HYDAC Fluidtechnik: Industrial Valves FLOW CNTROL VALVE COMPENSATED PRESSURE VP-SR X.XXX.0/01.09 E / D E /08.
|
|
|
- Ross McCormick
- 6 years ago
- Views:
Transcription
1 HYDAC Fluidtechnik: Industrial Valves FLOW CNTROL VALVE COMPENSATED PRESSURE VP-SR D E /08.09 X.XXX.0/01.09 E /
2 up to 250 bar up to 30 l/min Flow control valve with integrated pressure compensator subplate VP-2SR6 FEATURES - Hole pattern to ISO , Nominal size 6 - Adjustable flow control valve subplate mounting for flow control in one direction and full backflow in the opposite direction - Independent from pressure by integrated pressure compensator - Adjustable by turning knob FUNCTION SPECIFICATIONS Operating pressure: max. 250 bar Minimal pressure difference: max. 10 bar between A and B Flow rate: max. 0,5 /1 /4 /10 /16 /22 /30 l/min max. 40 l/min by the check valve (cracking pressure 0,5 bar) Minimal adjustable Flow rate: 0,025 l/min Operating fluid: hydraulic oil to DIN part 1 and 2 Operating fluid temp. range: -20 C up to max. +80 C Ambient temperature range: -20 C up to max. +50 C Viscosity range: 7,4 400 mm²/s is recommended Filtration: Class 20/18/15 according to ISO 4406 Weight: 1,3 kg flow control (measured at 36 mm²/s and 50 C) DIAGRAMS B -> A Pressure drop Prospekt Nr /09.09
3 Standard models Part No. VP-2SR6 D05SR-S01/N VP-2SR6 D1SR-S01/N VP-2SR6 D4SR-S01/N VP-2SR6 D10SR-S01/N VP-2SR6 D16SR-S01/N VP-2SR6 D22SR-S01/N VP-2SR6 D30SR-S01/N Other types on request DIMENSIONS MODEL CODE Name and size 2-way flow control valve nominal size 6 Curve D = degressive Flow rate code 05 = 0,5 l/min 1 = 1 l/min 4 = 4 l/min 10 = 10 l/min 16 = 16 l/min 22 = 22 l/min 30 = 30 l/min turning knob with scale Check valve R (cracking pressure 0,5 bar) Type S01 = Standard Seal material V = Viton (Standard) N = NBR VP-2SR6 D 05 S R S01 / V 1) Mounting plate with O-rings: 2x 14 x 2 NBR (Mat ) 2) Turning knob (3 turns) by turning clockwise the flow is rising 3) Regulation steps of the turning knob 4) Fastening screw of the turning knob Fastening screws: 4x Allen key M5x75 Torque: 5 Nm + 0,5 Nm All dimensions in mm. Fastening elements are not in the scope of delivery. Mounting plate to ISO *-97 Annotation The information in this brochure relates to the operating conditions and applications described. For applications or operating conditions not described, please contact the relevant technical department. Subject to technical modifications. Address: HYDAC Fluidtechnik Street Justus-von-Liebig-Str. 5 City Sulzbach / Saar Tel / Fax / flutec@hydac.com
4 Flow Regulator pressure-compensated Subplate to ISO6263 VP-2SR10 SYMBOL FEATURES - Hole pattern to ISO , Nominal size 10 - Adjustable flow control valve subplate mounting for flow control in one direction and full backflow in the opposite direction - Independent from pressure by integrated pressure compensator - Adjustable by turning knob Up to 320 bar Up to 70 l/min FUNCTION SPECIFICATIONS Operating pressure: max. 320 bar Minimal pressure difference: max. 10 bar between A and B Flow rate: max. /22 /38 / 70 l/min Minimal adjustable Flow rate: 0,05 l/min Operating fluid: hydraulic oil to DIN part 1 and 2 Operating fluid temp. range: -20 C up to max. +80 C Ambient temperature range: -20 C up to max. +50 C Viscosity range: mm²/s is recommended Filtration: Class 20/18/15 according to ISO 4406 or cleaner Weight: 3,6 kg Cracking pressure of check: 0,5 bar PERFORMANCE measured at = 36 mm²/s and T oil = 50 C Flow control (measured at 36 mm²/s and 50 C) Pressure drop B -> A E /01.13
5 Standard models Part No. VP-2SR10 D22SR S01/V VP-2SR10 D38SR S01/V VP-2SR10 D70SR S01/V Other models on request MODEL CODE Name and size 2-way flow control valve nominal size 10 Curve D = degressive VP-2SR10 D 22 S R S01 / V Flow rate code 22 = 22 l/min 30 = 30 l/min 70 = 70 l/min Turning knob with scale Check valve R (cracking pressure 0,5 bar) Type S01 = Standard DIMENSIONS Seal material V = FKM (Standard) N = NBR 1) Turning knob (6 turns) by turning clockwise the flow is rising 2) Mounting plate with O-rings: 2x 15,06 x 2,62 FKM 3) Display 5) Fastening screw of the turning knob Fastening screws: 4x allen key M8x Torque: 20 Nm + 2 Nm All dimensions in mm. Fastening elements are not in the scope of delivery. Mounting plate to ISO *-97 B A Annotation The technical information in this brochure are relating to the operating conditions and applications. At deviant applications and/or operating conditions please contact the technical dept. Technical information are subject to technical modifications. HYDAC Fluidtechnik GmbH Justus-von-Liebig-Str Sulzbach / Saar Tel.: / Fax: / flutec@hydac.com
Industrial Valves Check Valve ZW RV / ZW RP - Modular
HYDAC Fluidtechnik: Industrial Valves Check Valve ZW RV / ZW RP - Modular D E 2.902.0/08.09 X.XXX.0/01.09 E 5.101.0/ 08.09 1 Check valve as sandwich plate housing ZW-RV06 Up to 350 bar Up to 50 l/min Symbols
Industrial Valves Flow Control Valve ZW SDR - Modular
HYDAC Fluidtechnik: Industrial Valves Flow Control Valve ZW SDR - Modular D E 2.902.0/08.09 X.XXX.0/01.09 E 5.101.0/ 08.09 1 Flow control valve non return as sandwich plate housing ZW-SDR06 Pmax = 350
4/3-Proportional Solenoid Valve direct acting with integrated Electronics Subplate to ISO4401 P4WEE 10
4/3-Proportional Solenoid Valve direct acting with integrated Electronics Subplate to ISO4401 P4WEE 10 SYMOL E a P T b FETURES High flow rate due to optimized casted housing Low hysteresis by super finish
HYDAC (Three-Phase Current) Compact Power Units CO1
HYDAC (Three-Phase Current) Compact Power Units CO1 Up to 250 bar Up to 20 l/min In accordance with EN 60034-1 suitable for: Short-term operation: S2 = 5 min* (average value) Intermittent operation: S3
HYDAC DC Compact Power Units DC1
HYDAC DC Compact Power Units DC1 up to 250 bar up to 18.4 l/min In accordance with EN 60034-1 suitable for short-term operation 981 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL Very low noise level due to special
Proportional Pressure Reducing Valve PDM08130
Proportional Pressure Reducing Valve PDM08130 up to 80 bar up to 10 l/min Cartridge valves Control electronics Connection housings 486 1. DESCRIPTION 1.1. GENERAL According to DIN-ISO 1219, HYDAC proportional
Pilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P
Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate
Double throttle check valve Type Z2FS 10
RE 7 58/0.03 Replaces:.0 Double throttle check valve Type ZFS 0 Nominal size 0 Series 3X Maximum operating pressure 35 bar Maximum flow 0 L/min Overview of contents Contents Page Features Ordering details
3- and 4-Way Ball Valves KH3/KH4
3- and 4-Way Ball Valves KH3/KH4 up to 500 bar up to DN 20 KH3 KH4 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, HYDAC 3/2 and 4/2 way ball valves are units which shut off and divert the flow of an
Mobile Filter Unit MFU-15
Mobile Filter Unit MFU-15 Description The MFU 15 MobileFiltration unit is used as a portable service unit for filling hydraulic systems, flushing small hydraulic systems as well as for cleaning in bypass
LowViscosity Housing Filter LVH-F
LowViscosity Housing Filter LVH-F Description The LowViscosity-Housing Filter LVH-F is mainly used to filter low-viscosity fluids. It is especially suitable for applications with large amounts of dirt
3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
Pressure reducing valve, pilot operated Type DR
RE 6 9/0.0 Replaces: 0.0 Pressure reducing valve, pilot operated Type DR Nominal sizes 0 to Series Maximum operating pressure 0 bar Maximum flow 00 L/min K660-9 Type DR 0--/... Overview of contents Features
ISO cartridge valves type LIDD and LIQV Flow control, ISO 7368 sizes 16 63
Table H004/E ISO cartridge valves type LIDD and LIQV Flow control, ISO 78 sizes LIDD LIQV/K LIDD and LIQV are flow control valves not compensated, in ISO cartridge design, made by a functional cover and
Throttle check valve. Type Z2FS. Size 16 Component series 3X Maximum operating pressure 350 bar [5076 psi] Maximum flow 250 l/min [66 US gpm]
![Throttle check valve. Type Z2FS. Size 16 Component series 3X Maximum operating pressure 350 bar [5076 psi] Maximum flow 250 l/min [66 US gpm]](/thumbs/82/86214948.jpg "Throttle check valve. Type Z2FS. Size 16 Component series 3X Maximum operating pressure 350 bar [5076 psi] Maximum flow 250 l/min [66 US gpm]")
hrottle check valve ype Z2FS Size 6 Component series 3X Maximum operating pressure 350 bar [5076 psi] Maximum flow 250 l/min [66 US gpm] tb022 able of contents Content Page Features Ordering code 2 Symbols
Flow control valve. Rectifier plate. Type 2FRM5,10,16. Type Z4S5, 10, 16 01/ Sizes 5, 10 and 16 Up to 315 bar Up to 160 L/min
/ Flow control valve. Type FRM,, Rectifier plate Type ZS,, Sizes, and Up to bar Up to L/min Contents Function and configuration Specification Technical data Characteristic curves Unit dimensions - Features
MultiRheo Filter MRF 1/2/3/4/5/6/7
MultiRheo Filter MRF 1/2/3/4/5/6/7 Description The MultiRheo filters of the MRF series are filter housings for use in open systems which are continually exposed to contamination. The candle filter elements
Pressure Compensated Flow Control Valves SRVR/SRVRP
Pressure Compensated Flow Control Valves /P up to 210 bar up to 160 l/min Type 1. DESCRIPTION 1.1. GENERAL flow control valves with check function are, in accordance with DIN-ISO 1219, valves for oil hydraulic
Pressure reducing valve, pilot-operated. Type Z3DR. Contents. Features. RE Edition:
Pressure reducing valve, pilot-operated Type Z3DR RE 26874 Edition: 206-0 Size 0 Component series X Maximum operating pressure 350 bar Flow 20 l/min H8078 Features Sandwich plate valve Porting pattern
S.A. 193 Stefan Cel Mare str., 2400 Sibiu -Romania
S.A. H rd 193 Stefan Cel Mare str., 2400 Sibiu -Romania 1 240 l/min 315 bar Pressure control valves NG10,20,32 FC -9 GENERALITIES Pilot operated pressure control valves, available with/without by-pass
EIPS2 INTERNAL GEAR PUMPS
EIPS2 INTERNAL GEAR PUMPS Internal gear pump Type with constant displacement volume Characteristics Internal gear pump with axial and radial gap compensation Radial compensation with segments Pressure
Conditioning Module Reservoir Extraction CM-RE
Conditioning Module Reservoir Extraction CM-RE Description The ConditioningModule Reservoir Extraction CM-RE is designed as an accessory to the CS ContaminationSensors and the FCU FluidControl Units. The
Check valve, pilot operated
Check valve, pilot operated RE 21460/07.05 Replaces: 06.02 1/8 Types SV and SL Size 6 Component series 6X Maximum operating pressure 315 bar Maximum flow 60 l/min H6090 Table of contents Contents Page
Feed Pumps VP / VPB / VPBM
Feed Pumps VP / VPB / VPBM Symbol General The feed pumps from the VP series are low-noise, single-stroke vane pumps with constant flow rate. Using a damped bell housing (PT) enables noise levels to be
Inline Filter DMG DMG 080 DMG 045 DMG FILTER SPECIFICATIONS. Temperature range -10 C to +100 C Material of filter housing
Inline Filter Flow direction from in to out up to 250 l/min, up to 120 bar 020 045 080 150 250 1. TCHNICAL SPCIFICATIONS 1.1 FILTR HOUSING Design The filter housings are designed in accordance with international
VRN2-10. Functional Description HA /2008. Pilot Operated Pressure Reducing Valves. Replaces HA /2003
Pilot Operated Pressure Reducing Valves VRN2-0 HA 554 7/2008 Size 0 p max up to 20 bar Q max up to 50 (80) L/min Replaces HA 554 2/200 Screw-in cartridge valve for manifold mounting and stacking assemblies
up to size 381 up to PN 0.5 bar up to T = 80 C Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TSE
up to size 381 up to PN 0.5 bar up to T = 80 C Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TSE 1. DESCRIPTION 1.1. GENERAL HYDAC fluid level gauges FSA, fluid level sensors FSK
Proportional Pressure Reducing Valves Series PE*W (Parker), R4R (Denison)
Characteristics / Technical Data Series PE*W (Parker), RR (Denison) Subplate mounted proportional pressure reducing valves are available with both Parker (series PE*W) and Denison (series RR) model codes.
2-WAY FLOW CONTROL VALVE TYPE UDRD6
-WY FLOW CONTROL VLVE TYPE UDRD6 WK 0 00 NS6 up to 31,5 MPa up to 3 dm 3 /min WK 0 00 -way flow control valve type UDRD6 serves to control fluid flow rate independently of pressure and temperature in direction
Flow Control Valves and Flow Control Valves with reverse flow check DV/DRV
Flow Control Valves and Flow Control Valves with reverse flow check DV/DRV up to 350 bar up to 300 l/min 1. DESCRIPTION 1.1. GENERAL HYDAC flow control valves and flow control valves with reverse flow
Proportional Pressure Relief Valve Series RE*T
Characteristics The pressure relief valve series RE*T have a proportional solenoid operated pilot stage with integrated electronics and a cartridge main stage. Features Pilot-operated pressure relief valve
Check valve cartridge Type M-SR
RE /. Replaces:.9 Check valve cartridge Type M-SR Nominal sizes to Series X Maximum operating pressure bar Maximum flow L/min Overview of contents Contents Page Features Ordering details, symbols Preferred
MultiRheo Filter MRF 1/2/3/4/5/6/7
MultiRheo Filter MRF 1/2/3/4/5/6/7 Description The MultiRheo filters of the MRF series are filter housings for use in open systems which are continually exposed to contamination. The candle filter elements
Pressure Filter DF...K P, DF...M P, Flange Mounted
Pressure Filter, DF...M P, Flange Mounted up to 550 l/min, up to 260 bar DF...M P 330...1.X 160 240 280 500...1.X 660...1.X 660...2.X 990...2.X 1320...2.X 660...3.X 990...3.X 1320...3.X 1. TECHNICAL SPECIFICATIONS
Pressure reducing valve, pilot operated. Type DR. Features. Contents. RE Edition: Replaces: 02.03
Pressure reducing valve, pilot operated Type DR RE 293 Edition: 2013-01 Replaces: 02.03 Sizes 10 and 2 Component series 1X; 4X Maximum operating pressure 31 bar Maximum flow 10 l/min H792 Features Contents
VPN1-06. Functional Description HA /2008. Pilot Operated Pressure Relief Valves. Replaces HA /2002
Pilot Operated Pressure Relief Valves VPN-06 HA 56 4/2008 Size 06 p max up to 320 bar Q max up to 70 L/min Replaces HA 56 3/2002 Cartridge, modular and in-line design Five pressure ranges Two pressure
Pilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
LowViscosity Housing- Coalescer Diesel LVH-CD
LowViscosity Housing- Coalescer Diesel LVH-CD Description The LowViscosity Housing Coalescer LVH-C is mainly used for the dewatering of diesel. It is especially suitable for applications with large amounts
Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF
Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF up to 600 l/min, up to 315 bar 60 110 140 160 240 280 330 500 660 1.X 660 2.X 990 1320 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
Throttle check valve. RE 27518/10.07 Replaces: Type Z2FS
Throttle check valve RE 758/0.07 Replaces: 0.03 /8 Type ZFS Size 0 Component series 3X Maximum operating pressure 35 bar [4569 psi] Maximum flow 60 l/min [4.3 US gpm] H5556 Table of contents Content Page
Throttle check valve. Type Z2FS. Features. Content. RE Edition: Replaces: 04.08
hrottle check valve ype Z2FS RE 27526 Edition: 205-0 Replaces: 04.08 Size 6 Component series 3X Maximum operating pressure 350 bar [5076 psi] Maximum flow 250 l/min [66 US gpm] tb022 Features Sandwich
RC /
3 Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly Technologies Pneumatics Service utomation Mobile Hydraulics 09.96 DZ 10,, 3 31 bar 600 L/min K 663- DZ 0 --/31M 1 3 6 7 DIN
p max 350 bar Q max 50 l/min bar bar 50 Ports dimensions: P - port (pressure) T - port (drainage) T - port (drainage) A/B - port l/min
52 000/103 ED This series of modular subplates has been designed to make hydraulic circuits and can be used directly on power packs or on any other section of the machine. The subplates are assembled by
Pilot operated check valve
/06 Pilot operated check valve 1.8 Type SV / SL6...L6X Size 6 Up to 315 bar Up to 60 L/min Contents Function and configurations 0 Symbols 0 Specifications 03 Technical data 03 Characteristic curves 0 Unit
Throttle and throttle check valve
Throttle and throttle check valve RE 79/0.09 Replaces: 0.06 /6 Types MG and MK Size 6 to 0 Component series X Maximum operating pressure 5 bar Maximum flow 400 l/min K564- Table of contents Contents Page
Directional Control Valve Series 4D01 (DENISON)
Characteristics The Denison series 4D01 is a solenoid operated directional control valve size NG06 in -chamber design. It is direct operated by wet pin solenoids. The 4D01 is available with a Soft Shift
Spare Parts List Filter NFD Change-Over Version
Spare Parts List Filter Change-Over Version up to 1600 l/min, up to 5 bar 1340 640 540 7840 10440 1. MAINTENANCE GENERAL Please follow the maintenance instructions! 1. INSTALLATION Before fitting the filter
Return Line Filter HF4R up to 450 l/min, up to 10 bar
Return Line Filter HF4R up to 450 l/min, up to 10 bar 9" 18" 27" 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed in accordance with international regulations.
Connection Housings for Cartridge Valves
Standard Inline Bodies Sandwich Bodies Subplate Bodies Connection Housings for Cartridge Valves 571 INDEX HOUSING BROCHURE 1. DESCRIPTION 1.1. GENERAL 1.2. RECOMMENDATIONS 2. TECHNICAL SPECIFICATIONS 2.1.
6.3 SIZE 2. Ordering Code External Gear Pump
6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration
Twin throttle check valve
win throttle check valve RE 7506/05. Replaces: 0.03 /8 ype ZFS Size 6 Component series 4X Maximum operating pressure 35 bar Maximum flow 80 l/min H5556 able of contents Contents Page Features Ordering
Pilot operated pressure relief valve
0/06 ilot operated pressure relief valve.6 ype ZD/ ZD 6V..L4X Size 6 up to 5bar up to 60 L/min Contents Function and configuration 0 Symbols 0 Specification 0 echnical data 0 Characteristic curves 0 Unit
Inline Filter MFM. Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS / steel E /01.04
Inline Filter MFM Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS 400-15 / steel 1. TECHNICAL SPECIFICATIONS 1.1. FILTER HOUSING Construction The inline filter consists of a filter
Pressure relief valve, pilot-operated. Type ZDB and Z2DB. Contents. Features. RE Edition: Replaces: 10.05
Pressure relief valve, pilot-operated Type ZDB and ZDB RE 575 Edition: 06- Replaces: 0.05 Size 6 Component series 4X Maximum operating pressure 35 bar Maximum flow 60 l/min H7746 Features Sandwich plate
Pressure relief valve, pilot operated
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 46-5480 www.cmafh.com Pressure relief valve, pilot operated Types ZDB and ZDB Nominal size 6 Component series
Directional Control Valves
Overview HYDAC offers several functions of the Directional Control Cartridges. HYDAC Manually operated position, - way normally closed, spring return, directional valve features poppet design. It offers
IGP /117 ED INTERNAL GEAR PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
00/7 ED IGP INTERNAL GEAR PUMPS OPERATING PRINCIPLE IGP pumps are volumetric displacement pumps with internal gears, available in five sizes, each divided into a range of different displacement. The pumps
Throttle and throttle check valve
Throttle and throttle check valve RE 79/0.09 Replaces: 03.06 /6 Types MG and MK Size 6 to 30 Component series X Maximum operating pressure 35 bar Maximum flow 400 l/min K3564- Table of contents Contents
Pressure Relief Valve DB12 CE
Pressure Relief Valve DB12 CE up to 120 l/min Connection housings 1. DESCRIPTION 1.1. GENERAL According to DIN-ISO 1219, HYDAC pressure relief valves DB12-CE are valves for oil hydraulic systems to control
D4E DIRECT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 41
83 250/198 ED D4E DIRECT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP 05 p max 250 bar Q max (see performance ratings table) MOUNTING INTERFACE OPERATING
Directional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
Pressure reducing valve, direct operated. Type ZDR. Contents. Features. RE Edition: Replaces:
Pressure reducing valve, direct operated Type ZDR RE 657 Edition: 8-3 Replaces: 8- Size 6 Component series 4X Maximum operating pressure 35 bar Maximum flow 5 l/min H775 Features Sandwich plate valve Porting
Pressure reducing valve, pilot operated
Pressure reducing valve, pilot operated RE 685/.5 Replaces:. /6 Type DR K Size Component series X Maximum operating pressure 5 bar Maximum flow l/min K478/7 Table of contents Contents Page Features Ordering
Pressure relief valve, directly operated
1/16 ressure relief valve, directly operated RE 25722/1.9 Replaces: 11.7 Type ZDY D / Z2DY D Nominal size (NG) 6 and 1 Unit series 1X Maximum working pressure 315 bar Maximum flow rate 6 and 12 l/min T
Throttle check valve. Type Z2FS. Contents. Features. RE Edition: Replaces: 10.07
Throttle check valve Type ZFS RE 758 Edition: 06-0 Replaces: 0.07 Size 0 Component series 3X Maximum operating pressure 35 bar [4569 psi] Maximum flow 60 l/min [4.3 US gpm] H5556 Features Sandwich plate
Return Line Filter RF
Return Line Filter up to 15000 l/min, up to 25 bar 30 60 110 160 240 330 450 580 660 950 1300 2500 4000 5200 6500-7800 15000 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings
Pressure relief valve, direct operated. Type ZDBY D, Z2DBY D. Features. Contents. RE Edition: Replaces: 01.09
Pressure relief valve, direct operated ype ZDBY D, ZDBY D RE 5 Edition: -8 Replaces:.9 Size 6 Component series X Maximum operating pressure 35 bar Maximum flow 6 l/min tb3 Features Contents Sandwich plate
RSP 7-06 R S P FUNCTIONAL DESCRIPTION ORDERING CODE. DIRECTIONAL CONTROL VALVES KE /13 D n 06 p max 32 MPa Q max 80 dm 3 /min
DIRECTIONAL CONTROL VALVES KE 2053 07/13 D n 06 p max 32 MPa Q max 80 dm 3 /min Manually operated directional control valves of type RSP7 06 operated by hand lever are used to control start, stop and direction
Throttle check valve. RE 27526/04.08 Replaces: Type Z2FS
hrottle check valve RE 27526/04.08 Replaces:.02 /8 ype Z2FS Size 6 Component series 3X Maximum operating pressure 350 bar [5076 psi] Maximum flow 250 l/min [66 US gpm] tb022 able of contents Content Page
Return line and Suction Boost Filter RKM
Return line and Suction Boost Filter up to 850 l/min, up to 10 bar 80 100 120 151 201 251 201/-TH 300 350 400 800 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed
2-way flow control valve. Type 2FRM, 2FRH, 2FRW. Contents. Features. RE Edition: Replaces: 07.04
2-way flow control valve Type 2FRM, 2FRH, 2FRW RE 28389 Edition: 2013-05 Replaces: 07.04 Sizes 10 and 16 Component series 3X Maximum operating pressure 315 bar Maximum flow 160 l/min H5552 Features For
Proportional pressure reducing valve, pilot operated
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com Proportional pressure reducing valve, pilot operated Type DRE and ZDRE Size 6 Component
Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX
Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX up to 2000 l/min, up to 420 bar DF/DFF...1.X/2.X 30 60 110 140 160 240 280 330 500 660 990 1320 1500 2000 3000 4000 DF...3.X DFFX...1.X/2.X
Inline filters NF NF 1350 NF 330 NF 750 NF 500 NF FILTER SPECIFICATIONS Nominal pressure
Inline filters up to 3500 l/min, up to 25 bar 160 240 280 330 500 750 950 1350 2650 on request 1310 2.x on request 2610 2.x 1340 2640 5240 7840 10440 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b
DSH* /117 ED LEVER OPERATED DIRECTIONAL CONTROL VALVE MOUNTING SURFACES DSH3 ISO DSH5 ISO
41 600/117 ED DSH* LEVER OPERATED DIRECTIONAL CONTROL VALVE MOUNTING SURFACES DSH3 ISO 4401-03 DSH5 ISO 4401-05 p max (see performances table) Q nom (see performances table) OPERATING PRINCIPLE The DSH
Spare parts list Return line filter RFM with 2-hole attachment
Spare parts list Return line filter with 2-hole attachment Tank-top mounted version: up to 200 l/min, up to 10 bar 75 90 150 165 185 195 1. MAINTENANCE 1.1 GENERAL Please follow the maintenance instructions!
Valve Technology and Special Solutions for Transmissions on Mobile Machines
Valve Technology and Special Solutions for Transmissions on Mobile Machines Your partner for expertise in solutions specific to mobile transmissions Innovative and tailored valve solutions for modern mobile
IPVS High-pressure Internal Gear Pumps Technical Data Sheet
IPVS High-pressure Internal Gear Pumps Technical Data Sheet Functional Drawing 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial
Pressure reducing valve, direct operated
Pressure reducing valve, direct operated RE 6580/05.11 Replaces: 0.03 1/8 Type DR 10 DP Size 10 Component series 4X Maximum operating pressure 10 bar Maximum flow 80 l/min K4786/11 Table of contents Contents
5.2 MEDIUM HEAVY DUTY SERIES SIZE 3
.2 MEDIUM HEAVY DUTY SERIES SIZE 3 CONTENTS PGI101 Ordering Code.2.1 Medium Heavy Duty Series Technical Information.2.2 Specifications.2.3 Hydraulic fluids.2.4 Viscosity range.2. Temperature range.2.6
Suction Filter SF/SFM/SFF and Suction Filter Elements S/S..
Suction Filter /M/F and Suction Filter Elements S/S.. up to 500 l/min Filters: 60 110 160 240 330 M 330 F 400 F 500 Elements: S SH. SU. SG. 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The
Servo solenoid valves with on-board electronics (OBE)
Servo solenoid valves with on-board electronics (OBE) RE 29045/10.05 Replaces: 01.05 1/12 Type 5WRPE 10 Size 10 Unit series 2X Maximum working pressure P 1, P 2, A, B 210 bar, T 50 bar Nominal flow rate
Change-Over Pressure Filter DFDK
Change-Over Pressure Filter up to 2500 l/min, up to 315 bar 30 60 110 140 160 240 280 330 500 660 1.x 660 2.x 990 2.x 1320 2.x 1320 3.x 2640 3.x 3960 3.x 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
RS* /110 ED DOUBLE-ACTING THROTTLE FLOW CONTROL VALVE SERIES 30. Q max (see table of performances) THREADED PORTS CARTRIDGE TYPE
31 200/110 ED RS* DOUBLE-ACTING THROTTLE FLOW CONTROL VALVE SERIES 30 THREADED PORTS CARTRIDGE TYPE p max (see table of performances) Q max (see table of performances) OPERATING PRINCIPLE The RS* and RS*-I
Rexroth Hydraulics. Pressure reducing valve, pilot operated, type 3DR 3DR 10 P 6X Y 00 RE /10.97
RE 26 915/10.97 Replaces: 01.97 Pressure reducing valve, pilot operated, type 3DR Nominal size 10 Series 6X Maximum operating pressure 315 bar Maximum flow 120 L/min Contents H/A/D 5845/97 ype 3DR 10 P5-6X/315Y/00M
Examples 3/2-way valve A T NO: Symbol
1/1 Hauhinco-3_2-way valve_b1_dn3-25_pn320_pn500_x,y-intern water s 01/2016 3/2-way valve B1 X,Y - DN3 DN25 PN320, PN500 Features: Hydraulically actuated directional seat valve controlling liquid media.
5.1 MEDIUM HEAVY DUTY SERIES SIZE 2
.1 MEDIUM HEAVY DUTY SERIES SIZE 2 CONTENTS PGI100 Ordering Code.1.1 Medium Heavy Duty Series Technical Information.1.2 Specifications.1.3 Hydraulic fluids.1.4 Viscosity range.1. Temperature range.1.6
2.4 HEAVY DUTY SERIES
2 2.4 HEAVY DUTY SERIES CONTENTS PPV102 Ordering Code 2.4.1 Heavy Duty Series 2.4.2 Heavy Duty Series compensator 2.4.3 Standard gear pump models Technical Information 2.4.4 Specifications 2.4.5 Hydraulic
Process screen basket filter PRFS
Process screen basket filter PRFS PRFS- PRFS- PRFS- PRFS- PRFS- PRFS- 130x 250x 520x 650x 1500x 2500x Nominal size: Q s max: p s max: Filtration ratings: Specifications DN 50 DN 700 3600 m³/h 16 bar 25
Pressure control valves type AGIR, AGIS, AGIU two stage, subplate mounting, ISO 5781 sizes 10, 20 and 32
Table C0701/E Pressure control valves type AGIR, AGIS, AGIU two stage, subplate mounting, ISO 5781 sizes 10, 20 and 32 AGIRR20/***/V AGIU10/11...E Two stage pressure control valves with balanced poppet
Proportional Throttle Valves Series TDL
Catalogue HY11-200/UK Characteristics Function Proportional throttle valves are designed to include three stages. The main valve poppet is controlled by a hydraulic follower. The position of the hydraulic
Spare Parts List Tank-Top Return Line Filter RFN with Elements to DIN up to 630 l/min, up to 10 bar
Spare Parts List Tank-Top Return Line Filter RFN with Elements to DIN 24550 up to 630 l/min, up to 10 bar RFN 40 RFN 63 RFN 100 RFN 160 RFN 250 RFN 400 RFN 630 1. MAINTENANCE 1.1 GENERAL Please follow
Pressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model DR 6 DP Nominal size 6 Series 5X Maximum operating pressure 315 bar (4600 PSI) Maximum flow 60 L/min
Change-Over Inline Filter AFLD to API 614
Change-Over Inline Filter to API 614 up to 17 l/min, up to 4 bar 112/ 113 122/ 123 232/ 233 242/243 332/333 52/53 542/543 882/883 142/143 272/273 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
DSE /117 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 11 SUBPLATE MOUNTING ISO p max 350 bar Q max 40 l/min
83 2/117 ED DSE3 DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SUBPLATE MOUNTING ISO 41-3 p max 3 bar Q max l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 41-3-2-- (CETOP 4.2-4-3-3). 33 3.2 21. 12.7.1.7
Proportional pressure reducing valve, pilot operated
Proportional pressure reducing valve, pilot operated RE 29175/7.5 Replaces: 11.2 1/1 Types DRE and ZDRE Size 6 Component series 1X Maximum operating pressure 21 bar Maximum flow l/min H446 Table of contents
Monoblock directional control valves DL - Directional control valve
Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal
VPN2-10/MR. Functional Description HU /2008. Pilot Operated Pressure Relief Valves. Replaces HU /2005
Pilot Operated Pressure Relief Valves VPN2-10/MR Size 3/8 (10)...5076 PSI (350 bar)...40 GPM (150 L/min) 7/2008 Replaces 2/2005 Modular and in-line design Five pressure ranges Two pressure adjustment options: