounted ball valves are units for shutting off and diverting
Flanged Ball Valves KHBF / KHMF / KHMFF
Flanged Ball Valves KHBF / KHMF / KHMFF Model code (also order example) KHBF 16 PN040 11141 02 X... Designation KHBF = Block-type ball valve DN 16-25 (steel) KHMF = Sleeve-type ball valve DN 32-50 (steel)
Isolator Sandwich Plate
Isolator Sandwich late CEO Model code (also order example) KH4K DN10 CEO 5302 09 X Symbol DN 06 Designation KH4K = 4-gallery isolator ball valve KH6K = 6-gallery isolator ball valve Nominal bore DN06 DN10
Ball Valves Gemels GE2 2-WAY HIGH PRESSURE BALL VALVES. Type and way of valve GE2 2-way high pressure ball valves
Stainless Steel Ball Valves Gemels 34.1.1 GE2 2-WAY HIGH PRESSURE BALL VALVES GE2 stainless steel GE2 G 1/2 DN13 4 4 4 4 A B Type and way of valve GE2 2-way high pressure ball valves Valves dimension of
2/2-Way Pressure Relief Valve CX DBV (Right-Angle Design)
2/2-Way Pressure Relief Valve CX DBV (Right-Angle Design) CX DBV-E Model code (also example order) CX DBV 12 120 G1 F P 24V Type CX DBV = Pressure relief valve Nominal size 10 = DN 10 12 = 15 = 20 = CX
Suction Filter SF/SFM/SFF and Suction Filter Elements S/S..
Suction Filter /M/F and Suction Filter Elements S/S.. up to 500 l/min Filters: 60 110 160 240 330 M 330 F 400 F 500 Elements: S SH. SU. SG. 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The
Hydraulic & Offshore Supplies GE3 3-Way High Pressure Ball Valves Brochure YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE www.gemels.it
GE2 G 1/2 DN A B
GE2 +GE2 CARBON STEEL Type: ball valve GE 2 way Body: block Material: 1,0737 Ball seats: from DN4 up to DN25 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 500 Bar depending on valve size and seal s
Suction Filter SF/SFM/SFF and Suction Filter Elements S and S..
Suction Filter /M/F and Suction Filter Elements S and S.. up to 500 l/min Filters: 60 100 160 240 330 M 330 F 400 F 500 Elements: S SH. SU. SG. 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
Inline filters NF NF 1350 NF 330 NF 750 NF 500 NF FILTER SPECIFICATIONS Nominal pressure
Inline filters up to 3500 l/min, up to 25 bar 160 240 280 330 500 750 950 1350 2650 on request 1310 2.x on request 2610 2.x 1340 2640 5240 7840 10440 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
Change-Over Pressure Filter DFDK
Change-Over Pressure Filter up to 2500 l/min, up to 315 bar 30 60 110 140 160 240 280 330 500 660 1.x 660 2.x 990 2.x 1320 2.x 1320 3.x 2640 3.x 3960 3.x 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
up to size 381 up to PN 0.5 bar up to T = 80 C Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TSE
up to size 381 up to PN 0.5 bar up to T = 80 C Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TSE 1. DESCRIPTION 1.1. GENERAL HYDAC fluid level gauges FSA, fluid level sensors FSK
HIGH PRESSURE BALL VALVES
HIGH PRESSURE BALL VALVES HIGH PRESSURE BALL VALVES TABLE OF CONTENTS Page Description 3 Valve Design 3 Product Features 3 Available Options 3 2-Way with NPT and SAE Connections 4 2-Way with SAE Split
Change-Over Inline Filter RFLD Welded Version
Change-Over Inline Filter RFLD Welded Version up to 15000 l/min, up to 16 bar RFLD 1300 CAS to RFLD 15000 CBW 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed
Table of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
Change-Over Inline Filter AFLD to API 614
Change-Over Inline Filter to API 614 up to 17 l/min, up to 4 bar 112/ 113 122/ 123 232/ 233 242/243 332/333 52/53 542/543 882/883 142/143 272/273 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
Change-Over Inline Filter RFLD Weld Version
Change-Over Inline Filter RFLD Weld Version up to 15000 l/min, up to 16 bar RFLD 1300 CAS to RFLD 15000 CBW 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The fi lter housings are designed
Return Line Filter HF4R up to 450 l/min, up to 10 bar
Return Line Filter HF4R up to 450 l/min, up to 10 bar 9" 18" 27" 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed in accordance with international regulations.
2/2 way Coaxial valve CXRM compact, pilot operated Modular design
2/2 way Coaxial valve CXRM compact, pilot operated Modular design Model code (also example order) CXRM 2/2 F C 2 08 040 038 V Standard NC (closed when de-energised) With external 3/2-way pilot valve 4
Inline Filter RFLD. Change-Over. Cast Version Flow Rates up to 1300 l/min* Pressure Range 25/40/64 bar With Ball Change-Over Valve E /01.
Change-Over Inline Filter RFLD Cast Version Flow Rates up to 3 l/min* Pressure Range 25/4/64 bar With Ball Change-Over Valve * For higher flow rates, please refer to brochure RFLD Welded Version E 7.9.2/.4
Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX
Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX up to 2000 l/min, up to 420 bar DF/DFF...1.X/2.X 30 60 110 140 160 240 280 330 500 660 990 1320 1500 2000 3000 4000 DF...3.X DFFX...1.X/2.X
Feed Pumps VP / VPB / VPBM
Feed Pumps VP / VPB / VPBM Symbol General The feed pumps from the VP series are low-noise, single-stroke vane pumps with constant flow rate. Using a damped bell housing (PT) enables noise levels to be
Pressure Filter DF...K P, DF...M P, Flange Mounted
Pressure Filter, DF...M P, Flange Mounted up to 550 l/min, up to 260 bar DF...M P 330...1.X 160 240 280 500...1.X 660...1.X 660...2.X 990...2.X 1320...2.X 660...3.X 990...3.X 1320...3.X 1. TECHNICAL SPECIFICATIONS
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland
HYDAC Fluidtechnik: Industrial Valves FLOW CNTROL VALVE COMPENSATED PRESSURE VP-SR X.XXX.0/01.09 E / D E /08.
HYDAC Fluidtechnik: Industrial Valves FLOW CNTROL VALVE COMPENSATED PRESSURE VP-SR D E 2.902.0/08.09 X.XXX.0/01.09 E 5.101.0/ 08.09 1 up to 250 bar up to 30 l/min Flow control valve with integrated pressure
BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
Catalogue 6 STAUFF Valves
Two-Way Ball Valves Multi-Way Ball Valves Flow Control and Check Valves Gauge Isolator Valves Catalogue 6 STAUFF Valves Germany Walter Stauffenberg GmbH & Co. KG Im Ehrenfeld 4 58791 Werdohl Tel.: +49
Return Line Filter RF
Return Line Filter up to 15000 l/min, up to 25 bar 30 60 110 160 240 330 450 580 660 950 1300 2500 4000 5200 6500-7800 15000 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings
Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF
Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF up to 600 l/min, up to 315 bar 60 110 140 160 240 280 330 500 660 1.X 660 2.X 990 1320 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
Angle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
MultiRheo Filter MRF 1/2/3/4/5/6/7
MultiRheo Filter MRF 1/2/3/4/5/6/7 Description The MultiRheo filters of the MRF series are filter housings for use in open systems which are continually exposed to contamination. The candle filter elements
MultiRheo Filter MRF 1/2/3/4/5/6/7
MultiRheo Filter MRF 1/2/3/4/5/6/7 Description The MultiRheo filters of the MRF series are filter housings for use in open systems which are continually exposed to contamination. The candle filter elements
Safety Equipment for Hydraulic Accumulators
Safety Equipment for Hydraulic Accumulators 1. DESCRIPTION 1.1. General Hydraulic accumulators are pressure vessels for the purpose of the PED97/23/EC and as such their manufacture is subject to the statutory
Return line and Suction Boost Filter RKM
Return line and Suction Boost Filter up to 850 l/min, up to 10 bar 80 100 120 151 201 251 201/-TH 300 350 400 800 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed
IGATEC - Standard - Swivel Joints
IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International
OVERVIEW OF VALVES. Overview of Valves A-1 PN# / / ACC
OVERVIEW OF VALVES Overview of Valves A-1 OVERVIEW OF VALVES Quick Reference Guide of Valves Section Type Series Product Size Pressure Rating Pg. No. KHB, KHM Ball Valves with NPT and SAE Threaded Connection
Inline Filter LPF D A Flange-Mounted up to 280 l/min, up to 25 bar
Inline Filter LPF D A Flange-Mounted up to 280 l/min, up to 25 bar 160 240 260 280 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed in accordance with international
Inline Filters NF. Flow rates up to 3,500 l/min Pressure range 25 bar Material: Aluminium / Aluminium-Cast Iron
NF filters are designed for inline mounting and as tank-top mounted return line filters. These filters can also be used on filling, flushing and off-line units. Inline Filters NF Flow rates up to 3,500
TECHNICAL CATALOGUE BALL VALVES: VIENNA
TECHNICAL CATALOGUE BALL VALVES: STANDARD LOW BALL VALVES: Suitable for domestic water ServiceS, heating, airconditioning plants and compressed air SyStemS. BALL VALVES 116 BALL VALVE, STANDARD LOW size
Angle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
Angle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
Piston Accumulators High pressure
Piston Accumulators High pressure 1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in hydraulic accumulators
Standard Specifications. Fluid Standard specifications. VH600 Ambient and fluid temperature Operating angle Lubrication. Optional Specifications
Hand Valve Series Standard Specifications Fluid Standard specifications Max.operating,, pressure Ambient and fluid temperature Operating angle Lubrication Air.5MPa.MPa MPa 5 to C (No freezing) 9 Not required/when
Full Bore Diaphragm Valve, Metal
Full Bore Diaphragm Valve, Metal Construction The GEMÜ motorized 2/2 way full bore diaphragm valve is fitted with a motor/control units made by AUMA. Features Optional rubber lining particularly suitable
BALL VALVES FILTERS TEST POINTS 8
BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves
BALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
Return Line Filter RFM with 4-Hole Mounting
Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 210 270 330 500 600 661 851 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
Piston Accumulators High pressure
Piston Accumulators High pressure 1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in hydraulic accumulators
Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
VJO1-06/S. Functional Description HA /2010. Check Valves. Replaces HA /2008. Size to 06 (1/4) bar (4600 PSI)...20 L/min (5.
Check Valves VJO1-06/S Size to 06 (1/4)...320 bar (4600 PSI)...20 L/min (5.3 GPM) HA 5004 11/2010 Replaces HA 5004 4/2008 Small dimensions Two models Poppet design Leak-free closure in one direction VJO1-06/Sx-1
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
Plastic Tank Systems Standard models
Plastic Tank Systems Standard models Basic version 5 litres 70 litres Premium version 5 litres 70 litres. TECHNICAL SPECIFICATIONS. PLASTIC TANK SYSTEMS When ordering tank systems, the customer receives
CATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.
CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which
Angle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated
Bell Housings with Rigid / Flexible Pump Mounting PTS / PT
Bell Housings with Rigid / Flexible Pump Mounting PTS / PT 1. Description 1.1. General Bell housings are connection elements between drive motors and hydraulic pumps. Both connecting flanges are supplied
Angle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
TABLE OF CONTENTS. Ball Valves
bal lval ves TABLE OF CONTENTS Ball Valves High Pressure, 2 Way 3 High Pressure,3 Way 4 High Pressure, Handles 5 Locking Kit 5 Low Pressure, Brass & Stainless Steel 6 Mini 5 HIGH PRESSURE BALL VALVES -
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
Return Line Filter RFM with 4-Hole Mounting
Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 195 210 270 330 500 600 661 851 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
Globe Control Valve, Metal
Globe Control Valve, Metal Construction The GEMÜ /-way globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos positioners or the
Angle Seat Control Valve 7020
Angle Seat Control Valve 72 DN 8 up to DN 8 PN 4 Pneumatically operated control valves for neutral through to highly aggressive media. Integrated positioner Compact design All parts contacting the fluid
One-way flow control valves GR/GRA, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal One-way flow control function Pneumatic connection 1 GR/GRA
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
Metal Bellows Accumulators for Heavy Diesel Engines
Metal Bellows Accumulators for Heavy Diesel Engines 1. DESCRIPTION In the fuel injection system of heavy diesel engines (e.g. marine engines and engines for power plants / two and four-stroke), pressure
Angle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
GEMÜ 549 esydrive Motorized globe valve
esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via
Conditioning Module Reservoir Extraction CM-RE
Conditioning Module Reservoir Extraction CM-RE Description The ConditioningModule Reservoir Extraction CM-RE is designed as an accessory to the CS ContaminationSensors and the FCU FluidControl Units. The
What's in a ball valve?
Ball valves What's in a ball valve? An efficient and reliable process demands quality products. This includes the important function of flow isolation. If inferior products are used, breakdowns and expensive
2018 High Performance Check Valves for liquid and gaseous media
2018 High Performance Check Valves for liquid and gaseous media Check valves Catalogue 45 Date: 04/2018 WEH - We Engineer Hightech All rights reserved, WEH GmbH 2018. Unauthorized copies are strictly forbidden
Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
NON-RETURN VALVE RT25
NON-RETURN VALVE RT25 DESCRIPTION The RT25 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate. Connections are female screwed MAIN
Process Inline Filter Medium / High Pressure PFM / PFH
Process Inline Filter Medium / High Pressure PFM / PFH PFx-0 PFx-1 PFx-2 PFx-3 Specifications Connection: G 1 Q S max: 8 m 3 /h p S max: 100 bar Filtration ratings: 1 2000 µm 1. GENERAL Product description
Automatic back-flushing filter AutoFilt RF4
Automatic back-flushing filter AutoFilt RF4 RF4-1 RF4-2 Specifications Nominal size: G1 G 1½ Q max: 220 l/min p max: 16 bar Filtration ratings: 30 1000 µm 1. GENERAL Product description Self-cleaning automatic
BALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
Hydraulic Valves Needle Valves
Table of Contents 1 Hydraulic Valves Needle Valves TMN Series FFG 2000 Series FFA 2000 Series 2-3 4-5 6-7 Check Valves C Series 8-9 Flow Controls TMF Series 10-11 Low Pressure Ball Valve S95 NPT Series
DA/SR. Pneumatic Rotary Actuators FEATURES VALBIA ISO 9001 CERTIFIED
VALBIA ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
Safety Equipment for Hydraulic Accumulators
Safety Equipment for Hydraulic Accumulators 1. DESCRIPTION 1.1. GENERAL Hydraulic accumulators are pressure equipment, as defined by the European Pressure Equipment Directive (PED), and as such their manufacture
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T Reversible pneumatic actuator
653, 654. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 653 / 654 manually operated 2/2-way metal diaphragm valve has a stainless steel bonnet and is available in two versions - GEMÜ 653 has a handwheel in high temperature
Pressure control valve Type KDC
Data sheet Pressure control valve Type KDC 65-00 The KDC valve is a pressure control valve. The valve controls the discharge pressure of the compressor to ensure fast build-up of pressure and lubrication
Hydraulic Accessories
Hydraulic Accessories Valves, Clamps, & Reservoir Accessories DRAFT /13/3 About HYDAC HYDAC stands for worldwide presence and accessibility to the customer. HYDAC has over 1 distributors worldwide and
Series 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
Inline Filter RFL. Cast version Volume rates up to 1300 l/min* Pressure range 25/40 bar
RFL inline filters are designed for inline mounting in hydraulic and lubrication systems. Inline Filter RFL Cast version Volume rates up to 1300 l/min* Pressure range 25/40 bar * For larger flow rates,
GEMÜ 539 esydrive Motorized globe valve
esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via
Valves. Model Code Breakdown. Valves. Steel High Pressure Steel Ball Valves. Steel High Pressure Steel Ball Valves
Steel Ball Steel Ball Model Code Breakdown AB2 N1-1/2 _ 1 1 D B Valve Series Connection Type/Size N NPTF Pipe Thread S SAE Straight Thread Adapter & Stem Seals B Buna - Standard V Viton Bore Restriction
Safety & Shut-off Blocks
SAF Series Safety & Shut-off Blocks Construction The Safety and Shut-off Block consists of a valve block, a built-in pressure relief valve, a main shut-off valve, and a manually operated bleed valve. In
Filters. HF4R Series. Service and Parts. Index. Inlet. Outlet. ø7 (ø177.8mm) Bolt Circle ø6.25 (ø158.8mm) ø0.44 (ø11.1mm) 4 Places Equally spaced
ø7 (ø177.8mm) Clearance Required for Element Removal HF4R-9 10 (254mm) HF4R-18 19 (487mm) HF4R-27 28 (711mm) 2.38 (60.4mm) 4.26 (108.1mm) Filters G 1/2 Indicator Port HF4R Series 1/8 NPT Indicator Port
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
Process Multi-Rheo Filter PMRF
Process Multi-Rheo Filter PMRF PMRF-1 PMRF-2 PMRF-3 PMRF-5 PMRF-6 PMRF-7 1. Technical Specifications 1.1 General The filter series PMRF (for duplex filters see PMRFD) Process Multi- Rheo Filter completes
ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T. Electric actuator ARI-PREMIO 2,2-25 kn ARI-PREMIO-Plus 2G 2,2-25 kn
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
Safety Shut-off Valve SL/SID/RSL
Safety Shut-off Valve SL/SID/RSL High accuracy shut-off Low pressure loss Operating temperature up to -30 C Easy maintenance DVGW-approval Applications They are designed for transmission and distribution
Plate Heat Exchangers
Plate Heat Exchangers General Plate heat exchangers are used wherever thermal energy (heat) has to be transferred from one fl uid to another. The advantage is that they can maintain the fl uid temperature
Selector Valve RV 713
Selector Valve RV 713 Key valve features RV 713 is a 3 way selector valve designed for flows up to 42gpm (160 Lpm) and max. operating pressures up to 3,625 psi (250 bar). Spools, both 2 and 3 position,
Ball Sector Valve 4040
DN 5 up to DN 3 DN 5 up to DN3 High Kvsvalues up to 384 xcellent control characteristics Suitable for abrasive media asily exchangeable seat ring Low maintenance Actuators can be easily fitted fficient
Ball Valve VM Options. General. Modular selection of system components. steel or stainless steel DN PN 100/40 flanges
Ball Valve VM 4460-4466 steel or stainless steel DN 15-200 PN 100/40 flanges General 2-piece ball valve with a unique sealing element design. Modular selection of system components. Supports pressurization