BALL VALVES FILTERS TEST POINTS 8
|
|
- Ross Elliott
- 5 years ago
- Views:
Transcription
1 BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357
2 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves and distribution valves. Valves are a simple and safe solution for cut-off. The advantages of the ball valves are low flow resistance, high density and easy maintenance. Hydroscand can offer customer adapted ball valves in all functions and materials. Ball seal made of POM (thermoplastic), stem and adapter sealing made of NBR. Other materials on request. NOTE! The Types 8011, 8041 and 8042 can only be pressurized on inlet P1, otherwise there will be inner leakage way G-thread, black way SKL connection, black way G-thread way SKL connection way SKS connection way G-thread L-drilled way G-thread T-drilled way G-thread L-drilled way G-thread T-drilled Handle for ball valves Locking device Needle valve Needle/check valve Panel mounting nut for 8070/ BALL VALVES LOW PRESSURE PAGE way low pressure /short 2-way low pressure, short thread way low pressure, L-drilled way low pressure, T-drilled way low pressure, mini valve 360 FILTERS ETC. PAGE LEVEL MEASUREMENTS Level instruments, with or without thermometer, are delivered complete with drilled screws, oil resistant seal, and frame. The standard area of measure is C. FILTERS Spin-on filters for suction and return lines 10 micron. Suction strainers 125 micron. Return oil filters for tank assembling. Complete filler gap with air filters and screws. Air filters 3 micron. TEST POINTS Test points with connection M 16 x 2 are available with the most common connection threads towards the port. Manometer connections and joints are included in Hydroscand's product selection Level Regulator Filler cap Spin-on filter Spin-on filter element for Air filter Suction strainers Return filter Filter element 362 TEST POINTS & ACCESSORIES PAGE 8301 Test points G-thread Test points DKLO connection Test points DKSO connection Manometer fitting, bulk head Manometer fitting, G-thread Measurement hose, manometer connection Measurement hose M16x2, Joint Measurement hose Fitting for measurement hose Fitting for measurement hose Fitting for measurement hose, standpipe Manometer 63 mm G 1/4" down Manometer 63 mm G 1/4" back Manometer 100 mm G 3/8" down Manometer 100 mm G 1/2" down Manometer 100 mm G 1/2" back Accessories for manometer Manometer 100 mm G 3/8" back Manometer 160 mm G 1/2" down Manometer 72 mm G 1/2" digital ~1 Rubber protection Manometer 40 mm G 1/8" back Manometer 40 mm G 1/8" down Test equipment PRODUCT CATALOGUE
3 BLACK way ball valve Steel way ball valve SKS connection E-coated Part number Connection DN Work pr G 1/8" F 4 50,0 MPa G 1/4" F 6 50,0 MPa G 3/8" F 10 50,0 MPa G 1/2" F 12 50,0 MPa G 3/4" F 20 40,0 MPa G 1" F 25 40,0 MPa G 1 1/4" 32 40,0 MPa G 1 1/2" 40 40,0 MPa G 2" 50 31,5 = Cast housing Part number Connection Thread DN Work pr SKS 8 M16x1,5 4 50,0 MPa SKS 10 M18x1,5 6 50,0 MPa SKS 12 M20x1,5 8 50,0 MPa SKS 16 M24x1, ,0 MPa SKS 20 M30x2, ,0 MPa SKS 25 M36x2, ,0 MPa SKS 30 M42x2, ,0 MPa SKS M52x2, ,0 = Cast housing NOTE! The pressure is only related to the valves. Compare with the pressure class for the connection. BLACK way ball valve SKL connection way ball valve E-coated, NOTE! Pressure att port 2 Part number Connection Thread DN Work pr SKL 10 M16x1,5 8 50,0 MPa SKL 12 M18x1, ,0 MPa SKL 15 M22x1, ,0 MPa SKL 18 M26x1, ,0 MPa way ball valve E-coated Part number Connection DN Work pr G 1/4" F 6 50,0 MPa G 3/8" F 10 50,0 MPa G 1/2" F 12 50,0 MPa G 3/4" F 20 40,0 MPa G 1" F 25 40,0 MPa G 1 1/4" 32 40,0 MPa G 1 1/2" 40 40,0 MPa G 2" 50 40,0 = Cast housing way ball valve SKL connection E-coated Part number Connection Thread DN Work pr SKL 6 M12x1,5 4 50,0 MPa SKL 8 M14x1,5 6 50,0 MPa SKL 10 M16x1,5 8 50,0 MPa SKL 12 M18x1, ,0 MPa SKL 15 M22x1, ,0 MPa SKL 18 M26x1, ,0 MPa SKL 22 M30x2, ,0 MPa SKL 28 M36x2, ,0 MPa SKL 35 M45x2, ,0 MPa SKL M52x2, ,0 = Cast housing Part number Connection DN Drill Work pr G 1/8" F 4 L-drilled 50,0 MPa G 1/4" F 6 L-drilled 50,0 MPa G 3/8" F 10 L-drilled 50,0 MPa G 1/2" F 12 L-drilled 50,0 MPa G 3/4" F 20 L-drilled 40,0 MPa G 1" F 25 L-drilled 40,0 MPa G 1 1/4" F 25 L-drilled 40,0 MPa G 1 1/2" F 25 L-drilled 40,0 MPa way ball valve E-coated, NOTE! Pressure att port 2 Part number Connection DN Drill Work pr G 1/4" F 6 T-drilled 50,0 MPa G 3/8" F 10 T-drilled 50,0 MPa G 1/2" F 12 T-drilled 50,0 MPa G 3/4" F 20 T-drilled 40,0 MPa G 1" F 25 T-drilled 40,0 MPa way ball valve E-coated Part number Connection Drill Work pr G 1/8" F L-drilled 50,0 MPa G 1/4" F L-drilled 50,0 MPa G 3/8" F L-drilled 50,0 MPa G 1/2" F L-drilled 50,0 MPa G 3/4" F L-drilled 31,5 MPa G 1" F L-drilled 31,5 MPa G 1 1/4" F L-drilled 31,5 MPa G 1 1/2" F L-drilled 10,0 MPa 8 PRODUCT CATALOGUE 359
4 way ball valve E-coated Part number Connection Drill Work pr G 1/8"F T-drilled 50,0 MPa G 1/4" F T-drilled 50,0 MPa G 3/8" F T-drilled 50,0 MPa G 1/2" F T-drilled 50,0 MPa G 3/4" F T-drilled 31,5 MPa G 1" F T-drilled 31,5 MPa G 1 1/4" F T-drilled 31,5 MPa G 1 1/2" F T-drilled 10,0 MPa Handle for ball valves way low pressure Teflon seal, brass, short thread Part number Connection Work pr G 1/4" F 4,0 MPa G 3/8" F 3,0 MPa G 1/2" F 3,0 MPa G 3/4" F 3,0 MPa G 1" F 3,0 MPa G 1 1/4" F 3,0 MPa G 1/1/2" F 3,0 MPa G 2" F 3,0 MPa G 2 1/2" F 3,0 MPa G 3" F 3,0 MPa way ball valve Brass Part number Type Material xx Bend Zinc xx Straight Aluminium xx Straight Steel xx Bend Aluminium xx = Hole dimension (07, 08, 10, 12, 14, 17, 19, 22) Locking device 2 and 3-way valves Steel Part number Drill Connection Work pr L-drilled G 1/4" F 3,4 MPa L-drilled G 3/8" F 3,4 MPa L-drilled G 1/2" F 3,4 MPa L-drilled G 3/4" F 3,0 MPa L-drilled G 1" F 3,0 MPa L-drilled G 1 1/4" F 2,5 MPa L-drilled G 1 1/2" F 2,0 MPa L-drilled G 2" F 1,5 MPa way ball valve Brass Part number Fits DN / / / / 40 / way low pressure Teflon seal, brass Part number Drill Connection Work pr T-drilled G 1/4" F 6,5 MPa T-drilled G 3/8" F 6,5 MPa T-drilled G 1/2" F 6,5 MPa T-drilled G 3/4" F 4,0 MPa T-drilled G 1" F 4,0 MPa way mini valve Brass Part number Connection Work pr G 1/4" F 6,5 MPa G 3/8" F 6,5 MPa G 1/2" F 6,5 MPa G 3/4" F 4,0 MPa G 1" F 4,0 MPa G 1 1/4" F 4,0 MPa G 1 1/2" F 4,0 MPa G 2" F 4,0 MPa G 2 1/2" F 3,0 MPa G 3" F 3,0 MPa G 4" F 3,0 MPa Part number Type Connection Work pr Mini valve G 1/8" F 3,0 MPa Mini valve G 1/4" F 3,0 MPa Mini valve G 3/8" F 3,0 MPa Mini valve G 1/2" F 3,0 MPa Mini valve G 3/4" F 3,0 MPa Mini valve G 1" F 3,0 MPa 360 PRODUCT CATALOGUE
5 8070 Needle valve 8101 Spin-on filter Part number Connection DN Work pr G 1/8"F 6 35,0 MPa G 1/4" F 8 35,0 MPa G 3/8" F 10 35,0 MPa G 1/2" F 12 35,0 MPa G 3/4" F 16 35,0 MPa 8072 Needle/check valve Opening pressure 0,5 bar Part number Connection DN Work pr G 1/8" F 6 35,0 MPa G 1/4" F 8 35,0 MPa G 3/8" F 10 35,0 MPa G 1/2" F 12 35,0 MPa G 3/4" F 16 35,0 MPa Panel mounting nut for 8070/8072 Part number Type For DN Panel mounting nut 8070/ Panel mounting nut 8070/ Panel mounting nut 8070/ Panel mounting nut 8070/ c/c 8100 Level regulator Part number Connection Q max µ G 3/4" F 55 l/min G 3/4" F 55 l/min G 1 1/4" F 145 l/min G 1 1/4" F 145 l/min 10 Part number Filtering 8201 Filter element For 8101 Fits micron nominal xx micron nominal xx micron nominal xx micron nominal xx Part number Thread Ø µ G 1/4" M G 3/8" M G 1/2" M G 3/4" M G 1" M Length Ø Thread Thread 8109 Air filter 8102 Suction strainers Ø Part number c/c Fixing screw level regulator 2 x M level regulator/thermometer 2 x M level regulator 2 x M level regulator/thermometer 2 x M level regulator 2 x M level regulator/thermometer 2 x M 12 H Ø 8104 Filler cap Part number Hole Ø H µ Ø Ø Ø Part number Thread Ø Length G 1/2" G 1" G 1 1/2" Return filter Part number Thread Q max µ G 1/2" 25 l/m G 3/4" 40 l/m G 1" 55 l/m G 1 1/4" 125 l/m 10 8 PRODUCT CATALOGUE 361
6 8203 Filter element 8306 Manometer fitting Bulkhead, G-thread M16 x 2 male Part number Thread Q max G 1/2" 25 l/m G 3/4" 40 l/m G 1" 55 l/m G 1 1/4" 125 l/m Test points M16 X 2 Part number Type Connection Manometer fitting, bulkhead G 1/4 F Manometer fitting, bulkhead G 3/8 F Manometer fitting, bulkhead G 1/2 F 8307 Manometer fitting G-thread M16 x 2 female Part number Type Seal Connection Test points M16 x 2 ED G 1/8 M Test points M16 x 2 ED G 1/4 M Test points M16 x 2 ED G 3/8 M Test points M16 x 2 ED G 1/2 M Test points M16 x 2 ED S 12 x 1, Test points M16 x 2 O-ring M10 x Test points M16 x 2 O-ring M12 x 1, Test points M16 x 2 ED M14 x 1, Test points M16 x 2 ED M16 x 1, Test points M16 x 2 O-ring 7/16"-20 UNF Test points M16 x 2 O-ring 9/16-18 UNF Part number Type 8303 Test points M16 x 2 DKLO connection, DIN 2353 Connection Pipe dim Test points M16 x 2 DKLO Test points M16 x 2 DKLO Test points M16 x 2 DKLO Test points M16 x 2 DKLO Test points M16 x 2 DKLO Test points M16 x 2 DKLO Test points M16 x 2 DKLO Test points M16 x 2 DKLO Test points M16 x 2 DKLO Test points M16 x 2 DKLO Test points M16 x 2 DKSO connection, DIN 2353 Part number Type Connection Manometer fitting G 1/4 F Manometer fitting G 1/2 F Part number Type 8308 Measurement hose M16 x 2,0 G 1/4 Manometer connection WP 63,0 MPa Length Measurement hose L = 200 mm Measurement hose L = 400 mm Measurement hose L = 600 mm Measurement hose L = 800 mm Measurement hose L = 1000 mm Measurement hose L = 1500 mm Measurement hose L = 2000 mm Measurement hose L = 2500 mm Measurement hose L = 3200 mm Measurement hose L = 4000 mm Measurement hose L = 4500 mm Measurement hose L = 5000 mm Part number Joint M16 x Joint M16 x 2 M16 x 2. Part number Type Connection Pipe dim Test points M16 x 2 DKSO Test points M16 x 2 DKSO Test points M16 x 2 DKSO Test points M16 x 2 DKSO Test points M16 x 2 DKSO Test points M16 x 2 DKSO Test points M16 x 2 DKSO Test points M16 x 2 DKSO Test points M16 x 2 DKSO Test points M16 x 2 DKSO PRODUCT CATALOGUE
7 8309 Measurement hose M16 x 2,0 WP 63,0 MPa Part number Type Length Measurement hose L= 200 mm Measurement hose L= 300 mm Measurement hose L= 400 mm Measurement hose L= 600 mm Measurement hose L= 800 mm Measurement hose L= 1000 mm Measurement hose L= 1500 mm Measurement hose L= 2000 mm Measurement hose L= 2500 mm Measurement hose L= 3200 mm Measurement hose L= 4000 mm Measurement hose L= 5000 mm 8350 Measurement hose Polyamide with Aramid reinforcement 8352 Fitting for measurement hose Part number Type Hose ID M 16 x 2,0 FS straight DN M 16 x 2,0 FS 90 DN S 12,65 x 1,5 FS DN Fitting for measurement hose 60 cone sealing Part number Type Hose ID G 1/4 FS straight DN Fitting for measurement hose Part number OD ID Bend rad. Work pr ,6 mm 2,0 mm 35 mm 63,0 MPa Part number Type Hose ID Standpipe 6 mm DN Standpipe 8 mm DN 2 8 PRODUCT CATALOGUE 363
8 Manometer 63 mm Connection G 1/4" down Manometer 63 mm Connection G 1/4" back ,0 G 1/4" ,0 G 1/4" ,5 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,5 G 1/4" ,0 G 1/4" ,6 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,5 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,5 G 1/4" ,0 G 1/4" ,6 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" ,0 G 1/4" 364 PRODUCT CATALOGUE
9 Manometer 100 mm Connection G 3/8" down Manometer 100 mm Connection G 3/8" back ,0 G 3/8" ,0 G 3/ ,5 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,7 G 3/ ,5 G 3/ ,0 G 3/ ,6 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,5 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,5 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/ ,0 G 3/8 8 PRODUCT CATALOGUE 365
10 Manometer 100 mm Connection G 1/2" down Manometer 100 mm Connection G 1/2" back ,0 G 1/2" ,0 G 1/2" ,5 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,7 G 1/ ,5 G 1/2" ,0 G 1/2" ,6 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/ ,0 G 1/ ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/ ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/ ,0 G 1/ ,5 G 1/2" ,0 G 1/ ,0 G 1/ ,0 G 1/2" ,0 G 1/2" ,5 G 1/ ,0 G 1/ ,6 G 1/ ,0 G 1/ ,0 G 1/ ,0 G 1/2" ,0 G 1/ G 1/ ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" 366 PRODUCT CATALOGUE
11 Manometer 160 mm Connection G 1/2" down ,0 G 1/2" ,0 G 1/2" ,5 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,7 G 1/ ,5 G 1/2" ,0 G 1/2" ,6 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/ ,0 G 1/ ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" ,0 G 1/ ,0 G 1/2" ,0 G 1/2" ,0 G 1/2" mm house Connection G 1/8" back mm house Connection G 1/8" down House in black ABS plastic House in black ABS plastic ,5 G 1/8" G 1/8" G 1/8" G 1/8" G 1/8" G 1/8" G 1/8" G 1/8" G 1/8" G 1/8" 8 PRODUCT CATALOGUE 367
12 8363 Digital manometer Ø 72 mm Connection G 1/ Accessories for manometer Part number Data Pressure: bar Accuracy: 0,2 % Coating: IP ~1 Rubber protection For digital manometer Part number Type Front flange 63 mm Clamp support 63 mm Rubber protection Ø63 mm Rubber protection Ø100 mm Part number Type Rubber protection Ø63 mm 8372 Test equipment With 2 manometers Part number Description Test equipment 2 mano. Basic content: Manometer 16,0MPa 1 pc ( ) Manometer 40,0MPa 1 pc ( ) Manometer fitting G 1/4 2 pc ( ) Test points G 1/8 1 pc ( ) Test points G 1/4 1 pc ( ) Test points G 3/8 1 pc ( ) Test points G 1/2 1 pc ( ) Measurement hose L = 2 m 1 pc ( ) Test equipment 2 mano. Basic content: Manometer 16,0 MPa 1 pc ( ) Manometer 40,0 MPa 1 pc ( ) Manometer fitting G 1/4 2 pc ( ) Test points G 1/8 1 pc ( ) Test points G 1/4 1 pc ( ) Test points G 3/8 1 pc ( ) Test points G 1/2 1 pc ( ) Measurement hose L = 2 m 1 pc ( ) Digital manometer bar 1 pc ( ) Rubber protection 1 pc ( ) Equipment bag 2, empty 368 PRODUCT CATALOGUE
Hose Information. Pressure 376 Vacuum 376
HYDROSCAND Technical Information Table of Contents Hose Information Page Hose Dimensioning 362 Flow Diameter 363 Installation examples 364 Calculation of Hose Length 365 Working Pressure, hydraulic hoses
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More information3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
More informationChapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
More informationKEYSTONE F89 PNEUMATIC QUARTER-TURN ACTUATOR GENERAL PURPOSE / HAZARDOUS AREA
FEATURES Direct mounting to all Keystone butterfly valves and ball valves. Valve connection compatible with Keystone (imperial and metric) and ISO 5211. Double Rack and Pinion design nullifies side loads
More information05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
More informationLevel indicators, screw plugs
Level indicators, screw plugs 885 Product overview Level indicators, screw plugs Oil level gauges K0443 Plastic plugs K0452 Oil level gauges K0444 Page 888 Aluminium plugs K0453 Page 894 Oil level sight
More informationSewage transport Submersible pumps
Series description Wilo-Rexa FIT Available from January 2012 Construction Submersible sewage pump with cast iron hydraulics and stainless steel motor Type key Example: Wilo Rexa FIT V06DA-110/EAD1-2-T0015-540-A
More informationHIGH PRESSURE HYDRAULICS (Hose, Coupling, Pressure Gauges, Adaptors)
HIGH PRESSURE HYDRAULICS (Hose, Coupling, Pressure Gauges, Adaptors) HIGH PRESSURE THERMOPLASTIC HOSES As the specialist in the manufacturing of high pressure hoses, we are poised to achieve exceptional
More informationSpare parts list ( ) HD 2.3/26 CV
Spare parts list (1.107-077.0) HD 2.3/26 CV 08.12.2015 www.kaercher.com EN Table of contents Order instructions HD 2.3/26 CV (1.107-077.0) 200 Spare parts list G 2600 PH 10 Frame 20 Pump set 21 Cylinder
More information- SPECIFICATIONS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART MULTIGO PERFORMANCE CHART MULTIGO
CONTENTS Page - CONTENTS CONTENTS 100 - SPECIFICATIONS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART 40 202 PERFORMANCE CHART 80 203 - CONSTRUCTIONS CONSTRUCTIONS 300 CONSTRUCTIONS 301 CONSTRUCTIONS
More informationProduct catalogue. Mechanical accessories for pumps and mixers
Product catalogue Mechanical accessories for pumps and mixers Contents Mixer accessories Single guide bar system...4 Double/tripod guide bar system...9 Cantilever system...14 Bottom fixing plate system...15
More informationDN crimping diameter (guide values) [mm] 2 7,0 4 9,9
ØD hose hose PN pricked* ød part no. 2 400 bar yes 5 9-946-02-00-012 2 630 bar - 5 9-946-02-00-020 2 630 bar yes 5 9-946-02-01-020 4 550 bar yes 8 9-946-04-00-010 *for inert gases technical data of the
More informationVane Air Motors - P1V-B
Vane Air Motors - P1V-B These large motors are designed for use in the most arduous applications, requiring considerable power, torque, robustness and reliability Operating information Working pressure:
More informationVALVE FEATURES AVAILABLE MODELS LIMITS OF USE IP 67
VALVE FEATURES The resilient seat gate valve type is dedicated to the shut off of clear water and sewage water pipes. The motorization with the REGADA actuator allows the automation and the remote control
More informationOne-way flow control valves GR/GRA, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal One-way flow control function Pneumatic connection 1 GR/GRA
More informationKeystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
More informationKEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
More informationTECHNICAL CATALOGUE DISTRIBUTION MANIFOLDS
TECHNICAL CATALOGUE DISTRIBUTION TEC ITAP SpA, founded in Lumezzane (Brescia) in 972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for plumbing
More informationTable of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 QUANTITY FOR MODEL 303 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATION 202 PERFORMANCE CURVE 40/86 203 PERFORMANCE CURVE 40/106 204 PERFORMANCE CURVE 40/126 205 PERFORMANCE CURVE 40/156
More informationKeystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area
The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with
More informationTECHNICAL CATALOGUE BALL VALVES: VIENNA
TECHNICAL CATALOGUE BALL VALVES: STANDARD LOW BALL VALVES: Suitable for domestic water ServiceS, heating, airconditioning plants and compressed air SyStemS. BALL VALVES 116 BALL VALVE, STANDARD LOW size
More informationValves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
More informationYOUR SOLUTION PROVIDER IN HYDRAULIC PISTON ACCUMULATORS AND PULSATION DAMPERS
YOUR SOLUTION PROVIDER IN HYDRAULIC PISTON ACCUMULATORS AND PULSATION DAMPERS PISTON ACCUMULATORS 3 Technical specification of standard PAC 5 PAC Standard range pressure 250 bar 6 PAC Standard range pressure
More informationValves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
More informationBRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING
BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING DOT AIR BRAKE FITTINGS - COPPER TUBING DOT PUSH LOCK FITTINGS - NYLON TUBING DOT COMPOSITE
More informationMacro LNG automotive_last Update January 17 th 2017
Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent
More informationQUICK COUPLINGS DHI. ver. 0001
QUICK COUPLINGS DHI www.manuli-hydraulics.com Q.SAFE DHI INTRODUCTION MQS-DHI DIRECT HOSE INTEGRATION An innovative system to enable direct assembly of the quick-release coupling to the flexible hose,
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
More informationLiquid ring vacuum pumps with magnetic coupling
Liquid ring vacuum pumps with magnetic coupling LPH 75320, LPH 75330, LPH 75340 Pressure range: Suction volume flow: 33 to 1013 mbar 485 to 1615 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring vacuum
More informationRemote reading dial thermometers, version for industry
Remote reading dial thermometers, version for industry Type 313 WH, 323 TA, 333 TE and 334 KL Measuring system Nitrogen filled Type 313 WH Accuracy (EN 13190) Class 1 Case Crimped-on ring, stainless steel
More informationStauff Hydraulic Accessories
Hydraulic & Offshore Supplies Stauff Hydraulic Accessories YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE Contents STAUFF Hydraulic Accessories
More informationfunnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
More informationMiniature Regulator Series ARJ310
Miniature Regulator Series 30 Compact and lightweight (Main body 65 g) 8.3 Improved flow characteristics 0. 0. 0 00 00 300 400 500 Allows smaller mounting pitch 8.8mm 0-M5 30-0 Inlet pressure: MPa Accommodates
More informationMN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,
More informationMicrobore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
More informationMULTIGO. EBARA Pumps Europe S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 40 203 PERFORMANCE CURVES 80 204 - CONSTRUCTIONS SECTIONAL VIEW
More informationMINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15
MINI-SOLENOID VALVES ISO 58 (CNOMO, size 5) interface direct operated, pad mounting body connector size 5 NC / Series 0 FEATURES Compact, monobloc solenoid pilot valve with spade-plug connector type EN
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
More information3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
More informationHIGH PRESSURE - pumps
Gear pumps TRAE Positive displacement, external gear pumps intended for hydraulic systems of machines and devices. Material Housing Aluminium Mounting plate Aluminium (groups 1 and 2), cast iron (group
More informationFLOW SWITCHES AND COMBINATION CONTROLS
6 ULTIMHEAT FLOW SWITCHES AND COMBINATION CONTROLS The professional solution: an extended, rational, and consistent range of products Technical catalogue for R&D department Edition 28/05/2013 E-Mail :
More information2018 High Performance Check Valves for liquid and gaseous media
2018 High Performance Check Valves for liquid and gaseous media Check valves Catalogue 45 Date: 04/2018 WEH - We Engineer Hightech All rights reserved, WEH GmbH 2018. Unauthorized copies are strictly forbidden
More informationMINI-SOLENOID VALVES direct operated subbase mounted, CNOMO (15 mm width) connector size 15
MINI-SOLENOID VALVES direct operated subbase mounted, CNOMO ( mm width) connector size / Series 0 FEATURES Low consumption (0,W) Compact, monobloc solenoid pilot valve with spade-plug connector type AMP,8x0,
More informationBUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - N123 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
More informationSPARE PARTS CATALOGUE WINTEX 2000
P A G E 1 SPARE PARTS CATALOGUE WINTEX 2000 201705 P A G E 2 FIXED FRAME 1 50101015 Spacer ring f. Jack cylinder 2 50101016 Cylinder washer 3 50101017 Sensor fitting 50101018 Fixed frame 5 50101020 Jack
More informationBUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
More informationSpeed Controller with One-touch Fitting AS13 1F-M3 AS13 1F-M5. Specifications
Speed Controller with One-touch Fitting Series Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 32-250/7.56 203 PERFORMANCE CURVES 32-250/9.26 203 PERFORMANCE CURVES
More informationBUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - 223 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
More informationBALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
More informationGAS LINK SYSTEM. About Gas Link Systems. Blocks and Accessories. Micro EO24 TM Hose and Tube System. EZ-Hose System.
GAS LINK SYSTEM About Gas Link Systems Blocks and Accessories Micro EO TM Hose and Tube System EZ-Hose System EO-Hose System Hose Crimping Equipment 1 5 6 Finnveden standard Kaller is the Finnveden standard
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
More information40-501, , ,
-9 Silencer, plastic. -5, -5 Silencer, sintered bronze. - Flow control silencer. -5 Check valves. -5 Hand sliding valves. -5, -5 Quick couplings. -5 Miniature regulator, screw-in type.6-55 Check valves.7-56,
More informationDoors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)
Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable
More informationSpare parts list Pentruder Modular Drilling System
Spare parts list Pentruder Modular Drilling System Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M
More informationCouplings, hose clamps and pneumatics
Cejn 310... 79 Cejn 320... 79 Cein 331... 80 Cejn 421... 80 Cejn 223... 81 Cejn 341... 81 Cejn 410... 82 Cejn 550... 82 Cejn 342... 83 Cejn 347... 83 Cejn 220... 84 Cejn 171 (Acetylen)... 84 Cejn 172 (LPG)...
More informationMN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2
More informationFunction Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
More informationCatalogue 6 STAUFF Valves
Two-Way Ball Valves Multi-Way Ball Valves Flow Control and Check Valves Gauge Isolator Valves Catalogue 6 STAUFF Valves Germany Walter Stauffenberg GmbH & Co. KG Im Ehrenfeld 4 58791 Werdohl Tel.: +49
More informationAV 23 Balancing valves SETTER Inline
AV Balancing valves SETTER Inline Application Direct reading and balancing valve with visual flow indication. Correct balancing of circuits ensure optimum efficiency of the system and can therefore help
More informationay Manifold Mounted KHP3K
3-Way ay Manifold Mounted Ball Valves KHP3K up to 500 bar up to DN 32 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, FLUTEC 3/2-way manifold mounted ball valves are units for shutting off and diverting
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationMetal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Industrial Application
Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Straight, Male 45, Male 90, Male Straight, Female Straight, Cable Hose, Male Straight Swivel Fittings Ferrules for Fittings Further Accessories Applications
More informationCMA-B-C-D. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE CMA 204 PERFORMANCE CURVE CMB 205 PERFORMANCE CURVE CMC 206 PERFORMANCE
More informationDimensional Drawing - Mounting Options
Dimensions: mm Dimensional Drawing - Mounting Options Side Mounting Brackets Kit: PAT50386002 E G F C D B A A B C D E F G 25 11 20 10 6,3 50 1,9 Wall/Panel Bracket Kit: P699AT502467001 K J ØH D M 01813GB-2015/R01
More informationVSO - MI thermally compensated proportional valve
The VSO - MI is a miniature proportional valve specifically designed for medical device manufacturers and incorporates thermal compensation to provide precise flow control and stability over a wide operating
More informationHYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES The automatic control valves are diaphragm valves designed to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Main valve uses
More informationElectrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
More informationOil safety valve 141 Flame arrester 143 Air release valve for reservoirs 145 Reparation of valves, pumps and other valves 148
PRODUCT CATALOGUE 2 History 4 Products Gate valves Flat 13 Oval 25 Round 41 Knife 53 Butterfly valves Double eccentric 63 Triple eccentric 81 Turbine inlet valves 85 Non-return valve Swing check valves
More informationSpecifications VH600. Ambient temperature and operating fluid temperature. Operating angle Lubrication. Semi-standard
Hand Valve Series VH Specifications Fluid Proof pressure Max. operating VH00/00/00 pressure VH00 Ambient temperature and operating fluid temperature Air.5 MPa.0 MPa MPa -5 to 0 C (No freezing) VH0 VH00
More informationSystem components for sample gas sampling
Data Sheet 10/23-5.10 EN Rev. 9 System components for sample gas sampling Modular sample gas probe system FE2 Filter unit Annular heating element Heating sleeve PFE2 Filter unit PFE3 Filter unit Type 40,
More informationCVM. EBARA PUMPS EUROPE S.p.A. MULTISTAGE CENTRIFUGAL PUMPS
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 kw) 203 PERFORMANCE CURVE A (FROM 0.75 kw UP TO 1.1 kw) 204 PERFORMANCE CURVE
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 PERFORMANCE RANGE and SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE
More informationCNC DISTRIBUTION. ITEM NO Description Quantity
Valves CNC DISTRIBUTION Brass Ball Valves ITEM NO IPS Ball Valve *600# PSI WOG 150 PSI WSP * Heavy Pattern Forged Brass Construction *Full Port For Maximum Flow *Teflon Seats * Teflon Stem Packing * AGA,
More informationPage ATALOGUE. Web: Tel: Fax:
Page ACUUM PARE ANKER ARTS ATALOGUE Page 2 CONTENTS PAGE GAUGES 3 SAUNDERS M TYPE VALVES 4 LEVER BALL VALVES 5 GATE VALVES 6 AIR ACTUATED VALVES 7 KNIFE GATE VALVES 8 ACRYLIC SIGHT TUBE 9 RUBBER SUCTION
More informationseries Walter Schumacher Impuls-Technik GmbH
Walter Schumacher Impuls-Technik GmbH Reessweg 7 D-74626 Bretzfeld - Bitzfeld series 250-251 phone +49 (0) 79 46 91 30-0 fax +49 (0) 79 46 91 30-10 email info@sit-ventile.de internet www.sit-ventile.de
More informationMICRO SOLENOID VALVE pinch mechanism for flexible tube O.D to 9.5 mm
MICRO SOLENOID VALVE pinch mechanism for flexible tube O.D..65 to 9.5 mm U / Series 84 FEATURES Solenoid valve suitable for cutting off the flow of a fluid by pinch For sterile, aseptic, physiological
More informationMOBILE GREASE UNITS PUMPS. AC DIESEL PUMPS and kits - polaris series Product specifications are subject to change without prior notice
PUMPMASTER 2 oil pumps MOBILE GREASE UNITS WITH PUMPMASTER 3+3 pumps - 20 AND 50 Kg. 000 000 Iquip modit pumps iriuscidunt nos niam ver ip electric DC DIESEL and kits - polux series........................................
More informationBuild the future, prepare for LNG
LNG Liquefied Natural Gas is the efficient new green fuel Build the future, prepare for LNG Manufacturing safe and innovative quality products Your LNG partner: LNG Vent Connections Male Quick Disconnect
More informationPre-Fabricated Flushing Bypass Assembly for Plant Applications Hero Plant DN15-150
Pre-Fabricated Flushing Bypass Assembly for Plant Applications Description Hero Plant is a pre-fabricated, flushing bypass arrangement for balance, control, isolation, and operation of plant devices. Flow
More informationProductinformatie BAFA.NL BAFA.NL A.U.K. MÜLLER GMBH & CO. KG
Productinformatie A.U.K. MÜLLER GMBH & CO. KG Description 14.025.126 series water inlet valves are 2/2-way solenoid valves with an orifice size of 25 mm. They have been developed to control potable water
More informationMB SERIES SMB SERIES MINIATURE TANK BREATHERS MINIATURE TANK BREATHERS ACCCESSORIES. Phone (608) Fax (608)
G1 MB SERIES MINIATURE TANK BREATHERS 10 Micron Filtration (Nominal) Shatter Resistant Plastic Construction Temperatures Up to +225 F Model A B Number Thread Size Overall Height MB-02-10 1/4 NPT 1.8 MB-03-10
More informationNON RETURN BRASS FLANGED AGA GAS APPROVED
NON RETURN BRASS FLANGED AGA GAS APPROVED ACTUATED MARINE STAINLESS STEEL 34 VALVES 36... BRASS BALL VALVES 37... AGA GAS APPROVED VALVES GATE VALVES 38... BRASS VALVES 39... RUBBER BELLOW, HOSECOCKS &
More informationQuick Coupling Products Distribution. Catalogue 3800-DS/UK
Quick Coupling Products Distribution Catalogue 38-DS/UK For your safety! Under certain circumstances, quick couplings can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks.
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE 32-250/9.2
More informationParts List. MINOR
No: 88600 En Revision 3.0 0 Parts List MINOR 803.80 www.grindex.com 5 8 8 6 7 8 O-RING KIT 80 BASIC REPAIR KIT 90 6-68 5 6 7 9 0 50-5 3 5 6 7 8 9 30 300 39-35 85 303 86 3 33 3 35 36 37 38 83 39 0 8 N 68
More information2380N High pressure hose. Design Factor >2:1. CONSTRUCTION Core tube : Polyamide. Hoses with design factor >2:1 2380N
C 2380N 2380N High pressure hose CONSTRUCTION Core tube : Polyamide Pressure reinforcement : Two spiral layers and two open spiral layers of high tensile steel wire Cover : Polyurethane Standard colour
More informationCMA-B-C-D. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS
CENTRIFUGAL PUMPS CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 PERFORMANCE CHART CMA 0.50 203 PERFORMANCE CHART CMA 0.75 204 PERFORMANCE CHART CMA 0.80 205 PERFORMANCE CHART
More informationCOMPONENTS FOR WATERJET
COMPONENTS FOR WATERJET Easy to use, up to 101.500 psi (7.000 bar) & customizable features Based on a long-term cooperation with machines manufactures and users from all over the world, we have developed
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART BEST ONE 202 PERFORMANCE CHART BEST ONE VOX 203
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART 202 PERFORMANCE CHART VOX 203 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 DIAGRAM AND ELECTRIC CONNECTIONS 302 DIAGRAM
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 20 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
More informationPROPORTIONAL VALVES Sentronic D - G 1/8 to G 3/8 tapped body or G 1/8 - G 1/4 subbase mounted body with digital pressure control
PROPORTIONAL VALVES Sentronic D - G 1/8 to G 3/8 tapped body or G 1/8 - G 1/4 subbase mounted body with digital pressure control 3 ports Series 608 609 FEATURES Sentronic D is a highly dynamical 3-way
More informationParts List. MAJOR
No: 8860 En Revision.0 0.0 Parts List MAJOR 80.80 www.grindex.com 5 8 8 6 7 8 O-RING KIT 80 BASIC REPAIR KIT 90 6-68 5 6 7 9 0 50-5 3 5 6 7 8 9 30 300 39-35 85 303 86 3 33 3 35 36 37 38 83 39 0 8 N 68
More informationstainless steel compression fittings
compression fittings principle of compression fittings egris has used its long experience of brass compression fittings to develop a range of compression fittings. These fittings are resistant to aggressive
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationGS-FLANGE SYSTEM. SAE psi
SAE 10000 psi Flange dimensions...160 Retain ring flanges...161 Grooving direct on to pipe...162 Flange for welding...163 Tee block, Elbow block...164 Blind flange...165 Seal carriers...166 Retain ring...167
More information