Table of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
|
|
|
- Rosamund Robinson
- 5 years ago
- Views:
Transcription
1
2 Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold insertion as cartridge type 54 Flow control valves 56 with threaded connector 56 for manifold mounting 58 Attachments, accessories 6 3
3 Product overview Check valves Needle valves Flow control valves 4 4
4 Check valves with threaded connector steel DN 4 - DN 5 Full flow, no reduction! Please check pressure rating of the pipe fittings! Custom orders on request Also available with most other connections ody: Seat: O-Rings: steel, zinc plated PO FK Connection DN Thread OD L L SW Opening- Weight D pressure DN PN Article-No. For cut (clamp) ring tube fittings DIN 353 light series ISO For cut (clamp) ring tube fittings DIN 353 heavy series ISO SP-female hread DIN EN ISO 8- NPT-female thread ANSI/ASE x,5 6 88,, 9,,8 6 4 x,5 8 88,, 9,,8 8 6 x,5 85, 7, 4,5,7 8 x,5 87, 7, 4,5,7 x,5 5 5, 33,5 3,5, x,5 8, 45, 36,5,78 3 x 6, 4 45, 4,5, 5 36 x 8 37, 4 55, 5,5, x 35 74,5 6 7, 6,5 3, 4 5 x 4 96,5 6 86, 75,5 5,4 4 6 x,5 8 94,, 9,,8 6 8 x,5 94,, 9,,8 8 x,5 89, 7, 4,5,7 x,5 4 93, 4 7, 4,5,7 4 x,5 6 9, 4 33,5 3,5, x 8, 6 45, 36,5,83 36 x 5 34, 8 45, 4,5, 5 4 x 3 49, 55, 5,5, x 38 85,5 7, 6,5 3, 4 G /8-9,, 9,,8 6 G /4-9,, 9,,8 G 3 /8-85, 4 7, 4,5,7 G / - 4, 5 33,5 3,5,46 6 G 5 /8-6, 8 45, 36,5,9 G 3 /4 -, 8 45, 4,5, 5 G - 4, 8 55, 5,5,75 3 G /4-5,5 7, 6,5,9 4 G / - 84,5 86, 75,5 5,6 5 G - 5, 4 6, 95,5, 4 /8-7 NPT - 9, 6,9, 9,,8 6 /4-8 NPT - 9,,, 9,,8 3 /8-8 NPT - 85,,3 7, 4,5,7 / - 4 NPT - 4, 3,6 33,5 3,5,46 3 /4-4 NPT -, 4, 45, 4,5, 5 - / NPT - 4, 6,8 55, 5,5,75 3 /4 - / NPT - 5,5 7,3 7, 6,5,85 4 / - / NPT - 84,5 7,3 86, 75,5 5,6 5 - / NPT - 5, 7,7 6, 95,5,
5 Check valves with ISO-flange connection (SAE) steel DN 3 - DN Please check pressure rating acc. to ISO 66 Custom orders on request To turn the direction of the flow switch part 3, 4, 5 and 8 Remove part 9 for ISO 66- Ø Ø D Version : round body L ody Cap 3 Piston 4 Spring 5 Seat 6 O-Ring 7 O-Ring 8 Inverted ring 9 Sleeve Steel, zinc plated/po-fk Connection DN L D Opening- Weight PN Article-No. pressure Remove part 9 (sleeve) ISO 66-/- 3 47, 33,5 36,, , 4, 46,, , 48, 5,, /5 7, 55, 6,, /3 8, 65, 7,, /3 8, 76, 86,, hole pattern ISO 66- hole pattern ISO
6 Check valves with ISO-flange connection (SAE) steel DN 3 - DN 5 Please check pressure rating acc. to ISO 66 Custom orders on request To turn the direction of the flow switch part 3, 4, 5 and 8 L ody Cap 3 Piston L3 4 Spring 5 Seat L 6 O-Ring 7 O-Ring Version : square body 8 Inverted ring Steel/PO-FK Connection DN L L L3 Opening- Weight PN Article-No. pressure ISO 66-/- 3 47, 3, 33,4, , 39, 4,5, , 45,5 47,5, /5 7, 5, 57,, /3 8, 6, 65,, /3 8, 73, 79,,
7 Check valves for manifold mounting steel DN 6 - DN 4 O-Rings included in delivery D4 D3 L5 L5 H T O-Ring L L L3 D T H L4 L7 L6 L4 L6 DN 6 - DN DN 6 - DN 4 ody: O-Rings: steel, zinc plated FK Connection DN L L L3 L4 L5 L6 L7 H H DN D D3 D4 T T Weight Openingpressure For cylinderhead screw DIN EN ISO 476 (DIN 9) PN Article-No. ody flange with O-Ring-sealing 6 6, 8, 39, 9, 6,4 43, - 4,5 8,5 6, 8, 8 5,5, 57, 35, 6,5 6, - 46, 33,5,, 5,5 3, 6, 33,5 9, 65, - 5, 38, 5,,5 3, 5, 7, 38,, 75, - 57,5 44,5 3, 6, 6 54,,4 4, 76,, 9, 38, 7, 54, 45,,5 57, 8,, 95, 9, 7, 47,5 76,5 6, 5, 5, 5 79,5 3,6 5,,, 58, 6,, 76, 55, 7,5 3 95, 36,8 78, 43, 3, 84, 7,5 5, 9, 75, 37,5 4 89, 39,5 7, 33,5 4, 78, 67, 4,,, 5, 6 5, 9,7 6,4,5,3 6,8,, ,,3 6,4,5,5 6,8, , 5,7 6,4,5,5 6,8,5, , 8,7 6,4,5,5 6,8,9, , 3,6 8,4 3,5,9 9,,, , 3,5 8,4 3,5, 9, 3,, , 37,5,5 8,,, 5,, , 43,5 3,,, 3,,3, , 57,5 3,,, 3, 5,8, DN E E E3 E4 E5 E8 O-Ring General tolerances DIN ISO 768 Surfaces DIN EN ISO , 6, 7,4 3,,6 8, 4,5,75-6 6,3 x,8 8 6, 5,5 3,5 46, 4,5, 6,75 3, - 6 8,5 x, 8, 5,5 9,5 47, 4, 3, 9, 5,5-6, x,, 3, 34, 55, 4, 5,,5 8,75-6 5, x, 6, 54, 64,6 8,6,4,4 7, 35, 6,6 8 9, x,5 9, 57, 76, 9, 9, 8, 3, 38,5 8,5 8 5, x 3, 5 5, 79,5 99,4 9,4,6 3,6 38, 5, 39,4 3, x 3, 3 3, 95, 9, 4, 3,8 36,8 46, 57,5 47,7 38, x 3, 4 4, 89, 8, 3,5 5,5 39,5 55,5 7, 4,5 5, x 3, Drilling lockbohrbild pattern DN 6 - DN Drilling lockbohrbild pattern DN6 - DN 4 Rz Rz.5.5 E5 E4 E E E3 E5 E4 E8 E E E
8 Needle valves with threaded connector DN 4 - DN 5 ØC Custom orders on request H3 open geöffnet A H4 geschlossen closed ody: steel, zinc plated stainless steel Spindle: steel stainless steel Rotary knob: aluminium aluminium O-Rings: FK FK H H H L Connection DN Thread L L A Ø C H H H H3 H4 Weight D DN PN Article-No. PN Article-No. SP-female thread DIN EN ISO 8-4 G /8 38, 8x,5 9, , 6 G /4 48, 8x, , ,3 G 3 /8 58 4, 8x, , ,47 G / 68 5, 8x, , ,66 6 G 5 /8 78 6, x, ,5 49 3,5 G 3 /4 78 6, x, ,5 49 3,5 5 G 8, x, , ,95 3 G /4 8, 36x, , ,6 4 G / 8 3, 36x, , , 5 G 3 4,5 36x, , , NPT-female thread ANSI/ASE /8-7 NPT 38 6,9 8x,5 9, , 6 /4-8 NPT 48, 8x, , ,3 3 /8-8 NPT 58,3 8x, , ,47 / - 4 NPT 68 3,6 8x, , ,66 3 /4-4 NPT 78 4, x, ,5 49 3,5 5 - / NPT 8 6,8 x, , ,95 3 /4 - / NPT 8 7,3 36x, , ,6 4 / - / NPT 8 7,3 36x, , , 5 - / NPT 3 7,7 36x, , , Female thread ISO /6 - UNF- 4 6,9 8x,5 9, , 6 / - UNF- 48, 8x, , ,3 8 9 /6-8 UNF- 58,7 8x, , ,47 3 /4-6 UNF- 6 4,3 8x, , ,47 7 /8-4 UNF- 7 6,7 8x, , ,66 6 /6 - UN , x, ,5 49 3,5 5 /6 - UN - 8 9, x, , , /8 - UN - 8 6,8 x, , ,6 3 7 /8 - UN - 8 9, 36x, , , 4 / - UN - 3 9, 36x, , ,
9 Needle valves for manifold mounting steel DN 6 - DN 4 øc O-Rings included in delivery H3 open geöffnet H closed geschlossen H A T D4 D3 T H L5 L5 ody: O-Rings: steel, zinc plated FK O-Ring L L L3 D L4 L6 L4 DN 6 - DN DN 6 - DN 4 Connection DN L L L3 L4 L5 L6 øc H H H H3 A DN D D3 D4 T T Weight For cylinderhead screw DIN EN ISO 476 (DIN 9) PN Article-No. ody flange with O-Ring-sealing 6 6, 9,5 35, 9, 8, - 4,5 8, x.5 8 5,5, 48, 35, 6,5-46, 33, x.5 5,5,7 5, 33,5 8,5-5, 38, x.5 3,,5 75, 38, 8,5-57,5 44, x ,5 9,5 93,5 76, 8,5 38, 7, 54, x.5 57, 7,, 95, 8, 47,5 76,5 6, x ,5 3, 43,,5, 6,, 76, x , 37, 69, 43, 3, 7,5 5, 9, x , 39,5 63, 33,5 4, 67, 4,, x.5 6 5, 9,7 6,4,5,3 6,8, ,,3 6,4,5,5 6,8, , 5,7 6,4,5,5 6,8, , 8,7 6,4,5,5 6,8, , 3,7 8,4 4,,9 9,, , 3,5 8,4 4,,3 9, 3, ,5 37,5,5 7,,3, 5, , 43,5 3,,,3 3, 7, ,5 57,5 3,,,3 3, 7, DN E E E3 E4 E5 E8 O-Ring General tolerances DIN ISO 768 Surfaces DIN EN ISO , 6, 7,5 5,5,5 9,5 4,5,75-6 6,3 x,8 8 7, 5,5 3,5 37, 4,5, 6,75 3, - 6 8,5 x,, 5,5 9,3 38,3 4,,7 9, 5, - 6, x, 3, 3, 34, 5,5 4,,5,5 8,75-6 5, x, 6 7, 54,5 65, 74,, 9,5 7, 35, 7, 8 9, x,5, 57, 76, 84, 9, 7, 3, 38,5 8,5 8 5, x 3, 5 8,5 79,5 99,5,, 3, 38, 5, 39, 3, x 3, 3 35, 95, 9, 3, 4, 37, 46, 57,5 47,5 38, x 3, 4 47,5 89, 8, 3,5 5,5 39,5 55,5 7, 4,5 5, x 3, Drilling lockbohrbild pattern DN 6 - DN Drilling lockbohrbild pattern DN 6 - DN 4 Rz Rz.5.5 E5 E4 E E E3 E5 E4 E8 E E E3 5 53
10 Needle valves for manifold insertion as cartridge type steel DN 8 - DN 6 H (open) (geöffnet) H (closed) (geschlossen) øc SW O-Rings included in delivery O-Ring A ody: O-Rings: steel, zinc plated FK H O-Ring F G E Connection DN A C E F G H H H SW DN O-Ring O-Ring Assembly torque [Nm] Weight PN Article-No. Screw-in threaded DIN EN ISO G½ A, G½ A 4, G¾ A 7, G A, ,7 x,6, x, , ,7 x,6 3,9 x, , ,47 x,6 3,94 x,6 5 +5, ,8 x,6,89 x, , DN G J K +. L max. H8 N max. O P min. R + S T +. W min. General tolerances DIN ISO 768 Surfaces DIN EN ISO G½ , ,9 8 G½ , ,9 3 G¾ , 43 4,9 4 6 G , 47 4,9 45 Drilling lockbohrbild pattern DN 8 - DN 6 J K G x A.5A.A x x P O T N S W R.5 x L 54 55
11 Flow control valves with threaded connector DN 4 - DN 5 Opening pressure:,5 Custom orders on request open closed ody: steel, zinc plated stainless steel Spindle: steel stainless steel Rotary knob: aluminium aluminium O-Rings: FK FK Connection DN Thread L L L A Ø C H H H H3 H4 Weight D DN PN Article-No. PN Article-No. SP-female thread DIN EN ISO 8-4 G /8 45, 8 8x,5 9, ,5 6 G /4 55, 35 8x, , ,36 G 3 /8 65 4, 4 8x, , ,5 G / 73 5, 48 8x, , ,68 G 3 /4 88 6, 57 x, ,5 49 3,37 5 G 7, 77 x, , ,7 3 G /4 43, 93 36x, , ,96 4 G / 43 3, 98 36x, , ,3 5 G 65 4,5 36x, , , NPT-female thread ANSI/ASE /8-7 NPT 45 6,9 8 8x,5 9, ,5 6 /4-8 NPT 55, 35 8x, , ,36 3 /8-8 NPT 65,3 4 8x, , ,5 / - 4 NPT 73 3,6 48 8x, , ,68 3 /4-4 NPT 88 4, 57 x, ,5 49 3, / NPT 7 6,8 77 x, , ,7 3 /4 - / NPT 43 7, x, , ,86 4 / - / NPT 43 7, x, , ,3 5 - / NPT 65 7,7 36x, , , Female thread ISO /6 - UNF- 49,5 8, 8x,5 9, ,5 6 / - UNF- 55,5 33,5 8x, , , /6-8 UNF- 67,7 4, 8x, , ,5 3 /4-6 UNF- 67 4,3 4, 8x, , ,5 7 /8-4 UNF- 77 6,7 5, 8x, , ,68 6 /6 - UN , 6, x, ,5 49 3,37 5 /6 - UN - 7 9, 77, x, , ,7 5 5 /8 - UN , 93, x, , , /8 - UN , 98, 36x, , ,3 4 / - UN ,, 36x, , ,
12 Flow control valves for manifold mounting steel DN 6 - DN 4 O-Rings included in delivery H3 geöffnet (open) H (closed) geschlossen A øc D4 D3 L5 L5 Opening pressure:,5 H O-Ring L L L3 D T T H4 H L4 L7 L6 L4 L6 DN 6 - DN DN 6 - DN 4 ody: O-Rings: steel, zinc plated FK Connection DN L L L3 L4 L5 L6 L7 øc H H H H3 H4 A DN D D3 D4 T T Weight For cylinderhead screw DIN EN ISO 476 (DIN 9) PN Article-No. ody flange with O-Ring-sealing 6 6, 8, 4,5 9, 6,4 4,5-4,5 8, , 8 x.5 8 5,5 8,7 63,5 35, 4, 68,5-46, 33, , 8 x.5 5,5, 7, 33,5 8, 75, - 5, 38, ,5 8 x.5 3, 5, 8, 38,, 85, - 57,5 44, , 8 x ,,4 4, 76,,, 38, 7, 54, ,5 x.5 57, 35, 7, 95, 6, 33, 47,5 8, 6, ,5 x ,5 35,6 65,, 5, 65, 6,, 76, ,5 x , 38,8 86, 43, 5, 9, 7,5, 9, ,5 36 x , 39,5 7, 33,5 4, 78, 67, 4,, , 36 x.5 6 5, 9,7 6,5,5,3 6,8, ,,3 6,5,5,5 6,8, , 5,7 6,5,5,5 6,8, , 8,7 6,5,5,5 6,8, , 3,7 8,4 4,, 9,, , 3,5 8,4 4,,3 9, 4, ,5 37,5,5 7,,3, 6, , 43,5 3, 9,,3 3,, , 57,5 3,,,3 3, 6, DN E E E3 E4 E5 E8 O-Ring General tolerances DIN ISO 768 Surfaces DIN EN ISO , 6, 7,4 33,5,6 8, 4,5,75-6 6,3 x,8 8 7, 5,5 3,5 44,8 4,5 8,7 6,75 3, - 6 8,5 x,, 5,5 9,5 48, 4,, 9, 5,5-6, x, 3, 3, 34, 55, 4, 5,,5 8,75-6 5, x, 6 7, 54, 64,6 8,6,4,4 7, 35, 6,6 8 9, x,5, 57, 76, 9, 9, 35, 3, 4, 8,5 8 5, x 3, 5 8,5 79,5 99,4 9,4,6 35,6 38, 5, 39,4 3, x 3, 3 35, 95, 9, 47, 3,8 38,8 46, 6, 47,7 38, x 3, 4 4, 89, 8, 3,5 5,5 39,5 55,5 7, 4,5 5, x 3, Drilling lockbohrbild pattern DN 6 - DN Drilling lockbohrbild pattern DN 6 - DN 4 Rz Rz.5.5 E5 E4 E E E3 E5 E4 E8 E E E
3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
Pressure Measurement Fittings
Siemens G 2018 Overview ll shut-off fittings can be secured onto walls, racks (72 mm grid) and vertical and horizontal pipes. This offers the advantage when assembling a plant that the shutoff fittings
Type 437. Type 437. Available designs. Cap H2 Adjusting screw with bushing. Axial needle 69 beering. Lock nut. Spring plate. Spring plate. Pin.
Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut Axial needle 69 beering 16 Spring plate 12 Spindle 54 Spring 2 Outlet body 17 Spring plate 57 Pin 61 Ball 7 Disc 1 Body Threaded
Flow Control Valves. Overview. Accessories Catalog. Needle Valves. Flow Control Valves. Pressure Compensated Flow Control Valves.
Overview Needle Valves DV, DVE & DVP Series (see page ) Flow Control Valves DRV & DRVP Series (see page ) Pressure Compensated Flow Control Valves SRVR Series (see page ) Check Valves RV & RVP Series (see
Table of contents. Attachments, accessories 161
Table of contents Attachments, accessories 6 Product overview Mounting kits for limit switches Mounting kits for proimity switches ocking devices Actuators Detents andles 60 6 Mounting kits for limit switches
Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
Ball Valves Gemels GE2 2-WAY HIGH PRESSURE BALL VALVES. Type and way of valve GE2 2-way high pressure ball valves
Stainless Steel Ball Valves Gemels 34.1.1 GE2 2-WAY HIGH PRESSURE BALL VALVES GE2 stainless steel GE2 G 1/2 DN13 4 4 4 4 A B Type and way of valve GE2 2-way high pressure ball valves Valves dimension of
BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
Behringer Ball Valve Ordering Code
Ball Valve Catalog Behringer Ball Valve Ordering Code 1 Behringer 2-Way Ball Valves Block Body Valves with Threaded Connections Size Range: 1/4-1 Steel Material Delrin Ball Seats (Others available on request)
ACCESSORIES AND DIAPHRAGM SEAL
ACCESSORIES AND DIAPHRAGM SEAL TA102 TA201 TA202 TA203 TD101 TD103 TD104 TD202 Data sheet H20022a 05/2017 TD301 TD302 TD303 Trafag Italia Srl Via Cremona 1 20025 Legnano (Mi) Tel. +39 0331 59 23 97 Fax
1 body / (DN15-DN20) J / (DN25-DN50) J / (DN65-DN80) K
Type: Description: standard safety valve angular shape metal sealing spring-loaded enlarged outlet flanges acc. to EN1092-1 or ANSI: inlet: PN16-PN63 outlet: PN16-PN40 cone liftable with gas-tight cap
funnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
FLOW CONTROL VALVES A5-1 PN# / / ACC
FLOW CONTROL VLVES Flow Control Valves The HYDC family of flow control valves permit safe, simple and repeatable control of hydraulic fluids at operating pressures to psi. The standard slotted control
Type 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
A type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
Angle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
BALL VALVES FILTERS TEST POINTS 8
BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves
NAF-Triball ball valve
NAF-Triball ball valve DN 10-100 for max. 40bar Fk 25.622(12)GB 12.09 Primary characteristics NAF-Triball is a full bore ball valve designed for shut-off, on-off functions as well as control application
Breathers. BF...3 & BF...4 Series INNOVATIVE FLUID POWER. ø D1 HEX. Specifications. Hydraulic Symbols. Model Code. Dimensions BF P 3 G 10 W 1.0 /.
BF...3 & BF...4 Series Maximum flow rate - 31 scfm / 230 gpm at 0.04 bar Epoxy coated steel cap Zinc-plated internals Threaded connection Pressurized breather with relief valve (optional - BF3 only) Phenolic
Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
Hydraulic & Offshore Supplies GE3 3-Way High Pressure Ball Valves Brochure YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE www.gemels.it
SVF03. Normal-Sicherheitsventil, fe. Type: SAFETY VALVE, FLANGE DESIGN SYSTEM VALVES. Range of application: Description:
Type: Description: standard safety valve angular shape metal sealing spring-loaded flanges acc. to EN1092-1 or ANSI inlet: PN16-PN63 outlet: PN16-PN40 cone liftable with gas-tight cap TÜV certified Range
Data sheet. D-2011/05/ Date: 02/2013. Type TSA6 CNG. Inline breakaway Coupling. for bus and truck fuelling stations
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TSA6 CNG Inline breakaway Coupling for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY. General Description Receptacle insert Eccentric actuator
* * Data sheet DA A (ATEX) Differential pressure measuring device for potentially explosive areas
09015062 DB_EN_DA10_ATEX Rev. ST4-A 03/18 *09015062* Data sheet DA10... 0A (ATEX) Differential pressure measuring device for potentially explosive areas Gas explosion protection Zone 1 and 2, gases and
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
CHECK VALVE - DIRECT OPERATED - Series VC4V SPECIFICATIONS PERFORMANCE CURVES VC4V03 VC4V10 VC4V06
CHECK VLVE - DIRECT OPERTED - Series VV Veljan Direct operated Check Valve Series VV are poppet type and designed for a maximum pressure of 35 bar and a flow capacity rangg from 18 l/m for a 3/8 valve
Swivel Joint Heads (Basic Unit)
Swivel Joint Heads (Basic Unit) Design Configuration Weld edge preparation according to DIN 2559 or ANSI B16.25 Grease nipple/ ball Lifetime greasing Grease nipple only on request Stator Rotor Internal
BALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
35 & 35D. P.O. Box 1388 West Sacramento, CA (916) Fax: (916)
35 & 35D P.O. Box 1388 West Sacramento, CA 95691 (916) 372-5411 Fax: (916) 373-0952 www.hecogear.com Model 35 Installation Dimensions Model 35CF2-66-1 (Illustrated with Code 2 Flanged Output Shaft) 1.10
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2 way angle seat globe valve has a low maintenance aluminium piston actuator. The valve spindle is sealed by a selfadjusting
Data sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
Type 427, 429. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 427, 429 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.05-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
AV 23 Balancing valves SETTER Inline
AV Balancing valves SETTER Inline Application Direct reading and balancing valve with visual flow indication. Correct balancing of circuits ensure optimum efficiency of the system and can therefore help
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
Stop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C)
ARI-EURO-WEDI Stop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C) ARI-EURO-WEDI - Fig. 070 Page 2 ARI-EURO-WEDI - Fig. 071 Page 2 Fig. 070 ARI-EURO-WEDI - Hood valve Fig.
PIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
Pilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
For ball valves
Soft seal Ball valve Float ball valve Flange PN16-40 DN15-200 For 1.4408 ball valves Range of application: In industrial facilities, oil and chemical industry and related manufacturing industries Temperature
AXIAL PISTON MOTORS MF S E R I E S 2 0 C L O S E D C I R C U I T
AXIAL PISTON MOTORS MF GENERAL DESCRIPTION Axial piston fixed displacement motors, Series 20, are of swash plate construction with preset displacement, and are intendent for closed circuit operation. The
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
BUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
GE2 G 1/2 DN A B
GE2 +GE2 CARBON STEEL Type: ball valve GE 2 way Body: block Material: 1,0737 Ball seats: from DN4 up to DN25 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 500 Bar depending on valve size and seal s
3/2-Way Valve DN 15 up to DN 50
/-Way Valve 78 DN up to DN Pneumatically operated /-way valve in stainless steel for the control of neutral, slightly aggressive and highly aggressive media. compact design Unaffected by lightly contaminated
Type 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 455, 456 Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 468.08-E 462.01-D 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 9 Bonnet 12 Spindle 54
Angle Seat Control Valve 7020
Angle Seat Control Valve 72 DN 8 up to DN 8 PN 4 Pneumatically operated control valves for neutral through to highly aggressive media. Integrated positioner Compact design All parts contacting the fluid
For industrial applications For marine applications With proximity switch. Piston type flow switches
JJ For industrial applications JJ For marine applications JJ With proximity switch Piston type flow switches DB_Piston_type_flow_switches 01/2016 199 Piston type flow switches Piston type flow switches
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 437 Safety Relief Valve pring loaded Metric + US Unit Fact The-Safety-Valve.com Deign 40 Cap H2 18 Adjuting crew with buhing 19 Lock nut 16 Spring plate 12 Spindle 54 Spring Axial needle 69 beering
Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
Spare parts list ( ) HD 2.3/26 CV
Spare parts list (1.107-077.0) HD 2.3/26 CV 08.12.2015 www.kaercher.com EN Table of contents Order instructions HD 2.3/26 CV (1.107-077.0) 200 Spare parts list G 2600 PH 10 Frame 20 Pump set 21 Cylinder
OMT Technical Information Shaft Version
A: Cylindrical 40 shaft C: Parallel key A12 8 70 DIN 6885 Keyway deviates from standard B: Cylindrical 1.5 in shaft D: Parallel key 3 /8 3 /8 2 1 /4 in B.S. 46 Keyway deviates from standard 45 C. Involute
Type 455, 456. Type 455, 456. Flanged Safety Relief Valves spring loaded
Type 455, 456 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Type 456 Packed lever H4 Closed bonnet Materials 08/02 Balanced bellows design 08/04 How to order Numbering system 08/06 Article
The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications.
Butterfly Valve ParaSeal range The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications. Features The field replaceable seat fully
DatA sheet. D-2011/05/ Date: 02/2013. Type TSA2 CNG. Inline breakaway Coupling. for car fuelling stations FUTURE. TECHNOLOGY. TODAY.
DatA sheet D-2011/05/00160-3-3 Date: 02/2013 Type TSA2 CNG Inline breakaway Coupling for car fuelling stations FUTURE. TECHNOLOGY. TODAY. DATA sheet General Description Receptacle insert Eccentric actuator
516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
RA / Pressure Reducing Valve, Pilot Operated Model DR (Series 5X) Ordering code 1/ PSI (350 bar) GPM (400 L/min)
R 26 892/06.98 Pressure Reducing Valve, Pilot Operated Model DR (Series 5) Size 10 to 0... 5000 PSI (50 bar)... 105 GPM (400 L/min) R 26 892/06.98 Replaces: 05.94 Pilot operated pressure reducing valve
2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
Technical Data, Dimensioning, Mounting
6 Bosch Rexroth AG R310EN 3105 (2005.06) and Shafts Technical Data, Dimensioning, Mounting Speed v max = 5 m/s Acceleration a max = 150 m/s 2 Operating temperature 20 C to +100 C Dimensioning The load
Data sheet. D-2011/05/ Date: 07/2013. Type TK4 CNG. CNG Fuelling Nozzle. for cars. WEH - We Engineer Hightech
Data sheet D-2011/05/00160-4-3 Date: 07/2013 Type TK4 CNG CNG Fuelling Nozzle for cars WEH - We Engineer Hightech General Description Sliding sleeve Media inlet Features Compatible with receptacles acc.
Data sheet. D-2011/05/ Date: 07/2013. Type TK1 CNG. CNG Fuelling Nozzle. for time filling of cars. WEH - We Engineer Hightech
Data sheet D-2011/05/00160-4-3 Date: 07/2013 Type TK1 CNG CNG Fuelling Nozzle for time filling of cars WEH - We Engineer Hightech General Description Sliding sleeve Media inlet Features Compatible with
Preliminary. SS66/SS88 Split Shaft PTO Parts List and Service Manual
SS66/SS88 Split Shaft PTO Parts List and Service Manual Auxiliary PTO s are an example installation and are not included with splitshaft PTO Model Number Construction SS 66 U2 X3 - A 00 XX X SS Split Shaft
HIGH PRESSURE BALL VALVES
HIGH PRESSURE BALL VALVES HIGH PRESSURE BALL VALVES TABLE OF CONTENTS Page Description 3 Valve Design 3 Product Features 3 Available Options 3 2-Way with NPT and SAE Connections 4 2-Way with SAE Split
Fittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
Angle Seat Valves by Schubert & Salzer
Angle Seat Valves by Schubert & Salzer Angle seat valves contact factory Angle seat valves Angle Seat Valve 7010, reinforced design stainless steel 2" up to 3" 580 psi diaphragm actuator, stainless steel
MO Declutchable Manual Override Gearbox EL-O-Matic F-Series Actuators option
EFG.07.MO.EN, Page 1 of 2, Rev. 0 May 2018 MO Declutchable Manual Override Gearbox s option Light weight aluminum design and suitable for indoor and outdoor use. Easy operation. Suitable for quarter turn
MSC-125 and MSC-160 Manifolds for Steam Distribution and Condensate Collection.
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
HIGH PRESSURE - pumps
Gear pumps TRAE Positive displacement, external gear pumps intended for hydraulic systems of machines and devices. Material Housing Aluminium Mounting plate Aluminium (groups 1 and 2), cast iron (group
Type. Type 457, , 458. Flanged Safety Relief Valves spring loaded
Type Type 458 Packed lever H4 Closed bonnet Conventional design 457, 458 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Materials Conventional design 09/02 Balanced bellows design 09/04
Spare parts list Pentruder Modular Drilling System
Spare parts list Pentruder Modular Drilling System Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M
TECHNICAL CATALOGUE BALL VALVES: VIENNA
TECHNICAL CATALOGUE BALL VALVES: STANDARD LOW BALL VALVES: Suitable for domestic water ServiceS, heating, airconditioning plants and compressed air SyStemS. BALL VALVES 116 BALL VALVE, STANDARD LOW size
Type. 437 Safety Relief Valves spring loaded
Type Packed knob H4 437 Safety Relief Valves spring loaded Packed knob H4 Flanged connection Cap H2 Contents Chapter/Page Materials Available designs 01/02 Available designs materials 01/03 How to order
3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
SAB 202 Screw compressor units. S pa re parts m an ual
SAB 202 Screw compressor units S pa re parts m an ual en 1 Spare parts list for SAB 202 Pos Designation No Part no Complete compressor LF, aut Vi 4161059 Complete compressor LF, man Vi 4161060 Complete
QUICK SELECTION GUIDE
SELECTION GUIDE SAE HYDRAULIC 4-BOLT AND SPLIT FLANGED FITTINGS IN CARBON STEEL AND STAINLESS STEEL ISO 14001 Registered Environmental Management ISO 9001 Registered Quality Management OHSAS 18001 Registered
Stainless Steel Air-Vane Motors
Screwdriving technology Automation Air motors Air tools Stainless Steel Air-Vane Motors up to 1.2 kw / 1.6 Hp corrosion free oilfree sealed The DEPRAG line of air motors merges an attractive cost to power
PILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V
PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and work Internal Dra on the prciple of hydraulic balancg. These valves are used to limit
Type 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.05-E 462.01-D Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring
2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
Data sheet. D-2011/05/ Date: 02/2013. Type TK16 CNG. CNG Fuelling Nozzle. for cars at self-service fuelling stations
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TK16 CNG CNG Fuelling Nozzle for cars at self-service fuelling stations FUTURE. TECHNOLOGY. TODAY. General Description 1 Impact protection 2 Actuation
PILOT OPERATED SEQUENCE VALVE - Series VR4S
PILOT OPERTED SEQUENCE VLVE - Series VRS Veljan Sequence Valve Series VRS are pilot operated controls and enable a hydraulic system to operate a sequence. Fluid is allowed to pass to a secondary system
Type 441 ANSI 442 ANSI. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 ANSI 442 ANSI Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.04-E Conventional design 40 Cap H2 18 19 16 Adjusting screw Lock nut Upper spring plate
Liquid filters _ 302. Deaerators. Product Bulletin
Liquid filters Deaerators _ 32 Product Bulletin WWW.VAF.NL Introduction VAF Instruments liquid filters/deaerators are used in combination with VAF flowmeters. The use of liquid filters protects downstream
Rack and Pinion Actuator BR 31a Typ SRP und DAP
Forged stainless steel Rack and Pinion Actuator BR 31a Typ SRP und DAP Application: The stainless steel actuators are a corrosion resistant rack and pinion actuator particular engineered for corrosive
50 Hz PX CHANNEL 1. Performance curves. data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s. Tolerances acc.
![50 Hz PX CHANNEL 1. Performance curves. data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s. Tolerances acc.](/thumbs/73/69367420.jpg "50 Hz PX CHANNEL 1. Performance curves. data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s. Tolerances acc.")
Performance curves 50 Hz [m] 11,6 data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s Head Tolerances acc. ISO 9906 Annex A 11,2 10,8 10,4 10 9,6 9,2 8,8 8,4 8 7,6 7,2 6,8 6,4 6 5,6
VALVES RANGE FOR OPEN LOOPS T E C H N I C A L C A T A L O G
VALVES RANGE FOR OPEN LOOPS T E C H N I C A L C A T A L O G Valves range for open loop 2 18/07/2017 Valves range for open loop CONTENT CHECK VALVES 5 Direct operated valves 7 Pilot operated valves 11 Counterbalance
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
Dimensions / Technical Data / Order Codes
Flow Control alves / / Throttle and Shut-Off alve (In-Line ssembly) ød2 Smax 8 9 0 1 2 G2 L2 1 in both directions S, T and S threaded connections anel mounting nuts available on request zinc/iron-plated
Hydraulic Accessories
Hydraulic Accessories Valves, Clamps, & Reservoir Accessories DRAFT /13/3 About HYDAC HYDAC stands for worldwide presence and accessibility to the customer. HYDAC has over 1 distributors worldwide and
Visual Level Indicators (VLI) Plastic & Top of Tank Series Series Type Material Pipe Operating Operating Page
Visual Level Indicators (VLI) Plastic & Top of Tank Series Series Type Pipe Operating Operating Page O.D. x s Pressure Temperature Plastic thread 10 25670 PVDF 63.0 x 3.6 2.5-10 thread max. 140 C 61 Plastic
SIHI multi Type MSC. Modular multistage pumps. Description. Construction. Applications. Optional special designs. Materials.
Modular multistage pumps SIHI multi Type MSC Description The SIHI multi MSC range of horizontal, ring-section multistage pumps have been designed for long-term reliability when pumping high pressure liquids.
Boxer 700HDX Parts Manual
BIG POWER IN ALL PLACES Phone: Sales - 800-831-0042, Parts and Service - 800-255-8839 www.boxerequipment.com Boxer 700HDX Parts Manual SN 5082 and Higher Part No. 76345-820 Manufactured by: Morbark, LLC.
Quick Release Couplings & Live Swivel Joints
hardy spicer HOSE FITTINGS DRIVESHAFTS Quick Release Couplings & Live Swivel Joints, 17-1 Discovery Road, Dandenong South, Victoria, 175 Toll free Ph: 100 04 67 DISCLAIMER Disclaimer The information and
Rotary inlets for pressurised oil, compressed air
Rotary inlets for pressurised oil, compressed air Product data sheets Rotary inlets for pressure oil, single channel 0086-010-size-160 9.03.00 Rotary inlets for pressure oil, two- channel 0088-226/326-size-010040
Swivel Joints Rotary Unions
Maschinenbau GmbH & Co. KG Swivel Joints Rotary Unions since 1970 Knowledge and experience General Information We about us Klaas Maschinenbau GmbH & Co. KG was founded in the year 1970 and is an independent
Series P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
MINIMAT Screwdrivers. Handheld Screwdriver pneumatic
Screwdriving Technology Automation Air Motors Air Tools MINIMAT Screwdrivers The basic solution for almost all screwdriving tasks angle head design torque from 0.3-65 Nm / 3 to 575 in.lbs robust highest
VJO1-06/S. Functional Description HA /2010. Check Valves. Replaces HA /2008. Size to 06 (1/4) bar (4600 PSI)...20 L/min (5.
Check Valves VJO1-06/S Size to 06 (1/4)...320 bar (4600 PSI)...20 L/min (5.3 GPM) HA 5004 11/2010 Replaces HA 5004 4/2008 Small dimensions Two models Poppet design Leak-free closure in one direction VJO1-06/Sx-1